Nizkopodni priklopnik nakup rabljenega (590)

Stanje: novo, največja dovoljena obremenitev: 8.410 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, Leto izdelave: 2025, * KA - TA - R 11.9 ----Brakes: * Wabco EBS (electronic braking system) * Emergency release device for spring-loaded brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Drawbar / Flange Eye: * Height-adjustable drawbar by 300 mm with 40 mm flange eye ----Electrics / Lighting: * Tire pressure monitoring with display capability in truck via EBS signal (no truck-side installation required) * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear, operated via reverse gear Iedjxf Skpepfx Ab Uoik ----General Attachments: * Mechanical BPW landing gear at front * Two mechanical folding supports at rear * Plastic toolbox approx. 750 x 350 x 300 mm, front right on chassis * Bolt-on underrun protection * Plastic quarter mudguards * Two-step access in front of the front panel, left side ----Chassis: * High-tensile fine-grain steel chassis ----Tipping Platform: * Net hooks at each location of the central locking as well as 2 at the front wall * Steel pallet – 3-way tipper body with reinforced 600 mm Strong drop sides * Continuous side walls with internal tube reinforcement – without intermediate stanchions – foldable with sideboard spring assist * Rear stanchions bolted * Combination rear wall with steel fold-out doors – two-leaf, asymmetrically split – can swivel and be locked at 270°, not foldable, with additional pendulum frame for automatic rear wall opening during tipping * Locking via galvanized rotary bolt at rear and central locking * Deactivation function for automatic rear wall opening when tipping backwards with open door * Rear mounting rail for loading ramps ----Load Securing: * One 5 t lashing ring in each corner, plus four 3 t lashing eyes on each side recessed into the outer frame * 4 mm steel floor plate made from S 420 MC 4 fine-grain steel ----Ramps: * 1 pair of aluminium access ramps approx. 3,310 × 400 × 105 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Rear lockable storage compartment for ramps recessed in the chassis below the loading area ----Painting: * Chassis, drawbar, tipping platform, front panel, underrun protection, rear stanchion, rear folding supports and access step all hot-dip galvanized * Side walls and tailgate coated in RAL 3003 ruby red * Axles, springs, air reservoir and landing gear painted in black ----Information: * Reinforced superstructure with load securing certificate to EN 12642 XL * New vehicle with manufacturer warranty * Subject to prior sale and errors excepted ----Delivery time: * Immediately available ex Egestorf

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: W09T242247GR27178, lastna masa: 6.260 kg, največja dovoljena obremenitev: 17.740 kg, skupna masa: 24.000 kg, konfiguracija osi: 2 osi, prva registracija: 11/2025, dolžina tovornega prostora: 4.450 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 400 mm, skupna dolžina: 13.950 mm, skupna širina: 300 mm, skupna višina: 1.220 mm, vzmetenje: zrak, velikost pnevmatike: 285/70R19,5 --/147J, medosna razdalja: 6.844 mm, barva: modra, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2007, Oprema: ABS, V ponudbi je 24-tonski polpriklopnik z nizkim podom iz podjetja Gebr. Recker, letnik 2007. Primeren za prevoz gradbenih, kmetijskih in gozdarskih strojev. Pred približno 60.000 km je bil generalno obnovljen: - nova električna napeljava Iijdpfxjxx U H Hj Ab Uok - nova hidravlika (cevi in vodniki) - nov zračni sistem (vključno z ABS in EBS) - zadnji vozni del (zadnja os) - na novo peskano, cinkano s pršenjem in lakirano Nizki pod se lahko podaljša do 2,5 m v dolžino (dolžina v zaprtem stanju: 4,45 m; povsem izvlečen: 6,95 m) V širino ga je mogoče razširiti do 3 m (zložen: 2,55 m; raztegnjen: 3,00 m) Nakladalna višina na ploščadi nizkega poda je 40 cm, v poglobitvah 20 cm.

Stanje: novo, lastna masa: 2.980 kg, največja dovoljena obremenitev: 10.020 kg, skupna masa: 13.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.280 mm, širina tovornega prostora: 2.480 mm, vzmetenje: jeklo, barva: drugo, vrsta prenosa: drugo, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Per ramp approx. 2,700 mm long x 560 mm wide, ramps with grating, loading height: 840 mm, 12 lashing rings rated at 2.5 t each, 8 lashing rings rated at 6 t each, steel side panels, foldable and removable, wooden floor boards 50 mm, rear of loading area chamfered, internal load area width 2,480 mm, removable rear stanchion, open front for through-loading, Iiodpfx Aoxxk Hieb Ujk Also available with a load area length of 5,300 mm!! Rental price from €550 -- Subject to typographical errors, mistakes and changes. Sample images -- For more data: ! More details: !

Stanje: rabljeno, največja dovoljena obremenitev: 18.000 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/1991, dolžina tovornega prostora: 8.200 mm, širina tovornega prostora: 2.500 mm, Oprema: ABS, * ABS * BPW axles ----Superstructure: Low-loader trailer (2200+6000 mm), loading height approx. 900 mm, rear end tapered, drive-on height approx. 750 mm, steel/wood floor, extendable to 3 m width, spring-assisted loading ramps, lashing rings. Isdowdb Ttepfx Ab Ujik Sale only to traders. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE!!!!! ALL INFORMATION PROVIDED WITHOUT GUARANTEE, PARTICULARLY REGARDING EQUIPMENT AND ACCESSORIES. All purchase contracts, invoices, pro forma invoices, orders, and sales discussions are subject to our General Terms and Conditions (see imprint for details).

Stanje: rabljeno, največja dovoljena obremenitev: 30.310 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2021, naslednji pregled (TÜV): 07/2027, dolžina tovornega prostora: 10.000 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.860 mm, skupna višina: 3.450 mm, Fliegl VTS 400 Low-loader Heavy-duty trailer Turntable trailer First registration: 24.02.2021 TÜV (inspection valid until): 07/2027 Gross weight: 40,000 kg / 24,000 kg Payload: 30,310 kg Unladen weight: 9,690 kg Overall dimensions: 11,850 mm x 2,860 mm x 3,450 mm Loading length: 10,000 mm Load bed: 7,150 mm including 850 mm inclined approach Loading height: 900 mm Iodpfxex Hrg Nj Ab Usik 1st pair of wheel recesses after gooseneck in the load bed, bottom length approx. 1,600 mm, 400 mm deep 2nd pair of wheel recesses between the axles in the load bed, bottom length 600 mm, 300 mm deep Widenings to 3,000 mm Warning signs Rotating beacon Large lashing package: 1 pair of recessed ring lashing eyes at the front on the gooseneck, each rated for 5 t 4 pairs of lashing holes in the outer frame, each 5 t (for lashing strap hooks) 8 pairs of lashing mushrooms recessed on top and sides of the outer frame, each 10 t 2 x at the front on the gooseneck 5 pairs of stanchion pockets recessed in the outer frame 1 pair of additional folding lashing eyes recessed in the floor, each 10 t 1 x inside next to the main frame at the start of the low bed 2 pairs of additional folding lashing eyes, each 10 t 1 x on gooseneck (protruding) 1 x recessed in the floor behind the last axle Excavator arm recess 1,800 mm long, 150 mm deep Drawbar 50 mm Air suspension with raise/lower valve, can be operated separately BPW drum brakes Tyres: 235 / 75 R 17.5" Steel rims in twin configuration Leaf suspension Axle load detection via EBS CAN bus signal Ramps 2,800 mm x 750 mm with hydraulic operation Hydraulic lateral displacement ATTENTION !!!!! PLEASE READ CAREFULLY !!!!! We expressly reserve the right to prior sale, as this item is also offered on other platforms. We strongly recommend an inspection and check to ensure that no false impressions arise regarding the condition and suitability for the buyer. Inspections and checks are possible and explicitly welcome at any time by appointment!!! The internal measurements stated are approximate values. Subject to errors and typing mistakes, information provided without guarantee! TRADE-INS POSSIBLE FOR ALMOST ANYTHING!!! PART-EXCHANGE AND BALANCE PAYMENTS POSSIBLE!!! Exhibition site: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday to Friday 8:30 a.m. to 5:00 p.m., Saturday 8:30 a.m. to 2:00 p.m. !!! Over 500 new and used trailers in stock at all times!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Stanje: rabljeno, največja dovoljena obremenitev: 21.410 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2014, naslednji pregled (TÜV): 01/2026, dolžina tovornega prostora: 9.390 mm, širina tovornega prostora: 2.500 mm, skupna širina: 2.540 mm, skupna višina: 3.250 mm, Oprema: ABS, Ladebett: 8360 mm, verbreiterbar auf 3000 mm, Schräge hinten: 1020 mm, Ladehöhe Bett: ca. 930 mm, hydraulische Auffahrrampen seitlich verschiebbar (LxB) 3600x700 mm, 2 x Klappstützen hinten, 12 x Zurrbügel je Seite, 3 x Zurrtaschen je Seite, gekröpfte Zugeinrichtung, 1 x Rundumkennleuchte, ausziehbare Warntafeln, ABS, EBS, GIGANT Achsen, Radzierblenden aus Edelstahl, Trommelbremsanlage, Luftfederung mit Hebe- und Senkvorrichtung, LED-Seitenmarkierungs- und Rückstrahlerleuchten, Staukasten, das Fahrzeug kann mit Werbefolien beklebt und/oder beschriftet sein. Unser Angebot beinhaltet grundsätzlich keine neue TÜV-Abnahme. Falls eine neue TÜV-Abnahme gewünscht wird, unterbreiten wir Ihnen gerne ein Angebot unserer Partnerwerkstätten! Das Fahrzeug kann mit Werbung beklebt und/oder beschriftet sein. Es gelten unsere allgemeinen Liefer- und Zahlungsbedingungen. Iodjwbmcnjpfx Ab Uoik Gerne erstellen wir Ihnen für dieses Objekt ein Finanzierungs- oder Leasingangebot. Bitte sprechen Sie uns an!

Stanje: novo, največja dovoljena obremenitev: 8.410 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, Leto izdelave: 2025, * KA - TA - R 11.9 ----Brakes: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizing aggregate ----Drawbar / Flange towing eye: * Drawbar height-adjustable by 300 mm with 40 mm flange towing eye Iijdpsxf Sk Asfx Ab Usk ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal – no truck-side installation required * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear, activated via reverse gear ----General mounted components: * Mechanical BPW landing gear at the front * 2 mechanical foldable supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm at the front right side of the chassis * Bolt-on underrun protection * Plastic quarter mudguards * Two-step access in front of the bulkhead on the left side ----Chassis: * Chassis made of fine-grain steel ----Tipper body: * Mesh hooks positioned in the central locking bearings and 2 pieces on the bulkhead * Steel pallet – three-way tipper body with reinforced 600 mm Strong side walls * Full-length side walls at the top with internal pipe reinforcement – without centre stanchions – foldable with side wall spring lifters * Rear stanchions bolted * Combination steel double-wing rear doors, asymmetrically split, swiveling through 270° and lockable – not foldable – with additional swinging frame for automatic tailgate opening during tipping * Locking via galvanized rotary bolt mechanism at the rear and central locking * Deactivation function for automatic tailgate operation when tipping backwards with open wing doors * Rear mounting rail for loading ramps ----Load securing: * One 5 t lashing ring in each corner, plus four 3 t lashing rings set into the outer frame on each side * 4 mm floor plate made from S 420 MC 4 fine-grain steel ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t / pair), suitable for rubber-tyred and tracked vehicles * Lockable storage compartment integrated below the loading area in the chassis, accessible from the rear ----Paintwork: * Chassis, drawbar, tipper, bulkhead, underrun protection, rear stanchion, rear foldable supports, and access step hot-dip galvanized * Side walls and tailgate painted in RAL 3003 ruby red * Axles, springs, air tanks, and landing gear painted black ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to prior sale and errors ----Delivery time: * Immediately available ex Egestorf

Stanje: novo, lastna masa: 3.320 kg, največja dovoljena obremenitev: 11.900 kg, konfiguracija osi: 2 osi, skupna dolžina: 6.100 mm, skupna širina: 2.500 mm, vzmetenje: jeklo, nosilnost: 8.580 kg, Oprema: ABS, UPORABNE DIMENZIJE PLATOJA: š. 2500 x d. 6100 mm GRAVITACIJSKO NAGIBNI PLATO S POČASOVALNIM VALJEM POVRŠINA PLATOJA KOMBINACIJA JEKLA / LESA REZERVNO KOLO ZADNJE RAMPE S POMOČJO VZMETI Isdpfxex E Uxrs Ab Uoik VIŠINSKO NASTAVLJIVA VLEČNA KLJUKA Z BNA OBROČEM 68x42 8 PRITRDILNIH TOČK HIDRAVLIČNA PODPORA Z ROČNO ČRPALKO PNEVMATIČNI ZAVORNÍ SISTEM Z ABS SHRANJEVALNI PREDAL ...

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 897 kg, največja dovoljena obremenitev: 2.603 kg, skupna masa: 3.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 5.070 mm, širina tovornega prostora: 2.100 mm, velikost pnevmatike: 10, Leto izdelave: 2025, Scope of supply: 1x Car Transporter Machine Trailer, tiltable, with winch and ramp, 507x210cm, 3500kg Ijdsxyzr Sopfx Ab Uoik Description: Our machine transporter / car transporter is the ideal solution for moving standard vehicles and machines. Thanks to the low loading angle, achieved by the hydraulic system and ramp, more vehicles can be transported with ease compared to conventional car transporters. With a loading bed length of 5070 mm and a payload of up to 2624 kg, our trailer is perfectly suited for transporting larger and heavier vehicles as well as loads. The transport platform is made from non-slip, waterproof plywood, ensuring additional safety. Comfort has not been overlooked: the integrated winch, integrated lashing eyes, and automatic jockey wheel make handling significantly easier. Technical specifications: - 3 axles - Winch - Lashing eyes - Hydraulic system - Automatic jockey wheel - Ramp with shock absorber - Welded, hot-dip galvanized frame Gross Vehicle Weight: 3500kg Unladen Weight: 897kg Payload: 2624kg Loading Bed Length: 5070mm Loading Bed Width: 2100mm Overall Width: 2210mm Overall Length: 6630mm Overall Height: 940mm Manufacturer: Martz Trailer Type: Car Transporter Drawbar Type: V-drawbar Floor: Screen-printed plywood floor Frame Type: Welded Frame Material: Steel Applications: Machine transport, car transport, heavy load transport

Stanje: novo, lastna masa: 7.300 kg, največja dovoljena obremenitev: 26.700 kg, skupna masa: 34.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.000 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Šasija: vroče pocinkana, lesen pod s 70 mm debeline, 18 pritrdilnih obročev, 12 žepov za kole, 2 rampi, vsaka dolžine 3.110 mm x 760 mm širine, plezalni trak na zunanji strani ramp in zadnji klančini, hidravlične enodelne rampe, višina nalaganja: 880 mm, vključuje prikazovalnike obremenitve osi. Doplačila: zadnja os kot krmiljena os: 3.500 €, opozorilne table + razsvetljava in rotacijska luč: 200 €, razširitev na 3 m z lesenimi vložki: 300 €, hidravlični premik ramp: 1.000 €. -- Pridržujemo si pravico do napak v tisku, sprememb in dopolnitev, slike so simbolične -- Več podatkov na:! Iedpfxsxw T Dbj Ab Ujik

Stanje: rabljeno, največja dovoljena obremenitev: 2.825 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, prva registracija: 04/2012, naslednji pregled (TÜV): 12/2026, dolžina tovornega prostora: 3.490 mm, širina tovornega prostora: 1.710 mm, višina nakladalnega prostora: 390 mm, prostornina tovornega prostora: 2 m³, skupna širina: 2.200 mm, skupna višina: 2.500 mm, Excavator trailer, machinery trailer with aluminium trough, 4 lashing eyes per side, aluminium ramps approx. 1950x430 mm, galvanised chassis, AL-KO axle(s), overrun brake, handbrake, jockey wheel, vehicle may be covered with advertising stickers and/or lettering. Our offer generally does not include a new MOT. If a new MOT is required, we will be happy to offer you this service via our partner workshops! Vehicle may be covered with advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply. We are also happy to provide you with a finance or leasing offer for this unit. Please contact us! Iisdpjwm T E Tofx Ab Uok

Stanje: novo, največja dovoljena obremenitev: 8.850 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2024, * KA-TA-R 11.9 "Masterline" ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem load equalization unit ----Drawbar / Flange Eye: * Height-adjustable drawbar (approx. 300 mm adjustment range) with 40 mm flange towing eye ----General Attachments: * Jost mechanical landing gear at the front * 2 mechanical hot-dip galvanized folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, on the right-hand side * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS tire pressure monitoring system ----Tipper Body: * Net hooks at sides and rear in the central locking compartments, as well as 2 units on the front wall * Steel palletized 3-way tipper body (continuous side walls—without central stanchions—foldable with board spring-lifter) * Rear stanchions bolted * Combination steel double-wing rear doors, asymmetrically divided, can be opened and locked at 270°, not foldable—with additional swinging frame for automatic rear tailgate opening during tipping process; locking via galvanized locking rods and central locking * Deactivation function for automatic rear tailgate operation when tipping backwards with open wing door * 4 mm steel chequer plate floor * Rear mounting rail for loading ramps ----Load Securing: * One 5 t lashing ring per corner * Four 3 t lashing rings each side, recessed into the outer frame ----Ramps: * 1 pair aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable rear storage compartment beneath the loading area, integrated into the chassis ----Paintwork: * Drawbar, front wall, tipper body, rear stanchions, underrun protection, and mechanical supports hot-dip galvanized * Side walls and tailgate painted in RAL 9010 pure white * Side wall painting in other RAL color shades available for an additional charge Iiodpfsl Thymsx Ab Usk * Axles, springs, flange eye, air tanks, and landing gear painted in black ----Information: * Reinforced body with cargo securing certificate according to EN 12642 XL * New vehicle, without initial registration, with manufacturer’s warranty * Errors and prior sale excepted ----Delivery time: * Immediately available ex works Egestorf on the A7 Motorway

Stanje: novo, lastna masa: 7.160 kg, največja dovoljena obremenitev: 31.900 kg, konfiguracija osi: 3 osi, vzmetenje: jeklo, nosilnost: 24.740 kg, Oprema: ABS, NAGIBNA PLATFORMA Z ELEKTROPUMPO 24V HIDRAVLIČNE RAMPE MEŠANA POVRŠINA PLATFORMA: PLOČEVINA, LETVICE IN LES UPORABNE DIMENZIJE: 2550mm x 7500mm VIŠINSKO NASTAVLJIVO PRIKLJUČILO Z OBROČEM BNA 68x42 10 PRITRDILNIH TOČK HIDRAVLIČNA PODPORA Z ROČNO ČRPALKO PNEVMATSKI ZAVORNI SISTEM Z ABS RAZŠIRJALNIKI REZERVNO KOLO OMARICA ... Iiodpfex E Uutex Ab Ujk

Stanje: rabljeno, največja dovoljena obremenitev: 2.825 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, prva registracija: 03/2008, dolžina tovornega prostora: 3.490 mm, širina tovornega prostora: 1.710 mm, višina nakladalnega prostora: 390 mm, prostornina tovornega prostora: 2 m³, skupna širina: 2.200 mm, skupna višina: 2.430 mm, Excavator trailer, machinery trailer with aluminium trough, 4 lashing eyes per side, aluminium ramps approx. 1950x430 mm, galvanised chassis, AL-KO axle(s), overrun brake, handbrake, jockey wheel, vehicle may be covered with advertising stickers and/or lettering. Iedpfxewm T D Ne Ab Ueik Our offer generally does not include a new MOT. If a new MOT is required, we will be happy to offer you this service via our partner workshops! Vehicle may be covered with advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply. We are also happy to provide you with a finance or leasing offer for this unit. Please contact us!

Stanje: novo, največja dovoljena obremenitev: 10.980 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ - TA -R 14.4 ----Brakes: * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7-ton Gigant axles ----Suspension: * Parabolic springs with equalizer unit ----Drawbar / Flange Eye: * Drawbar adjustable in height by 300 mm – drawbar extension by 250 mm to 2,250 mm * 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring system with indicator option in the truck via EBS signal (no installation required on the truck side) * 15-pin power socket * LED tail lights 12 / 24 V * Removable LED beacon at rear ----General Attachments: * Support winch at front * Externally mounted, hot-dip galvanized foldable support legs at rear * Plastic toolbox approx. 858 x 500 x 500 mm mounted externally at the front right on the headboard * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * Preparation in front of the headboard for retrofitting container locks * Bolted flat steel headboard * Fold-down, trapezoidal-profiled steel side walls with dropside spring assist * Retractable steel rear wall between the ramps – storage holder when not in use in front of the headboard * Bolted rear stanchions * Rear ramp approach angle approx. 860 mm ----Flooring: * 50 mm softwood floor * 12 mm thick, 270 mm wide rubber strips on the inside of the loading ramps * 12 mm thick, 210 mm wide rubber strips in the ramp approach and on the outside of the low-loader platform (running from headboard to rear beam) ----Load Securing: * Perforated outer frame, bent approx. 45°, with 2-ton lashing capacity every 480 mm * Preparation for installation of 3-ton folding lashing shackles every 600 mm * One 6.3-ton lashing ring each in the corners at front and rear * Various holes in headboard and rear beam for additional 1.2-ton lashing options ----Ramps: * One-piece mechanical gratings ramps with spring mechanism for single-person operation, approx. 2,750 x 870 mm (can be pushed together to 20 mm) ----Paintwork: Iisdpjx Ipbajfx Ab Uek * Chassis, drawbar, headboard, tailgate, and loading ramps hot-dip galvanized * Axles, springs, air tanks, and flange towing eye painted black * Side walls painted RAL 9010 pure white ----Information: * Reinforced and certified superstructure to EN 12642 XL including load securing certificate * Errors and prior sale excepted * New vehicle with manufacturer’s warranty * Sample images shown (actual vehicle images may vary due to optional equipment) ----Delivery time: Vehicle available from week 10/2026

Stanje: novo, lastna masa: 3.320 kg, največja dovoljena obremenitev: 11.900 kg, konfiguracija osi: 2 osi, skupna dolžina: 6.100 mm, skupna širina: 2.500 mm, vzmetenje: jeklo, nosilnost: 8.580 kg, Oprema: ABS, UPORABNE DIMENZIJE PLATOJA: š. 2500 x d. 6100 mm GRAVITACIJSKO NAGIBNI PLATO S POČASOVALNIM VALJEM Iisdpfxex E R T Es Ab Ujk POVRŠINA PLATOJA KOMBINACIJA JEKLA / LESA REZERVNO KOLO ZADNJE RAMPE S POMOČJO VZMETI VIŠINSKO NASTAVLJIVA VLEČNA KLJUKA Z BNA OBROČEM 68x42 8 PRITRDILNIH TOČK HIDRAVLIČNA PODPORA Z ROČNO ČRPALKO PNEVMATIČNI ZAVORNÍ SISTEM Z ABS SHRANJEVALNI PREDAL ...

Stanje: novo, največja dovoljena obremenitev: 10.980 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ - TA -R 14.4 ----Brakes: * EBS brake system * Emergency release device for spring-actuated cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalization unit ----Drawbar / Flange Eye: * Height-adjustable drawbar, adjustable by 300 mm – drawbar extension by 250 mm to a total length of 2,250 mm * 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) * 15-pin power connector * LED tail lights 12 / 24 V * Removable LED beacon at the rear ----General Equipment: * Landing gear at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low-bed Platform: * Device for subsequent installation of container locks in front of the bulkhead * Bolted smooth sheet steel bulkhead * Side walls made of trapezoidal-profiled steel, foldable with drop side spring assist * Steel rear wall, retractable between the ramps – with holder for storage inside at the bulkhead when not in use * Screw-fastened rear stanchions * Rear approach ramp approx. 860 mm ----Flooring: * 50 mm softwood floor * 12 mm thick, 270 mm wide rubber strips on the inner side of the ramps * 12 mm thick, 210 mm wide rubber strips in the approach ramp as well as on the outside of the low-bed platform (from bulkhead to end crossmember) ----Load Securing: Iedpfx Ajx Ipapjb Ueik * Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various boreholes for 1.2 t lashing points in bulkhead and end beam ----Ramps: * One-piece mechanical grating loading ramps with spring mechanism for single-person operation, approx. 2,750 x 870 mm (can be collapsed to 20 mm) ----Painting: * Chassis, drawbar, bulkhead, tailgate, and loading ramps hot-dip galvanized * Axles, springs, air tanks, and flange towing eye painted in black shade * Side walls painted RAL 9010 pure white ----Information: * --Reinforced and certified body according to EN 12642 XL, incl. load securing certificate-- * Errors and prior sale excepted * New vehicle with manufacturer's warranty * Sample images (Vehicle images may differ due to optional equipment) ----Delivery Time: Vehicle available from week 10/2026

Stanje: novo, lastna masa: 7.160 kg, največja dovoljena obremenitev: 31.900 kg, konfiguracija osi: 3 osi, vzmetenje: jeklo, nosilnost: 24.740 kg, Oprema: ABS, NAGIBNA PLATFORMA Z ELEKTROPUMPO 24V HIDRAVLIČNE RAMPE MEŠANA POVRŠINA PLATFORMA: PLOČEVINA, LETVICE IN LES UPORABNE DIMENZIJE: 2550mm x 7500mm VIŠINSKO NASTAVLJIVO PRIKLJUČILO Z OBROČEM BNA 68x42 Iodpfx Asx E R N Tjb Ueik 10 PRITRDILNIH TOČK HIDRAVLIČNA PODPORA Z ROČNO ČRPALKO PNEVMATSKI ZAVORNI SISTEM Z ABS RAZŠIRJALNIKI REZERVNO KOLO OMARICA ...

Stanje: novo, največja dovoljena obremenitev: 20.200 kg, skupna masa: 27.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TR 27.0 Flatbed: * EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 9 t BPW Eco-axles * Air suspension with lift/lower system and RTR function * 1st axle liftable * Rear axle as trailing steering axle with electro-pneumatic steering lock via PIN in reverse gear (locking of the trailing axle from the towing vehicle for maneuvering purposes – no installation required on truck side – assigned to PIN 10 in the 15-pin connector, only for maneuvering, not for use on public roads) * SmartBoard operating box as infotool with pressure sensors for total axle load display * Tire pressure monitoring with display option in the truck via EBS signal, no installation required on truck side * Fixed central drawbar with 50 mm flange eye (loaded 900 mm, height adjustment at the head plate) * Mechanical landing leg at the front, mechanical swivel supports at the rear on the chassis * Mechanically adjustable warning board package front and rear * Toolboxes made of galvanized sheet steel – black powder-coated – approx. 650 x 300 x 600 mm mounted on right-hand side * Hydraulic flow divider * Continuous side walls (without center stake) up to the drive-on slope * Folding rear posts * Steel rear wall inserted in front of the rear posts * 15-pin electrical plug * LED tail lights * Removable LED beacon including bracket and installation * 2 x LED reversing lights at vehicle rear (activated by reverse gear) * Flashing LED side marker lights * 60 mm larch/douglas fir timber floor * 400 mm steel front wall slotted in place Iedpfxor Dpz Ao Ab Usik * Perforated outer frame approx. 45° angled, with provision for mounting 3 t folding lashing rings * 1 x 10 t lashing ring at each corner, plus 2 x 10 t and 3 x 6.3 t lashing rings per side * Various holes in the front and rear crossmembers for 1.2 t lashing capability * Hydraulic one-piece loading ramps approx. 3,000 x 720 mm, mechanically adjustable laterally * Four-way hydraulic control valve for potential retrofit of hydraulic ramp shifting * Chassis, drawbar, front wall, rear mechanical props, loading ramps, and tailgate hot-dip galvanized * Axles, air tanks, flange eye, and front landing leg painted in black * Hydraulic flow divider in trailer (for hydraulic pump output in truck from over 40 l/min to 120 l/min) * New vehicle with manufacturer’s warranty * Errors and prior sale reserved * Available from week 13/2026 * Sample pictures (photos of the vehicle may differ due to special equipment)

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profile 30.0: * EBS braking system * RDÜ tire pressure monitoring * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles Iisdpfex Ipavex Ab Ujk * Parabolic springs * Mechanical axle equalization at the rear * Lateral underrun protection * Rear swing-down supports on the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle closed plastic fenders and rear axle straight galvanized steel skirts, each with spray protection * Reflective contour tape on sides and rear * Foldable cover (hot-dip galvanized) for the toolbox on the turntable platform * Multi-voltage system * LED rear lights * Removable rotating beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin power connector * Four side stake pockets each side (stakes not included), can also be used for lashing * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs of UVV swivel and retractable lashing rings, loadable in all directions, recessed into the outer frame – in the corners 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for an overall width of 3 meters (not in the rear slope area) * Widening planks stored in the center of the loading area * Excavator arm rest over rear axle up to the end beam approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm rest) * Mechanical one-piece loading ramps with spring mechanism (approx. 3,000 x 720 mm) * Mechanically adjustable lateral ramp movement * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm approach slope) * Chassis, turntable, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks etc. painted black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * -- total technical permissible weight of 30,000 kg possible -- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from calendar week 12/2026 * Sample photo

Stanje: novo, največja dovoljena obremenitev: 16.750 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 21.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release system for spring brake cylinders * Drum brakes * 2 x 11-ton Gigant axles * Air suspension with lifting and lowering device * Front bulkhead and rear slope: prepared for retrofit installation of container locks for transporting 20" containers * Drawbar with 50 mm flange eye and height-adjustable drawbar * Jost landing leg at front * External foldable supports at rear * Plastic toolbox approx. 750 x 350 x 300 mm, located right side * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * LED lights * 21-ton GVW design with reinforced frame and axles * Reinforcement package for drill rig transport on chassis * 50 mm softwood floor, clamped design * Front bulkhead prepared for retrofit installation of container locks * Bolted bulkhead made of smooth sheet metal * Split side walls made of trapezoidal-profiled steel sheet, foldable with center drop stake * Steel rear wall can be inserted between the ramps; holder for non-use on the inside front bulkhead Iijdpfeq Dyu Uex Ab Ujk * Bolted rear posts * Perforated outer frame, approx. 45 degree angled, with 2-ton lashing capacity every 480 mm * Possible installation of 3-ton folding lashing rings every 600 mm * In the corners front and rear, each with 1 x 10-ton lashing ring * Load securing package: 2 x 8-ton retractable lashing rings per side in the outer frame; various holes in the front and rear crossmembers for 1.2-ton lashing options * One-piece mechanical grating loading ramps with spring mechanism for single-person operation, approx. 3,000 x 620 mm (can be collapsed to 20 mm) * Rear approach angle approx. 860 mm chassis * Drawbar, front bulkhead, tailgate, folding supports, and loading ramps hot-dip galvanized * Axles, springs, air tanks, and landing leg painted black * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm * Wheelbase: 1,810 mm * Tires: 235/75R17.5 * Side wall painted in RAL 9010 pure white * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from week 15 / 2026

Stanje: novo, največja dovoljena obremenitev: 13.600 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2026, * KA-TA-RT 18.0: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * Air suspension with lifting and lowering system, including RtR valve and manual lowering for loading operations * Drawbar with positive-locking height adjustment and 50 mm flange tow eye * Landing gear at the front * Outward-folding support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * Plastic quarter mudguards Iiedpfxsvin T Sj Ab Usk * 15-pin 24 V connector * LED tail lights 12/24 V integrated in underride guard * Steel platform - Three-way tipper body made of fine-grained steel with high M-Strong drop sides and reinforced 180 bar tipping cylinder * Fixed front wall made of smooth sheet metal * Hardwood pad for excavator bucket, bolted onto the front wall * Continuous side walls - foldable without centre stanchion, with drop-side spring assists and pendulum function via manual central locking * Rear posts bolted * Combination steel swing doors at the rear, asymmetrically split 2-leaf, swivelling up to 270° and lockable, not fold-down, with additional pendulum frame for automatic tailgate opening during tipping process; locking via galvanised rotary bolt lock and central locking; deactivation function for automatic tailgate opening when tipping backwards with open swing doors * Each corner with 1 x 7 t lashing point, and 4 x 3 t lashing rings per side integrated into the outer frame * 4 mm steel floor plate * Two-step access on left front * Mounting rail at the rear for approach ramps * Rear compartment for approach ramps integrated into the chassis * 1 pair of aluminium approach ramps (10 t per pair) approx. 3,570 x 410 mm, suitable for rubber-tyred and tracked vehicles * --Load securing certificate according to EN 12642 XL? * Chassis, drawbar, rear posts, front wall, tipping bed, underrun protection, rear folding supports hot-dip galvanised * Side walls KTL-coated, tailgate painted in RAL 9010 pure white * Painting of side walls in any RAL colour available at extra charge * Axles, air tanks, flange tow eye, front landing gear painted black * Subject to errors and prior sale * Available from calendar week 15 / 2026 * Sample images (vehicle images may vary due to special equipment)

Stanje: novo, največja dovoljena obremenitev: 8.870 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 11.9: * Loading platform: 6.27 m * Suitable for container transport * RDÜ tyre pressure monitoring system * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes, 2 x 5.5 t BPW axles * Parabolic suspension with compensating aggregate * Drawbar height adjustable by 300 mm * Jost support winch at front * Externally mounted hot-dip galvanized folding supports at rear Iijdpjq Ra D Nefx Ab Usk * Plastic quarter mudguards * LED lighting * Hot-dip galvanized chassis, drawbar, front wall, rear wall, rear stanchions and loading ramps * 50mm softwood floor * Pre-installed fixture in front of the bulkhead for retrofitting container locks * Bolted front wall in smooth sheet metal * Folding steel side walls in trapezoidal profile with drop-side spring assist * Steel rear wall, retractable between ramp brackets when not in use, stored internally in front of the bulkhead * Bolted rear stanchions * Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm * Option for installing 3 t folding lashing brackets every 600 mm * Each front and rear corner equipped with 1 x 6.3 t lashing ring * Various holes in the front and end carrier for 1.2 t lashing options * One-piece mechanical loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be pushed together to 20 mm) * Rear entry angle approx. 860 mm * Wheelbase: 990 mm * Tyres: 235/75R17.5 * Side panels painted in RAL 9010 pure white * Side walls can be painted in any RAL colour for an additional charge * Plastic toolbox * Errors and prior sale excepted * Available from calendar week 09 / 2026

Stanje: novo, največja dovoljena obremenitev: 8.870 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 11.9: * Loading area 6.27 m * Suitable for container transport * RDÜ tyre pressure monitoring * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes, 2 x 5.5 t BPW axles * Parabolic springs with compensation unit * Height-adjustable drawbar by up to 300 mm * Jost landing gear at the front Iiodsrvvfwjpfx Ab Usk * Externally mounted hot-dip galvanised folding supports at the rear * Plastic quarter mudguards * LED lighting * Hot-dip galvanised chassis, drawbar, front wall, rear wall, rear stanchions and drive-on ramps * 50 mm softwood floor * Fixture in front of the front wall for retrofitting container locks * Bolted smooth sheet metal front wall * Trapezoidal-profiled steel sheet side walls, fold-down, with sideboard spring assistance * Steel rear wall can be slid in between the ramp holders and stored in front of the front wall when not in use * Bolted rear stanchions * Perforated external frame, bent approx. 45 degrees, with 2 t lashing capacity every 480 mm * Installation of 3 t drop-down lashing rings every 600 mm possible * In the corners, front and rear, 1 x 6.3 t lashing point each * Various holes in the front and end cross member for 1.2 t lashing options * One-piece mechanical drive-on ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (can be collapsed down to 20 mm) * Rear approach angle approx. 860 mm * Wheelbase: 990 mm * Tyres: 235/75R17.5 * Sideboard coating in RAL 9010 pure white * Sidewall coating available in any RAL colour at extra charge * Plastic toolbox * Errors and prior sale excepted * Available from calendar week

Stanje: novo, največja dovoljena obremenitev: 14.550 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2024, * ETÜ-TA-R 19.0: * Wabco EBS-E (electronic braking system) * TPMS (tire pressure monitoring system) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 11 ton Gigant axles * Air suspension * Drawbar with 50 mm flange towing eye and height-adjustable drawbar * Jost landing gear at the front * External folding supports at the rear * Toolbox made of galvanized sheet steel, approx. 650 x 350 x 320 mm, mounted on the right side (powder-coated black) * Lateral underrun protection * Plastic quarter mudguards * 15-pin electrical connector * LED tail lights * Reinforcement package for drilling rig transport at the chassis – loading height + 20 mm * 50 mm softwood floor, clamped version * Pre-fitted device in front of the bulkhead for subsequent installation of container locks * Bolted bulkhead made of smooth sheet metal * Drop-side walls made of trapezoidal-profiled steel, foldable with drop-side spring-assisted lifting device * Steel rear wall, can be slid in between the ramps – mounting bracket for storage in front of the bulkhead when not in use * Bolted rear stanchions * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option for installation of 3 t folding lashing rings every 600 mm * In each front and rear corner: 1 x 10 t lashing ring; various holes in front and rear cross members for 1.2 t lashing options * One-piece mechanical grating-type ramps with spring mechanism for one-man operation, approx. 2,750 x 620 mm (can be slid together up to 20 mm) * Rear approach angle approx. 860 mm * Chassis, drawbar, bulkhead, tailgate, rear folding supports, and ramps hot-dip galvanized * Axles, springs, air reservoirs, and landing gear painted in a shade of black * Wheelbase: 1,310 mm * Tyres: 235/75R17.5 * Drop-side panels painted in RAL 9010 pure white * Side panels can be painted in a RAL colour of your choice at extra cost * New vehicle with manufacturer’s warranty * Subject to errors and prior sale Iedpfxepk D Nco Ab Uoik * Immediately available from Egestorf