Drugo Nizki Nakladalnik nakup rabljenega (152)

Stanje: novo, številka stroja/vozila: a3b1347da4aa7f31dceb875db, lastna masa: 2 kg, največja dovoljena obremenitev: 9 kg, skupna masa: 11 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Central Axle Trailer Fine-grained steel welded construction 6 pairs of lashing eyes bolted to the outer floor/frame, each rated at 5 tons Gear support leg at the front Foldable rear support 2 wheel chocks with holder Steel underrun protection Full-width rear mudflap Quarter-shell fenders Central axle trailer coupling equipment Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 300 mm Axles & Suspension BPW drum brake axles Axles/chassis laser-measured for reduced tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical equalization (rocker compensation) Wheels and Tires 235 / 75 R 17.5 Manufacturer's choice Factory silver steel rims Braking System Dual-line air brake system Hand spindle parking brake Integral air reservoir 2 interchange-proof coupling heads at the front with connecting pipes to the towing vehicle Hjdpfoi Ri Iljx Af Aji ABS and ALB, ABS plug at the front, with connecting cable Note: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! Electrics 24 Volt, multi-chamber lights, yellow LED side markers 2 white front position lights 2 white/red rear marker lights 2 x 7-pin interchange-proof plugs at the front, with connecting cable Floor Steel/chequer plate floor for high point load capacity Note: Slight floor waviness possible due to welding distortion! Platform length approx. 5,200 mm Rear tapering approx. 900 mm Front wall / corner posts 25 mm aluminum hollow profile, 320 mm high Side walls 25 mm aluminum hollow profile, 320 mm high, foldable and removable Rear wall / corner posts 1 pair of steel stanchions fixed to the frame and with holders for securing the loading ramps, entry width approx. 2,430 mm Loading ramps 2 steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable, with hand grip on the ramps wooden inlay with gas strut for one-person operation Operating Instructions The specified gross weight is technically possible; depending on the load, the gross weight may not be achievable within the permitted axle/support/coupling loads. (Poor driving and tracking may result from incorrect load distribution) Country of Registration / Plates Country of registration: Germany With Dekra approval and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paintwork Frame DB 7350 Novagrau, 10-year warranty against rust-through Front wall aluminum Side wall anodized aluminum Loading ramps hot-dip galvanized Note: Archive images!

Stanje: novo, številka stroja/vozila: 628cde0fe99cc2d3c8eaa8dd8, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-Loader Trailer Steel welded construction Turntable with robust ball bearing slewing ring Foldable rear support 2 wheel chocks with holder Side underrun protection made of aluminium Hjdpfx Aoi Ri Ddef Aei Full-width rear spray flap Half-shell mudguards on 1st axle with anti-spray flaps, anti-spray flaps behind 2nd and 3rd axle 1 plastic toolbox with shelf, dimensions: width=620 mm / height=360 mm / depth=440 mm, lockable with padlock (padlock not included) Extendable width up to 3,000 mm Storage compartment for wooden planks in the centre of the loading area 70 mm wooden planks for extension to 3,000 mm Tie-down lugs for low loader (40 lashing points) 1 pair of lashing cut-outs in the longitudinal beam at the front, recessed into the gooseneck, each rated at 10 t 4 pairs of lashing holes in the outer frame, each rated at 5 t (for securing with lashing straps) 7 pairs of lashing mushrooms, recessed at the top and side of the outer frame, each rated at 10 t 1 at the front on the gooseneck 6 in the low bed First lashing point 250 mm from the front, last max. 250 mm from the rear, spacing between lashing points not greater than 1,100 mm 5 pairs of stake pockets recessed in the outer frame, interior dimensions 70 x 40 mm (convertible to 5 t ring lashing points, not included) 2 additional pairs of folding lashing rings, each rated at 10 t 1 on the gooseneck (protruding) 1 behind the last axle, recessed in the floor Towing Device Turntable Trailer Drawbar with certified 40 mm towing eye Axles and Suspension Drum brake axles, manufacturer’s choice Axle/chassis laser alignment to reduce tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalisation (rocker equalisation) Wheels and Tyres 235 / 75 R 17.5 Manufacturer’s choice Steel rims, twin arrangement, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front with connecting lines to the tractor unit ABS and ALB, with ABS socket at the front and connecting cable Manufacturer: Wabco or Knorr Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane lights at the rear 2 x 7-pin non-interchangeable plugs at the front with connecting cable 1 LED beacon with bracket, switched with parking lights (removable beacon) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Gooseneck at the front with steel/chequer plate covering Toolbox recessed into transition slope to gooseneck Following area with 70 mm softwood floor, steel/chequer plate in wheel arch area Rear taper with 70 mm softwood floor Low-loader deck including rear taper: 6,500 mm Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Timber surfaced With spring lift assistance Country of Registration / License Plates Country of registration: Germany 24/7-Service Hotline Prepared for two-line license plate holder Contour marking with reflective strips according to ECE R 048, white on sides, red at rear Warning sign according to ECE-70 Painting Frame hot-dip galvanized including passivation 15 years’ warranty against corrosion perforation Drawbar galvanized or black, manufacturer’s choice Loading ramps hot-dip galvanized Attention! Archive images shown!

Stanje: novo, številka stroja/vozila: 55d3c5c03e032385649769b1b, lastna masa: 9.900 kg, največja dovoljena obremenitev: 14.100 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-Loader Trailer Steel welded construction Turntable with heavy-duty slewing ring, integrated storage box incl. Turntable front structure Foldable rear support 2 wheel chocks with holders Aluminum side underrun protection Full-width rear mud flaps Extendable widenings to 3,000 mm (not at rear taper) (track width of the machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Central compartment on loading area for timber planks 70 mm timber planks for widening to 3,000 mm Lashing points Low-loader 3 pairs of integrated lashing points, each rated to 10 t, at the front floor 6 pairs of mushroom lashing points, top and side integrated in outer frame, each 10 t 1 x at neck area remaining points distributed, distance no greater than 1,200 mm 1 x at rear taper 5 pairs of stake pockets integrated in the outer frame, internal size 70 x 40 mm (convertible to 5 t ring lashing eyes, not included) Drawbar assembly for trailer turntable Drawbar with certified 40 mm towing eye Note: For 40 mm towing eye, the maximum permissible gross weight of the towing vehicle is 18,000 kg. Otherwise, a 50 mm towing eye is required. Axles + Suspension SAF drum brake axles Laser-aligned axles/chassis to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization front and rear (rocker compensation) Wheels and Tires 235 / 75 R 17.5 manufacturer's choice Steel twin wheels, factory silver Brake system 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, with connection lines to the truck ABS and ALB, with ABS connector at front, connection cable included Attention: The trailer may only be towed by vehicles that ensure ABS functionality! Electrics 24-volt multi-chamber lights, side yellow LED lighting 2 white front position lights 2 white/red rear lane marker lights 2 x 7-pin non-interchangeable connectors at the front, with connection cable 1 LED beacon with bracket, operated via parking lights (removable beacon) 2 pairs of warning boards, double LED-lit and extendable to 3,000 mm Floor Steel floor at front section thereafter 70 mm softwood floor, in wheel arch area with steel/chequer plate covering Rear taper with 70 mm softwood floor Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable wooden inlays spring-assisted lifting Operating instructions Exception permit required for 10,000 kg axle load, only indivisible loads allowed!!! The specified total weight is technically possible. Depending on the cargo, the full gross weight may not be achieved while observing permissible axle/pin/support loads (poor tracking and handling may result from incorrect load distribution) Country of Registration / Plates Registration country: Germany 1 with Dekra inspection and report (according to §13 EC-FGV) 24/7 service hotline prepared for 2-line license plate holder Conspicuity markings with reflective strips acc. ECE R 048, white on the sides, red at the rear Paint Hjdpfsi Ri I Ejx Af Aei Frame RAL 3002 Carmine Red 10 years warranty against rust-through Drawbar galvanized or black, at manufacturer's discretion Loading ramps hot-dip galvanized Attention: Archive photos!

Stanje: novo, številka stroja/vozila: 6d88bda3a1ee2464a81b34f36, lastna masa: 4 kg, največja dovoljena obremenitev: 13 kg, skupna masa: 18 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low Loader Trailer Steel welded construction with a slight central camber, turntable with heavy-duty ball bearing slewing ring, chocks with holders, quarter shell mudguards in front of and behind each axle. Lashing Points Low Loader Over front axle: 2 pairs of ring lashing eyes (each 5 t) at the front on the cranked section Low-bed: 4 pairs of lashing eyes (each 6 t) at the sides of the lowbed 5 pairs of lashing eyes (each 5 t) between the longitudinal beams Drawbar Assembly Turntable Trailer Drawbar with certified 40 mm towing eye, mechanically adjustable in length by 6 x 100 mm increments and lockable (Drawbar length 1,700 – 2,300 mm) Axles + Suspension BPW drum brake axles with 10 t axle load each, slack adjusters. Continuous axle brake test up to 105 km/h. Rear axle can be removed manually. To do so, release air locking mechanism, lower the rear section to the ground, disconnect hydraulic hoses from rear section, insert the transport bar into a rear socket, and by gently pushing down and simultaneously pulling backwards, release rear section (parking brake released). After loading/unloading, move rear section into position and hook up to mark. Then raise rear section to driving height and connect hydraulic hoses. Confirm bolt locking (visual inspection if bolt snaps in) and check rear function. Air suspension with lift & lower valve. Hedpfji Ri N Aox Af Aji Wheels and Tires 235/75 R 17.5, from leading manufacturers, steel rims in twin arrangement, factory silver. Braking System 2-line compressed air brake system, spring-loaded parking brake, 2 fool-proof coupling heads at front with connection lines to tractor, EBS, electronic brake system with EBS plug at front with connection cable. Attention: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! Electrics 24 volt, multi-chamber lights, yellow LED side marker lights, 2 white position lights front, 2 white/red lane control lights rear, revolving beacon with bracket, powered via parking light (removable), 2 pairs of warning boards double LED illuminated and extendable up to 3,300 mm, removable with plug, 2 x 7-pin fool-proof plugs at front with connecting cable, 1 x 7-pin agricultural plug, voltage converter 12/24 volt (for electrics only, not for ABS/EBS) Floor Steel/aluminum checker plate floor on cranked section, between longitudinal and cross beams with perforated cover plates. Axle cover not drive-over, widening to 3,000 or 3,300 mm possible. Operating Instructions Note! For 10,000 kg axle load, a special permit is required. Permit must be applied for separately in each federal state; the legislator is not obliged to grant approval for 20 t GVW. Customer’s risk. Special permit required if total train length exceeds 18,750 mm. Observe country-specific registration regulations. The stated gross weight is technically possible; depending on the cargo, the gross weight may not be achievable in compliance with permissible axle, support, and fifth wheel loads. Observe BO-circle!!! Registration / License Plates Registration country: Germany, with Dekra inspection and report (per §13 EC-FGV), prepared for single-line license plate holder, ECE-70-compliant warning board, contour marking with reflective strips per ECE R 048 Paintwork Front frame hot-dip galvanized incl. passivation, rear frame RAL9006 silver, drawbar KTL black Attention: Archive images!

Stanje: rabljeno, številka stroja/vozila: 816b3dfbfa1c7d49b7d052bd6, lastna masa: 2.500 kg, največja dovoljena obremenitev: 8.000 kg, skupna masa: 10.500 kg, konfiguracija osi: 2 osi, prva registracija: 07/2022, velikost pnevmatike: 235/75 r17,5, Leto izdelave: 2022, Further information Chassis: Central axle trailer, low-bed Fine-grained steel welded construction, gearbox support foot at the front, telescopic rear support, wheel chocks with holder, steel fenders over both wheels Coupling system: Central axle trailer Drawbar with certified 40 mm towing eye, height-adjustable by spindle, max. adjustment range 250 mm Axles & Suspension Euro axles of our choice, with tapered roller bearings and S-cam brake, axles/chassis laser-aligned to reduce tire wear and fuel consumption, parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalization (rocker balance) Brake system 2-line compressed air brake system, spring-actuated parking brake, 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS connector at the front, with connecting cable Note: The trailer may only be towed by vehicles which ensure the effectiveness of the ABS! Electrics 24 volt, multi-chamber tail lights, yellow LED side marker lights, 2 white position lights at the front, 2 white/red lane marker lights at the rear, 1 x 15-pin plug at the front, with connection cable. Deck TTS Low-mounted steel trough, deck floor made from steel/chequer plate, steel sidewalls solidly welded to the floor, deck length 5,500 mm, trough with Load-Lock profile at the front and sides for lashing strap attachment (8 pieces at the front, 16 pieces on each side) Note: Slight floor warping may occur due to welding distortion! Pair of lashing rings: 1 x at each front corner of the steel trough and 1 x at the rear in the floor, each rated at 5 tons. Additional pair of lashing rings in the floor, each rated at 5 tons. Drive-on ramps Steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable, with grip handles on the ramps, wood-clad, with gas struts for single-operator handling Operating notes Hodpfxeqmc Rae Af Aoi The specified gross weight is technically possible; depending on the load, the gross weight may not be achievable while adhering to the permissible axle, support and saddle loads. (Poor driving and tracking behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany, with Dekra inspection and certificate (according to §13 EG - FGV), prepared for single-line licence plate holder, contour marking with reflective strips in accordance with ECE R 048, white on the sides and red at the rear.

Stanje: novo, številka stroja/vozila: f8fb99947a1c19bc4d63549ff, lastna masa: 6 kg, največja dovoljena obremenitev: 17 kg, skupna masa: 24 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-bed Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Rear foldable support 2 wheel chocks with holders Side underrun protection in aluminium Full-width rear mudflap Half-shell mudguards on the 1st axle with anti-spray mudflaps; anti-spray mudflaps behind 2nd and 3rd axles 1 plastic toolbox with shelf, dimensions: width 620 mm, height 360 mm, depth 440 mm, lockable with padlock (padlock not included) Extendable width up to 3,000 mm (not at rear slope) (track width of machines or vehicles to be transported must not exceed external frame width of 2,550 mm) Central storage compartment for timber planks on the loading platform 70 mm timber planks for widening to 3,000 mm Tie-down eyes for low-loader: 1 pair of flush-mounted ring lashing eyes at the front on the swan neck, each rated at 5t 7 pairs of lashing mushroom pins, recessed on top and sides of outer frame, each rated at 10t 1x front on swan neck 6x in low bed area First lashing eye 250 mm from the front and last max. 250 mm from the rear, distance between lashing eyes not more than 1,100 mm 5 pairs of stake pockets recessed in the outer frame, internal dimensions 70 x 40 mm (convertible to 5t ring lashing eyes, not included) 2 additional pairs of foldable lashing eyes, each rated at 10t Hodpfxji Riwfj Af Aji 1x on swan neck (protruding) 1x behind the last axle, recessed in the floor Drawbar assembly for turntable trailer: Drawbar with certified 40 mm towing eye Axles & Suspension SAF drum brake axles Axle/chassis laser alignment to reduce tyre wear and fuel consumption Parabolic springs with maintenance-free steel-rubber bushings and mechanical axle load equalisation (rocker compensation) Wheels and Tyres 235/75 R 17.5 Manufacturer's choice, with M&S marking Steel rims in twin arrangement, factory silver finish Braking System 2-line compressed air braking system Spring-actuated parking brake 2 foolproof coupling heads at the front, with connecting lines to the towing vehicle ABS and ALB, with ABS socket at the front and connecting cable Brand: Wabco or Knorr Note: The trailer may only be towed by vehicles that ensure the proper functioning of the ABS! Electrics 24 Volt, multi-chamber lights, yellow LED side marker lights 2 white position lights at the front 2 white/red lane departure lights at the rear 2x 7-pin foolproof plugs at the front with connecting cable 1 LED beacon with bracket, switched via parking lights (lamp removable) 2 pairs of warning boards, double LED illuminated and extendable to 3,000 mm Floor Front swan neck with steel chequer plate covering Storage box recessed in the approach slope to the swan neck Then 70 mm softwood flooring, in wheel arch area with steel chequer plate Rear slope with 70 mm softwood flooring Low-bed area incl. rear slope 6,500 mm Loading Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Additional ramp safety device, foldable at the bottom (prevents lateral displacement of ramps, not in combination with laterally hydraulic ramp adjustment) Wooden covering Spring-assisted lifting support Operating Instructions At 10,000 kg axle load, a special permit is required, only indivisible loads allowed! The specified total weight is technically possible, but depending on the cargo, the total weight may not be achievable while complying with the permissible axle, support, and king pin loads (poor handling or tracking may result from incorrect load distribution) Country of Registration / Pla

Stanje: novo, številka stroja/vozila: f79a9f15e7131d57a512793ab, lastna masa: 8.900 kg, največja dovoljena obremenitev: 15.100 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-bed Trailer Steel welded construction Turntable with heavy-duty ball race Foldable rear supports 2 wheel chocks with holders Side underrun protection, aluminium Rear spray guards across the full width Quarter fender before 1st axle Extendable outriggers up to 3,000 mm (not in the rear slope area) (Note: The track width of the construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Central storage compartment for timber planks on the loading area 70 mm timber planks for extension to 3,000 mm Lashing points Low-bed 1 pair of lashing rings on gooseneck, each rated at 5 t 9 pairs of lashing mushrooms, flush-mounted on the top and side in the outer frame, each rated at 10 t 2 x front on gooseneck 7 x in the low-bed 6 pairs of lashing holes in the outer frame of the low-bed, each rated at 5 t (for attaching tie-down straps) Drawbar System Turntable trailer Drawbar with certified 50 mm towing eye Axles & Suspension SAF drum brake axles Laser-aligned axles/chassis to reduce tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber mount and mechanical axle load compensation (rocker balance) front and rear Wheels and Tyres 235/75 R 17.5 Manufacturer's choice Steel rims, twin arrangement, factory silver Brake System 2-line air brake system Spring-loaded parking brake 2 swap-proof coupling heads at the front with connection lines to towing vehicle ABS and ALS, with ABS connector at the front and connection cable Attention: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! Electrics 24 Volt, multi-chamber lights, side amber LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear Hjdpoi Ri Izefx Af Aoi 1 LED beacon with holder, switchable by parking light (removable) 2 pairs of warning boards, double LED illuminated and extendable up to 3,000 mm 2 x 7-pin swap-proof plugs at the front, with connecting cable Floor Gooseneck at front with steel/chequer plate covering Thereafter 70 mm softwood floor, wheel arch area with steel/chequer plate covering Rear slope with 70 mm softwood floor Access Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Wood plated Hydraulic activation via auxiliary drive on tractor unit with throttle, operation on front left side Hydraulic connection with SVK connector NW 10/3, including connection hose Operating Instructions A special permit is required for an axle load of 10,000 kg; only indivisible loads possible!!! The specified gross weight is technically possible; depending on the freight, the permissible gross weight may not be achieved while respecting axle, support and kingpin loads. (Poor driving and trailing behaviour possible due to incorrect load distribution) Registration Country / Plates Country of registration: Germany With Dekra inspection and report (according to §13 EC-FGV) 24/7 Service Hotline Included Prepared for double-line number plate holder Contour marking with reflective strips according to ECE R 048, white on sides, red at rear Paintwork Frame DB 7350 Nova Grey 10-year warranty against rust-through Drawbar galvanised or black, at manufacturer’s choice Access ramps hot-dip galvanised

Stanje: rabljeno, številka stroja/vozila: 0e87837859aec926e9db10456, lastna masa: 6.200 kg, največja dovoljena obremenitev: 11.800 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2018, velikost pnevmatike: 235/75 r17,5, Leto izdelave: 2017, Further Information Chassis: Steel welded construction, double cranked with low bed in front of and behind the axle assembly, low bed beveled for driving on, turntable with robust ball bearing slewing ring, foldable rear support, wheel chocks, side underrun protection, quarter shell mudguards. Lashing points: Over front axle: 2 pairs of ring lashing eyes each rated 5t at the front at the cranked part of the low bed / Rear axle: 6 pairs of lashing eyes laterally in the low bed each rated 8t. 6 pairs of lashing eyes each rated 5t between the longitudinal beams, pair of stake pockets recessed in the outer frame, inside dimension 70 x 40 mm, or alternatively to stake pockets, 5t ring lashing eyes embedded in the floor. Hedji Ri N Uopfx Af Asi Drawbar: Certified 40 mm towing eye Axles: BPW drum brake axles Brake system: 2-line compressed air braking system, spring-actuated parking brake, 2 fail-safe coupling heads at the front Electrics: 24 volts, multi-chamber lights, lateral yellow lighting, 2 white position lights at the front, 2 white/red lane marker lights at the rear, beacon with bracket, pair of illuminated warning panels extendable to 3,000 mm, 2 x 7-pin fail-safe connectors at the front Floor: Front crank with steel / chequer plate covering, stowage box recessed in the transition to the crank, track area and middle section between the beams with steel / chequer plate covering, rear slope with 70 mm softwood floor, low bed area including rear slope 5900 mm Ramps: Hanging rail for aluminum ramps across the entire width, as U-profile across the entire width. Pair of aluminum ramps 800 mm long, approx. 400 mm wide, load capacity per pair 14,000 kg, stowage compartment for ramps between beams Approval: Contour marking with reflective strips according to ECE R 048, white at sides and red at rear

Stanje: rabljeno, številka stroja/vozila: SA92856PTJT11xxxx, Leto izdelave: 2019, Prosimo, navedite referenčno številko ob povpraševanju: 21019 Specifikacije: Hjdpfx Aow S Sy Sof Aoi Letnik: 2019 Dolžina: 812 cm Širina: 255 cm Lastna teža: 4.000 kg Skupna teža: 19.000 kg 2 osi Zračne zavore Nakladalne rampe s pomočjo vzmeti Ročne podporne noge Pnevmatike (glejte slike) Parabolično vzmetenje Takoj dobavljivo Opis: McCauley nizkopodni priklopnik za stroje na prodaj. Takoj dobavljivo. TÜV: Ne EU homologacija do: 10.02.2025 Lastna teža: 4000 Model: maskinhenger = Dodatne informacije = Za več informacij se obrnite na ATS Norway.

Stanje: rabljeno, številka stroja/vozila: SKBE48S338KE1xxxx, Leto izdelave: 2010, Prosimo, navedite referenčno številko ob povpraševanju: 18968 Specifikacije: - Model 2010 - 3 osi - Pnevmatske gume (glejte slike) - Hidravlični pogonski vrat - Širina: 255 cm - Pripravljeno za dostavo Opis: Vse deluje, kot je navedel prejšnji lastnik. Pripravljeno za dostavo TÜV: Da EU homologacija do: 20.10.2026 Lastna teža: 9460 kg Skupna teža: 48000 kg Hjdpfouytt Aox Af Aei Nosilnost: 38540 kg Širina: 255 cm Dolžina: 1340 cm Model: Maskinhenger m/ Hydraulisk kjørebru = Dodatne informacije = Za več informacij se obrnite na ATS Norway.

Stanje: novo, lastna masa: 4.800 kg, največja dovoljena obremenitev: 16.200 kg, skupna masa: 21.000 kg, dolžina tovornega prostora: 6.540 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 870 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r 17,5, Leto izdelave: 2026, Oprema: ABS, Air suspension with lift/lower function SAF low-bed trailer axles Twin tyres 235/75 R 17.5 EBS electronic braking system 6 flush-mounted 10 t lashing rings in the floor 14 lashing rings (2 t) in the outer frame Gearbox support winch with load and fast gear Rear support: 2 foldable supports on the chassis frame Ramps approx. 3100 mm long and approx. 750 mm wide, laterally adjustable Decking with wooden flooring and steel chequer plate above the wheels Wooden flooring in the ramps Spring-assisted ramp lifters Aluminium side walls with central stanchions Hjdpfx Afoi Dqn Ro Asi Hot-dip galvanised steel front wall Stepless height-adjustable drawbar Coupling height approx. 800 - 1000 mm DIN drawbar eye d= 50 mm Rear loading area tapered Mudguards with antispray system Additional equipment available on request at any time Collection ex works or delivery Price per km: €2.90

Stanje: novo, lastna masa: 7.500 kg, največja dovoljena obremenitev: 32.500 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, naslednji pregled (TÜV): 03/2023, dolžina tovornega prostora: 9.700 mm, širina tovornega prostora: 3.000 mm, višina nakladalnega prostora: 900 mm, vzmetenje: zrak, velikost pnevmatike: 235/75r17,5, Leto izdelave: 2026, Oprema: ABS, osrednja vrtljiva plošča, TOP EQUIPMENT – INCLUDING THE FOLLOWING ACCESSORIES: Chassis frame hot-dip galvanized in immersion bath Front storage box on platform, with hinged lid Rear storage box on platform, with hinged lid Recess for excavator arm storage, lowbed – rear section 3 m equipment package without ramp incline Warning package for special permit Steel sheet toolbox Stake pocket set in outer frame Basic hydraulics for truck with rear connection Hydraulic ramp lift for one-piece ramps Hydraulic lateral ramp shift Hydraulic support legs left and right 1 pair of 6t lashing rings bolted to outer frame WABCO Smart Board pre-configured Complete SSV front left HTD409525K Hjdpfxoglbllj Af Aei COC certificate of conformity OPTIONAL Rubber flooring on ramp €1,890 net Rubber flooring on the incline €1,250 net Adjustable drawbar 40 / 50 DIN

Stanje: novo, lastna masa: 6.000 kg, največja dovoljena obremenitev: 24.000 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.540 mm, širina tovornega prostora: 2.550 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 r17,5, Leto izdelave: 2026, Oprema: ABS, osrednja vrtljiva plošča, 3-AXLE HUMBAUR LOW-LOADER TRAILER INCLUDES: 3 PAIRS OF 6-TON LASHING POINTS IN THE OUTER FRAME => HOT-DIP GALVANIZED CHASSIS FRAME => HOT-DIP GALVANIZED BOGIE FRAME => HOT-DIP GALVANIZED LOADING RAMPS => 10 x 10-TON LASHING POINTS => 10 x 3-TON LASHING POINTS, outer frame => 8 x 2-TON LASHING POINTS, above wheels => SPRING-ASSISTED LIFTING DEVICE FOR RAMPS => 40 mm DRAWBAR => APPROX. 2,700 MM LONG LOADING RAMPS => APPROX. 750 MM WIDE LOADING RAMPS => TWIN TIRES 235/75 R17.5 INCH => LOADED PLATFORM HEIGHT ONLY APPROX. 860 MM => COUPLING LENGTH / B-LENGTH APPROX. 10,720 MM => FRONT CORNERS BEVELLED => TWO FOLDING SUPPORT LEGS AT REAR => AND MUCH MORE => Delivery freight: 2.90 Euros plus VAT per km => Prices ex works D-86368 Gersthofen Your direct contact: Mr. Hirn Tel. DOLL FAHRZEUGBAU Hjdpfxjd U A Tgj Af Aoi *Subject to prior sale and changes!* *Price valid ex works D-86368 Gersthofen* *Sale to commercial customers only!* *Pictures may differ and serve only as an approximate reference => may show/include options subject to surcharge*

Stanje: zelo dobro (rabljeno), številka stroja/vozila: VAVGT4440DZ337204, konfiguracija osi: 3 osi, prva registracija: 03/2014, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 3.000 mm, višina nakladalnega prostora: 900 mm, skupna dolžina: 8.600 mm, skupna širina: 2.500 mm, skupna višina: 920 mm, vzmetenje: jeklo, barva: drugo, Leto izdelave: 2014, = Dodatne možnosti in oprema = - Ojačane osi - Zadnje vzmetenje: listnate vzmeti - Bobnaste zavore - Sprednje vzmetenje: listnate vzmeti - Centralno mazanje = Dodatne informacije = Konfiguracija osi Zavore: bobnaste zavore Vzmetenje: listnate vzmeti Sredinska os: največja obremenitev osi: 10.000 kg Zadnja os 1: največja obremenitev osi: 10.000 kg Zadnja os 2: največja obremenitev osi: 10.000 kg Zadnja os 3: aluminijasta platišča; največja obremenitev osi: 10.000 kg Teže Lastna masa: 8.430 kg Nosilnost: 31.570 kg Skupna dovoljena masa: 40.000 kg Funkcionalno Višina nakladalnega prostora: 90 cm Hsdpfxsygvy Ss Af Aei Vzdrževanje, zgodovina in stanje PTI (tehnični pregled): veljaven do 06.2026 Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro

Stanje: rabljeno, številka stroja/vozila: 1xxxx, Leto izdelave: 1986, Prosimo, navedite referenčno številko ob povpraševanju: 21614 Specifikacije – Prikolica za prevoz strojev: EU homologacija do: 24. 09. 2026 Letnik: 1986 Pnevmatike (glejte slike) Hedpfoxq Ddfsx Af Aji Dolžina: 1.180 cm Širina: 250 cm Medosna razdalja: 535 / 140 cm Lastna masa: 6.440 kg Največja nosilnost: 19.560 kg Opremljena z naletnimi rampami TÜV: Da EU homologacija do: 24. 09. 2026 Lastna masa: 6.440 Skupna masa: 26.000 Nosilnost: 19.560 Širina: 250 Dolžina: 1.180 Model: 1986 Goldhofer prikolica za stroje = Dodatne informacije = Za več informacij kontaktirajte ATS Norway.

Stanje: novo, lastna masa: 2.500 kg, največja dovoljena obremenitev: 9.400 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.200 mm, širina tovornega prostora: 2.460 mm, višina nakladalnega prostora: 400 mm, velikost pnevmatike: 235/75 r17,5, Oprema: ABS, dvižna zadnja plošča, spojka prikolice, HUMBAUR 11.9 t Tandem Low-Loader, Drive-Over Type with Ramp Compartment, Model HBT 106224 BE (Insertable Planks) INCLUDES anodised aluminium drop sides INCLUDES HOT-DIP GALVANISED CHASSIS / DRAWBAR Specification: * Permissible gross weight: 11,900 kg * Payload: approx. 9,400 kg * Loading area: approx. 6,200 x 2,460 mm * Unladen loading height: approx. 920 mm * Total dimensions (LxWxH): approx. 8,140 x 2,550 x 1,400 mm * Anodised aluminium drop sides, foldable and removable on the sides; galvanised corner posts, plug-in at front and rear * Lockable storage compartment for optional aluminium ramps integrated in chassis frame * Infinitely height-adjustable drawbar for coupling heights (unladen): approx. 700 - 1,000 mm * Reinforced 12 t geared support winch, dual speed (load/fast) * BPW axles * 6 recessed 6-t lashing rings * 14 retractable 2-t folding lashing shackles on outer frame * 2 telescopic folding supports at rear of vehicle * 2-circuit air brake system with ALB (automatic load-dependent braking) function * 24V ABS braking system * Spindle parking brake * Hot-dip galvanised steel mudguards * Pine softwood floorboards * Fully hot-dip galvanised chassis frame and drawbar * Tyres: 235/75 R17.5 * Maintenance-free parabolic suspension with load equalization * Electrical system: 15-pin, 24V * Brake coupling: 2 ISO 1728 color-coded couplings, red/yellow Your advantages: * High-quality, corrosion-protected anodised aluminium drop-side body * Optimum corrosion protection via full bath hot-dip galvanizing * Safe loading and unloading via telescopic folding rear supports * Simple operation thanks to patented ALU ramp safety system * Lockable ramp storage compartment * Excellent load securing options thanks to standard lashing points * Steplessly height-adjustable drawbar ensures compatibility with a wide range of towing vehicle couplings * Low deadweight = high payload capacity Hodpfjkn N R Nsx Af Aji Optional at extra charge: * 1 pair of ALU loading ramps (8 t/pair) with patented locking mechanism, approx. 3,570 mm long x 400 mm wide (approx. 55 kg per piece) *Stock vehicle – available immediately *Subject to prior sale *Ex works price

Stanje: novo, največja dovoljena obremenitev: 9.500 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.010 mm, višina nakladalnega prostora: 250 mm, velikost pnevmatike: 235/75 r17,5, Oprema: ABS, spojka prikolice, HUMBAUR 11.9 t Tandem Low-loader, Drive-through design (wheels outside), Type HS 105020 BS --- INCLUDES galvanized grating surface on the rear loading ramps --- HOT-DIP GALVANIZED CHASSIS/TOWING BAR Equipment: * Permissible total weight: 11,900 kg * Payload: approx. 9,500 kg * Loading area: approx. 5,000 x 2,010 mm * Unloaded loading height: approx. 700 mm * Overall dimensions (LxWxH): approx. 7,160 x 2,550 x 3,000 mm * Side-shifting loading ramps with galvanized grating surface (approx. 2,400 x 540 mm), each ramp with gas pressure spring assist * Infinitely height-adjustable towing bar for coupling heights (unladen) approx. 700 - 850 mm * Reinforced 12 t two-speed support winch (load and quick mode) * 4 recessed lash rings (6t each) in the corners * 12 foldable lashing brackets (2t each) mounted in the outer frame * 2 telescopic drop-down supports at the rear * 2-circuit compressed air brake system with ALB function * 24-volt ABS braking system * Spindle handbrake * Hot-dip galvanized steel fenders * Floor made from softwood planks * Chassis frame with towing bar hot-dip galvanized by full immersion * 235/75 R17.5 tires * Maintenance-free parabolic suspension with load equalization * Electrical system: 15-pin, 24 Volt * Brake connection: 2 non-interchangeable ISO 1728 coupling heads (red/yellow) Hedpfskn N S Hsx Af Aji Your advantages: * Low platform and construction height * Optimal corrosion protection thanks to full bath hot-dip galvanization * Safe loading and unloading thanks to the telescopic rear supports and anti-slip grating ramp surface * Easy and effortless handling of the steel ramps thanks to the ramp lifters * Excellent load securing options thanks to standard lashing points * The infinitely adjustable towing bar allows compatibility with varying towing vehicle coupling heights * Low tare weight = high payload capacity TOP! Upon request, we are pleased to offer a topcoat paint finish (front, side walls, fenders, rear crossmember) in your corporate color on the galvanized chassis. Sample images available. *In-stock vehicle – available immediately *Subject to prior sale *Ex-works price

Stanje: rabljeno, številka stroja/vozila: SZFNN23208LD0xxxx, Leto izdelave: 2008, Prosimo, navedite referenčno številko ob povpraševanju: 19910 Specifikacije: - 3 osi - Levi nožni pedal S. 1 - Pnevmatske pnevmatike so v redu - Vrtenje na 3 oseh - Hidravlični pogonski most - Omara za orodje - Deli za zabijanje - Dvojni voziščni pasovi - Na voljo takoj Hsdpev Iu Dzjfx Af Asi Opis: Istrail stroj iz leta 2008. Dvojni hidravlični pogonski mostovi. TÜV: Ne EU odobreno do: 15.05.2025 Lastna teža: 11960 Skupna teža: 48000 Nosilnost: 36040 Širina: 255 Dolžina: 1337 = Dodatne informacije = Za dodatne informacije kontaktirajte ATS Norway.

Stanje: rabljeno, številka stroja/vozila: WFDFLT3300101xxxx, Leto izdelave: 2025, Prosimo, navedite referenčno številko ob povpraševanju: 22242 Tehnični podatki: Hsdpfx Afjyc Dr Ie Aji - 3-osna - Krmiljena os (1. os) - Dvižna os (2 osi) - Zračno vzmetenje - Dobre pnevmatike - Neprekinjene dvojne naletne rampe - Največja nosilnost: 22.860 kg - Takoj dobavljivo Opis: Fliegl prevoznik strojev z neprekinjenimi nakladalnimi rampami. Prikolica je malo uporabljena in je takoj dobavljiva. Možen prevzem lizinga. TÜV: Da EU homologacija do: 23.05.2026 Lastna teža: 7140 kg Skupna teža: 30.000 kg Nosilnost: 22.860 kg Širina: 252 cm Dolžina: 1166 cm Model: DTS 300 Maskinslep – Hidravlična nakladalna rampa – EU homologiran. = Več informacij = Za več informacij kontaktirajte ATS Norway.

Stanje: rabljeno, številka stroja/vozila: WFDFLT3305100xxxx, Leto izdelave: 2005, Prosimo, navedite referenčno številko ob povpraševanju: 22243 Specifikacije: Hsdpfx Aoyc Drujf Aei 3-osna Krmiljena os (1 os) Hidravlične nakladalne rampe Jekleno vzmetenje Največja nosilnost: 23.350 kg Pnevmatike v solidnem stanju Takoj na voljo Opombe: Ena od zapor nakladalne rampe je prešibka in jo je potrebno zavariti (prikazano na fotografiji). Opis: Damm transporter strojev iz leta 2005. Prikolica je odobrena za EU in je takoj na voljo. Hidravlične nakladalne rampe. TÜV: Da EU homologacija do: 01.04.2026 Lastna masa: 6650 kg Skupna masa: 30000 kg Nosilnost: 23350 kg Širina: 255 cm Dolžina: 1175 cm Model: Maskinslep – EU homologiran = Dodatne informacije = Za več informacij kontaktirajte ATS Norway.

Stanje: rabljeno, številka stroja/vozila: SKBS40B30JKE2xxxx, Leto izdelave: 2019, Prosimo, navedite referenčno številko pri povpraševanju: 21327 Specifikacije: Z novo EU-homologacijo Letnik: 2019 Pnevmatike (glej slike) Nove nakladalne rampe Dolžina: 1400 cm Širina: 255 cm Medosna razdalja: 136 / 136 cm Lastna teža: 10.130 kg Največja uporabna nosilnost: 34.870 kg Hjdpfx Afjxctfce Aji Opis: Kel-Berg strojni polpriklopnik s hidravličnimi nakladalnimi rampami. Prikolica se dobavi z novo EU-homologacijo. Zadnja os ni krmiljena. Takoj na voljo. TÜV: Ne EU homologacija do: 22.07.2025 Lastna teža: 10.130 Skupna teža: 45.000 Nosilnost: 34.870 Širina: 255 Dolžina: 1400 Model: Maskinsemi = Dodatne informacije = Za več informacij kontaktirajte ATS Norway.

Stanje: rabljeno, številka stroja/vozila: SA9TRCM319H17xxxx, Leto izdelave: 2009, Prosimo navedite referenčno številko na zahtevo: 21896 Specifikacije: Dobavljeno z novo EU-homologacijo Letnik: 2009 Pnevmatike (glejte slike) Nakladalne rampe Dolžina: 895 cm Širina: 255 cm Medosna razdalja: 136/136 cm Lastna teža: 6.000 kg Največja nosilnost: 19.000 kg Opis: NC prikolica za stroje iz leta 2009 z nakladalnimi rampami. Dobavljeno z novo EU homologacijo. Zavore so bile nedavno obnovljene, rampe pa ojačane. Dobava po dogovoru. TÜV: Da EU odobritev veljavna do: 19.08.2026 Lastna teža: 6000 Skupna teža: 25000 Nosilnost: 19000 Hjdpfexznptsx Af Aoi Širina: 255 Dolžina: 895 Model: BT-24 3-osna prikolica za stroje = Dodatne informacije = Za več informacij se obrnite na ATS Norway.

Stanje: rabljeno, številka stroja/vozila: 145xxxx, Leto izdelave: 1988, Please quote reference number upon request: 20043 Specifications: Length: 1,400 cm Width: 299 cm Wheelbase: 202 cm Net weight: 10,400 kg Unladen weight with driver: 10,475 kg Gross vehicle weight: 58,000 kg Maximum payload: 47,600 kg Fixed width: 3 m Hydraulic ramps: Yes Axle lift on 1st axle and forced steering on 4th axle, can be locked from the cab via a switch Ride height: 90 cm Trailer model: Vang, 1988 Suspension: Air suspension New ABS control unit: Installed approx. 2 years ago Last EU approval: 31.01.2025 Tyres: Good condition Hjdeyduucopfx Af Asi Kingpin: Standard kingpin Description: The machinery trailer is sold together with a hooklift plate and a turntable. Sale only as a set. The truck is not for sale; the trailer is being sold due to limited use. Tüv: No EU approved until: 07.02.2026 Curb weight: 10,400 Total weight: 58,000 Payload: 47,600 Width: 299 Length: 1,400 Model: 1988 Vang SHSL 1111 machinery semi-trailer with hooklift body and turntable = More information = Contact ATS Norway for further details.

Stanje: novo, največja dovoljena obremenitev: 608 kg, skupna masa: 750 kg, dolžina tovornega prostora: 2.100 mm, širina tovornega prostora: 1.110 mm, višina nakladalnega prostora: 350 mm, immediately available other accessories on request: bulkhead rack flat tarpaulin Hsdpoizg N Sefx Af Aoi tarpaulin and frame box body extension

Stanje: rabljeno, številka stroja/vozila: 110, lastna masa: 8.320 kg, največja dovoljena obremenitev: 31.680 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2008, dolžina tovornega prostora: 10.300 mm, širina tovornega prostora: 2.550 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 r17,5, medosna razdalja: 6.500 mm, barva: modra, Oprema: ABS, * Drum brake * 4 axles * Wheelbase 6,500 mm * Hydraulic ramp length 2,850 mm – width 650 mm * Loading edge height 920 mm * Extendable to 3 m Subject to errors and omissions Hsdpfx Afslpav Ue Aei