Drugo Nizki Nakladalnik nakup rabljenega (159)

Stanje: novo, lastna masa: 840 kg, največja dovoljena obremenitev: 2.660 kg, skupna masa: 3.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 1.800 mm, višina nakladalnega prostora: 340 mm, prostornina tovornega prostora: 2,2 m³, barva: srebrn, gradbena višina: 1.670 mm, delovna širina: 2.400 mm, Reverse automatic, hot-dip galvanizing, * IMMEDIATE AVAILABILITY * Technical Specifications: - Type: New vehicle with 2 years TÜV from first registration - Availability: * IMMEDIATE AVAILABILITY * - TÜV: 2 years - Floor: multiplex phenolic resin board with anti-slip surface - Permissible gross weight: 3,500 kg - Unladen weight: 840 kg - Payload: 2,660 kg - Internal dimensions: 400 x 180 x 34 cm (L x W x H) - Loading edge height: 35 cm - Tyres: 195/50R13C steel rims - Brake: yes - Jockey wheel: yes, automatic - incl. vehicle registration papers (logbook) Equipment: - Continuous steel mudguards, walkable - Very robust welded steel frame - Waterproof bonded 18mm phenolic resin plywood floor - Loading area height only approx. 35cm - Maintenance-free rubber torsion axles by KNOTT - KNOTT overrun brake and parking brake - Reverse automatic - Extremely low chassis for minimal loading angle - V-drawbar with support for excavator bucket - Spare wheel holder under excavator bucket support (without spare wheel) - Sturdy steel side walls approx. 34cm high Kedpfou Hrk Hjx Ac Asdw - Galvanized chassis - Heavy-duty loading ramp, approx. 132cm long, with gas strut support - Stable rear stand integrated in the loading ramp (automatic support when ramp is open) - 10x lashing eyes on the sides - Rear frame lighting recessed - Front marker lights - Jockey wheel with central holder - 13-pin plug - Reversing light - Integrated rear fog lamp - incl. transport costs - incl. vehicle documents/COC papers We are happy to offer you suitable financing! Descriptions and images are protected by copyright!! Over 800 trailers available for immediate delivery! We have been a specialist dealer & service workshop for Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. Delivery throughout Germany available at extra cost! Trailer Center BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions, and prior sale excepted -

Stanje: novo, lastna masa: 130 kg, največja dovoljena obremenitev: 620 kg, skupna masa: 750 kg, dolžina tovornega prostora: 2.010 mm, širina tovornega prostora: 1.080 mm, višina nakladalnega prostora: 330 mm, velikost pnevmatike: 145/80r13, Small and maneuverable passenger car trailer from the trailer manufacturer STEMA. The open box trailer Basic is ideal for private transport purposes and small loads. Garden waste, small furniture—perfect for everything you need for personal use or small business needs. As standard equipment, the steel trailer features a jockey wheel, four lashing eyes, high-quality fasteners, galvalum-coated side panels, and a V-drawbar. You can find the complete list of features and technical details below. This model is also available in various versions, for example as a lid trailer or tarpaulin trailer. Kdjdpfxogtq Ede Ac Aow We also offer trailer accessories such as extension sides, tarpaulin and frame, flat tarpaulin, drawbar box, and rear supports. All of our cost-effective offers can also be found on our website. Nationwide delivery within Germany (excluding islands) available! Please feel free to ask us about shipping rates. PKW-Anhänger-Center Ahrens Moordeicher Landstraße 37 28816 Stuhr near Bremen Tel: 0 Fax: Pickup hours: Monday – Friday, – No pickups possible on Saturdays!

Stanje: rabljeno, prva registracija: 02/2001, barva: drugo, Leto izdelave: 2001, License plate: UUM020 Kdjdpfowfquijx Ac Ajw

Stanje: novo, največja dovoljena obremenitev: 16.200 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.250 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r17,5, Oprema: ABS, spojka prikolice, HUMBAUR 21 t Tandem Low Loader, Drive-Over, with Rear Bevel and Folding Steel Ramps, Model HBTZ 217224 BS --- INCLUDES SAF air suspension with lifting/lowering function INCLUDES central axle lift on 1st axle INCLUDES galvanized 400 mm high solid steel front wall INCLUDES protected recessed taillights in rear cross member INCLUDES reinforced continuously height-adjustable drawbar with spindle HOT-DIP GALVANIZED CHASSIS/DRAWBAR Specification: * Gross vehicle weight: 21,000 kg * Payload: approx. 16,200 kg * Loading area: approx. 7,250 x 2,540 mm * Unladen loading height: approx. 870 mm (wheel recesses) * Overall dimensions (LxWxH): approx. 9,400 x 2,550 x 3,710 mm * Galvanized 400 mm high solid steel front wall * Beveled rear loading area * Access ramps with wooden covering, laterally adjustable (approx. 3,100 x 760 mm) with spring lift assist per ramp * Approx. 13° ramp angle * Reinforced, infinitely variable drawbar height adjustment for coupling heights (unladen) approx. 750 - 1,000 mm * DIN screwed towing eye Ø 50 mm * Reinforced 12 t gearbox support winch with load and fast mode * Climbing bars welded to the ramp slope * 8 recessed lashing rings, 10 t each * 16 folding lashing brackets, 2 t each, retractable in outer frame * 2 telescopic folding supports at rear of vehicle * 2-line air brake system with ALB function * EBS brake system, 24V including EBS connection according to ISO 7638; note: towing vehicle must have ABS/EBS connection * Spring-actuated parking brake * Steel mudguards, hot-dip galvanized * Floor and ramps with softwood planks * Chassis with drawbar hot-dip galvanized via immersion bath * 235/75 R17.5 tyres (8 units) * Electrics: 15-pin, 24 volts * Brake connection: 2 foolproof coupling heads, red/yellow, ISO 1728 Kodpfx Aokn N Rwjc Aedw Your Benefits: * Optimum corrosion protection thanks to immersion bath hot-dip galvanizing * Safe loading and unloading via telescopic folding props at rear and welded climbing bars on the ramps * Simple and easy handling of the steel ramps thanks to ramp lift assists * Ideal load securing options thanks to standard lashing points * The reinforced, infinitely adjustable drawbar allows compatibility with various coupling heights of towing vehicles * Low net weight = high payload --- Optional * Hydraulic ramp lift assist ∗Stock vehicle – available immediately ∗Subject to prior sale ∗Ex works price

Stanje: novo, lastna masa: 826 kg, največja dovoljena obremenitev: 2.674 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.700 mm, širina tovornega prostora: 1.700 mm, višina nakladalnega prostora: 200 mm, prostornina tovornega prostora: 1,3 m³, barva: srebrn, gradbena višina: 1.970 mm, delovna širina: 2.320 mm, Reverse automation, hot-dip galvanization, incl. TracStrap cargo securing system / heavy-duty ramp / extremely robust construction / perforated tie-down floor / LED lighting / spare wheel / shovel holder, * IMMEDIATE AVAILABILITY * incl. TracStrap cargo securing system / heavy-duty ramp / extremely robust construction / perforated tie-down floor / LED lighting / spare wheel / shovel holder. TECHNICAL DATA - Brand: Brian James - Model: Digger Plant 2 - Vehicle type: Construction machinery trailer - Vehicle condition: New - First registration: None - TÜV (roadworthiness inspection): 2 years from first registration - Internal dimensions (LxWxH): 370 x 170 x 20 cm - External dimensions (LxWxH): 562 x 232 x 197 cm - Loading floor height: 40 cm - Permissible total weight: 3,500 kg - Unladen weight: 826 kg - Payload: 2,674 kg - Chassis: Low loader (wheels beside the platform) - Tyres: 195/60R12C - Suspension: AL-KO rubber torsion axle - Jockey wheel: Yes - 100 km/h approval: Optional, retrofittable DESCRIPTION - Robust steel mudguards with anti-slip perforated profile - Reinforced perforated steel side floors - Centre 18mm phenolic plywood floor, anti-slip and waterproof - Very sturdy welded steel frame - Frame fully hot-dip galvanized by immersion - Chassis with two additional longitudinal members under the load platform - Continuous heavy-duty perforated steel ramp, galvanized, with spring assistance - Robust ACME locking system: closes silently, loading ramps secured with safety compression locks, rubber buffers for noise dampening - Very low chassis for minimal loading angle - Digger bucket rest - 10x lashing eyes mounted on side wall (1000 daN/kg), TÜV certified - TracStrap Kit (Heavy-Duty), TÜV certified cargo securing system - Revolutionary system - First-class securing for tracked vehicles - Ready to depart in the shortest time - Adjustable front wheel chocks for positive-load securing - 2x ratchet straps (LC 5000 daN) for securing over tracks - Free choice of anchoring points in perforated steel floor - Maintenance-free axles and suspension systems for long hauls and heavy loads - Spare wheel mounted accessibly on side wall - Reverse automation - AL-KO overrun brake system and handbrake - Cast steel coupling head with integrated high-security AL-KO lock - Highly stable reinforced V-drawbar - 13-pin connector - Complete LED lighting: extremely bright, durable and reliable - Rear LED position lights - Reversing lights - Integrated rear fog light - Robust tail light protection - Heavy-duty jockey wheel - 5-year chassis warranty Optional accessories on request: - Digger bucket cage - Lashing straps - Tool box - Winch - and much more New vehicle with warranty and TÜV. We are happy to offer you suitable financing! Descriptions and images are protected by copyright! Over 800 trailers available from stock! We have been specialist dealers and repair workshop for Brian James / Humbaur / Hapert / Unsinn / Cheval Liberté / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years - delivery throughout Germany available for a surcharge! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions, and prior sale excepted - Kodpfx Aju Hrlwjc Ajdw

Stanje: novo, lastna masa: 4.600 kg, največja dovoljena obremenitev: 166.400 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.500 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 3.710 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r17,5, Oprema: ABS, spojka prikolice, HUMBAUR 21 t Tandem Low-Loader – Drive-Over Type, Rear Bevel, Foldable Steel Ramps, Model HBTZ 216524 BS --- INCLUDES: SAF air suspension with lift/lower function INCLUDES: Central axle lift on 1st axle INCLUDES: Galvanized 400 mm high solid steel front wall INCLUDES: Protected recessed rear lights in end beam INCLUDES: Reinforced, infinitely adjustable tow-bar height via spindle --- HOT-DIP GALVANIZED CHASSIS/TOW-BAR Equipment: * Gross vehicle weight: 21,000 kg * Payload: approx. 16,400 kg * Loading area: approx. 6,500 x 2,540 mm * Unladen loading height: approx. 870 mm (wheel well) * Overall dimensions (LxWxH): approx. 8,700 x 2,550 x 3,710 mm * Galvanized 400 mm high solid steel front wall * Rear loading area with ramped/beveled end * Wooden-covered, laterally adjustable loading ramps (approx. 3,100 x 760 mm) * Standard spring-assisted ramp lifts (hydraulic ramp assist available at extra charge) * Approx. 13° ramp angle * Reinforced, infinitely adjustable tow-bar height for coupling heights (unladen) approx. 750–1,000 mm * DIN bolt-type towing eye, Ø 50 mm * Reinforced 12 t gearbox support winch with load and quick gear * Welded climbing strips on the ramp bevel * 8 recessed 10 t lashing rings * 16 fold-down 2 t lashing brackets in the outer frame * 2 telescopic foldable rear supports * Dual-circuit air brake system with ALB (Automatic Load Sensing Valve) * EBS braking system, 24 V with ISO 7638 connector (Note: towing vehicle must have ABS/EBS connection) * Spring-actuated parking brake * Hot-dip galvanized steel mudguards * Softwood planking for floor and ramps * Hot-dip galvanized chassis frame and tow-bar (dip process) * Tyres: 235/75 R17.5 (8 units) * Electrical system: 15-pin, 24 V Kdsdpfx Acekcuyzo Asw * Brake connection: 2 interchangeable coupling heads (red/yellow) to ISO 1728 Your advantages: * Optimal corrosion protection through dip galvanizing * Safe loading/unloading thanks to telescopic, folding rear supports and welded climbing strips * Simple and easy handling of steel loading ramps via ramp lifts * Excellent load securing options thanks to standard lashing points * Reinforced, steplessly height-adjustable tow-bar ensures compatibility with different towing vehicle coupling heights * Low unladen weight – high payload capacity --- Optional: * Hydraulic ramp lift system *Stock vehicle – available immediately *Subject to prior sale *Price ex works

Stanje: novo, lastna masa: 557 kg, največja dovoljena obremenitev: 2.143 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 2.800 mm, širina tovornega prostora: 1.300 mm, višina nakladalnega prostora: 200 mm, prostornina tovornega prostora: 0,7 m³, barva: srebrn, gradbena višina: 1.970 mm, delovna širina: 1.790 mm, Reverse automatic system, hot-dip galvanization, extremely robust construction, perforated lashing floor, LED lighting, jockey wheel, bucket holder, * IMMEDIATELY AVAILABLE * extremely robust construction / perforated lashing floor / LED lighting / jockey wheel / bucket holder TECHNICAL DATA - Brand: Brian James - Model: Digger Plant 2 - Vehicle type: Construction Machinery Trailer - Vehicle Condition: New Vehicle - First registration: Unregistered - MOT/Inspection: 2 years from first registration - Interior dimensions (LxWxH): 280 x 130 x 20 cm - Exterior dimensions (LxWxH): 465 x 179 x 197 cm - Loading height: 38 cm - Permissible total weight: 2,700 kg - Unladen weight: 557 kg - Payload: 2,143 kg - Chassis: Low loader (wheels beside the body) - Tyres: 165R13C - Suspension: ALKO rubber torsion axle - Jockey wheel: Yes - 100 km/h approval: Optional, retrofittable DESCRIPTION - Robust steel fenders with non-slip perforated profile - Reinforced perforated steel side floor inside - Central anti-slip and waterproof 18 mm phenolic plywood floor - Highly stable welded steel frame - Frame completely hot-dip galvanized - Chassis with two additional longitudinal beams under the loading area - Perforated steel single loading ramps, galvanized, adjustable, L=1.62 m - Stable ACME locking system: locks silently, ramps secured by safety clamp locks, rubber buffers absorb noise - Ultra low chassis for reduced ramp angle - Excavator bucket holder - 10x lashing eyes on sidewalls (1000 daN/kg) TÜV-certified - Free choice of lashing points in perforated steel floor - Maintenance-free axles and damping systems designed for long journeys and heavy loads - Spare wheel easily accessible, mounted on sidewall - Reverse automatic system - ALKO overrun brake system and parking brake - Steel cast coupling head with integrated ALKO high-security lock - Highly robust reinforced V-drawbar - 13-pin plug - Full LED lighting: extremely bright, durable, and reliable - Reversing lamp - Integrated rear fog lamp - Robust taillight protection - Heavy-duty jockey wheel - 5-year chassis warranty Accessories available - please inquire! - TracStrap load securing system - Bucket cage - Lashing straps - Tool box - Winch - and much more New vehicle with warranty and MOT. Financing available upon request! Descriptions and pictures are copyright protected!! Over 800 trailers available immediately! We have been your Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix authorized dealer & repair workshop for over 30 years – delivery throughout Germany available for an additional charge! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, mistakes and prior sale reserved - Kedpfx Aeu Hmdhoc Ajdw

Stanje: novo, največja dovoljena obremenitev: 24.000 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.550 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 880 mm, Oprema: ABS, osrednja vrtljiva plošča, spojka prikolice, HUMBAUR 3-axle turntable low loader with cranked loading platform/high deck, model HTD309525-K - PARABOLIC SUSPENSION - V2 --- INCLUDED: * Chassis frame and turntable galvanised by hot-dip immersion * Parabolic suspension with rear axle equalizer unit * ABS braking system (suitable for tractor and truck) * 12 & 24 Volt LED multi-voltage lighting system * Warning package and rotating beacon Equipment: * 24 months warranty * Permissible total weight: 30,000 kg * Payload: approx. 24,000 kg * Chassis frame and turntable hot-dip galvanised * Parabolic suspension with rear axle equalizer unit * ABS braking system (suitable for tractor and truck) * 12 & 24 Volt LED multi-voltage lighting system, 15-pin 24V connector and 13-pin adapter * Loading height: approx. 880 mm * Tyres: 235/75R17.5 – 12 times * Low loader platform: 6,500 mm including approach ramp * B-dimension: 10,760 mm * Drawbar with 8° inclined towing eye, Ø 40 mm, height adjustable * 3-position drawbar mount for various truck coupling heights * 3 pairs of 10 t lashing rings, recessed in low bed * 2 pairs of 10 t lashing rings, recessed in high bed * 4 pairs of 3 t lashing points on outer frame of low bed * 4 pairs of 2 t lashing points above wheel cut-out at 2nd and 3rd axle * Chassis frame and turntable hot-dip galvanised * One-piece ramps, approx. 3150 x 750 mm, with spring assist and mechanical lateral shift * Ramp angle: approx. 10-11° Ksdekn N R Espfx Ac Aodw * Softwood flooring for loading platform and ramps * Rear pendulum support legs * Climbing strips welded onto approach ramp * 30,000 kg gross weight only with special permit according to §70 * Brake connections: red/yellow * Warning package and rotating beacon --- Modular design for easy retrofitting with 3 m folding extension, toolbox in high deck, plank box under the loading platform, etc. --- *Stock vehicle – immediately available *Subject to prior sale *Ex works price

Stanje: novo, lastna masa: 660 kg, največja dovoljena obremenitev: 2.840 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.000 mm, širina tovornega prostora: 1.500 mm, višina nakladalnega prostora: 340 mm, prostornina tovornega prostora: 1,4 m³, barva: srebrn, gradbena višina: 1.670 mm, delovna širina: 2.100 mm, Reverse automatic system, hot-dip galvanization, * IMMEDIATELY AVAILABLE * Technical data: - Type: New vehicle with 2 years TÜV from first registration - Availability: IMMEDIATE - TÜV: 2 years - Floor: multiplex phenolic plywood with anti-slip surface - Permissible gross weight: 3,500 kg - Unladen weight: 660 kg - Payload: 2,840 kg - Internal dimensions: 300 x 150 x 34 cm (L x W x H) - Loading edge height: approx. 35 cm - Tires: 195/50R13C steel rims - Brakes: yes - Jockey wheel: yes, automatic - incl. vehicle documents (registration certificate) Equipment: - Continuous walk-on steel mudguards - Very robust welded steel frame - Waterproof bonded 18mm thick phenolic floor - Loading surface height only approx. 35cm - Maintenance-free rubber torsion axles by KNOTT - KNOTT overrun hitch and parking brake - Reverse automatic system - Very low chassis for minimal loading angle - V-drawbar with support for excavator bucket - Spare wheel holder under excavator bucket rest (without spare wheel) - Sturdy steel side walls approx. 28cm high - Galvanized chassis - Heavy-duty loading ramp, approx. 132cm long, with gas strut assistance - Sturdy integrated rear support in the loading ramp (automatic stabilization when ramp is open) - 8x side lashing rings - Recessed lighting in rear frame - Front marker lights - Center jockey wheel with holder - 13-pin plug - Reversing light - Integrated rear fog light - incl. delivery costs - incl. vehicle/COC documents We are happy to offer you suitable financing options! Descriptions and images are protected by copyright!! Over 800 trailers immediately available! For over 30 years we have been an authorised dealer & service workshop for Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix. Delivery possible Germany-wide for a surcharge! Trailer Center BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Subject to error, omission, and prior sale - Kodpfx Acsu Hrh Eo Ajdw

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.550 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 880 mm, Oprema: ABS, osrednja vrtljiva plošča, spojka prikolice, HUMBAUR 3-axle turntable low-loader with recessed loading platform/high deck, Model HTD309525-K – PARABOLIC SUSPENSION – V2-Plus --- INCLUSIVE: Chassis frame and turntable hot-dip galvanized by immersion Kedpfxokn N S Ae Ac Asdw Parabolic suspension with rear axle equalization unit ABS braking system (suitable for tractor units and trucks) 12 & 24 Volt LED multi-voltage lighting system Warning package and rotating beacon Stake pockets and lashing package Integrated toolbox at the front of the deck, with folding lid 3-meter widening package with storage compartment Features: * 24 months warranty * Permissible total weight: 30,000 kg * Payload: approx. 23,500 kg * Chassis frame and turntable hot-dip galvanized by immersion * Parabolic suspension with rear axle equalization unit * ABS braking system (suitable for tractor units and trucks) * 12 & 24V LED multi-voltage lighting system, 15-pin 24V connector and 13-pin adapter * Load height approx. 880 mm * Tyres: 235/75R17.5 – 12-ply * Low-loader platform: 6,500 mm incl. drive-on slope * B-dimension: 10,760 mm * Drawbar with 8° angled towing eye Ø 40mm, height-adjustable * 3-way drawbar mount for various truck coupling heights * Integrated toolbox at the front of the deck, with folding lid * 3 pairs of recessed lashing rings, 10 t, in the low deck * 2 pairs of recessed lashing rings, 10 t, in the high deck * 4 pairs of lashing points, 3 t, in the outer frame of the low deck * 3 pairs of bolted lashing eyes, 6 t, on the outer frame * 4 pairs of lashing points, 2 t, above the wheel cut-outs on 2nd and 3rd axle * 6 pairs of stake pockets in the outer frame (stake pocket package) * Chassis frame and turntable hot-dip galvanized by immersion * One-piece ramps, approx. 3150 x 750 mm, with spring lifting system and mechanical side shift * Drive-on angle approx. 10-11° * Softwood decking for loading platform and ramps * Pendulum support legs at rear * 3-meter widening package with folding outriggers, wooden planks * Steel toolbox under the loading platform, lockable, mounted on the side under the deck for wooden plank storage * Climbing strips welded onto the drive-on slope * 30,000 kg gross vehicle weight rating only with special permit according to §70 * Brake connections: red/yellow * Warning package and rotating beacon --- Optional versions at extra cost: * V2 Plus with hydraulic ramp assist = €1,000 net surcharge * V2 PlusPlus (spring assist) with excavator recess = €700 net surcharge * V2 PlusPlus with hydraulic ramp assist & excavator recess = €1,700 net surcharge --- *Stock vehicle – immediately available *Interim sale reserved *Ex works price

Stanje: novo, lastna masa: 596 kg, največja dovoljena obremenitev: 2.904 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.000 mm, širina tovornega prostora: 1.620 mm, višina nakladalnega prostora: 230 mm, prostornina tovornega prostora: 1 m³, barva: srebrn, gradbena višina: 1.500 mm, delovna širina: 2.080 mm, Reverse automatic function, loading ramps, hot-dip galvanising, 18 mm floor plate, parabolic suspension, tapered rear, *IMMEDIATELY AVAILABLE* incl. 18 mm floor plate / parabolic suspension / loading ramps / tapered rear. Technical data: - Type: New vehicle - MOT: New/2 years - Availability: IMMEDIATE! - Permissible total weight: 3,500 kg - Unladen weight: 596 kg - Payload: 2,904 kg - Internal dimensions: 300 x 162 x 23 cm (L x W x H) - Overall external dimensions: 482 x 208 x 150 cm (L x W x H) - Loading edge height: approx. 33 cm - Tyres: 12 inch - Brakes: yes - Jockey wheel: yes, automatic - 100 km/h approval: optional - incl. vehicle documents Body: - Floor: 18 mm phenolic resin-coated plywood - Side walls: full steel panels - Side wall height: 23 cm - Chassis: KNOTT parabolic suspension - Tipping function: no Ksdpfxsu Hriis Ac Aodw - Hydraulics: - - Ramp approach angle: approx. 22° - Overrun device & brake: KNOTT - Frame/chassis: welded steel frame, hot-dip galvanised - Side extensions: no - Lashing eyes: 8 pieces on side frame (1000 kg/daN each) - Supports: integrated into ramps - Ramps: 2 upright on axle, loadable up to 1500 kg - Lighting plug: 13-pin - Approval: COC documents Standard equipment: - Welded side wall/frame construction made of steel sheet, hot-dip galvanised by immersion - Very robust bolted V-drawbar REINFORCED - Side walls 23 cm high - Hot-dip galvanised steel loading ramps upright - Very robust welded steel frame - Massive walk-on steel mudguards - Frame completely hot-dip galvanised by immersion - Parabolic suspension axles (leaf suspension) - Beaver tail rear / low approach for working platforms and excavators - Many strong crossmembers for high point loads - Lashing rings mounted in outer frame, 8 pieces (4 pairs), tensile force 1000 kg per ring - Reverse automatic function - KNOTT overrun device and parking brake - Robust ramp locks - 13-pin plug - Reversing lights - Large-sized safety lighting - Integrated rear fog light - Lighting recessed in rear frame - Rear side position lights - Central automatic jockey wheel - Registration documents: COC papers Retrofittable accessories—enquire for details: - 100 km/h approval - Shovel holder - Spare wheel - Storage box - Net hooks - Additional lashing eyes - Reversing lights - Lashing straps - And much more. New vehicle with warranty and MOT. We can also offer you suitable financing! Descriptions and images are copyright-protected!! Over 800 trailers immediately available from stock! We have been a specialist dealer and service workshop for Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. Delivery throughout Germany for an additional fee possible! Trailer Centre BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt Errors, omissions and prior sale are reserved.

Stanje: novo, največja dovoljena obremenitev: 31.300 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.130 mm, širina tovornega prostora: 3.000 mm, višina nakladalnega prostora: 890 mm, vzmetenje: zrak, Oprema: ABS, osrednja vrtljiva plošča, spojka prikolice, Humbaur HTD40-K V20 Permissible total weight: 40,000 kg Payload approx. 31,350 kg Chassis frame hot-dip galvanized Turntable frame hot-dip galvanized Access ramps hot-dip galvanized Air suspension with manual rear lowering SAF axle with drum brake EBS electronic braking system Kdsdpfx Acokn N Sus Aew Tyres: 235/75R17.5 – 16 ply Low bed length approx. 7,160 mm Recess for excavator arm storage, approx. 3,000 mm x 730 mm x 180 mm, at the rear section of the low bed 4 pairs of recessed 10 t lashing rings in the low bed 2 pairs of recessed 10 t lashing rings in the high bed 4 pairs of 3 t lashing points on the external frame of the low bed 3 pairs of 6 t lashing eyes on the external frame 4 pairs of stake pockets on the outer frame of the high bed 4 pairs of stake pockets on the outer frame of the low bed 3-meter widening package with fold-out extensions, straight design 4 warning signs with lighting Rotating beacon at the rear Storage compartment under the loading area 2 storage compartments with folding lids on the high platform Hydraulic ramp lifters One-piece ramps approx. 3,150 x 750 mm Softwood flooring for loading area and ramps 40,000 kg GVWR only with special permit according to §70 * Stock vehicle – immediately available * Subject to prior sale * Price ex works

Stanje: novo, lastna masa: 773 kg, največja dovoljena obremenitev: 2.727 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.000 mm, širina tovornega prostora: 1.800 mm, višina nakladalnega prostora: 300 mm, prostornina tovornega prostora: 1,6 m³, barva: srebrn, gradbena višina: 1.700 mm, delovna širina: 2.320 mm, Spare wheel, automatic reverse system, drive-on ramp, hot-dip galvanization, rear ramp, parabolic suspension, bucket holder, *IMMEDIATELY AVAILABLE incl. rear ramp / parabolic suspension / spare wheel / bucket holder Technical Data: - Brand: Variant - Model: 3518 M3 - Vehicle type: Construction machinery trailer - Vehicle condition: New vehicle - First registration: None - TÜV/HU: 2 years from first registration - Internal dimensions (LxWxH): 300 x 180 x 30 cm - External dimensions (LxWxH): 498 x 232 x 170 cm - Loading height from ground: 38 cm - Perm. gross weight: 3,500 kg - Unladen weight: 773 kg - Payload: 2,727 kg - Chassis: Low loader (wheels beside deck) - Tyres: 195/60R12C - Suspension: KNOTT parabolic spring suspension - Jockey wheel: Yes - 100 km/h approval: Optional, retrofittable Body: - Brakes: Yes - Number of axles: 2 - Floor: Wooden floor - Side panels: Single-wall sheet steel - Side panel height: 30 cm - Locks: Excenter locks - Number of pallet spaces: 6 - Multi-purpose vehicle: No - Tip / lowering function: None - Hydraulic pump: - - Overrun device/brake: KNOTT - Frame/chassis: Welded steel frame - Galvanization: Hot-dip galvanized - Drawbar: V-drawbar, bolted, C-profile - Mudguards: Aluminium tread plate mudguards - Spare wheel: Yes - Bucket rest: Yes - Superstructures/add-ons: None - Ramp compartment: None - Ramps/loading flap: Yes - Ramp type: Full-width rear flap - Ramp load capacity: - - Ramp gradient: approx. 17° - Supports: integrated in rear flap - Lashing eyes: 16 - Rear lights: Bulb lights, recessed in rear frame - Side marker lights: - - Lighting plug: 13-pin - Vehicle documents: ZBII & COC papers Standard Equipment: - Reinforced, walk-on aluminium checker plate mudguards - Slip-resistant lattice step on sides - 18 mm film faced plywood floor, anti-slip and waterproof - Extremely robust, fully welded tubular lattice frame - Frame hot-dip galvanized in full immersion bath - Standing steel loading ramp on roller 130 cm - Heavy-duty excenter locks - Support brackets at loading ramp Kodpfx Aou Hrivsc Ajdw - Ramp lift assist - Very low chassis for minimal ramp angle - Excavator bucket holder at front - Spare wheel mounted under excavator bucket holder - 10x lashing eyes on outer frame (1000 daN/kg) - 6x lashing rings on inside - KNOTT parabolic spring axle - Parabolic spring axle for heavy-duty use - Automatic reversing system - KNOTT overrun device and parking brake - Lockable coupling head - Spare wheel mounted under excavator bucket holder - Very sturdy, bolted reinforced V-drawbar - 13-pole plug - Reversing lights - Large dimension safety lighting - Integrated rear fog lamp - Lighting recessed in rear frame - Lane marker lights at rear with rubber arm - Heavy-duty centrally mounted jockey wheel Optional accessories – available upon request: - 100 km/h approval - Tool/storage box - Net hooks - Additional lashing eyes - Reversing lights - Lashing straps - and much more New vehicle with warranty and TÜV. We are happy to offer suitable financing! Descriptions and images are protected by copyright!! Over 800 trailers immediately available from us! We have been a specialist dealer & repair workshop for over 30 years for Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix – Delivery throughout Germany available for a surcharge! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt Errors, omissions, and prior sale excepted -

Stanje: novo, lastna masa: 2.800 kg, največja dovoljena obremenitev: 10.200 kg, skupna masa: 13.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.200 mm, širina tovornega prostora: 2.460 mm, višina nakladalnega prostora: 3.260 mm, velikost pnevmatike: 245/70 r17,5, Oprema: ABS, dvižna zadnja plošča, spojka prikolice, HUMBAUR 13.0 t Tandem Low Loader – Drive-On, with Rear Slope and Folding Steel Ramps, Model HBT 136224 BS INCLUDES galvanized grating on loading ramps at rear INCLUDES anodized aluminum drop sides HOT-DIP GALVANIZED CHASSIS/DRAWBAR Specification: * Permissible total weight: 13,000 kg * Payload approx. 10,200 kg * Loading area approx. 6,200 x 2,460 mm * Unladen loading height approx. 920 mm * Overall dimensions (LxWxH): approx. 8,350 x 2,550 x 3,260 mm * 400 mm high anodized aluminum drop sides, folding and removable on the sides; corner stanchions galvanized, front and rear detachable * Rear loading surface is sloped * Loading ramps with galvanized grating, laterally adjustable (approx. 2,600 x 540 mm) with gas spring assist per ramp * Continuously height-adjustable drawbar for coupling heights unladen approx. 700–1,000 mm * Reinforced 12 t geared support winch with load and fast speed gear * 6 flush-mounted 6 t lashing rings * 14 fold-down 2 t lashing brackets in the external frame * 2 telescopic folding rear supports Kdsdpfokn N R Tex Ac Asw * Dual-circuit air brake system with ALB function * 24V ABS braking system * Spindle handbrake * Hot-dip galvanized steel mudguards * Softwood plank flooring * Chassis frame and drawbar hot-dip galvanized by immersion bath * Tires: 245/70 R17.5 * Maintenance-free parabolic suspension with load equalization * Electrical system: 15-pin, 24V * Brake connection: 2 mistake-proof coupling heads, red/yellow as per ISO 1728 Your Advantages: * High-quality, corrosion-protected anodized aluminum side wall superstructure * Optimum corrosion protection thanks to immersion bath hot-dip galvanization * Safe (un)loading thanks to telescopic folding rear supports and slip-resistant ramp grating * Effortless handling of steel loading ramps via ramp lifters * Ideal load securing options thanks to standard lashing points * Continuously height-adjustable drawbar ensures compatibility with varying coupling heights of towing vehicles * Low unladen weight enables high payload *Stock vehicle – immediately available *Subject to prior sale *Ex works price

Stanje: novo, lastna masa: 770 kg, največja dovoljena obremenitev: 2.730 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.600 mm, širina tovornega prostora: 1.800 mm, višina nakladalnega prostora: 300 mm, prostornina tovornega prostora: 1,9 m³, barva: srebrn, gradbena višina: 2.030 mm, delovna širina: 2.300 mm, Reverse automatic system, drive-on ramps, hot-dip galvanization, rear swiveling ramps, 12 lashing rings, * IMMEDIATE AVAILABILITY * incl. rear swiveling ramps / 12 lashing rings / drive-on ramps Technical specifications: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATE! - Permissible total weight: 3,500 kg - Unladen weight: 770 kg - Payload: 2,730 kg - Internal dimensions: 360 x 180 x 30 cm (L x W x H) - Total external dimensions: 558 x 230 x 203 cm (L x W x H) - Loading edge height: 45 cm - Tires: 185R14C steel rim - Brakes: yes - Jockey wheel: yes, automatic - 100 km/h: available at extra cost - incl. vehicle documents Body Structure: - Floor: 18 mm phenolic plywood - Side walls: solid steel side panels - Side wall height: 30 cm - Chassis: ALKO rubber suspension axle - Tipping function: no - Hydraulic: - - Ramp angle: approx. 14° - Overrun device & brake: ALKO - Frame/chassis: welded steel frame, hot-dip galvanized - Extension: at extra cost - Lashing rings: 22 pieces, mounted laterally in the frame (2,000 kg/daN) - Supports: integrated into the ramps - Ramps: 2x aluminum, upright on shaft, swiveling - Lighting connector: 13-pin - Registration: ZBII & COC documents Standard equipment: - New feature: side-folding ramps for loading with forklift - Unique, torsion-resistant longitudinal beam chassis for safe driving characteristics - Loading surface made of multi-layer bonded phenolic plywood, 18 mm, seamless, anti-slip and waterproof - Hollow profile construction, fully welded and hot-dip galvanized in immersion bath - Body made from robust steel side wall profiles - Reinforced automatic jockey wheel for stable parking of loaded trailer, load capacity 500 kg, with non-slip grating and integrated supports - Premium maneuvering handle with strap reel - 12 pairs of cargo securing points, each rated to up to 2,000 daN per lashing point - Frame completely hot-dip galvanized in immersion bath - 2 foldable and laterally adjustable aluminum drive-on ramps with integrated ground support, side swiveling, 3,500 kg/pair load capacity - Reverse automatic system - ALKO overrun device and parking brake - Sturdy ramp locks - 13-pin plug - Reversing lights - Large-sized safety lighting - Integrated rear fog light - Lighting recessed in rear frame - Central automatic jockey wheel - Registration documents: ZBII and COC documents Special equipment included in the price: - Aluminum swiveling ramps at the rear Optional accessories available upon request: - Bucket rest - 100 km/h approval with shock absorbers - Side wall extension - Mesh extension 60 cm - Closed steel extension 60 cm - Spare wheel - Toolbox - Net hooks - Additional lashing rings - Slotted-hole rails for tie-down straps & locking bars - Batten strip with rubber coating for tie-down straps & locking bars - Reversing light - Lashing straps - and more Kdjdpju Hrkaefx Ac Aew New vehicle with warranty and TÜV. Financing offers available! Descriptions and images are protected by copyright!! Over 800 trailers immediately available on site! We have been specialist dealers & repair workshop for Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. Delivery throughout Germany available at extra cost! Anhaenger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt Errors, omissions, and prior sale reserved.

Stanje: novo, največja dovoljena obremenitev: 14.500 kg, skupna masa: 1.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.460 mm, višina nakladalnega prostora: 870 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r17,5, Oprema: ABS, dvižna zadnja plošča, spojka prikolice, HUMBAUR 19 t Tandem Low-Loader, Drive-Over Design with Rear Taper and Foldable Steel Ramps, Type HBTZ 197224 BS --- INCLUDES SAF Air Suspension with Raise/Lower Valve INCLUDES HOT-DIP GALVANIZED CHASSIS/DRAWBAR INCLUDES 400 mm High Galvanized Steel Front Wall, Removable INCLUDES 400 mm High Anodized Aluminium Drop Sides incl. Galvanized Centre Stanchions Specification: * Gross Vehicle Weight: 19 t (2 x 9 t axle load and 1 t drawbar load) * Payload approx. 14.5 t (without drop side body) * Load area length 7,200 mm incl. rear taper Kdodpfskn N Siox Ac Aow * Loading height (unladen): approx. 870 mm * Removable galvanized steel front wall, 400 mm high * 400 mm high anodized aluminium drop sides incl. galvanized centre stanchions * Overall dimensions (LxWxH): approx. 9,380 x 2,550 x 3,700 mm * Rear tapered load floor * Loading ramps with wooden decking, laterally adjustable * Steel ramps approx. 3,100 x 760 mm with spring assist * Loading angle only approx. 11° * SAF low-loader axles with sealed S-cam brakes * Air suspension with raise/lower function * EBS braking system with stability program compliant to ECE regulations * Parking brake with spring actuators * Twin tyres: 235/75R17.5" * Hot-dip galvanized drawbar, stepless adjustable via reinforced height adjustment, with DIN screw-in eye Ø 50 mm * Coupling height: approx. 750–1,000 mm * Reinforced 12 t geared support winch with load and rapid modes * 8 recessed lashing rings, each rated at 10 t * 16 fold-down lashing brackets, each rated at 2 t, on outer frame * 2 telescopic folding supports at rear of vehicle * Chassis, ramps, and steel front wall hot-dip galvanized by immersion * Bridge floor with wooden decking and STEEL chequer plate over wheels * Mudguards with anti-spray system * 2 wheel chocks with holder * Electrics: 15-pin, 24 Volt * Brake connections: 2 anti-confusion ISO 1728 coupling heads (red/yellow) Your benefits: * Optimal corrosion protection via hot-dip galvanization * Safe loading and unloading thanks to telescopic folding rear supports * Easy handling of steel loading ramps thanks to ramp assist springs * Excellent load securing capabilities with standard integrated lashing options * Stepless adjustable drawbar for compatibility with various towing vehicle coupling heights * Low unladen weight delivers high payload --- Optional: * Hydraulic ramp lift ∗ Stock vehicle – available immediately ∗ Subject to prior sale ∗ Ex works price

Stanje: novo, lastna masa: 781 kg, največja dovoljena obremenitev: 2.719 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.700 mm, širina tovornega prostora: 1.700 mm, višina nakladalnega prostora: 200 mm, prostornina tovornega prostora: 1,3 m³, barva: srebrn, gradbena višina: 1.970 mm, delovna širina: 2.320 mm, Reverse automatic system, hot-dip galvanization, incl. TracStrap load securing system / single ramps / extremely robust construction / perforated lashing floor / LED lighting / jockey wheel / shovel holder, * IMMEDIATELY AVAILABLE * incl. TracStrap load securing system / single ramps / extremely robust construction / perforated lashing floor / LED lighting / jockey wheel / shovel holder TECHNICAL DATA - Brand: Brian James - Model: Digger Plant 2 - Vehicle type: Construction machinery trailer - Vehicle condition: New vehicle - First registration: Without first registration - TÜV inspection: 2 years from first registration - Internal dimensions (LxWxH): 370 x 170 x 20 cm - External dimensions (LxWxH): 562 x 232 x 197 cm - Loading height floor: 40 cm - Perm. total weight: 3,500 kg - Unladen weight: 781 kg - Payload: 2,719 kg - Chassis: Low-bed trailer (wheels beside the body) - Tyres: 195/60R12C - Suspension: ALKO rubber torsion axle - Jockey wheel: Yes - 100 km/h approval: Optional, retrofittable DESCRIPTION - Robust steel fenders with non-slip perforated profile - Reinforced perforated steel side floor inside - Central anti-slip, waterproof phenolic plywood floor, 18mm - Highly stable welded steel frame - Frame fully hot-dip galvanized by immersion bath - Chassis with two additional longitudinal beams underneath the loading area - Perforated steel single ramps, galvanized, adjustable, L=1.62m - Sturdy ACME locking system: Silent closing, loading ramps held in place by safety clamp locks, rubber buffers reduce noise - Very low chassis for shallow approach angle - Digger bucket carrier - 10x lashing rings on side walls (1000 daN/kg) TÜV certified - TracStrap Kit (Heavy-Duty), TÜV-certified load securing system - Revolutionary system - Premium securing for tracked vehicles - Ready for departure within minutes - Front wedges are adjustable and provide the basis for form-fit load securing - 2x tension straps (LC 5000 daN) to lash over the tracks - Free choice of lashing points when securing loads in the perforated steel floor - Maintenance-free axles and damping systems designed for long journeys and heavy loads - Spare wheel mounted for easy access on the side wall - Reverse automatic system - ALKO overrun device and parking brake - Coupling head made of cast steel with integrated high-security ALKO lock - Very robust reinforced V-drawbar - 13-pin plug - Complete LED lighting: Extremely bright, durable and reliable - Rear LED marker lights - Reversing spotlight - Integrated rear fog light - Robust rear light protection Kjdpfou Hrlkjx Ac Aedw - Heavy-duty jockey wheel - 5 years chassis warranty Optional accessories - please inquire! - Digger bucket cage - Lashing straps - Toolbox - Winch - And much more New vehicle with warranty and TÜV. Financing options available! Descriptions and images are copyright protected!! Over 800 trailers immediately available from our stock! We have been a specialist dealer & repair workshop for Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. Nationwide delivery within Germany available for a surcharge! Trailer Center BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt Errors, omissions, and prior sale excepted -

Stanje: novo, največja dovoljena obremenitev: 16.400 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r17,5, Oprema: ABS, spojka prikolice, HUMBAUR 21 t Tandem Low-Loader Drive-Over with Rear Taper and Folding Steel Ramps, Model HBTZ 217224 BS --- INCLUDES SAF air suspension with raise/lower function INCLUDES central axle lift on the 1st axle INCLUDES galvanized 400 mm high solid steel front wall INCLUDES recessed protected rear lights in rear cross member INCLUDES reinforced continuously adjustable drawbar height via spindle HOT-DIP GALVANIZED CHASSIS/DRAWBAR Specification: * Gross vehicle weight: 21,000 kg * Payload: approx. 16,400 kg * Loading platform: approx. 7,200 x 2,540 mm * Unladen loading height: approx. 870 mm (wheel recesses) * Overall dimensions (LxWxH): approx. 8,700 x 2,550 x 3,710 mm * Galvanized 400 mm high solid steel front wall * Tapered rear loading platform * Wheel ramps with timber covering, laterally adjustable (approx. 3,100 x 760 mm) * Standard spring ramp assist (hydraulic ramp lift optional at extra charge) * Approx. 13° ramp angle * Reinforced stepless drawbar height adjustment for coupling heights unladen approx. 750 – 1,000 mm * DIN towing eye Ø 50 mm * Reinforced 12 t geared support winch with load and fast gear * Welded climbing strips on the ramp slope * 8 recessed 10 t lashing rings * 16 retractable 2 t folding lashing brackets in the outer frame * 2 telescopic folding supports at the rear of the vehicle * 2-line air brake system with ALB function * EBS 24 V braking system with EBS plug connection ISO 7638 (Note: The towing vehicle must be equipped with ABS/EBS connection) * Spring-actuated parking brake * Galvanized steel mudguards * Softwood planks on floor and ramps * Chassis frame and drawbar hot-dip galvanized by immersion * Tyres: 235/75 R17.5 (8 off) Kodpfx Acjkn N Sxs Aedw * Electrics: 15-pin, 24 V * Brake connection: 2 anti-swap coupling heads red/yellow ISO 1728 Your advantages: * Optimal corrosion protection due to hot-dip galvanizing by immersion * Safe loading and unloading thanks to telescopic rear supports and climbing strips on the ramp slope * Easy handling of steel ramps thanks to ramp assist * Excellent load securing options with standard lashing points * Reinforced stepless height-adjustable drawbar allows compatibility with different coupling heights of towing vehicles * Low tare weight = high payload --- Optional: * Hydraulic ramp lifting system *Stock vehicle – immediately available *Subject to prior sale *Ex works price

Stanje: novo, lastna masa: 927 kg, največja dovoljena obremenitev: 2.573 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.600 mm, širina tovornega prostora: 1.700 mm, višina nakladalnega prostora: 960 mm, prostornina tovornega prostora: 6,1 m³, barva: srebrn, gradbena višina: 2.100 mm, delovna širina: 2.300 mm, Reverse automation, hot-dip galvanization, mesh side extension / heavy-duty ramp / extremely robust construction / multi-functional application / LED lighting / electric jockey wheel, *IMMEDIATELY AVAILABLE* including mesh side extension / heavy-duty ramp / extremely robust build / multi-purpose usability / LED lighting / electric jockey wheel Kjdpfx Acou Hrl Do Aedw TECHNICAL DATA - Brand: Brian James - Model: General Plant - Vehicle type: Construction equipment trailer - Vehicle condition: New vehicle - First registration: None - TÜV/roadworthiness certificate: 2 years from initial registration - Internal dimensions (LxWxH): 360 x 170 x 96 cm - External dimensions (LxWxH): 529 x 230 x 210 cm - Load bed height: 48 cm - Permissible total weight: 3,500 kg - Unladen weight: 927 kg - Payload: 2,573 kg - Chassis: Low-loader (wheels next to bed) - Tyres: 185/70R13C - Suspension: ALKO rubber spring axle - Jockey wheel: Yes - 100km/h approval: Optional, retrofittable DESCRIPTION - Versatile all-purpose construction equipment trailer - Unique on the market - Every available option is flexibly attachable and detachable, allowing needs-based adjustments for almost any application - Socket functionality at all 4 corners for side panels, tarp frame, side extensions or front wall extensions - Steel side extension - 50% mesh side + 50% solid side panel, removable without tools - Including countersunk eccentric locks - Durable rubber strip seals extension tightly to the side wall - Trailer prepared for all options: huge upgrade potential – hydraulic tipping functions, winches, alternative ramps, extensions, etc. can be retrofitted at any time - Robust steel mudguards with non-slip perforated profile - Reinforced screen-print plywood floor, 18mm, anti-slip and waterproof - Very sturdy welded steel frame - Frame fully hot-dip galvanized by immersion bath - Chassis with additional longitudinal beams under the load deck - Sturdy ACME locking system: closes silently, loading ramps are secured by safety clamp locks, noise is dampened by rubber buffers - Continuous heavy-duty perforated steel ramp, galvanized, with spring assist - Very low chassis for reduced loading angle - Lashing points below and above the side walls (1000dAN/kg) TÜV certified - Side panel color: black - Maintenance-free axles and damping systems engineered for long journeys and heavy loads - Spare wheel easily accessible, mounted on the side - Reverse automation - ALKO overrun coupling and parking brake - Coupling head made of cast steel with integrated high-security ALKO lock - Very sturdy reinforced V-drawbar - 13-pole plug - Complete LED lighting: Very bright, durable, and reliable - LED lane position lights, rear - Reversing lights - Integrated rear fog lamp - Robust tail light protection - Automatic heavy-duty jockey wheel - 5-year chassis warranty Accessories can be retrofitted—enquiries welcome! - Digger bucket tray - Hydraulic tipping kit - Lashing straps - Tool box - Winch - And much more New vehicle with warranty and TÜV. We also offer tailored financing solutions! Descriptions and images are copyright protected!! Over 800 trailers immediately available on site! Over 30 years specialist dealership & repair workshop for Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix. Nationwide delivery within Germany available at extra charge! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt Errors, mistakes and interim

Stanje: novo, lastna masa: 750 kg, največja dovoljena obremenitev: 2.750 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 1.500 mm, višina nakladalnega prostora: 340 mm, prostornina tovornega prostora: 1,8 m³, barva: srebrn, gradbena višina: 1.670 mm, delovna širina: 2.100 mm, Reverse-automatic, hot-dip galvanized, * IMMEDIATELY AVAILABLE * Technical data: - Type: New vehicle with 2 years TÜV from initial registration - Availability: Immediately available!! - TÜV: 2 years - Floor: Wooden floor - Permissible total weight: 3,500 kg - Empty weight: 750 kg - Payload: 2,750 kg - Internal dimensions: 400 x 150 x 34 cm (L x W x H) - Overall external dimensions: 582 x 210 x 167 cm (L x W x H) - Loading edge height: 35 cm - Tyres: 195/50R13C steel rims - Brake: Yes - Jockey wheel: Yes, automatic - incl. vehicle documents (registration certificate) Equipment: - Brake: Yes - Number of axles: 2 - Floor: Wooden floor - Side panels: Steel side panels Kedpou Skxysfx Ac Asdw - Side panel height: 34 cm - Locks: Eccentric locks - Number of pallet spaces: 5 - Multi-purpose vehicle: No - Tilting / lowering function: Without - Hydraulic pump: - - Overrun device/brake: KNOTT - Frame/chassis: Welded steel frame - Galvanizing: Hot-dip galvanized - Drawbar: Continuous V-drawbar, square tube - Mudguards: Steel mudguards - Spare wheel: Optional, retrofittable - Bucket rest: Yes - Superstructures / extensions: No - Ramp shaft: No - Ramps/loading flap: Yes - Ramp type: Full-width tailgate - Ramp load capacity: - - Approach angle: approx. 12° - Supports: integrated in tailgate - Lashing eyes: 10 - Rear lighting: Incandescent, lamps recessed in rear frame - Side lighting: - - Lighting plug: 13-pin - Vehicle documents: COC papers Description: - Continuous, walkable steel mudguards - Very robust welded steel frame - Waterproof bonded 18 mm phenolic plywood floor - Loading surface height only approx. 35 cm - Maintenance-free rubber suspension axles from KNOTT - KNOTT overrun device and parking brake - Reverse-automatic - Very low chassis for minimal approach angle - V-drawbar with support for excavator bucket - Excavator bucket rest with lashing eyes - Sturdy steel side panels approx. 34 cm high - Galvanized chassis - Torsionally stiff longitudinal chassis frame for safe driving characteristics - Heavy-duty loading ramp, approx. 132 cm long, with gas strut assist - Sturdy rear support integrated into the loading ramp (automatic support when ramp is open) - 10x side lashing eyes, with ring eyelets - Rear lighting recessed in the rear frame - Front marker lights - Automatic jockey wheel with center mount - 13-pin plug - Reversing light - Integrated rear fog light New vehicle with warranty and TÜV. We are happy to offer you suitable financing options! Descriptions and images are copyright protected!! Over 800 trailers immediately available! We have been specialist dealers & offer repairs for over 30 years for Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix. Service center & workshop. Nationwide delivery in Germany available for an extra charge! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt Errors, omissions, and prior sale excepted.

Stanje: novo, lastna masa: 785 kg, največja dovoljena obremenitev: 2.715 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 1.800 mm, višina nakladalnega prostora: 300 mm, prostornina tovornega prostora: 2,2 m³, barva: srebrn, gradbena višina: 1.680 mm, delovna širina: 2.340 mm, Rear ramp / parabolic suspension / tapered rear / spare wheel / shovel holder, automatic reversing system, drive-on ramp, hot-dip galvanization, *IMMEDIATELY AVAILABLE incl. rear ramp / parabolic suspension / tapered rear / spare wheel / shovel holder Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATE!! - Permissible total weight: 3,500 kg - Unladen weight: 785 kg - Payload: 2,715 kg - Internal dimensions: 400 x 180 x 30 cm (L x W x H) - Overall external dimensions: 600 x 234 x 168 cm (L x W x H) - Loading edge height: 30 cm - Tires: 195/60R12C - Brakes: yes - Support wheel: yes, automatic - 100km/h approval: optional - incl. vehicle documents Superstructure: - Floor: 18 mm phenolic plywood - Side walls: Full steel sides - Side wall height: 30 cm - Chassis: KNOTT parabolic suspension - Tipping function: no - Hydraulics: - - Approach angle: approx. 12° - Overrun device & brake: KNOTT - Frame/chassis: welded, hot-dip galvanized steel frame - Extension: no - Lashing eyes: 10 outside and 8 inside - Supports: integrated in ramps - Ramps: ramp upright on shaft - Lighting plug: 13-pin - Approval: COC papers Standard equipment: - Lockable coupling head - Bucket holder - Spare wheel - Welded side wall/frame construction from sheet steel, hot-dip galvanized by immersion - reinforced V-drawbar, very stably bolted - 30 cm high side walls - Standing, fully hot-dip galvanized steel loading ramps - Very robust, welded steel frame - Heavy-duty walk-on steel mudguards - Complete frame hot-dip galvanized by immersion - Parabolic suspension axles (leaf spring suspension) - Beaver-tail rear / low ramp for access platforms and excavators - Multiple sturdy cross members for high point loads - Lashing rings mounted on the outer frame: 10 pieces (5 pairs), tensile force 1000 kg per ring - Lashing eyes mounted inside: 8 pieces (4 pairs) - Automatic reversing system - KNOTT overrun device and handbrake - Secure ramp locks - 13-pin connector - Reversing lights - Large-dimension safety lighting - Integrated rear fog lamp - Lighting recessed in rear frame - Rear side marker lights - Centrally positioned automatic support wheel - Approval documents: COC papers Retrofit accessories available on request: - 100km/h approval - Toolbox - Net hooks - Additional lashing eyes - Reversing lights - Lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing! Descriptions and images are protected by copyright!! Over 800 trailers in immediate stock! We have been specialist dealers and repair workshop for Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years - Delivery throughout Germany possible at extra cost! Trailer Center BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, mistakes, and prior sale excepted - Kdedpfou Ht Ndox Ac Aow

Stanje: novo, lastna masa: 828 kg, največja dovoljena obremenitev: 2.672 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.600 mm, širina tovornega prostora: 1.700 mm, višina nakladalnega prostora: 300 mm, prostornina tovornega prostora: 1,8 m³, barva: srebrn, gradbena višina: 2.100 mm, delovna širina: 2.300 mm, Automatic reversing system, hot-dip galvanization, heavy-duty ramp / extremely robust construction / multifunctional use / LED lighting / E-wheel, * AVAILABLE IMMEDIATELY * incl. heavy-duty ramp / extremely robust construction / multifunctional use / LED lighting / E-wheel TECHNICAL DATA - Brand: Brian James - Model: General Plant - Vehicle type: Construction machinery trailer - Vehicle condition: New vehicle - First registration: Without first registration - TÜV/MOT: 2 years from first registration - Internal dimensions (L x W x H): 360 x 170 x 30 cm - External dimensions (L x W x H): 529 x 230 x 210 cm - Load height: 48 cm - Perm. total weight: 3,500 kg - Unladen weight: 828 kg - Payload: 2,672 kg - Chassis: Low loader (wheels positioned beside the deck) - Tyres: 185/70R13C - Suspension: AL-KO rubber torsion axle - Jockey wheel: Yes Kdjdpfxsu Ht N Rj Ac Ajw - 100 km/h approval: Optional, can be retrofitted DESCRIPTION - Universal all-purpose construction machinery trailer - Unique on the market - Every available option can be flexibly mounted or removed, enabling demand-based customization for nearly any application - Stake pocket mounts on all 4 corners for drop sides, tarpaulin frames, side wall extensions or raised front panel - Vehicle prepared for all options even after purchase: huge retrofit potential—hydraulic tilt system, winches, alternative ramps, extensions, etc., can be added at any time - Robust steel mudguards with anti-slip perforated profile - Reinforced 18mm phenolic resin plywood floor, anti-slip and waterproof - Very stable welded steel frame - Frame complete hot-dip galvanized by immersion - Chassis with additional longitudinal members beneath the loading platform - Stable ACME locking system: silent closure, loading ramps secured with safety clamps, noise dampened by rubber buffer - Continuous heavy-duty perforated steel loading ramp, galvanized, with spring assist - Very low chassis for minimal approach angle - Lashing points bottom and top on sideboards (1,000 daN/kg) TÜV certified - Side panels colour: black - Maintenance-free axles and damping designed for long journeys and heavy loads - Spare wheel easily accessible, mounted on the sideboard - Automatic reversing mechanism - AL-KO overrun brake and parking brake - Cast steel coupling head with integrated high-security AL-KO lock - Reinforced, extremely stable V-drawbar - 13-pin plug - Complete LED lighting: extremely bright, durable, and reliable - LED marker lights at the rear - Reversing lights - Integrated rear fog light - Robust protection for rear lights - Automatic heavy-duty jockey wheel - 5 years chassis warranty Retrofittable accessories—enquiries welcome! - Excavator bucket rack - Tipping hydraulics - Side wall extensions - Lashing straps - Toolbox - Winch - Many more New vehicle with warranty and TÜV. Financing solutions available! Descriptions and images are copyright protected!! Over 800 trailers available from stock! We have been a specialist dealer & service workshop and deliver Germany-wide (extra charge) for over 30 years for Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix. Trailer Centre BAUMANN GmbH, Dinxperloer Str. 389, 46399 Bocholt - Subject to errors, changes and prior sale -

Stanje: novo, lastna masa: 800 kg, največja dovoljena obremenitev: 2.700 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 1.800 mm, višina nakladalnega prostora: 340 mm, prostornina tovornega prostora: 2,2 m³, barva: srebrn, gradbena višina: 1.670 mm, delovna širina: 2.400 mm, Reverse automatic mechanism, hot-dip galvanised, * IMMEDIATELY AVAILABLE * Technical Data: - Type: New vehicle with 2 years' TÜV from first registration - Availability: IMMEDIATE - TÜV: 2 years - Floor: Multiplex phenolic resin coating with anti-slip surface - Permissible total weight: 3,500 kg - Unladen weight: 800 kg - Payload: 2,700 kg - Internal dimensions: 400 x 180 x 34 cm (L x W x H) - Loading edge height: approx. 35 cm - Tyres: 195/50R13C steel rim - Brakes: yes - Jockey wheel: yes, automatic - incl. vehicle papers (registration documents) Equipment: - Continuous steel mudguards, walkable - Very robust welded steel chassis - Waterproof bonded 18mm phenolic plywood floor - Loading platform height only approx. 35 cm - Maintenance-free rubber torsion axles from KNOTT - KNOTT overrun brake and parking brake - Reverse automatic system - Extremely low chassis for a shallow approach angle - V-drawbar with holder for excavator bucket - Spare wheel bracket under the bucket holder (spare wheel not included) - Sturdy steel side walls, approx. 28 cm high - Galvanised frame - Heavy-duty loading ramp, approx. 132 cm long, with gas spring assist - Integrated rear supports in the ramp (automatic support when ramp is open) - 10x lashing eyes on both sides - Recessed lighting in the rear frame - Front marker lights - Jockey wheel with central mount - 13-pin plug - Reversing light - Integrated rear fog light - incl. delivery cost - incl. vehicle documents/COC papers We are happy to offer you tailored financing options! Descriptions and images are protected by copyright! Over 800 trailers immediately available! We have been your authorised dealer and repair workshop for over 30 years - Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix. Ksdou Hrh Sspfx Ac Aedw Delivery across Germany available for an additional charge! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt Errors, omissions and prior sale excepted.

Stanje: novo, lastna masa: 631 kg, največja dovoljena obremenitev: 2.869 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.000 mm, širina tovornega prostora: 1.620 mm, višina nakladalnega prostora: 230 mm, prostornina tovornega prostora: 1 m³, barva: srebrn, gradbena višina: 1.500 mm, delovna širina: 2.080 mm, Reverse automatics, drive-on ramp, hot-dip galvanization, 18 mm floor plate, parabolic suspension, rear ramp, sloped rear, *IMMEDIATELY AVAILABLE* incl. 18 mm floor plate / parabolic suspension / rear ramp / sloped rear Technical Data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATE! - Permissible total weight: 3,500 kg - Unladen weight: 631 kg - Payload: 2,869 kg - Internal dimensions: 300 x 162 x 23 cm (L x W x H) - Overall external dimensions: 482 x 208 x 150 cm (L x W x H) - Loading height: approx. 33 cm - Tyres: 195/60R12C - Brakes: yes - Jockey wheel: yes, automatic - 100 km/h approval: optional - incl. vehicle documents Bodywork: - Floor: 18 mm phenolic resin coated plywood - Side walls: solid steel side panels - Side wall height: 23 cm - Chassis: KNOTT parabolic suspension - Tipping function: no - Hydraulics: - - Ramp angle: approx. 22° - Overrun device & brake: KNOTT - Frame/chassis: welded steel frame, hot-dip galvanized - Superstructure: none - Lashing rings: 8 on the side edge (1000kg/daN) - Supports: integrated into ramps - Ramps: 1 upright on shaft, load capacity 1,500 kg - Lighting connector: 13-pin - Registration: COC documents Standard equipment: - Welded side wall/frame construction made of sheet steel, hot-dip galvanized by immersion bath – very sturdy bolted reinforced V-drawbar - Side walls 23 cm high - Hot-dip galvanized steel drive-on ramps, upright - Very robust welded steel frame - Heavy-duty walkable steel mudguards - Frame fully hot-dip galvanized by immersion bath - Parabolic spring axles (leaf springs) - Beaver-tail rear / low approach for work platforms and excavators - Numerous sturdy cross members for high point load capacity - Lashing rings mounted on outer frame, 8 pieces (4 pairs), tensile strength 1,000 kg per ring - Reverse automatics - KNOTT overrun device and parking brake - Robust ramp locks - 13-pin connector - Reversing lights - Large-dimensioned safety lighting - Integrated rear fog light - Lighting recessed in rear frame - Rear side position lights - Automatic central jockey wheel - Registration papers: COC documents Optional accessories (please inquire): - 100 km/h approval - Bucket tray - Spare wheel - Storage box - Net hooks - Additional lashing rings - Reversing lights - Lashing straps - and much more New vehicle with warranty and TÜV. We are happy to offer you suitable financing! Descriptions and images are protected by copyright!! Over 800 trailers immediately available in stock for you! We’ve been specialist dealers, repair shop and service providers for over 30 years for Brian James / Humbaur / Hapert / Unsinn / Cheval Liberté / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix. Workshop – Delivery possible throughout Germany at extra cost! Trailer Center BAUMANN GmbH Kdjdou Hripjpfx Ac Ajw Dinxperloer Str. 389 46399 Bocholt Errors, inaccuracies and prior sale subject to change.

Stanje: novo, lastna masa: 686 kg, največja dovoljena obremenitev: 2.814 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.200 mm, širina tovornega prostora: 1.700 mm, višina nakladalnega prostora: 200 mm, prostornina tovornega prostora: 1,1 m³, barva: srebrn, gradbena višina: 1.970 mm, delovna širina: 2.320 mm, Automatic reversing system, hot-dip galvanization, extremely robust design, perforated securing floor, LED lighting, E-wheel, shovel holder, * IMMEDIATE AVAILABILITY *\n\nExtremely robust design / perforated securing floor / LED lighting / E-wheel / shovel holder\n\nTECHNICAL DATA\n- Brand: Brian James\n- Model: Digger Plant 2\n- Vehicle type: Construction machinery trailer\n- Vehicle condition: New vehicle\n- First registration: None\n- TÜV/MOT: 2 years from first registration\n- Internal dimensions (LxWxH): 320 x 170 x 20 cm\n- External dimensions (LxWxH): 512 x 232 x 197 cm\n- Loading height: 40 cm\n- Permissible total weight: 3,500 kg\n- Unladen weight: 686 kg\n- Payload: 2,814 kg\n- Chassis: Low loader (wheels positioned beside the body)\n- Tyres: 195/60R12C\n- Suspension: AL-KO rubber spring axle\n- Jockey wheel: Yes\n- 100 km/h approval: Optional, retrofit possible\n\nDESCRIPTION\n- Robust steel mudguards with non-slip perforated profile\n- Reinforced perforated steel floor on the interior sides\n- 18 mm anti-slip, waterproof phenolic plywood floor in the middle\n- High-strength welded steel frame\n- Frame fully hot-dip galvanized\n- Chassis with two additional longitudinal beams underneath the load area\n- Perforated steel single ramps, galvanized, adjustable, L=1.62 m\n- Stable ACME locking system: closes silently, loading ramps secured in place by safety clamp locks, rubber buffer dampens noise\n- Very low chassis height for reduced climbing angle\n- Digger bucket holder\n- 10x lashing rings on the side panels (1,000 daN/kg) TÜV certified\n- Freedom to choose lashing points when securing loads using the perforated steel floor\n- Maintenance-free axles and damping systems designed for long distances and heavy loads\n- Spare wheel mounted for easy access on the side panel\n- Automatic reversing system\n- AL-KO overrun device and handbrake\n- Coupling head made of cast steel with integrated high-security AL-KO lock\n- Very stable reinforced V-drawbar\n- 13-pin plug\n- Complete LED lighting: extremely bright, durable, and reliable\n- Rear LED position lights\n- Reversing lights\n- Integrated rear fog light\n- Robust protection for rear lights\n- Heavy-duty jockey wheel\n- 5-year chassis warranty\n\nOptional accessories available – feel free to inquire!\n- TracStrap load securing system\n- Digger bucket cage\n- Lashing straps\n- Toolbox\n- Winch\n- and much more\n\nNew vehicle with warranty and TÜV. We are happy to offer suitable financing! Descriptions and images are protected by copyright! Over 800 trailers available immediately from stock!\n\nWe have been specialist dealers and a repair workshop for Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. Delivery available throughout Germany for an extra fee!\n\nTrailer Center BAUMANN GmbH\nDinxperloer Str. 389\n46399 Bocholt\n\nErrors, misprints, and prior sale excepted. Kdsdpfx Acsu Hrhfs Asw