Schwarzmüller Rh240 Jumbo Plateau Tieflader Ausziehbar > Neu < nakup rabljenega (4.028)

Stanje: novo, skupna masa: 36.700 kg, konfiguracija osi: 3 osi, Oprema: ABS, Schwarzmüller RH240 Jumbo flatbed semi-trailer low loader extendable telescopic – for building material and construction machinery transport - NEW - UNUSED - gross vehicle weight: 36,000 kg empty weight: 10,340 kg Internal length approx. 13,570 mm = Front platform length approx. 3,950 mm Rear platform length approx. 9,620 mm Platform width at lower deck approx. 2,540 mm Loading height in the low-bed area (unladen) approx. 830 mm Hedpfx Aju A Nilsg Iefg Frame: Extendable central frame welded construction Extension length 6,000 mm Pneumatic locking, operated from the trailer plus an additional position for a 40ft container in the low-bed area Reinforced design for building material transport, rated for 20 t on 5 m at the center of gravity and for machine transport up to 20 t Frame suitable for transporting timber construction parts L/W/H approx. 13,000/575/3,200 mm Reinforced frame for point loads at the front and rear with support block Reinforced outer frame in cranked platform, 6 mm Reinforced outer frame in the low-bed area, 6 mm Tapered crossmembers Sliding intermediate support approx. 300 mm (not removable), mechanically lockable, designed as stake pocket crossmember for box section stanchions 80x80 mm, as well as 1 pair of 5 t load securing rings integrated on the outside of the intermediate support Frame suitable for 2-axle tractor unit (SZM), saddle height (unladen) approx. 960 mm – 1,020 mm with air-suspended tractor Front: 3 pairs and rear: 10 pairs of 10 t lashing rings in the extendable outer frame, on both sides, can also be folded outward for oversize load securing 10 pairs of lashing mushrooms with welded-in round steel at the bottom outer frame Frame Equipment: 10 pairs of plug-in housings with reinforcement beams for box section stanchions 80x80 mm, on both sides of the outer frame 6 stake pocket crossmembers for box section stanchions 80x80 mm 24 steel box-section stanchions 80x80x5 mm, usable height approx. 2,000 mm, top with lashing holes for straps, hot-dip galvanized 3 pairs of container locks in the low-bed platform, retractable, for 1 x 20ft container 1 x 30ft container 1 x 40ft container when extended U-profile rail for ramp installation at rear frame end Support Device: Mechanical steel landing legs, 2 x 12 t 2 drop-down supports, both sides on rear frame Wheels: Tyres 205/65 R 17.5 Steel rims 6.00 x 17.5 Axles: SAF low loader axles with drum brakes Axle lift on 1st axle Axle spacing 1,310 + 1,410 mm Friction-steered SAF trailing axle, approx. 20° steering angle, electro-pneumatic reversing lock automatically activated in reverse gear Last axle steering Brake System/Suspension: Brake system manufacturer: Wabco Brake/air connections with 2 individual coupling heads yellow/red, EBS/ABS socket at front Air suspension with lifting/lowering device, total lift approx. 200 mm Automatic adjustment to programmed ride height from 15 km/h Assistance & Safety Systems: Standard reporting interval: every 15 minutes when ignition is on every 24 hours when ignition is off Axle load display via EBS-CANbus signal for display in cab (truck must be appropriately equipped) Wabco SmartBoard for data readout via display (mileage, axle load unit, brake diagnostics etc.) Floor: 35 mm larch wood flooring, impregnated on both sides, laid longitudinally with small gaps, over-wheel areas with steel chequer plate covering Front Wall: Fixed profiled steel front wall, approx. 2,700 mm high with 2 central supports 2 front corner posts

Stanje: rabljeno, največja dovoljena obremenitev: 25.660 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2022, Leto izdelave: 2022, Oprema: ABS, Schwarzmüller RH240 Jumbo flatbed semi-trailer low loader, daily registration Extendable and telescopic – ideal for the transport of construction materials and construction machinery Hedpsu A Nhnsfx Ag Isfg - As-new condition - Gross vehicle weight: 36,000 kg Unladen weight: 10,340 kg Internal length approx. 13,570 mm = Front platform length approx. 3,950 mm Rear platform length approx. 9,620 mm Platform width at lower deck approx. 2,540 mm Loading height in well (unladen) approx. 830 mm Frame: Extendable central frame welded construction Extension length 6,000 mm Pneumatically lockable, controlled at trailer + additional position for 40ft container in deep deck Reinforced version for transporting building materials, rated for 20 t on 5 m at the center of gravity and for construction machinery transport up to 20 t Frame suitable for transport of timber components L/W/H approx. 13,000/575/3,200 mm Reinforced frame for point loads front and rear with mounting block Reinforced outer frame at gooseneck platform 6 mm Reinforced outer frame in low deck 6 mm Tapered crossbeams Movable intermediate support approx. 300 mm (not removable), mechanically lockable, designed as stanchion crossmember for box-section stanchions 80x80 mm, and 1 pair of 5 t lash rings integrated externally in the intermediate support Frame for 2-axle tractor unit, coupling height unladen approx. 960 mm – 1,020 mm (air-suspended tractor) Front: 3 pairs and rear: 10 pairs of 10 t pull-out lashing rings in the outer frame, both sides, can also be folded outwards for oversized-width lashing 10 pairs of lashing mushrooms with welded round bar at lower outer frame Frame attachments: 10 pairs of socket housings with reinforcement for box-section stanchions 80x80 mm, both sides of the outer frame 6 stanchion crossmembers for box-section stanchions 80x80 mm 24 steel box-section stanchions 80x80x5 mm, usable height approx. 2,000 mm, with lashing holes for tie-down strap, hot-dip galvanised 3 pairs of container locks in the low deck platform, retractable, for: 1 x 20ft container 1 x 30ft container 1 x 40ft container when fully extended U-profile ramp rail at rear frame end Support equipment: Mechanical steel landing gear, 2 x 12 t 2 drop-down supports, rear, both sides of frame Wheels: Tyres: 205/65 R 17.5 Steel rims: 6.00 x 17.5 Axles: SAF low loader axles with drum brakes Axle lift on 1st axle Axle spacing 1,310 + 1,410 mm Friction-steered SAF trailing axle, approx. 20° steering angle, electropneumatic automatic reverse lock via reverse gear Last axle is steerable trailer axle Braking/Suspension: Brake system by Wabco Brake/air connectors with 2 single coupling heads yellow/red, EBS/ABS socket at front Air suspension with lifting and lowering device, total stroke approx. 200 mm Automatic levelling to programmed driving height from 15 km/h Assistance/Safety Systems: Standard reporting interval Every 15 minutes when ignition is on Every 24 hours when ignition is off Axle load indicator via EBS CAN bus signal, display in cab (truck must be appropriately enabled) Wabco SmartBoard for reading out data via display (mileage, axle module load, brake diagnosis, etc.) Floor: 35 mm larch timber floor, both sides impregnated, longitudinally laid with small gaps, over wheels with steel chequer plate covers Front wall: Fixed profiled steel front bulkhead, approx. 2,700 mm high with 2 center supports 2 front corner posts, integrated in front wall, bolted at front 2 lashing eyes each on top of the front

Stanje: novo, največja dovoljena obremenitev: 23.800 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete inventory of vehicles available immediately or at short notice on our website. Excerpt of equipment. Full equipment details available upon request. Weights: * Permissible gross weight: 24 t * Technical gross weight: 30 t Dimensions: * Approx. 2,100 mm = raised front platform including sloped frame, corners beveled * Approx. 5,350 mm = low-bed platform – flat loading area * Approx. 850 mm = rear ramp slope * Overall width: approx. 2,550 mm (or approx. 3,000 mm with extensions) * Loaded loading height: approx. 870 mm * When assembling tractor-trailer combinations, compliance with the legally permissible overall height and train length must be observed! Chassis/Frame: * Steel welded construction with front frame cranking and rear bevel * Ramp slope with excavator bucket recess in the center = rear depression between longitudinal beams, approx. 2,300 mm long * Integrated into the outer frame: 5 pairs of approx. 4 t lashing lugs (4x in the low-bed, 1x on the raised platform) * 7 pairs of recessed, pull-out lashing rings, approx. 10 t (4x low-bed, 1x on ramp slope, 2x on raised platform) * Standard ball bearing slewing ring Frame attachments: * Both sides of the low-bed platform equipped with extendable width extensions with approx. 50 mm softwood planks (track width of construction machinery being transported must not exceed outer frame width of approx. 2,550 mm) * 4 pairs of foldable approx. 10 t lashing rings, arrangement: 1 pair at the front of the raised platform inside longitudinal beams, 1 pair right and left in the excavator bucket recess at the far rear, 1 pair at the front of the raised platform before the frame cranking, inside beams, 1 pair at the rear of the low-bed before the ramp slope in the bucket recess, left + right Towing device: * Fixed tow bar with swivel coupling eye approx. 40 + 50 mm, cranked design, silent bushing mounting, tow bar retaining spring with tensioner * Truck coupling height from approx. 830 mm to approx. 1,030 mm * Tow bar length approx. 1,800 mm Support equipment: * 2 automatic folding support legs at the rear Axles: * SAF air-suspension low-loader axles with drum brakes, load capacity 11 t/axle, S-cam brakes approx. 300/200 mm, automatic brake adjusters Wheels: * 12 tires, size 235/75 R 17.5, 141J, brand as per factory selection Brake system/Suspension: * Brake system according to ECE regulation R13 * Two-line air brake system Hfjdpfxsy Aug Rs Ag Iog * Manufacturer Wabco, EBS system 4S3M, 1st and 2nd axle equipped with sensors * RSS/RSP Stability Program * Spring-loaded parking brake on 2nd and 3rd axles * Brake/air connection lines with 2 separate couplings (yellow/red) * EBS/ABS connection cable * Air suspension with lift/lowering function (rear axles only), automatic ride height adjustment from 15 km/h (RTR), with axle bump stop on the front axle Assistance/Safety systems: * SWIT – Schwarzmüller Intelligent Telematics * Axle load display via EBS CAN bus signal for display in the driver’s cab (truck must be prepared accordingly, not a calibrated scale) * Tire pressure monitoring per ECE regulation 141, with pressure sensors in the wheels, for display in the cab (display, etc. must be present in the tractor unit) Floor: * Approx. 50 mm softwood flooring, impregnated, protruding approx. 5–10 mm above the top edge of the frame * Steel chequer plate covers over the wheels Ramps: * 2 foldable, one-piece lightweight steel loading ramps, approx. 2,800 mm long, approx. 750 mm wide, with 35 mm

Stanje: novo, največja dovoljena obremenitev: 30.860 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website. Excerpts from the equipment specifications. Full equipment details available upon request. Chassis: * Steel welded construction with front frame cranking, chamfered front corners, and rear chamfer, drive-up slope with centrally located excavator bucket recess = depression at the rear between the longitudinal beams, approx. 2,300 mm long * Integrated in the outer frame: 4 pairs of approx. 4 t lashing brackets, 7 pairs of recessed, retractable approx. 10 t lashing rings (2x on the raised platform, 1x at the front cranked slope, 3x in the low bed between the wheel recesses, 1x on the drive-up slope) 2 Pairs of Wheel Recesses: * 1 pair of wheel recesses, approx. 2,300/1,270 x 400 mm (L1/L2 x D), located at the front after the cranking, including one-piece drive-over aluminium cover, for max. surface load approx. 11,650 daN each * 1 pair of wheel recesses, approx. 1,390/590 x 270 mm (L1/L2 x D), between 3rd and 4th axle, including one-piece drive-over aluminium cover, suitable for transporting wheel loaders with wheelbase approx. 2,700 - 3,600 mm, wheel diameter approx. 1,485 – 1,740 mm, maximum rear wheel loader overhang 2,220 mm * Width between the wheel recesses approx. 1,255 mm (outer/outer beam spacing) Frame Attachments: * 5 pairs of stake pockets in the outer frame for rectangular tube stakes approx. 100 x 50 x 5 mm (3x in the low-bed, 2x on the raised platform) * Low-bed platform with extendable width extensions on both sides with softwood planks approx. 50 mm (the track width of machines to be transported must not exceed the external frame width of approx. 2,550 mm) * 4 pairs of foldable approx. 10 t lashing rings, distributed as follows: 1 pair at the front on the raised platform inside the longitudinal beams, 1 pair at the very rear in the excavator bucket recess left and right, 1 pair at the front on the raised platform before the cranking inside the longitudinal beams, 1 pair at the rear of the low-bed before the drive-up slope in the excavator bucket recess left and right Towing Device: * Fixed towing drawbar with approx. 50 mm heavy-duty towing eye, cranked design, silent bushing mounting, drawbar holding spring with tensioner * Truck coupling height from approx. 775 mm to 975 mm * Drawbar length approx. 1,800 mm Support Device: * 2 hydraulic rear supports, operated individually, controls housed in a separate stainless-steel box Hodpfx Agsy Auhns Iofg Axles: * SAF air suspension low-bed axles with drum brakes, load capacity approx. 11 t/axle, S-cam brake approx. 300/200 mm, automatic brake adjusters Wheels: * 16 tyres 245/70 R 17.5, 146/146F, brand Conti HTR2 (tyre load capacity approx. 12 t/axle) Brake System/Suspension: * Brake system per ECE regulation R13, two-line pneumatic system * Brake system manufacturer Wabco EBS system 4S3M, 1st and 3rd axles sensed * RSS/RSP – stability control programme * Spring-loaded parking brake on the 3rd and 4th axles * Aluminium air tanks for total weight 44 t * Brake/air connection lines with two separate coupling heads, yellow/red * EBS/ABS connection cable * Tension rubber as holder for EBS and electrical connectors * Air suspension with lift and lowering device, operated separately at front and rear * Automatic leveling to programmed driving height from 15 km/h Assistance/safety systems: * SWIT – Schwarzmüller Intelligent Telematics Floor: * Softwood floor, approx. 50 mm, impreg

Stanje: rabljeno, največja dovoljena obremenitev: 26.827 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2025, naslednji pregled (TÜV): 04/2026, dolžina tovornega prostora: 16.240 mm, skupna širina: 2.550 mm, Leto izdelave: 2025, Oprema: ABS, Kässbohrer KSLA RJ Mega Jumbo Low Loader with wheel wells and excavator trough - Hardly used Immediately Available Including winch TECHNICAL DATA: * Fifth-wheel height (H5): approx. 950 mm * Rear swing door: 2,300 mm * Overall length (L): 13,190 mm * Gooseneck length (Gl): 3,950 mm * Platform length (Pl): 9,240 mm * Extension (Pe): 3,500 mm * Locking position: 500 mm * Platform height (Ph): 770 mm * Wheelbase (Wb): 7,800 mm * Axle distance (A): 2,260 mm * Axle load: 24,000 kg * Axles: 12 tons technical load capacity (10 tons permissible load capacity) BPW * Axles with drum brakes * Axle load: 8 tons load capacity * Kingpin load capacity: approx. 15,000 kg * Unladen weight ±3%: 12,173 kg * Overall width (W): 2,550 mm + 600 mm (with side extensions) * Sliding platform: Not included * Gross weight (at 80 km/h): 39,000 kg * Gross weight (at 60 km/h): 42,900 kg RUNNING GEAR: * Number of axles: 3 units * Steering type: 2 fixed axles at the front, 1 trailing axle at the rear * Lift axle: Overload-dependent manual axle lift system on 1st axle * Lift axle control: Manual * Wabco brake system * Tyres: 12 x 205/65 R17.5 * 1 x spare wheel bracket on the front wall * Air suspension, 1 x load gauge included to display pressure on the axle aggregate * NATO socket CHASSIS: Hsdpjxy Ddkjfx Ag Isfg * S700 MC * Gooseneck with 90° vertical corners * 45 mm hardwood floor and steel floor with drip structure above wheels only * Galvanised extensions 8 x 2 for widening the platform by up to 300 mm * Jost landing gear 50 tons * Foldable supports at the rear, 45 tons * 2 pairs of wheel recesses for transporting vehicles with tyres * Wheel well bridge to cover wheel wells RAMP: * Ramp capacity: approx. 40 tons * Suitable for hydraulic folding and shifting operations * Wooden floor, 40 mm thick, length 3,070 mm, width 850 mm, height 3,715 mm in closed position, ramp angle 14°, capacity 40 tons * Rear ramp safety: ramp safety tension chain included LOAD SECURING: * Lashing rings: 2 x 2 x 5,000 daN load capacity, 1 x 2 x 10,000 daN lashing rings on gooseneck, 3 x 2 x 5,000 daN, 4 x 2 x 10,000 daN lashing rings on external platform, 2 x 2 lashing rings with 8,000 daN capacity under the outer frame, 4 x 2 lashing rings with 6,000 daN capacity at the deck area included * Stake pockets: 5 x 2 stake pockets, 52 mm x 102 mm included * 6 x container lock housings and 4 x twist-lock container locks for transporting 1 x 20 ft or 1 x 30 ft containers included * Gooseneck panels: 1 x steel front wall panel (450 mm x 2,550 mm), 2 x aluminium side walls (360 mm x 1,500 mm), 1 x aluminium rear wall (360 mm x 2,550 mm) * Plug-in stakes: 8 x 2 units, 50 mm x 100 mm ACCESSORIES: * 1 x PVC-coated steel toolbox (with single lid), size 750 x 400 x 360 mm (H x D x W) * 1 x beacon * 1 x work light on underrun protection * Wide load boards with LED lighting, 2 x 2 units, 423 mm x 423 mm * Storage box on gooseneck (600 mm x 830 mm x 2,310 mm) * Timber planks for wide load transport * Colour of chassis: RAL 3020 Traffic Red For further information please do not hesitate to contact us.

Stanje: novo, lastna masa: 4.300 kg, največja dovoljena obremenitev: 13.700 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.100 mm, širina tovornega prostora: 2.480 mm, vzmetenje: zrak, velikost pnevmatike: 275/70R22,5, Oprema: ABS, Schwarzmüller Jumbo construction material trailer | BPW axles with disc brakes | Pallet box, 2x stainless steel toolboxes | Rear storage compartment 600x400x2,900 mm | Side wall height 1.00 m, front wall height 1.40 m | Loading dimensions: 7.10 m x 2.48 m | XLite aluminum rims | Tires: 275/70R22.5 twin tires | Plastic tarpaulin with rubber straps | Aluminum storage tray and front entry step | Subject to errors, input mistakes, and prior sale. Hfjdpfx Agjtuwbps Isg

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, New 750 kg Low-Loader Car Trailer – Top Quality For sale is a brand-new car trailer, ideal for versatile use in private or commercial sectors (transport, construction, gardening, etc.). 🔧 Technical Specifications: Hjdey Dru Iopfx Ag Iofg Type: Low-loader Permissible Total Weight: 750 kg Payload: approx. 630 kg Axles: 1 Braked: No Tyres: 13 inch Internal Dimensions (LxWxH): approx. 202 x 114 x 30 cm ✅ Features & Equipment: Robust, fully galvanized steel construction (corrosion-resistant) Sturdy frame design with reinforced drawbar Rubber suspension axle for smooth driving performance Side panels made of solid steel – durable and resilient Lashing eyes for secure load securing Fittings for tarpaulin / bows present Protected lighting 👍 Advantages: Brand new (unused) Low-maintenance and durable Compact dimensions – also suitable for smaller vehicles Versatile applications (furniture, building materials, green waste, etc.) 📦 Availability: Delivery possible Available within a few weeks 📍 Collection & Delivery: Collection in Buchholz (Aller) possible Nationwide delivery within Germany available on request 💰 Note: The quoted price includes the basic trailer in standard configuration. Accessories and additional equipment (e.g., superstructures, extensions, etc.) are available separately on request. Your Team Globaltainer GmbH

Stanje: rabljeno, lastna masa: 5.100 kg, največja dovoljena obremenitev: 12.900 kg, prva registracija: 03/2014, naslednji pregled (TÜV): 04/2025, skupna dolžina: −1 mm, skupna širina: 25.500 mm, vzmetenje: jeklo-zrak, velikost pnevmatike: 245 / 70 R 17.5 / 8mm, velikost sprednje pnevmatike: 245 / 70 R 17.5 / 8mm, obratovalna teža: 18.000 kg,

Stanje: rabljeno, največja dovoljena obremenitev: 17.640 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2015, naslednji pregled (TÜV): 04/2026, dolžina tovornega prostora: 8.355 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 3.600 mm, Leto izdelave: 2015, Oprema: ABS, Good condition Hodpfx Asy Dmuvsg Ijfg

Stanje: rabljeno, največja dovoljena obremenitev: 30.250 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2014, naslednji pregled (TÜV): 06/2025, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, skupna širina: 2.550 mm, Leto izdelave: 2014, Oprema: ABS, Schwarzmüller Platform Flatbed Semi-Trailer with Lift Axle Permissible total weight: 36,000 kg Unladen weight: 5,750 kg Payload: 30,250 kg SAF axles 1st axle lift axle Air suspension Disc brakes Side underrun protection right, left, and rear 2x storage compartments right 1x storage compartment left Rear rubber buffer 2x extendable oversize load signs front 2x extendable oversize load signs rear 2x crank support legs, operable from the right EBS (Electronic Braking System) ABS (Anti-lock Braking System) Perforated outer frame with approx. 100 mm hole spacing Wheelbase: approx. 6,350 + 1,310 + 1,310 mm External dimensions LxW: approx. 13,840 x 2,550 mm Loading area LxW: approx. 13,620 x 2,480 mm Front wall height: approx. 2,400 mm Loading height: approx. 1,250 mm Tyres: 385/65R22.5 Tread depth left front: 4 mm Tread depth left centre: 16 mm Tread depth left rear: 8 mm Tread depth right front: 5 mm Tread depth right centre: 15 mm Tread depth right rear: 10 mm Additional Features: Reinforced steel frame welded construction for point load 20 t over 4 m at centre of gravity, frame for ASH unladen 1,090–1,190 mm with air-suspended tractor unit, interchangeable 2" king pin (EC installation dimensions, corner spacing 2,040 mm) Perforated outer frame with approx. 100 mm hole spacing, elongated hole 40/25 mm according to DIN EN 12640 Air suspension with lifting and lowering device (approx. +120/-80 mm) Automatic ride height adjustment from 15 km/h Hfodpfx Agewqyrho Iog SAF "Intradisc-plus-Integral" air suspension unit with low-maintenance disc brakes, Ø 430 mm, 3 x 9 t rigid axles, wheelbase 2 x 1,310 mm Front axle automatically liftable = 2-side lift (1 x 96307) raises and lowers automatically based on weight (lifting the axle increases the loading or overall height by approx. 50 mm) with forced lowering including integrated speed-restricted starting aid for pushbutton operation in cab (without pushbutton fitted) 1 odometer (ECO-meter) (KIT no. 10801, with hubcap KIT no.: 52917) (on 2nd axle front right) Mechanical 2 x 12 t support winches, one-sided operation and load distribution mechanism Two-line brake system EBS-E – electronic braking system (Wabco 2S2M = one axle, 2nd axle monitored) RSS – roll stability support program Spring-loaded parking brake on 2 axles Aluminium air tank, unpainted 27 mm phenolic plywood flooring, flush with outer frame 2 steel hat profile rails over longitudinal beams, additional 12 mm phenolic overfloor, bevelled to outer frame Fixed aluminium hollow profile front wall 2,400 mm high with 2 centre supports

Stanje: rabljeno, lastna masa: 6.090 kg, največja dovoljena obremenitev: 23.910 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2017, naslednji pregled (TÜV): 06/2026, dolžina tovornega prostora: 8.000 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 940 mm, vzmetenje: zrak, velikost pnevmatike: 245/70R17.5, barva: rumena, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Lokacija vozila: v prihodu / v tranzitu, 3 osi, SAF osi, vrtljiva prikolica, listnato vzmetenje, ABS (protiblokirni sistem), pritrditvene zanke, mehanske rampe, zadnje opore, stranska alu-zaščita, dvojna kolesa. Nadgradnja: 3-osna polprikolica z nizkim ležiščem z mehanskimi rampami. Dolžina ramp 2.800 mm, zadnji naklon ca. 1.000 mm. 3x10t SAF osi, bobnaste zavore, 50 mm vlečna ušesa. Vse informacije brez garancije, saj je vozilo v prihodu! Podatki o dodatni opremi brez garancije, spremembe, vmesna prodaja in napake so pridržane! Hfodpfxjy N D Ece Ag Iog

Stanje: rabljeno, skupna masa: 34.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2008, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5, Oprema: ABS, | Schwarzmüller plato priklopnik | BPW osi z disk zavorami | Leto izdelave 2008 | Nosilec rezervnega kolesa | Škatla za palete | Škatla za orodje | Pnevmatske gume: 385/65 R22,5 | | Pridržujemo si pravico do napak, vnosnih napak in predhodne prodaje. Hfedexx Nlwjpfx Ag Ieg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: VAVJS1339PH522406, lastna masa: 8.520 kg, največja dovoljena obremenitev: 30.480 kg, skupna masa: 39.000 kg, prva registracija: 01/2024, dolžina tovornega prostora: 13.500 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R22.5, barva: rumena, Leto izdelave: 2024, Oprema: ABS, LOCATION: 73230 Kirchheim unter Teck - 3-AXLE BUILDING MATERIAL PLATFORM SEMI-TRAILER RH230 - forced-steered Vehicle identification number: VAVJS1339PH522406 Mileage: 7,700 km - Weights Gross weight (technical): 39 t Axle group load (technical): 27 t Kingpin load (technical): 12 t DIMENSIONS Internal length approx. 13,500 mm Internal width approx. 2,480 mm Overall width max. 2,550 mm Loading height front approx. 230 mm above ASH = approx. 1,360 mm Coupling height unladen approx. 1,130 mm FRAME - welded steel frame construction - reinforced for 20 t load concentration over 4 m loading length - frame height at front approx. 230 mm - interchangeable 2" kingpin - frame for unladen fifth wheel height approx. 1,120 mm to 1,200 mm with air-suspended tractor unit - 4 mm perforated outer frame with hole spacing approx. 100 mm, elongated hole 50/30 mm, for lashing, 3.5 t per lashing point - 10 pairs of 5 t lashing rings, recessed in floor, foldable, also can be folded outward - 8 pairs of box section inserts with plug-in fixtures for 80x80 mm stanchions, both sides of the outer frame - 6 box section inserts with plug-in fixtures for 80x80 mm stanchions, across entire width, max. tensile force 2000 daN AXLES - BPW EcoDisc axles with disc brakes ø430 mm (22.5'' disc) - Load capacity 9 t/axle, on-road version - 1st axle rigid - 2nd and 3rd axle with bogie installation for forced steering Hedpfx Aexq S H Iog Iofg STEERING - Forced steering "Tridec TR" on two turntable-steered axles for heavy-duty use - Self-acting forced steering, front fifth wheel turntable with steering wedge - Transmission via two steering rods, axle mounting at rear with bogie - Central lubrication points for steering at front fifth wheel turntable and rear bogie - Axle lift on 1st axle, raises and lowers automatically depending on load, start-off aid with speed limitation BRAKING SYSTEM / SUSPENSION - EBS system 2S2M, one axle sensing - RSS/RSP stability program - Spring brake parking brake on 2 axles - Aluminium air reservoirs - Brake/air connections with Quattromatic quick coupling - EBS/ABS socket at front - Air suspension with lift/lower function, total stroke approx. 200 mm - Automatic adjustment to programmed ride height from 15 km/h ASSISTANCE / SAFETY SYSTEMS - Axle load display via EBS CAN bus signal for display in the driver's cab - Wabco SmartBoard for reading data via display (mileage, axle group load, brake diagnosis, etc.) FLOOR - 27 mm phenolic plywood floor with steel hat-profile rails over the longitudinal members - Floor load capacity 7,200 kg forklift axle load ACCESSORIES / GENERAL - Aluminium forklift guard rail bolted both sides to the outer frame - Aluminium forklift guard rail at rear crosswise - Closed SPECIAL steel toolbox by Schoch, black coated, approx. 3,340 mm long, 2,480 mm wide, 500 mm high, for loads up to approx. 1 t, asymmetrical with doors on both sides - Galvanised steel toolbox / lid painted in single colour - 8 removable hardwood cross beams approx. 100/100 mm, with steel edging, can be fixed in plug-in fixtures in the outer frame Very good condition, German registration papers, immediately available.

Stanje: novo, največja dovoljena obremenitev: 32.630 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.500 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.200 mm, prostornina tovornega prostora: 57 m³, skupna širina: 2.550 mm, skupna višina: 3.800 mm, Leto izdelave: 2026, Oprema: ABS, SCHWARZMÜLLER 3-Axle GRAIN Tipping Trailer 57m³ 6370kg!! NEW VEHICLE!! Cargo Bulk material, pallet and grain transport Weights Gross weight (technical): 39 t Axle load (technical): 27 t Fifth wheel load (technical): 12 t Unladen weight: 6370kg Dimensions Internal length: approx. 10,500 mm Internal width: approx. 2,470 mm Internal height: approx. 2,200 mm Loading volume: approx. 57 m³ Overall height unladen: approx. 3,800 mm Chassis Steel frame welded construction with rear tipping shaft, low superstructure height (frame height approx. 280 mm) 2" kingpin Frame for coupling height approx. 1,170 mm - 1,250 mm Mechanical steel landing legs, 2 x 12 t, single-sided operation (right-hand side), thrust compensation Axles SAF Intradisc-B9 axles with disc brakes ø430 mm (22.5" disc), axle load 9 t/axle, on-road configuration Axle spacing: 1,310 + 1,310 mm Front axle liftable automatically (raises/lowers depending on weight), additional forced lowering including integrated start assist switch in driver’s cab + operation '3 x brake', socket: PIN 12 Wheels 6 tires 385/65 R 22.5, 160K 6 x aluminium rims 11.75 x 22.5, offset 120 mm, polished, brand per factory choice Brake System/Suspension Brake system per EU directive 71/320 ECE R13, twin-line compressed air brake Knorr brand brake system EBS system 2S2M RSS - Stability control program Spring-loaded parking brake Aluminium air tanks Brake/air connectors: 2 coupling heads EBS/ABS socket at front Electronic air suspension with automatic lowering, inductive switch + lowering lock rotary switch, plus with lift/lower function, cab operation via CAN bus signal + display (TIM) on the trailer Assistance/Safety Systems Axle load indicator via EBS CAN bus signal for display in cab TIM - Trailer Information Module by Knorr, display on chassis SWIT - Schwarzmüller Intelligent Telematics, "BASIC" package Tire pressure monitoring per ECE regulation 141, pressure sensors in wheels Tipping body Aluminium corner body in pallet version = smooth inside and outside, upright front and rear walls Front wall 4 mm with reinforcements Access steps inside tipping body Side walls with hollow profiles 30/3/2 mm and upper stabilizing frame Rear crossbeam = pivoting door stop bar incl. control rod Uniform fixed bearing over front wall and rear crossbeam Floor plate 8 mm with close cross-ribbing Side walls welded tight inside Combination rear wall 4 mm = double doors, divided in the middle with rubber seal, 1 external stainless steel rotary latch and holder for open doors, also with pendulum frame with rubber seal Automatic-mechanical 4-hook central locking incl. closing option for sliding discharge One grain slider approx. 400/400 mm per door leaf with side metering lever and splash guard Slider plate stainless steel, unpainted Additional joint, free swinging Tension screws for additional security Hydraulics 1-pipe system with fixed-side screw coupling HDK BG6 High-pressure front ram for rear tipping, tipping angle approx. 48° Tarpaulin Plastic rolling tarp incl. aluminium slat, hand crank + bracket on standing platform Integrated tube in center of tarp ø 60 mm with keder fastening to upper belt (without customs seal) 3 stop brackets and locking for rolled tarp Front and rear with tarp hooks and zigzag lacing Hedjyv S Niepfx Ag Ijfg 4 pieces of removable or swiveling crossbars

Stanje: rabljeno, lastna masa: 6.580 kg, največja dovoljena obremenitev: 27.420 kg, skupna masa: 34.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2011, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5, Oprema: ABS, | Schwarzmüller plato priklopnik | BPW osi z disk zavorami | Letnik 2011 | Nosilec rezervnega kolesa | Škatla za orodje | Pnevmatske gume: 385/65 R22,5 | Pridržujemo si pravico do napak in predhodne prodaje. Hsdpfx Agex Uqxmo Isfg

Stanje: rabljeno, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2022, dolžina tovornega prostora: 12.400 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, Leto izdelave: 2022, Oprema: ABS, 4-AXLE LOW LOADER SEMITRAILER WITH CRANKED PLATFORM Tractor unit data and equipment: 3-axle tractor unit Please check saddle height under the "Dimensions" section! No modifications to the tractor unit required Please note: 5,000 mm = maximum distance from front of tractor unit to center of fifth wheel coupling 1,730 mm = minimum clear front distance from fifth wheel coupling center 2,230 mm = maximum rear turning radius Tractor unit suspension type: air suspension Gross train weight (permitted): 40 t Gross weight (technical): 58 t Axle unit load (technical): 40 t Saddle load (technical): 18 t Approx. 3,500 mm = front cranked platform Approx. 7,970 mm = low bed platform – level loading area Approx. 730 mm = rear ramp slope Overall width approx. 2,550 mm (approx. 3,000 mm with extensions) Loaded loading height approx. 870 mm Unloaded loading height approx. 900 mm With unloaded saddle height approx. 1,250 mm For combined vehicle operation, please observe legal total height and total train length limits! Welded steel construction with front inclined frame crank and rear incline (without central excavator shovel recess) 5 pairs of lashing pockets in the low bed for box stanchions 100 x 50 mm 4 pairs of lashing eyes on the outer frame 2 pairs of 5t lashing rings under the outer frame – between the axles 4 pairs of recessed 4t lashing rings on the cranked platform 7 pairs of recessed, retractable 5t lashing rings (10t technical pull force) in the low bed + 1 pair folding, between 2nd and 3rd axle 1 pair of recessed, retractable 10t lashing rings on front crank slope Pair of recessed, foldable 10t lashing rings on the inside of side member after 2nd axle 1 pair of recessed, foldable 10t lashing rings on the inside of side member after front crank Interchangeable 2" king pin 5 pairs of steel box stanchions 100x50x5 mm, usable height approx. 1,000 mm, hot-dip galvanized, stanchion securing by pressure actuation # Permissible stanchion load 1,000 kg per stanchion with load application point 500 mm above ground Both sides of the low bed platform with extendable widening elements with 50 mm softwood planking (track width of the construction machines to be transported must not exceed outer frame width of 2,550 mm) Mechanical steel support winches, 2 x 12 t, single-sided operation (right), load compensation, manufacturer at factory’s discretion 2 hydraulic supports at rear – individually operable, controls housed in a separate stainless steel box Hjdpfx Asu Uzv Ejg Ijfg AF air-suspension low loader axles with drum brakes, load capacity 11 t/axle, S-cam brake 300/200 mm, automatic brake slack adjusters Axle spacing 1,310 + 1,310 + 1,310 mm 3rd and 4th axle as stub axle/friction-steered SAF trailing axles, approx. 20° steering angle, electro-pneumatically controlled reverse lock automatically activated via reverse gear, also switchable from the cab and with release valve on the trailer Start-assist on 1st axle = speed-limited pressure relief, unloadable when loaded, actuation via button in cab Mechanical odometer mounted on 2nd axle, right side in driving direction 16 pcs. Tires 245/70 R 17.5, 146/146F (tire load capacity 12t/axle) 16 pcs. Steel rims 6.75 x 17.5, with offset, silver (tire load capacity 12t/axle) 1 pc. Tire 245/70 R 17.5, 146/146F, make: Conti HTR2 (tire load capacity 12t/axle) 1 pc. Steel rim 6.75 x 17.5, with offset, silver Tread depth: 10-11 mm WIT – Schwarzmüller Intelligent Telematics, "LOCAL TRAC" package ... further details on request! Export pla

Stanje: rabljeno, največja dovoljena obremenitev: 23.360 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2008, Leto izdelave: 2008, Oprema: ABS, Hidravlične preklopne dvojne rampe, razširljive Hfjdpfjx Sb D Iex Ag Ijg Stanje: rjave lise, sicer dobro

Stanje: rabljeno, največja dovoljena obremenitev: 14.100 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 04/2015, Leto izdelave: 2015, Oprema: ABS, Jumbo prikolica Schwarzmüller s platformo in stranskimi deskami Hfjdpfxex Sbwzj Ag Ieg

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 146 kg, največja dovoljena obremenitev: 604 kg, skupna masa: 750 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 2.640 mm, širina tovornega prostora: 1.260 mm, višina nakladalnega prostora: 300 mm, Leto izdelave: 2026, Scope of delivery: 1x Martz car trailer 264x126cm with tipping drawbar and jockey wheel, 750kg Description: The trailer features a V-type tipping drawbar that ensures excellent stability during transit. The chassis comprises bent profiles made of galvanized steel sheet, securely bolted together. The running gear is based on a torsion axle from a renowned manufacturer, providing independent, sprung suspension on a torsion bar. Fitted tires: 155/70 R13. The side panels are constructed from galvanized steel sheet. The rear tailgate can be opened easily and quickly. Load platform: High-quality, waterproof, anti-slip phenolic plywood, 9mm thick. Technical Specifications: - Tipping drawbar - Jockey wheel Gross weight: 750kg Unladen weight: 146kg Payload: 604kg Load bed length: 2640mm Load bed width: 1260mm Overall width: 1690mm Overall length: 3540mm Overall height: 800mm Side panel height: 300mm Side panel material: Galvanized steel Manufacturer: Martz Trailer type: Box trailer Suspension type: Rubber sprung axle Drawbar type: V-drawbar Floor: Phenolic plywood floor (9mm thick) Wheels: 155/70 R13 Frame type: Bolted Frame material: Steel Application: Gardening, DIY, moving/transporting furniture, goods transport, and more. The Martz car trailer is the reliable choice for all your transport needs. Hfjdpfx Ajxpimpeg Iog We are happy to send you the vehicle documents in advance and free of charge if you choose 'collection in person'!

Stanje: rabljeno, največja dovoljena obremenitev: 30.380 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2011, Oprema: ABS, Vehicle Identification No.: VAVX99448BH301318 Including ALU ramps – 2,800 mm long, 400 mm wide Unladen weight: 9,620 kg German MOT due Gooseneck: 4,000 mm Low-bed: Length: 8,620 mm Width: 2,550 mm Loading height: 930 mm Removable rails Support legs Width extension lighting Max. fifth wheel load at front: 12,000 kg Swing clearance radius: front 2,100 mm - rear 1,900 mm Axle loads (technical): 4 x 7,000 kg BPW Eco Plus axles with drum brakes Axle 1 = liftable Axles 3 + 4 = trailing steered 2 x toolboxes Tyres: 245/70 R 17.5 Hsdjtt U D Dspfx Ag Iofg Changes, prior sale and errors excepted. The description serves for general identification of the vehicle and does not constitute a warranty in the legal sense of sales law. The description in the purchase contract is binding. Our offer is generally without new technical inspection (TÜV). If a new TÜV inspection is required, we are happy to provide an offer from our partner workshops! The vehicle may be covered with advertising stickers and/or inscriptions. Our general terms and conditions of delivery and payment apply.

Stanje: novo, največja dovoljena obremenitev: 33.440 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.000 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 2.900 mm, skupna širina: 2.550 mm, skupna višina: 3.900 mm, Oprema: ABS, SCHWARZMÜLLER 3-Axle Timber/Stake Semi-Trailer - New Vehicle IMMEDIATE AVAILABILITY!! Tractor Unit Data and Equipment - 4,500 mm maximum distance from tractor unit front edge to king pin center - 2,240 mm minimum clear front space from king pin center - 1,900 mm max. rear swing radius - GCVW (Gross Combination Weight, permitted): 44 t for short and long haul, or with special permit - GVW (Technical): 39 t - Axle group load (technical): 27 t - King pin load (technical): 12 t Dimensions - Frame length: approx. 13,000 mm - Overall width: max. 2,550 mm - Loading height front/rear: approx. 1,340 mm - Trailer in level position at approx. 1,150 mm coupling height - Overall loading height: approx. 1,510 mm Construction - Welded steel frame construction - Lightweight high-strength fine-grain steel chassis - Straight frame design, all stanchion holders mounted on the chassis - Frame height at front: approx. 190 mm (without stanchion holders) - Replaceable 2" king pin - Chassis for coupling height (unloaded) approx. 1,150 to 1,250 mm with air suspension tractor unit - 12 mm phenolic plywood decking between longitudinal beams, bolted, extended to front up to landing legs (protects tractor) and at rear above running gear, flush with top edge of crossmembers - Landing legs, 2 x 12 t, single-side operation (right), force equalization - Reinforced crossbeam for loading/unloading while uncoupled Axle and Suspension - 3x SAF Intradisc Plus Integral axles, disc brakes Ø430 mm (22.5"), 9 t/axle load, reinforced axle bodies, off-road version - Axle spacing: 1,310 + 1,410 mm - Axle lift on 1st axle, automatically raises/lowers dependent on load, with forced lowering and speed-limited start-up assistance (operated via cab button and brake pedal sequence) - 6 x 385/65 R 22.5, 164K steel rims 11.75 x 22.5, ET120 mm, silver Braking System - Brake system as per EC directives 71/320 or ECE R13 - Dual-circuit air brake system as per factory specification - EBS system 2S/2M, one axle sensed - RSS (Roll Stability Support) - Spring-loaded parking brake on 2 axles - Aluminum air tanks - Brake/air connections with 2 individual coupling heads (yellow/red) - EBS/ABS socket at front Air Suspension - Air suspension with raise/lower function - Automatic level set to programmed drive height above 15 km/h - Air bag diameter 360 mm Telematics - SWIT Schwarzmüller Intelligent Telematics, "LOCAL TRAC" package - Axle load display via EBS CAN bus signal, information shown on cab display Superstructure - Extra-strong steel headboard, approx. 2,500 mm high, with 2 strong central supports, top corners chamfered approx. 300 mm/45° - Stanchion holders mounted/adjustable, spacing: approx. 600 mm, then every 2,400 mm - 6 ExTe stanchion holders type 144, bolted clamp fitting Hodon Hrg Ropfx Ag Iefg - Stanchion tilt approx. 0.8° inward (suitable for sawn timber transport) - 6 pairs ExTe stanchions 144-S with bolted fitting, telescopic (2-piece), max. load per pair 7 t, coated in original signal orange - Telescopic key for stanchion operation - Stanchion load height: max. approx. 2,800 mm - 8 claw guard plates, approx. 200 mm long, fitted between stanchion holders (side) - 6 pairs lashing hooks on stanchion holders Lighting - 24V lighting system as per EC directive 76/756/EEC - 2 full LED five-chamber tail lights "Aspöck" with integrated control unit - 2 LED front position lights - 2 rear LED marker lights - Flashing LED side marker lights, activated via indicator signal - 2 license plate lights - 2 x 7-pi

Stanje: rabljeno, največja dovoljena obremenitev: 33.780 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2019, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Oprema: ABS, Schwarzmüller priklopnik za prevoz lesa s sedlom in stebrički * BPW osi z zračnim vzmetenjem in kolutnimi zavorami * 1. os dvignljiva * Nosilec za rezervno kolo * Pneumatike 385/65R22,5 Hfjdpoyld U Iefx Ag Iog * Aluminijasta platišča * Delovne luči * 2x shranjevalni prostor * Jost podporne noge Za dodatne informacije smo vam na voljo.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: VAVYS1339RD526996, lastna masa: 5.910 kg, največja dovoljena obremenitev: 30.090 kg, skupna masa: 36.000 kg, konfiguracija osi: 4x2, prva registracija: 07/2024, dolžina tovornega prostora: 13.000 mm, širina tovornega prostora: 2.500 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22,5, barva: črn, Leto izdelave: 2024, Oprema: ABS, our vehicle number #30370 3x SAF axles Tyre size 385/65 R 22.5 Hfedewuq Ibspfx Ag Isg Permissible gross weight 36,000 kg Payload 30,090 kg Unladen weight 5,910 kg Body dimensions inside L: 13,000 mm W: 2,500 mm Colour: black Lifting axle Disc brakes 8 pairs of Eco stanchions 8 pairs of lashing brackets Front wall height 2,500 mm air suspension SWIT – Schwarzmüller Intelligent Telematics reinforced axles side underrun protection spare wheel holder toolbox Jost landing legs 5x towing hooks at the rear floor plate LED tail lights ABS EBS Financing available upon request!!!

Stanje: rabljeno, lastna masa: 6.560 kg, največja dovoljena obremenitev: 18.440 kg, skupna masa: 25.000 kg, konfiguracija osi: 2 osi, prva registracija: 09/2017, dolžina tovornega prostora: 13.700 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 850 mm, medosna razdalja: 7.500 mm, barva: modra, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, dodatne luči, zavorni sistem na stisnjen zrak, * German semi-trailer * Very good visual condition, see photos * 2-axle low loader, Jumbo TO 152 DE * Loading platform: length 13,700 mm x width 2,540 mm * Loading height approx. 850 mm Hodpjxu Nnwefx Ag Iefg * Stake pockets * Multilock system * Wooden loading floor * Winch with cable remote control 15,000 lbs * Long aluminium loading ramps 3,000 x 400 mm, laterally adjustable * ROR axles * Air suspension * Haacon spindle supports * ABS + EBS * Work lights * Spare wheel * Toolbox * Brake drums * Wheelbase: 7,500 mm + 1,250 mm * Permissible gross weight up to 27,200 kg * Unladen weight 6,560 kg * Payload up to 20,640 kg If a new TÜV inspection is required, we are happy to provide an offer through our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without new DGUV, without new SP, without new UVV. Further trucks can be found on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspecting the goods to ensure there are no misunderstandings regarding condition and suitability. Inspection and viewing are possible at any time by prior appointment and are expressly desired. All information is provided without guarantee. We accept no liability for errors or inaccuracies in the offer. The buyer is obliged to independently inspect the condition and equipment of the goods/vehicles. Subject to changes, prior sale and errors.

Stanje: novo, lastna masa: 4.400 kg, največja dovoljena obremenitev: 19.600 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.600 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5, medosna razdalja: 8.795 mm, Oprema: ABS, | Krone AD Jumbo plato prikolica 3-osna Nova | Multilock zunanji okvir po celotni dolžini | Zračno vzmetenje spredaj in zadaj (dviganje/spuščanje) | Vrtljivo podvozje z krožno kroglo, nizko vzdrževalni vrtljivi venec | Vlečna ušesa 40 mm | BPW osi z bobnastimi zavorami | Nosilec za rezervno kolo | Dimenzije (D x Š x V): 8,60 x 2,48 x 0,93 m | Jeklena čelna stena 1,60 m | Medosna razdalja: 8.795 mm | Pnevmatike 12x spredaj/zadaj: 235/75 R 17,5 | Pridržujemo si pravico do napak, vnosov in predhodne prodaje. Hsdjy H Ilzepfx Ag Isfg