Müller-Mitteltal Ts2 Kompakt Tieflader 2 Achse Hydr. Rampen nakup rabljenega (51.575)

Stanje: rabljeno, največja dovoljena obremenitev: 23.900 kg, skupna masa: 31.000 kg, konfiguracija osi: 2 osi, prva registracija: 06/2007, Leto izdelave: 2007, Notranja št. vozila: G400178 Na voljo takoj na našem dvorišču v Kaufungenu VEČ INFORMACIJ: Luis Lucena Viktoria Sologubova NEMŠČINA Müller-Mitteltal TS2 KOMPAKT prikolica za težke tovornjak ? 2 osi ? hidravlične rampe Robustna prikolica Müller-Mitteltal TS2 KOMPAKT, izdelana leta 2007. Prikolica z 2 osmi ima hidravlične rampe, zračno vzmetenje in nosilnost 23.900 kg. Z dovoljeno skupno maso 31.000 kg je še posebej primerna za transport težkih gradbenih in delovnih strojev. Tehnični podatki: * Št. vozila: G400178 * Stanje vozila: Rabljeno vozilo * Kategorija: Prikolica za težke tovornjak * Proizvajalec: Müller-Mitteltal * Model: TS2 KOMPAKT * Prva registracija: 06/2007 * Letnik: 2007 * Osi: 2 * Dovoljena skupna masa: 31.000 kg * Lastna teža: 7.100 kg * Nosilnost: 23.900 kg * Skupna dolžina: 10.800 mm * Nemško vozilo Oprema: * Hidravlične rampe * Zračno vzmetenje * Dvooksna šasija * Robustna konstrukcija prikolice za težke tovornjak Ogled in preizkus delovanja je možen po predhodnem dogovoru. Dodatne informacije, fotografije in videoposnetke lahko dobite na zahtevo. Pridržujemo si pravico do sprememb, napak in predhodne prodaje. ANGLEŠČINA Müller-Mitteltal TS2 KOMPAKT low-loader trailer – 2 osi – hidravlične rampe Robustna prikolica Müller-Mitteltal TS2 KOMPAKT, izdelana leta 2007. Ta dvooksna prikolica je opremljena s hidravličnimi rampami za nakladanje, zračnim vzmetenjem in nosilnostjo 23.900 kg. Z dovoljeno skupno maso 31.000 kg je še posebej primerna za transport težkih gradbenih in delovnih strojev. Tehnične specifikacije: * Referenčna številka: G400178 * Stanje: Rabljeno Bledpfozahg Djx An Tel * Kategorija: Prikolica za težke tovornjak * Proizvajalec: Müller-Mitteltal * Model: TS2 KOMPAKT * Prva registracija: 06/2007 * Leto izdelave: 2007 * Osi: 2 * Dovoljena skupna masa: 31.000 kg * Lastna teža: 7.100 kg * Nosilnost: 23.900 kg * Skupna dolžina: 10.800 mm * Nemška prikolica Oprema: * Hidravlične rampe za nakladanje * Zračno vzmetenje * Dvooksna šasija * Robustna konstrukcija prikolice za težke tovornjak Ogled in preizkus delovanja sta možna po predhodnem dogovoru. Dodatne informacije, fotografije in videoposnetke lahko dobite na zahtevo. Pridržujemo si pravico do sprememb, napak in predhodne prodaje. Pridržana pravica do sprememb. Z veseljem sprejmemo vaše rabljeno vozilo v plačilo. Financiranje je mogoče neposredno pri nas. GOLEC NUTZFAHRZEUGE GMBH Govorimo: nemško, angleško, špansko, poljsko, ukrajinsko, rusko, bolgarsko.

Stanje: rabljeno, največja dovoljena obremenitev: 31.820 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/1980, dolžina tovornega prostora: 9.700 mm, širina tovornega prostora: 3.000 mm, skupna širina: 2.550 mm, skupna višina: 900 mm, Leto izdelave: 1980, Oprema: ABS, dvižna zadnja plošča, Prikolice Müller-Mitteltal T4, prikolica z nizko nosilno površino * Osne osi SAF s kolutnimi zavorami * Dvojne pnevmatike * Nizka nosilna površina z razširitvijo * Hidravlične nakladalne rampe, pomične (2 kosa) Bodpfx Anoy Skl Ie Tsll * Prekošen vmesni del, po katerem se lahko vozi * Dodatne opore zadaj * Izvedba z vrtljivo ploščo ----Dimenzije in nosilna površina: dolžina nosilne površine približno 9.800 mm * Širina nosilne površine: 2.550 – 3.000 mm * Višina nosilne površine: 900 mm ----* Dovoljena skupna masa: 40.000 kg * Nosilnost: 31.820 kg * Pnevmatike: 235/75R17.5 ----Števila vozil: 11892----Pridržujemo si pravico do sprememb in napak.----Oglaševanje in različne napisne oznake so bile digitalno odstranjene. -----Z veseljem vam bomo pomagali pri vseh formalnostih, ki nastanejo pri nakupu vozila. Enostavno nam sporočite vaše želje in predloge, mi pa bomo poskrbeli za ostalo. Poleg tega vam lahko za doplačilo ponudimo naslednje storitve:----Prevzem vašega starega vozila * Tehnični pregled/odobritev * Celotna ureditev izvoza * Posredovanje pri financiranju * Prijava za izvozne oznake * Prevoz vozil * Registracija vozil * Reševanje in transport vozil ----?VAŠA VTS EKIPA

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, lastna masa: 8.000 kg, največja dovoljena obremenitev: 39.000 kg, skupna masa: 47.000 kg, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 13.000 kg, dovoljena osna obremenitev (os 2): 13.000 kg, dovoljena osna obremenitev (os 3): 13.000 kg, prva registracija: 07/1983, dolžina tovornega prostora: 11.870 mm, širina tovornega prostora: 2.500 mm, vzmetenje: parabolično listje (vzmet), barva: bela, Leto izdelave: 1983, Polpriklopnik CTC ZA90SRT47 Bjdpsy Axufjfx An Tjll Nizkopodni 11,87 m s hidravličnimi rampami in vitlom (4,10 m + 7,35 m) 3 osi Parabolično vzmetenje Dovoljena skupna masa 47.000 kg – nosilnost 39.000 kg Za specialne prevoze, dovoljena skupna masa kompozicije 56.000 kg Neto izvozna cena: 18.000,00 EUR Vse informacije brez garancije/ možnost napake pridržana.

Stanje: rabljeno, konfiguracija osi: 2 osi, prva registracija: 01/1989, Leto izdelave: 1989, Oprema: ABS, = Dodatne možnosti in dodatna oprema = - Elektronski zavorni sistem (EBS) = Opombe = Langendorf, prikolica z dvema osjema, tandem, prikolica za težke tovora Prikolica za težke tovora, dve osi ID št. 686 Z veseljem vam bomo svetovali Bsdpsxt Tblsfx An Toll Podpis pogodbe ali prevzem vozila lahko opravite pri nas v avtohiši. Prosimo, dogovorite se za termin. Če se ne morete pripeljati do naše avtohiše, vam ponujamo celoten postopek prek telefona/e-pošte/WhatsAppa/faksa. Po želji vam novo vozilo dostavimo neposredno na vaš naslov. To pomeni najboljšo ceno, največjo varnost in udobje pri nakupu avtomobila. Odkup Z veseljem odkupimo vaše rabljeno vozilo. Ponujamo vam možnost digitalne ocene vozila na podlagi fotografij vašega vozila, tudi brez obiska avtohiše. Naša specializirana ekipa za odkup vam ponuja zagotovljeno najvišjo ceno. Po želji vam novo »rabljeno« vozilo dostavimo neposredno na vaš naslov po vsej Nemčiji in odpeljemo vaše rabljeno vozilo. Financiranje – lizing Neposredna potrditev in prevzem obstoječega kredita *Vaš specializirani partner za osebna vozila, dostavna vozila, gospodarska vozila in gradbene stroje *ITC Gmbh & Co KG Siemensstraße 7 32312 Lübbecke (industrijska cona) Stalno več kot 400 vozil na zalogi Podatki, navedeni v oglasih, na internetu, na cenovnih tablicah in slikah, so nezavezujoči opisi in ne predstavljajo zagotovljenih lastnosti. Prodajalec ne prevzema odgovornosti/jamstva za tiskarske in prenosne napake. Izpostavljena oprema je po potrebi treba dodatno preveriti s strani kupca. Naša ponudba je na splošno brez novega tehničnega pregleda, z veseljem vam bomo pripravili ponudbo naše partnerske delavnice. Pridržujemo si pravico do sprememb in napak. = Dodatne informacije = Lastna teža: 1.700 kg Nosilnost: 3.300 kg Največja dovoljena masa: 5.500 kg Prodajna cena: 5.999 €, 6.920 US$ Davek na dodano vrednost/davčni sistem na razliko: davek na dodano vrednost je odbitljiv.

Stanje: rabljeno, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2022, naslednji pregled (TÜV): 03/2027, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Oprema: ABS, Mobil & WhatsApp Fynn Jacobsen ----V takojšnji uporabi, VEGA nizkopodna prikolica z dvižnimi ter krmiljenimi osmi VEGA 3-osna nizkopodna prikolica VIN: NR9VEGA3XAN257023 Prva registracija: 15.12.2022 Informacije v nemščini: Podvozje * 3-osna nizkopodna prikolica * 1. os dvižna * 2. os fiksna * 3. os prisilno vodena * Največja dovoljena skupna masa: 48.000 kg * Obremenitev osi: 3 × 10.000 kg * Obremenitev sedla: 18.000 kg * Vse osi z zračnim vzmetenjem * Platišča iz aluminija Nakladalna površina * Hidravlično spuščljivo poglobljeno ležišče za nalaganje preko labodjega vratu * Razširljivo do 3.000 mm širine * Dovolj pritrdilnih in vpenjalnih točk na obeh straneh Sistem ramp * Zložljive nakladalne rampe z izjemno nizkim nakladalnim kotom * Hidravlično upravljanje: * Dviganje in spuščanje ramp Bedezfw Nqspfx An Tsll * Bočno premikanje levo in desno Hidravlika * Vključen elektrohidravlični agregat Razsvetljava * LED razsvetljava Aspöck * LED delovne luči * LED vzvratne luči Shranjevalni in orodjarni prostor * Orodjarna s pokrovom na labodjem vratu * Dodatne shranjevalne skrinje levo in desno Prodaja je možna samo pravnim osebam ali izvoznikom, brez garancije. Vse cene so brez novega tehničnega pregleda, z veseljem pripravimo neobvezujočo ponudbo za nov tehnični pregled. Za vsa gospodarska vozila in prikolice z veljavnim tehničnim pregledom nudimo izvozne in kratkoročne tablice. (RUMENA) Kratkoročne tablice (5 dni) – 200 € + DDV (RDEČA) Izvozne tablice (9 dni) – 400 € + DDV (RDEČA) Izvozne tablice (15 dni) – 450 € + DDV (RDEČA) Izvozne tablice (30 dni) – 500 € + DDV Pri nakladanju na nizkopodne prikolice, polprikolice ali podobno vam z veseljem pomagamo. Navedene informacije v oglasih, na internetu, na cenikih in slikah so neobvezujoče in ne predstavljajo zajamčenih lastnosti. Prodajalec ne prevzema odgovornosti/garancije za napake v tipkanju ali prenosu podatkov. Oprema navedena v oglasu mora biti preverjena posebej po potrebi. Pridržujemo si pravico do napak in predhodne prodaje. Smo avtomehanična delavnica z nazivom mojster in pogodbeni partner Hiab, Meiler, Terberg in HMF. Pomagamo pri izvoznem postopku in urejanju vseh izvoznih formalnosti.

Stanje: rabljeno, največja dovoljena obremenitev: 31.000 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2024, dolžina tovornega prostora: 9.290 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 950 mm, * PT 40.0 Profi ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 4 x 11 tonne Gigant axles ----Suspension: * Air suspension with lifting and lowering system and RtR valve ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment ----Lighting / Electrical: * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12 / 24 V * LED rotating beacon (removable) at the rear * 2 LED reversing lights (activated via reverse gear) ----General Attachments: * Manometer (pressure gauge) for load weight determination (axles separated into 2 air suspension circuits) * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning boards, front and rear * Front axle plastic mudguards with spray protection * Rear axle straight galvanized steel side skirts with spray protection * Reflective contour tape on the sides and rear * Tool box, black powder-coated galvanized steel, approx. 1,000 mm wide, 600 mm deep, 300 mm high ----Low Loader Platform: * Front extension in front of the turntable platform, approx. 490 mm long with 45° corners * ROBOT-WELDED anti-slip coating on the steel plate of the turntable platform * Hardwood flooring on the running areas of the low-bed platform ----Load Securing (La-Si package consists of): Bsdpfx Anol Tnu As Toll * 1 x 13.4 t UVV lashing ring left & right in front of the headboard carrier * 4 fixing holes each side in the turntable platform, each with 2 t lashing capacity * 1 pair of lashing rings (13.4 t), suspended at the rear left & right in front of the rear carrier * 4 pairs of UVV lashing rings (10 t) per side, pivotable and lowerable, loadable in all directions and recessed into the external frame * 3 stake pockets per side, each offering 2 t lashing capability simultaneously ----Widening Package: * Hot-dip galvanized mechanical folding outriggers for 3 m overall width (not in the rear slope) * Beam bracket for widenings under the chassis on the left, longitudinally mounted ----Excavator Arm Rest: * Excavator arm rest above the rear axle up to the end cross member, approx. 2,100 mm long and approx. 190 mm deep * 2 pairs of 6.4 t lashing rings per side in the excavator arm rest ----Ramps: * Hydraulically operated one-piece drive-on ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * Outer planks of the ramps made from hardwood * Steel construction prepared for 6-way control valve ----Loading Height: * Loading edge unladen approx. 950 mm +/- 20 mm ----Tyres: * Tyres 235/75 R 17.5 ----Coating/Paintwork: * Chassis, turntable, folding outriggers, mechanical supports, and drive-on ramps hot-dip galvanized * --Axles, air tanks, drawbar painted black-- ----Infos: * Vehicle has a daily registration as of 07/2024, due to the missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Available immediately from Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 14.020 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2008, naslednji pregled (TÜV): 12/2026, širina tovornega prostora: 2.750 mm, Oprema: ABS, ? 5-krat stranska zaščita ? 5-krat pritrdilni obroč ? 40-mm pritrdilni obroč ? hidravlične rampe ? višina nakladalne platforme: približno 950 mm Bedpjzx I Drefx An Toll ? bobnasta zavora ? priključek Duomatic ? ABS ? vzmetenje s listnatimi vzmetmi ? EBS ? dvojna pnevmatika ? osi BPW Müller-Mitteltal služi samo kot zamenjava, ker blagovne znamke »Aschwege & Tönjes« ni mogoče najti. Vse informacije so podane brez jamstva / pridržana možnost predčasne prodaje.

Stanje: rabljeno, največja dovoljena obremenitev: 37.530 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2012, naslednji pregled (TÜV): 11/2026, skupna širina: 3.000 mm, skupna višina: 3.780 mm, Oprema: ABS, * Gooseneck with foldable side walls * Low bed length: 11,950 mm - 15,450 mm * Low bed extendable in steps by 3,500 mm * Low bed width extendable by 460 mm * Hydraulically adjustable loading ramps (split, 2 parts) * Stake pockets * Wabco SmartBoard * 4 axles with twin tires * 1st axle liftable * 3rd + 4th axle with steering function * Wheel chocks ----* Tire size: 235/75R17.5 * Technical gross weight: 58,000 kg * Unladen weight: 12,470 kg * Overall length: 13,700–17,200 mm * Overall width: 2,540–3,000 mm * Safety inspection due: 05/2026 ----Vehicle number: 12062----Subject to errors and prior sale----Advertising and various lettering have been digitally removed.----We are happy to assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions—we will take care of everything. Among other services, we can offer you the following for an additional fee:----* Trade-in of your old vehicle Bljdpfey T Dyzex An Tsl * HU/Safety inspection * Complete export processing * Financing brokerage * Application for export license plates * Vehicle transfers * Vehicle registration * Recovery and vehicle transport ----?YOUR VTS TEAM

Stanje: novo, največja dovoljena obremenitev: 10.800 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalizing device ----Drawbar / Flange Hitch Eye: Bljdpfjrwc R Rox An Tel * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck via EBS signal – no installation required on the truck side * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General Fittings: * Landing gear at the front * External folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, fitted front right outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Bed: * 50 mm softwood floor * Provisions in front of the bulkhead for retrofitting container locks * Bolt-on 400 mm bulkhead made of smooth sheet * Removable rear stanchions, bolted * Drop sides with spring assist ----Load securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option to install 3 t retractable lashing rings every 600 mm * 1 x 6.3 t lashing point in each front and rear corner * Various holes in the headboard and rear crossmember for 1.2 t lashing options * Profifix lashing rail centrally positioned along the longitudinal axis for securing up to LC 3000 daN ----Ramps: * One-piece hydraulic mesh drive-on ramps, approx. 2,750 x 600 mm (collapsible to 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump output on the truck of over 40 l/min up to max. 140 l/min) ----Painting: * Chassis, drawbar, bulkhead, mechanical drop supports and drive-on ramps hot-dip galvanized * Axles, springs, air reservoirs, landing gear front, and flange hitch eye painted in black shade * Drop sides painted in RAL 9010 pure white * Painting of the side walls in a RAL color of your choice available at extra charge ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex Egestorf

Stanje: novo, lastna masa: 10.100 kg, največja dovoljena obremenitev: 38.900 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, velikost pnevmatike: 245/70 R 17,5, obratovalna teža: 10.100 kg, Oprema: ABS, Chassis: - Sturdy welded steel frame construction with front frame cranking and flat loading platform, rear ramped section approx. 500x100 mm - Gooseneck 200 mm with beveled corners - Sloped gooseneck end approx. 500x100 mm (traction ribs on outer frame behind rear inclination) - 2 kingpin positions with replaceable 2" kingpin - Outer frame closed on the outside as perforated frame for lashing with tension belts (chains not permitted) - Reinforced frame design / point load at the center of gravity - Prepared for extendable load platform widenings - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting after 2nd axle to end of vehicle - 1 pair wheel recesses in front of axle with steel covers (covers with Körapur coating), depth approx. 400 mm, and 1 pair between 1st and 2nd axle, steel covers - Underrun protection = extended end plate - Drop-down supports at rear Bljdowviwkopfx An Tol Ramps: - 2-piece drive-up ramps, custom design, with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting mechanism (only in connection with electrohydraulic unit) - Width approx. 800 mm - Wood topping - Incl. traction ribs on ramps - Can be secured for travel with tension belts - Operated by manual lever mounted rear right in direction of travel - Hydraulically laterally shiftable Floor: - 35 mm larch wood floor with aluminum omega profiles Landing Gears: - Mechanical 24 t landing gears, operated from one side with load equalization Axles, Steering, and Tires: - BPW air suspension axles, each rated at 10 t axle load, airbag diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lift and lower device, total stroke approx. 200 mm - 2nd drive position via ball valve +50 mm - 1st axle as lift axle (wired via EBS), operation fully automatic with mechanical emergency actuation via button on trailer - 3rd axle as friction steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, center-fitted offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring Accessories: - Plug-in side walls and rear wall on gooseneck approx. 400 mm high - Spare wheel holder - Lateral aluminum underrun protection - 4 wheel chocks - Long license plate holder in end plate - 1 detachable ECE sign at rear - 11 pairs ZK modules 10t on the sides: - 2x on the gooseneck - 9x on the load platform - Steel mudguards with clear pass - Extendable warning panels incl. 3 position lamps each, front at landing gears and rear before end plate, infinitely extendable up to loading width 4,500 mm - 4 plug-in holders for warning panels in stake pockets on loading surface - 6 pairs of lateral stake pockets for 100x50 mm stakes - 2 rows of crosswise stake pockets for 100x50 mm stakes on the gooseneck from outer frame towards main frame (1x before and 1x after kingpin positions) - 3 rows of crosswise stake pockets for 100x50 mm stakes on loading platform from outer frame towards main frame (1x in front area, 1x before 1st axle, 1x after 3rd axle) - 2 pairs of steel plates in load platform for container locks to receive 1x 20ft container - Rubber apron mounted on underrun protection - Steel shot blasting, chassis hot-dip galvanized and primed - Chassis/wheel hubs/outer frame painted in DB 7350 Nova grey

Stanje: rabljeno, največja dovoljena obremenitev: 31.000 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2024, dolžina tovornega prostora: 9.290 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 950 mm, * PT 40.0 Profi ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering system, including RtR valve ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment ----Lighting / Electrics: * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12 / 24 V * Removable rear LED beacon * 2 LED reversing lights (activated via reverse gear) ----General equipment: * Manometer - pressure gauge for load weight determination (axles separated into 2 air suspension circuits) * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning sign sets front and rear * VA plastic quarter mudguards with spray protection * HA straight galvanized steel skirts with spray protection * Reflective contour tape on sides and rear * Tool box, galvanized steel sheet, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high ----Low loader platform: * Forepart in front of the turntable platform, approx. 490 mm long with 45° corners * ROBOT-welded anti-slip surface on the steel plate of the turntable platform * Hardwood floor on the running surfaces of the low loader platform ----Load securing (La-Si package comprising): * In front of the front wall support, 1 x 13.4 t UVV lashing point each left & right * 4 lateral holes each in the turntable platform with 2 t lashing capacity each Blsdpfxel Tlhrj An Tol * 1 pair of lashing points (13.4 t) hanging at the rear left & right in front of the rear support * 4 pairs of UVV lashing rings (10 t) on each side, swiveling and lowering, loadable in all directions and recessed in the outer frame * 3 pockets for stanchions per side, with simultaneous 2 t lashing facility ----Widening package: * Hot-dip galvanized mechanical folding outriggers for 3 m overall width (not in the rear taper) * Plank holder for extensions under the chassis on the left, longitudinally ----Excavator arm rest: * Excavator arm rest above HA up to the end support, approx. 2,100 mm long and approx. 190 mm deep * 2 pairs of 6.4 t lashing points each side in the excavator arm rest ----Ramps: * Hydraulic one-piece approach ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * Outer planks of ramps made from hardwood * Steel structure prepped for 6-section control valve ----Loading height: * Loading edge unladen approx. 950 mm +/- 20 mm ----Tires: * 235/75 R 17.5 tires ----Paintwork: * Chassis, turntable, folding outriggers, mechanical supports, and approach ramps hot-dip galvanized * -- Axles, air tanks, drawbar finished in a shade of black -- ----Information: * Vehicle has a day registration in 07/2024 due to missing tire pressure monitoring system, and has not been loaded/used * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available from Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 8.850 kg, skupna masa: 11.990 kg, konfiguracija osi: 2 osi, prva registracija: 10/2018, Leto izdelave: 2018, Oprema: ABS, Prikolica v dobrem stanju. Bjdjzxvi Nepfx An Tjll Pregled je potekel, po želji lahko opravimo nov pregled, pri čemer se zaračuna dodaten strošek.

Stanje: novo, največja dovoljena obremenitev: 10.800 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic leaf springs with equalizing unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring system with in-cab display via EBS signal—no in-cab installation required * 15-pin power connector * LED lighting system, 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General Attachments: * Support winch at the front * External folding rear support legs * Plastic toolbox approx. 858 x 500 x 500 mm, front right, mounted externally on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Provision in front of the bulkhead for retrofitting container locks * Bolted 400 mm smooth steel bulkhead * Bolted rear stanchions * Side walls with spring assist Bsdpferwc R Ajx An Tjll ----Load Securing: * Perforated outer frame, angled at approx. 45°, with 2 t lashing capacity every 480 mm * Option to install 3 t drop lashing rings every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in the front and rear cross member for 1.2 t lashing points * Profifix lashing rail along the centerline for lashing capabilities up to LC 3000 daN ----Ramps: * One-piece hydraulic grating ramps, approx. 2,750 x 600 mm (can be compacted to 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump performance in the truck of over 40 l/min up to max. 140 l/min) ----Paintwork: * Chassis, drawbar, bulkhead, mechanical drop supports, and ramps hot-dip galvanized * Axles, springs, air tanks, front support winch, and flange towing eye painted in a black shade * Side wall paintwork in RAL 9010 pure white * Painting of the side walls in an RAL color of choice available at an extra charge ----Info: * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample images shown ----Delivery time: * Immediately available from Egestorf

Stanje: rabljeno, prevoženi kilometri: 1.100 km, vrsta prenosa: drugo, barva: bela, skupna masa: 32.000 kg, lastna masa: 6.600 kg, največja dovoljena obremenitev: 25.400 kg, velikost pnevmatike: 425/65R22,5, prva registracija: 03/2016, vzmetenje: zrak, voznikova kabina: drugo, Oprema: ABS, Location of vehicle: Bovenden, 2 axles, BPW axles, air suspension, liftable first axle, ABS (anti-lock braking system), underrun protection, landing legs Superstructure: Liebherr concrete mixer type HTM 1004 approx. 10m³, 2x 10t BPW axles! Suitable hydraulics for engine PTO on the tractor unit available at extra cost! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to alterations, prior sale, and errors! Bodpfx Asi Rk Axon Tjll

Stanje: rabljeno, lastna masa: 8.550 kg, največja dovoljena obremenitev: 27.450 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2021, dolžina tovornega prostora: 12.800 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 1 mm, vzmetenje: zrak, velikost pnevmatike: 245/70R17.5, barva: rdeča, Leto izdelave: 2020, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Lokacija vozila: Bovenden, 3 osi, zračno vzmetenje, 1. os dvižna, ABS (protiblokirni sistem), hidravlične rampe, zadnje podpore, podporniki. 9 t osi, bobnaste zavore, višina nalagalne površine cca 880-950 mm, razširljivo na 3.050 mm, dolžina nizkega ležišča 8.800 mm, dolžina labodjega vratu 4.000 mm, skupna masa pri 3-osnem vlačilcu 42.000 kg, nosilnost 31.290 kg, RAL 3003. PODATKI O DODATNI OPREMI SO BREZ GARANCIJE, spremembe, vmesna prodaja in napake pridržane! Bledpfx Ajzdvc Hjn Tsl

Stanje: novo, največja dovoljena obremenitev: 23.940 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profi 30.0 ----Braking System: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Parabolic springs with mechanical rear axle equalization ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment via draw spring and turnbuckle ----Lighting / Electrics: * RDÜ tire pressure monitoring * Multi-voltage system * LED tail lights 12 / 24 V * Rear removable rotating beacon * 15-pin power connector ----General Attachments: * Lateral underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front: closed plastic mudguards; Rear: straight galvanized steel skirts, each with splash guards * Tool box made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanized) for tool box in the bogie platform * Four stake pockets per side (stakes not included), also suitable for lashing ----Load Securing (La-Si package consists of): Bjdpfel Th I Ajx An Tsll * 2 lashing eyes (6.4 t) front left & right on main frame of the bogie platform * 6 pairs of UVV-certified lashing rings, foldable and lowerable, loadable in all directions, recessed into the outer frame * Corner load capacity 13.4 t, otherwise 10 t ----Widening: * 6 pairs of mechanical fold-out outriggers for max. overall width of 3 meters (except at the sloped rear) * Widening planks stored in the center of the loading area ----Ramps: * Hot-dip galvanized one-piece hydraulic drive-on ramps (approx. 3,000 x 720 mm), mechanically laterally adjustable * 4-way valve block for retrofit hydraulic lateral ramp shift ----Loading Area: * Over turntable: approx. 1,960 x 2,520 mm & unladen height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unladen height approx. 910 mm (including 860 mm drive-on slope) ----Tyres: * 235/75 R 17.5 twin tyres ----Unladen weight: * Approx. 5,980 kg unladen weight ----Paintwork: * Chassis, bogie, drawbar and drive-on ramps hot-dip galvanized * Axles, springs, air tanks etc. painted black ----Info: * Permissible gross weight technically up to 30,000 kg * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: Immediately available from Egestorf

Stanje: rabljeno, lastna masa: 8.850 kg, največja dovoljena obremenitev: 31.150 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2019, vzmetenje: jeklo, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Skupna dolžina tovorne površine pribl. 9.500 mm, dolžina tovorne površine nizkega ležišča pribl. 7.360 mm, višina nakladanja pribl. 910 mm, 14 parov pritrdilnih obročev, vozilo se prodaja po naročilu stranke. Pridržujemo si pravico do tiskarskih napak, sprememb in napak, slike so vzorčne. Več podatkov na zahtevo! Bsdpfx Anozx S Tds Tjll

Stanje: rabljeno, konfiguracija osi: 2 osi, prva registracija: 06/1990, Leto izdelave: 1990, Oprema: ABS, = Dodatne možnosti in dodatna oprema = - Dvojni pnevmatiki = Opombe = Langendorf nizkotilni prikolici z dvema osjema Langendorf nizkotilni prikolici z dvema osjema Z zračno vzmetjo S prisilnim krmiljenjem Lastna teža 9500 kg, nosilnost 24500 kg, skupna masa 35000 kg Platforma spredaj dolga 3,3 m, nizkotilna platforma dolga 5 m, platforma zadaj dolga 5 m ID št. 711 Krmilna os: Z veseljem vas pričakujemo v našem avtosalonu, kjer vam bomo svetovali, podpisali pogodbo ali vam predali vozilo. Prosimo, dogovorite se za termin. Če se ne morete odpraviti v naš avtosalon, vam ponujamo celoten postopek prek telefona/e-pošte/WhatsAppa/faksa. Po želji vam novo vozilo dostavimo neposredno na vaš naslov. To pomeni najboljšo ceno, največjo varnost in udobje pri nakupu avtomobila. Odkup Z veseljem odkupimo vaše rabljeno vozilo. Ponujamo vam možnost digitalne ocene vozila na podlagi vaših fotografij vozila, tudi brez obiska avtosalona. Naša specializirana ekipa za odkup vam ponuja zagotovljeno najvišjo ceno. Po želji vam novo »rabljeno« vozilo dostavimo neposredno na vaš naslov po vsej Nemčiji in prevzamemo vaše rabljeno vozilo. Financiranje – lizing Takojšen odobritev in prevzem obstoječega kredita. Vaš specializirani partner za osebna vozila, dostavna vozila, gospodarska vozila in gradbene stroje. ITC GmbH & Co KG Siemensstraße 7 32312 Lübbecke (industrijsko območje) Obiščite nas na naši spletni strani Stalno več kot 400 vozil na zalogi Podatki, navedeni v oglasih, na internetu, cenovnih etiketah in slikah, so nezavezujoči in ne predstavljajo zagotovljenih lastnosti. Prodajalec ne prevzema odgovornosti/garancije za tipkarske in prenosne napake. Navedena oprema je po potrebi treba dodatno preveriti s strani kupca. Naša ponudba običajno ne vključuje novega tehničnega pregleda, vendar vam z veseljem pripravimo ponudbo naše partnerske delavnice. Pridržujemo si pravico do sprememb in napak. = Dodatne informacije = Lastna teža: 10.500 kg Nosilnost: 24.500 kg Skupna masa: 35.000 kg Blsdpfxsxt S Epe An Tsl Prodajna cena: 11.999 €, 13.840 USD

Stanje: rabljeno, lastna masa: 8.800 kg, največja dovoljena obremenitev: 31.200 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/1996, dolžina tovornega prostora: 10.000 mm, širina tovornega prostora: 2.510 mm, višina nakladalnega prostora: 1 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75R17.5, barva: rdeča, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Lokacija vozila: Bovenden, 4 osi, vrtljiva gred, listnato vzmetenje, razširljiv do 3 m, pritrdilna ušesa, dvo-delne nakladalne rampe, hidravlične rampe, zadnja podpora, stranska aluminijasta zaščita, dvojne pnevmatike, škatla za orodje. Nadgradnja: 4-osna nizkopodna prikolica s hidravličnimi dvodelnimi rampami. Višina nakladanja cca 900 mm. 4x SAF osi 10t, bobnaste zavore, vlečno uho 40 in 50 mm! Dolžina zgornje ploščadi cca 2900 mm! Dolžina spodnje ploščadi cca 7100 mm! PODATKI O DODATNI OPREMI BREZ GARANCIJE, spremembe, vmesna prodaja in napake pridržane! Bljdoywvhropfx An Tjl

Stanje: novo, največja dovoljena obremenitev: 23.940 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profi 30.0 ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Parabolic springs with mechanical rear axle compensation ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment via drawbar spring & turnbuckle ----Lighting / Electrics: * TPMS Tire Pressure Monitoring System * Multi-voltage system * LED tail lights 12 / 24 V * Rear removable warning beacon * 15-pin power connector ----General Equipment: * Side underrun protection * Rear swing-down support legs on chassis frame * Mechanically adjustable warning panel kits front and rear * VA closed plastic mudguards in front and straight galvanized steel skirts at the rear, each with spray protection * Tool box made of galvanized steel sheet - black powder-coated - approx. 650 x 300 x 600 mm * Folding lid (hot-dip galvanized) for the toolbox in the turntable platform * Four stake pockets per side (stakes not included), also with lashing function ----Load Securing (La-Si package consisting of): * 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform * 6 pairs of UVV folding and retractable lashing rings, loadable in all directions and countersunk into the outer frame * 13.4 t at corners, 10 t otherwise ----Widening: * 6 pairs of manual folding outrigger arms for 3 m overall width (not on the sloped rear section) * Widening boards stowed in the center of the loading area ----Ramps: * Hot-dip galvanized one-piece hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-way hydraulic control unit pre-installed for optional hydraulic side shift of ramps ----Loading Area: * Over turntable: approx. 1,960 x 2,520 mm & unladen height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unladen height approx. 910 mm (incl. 860 mm entry incline) ----Tyres: * 235/75 R 17.5 twin tyres ----Unladen weight: * Approx. 5,980 kg unladen weight Bedpfjl Th Nnsx An Toll ----Finish: * Chassis, turntable, drawbar and loading ramps hot-dip galvanized * Axles, springs, air tanks etc. painted black ----Information: * Permissible total weight of 30,000 kg technically possible * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Immediately available ex stock Egestorf

Stanje: novo, lastna masa: 3.210 kg, največja dovoljena obremenitev: 8.690 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.000 mm, širina tovornega prostora: 2.000 mm, vzmetenje: drugo, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Višina nakladalne platforme: 590 mm, tla iz jeklene profilirane pločevine s povečano nosilnostjo, 2 x rampe (dolžina 2.600 mm x širina 950 mm), 10 pritrdilnih točk (2 t) na zunanjem okvirju, 8 pritrdilnih ojačevalnih elementov (5 t) v kotih, menjalniška oporna vitlica z možnostjo nadzora obremenitve in hitrega dviga, spredaj, 2 zložljivi oporni nogi, zadaj, podvozje in nadgradnja pocinkana, doplačilo za oporno stojalo za rezkalni trak 600 €, na zalogi tudi različica z mehanskimi rampami!, -- Pridržujemo si pravico do sprememb, napak in tiskarskih napak, ilustrativne slike --, več podatkov na: !, Več podrobnosti: ! Blsdozw Aluepfx An Tjl

Stanje: rabljeno, konfiguracija osi: 2 osi, skupna dolžina: 10.800 mm, skupna širina: 2.550 mm, skupna višina: 3.700 mm, Leto izdelave: 2007, Lastna masa: 7.100 kg Nosilnost: 23.900 kg Bedpfoza Afuox An Tell Dovoljena skupna masa: 31.000 kg

Stanje: rabljeno, lastna masa: 3.590 kg, največja dovoljena obremenitev: 10.810 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 06/2020, širina tovornega prostora: 5.040 mm, višina nakladalnega prostora: 2.420 mm, vzmetenje: jeklo, velikost pnevmatike: 285/70R19,5 150J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 285/70R19,5 150J, velikost zadnje pnevmatike: 285/70R19,5 150J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, spredaj za natovarjanje, pritrdilne zanke, –, dodatno plačilo za rampe 1.000 €, –, tiskarska napaka, napake in spremembe pridržane, vzorčne slike –, več informacij na: !, več podrobnosti: ! Bjdjzxcvcopfx An Tell

Stanje: novo, največja dovoljena obremenitev: 37.619 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.240 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 3.570 mm, Leto izdelave: 2026, Oprema: ABS, Kässbohrer K.SLS 3 / 0N ? 18/30 | Year of Manufacture: 2025 | NEW | 40-t ramps | Top equipment Location: Germany Condition: New / unused Availability: Immediate Description: For sale: brand new Kässbohrer K.SLS 3 / 0N ? 18/30 low loader, year of manufacture 2025. Perfect for transporting construction machinery, equipment, and heavy goods. Robust chassis, high-quality axles, heavy-duty ramps – ready for immediate use. --- Technical Specifications Dimensions - Total length: 13,190 mm - Platform length: 9,240 mm - Platform height: 875 mm - Overall width: 2,550 mm (extendable by +600 mm with side extensions) - Gooseneck length: 3,950 mm - Unladen weight: approx. 10,381 kg Weights - Perm. total weight at 80 km/h: 48,000 kg - Perm. total weight at 60 km/h: 52,800 kg - Total axle load: 30,000 kg - King pin load: up to 18,000 kg --- Running Gear & Axles - 3 BPW axles, air suspension, drum brakes - 1 rear trailing axle - Lift axle (load-dependent + automatic control from the cab) - Tyres: 245/70 R17.5, M+S + 3PMSF - Tire pressure monitoring R141 - Wabco EBS 4S/3M, ABS + RSS - Wabco Smartboard (axle load, suspension, diagnostics, etc.) --- Ramps & Loading Area - Foldable 40-t drive-on ramps - Ramp length: 2,750 mm - Ramp width: 850 mm - Hydraulic sliding system - 45-mm hardwood floor + checker plate over wheel arches --- Load Securing - Multiple lashing points, 8,000 daN and 13,400 daN - 7×2 stake pockets + plug-in stakes - Container locks for 1×20 ft - Front board 450 mm, side & rear walls made of aluminium --- Body & Chassis - High-strength S700 MC steel - Partial metallisation (Zn/Al 85/15) – superior corrosion protection - Rear angle: 10°, 500 mm - 2" king pin - Mechanical support legs at the front - 45-t rear supports --- Equipment - 2× toolboxes - Rotating beacon - LED lighting Bedpfxox Efzue An Tjll - Reverse work lights - Wheel chocks - Extensions 9×2 (up to +300 mm) - Stake box - Reflective strips on sides and rear --- Colour: RAL 3020 traffic red For further information, please feel free to contact us.

Stanje: novo, največja dovoljena obremenitev: 14.904 kg, skupna masa: 20.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 1.050 mm, Leto izdelave: 2026, Oprema: ABS, WhatsApp HÜFFERMANN HAP 20.72 MultiCarrier Full Option, Arc-Galvanized!!! Equipment: Permissible gross weight: 18 t Technical gross weight: 20 t Unladen weight: approx. 5,096 t (+/- DIN tolerance) Dimensions Frame length: approx. 7,200 mm, internal container length: 6,000 – 7,000 mm + wheeled vehicles Total width max. 2,550 mm Container support height (in driving position): approx. 950 mm Type HPA 2072, twin tires Welded steel frame construction made from high-strength S700 steel Chassis configured for rear loading Load securing with pneumatic low-tension locking system with 4 claws, Clamping force 2.5 t per claw, operation at the trailer on the left side (direction of travel) 1 plug-in roller stop as a variable container stopper Integrated lashing rail on the outer frame for bolted lashing rings 6 pairs of lashing points in the front area of the outer frame Beveled approach at the rear with ramp storage compartment incl. steel plate cover Low-maintenance, sealed slewing ring Hook-in rail for aluminum drive-on ramps (WITHOUT RAMPS) 2 pairs of 5 t lashing rings mounted at the front on the platform, recessed in the rear floor 8 pairs of bolted 3 t lashing shackles on the outer frame, spaced approximately evenly Coupling Equipment Extendable drawbar, adjustable in 6 x 100 mm steps, with 40 mm DIN towing eye, straight eye, D-value 125 kN, for twin-tire chassis Drawbar retaining spring with tensioner Truck coupling height from 635 mm to 835 mm Drawbar length: 2,000–2,600 mm BPW EcoPlus low-loader axles with drum brakes, S-cam brakes 300/200 mm, axle load 10 t/axle, 17.5" Z tires, automatic brake adjusters 8 tires 235/75 R 17.5, 141J 8 steel rims 6.75 x 17.5, offset, silver Black plastic wheel nut caps Brake system complies with ECE Regulation R13 Two-line air brake system Brake system manufacturer: Wabco EBS system 4S3M, sensors on 1st and 2nd axle Electronic brake and stability system EBS-E and RSS or TEBS G2 and RSP Spring-loaded parking brake on 2nd axle Aluminium air tanks Brake/air connection lines with Duomatic quick couplers EBS/ABS connection cable Mount for EBS and electrical connectors at the coupling Air suspension with lift and lower function, operated separately front and rear via 2 rotary lever valves Automatic adjustment to programmed driving height above 15 km/h Schwarzmüller Intelligent Telematics Weight detection/axle load indication via EBS CAN bus signal for display in cab (truck must be prepared accordingly, not a calibrated scale) Tire pressure monitoring system according to ECE regulation 141, with pressure sensors in the wheels Acoustic reversing warning system/alarm, activated by reverse gear 24-volt lighting system according to ECE Regulation R48 Full LED multifunction tail lights "Aspöck EcoLED III" LED position lights at the front LED outline marker lights at the rear LED side marker lights, controlled via indicator signal LED license plate lights Connection cable 1 x 15-pin 2 LED work lights, mounted left and right under the outer frame 2 LED reversing lights, mounted rear left and right 7-pin socket at the rear Paintwork Shot-blasted, arc-galvanized, epoxy primer, final coating with 2K topcoat using electrostatic process Material doublings and transitions treated with cavity wax Blsdpfsyh Sl Dox An Tel Chassis: RAL 9005 deep black Load securing elements: RAL 1003 signal yellow Drawbar/tow tube in drivi