Moeslin Polpriklopnik Z Nizko Posteljo Za Prevoz Gradbenih Strojev nakup rabljenega (43.158)

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, BERTOJA SEMITRAILER 13.80m BRAND NEW, READY FOR REGISTRATION Ijdpfx Aaexpi A Rjnsar Galvanised double hydraulic ramp Protective sideboard on neck Winch preparation Self-steering axle CONTACT: 0823 1686306 335 6713062 OPENING HOURS: MONDAY-FRIDAY 8:30am–7:00pm - SATURDAY 8:30am–2:00pm WE OFFER A WIDE SELECTION OF USED MULTI-BRAND COMMERCIAL & INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf - Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way -S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man - Nissan V8 - Intarder- 770s - Limited Edition - 660 S Semitrailer - Refrigerated Tanker Semitrailer – Lamberet - Schmitz Isuzu - Fixed Platform - Crane - Tipper - 4 Axles - Rear 4 Axles - Tway-T-Way-540-460 HP - Xway-X-Way-Trilateral - V8 - Scania - Frost Edition Curtain Sider - Box Body - Tailgate Loader - Refrigerated Case - Insulated with Fridge - Van Domenico Truck srl accepts no liability for any discrepancies in technical data, fittings, or features, which may differ from those described. We recommend verifying the features of each specific vehicle.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 11.800 kg, največja dovoljena obremenitev: 25.500 kg, skupna masa: 36.800 kg, konfiguracija osi: 3 osi, prva registracija: 10/1998, dolžina tovornega prostora: 13.300 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 450 mm, vzmetenje: zrak, velikost pnevmatike: 245.70 R 17.5, barva: rdeča, Leto izdelave: 1998, Oprema: ABS, Bertoja extendable low loader, 3 axles with 2nd and 3rd self-steering axles, air suspension, ABS, year 1998, cradle length 5.30m with an additional 3.50m extension, ground clearance 45cm, removable module above the axles, adjustable detachable gooseneck, wired remote control for steering self-steering axles, good condition. DEALER: INTERDRIVE SRL - PARMA. Iajdpfewg E Rbox Aaner

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 7.200 kg, največja dovoljena obremenitev: 31.800 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2019, dolžina tovornega prostora: 13.700 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 800 mm, vzmetenje: zrak, velikost pnevmatike: 235.75 r 17.5, barva: prometno oranžna, Leto izdelave: 2019, Oprema: ABS, Rabljen polpriklopnik nizkopodni Moeslin, gosji vrat, rampe, 3 osi (tretja vodilna), zračno vzmetenje, EBS, priprava za pomične zadnje rampe, sprednja glava 120 cm, bočni kavlji Rud 5 ton, twist lock za kontejnerje 20+20, 40 in 45 čevljev, 3 prečne ojačitve za nosilce, 2 PVC orodjarni, višina od tal 84 cm, letnik 2019, na voljo pri trgovcu INTERDRIVE SRL-PARMA. Iajdpfx Aaexnqvcjnjr

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, lastna masa: 13.000 kg, največja dovoljena obremenitev: 37.100 kg, skupna masa: 50.100 kg, konfiguracija osi: 3 osi, prva registracija: 07/1995, dolžina tovornega prostora: 13.300 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 450 mm, vzmetenje: zrak, velikost pnevmatike: 245.70 R 17.5, barva: modra, Leto izdelave: 1995, Oprema: ABS, extendable low-loader De Angelis, year 1995, payload up to 37 tons, 3 axles with air suspension, ABS, 2nd and 3rd axles steering, extendable chassis with a central extension of additional 3.50 m, closed well (culla) 5.0 m, height from ground 44 cm, removable cover above axles, manual rear ramps, good condition, DEALER: INTERDRIVE SRL – PARMA Ijdswa T T Rjpfx Aansar

Stanje: novo, Leto izdelave: 2025, GVN prikolica s 3 osmi nizkopodnožna Za več informacij nas kontaktirajte; Iaedpfxoq Di Uvs Aanor

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, lastna masa: 8.000 kg, največja dovoljena obremenitev: 39.000 kg, skupna masa: 47.000 kg, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 13.000 kg, dovoljena osna obremenitev (os 2): 13.000 kg, dovoljena osna obremenitev (os 3): 13.000 kg, prva registracija: 07/1983, dolžina tovornega prostora: 11.870 mm, širina tovornega prostora: 2.500 mm, vzmetenje: parabolično listje (vzmet), barva: bela, Leto izdelave: 1983, Polpriklopnik CTC ZA90SRT47 Nizkopodni 11,87 m s hidravličnimi rampami in vitlom (4,10 m + 7,35 m) 3 osi Parabolično vzmetenje Dovoljena skupna masa 47.000 kg – nosilnost 39.000 kg Za specialne prevoze, dovoljena skupna masa kompozicije 56.000 kg Neto izvozna cena: 18.000,00 EUR Vse informacije brez garancije/ možnost napake pridržana. Ijdpfsy Axufex Aanear

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 11.200 kg, največja dovoljena obremenitev: 25.600 kg, skupna masa: 36.800 kg, konfiguracija osi: 2 osi, prva registracija: 09/2007, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 500 mm, skupna dolžina: 13.700 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245.70 R 17.5, barva: svetlo siva, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2007, Oprema: ABS, Rabljen polpriklopnik culla Bertoja, letnik 2007, 2 osi s hidravličnim krmiljenjem, podaljšljiva culla z osrednjim vzdolžnim nosilcem za dodatnih 4,0 m, zaprta culla dolžine 6,20 m, višina od tal 50 cm, nastavljiv in snemljiv vrat, stranski razširitveni elementi na platformi, idealni za kombajne, pnevmatsko vzmetenje, ABS, ventila za regulacijo višine, tehnični pregled do 31.10.2026 – PRODAJALEC INTERDRIVE SRL – PARMA. Iasdpfx Asy A Ih Ioanor

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 11.500 kg, največja dovoljena obremenitev: 52.500 kg, skupna masa: 64.000 kg, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 10.000 kg, dovoljena osna obremenitev (os 2): 10.000 kg, dovoljena osna obremenitev (os 3): 10.000 kg, dolžina tovornega prostora: 9.000 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 980 mm, skupna dolžina: 13.550 mm, skupna širina: 3.000 mm, skupna višina: 3.565 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, stanje pnevmatik: 100 odstotek, medosna razdalja: 1.360 mm, največja hitrost: 100 km/h, barva: sivo-črna, Leto izdelave: 2026, NÜKTE – CETRATEK 4-Axle Lowbed Semi-Trailer Powerful. Robust. Built for tough applications. The NÜKTE – CETRATEK 4-axle lowbed semi-trailer stands for maximum stability, high payload, and uncompromising everyday usability in professional heavy-duty transport. Featuring massive 4 x 10-tonne axle configuration on robust TRAX axles, a durable air suspension system, and a high-strength I-beam chassis constructed from S355J2+N quality steel, this lowbed trailer is the ideal solution for transporting construction machinery, agricultural equipment, wheel loaders, excavators, and heavy-duty vehicles. Even in its standard configuration, this semi-trailer impresses with well-thought-out, practice-oriented features: The first TRAX axle is configured as a lift axle, which significantly reduces tire wear during empty runs while improving maneuverability. The fourth TRAX axle is steered, allowing for precise maneuvering even on tight construction sites and company premises. A particular highlight is the hydraulically operated, laterally adjustable, one-piece loading ramps, enabling fast, safe, and convenient loading and unloading. Each ramp is rated for 20 tonnes of load per ramp, making them perfect for heavy machinery and vehicles. Iodpfsy Awchex Aanjar Maximum stability during loading is ensured by the standard hydraulic rear support system, which includes mechanical drop-down props. User-friendly operation is possible either via hydraulic remote control or directly at the vehicle, allowing all ramp and support functions to be operated safely and efficiently. In terms of quality, this trailer sets new standards: The entire chassis is shot-blasted, primed, and then coated twice with a high-quality 2-component paint system. We offer a 5-year warranty on the paintwork. The loading platform is fitted with 55 mm Dabema hardwood and protected in high-stress areas with reinforced checker plate. A high-quality Aspöck ADR-certified electrical system ensures maximum operational safety and meets the highest requirements for professional road use. With a loading platform length of 9,000 mm, width of 2,550 mm plus side extension of 250 + 250 mm, total length of 13,550 mm, loading height of 980 mm, and permissible gross weight of 64,000 kg, this lowbed trailer is perfectly suited for daily heavy-duty operations. The kingpin load is 24,000 kg, total axle load is 40,000 kg (4 × 10 t). Additional standard features include: - WABCO EBS 4S/2M - Air suspension - 16 + 1 tyres - 245/70 R 17.5 - Galvanised 12-tonne lashing rings - Toolboxes - Spare wheel - Aluminium covers on the gooseneck - Side extensions - Wooden decking on the platform Quality that convinces The high-grade finish with the modern 2-component paint system and the use of robust Dabema hardwood combined with additional reinforced checker plate ensure an exceptionally long service life—even under the harshest operating conditions on construction sites and in heavy-duty applications. CETRATEK—Technology you can rely on. Technical specifications and prices subject to change. All images are examples and may show special equipment or optional features.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 9.500 kg, največja dovoljena obremenitev: 44.500 kg, skupna masa: 54.000 kg, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 12.000 kg, dovoljena osna obremenitev (os 2): 12.000 kg, dovoljena osna obremenitev (os 3): 12.000 kg, dolžina tovornega prostora: 12.950 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 980 mm, skupna dolžina: 13.550 mm, skupna višina: 3.585 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R17,5, stanje pnevmatik: 100 odstotek, medosna razdalja: 1.360 mm, največja hitrost: 100 km/h, barva: sivo-črna, Leto izdelave: 2026, 3-axle lowbed semi-trailer | Lift axle | Hydraulic ramps | Extendable | 5-year warranty on paintwork | Options such as galvanization available Robust and professional 3-axle lowbed semi-trailer in heavy-duty design, ideal for transporting construction machinery, agricultural equipment, and heavy vehicles. The laterally extendable loading platform and hydraulically adjustable ramps allow for flexible and rapid loading of various types of machinery. Technical specifications: Overall length: 13,550 mm Width: 2,550 mm, extendable sideways: +250 mm per side Total width extended: 3,050 mm Platform length: 9,000 mm + 3,950 mm Platform height: 980 mm Gross vehicle weight: 54,000 kg Equipment: - 3 TRAX axles with air suspension, 12 tonnes each - 1st axle liftable Iasdpfjyzzqgsx Aanjr - WABCO EBS braking system - ADR-certified Aspöck / SABA LED lighting system - Hydraulically operated rear ramps, laterally movable - Hydraulic system with remote control - Additional manual control - Hydraulic rear supports + mechanical drop-down supports - 55 mm DABEMA hardwood floor - Reinforced steel / checker plate sections - Galvanized lashing points - Robust S355J2 heavy-duty chassis Delivery time (if not in stock) approx. 12 weeks after order Price and technical changes as well as prior sale reserved. The images shown are examples and may contain special equipment and/or optional features.

Stanje: novo, Leto izdelave: 2025, FOR SALE: NEW BERTOJIA LOW-BED TRAILER HITCH WITH SEMI-NEW TRACTOR. Iedpowd R D Ujfx Aanear

Stanje: rabljeno, lastna masa: 11.200 kg, največja dovoljena obremenitev: 36.800 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2025, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17.5, barva: siv, Leto izdelave: 2025, Oprema: ABS, For every used semi-trailer, you receive a current & comprehensive inspection and function report. Gooseneck: - Gooseneck with rear bevel of approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood floor Extendable loading area: - Telescopic loading area with rear incline approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm - Wheel recesses with 15 x 15 mm square climbing strips and widened sections in the lower area - Between the 1st and 2nd axle, 1 pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm - Incl. 3-piece removable galvanized covers over the wheel recesses (width 670 mm) – max. point load 5 t / pc - Recess in the incline and extending into the loading area for accommodating the excavator dipper stick, approx. 2,900 x 750 x 210/290 mm - 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) Iaedpfoyylduex Aaner - 5 pairs of swing-out lashing rings (LC 5,000 daN) - 2 pairs of swing-out lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator dipper recess (LC 5,000 daN) - Cutouts in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) Ramps: - One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering - Ramps with hydraulically folding ramp sections, hydraulic lifting unit, and hydraulically adjustable - Maximum load per pair: 40,000 kg Axles and tires: - BPW axles and suspension, 2 rigid axles, 1 trailing self-steer axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock operable via reverse gear and manual activation - Air suspension with raise and lower valve - Axle tools - TPMS tire pressure monitoring system compliant with ECE R 141 - Tires: 235/75 R17.5 3PMSF Accessories included: - Bracket for warning signs on the gooseneck and at the rear, left and right, each with socket - One spare wheel with holder in front of the bulkhead - 2" kingpin - Galvanized steel front wall approx. 400 mm high - Yellow-red air couplings at the front galvanized connection rail - 4 wheel chocks with holders - Galvanized, extendable width extensions approx. 230 mm per side - Galvanized folding supports under the incline of the loading area - Cover plates to bridge the gap between ramps and loading area - White reflective tape on sides and on extendable section, rear in red, according to EU regulations - Electro-hydraulic unit at the rear, under the loading area - European reflector boards (red-yellow) on the rear of the semi-trailer - Four extendable warning signs, each approx. 423 x 423 mm with position lamp (extend approx. 400 mm) - Bracket for rotating beacon on the warning signs - On the gooseneck, plug-in aluminium side and rear boards approx. 2,440 x 400 mm - Rear, galvanized plug-in stanchions removable (body length approx. 2,560 mm) - 2 pairs of WADER container pockets in the loading area for a 20ft or 30ft container - 3 pairs of stanchion pockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading area - Removable, galvanized intermediate table with 1 pair of WADER container pockets - 20 x 20 mm square climbing strips every 200 mm on the outer frame of the loading area incline - Painted sand layer as anti-slip protection on chequer plates on the gooseneck and loading area - Speed sticker 80 km/h on rear and both sides - Load manometer for determining axle loads, including load chart

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Oprema: dvižna zadnja plošča, DE ANGELIS 3S425 semi-trailer, max gross weight 42,500 kg, 13 tyres size 245/70R17.5'' Vehicle equipped with: Iasdpfx Aaoydcyyoner - Hydraulic loading ramps measuring 4.00x0.85 m, wood covered (non-sliding) - Electro-hydraulic power unit - 1 stainless steel toolbox 600x600x300 mm (ditch side) - Heavy-duty axles - Air suspension - 3rd axle self-steering - Lashing ring kit - 200 mm high aluminium sideboards on gooseneck FINANCING OR CUSTOMIZED LEASING PLANS AVAILABLE ON SITE. FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS, ALSO WITH ZERO DOWN PAYMENT. OTHER LOCATIONS OF OUR GROUP: DOMENICO TRUCK SRL HEADQUARTERS IN NAPLES DOMENICO ESPOSITO S.P.A. LOCATION IN EBOLI (SA) – OFFICIAL DEALER MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL AND MAXUS CONTACTS: 0823 1686306 335 6713062 OPENING HOURS: MONDAY-FRIDAY 8:30 AM – 7:00 PM – SATURDAY 8:30 AM – 2:00 PM WE OFFER A WIDE SELECTION OF MULTI-BRAND USED COMMERCIAL/INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf – Mercedes-Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way -S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man - Nissan V8 - Intarder- 770s -Limited Edition - 660 S Semi-trailer – Reefer Tipper Semi-trailer – Lamberet – Schmitz Isuzu – Fixed body – Crane – Tipper – 4 axles – 4 Rear Axles – Tway-T-Way-540- 460 hp - Xway-X-Way-Trilateral – V8 – Scania – Frost Edition Curtain-sided – Box – Drop-side loader – Fridge Cell – Insulated with Fridge – Van Domenico Truck srl declines any liability for discrepancies regarding technical equipment, options, and features that may in some cases differ from what is specified in the description. We invite you to verify the characteristics of the specific vehicle.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, lastna masa: 8.800 kg, največja dovoljena obremenitev: 28.000 kg, skupna masa: 36.800 kg, konfiguracija osi: 3 osi, prva registracija: 11/2002, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 750 mm, skupna dolžina: 13.700 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 205.65 r 17.5, odmik od tal: 750 mm, barva: svetlo modra, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2002, Oprema: ABS, dvižna zadnja plošča, Rabljen 4-osni nizkopodni polpriklopnik BPW Merker, z 3. in 4. krmiljeno osjo, pnevmatsko vzmetenje, spodnja platforma dolga 9,90 m in visoka 75 cm, enojne zadnje rampe dolge 3,10 m z elektrohidravličnim pogonom, ABS, ventil za nastavitev višine, zadnje podporne noge, ojačana pločevinasta tla, stranski kljuki na podestu, letnik 2002, tehnično pregledan do 30.9.2026 – PRODAJALEC INTERDRIVE SRL – PARMA. Iedpfxjyrnh Sj Aanoar

Stanje: rabljeno, lastna masa: 12.200 kg, največja dovoljena obremenitev: 37.900 kg, skupna masa: 50.100 kg, konfiguracija osi: 3 osi, prva registracija: 12/2023, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Leto izdelave: 2023, Oprema: ABS, You will receive a current and comprehensive inspection and function report with every used semi-trailer. Gooseneck: - Gooseneck with rear bevel, approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Extendable load area: - Extendable load area with rear bevel, approx. 1,000 mm x 8° - 5 pairs of outward-folding lashing rings (LC 5,000 daN) - 3 pairs of outward-folding lashing rings (LC 10,000 daN) - 1 pair of horizontal lashing rings at the front of the load area (LC 10,000 daN) - Cutouts in the outer frame of the load area for attaching tension belts (LC 2,000 daN) - Hardwood flooring, approx. 48 mm thick, with checker plate covering over the axles Ramps: - One pair of galvanized, two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering - Ramps with hydraulically folding ramp sections, hydraulic lifting system, and hydraulically adjustable - Maximum load per pair: 40,000 kg Axles and tyres: - BPW axles and suspension, all axles hydromechanically forced steered - Technical axle load: 12,000 kg - Air suspension with lift and lowering valve - Axle tools - Tyres 235/75 R 17.5 Accessories included: - 2" king pin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection strip Isdpfx Aaeyx E E Asnjar - 4 wheel chocks with holders - One spare wheel with holder in front of the front wall - Electro-hydraulic unit - Remote steering control from the front and rear via cable remote with push buttons, with axle alignment mode - Recess at the rear of the gooseneck for ALU access ramps - Mounts left and right on both the gooseneck and ramps for warning signs including sockets - Galvanized folding supports under the rear bevel of the load area - Ramp control valves fitted on the right side of the semi-trailer - Cover plates for bridging the gap between ramps and loading area - Removable ALU sidewalls and rear wall on the gooseneck, approx. 2,440 x 400 mm - Removable galvanized rear stanchions (body length approx. 2,560 mm) - 4 pairs of WADER container pockets in the load area for 1x 20ft, 2x 20ft, 40ft, or 1x 45ft container - 7 pairs of stanchion pockets for plug-in stanchions 100 x 50 mm in the outer frame of the load area - Galvanized extensions, extendable by approx. 230 mm per side - One INOX toolbox, 1,500x390x810 mm, under the load area on the right in driving direction - Square climbing strips, 20x20 mm, every 200 mm on the outer frame of the load area slope - Lift axle on the front axle, controlled by TEBS E depending on the current axle load and loading status - BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 - Four warning boards, extendable by approx. 400 mm, approx. 423 x 423 mm each, with position light - Radio remote control for the rear steering in addition to the cable remote, with indicator lights on the receiver for axle alignment - Non-slip sand coating applied on checker plates, over the king pin, and on the load area - 80 km/h speed limit sticker at the rear and on both sides - Load gauge for determining axle loads, including load diagram - HRM metallisation (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then the defined visible surfaces finished with metallisation using ZINACOR 850 (zinc 85% - alu 15%)

Stanje: novo, skupna masa: 78.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 850 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, Oprema: ABS, Gooseneck: • Gooseneck in SNT design to optimize loading area length, approx. 3,700 mm long, rear with a bevel approx. 1,000 mm x 10° • For tractor units: 4 x 2, 6 x 2 and 6 x 4 Loading Area: • Extendable loading platform, approx. 8,800 mm long with rear bevel approx. 500 mm x 10° • A recess in the platform and rear bevel to accommodate the excavator dipper stick, approx. 3,950 x 580 x 370/450 mm Ramps: • One pair of two-piece steel ramps, approx. 4,350 mm long and 900 mm wide • Hydraulically folding ramp tips • Ramps hydraulically adjustable separately approx. 235 mm outwards and approx. 215 mm inwards • Hardwood decking on the beveled part of the loading area • Ramp with hardwood decking • 20 x 30 mm square climbing strips, approx. every 200 mm on the outer frame of the ramp Axles and Tyres: • TWINAXLE-II independent wheel suspension with BPW stub axles, 1st axle steered in advance, all other axles are hydromechanically forced steered • 1st axle with electromagnetic reverse lock via reverse gear and manual activation • Technical axle load: 12,000 kg • Hydr. axle compensation, hydraulic cylinders with shut-off valves • Tyres 245/70 R 17.5 • TPMS tyre pressure monitoring system according to ECE R 141 Accessories Included: • Plug-in steel front wall, approx. 400 mm high • 4 wheel chocks with holder • Front connection bar with yellow-red air couplings Ijdpfx Aervw U Ssanoar • 3 kW electro-hydraulic power pack for hydraulic control, except for hydraulic winches • 1 spare wheel • 2 pairs of screw-in lashing rings • 1 pair of horizontal lashing rings in the rear area of the gooseneck • On the gooseneck: 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized • On the gooseneck: 1 plug-in ALU rear board, approx. 400 mm high, anodized • Approx. 40 mm thick hardwood decking on the gooseneck, checker plate over the king pin • 3.5" king pin • Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide • Load area locking with conically welded arresting profiles every 250 mm • Incl. pre-tensioning plate • 1 pair of lashing rings on the front cross member • 8 pairs of recessed, fold-out lashing rings in the outer frame of the platform • Extendable (galvanized) widenings approx. 230 mm per side • 1 pair of fixed open wheel recesses up to extension, approx. 700 x 410 mm, in the platform in front of the 1st axle • Wheel recesses with checker plate covering and 15 x 15 mm square climbing strips, approx. every 200 mm • 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm, in the platform between the 1st and 2nd axle • Wheel recesses with 15 x 15 mm square climbing strips and widenings in the lower section • ALU covers for the wheel recesses between 1st and 2nd axle, which can also be used as broadening planks • 1 pair of mechanical rear supports • 20 x 30 mm square climbing strips, approx. every 200 mm on the outer frame of the bevel of the loading area • Central lubrication system with 1 pump, BEKAMAX brand, standard grease as per NLGI-2 • Radio and cable remote control, with 2 indicator lights on the receiver for single wheel control • WABCO Smart Board system • The Smart Board is equipped with an odometer • 4 warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and mounts for rotating beacon

Stanje: novo, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.700 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 890 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimizing loading area length, approx. 3,700 mm long, with rear tapering of approx. 1,000 mm x 6° - For tractor units: 4 x 2 and 6 x 2 Loading platform: - Loading platform, approx. 9,700 mm long, with hydraulically foldable and lowerable rear section as well as hydraulically liftable front section for driving onto the gooseneck Axles and tyres: - BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle self-steering - 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manually - Technical axle load: 12,000 kg - Air suspension with lift/lower valve - 235/75 R 17.5 3PMSF twin tyres - TPMS tyre pressure monitoring system according to ECE R 141 BPW Auto Reverse Control: - Electrohydraulic auxiliary steering for the self-steering axle of a 3-axle unit - Automatic control of the self-steering axle when reversing via gyroscope sensor - Manual steering operation in forward and reverse using separate radio remote control - Manual operation enabled up to 10 km/h - System powered by separate electro-hydraulic unit Accessories included: - Removable steel front wall, approx. 400 mm high - 3 kW electro-hydraulic power pack - External beams on gooseneck with mounting holes for bolted lashing rings - First mounting hole approx. 200 mm from front, then approx. every 400 mm - One mounting hole at upper rear of external gooseneck beams for a bolted lashing ring - Grating cover with 5 mm sheet reinforcement on gooseneck and rear taper - 2" king pin - Guide plate on gooseneck for fifth wheel plate, approx. 500 mm wide - Round NATO socket at front connection bar (Maeler & Kaege VG 96 917) - 1 pair of removable side aluminium drop sides on gooseneck, approx. 400 mm high, anodized - 4 wheel chocks - Electric winch, approx. 5,400 kg pulling force, with radio remote control - Wire cable approx. 24 m long, cable ø approx. 9.5 mm, including cable pressure roller - Winch installed at the front inside the gooseneck - Continuous grating cover with 5 mm steel underlay for additional reinforcement, designed for point loads: - on the lift bed - on the loading platform - on the hydraulically lowerable rear section - Painted-on sand coating on the gooseneck covering plates and in transition areas between neck and lift bed, between lift bed and loading platform, and between loading platform and ramps - 1 spare wheel - Hydraulic lift bed, approx. 2,500 mm long, load capacity while driving in raised position: 9,000 kg - Hydraulic cylinders are fitted with load-holding valves - Cut-outs in the outer frame of the loading platform and lift bed for attaching tension straps - Extensive lashing positions - Hydraulically lowerable rear section for loading and unloading, can be raised to shorten total coupling length - Load capacity while driving in horizontal position: 10,000 kg - Shortening of total coupling length when raised: 2,350 mm - Painted-on sand coating on the complete ramp, except for the extendable galvanized part of the ramp - Hydraulically extendable rear extensions for loading and unloading - Radio remote control: - Control of hydraulic lift bed - Control of hydraulic lifting of rear extension Isdpfx Asyw Saksanjar - Control of hydraulic extension of rear extension - 1st axle with starting aid - Centralized lubrication system with 1 pump - 4 warning signs, approx. 423 x 423 mm, extendable

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, lastna masa: 8.400 kg, največja dovoljena obremenitev: 30.600 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2007, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 850 mm, skupna dolžina: 13.500 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245.70 R 17.5, odmik od tal: 850 mm, barva: svetlo modra, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2007, Oprema: ABS, Rabljen polpriklopnik De Angelis, letnik 2007, 3 osi s 3. krmiljeno, ABS, pnevmatsko vzmetenje, posamezne zadnje vzmetne rampe, gosji vrat, nakladalna površina dolga 9,95 m, znižan del, višina od tal 85 cm, bočne vezne kljuke, stranske stene na vratu, izvlečne table za izredne tovore, zadnje izravnalne noge, zadnji naklonski del za nakladanje, orodjarna, priprava za bočne razširitve, tehnično pregledano do 31.07.2026-PRODAJALEC INTERDRIVE SRL-PARMA. Iajdpfx Aeym A Aysansr

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, barva: rdeča, De Angelis 3S425 Semi-Trailer, BRAND NEW, READY FOR REGISTRATION Maximum mass: 42,500 kg 13 tires, size 245/70R17.5 Vehicle equipped with: - Hydraulic loading ramps, 4.00 x 0.85 m, wood-covered (non-translatable) - Electro-hydraulic control unit - 1 stainless steel toolbox 600x600x300 mm (ditch side) - Gigant axles - Air suspension - 3rd steering axle - Ring kit - 200 mm high aluminum sideboards on gooseneck PERSONALIZED FINANCING OR LEASING SOLUTIONS AVAILABLE ONSITE. FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS, ALSO WITH ZERO DOWN PAYMENT. OTHER BRANCHES IN OUR GROUP: DOMENICO TRUCK SRL NAPLES BRANCH DOMENICO ESPOSITO S.P.A. EBOLI (SA) BRANCH - OFFICIAL DEALER FOR MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL, AND MAXUS CONTACTS: 0823 1686306 335 6713062 BRANCH OPENING HOURS: MONDAY-FRIDAY 8:30/19:00 - SATURDAY 08:30/14:00 WE OFFER A LARGE SELECTION OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf - Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way -S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man - Nissan V8 - Intarder- 770s -Limited Edition - 660 S Semi-trailer - Refrigerated Semi-trailer Tank – Lamberet - Schmitz Isuzu - Fixed body - Crane - Tipper - 4 axles - 4 Rear Axles - Tway - T-Way-540- 460 HP - Xway-X-Way-Trilaterale - V8 - Scania - Frost Edition Curtain-sided - Box - Tail-lift Truck - Refrigerated Unit - Insulated With Fridge - Van Iedoylayaepfx Aanear Domenico Truck srl declines any responsibility for any discrepancies regarding technical equipment, options, and features which may in some cases differ from those stated in the description. We invite you to verify the characteristics of the specific vehicle.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 9.800 kg, največja dovoljena obremenitev: 30.200 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2022, naslednji pregled (TÜV): 02/2026, dolžina tovornega prostora: 13.800 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 870 mm, skupna dolžina: 13.700 mm, vzmetenje: zrak, velikost pnevmatike: 245.70 R 17.5, barva: rdeča, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2022, Oprema: ABS, dvižna zadnja plošča, Rabljen polpriklopnik Komodo nizki ležaj z rampami, letnik 2022, 3 osi s znižano gooseneck zasnovo, 1. os dvižna, 3. krmiljena, EBS, nizek pod z dolžino 10 m in višino 87 cm od tal, dvojne široke rešetkaste rampe dolžine 4,0 m, nastavljive po širini, bočna razširitvena krila, bočne in talne RUD kljuke za 8 ton, izvlečne stranice na vratu, pnevmatsko vzmetenje, pod iz lesa in pločevine, stranska orodjarna, velik zaboj na vratu, podporna stopala z dvema hitrostma, odlično ohranjeno, revidirano do 28.02.2026 – PRODAJALEC INTERDRIVE SRL PARMA. Ijdpfsyfwdiex Aanjar

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 7.000 kg, največja dovoljena obremenitev: 32.000 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2020, dolžina tovornega prostora: 13.200 mm, širina tovornega prostora: 9.950 mm, višina nakladalnega prostora: 400 mm, skupna dolžina: 13.200 mm, vzmetenje: zrak, velikost pnevmatike: 245.70 R 17.5, odmik od tal: 800 mm, Leto izdelave: 2020, Oprema: ABS, rabljen Pavelli nizkopodni vozni pod za prevoz vozil, 3 osi, s krmiljeno zadnjo osjo, pnevmatsko vzmetenje, EBS, pocinkovano ogrodje, poglobitve 40 cm med vratom in 1. osjo, poglobitev med 2. in 3. osjo z odstranljivimi nosilci, stranske kljuke Rud s 7-tonskimi ovratniki, odstranljive plošče na oseh, odstranljive aluminijaste rampe dolžine 2,50 m, leto 2020, pregledan do 31.01.2026 – PRODAJALEC INTERDRIVE PARMA Iasdpfx Aoybbgyjansr

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 7.600 kg, največja dovoljena obremenitev: 30.400 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2010, dolžina tovornega prostora: 9.800 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 850 mm, skupna dolžina: 13.650 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245.70 R 17.5, odmik od tal: 850 mm, barva: rdeča, Leto izdelave: 2010, Oprema: ABS, Rabljeni tovornjak za prevoz strojev Torésan, 3 osi s 3. krmiljeno, gosji vrat okvir z vdolbinami med vratom in 1. osjo z odstranljivimi pokrovi, zračno vzmetenje, ročno odstranljive zadnje rampe dolžine 2,60 m, osrednja vdolbina znižuje višino nakladanja iz 85 cm na 65 cm, zadnje uravnoteževalne noge, letnik 2010, vključene stranske odprtine in leseni stebri, PRODAJALEC INTERDRIVE SRL - PARMA Iajdpoybakwjfx Aaner

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, lastna masa: 7.400 kg, največja dovoljena obremenitev: 29.400 kg, skupna masa: 36.800 kg, konfiguracija osi: 3 osi, prva registracija: 09/1997, dolžina tovornega prostora: 1.360 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 850 mm, vzmetenje: zrak, velikost pnevmatike: 245.70 R 17.5, stanje pnevmatik: 70 odstotek, odmik od tal: 850 mm, barva: oranžna, Leto izdelave: 1997, Oprema: ABS, dvižna zadnja plošča, Rabljen nizkopodni polpriklopnik De Angelis z vitlom, 3 osi (3. krmiljena), pnevmatsko vzmetenje, ABS, šasija labodji vrat z dvojnimi elektro-hidravličnimi zadnjimi rampami po celotni širini, hidravlično vitlo pod vratom, največja nosilnost 24 ton, spodnja nakladalna ploščad dolžine 9,95 m, višina 85 cm od tal, aluminijaste stranske stranice višine 70 cm – odpirajoče in snemljive, letnik 1997, tehnični pregled do 31.12.2026. PRODAJA: INTERDRIVE SRL – PARMA. Ijdpfx Aox H S Awsansar

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 12.000 kg, največja dovoljena obremenitev: 48.000 kg, skupna masa: 60.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2017, višina nakladalnega prostora: 850 mm, skupna dolžina: 13.600 mm, skupna širina: 2.550 mm, skupna višina: 850 mm, vzmetenje: zrak, velikost pnevmatike: 245.70 R 17.5, stanje pnevmatik: 74 odstotek, barva: zelen, Leto izdelave: 2017, Oprema: ABS, dvižna zadnja plošča, Rabljeni De Angelis izjemni raztegljivi nizkoploščni polpriklopnik, 4 osi (1. os dvižna, 3. in 4. krmiljeni), šasija raztegljiva za dodatnih 3,70 m, zračno vzmetenje, EBS, Rud kavlji na tleh za 7 t, elektrohidravlične posamezne rampe, stranski razširitvi, zadnje in prednje stabilizacijske noge, letnik 2017, utori za stebre, jekleno-lesena podlaga z zaprto nizko platformo 9,40 m + 3,70 m podaljška, višina od tal 85 cm, aluminijaste stranice na vratu, bruto nosilnost do 70 t, lastna masa 16 t, tehnični pregled veljaven do 30. 4. 2026. Prodajalec: INTERDRIVE SRL, Parma. Iaedpfxox H Swus Aanjr

Stanje: rabljeno, številka stroja/vozila: W09TS300870M49625, lastna masa: 12.400 kg, največja dovoljena obremenitev: 32.600 kg, skupna masa: 450.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 14.340 mm, skupna širina: 2.550 mm, skupna višina: 3.780 mm, velikost pnevmatike: 235/75R17.5, barva: modra, Leto izdelave: 2008, The Meusburger MTS 3 low-loader is the ideal solution for anyone seeking a reliable, robust, and versatile truck trailer. Its high-quality workmanship and sturdy construction ensure a long service life and a high level of safety in any application. Thanks to its spacious platform, the MTS 3 offers ample room for a wide variety of loads, whether in construction or heavy haulage. The premium build quality and solid design make it a worthwhile investment for businesses. For more information or consultation, please do not hesitate to contact us! Performance Features / Basic Data: Axles: 3 Length: 14.34 m Width: 2,550 mm Height: 3,780 mm Unladen weight: 12,400 kg Kingpin load: 18,000 kg Gross vehicle weight: 45,000 kg (technical) Max. axle load: 10,000 kg Tyres: 235/75R17.5 Equipment: - Two-piece hydraulic rear ramp - Axle spacing 1/2: 1.41 m - Axle spacing 2/3: 1.31 m - Axle 1: liftable - Axles 2 and 3: hydraulically steered - NATO socket Iaedpeygxb Sefx Aanjr

Stanje: rabljeno, številka stroja/vozila: W09H20338BHZ07032, lastna masa: 12.700 kg, največja dovoljena obremenitev: 25.300 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2012, skupna dolžina: 13.950 mm, skupna širina: 2.550 mm, skupna višina: 2.800 mm, velikost pnevmatike: 235/75R17.5, barva: modra, Leto izdelave: 2012, The Zanner STL 38 low-bed trailer is a robust and versatile semi-trailer, ideal for transporting heavy and oversized cargo. Its sturdy construction and flexible application possibilities provide an efficient solution for your logistics and transport needs. Thanks to its low loading height and access ramps, loading and unloading are particularly straightforward, saving you both time and effort. Whether in the construction industry or for heavy haulage, the Zanner STL 38 impresses with its performance and durability, making it a worthwhile investment. If you are interested, we are happy to provide you with further information or a consultation! Specifications/Main Data: Length: 13.95 m - 14.37 m Iodpeyguxmjfx Aansar Width: 2.55 m Height: 2.80 m - 3.80 m Loading height: 920 mm Gooseneck: 1,350 mm Unladen weight: 12,700 kg Kingpin load: 11,000 kg Perm. total weight: 38,000 kg Maximum axle load: 10,000 kg Tyres: 235/75R17.5 Axles: 3 Axle spacing 1-2: 1.41 m Axle spacing 2-3: 1.31 m Lifting axle: 1 Steering axles: 2 Equipment: - Two-piece hydraulic ramp, adjustable - Hydraulic forced steering - Central platform vertically pivotable - Hydraulic cable winch with remote control - Hydraulic steering - Hydraulic supports - NATO plug