Fliegl Sds350 3 Achs Sattelauflieger nakup rabljenega (38.300)

Stanje: rabljeno, lastna masa: 7.375 kg, največja dovoljena obremenitev: 27.625 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2012, dolžina tovornega prostora: 13.650 mm, vzmetenje: zrak, velikost pnevmatike: 385/65R22,5 160J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 385/65R22,5 160J, velikost zadnje pnevmatike: 385/65R22,5 160J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, Lash pockets, -- Errors in printing, mistakes, and changes reserved, sample images --, More data at: !, More details: ! Nodpfsy E H N Njx Aibsla

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 06/2024, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.680 mm, Day registration in 06/2024 due to the new TPMS regulation. Chassis: Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin Outer frame slightly angled with 'Load-Lock profile' for lashing strap attachment 24 t, 2-speed landing gear, single-sided operation Side underrun protection, aluminum Rear underrun protection, galvanized steel Quarter-shell mudguards in front of and behind axle assembly With anti-spray mud flaps compliant with EU regulations Rear impact protection Spare wheel holder for 1 spare wheel, with wheel fixing kit Axles & Suspension: SAF disc brake axles with 430 mm disc diameter 'Axles/chassis laser alignment' reduces tire wear and fuel consumption Nljdpjri Hihjfx Aibsa 1st axle automatic lift axle, additionally electrically operable from the truck Includes forced lowering and start-up aid, no installation required on truck Brake System: 2-line compressed air braking system Spring-loaded parking brake EBS by Wabco, electronic braking system with EBS socket at the front, without connection cable With raise & lower valve + auto-reset function Vehicle stability control system Axle load detection via EBS CAN bus signal, display via monitor Wheels and Tires: 385/65 R22.5" / 6 steel rims, factory silver Electrics: 24 volt, multi-chamber lights, side LED marker lights (amber) 2 white LED position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin and 1 x 15-pin foolproof sockets at the front, without connection cable 2 additional LED work lights at the rear, controlled via reverse light Floor: Approximately 30 mm thick phenolic plywood, mounted on continuous longitudinal beams for high point load capacity, suitable for forklift axle loads up to max. 7100 kg at the bulkhead Drop-in Slats: 5 rows of aluminum V-insert slats 2 pairs of Vario steel slats, in conjunction with Vario beams for fore and aft load securing (then no insert slats required in the area of the steel slats) Rear Portal Doors: Double-winged, each with 2 internal lock rods. Tarp with welded horizontal and vertical belts Unladen weight: 5,960 kg Offer and pictures non-binding

Stanje: rabljeno, Funkcionalnost: omejena funkcionalnost, lastna masa: 6.575 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 07/2011, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 1.300 mm, skupna dolžina: 13.650 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65R22,5, stanje pnevmatik: 30 odstotek, medosna razdalja: 1.360 mm, Leto izdelave: 2011, Oprema: ABS, Rabljen odprt polpriklopnik Nlsdpfxsy Ercbs Aiboa Jeklena sprednja stena z izbočenjem za dolge jeklene profile Tla okrepljena z jeklenimi profili Stranski žepki za stebričke Skladiščna škatla za vstavljive stebričke

Stanje: rabljeno, lastna masa: 6.520 kg, največja dovoljena obremenitev: 23.480 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2019, dolžina tovornega prostora: 8.610 mm, vzmetenje: zrak, velikost pnevmatike: 235/75R17,5 ---/140J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75R17,5 ---/140J, velikost zadnje pnevmatike: 235/75R17,5 ---/140J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Low-bed loading area length approx. 6.50 m, total loading area length approx. 8.60 m, loading height approx. 900 mm. This vehicle is being offered on behalf of a bank. -- Subject to typographical errors, mistakes, and changes. Sample images -- More data at: ! Nledpey E H E Defx Aiboa More details: !

Stanje: novo, konfiguracija osi: 3 osi, barva: sivo-črna, vrsta prenosa: mehanski, Colour: Natural, lift axle, electronic braking system (EBS), 1x 15-pin connection plug. Equipment: Slightly beveled new-design outer frame with “Load-Lock Profile” for lashing straps, 13 additional pairs of lashing rings in the outer frame, each rated 5 t for a total of 24 t. Two-speed landing gear, single-sided operation, with semi-circular lower section and straight forklift underrun protection made of steel on the outer frame (sides and rear). One spare wheel carrier for one single wheel, with wheel fastening kit. 1 plastic toolbox (650 mm x 520 mm x 670 mm). 7 pairs of drop-in stake pockets (83 x 83 mm) integrated into the outer frame. SAF disc brake axles with 430 mm air suspension. First axle is an automatic lift axle, including forced lowering and starting aid, activated with third brake circuit. Wheels and tires: 6 x 385/65 R22.5, brand manufacturer; 6 steel rims, factory silver. Flooring: approx. 30 mm phenolic plywood, cross joints with Omega insert for high point loading, forklift axle load up to max. 7,100 kg. Front wall / corner posts: 25 mm aluminium hollow profile, 1,950 mm high; steel corner posts in high-volume version plus 2 center supports as “Crash Blocker” (mounted inside lower area at approx. 140 mm). Sideboards: 25 mm aluminium hollow profile, 700 mm high. Paintwork: chassis hot-dip galvanized including passivation ("15-year anti-corrosion warranty"). Aluminium sideboards anodized. Subject to errors and changes. Nledpfx Aiotcwmiebsa

Stanje: rabljeno, največja dovoljena obremenitev: 28.560 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2023, naslednji pregled (TÜV): 03/2026, dolžina tovornega prostora: 12.032 mm, širina tovornega prostora: 2.352 mm, višina nakladalnega prostora: 2.698 mm, prostornina tovornega prostora: 68 m³, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 2023, Oprema: ABS, FLIEGL 3-axle fixed container chassis with 40 FT high-cube container First registration: 2023 Permissible total weight (technical): 38,000 kg Chassis unladen weight: 3,640 kg High-cube container unladen weight: 5,800 kg SAF axles with large 430 mm disc brakes 1st axle: LIFT AXLE with start-up aid with vehicle driving stability system Axle load detection Tyres: 6 x 385/55 R 22.5 Nljdpfx Aievzk Naeboa 40 FT high-cube container, right side wall with multiple wing doors (can be opened), door dimensions L 2,340 x W 2,585 mm Rear portal doors Internal dimensions (LxWxH): 12,032 x 2,352 x 2,698 mm Volume: 68 m³ 25 Euro pallets Accessible with pallet truck and forklift Condition: grade 1-A RENTING is the new BUYING – also available from us as a full-service rental.

Stanje: rabljeno, lastna masa: 5.905 kg, največja dovoljena obremenitev: 33.095 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2024, naslednji pregled (TÜV): 04/2026, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.800 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5, Leto izdelave: 2024, Oprema: ABS, Nemško vozilo Kot novo, prevoženih le cca 30.000 km Prva registracija: 6.5.2024 Fliegel SDS 390 Roadrunner Skupna masa: 39.000 kg Lastna masa: 5.905 kg Nosilnost: 33.095 kg BPW osi I-Lock Nodpfx Aoynkiksibela Blitz ponjava Velikost pnevmatik: 385/65 R 22,5 Ponjava z napisi, fotografije so retuširane Možne dodatne storitve! Izvozne registrske tablice (rdeče / 30 dni) Nemčija Kratkotrajne tablice (rumene / 5 dni) Nemčija Prevozna dovoljenja Avstrije je možno posredovati Dostava vozil (za doplačilo) Podatki na spletu so nezavezujoči opisi in ne predstavljajo jamčenih lastnosti. Prodajalec ne odgovarja za napake, vnosne ali prenosne napake podatkov. Prodaja vmes mogoča. Prodaja samo poslovnim uporabnikom. Veljajo izključno naši splošni pogoji.

Stanje: novo, največja dovoljena obremenitev: 18.400 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 5.900 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 860 mm, skupna širina: 2.520 mm, Total weight: 24,000kg / 30,000kg Unladen weight: 5,600kg Payload: 18,400 / 24,400kg Overall length: 10,290mm Loading length: 5,900mm incl. rear bevel Width: 2,520mm Loading height: 860mm Further information: plus pre-carriage / provision ex storage location 26639 Wiesmoor: €1,280.00 / net Chassis Low-bed trailer Steel welded construction Turntable with robust ball bearing ring Rear support, foldable 2 wheel chocks with holders Rear splash guards full width (not in combination with forklift holder) 1 plastic toolbox, width=600 / height=425 / depth=460 mm, lockable Prepared for widening to 3,000 mm (holes in outer frame with covers, not in the rear bevel) Tie-down points low loader 1 pair of lashing cutouts recessed in front longitudinal member on cranked section, each rated 10 t 7 pairs of lashing mushrooms recessed at the top and side in the outer frame, each 10 t 1 x at the front on the cranked section 5 x in the low-bed 1 x in the rear bevel 12 pairs of lashing holes in the outer frame, each rated 5 t (for lashing strap hooks) 5 x cranked section, 6 x low-bed and 1 x rear bevel Nljdpfxeynvrwe Aibea Drawbar equipment Turntable trailer Drawbar with certified 40 mm towing eye Drawbar height adjustment by spring Axles + Suspension Drum brake axles by manufacturer’s choice "Axles / chassis laser aligned" reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker balancing) Wheels and Tires 235 / 75 R 17.5" by manufacturer’s choice Steel twin rims, factory silver Braking system 2-line air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at front, with extension lines to engine vehicle, extension approx. 60 cm Without ABS, but with mechanical ALB, thus max. 60 km/h permitted Electrics 12 volts, multi-chamber lights, without lateral yellow LED lighting, side reflectors 2 white position lights front 2 white/red lane marker lights rear 1 x 7-pin 12V plug front, with extension cable approx. 60 cm 1 LED beacon with bracket, switched via sidelights (removable light) 2 pairs warning plates illuminated, extendable to 3,000 mm Floor Cranked section front with steel/chequer plate covering Stow box recessed in transition bevel to cranked section then approx. 70 mm softwood floor, in wheel arch area steel/chequer plate Rear bevel with 70 mm softwood floor Low-bed loading area incl. rear bevel 5900 mm Ramps Steel ramps approx. 3000 mm long, 750 mm wide, side-shiftable with timber covering (front area with steel/chequer plate) Hydraulic via tractor auxiliary drive with restrictor, operation side FR left Hydraulic connection with SVK plug NW 10/3 incl. connector hose Operating notes At 10,000kg axle load, an exemption permit is required, only indivisible loads permitted! The indicated total weight is technically possible; depending on the cargo, the permissible axle, support, and kingpin loads may not be reached (poor handling and tracking possible if load distribution is incorrect) Country of registration / plates Country of registration: Germany With Dekra approval and certificate, for max. 60 km/h registration, towing vehicle agricultural/forestry, (country of registration Switzerland max. 40 km/h possible) prepared for double-line license plate holder without outline marking / reflective strips according to ECE R 048, Paintwork Frame hot-dip galvanized incl. passivation "15 year warranty against penetra—"

Stanje: rabljeno, največja dovoljena obremenitev: 31.410 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2021, naslednji pregled (TÜV): 08/2026, prostornina tovornega prostora: 92 m³, skupna širina: 2.550 mm, Leto izdelave: 2020, Oprema: ABS, Celoten naš vozni park z vozili, ki so na voljo takoj ali v kratkem času, najdete na naši spletni strani. Izvleček opreme. Celoten seznam opreme je na voljo na zahtevo. - 3 x SAF osi - Kolutne zavore - 1. os z avtomatskim dvižnim mostom - Zračno vzmetenje - 24 t, dvostopenjska podporna noga, enostransko upravljanje - Izvlečna lestev zadaj - Plastična orodna skrinja s predalom in vmesno polico - Dvocevni pnevmatski zavorni sistem, EBS/ABS Njdew Tpr Uopfx Aibela - Pnevmatske gume 385/55 R22.5 - Pomikajoča tla Cargo Floor, približno 10 mm talni profil - Zadnja stena iz aluminijastih votlih profilov, dvokrilna vrata - LED delovne luči - Barvanje okvirja v DB 7350 Novagrau - Barvanje kesona v RAL 7035 svetlo sivo - Ponjava v barvi podobni RAL 3002 karmin rdeča

Stanje: novo, največja dovoljena obremenitev: 18.400 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 5.900 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 860 mm, skupna širina: 2.520 mm, Total weight: 24,000kg / 30,000kg Curb weight: 5,600kg Payload: 18,400kg / 24,400kg Overall length: 10,290mm Loading length: 5,900mm incl. rear bevel Width: 2,520mm Loading height: 860mm Additional information: Plus pre-carriage / handling from storage location 26639 Wiesmoor: €1,280.00 net Chassis: Low-bed trailer Steel welded construction Turntable with heavy-duty ball race bearing Folding rear support Wheel chocks with holder Rear mudflaps across full width 1 plastic toolbox Preparation for widening to 3,000 mm (holes in outer frame with covers, not in rear bevel) Lashing rings for low-bed trailer 1 pair of lashing openings in the front beam on the cranked section, each rated 10 t 7 pairs of lashing pins recessed in the top and side of the outer frame, each rated 10 t 1 x in front on the cranked section 5 x in the low-bed section 1 x in the rear bevel 12 pairs of lashing holes in the outer frame, each rated 5 t (for securing straps) 5 x cranked section, 6 x low-bed, 1 x rear bevel Drawbar coupling (for turntable trailer) Drawbar with tested 40 mm towing eye Height adjustment of drawbar by spring Axles & suspension: Drum brake axles, manufacturer’s choice Laser axle/chassis alignment – reduces tire wear and fuel consumption Parabolic spring suspension with maintenance-free steel-rubber bushing and mechanical load equalization (rocker equalizer) Wheels and tires: 235 / 75 R 17.5” manufacturer’s choice Steel rims, dual arrangement, factory silver Brake system: 2-line compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connecting lines to the tractor unit, lines extended by approx. 60 cm Without ABS, but with mechanical ALB; maximum approved speed 60 km/h Electrics: 12 Volt, multi-chamber lights, no side LED (yellow) lighting, reflectors on side 2 white position lights at front 2 white/red marker lights at rear 1 x 7-pin 12 Volt plug at front, with connection cable, extended by approx. 60 cm 1 LED beacon with holder, switched via sidelights (lamp removable) 2 pairs of warning plates, double LED illuminated and extendable to 3,000 mm Floor: Cranked section at front with steel / checker plate covering Stowage box recessed in the ramp transition near the cranked section Then with 70 mm softwood flooring, steel / checker plate in the wheel arch area Rear bevel with 70 mm softwood floor Low-bed area incl. rear bevel 5,900 mm Ramps: Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Wood covering (front edge with steel/checker plate) Hydraulically operated via tractor PTO with throttle, operation LH side compartment Hydraulic connection with SVK plug NW 10/3, incl. hose Operating notes: For 10,000 kg axle load, a special permit is required, only indivisible loads allowed! The stated total weight is technically possible; depending on the load, it may not be possible to achieve total weight while complying with permissible axle, support, and kingpin loads. (Poor driving and tracking performance possible due to incorrect load distribution) Nedpewlmr Dofx Aibsla Country of registration / Signs: Registration country: Germany With Dekra inspection and certificate, for max. 60 km/h approval, towing vehicle LoF (agricultural/forestry), (Switzerland max. 40 km/h approval possible) Prepared for double-line license plate holder Without contour marking / reflective tape per ECE R 048 Paintwork: Frame RAL 7021, black-grey "10 years warranty against rust-through" Drawbar hot-dip galvanized Ramps hot-dip

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33802032235, lastna masa: 4.983 kg, največja dovoljena obremenitev: 33.017 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2022, naslednji pregled (TÜV): 12/2025, vzmetenje: zrak, velikost pnevmatike: 385/55 R22.5", barva: svetlo zelena, Leto izdelave: 2022, Chassis Semi-Trailer for Containers Fine-grained steel welded construction, fifth wheel plate with replaceable 2" kingpin and two kingpin positions Container mounts: rear extension retracted: 1 x 20 ft or 1 x 30 ft flush with the rear New locking positions for improved fifth wheel load on 20" containers flush at rear Rear lights protected and recessed into the rear end Mid telescope 1st stage, rear extension extended 1st stage: 2 x 20 ft or 1 x 40 ft without gooseneck tunnel Mid telescope 1st stage, rear extension extended 1st stage: 1 x 40 ft with gooseneck tunnel Mid telescope 2nd stage, rear extension extended 2nd stage: 1 x 45 ft with gooseneck tunnel and overhanging to the rear Mid telescope 2nd stage, front extension extended 1st stage, rear extension extended 2nd stage: 1 x 45 ft with long gooseneck tunnel and chamfered corners Mid telescope as integrated central tube frame with pin locking Transport of filled tank containers is excluded. With rear height adjustment in galvanized version and foldable middle supports for containers without tunnel Plug-in front container guide Front cross member with Vario V3+ New Generation locking system Front extension mounted on rollers, manually extendable (for 45" container with long tunnel) Rear extension mounted on rollers, with manual hand crank 24 t 2-speed landing gear, single-sided operation, with straight base, without equalization 2 wheel chocks with holders Side impact protection, aluminium Underrun protection, galvanized steel Extendable underrun protection for 45 ft containers Rear splash guard full width (not in combination with forklift bracket) Half-shell mudguards Njdsww Iczjpfx Aibela With anti-spray mud flaps according to EC Rear bump guard Spare wheel holder for 1 wheel incl. attachment kit 1 toolbox for fire extinguisher up to 6 kg 1 fire extinguisher (ABC powder, 6 kg)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902027997, lastna masa: 6.832 kg, največja dovoljena obremenitev: 28.168 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2021, dolžina tovornega prostora: 13.460 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.740 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5", barva: črn, These images are archive photos; the vehicle may still be in use! Equipment details available on request. Nledowk Dg Njpfx Aibea

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902024321, lastna masa: 5.765 kg, največja dovoljena obremenitev: 29.235 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2018, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.470 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5", barva: črn, The images are for reference only; the vehicle may still be in use. Nledpfxjwk Dk Ie Aibja Equipment details available upon request!

Stanje: novo, največja dovoljena obremenitev: 29.500 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 1.450 mm, prostornina tovornega prostora: 25 m³, skupna širina: 2.550 mm, Vehicle is from current production - available in approx. 2 weeks Vehicle / Body: Tipping Trough Gross Weight: 35,000kg / 39,000kg Unladen Weight: 5,500kg !!! Payload: 29,500kg / 33,500kg Total Length: 8,600mm Volume: 25 cbm Further Information: - Overall height approx. 3,160mm - Internal width approx. 2,350mm - Coupling height approx. 1,200mm Chassis – Semi-Trailer Tipper: - Fine-grained steel welded construction, basic lightweight design - 1x centre support leg - Folding underrun protection - Underrun protection with "spring assistance" for easier operation Nodpfxsvhyf Ro Aibsla - Half-shell mudguards - Integrated “mudguard holder” with a stone-repellent surface - With antispray mud flaps only on the rear axle - 2 towing hooks at the rear Axles & Suspension: - SAF disc brake axles with 430 mm disc diameter - “Axle/chassis laser measured" for reduced tyre wear and fuel consumption - Axles in off-road specification - Air suspension - Air bag pressure gauge, mounted front on curved chassis - 1st axle is an automatic lift axle, also electrically operable from the truck, including forced lowering and start-off assist, without truck installation (start-off assist is functional up to 30% axle overload and up to a max. speed of 25 km/h) Braking System: - 2-line compressed air brake system Coloured line routing for easy servicing. - Spring-actuated parking brake - 2 front foolproof coupling heads, without connecting line - 24 volt EBS, Electronic Braking System with EBS socket at the front, without connection cable - With raise & lower valve - Vehicle stability control system - Automatic tip lowering with shut-off valve Wheels and Tyres: - 6 x 385/65 R22.5" European brand, manufacturer’s choice Electrics: - 24 volt, multi-chamber LED lights, side yellow LED marker lights, number plate illumination in LED (Note: with some tractors, diagnostic errors may occur even though functions are correct) Side yellow LED lighting linked with indicator - "flashing side marker lights" - Premium LED side marker lamps, each with 20 LEDs per unit - 2 white front position LED lights included - 2 white/red lane control rear LED lights included - 2 x 7-pin and 1 x 15-pin foolproof sockets at the front, no connection cables - LED working lights mounted on both sides (activated via reverse light) - 2 additional LED work lights recessed at rear Hydraulics: - High-pressure cylinder max. 250 bar, smallest stage hard chromed, with HDK screw coupling, fixed part, NW 48 mm - Hyva make - Operated hydraulically via truck PTO - Hydraulic connection with hose and vehicle plug NW = 54 mm with large wing nut Tipping Body: HARDOX steel round trough in “Stone Master Design” of highly wear-resistant HB 400/450 steel. Inclined front wall with external hydraulic cylinder mount. Interior with ladder at front wall - Greenline – conical, aerodynamic body design - Shovel and broom holder on exterior front wall - "Membrane" tailgate - Tailgate as pendulum flap with "double-joint hinge", externally mounted with dual hook lock. 2 clamping bolts with toggle locks at the bottom on each side - Tailgate with rubber seal Note: Heat-resistant up to max. 170°C! - Continuous sidewalls 4 mm thick, floor 4/5 mm thick, wear- and weight-optimised structure - Fliegl S.T.E.P. – swivelling platform at front with folding ladder for side access LH side,

Stanje: novo, največja dovoljena obremenitev: 17.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.670 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 860 mm, skupna širina: 2.520 mm, From ongoing production Nlodpeuytx Sofx Aibsa Gross weight: 24,000 kg / 30,000 kg Unladen weight: 6,100 kg Payload: 17,900 kg / 23,900 kg Overall length: 10,890 mm Loading length: 8,670 mm total, 2,520 mm gooseneck, 6,500 mm loading deck Width: 2,520 mm Loading height: 860 mm Additional information Steel welded construction Turntable with heavy-duty slewing ring Foldable rear supports Wheel chocks with holder Aluminum side underrun protection Full-width rear spray flap (not compatible with forklift holder) Half-shell mudguards on 1st axle with anti-spray flaps Anti-spray flaps behind 2nd and 3rd axles Plastic toolbox Extendable width up to 3,000 mm Storage compartment for timber planks positioned centrally on the loading area 70 mm timber planks for widening to 3,000 mm Tie-down points for low-loader 1 pair of lashing cut-outs in the front longitudinal beam on the gooseneck, each 10 t 4 pairs of lashing holes on the outer frame of the gooseneck, each 5 t (for attaching tension belts) 7 pairs of lashing mushrooms flush-mounted on top and on the sides of the outer frame, each 10 t 1 in front on the gooseneck, 6 in the low-bed Pairs of ring lashings flush-mounted in the outer frame, each 5 t (can be converted to stake pockets) Additional pairs of folding lashing points, each 10 t 1 on the gooseneck 1 recessed in the floor behind the last axle Drawbar equipment for turntable trailer Drawbar with certified 40 mm towing eye Drawbar height adjustment via spring Axles and suspension Drum brake axles, manufacturer’s choice “Axle/chassis laser alignment” for reducing tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker balancer) Wheels and tires 235/75 R 17.5" manufacturer’s choice Steel twin wheels, factory silver Braking system Dual-line compressed air brake system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connector lines to the tractor unit 24 V ABS and ALB, with ABS plug at the front and connecting cable Electrics 24 V, multi-chamber lights, yellow LED side marker lights 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pole fail-safe plugs at the front, with connecting cable LED beacon with holder, switched via parking light (removable beacon) Pair of double warning boards, LED-illuminated and extendable to 3,000 mm Floor Gooseneck at front with steel/chequer plate decking Storage compartment recessed into the transition slope to the gooseneck Then approx. 70 mm softwood floor, in wheel arch area with steel/chequer plate decking Rear bevel with 70 mm softwood floor Low bed area including rear bevel 6,500 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Additional lower ramp safety (prevents lateral slippage of ramps, not compatible with side hydraulic ramp adjustment) Wooden covering (tip area with steel/chequer plate) Hydraulic operation via tractor PTO with restrictor, operation on driver side left Hydraulic connection with SVK plug NW 10/3, incl. connection hose Paintwork Frame hot-dip galvanized including passivation Access ramps hot-dip galvanized plus freight / provision ex works 26639 Wiesmoor: €1,280.00 net

Stanje: novo, največja dovoljena obremenitev: 17.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.670 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 860 mm, skupna širina: 2.520 mm, New vehicle: Fliegl 3-axle low-loader trailer with ramps, model DTS 300 Vehicle fully hot-dip galvanized Gross weight: 24,000kg / 30,000kg Unladen weight: 6,100kg Payload: 17,900 / 23,900kg Overall length: 10,890mm Loading length: total 8,670mm; 6,500mm low bed including rear bevel / 2,170mm gooseneck Width: 2,520mm Loading height: 860mm Further information: plus freight/preparation ex stock location 26639 Wiesmoor, EUR 1,280.00 net Leasing offer: Term 48 months, down payment only the VAT. Residual value 40% Monthly installment: EUR 569.00 Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support Wheel chocks with holders Aluminum side underrun protection Full-width rear mudflaps (not in combination with forklift mounting) Semi-shell fenders on 1st axle with anti-spray mudflaps Anti-spray mudflaps behind 2nd and 3rd axles 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Extendable outriggers to 3,000 mm (not at rear bevel). (Track width of construction machinery or vehicles to be transported must not exceed outer frame width of 2,550 mm) Central storage compartment for wooden planks on the loading area 70 mm wooden planks for extension to 3,000 mm Lashing points for low-loader 1 pair of lashing cutouts in the front longitudinal beam on the gooseneck, each 10 t 4 pairs of lashing holes in the outer frame of the gooseneck, each 5 t (for attaching tie-down straps) 7 pairs of inlaid lashing rings on top and side of outer frame, each 10 t (1 at gooseneck front, 6 in low bed) First lashing ring 250 mm from front and last max. 250 mm from rear, lashing point spacing not greater than 1,100 mm 5 pairs of inlaid ring lashing points in outer frame, each 5 t (convertible to stake pockets) 2 additional pairs of foldable lashing rings, each 10 t (1 at gooseneck - protruding, 1 recessed in floor behind last axle) Drawbar assembly for turntable trailer Drawbar with certified 40 mm towing eye Drawbar height adjustment via spring mechanism Nedpfx Aisv D T R Esbjla Axles & Suspension Drum brake axles, brand per manufacturer’s choice Axle/chassis laser alignment to reduce tire wear and fuel consumption Air suspension with raise & lower valve Wheels and tires 235/75 R 17.5'', per manufacturer’s choice Steel twin wheels, factory silver finish Braking system Dual-line compressed air brake system Spring-operated parking brake Vehicle stability control system Axle load detection via EBS-Canbus signal for display in cab (truck must be pre-equipped, not installed/no certified scale) 2 non-interchangeable coupling heads at front with connection lines to tractor unit 24V EBS, electronic braking system with EBS connector at front and connecting cable Note: The trailer may only be towed by towing vehicles that ensure proper ABS function! Electrics 24V, multi-chamber lights, side yellow LED lighting 2 white position lights at front 2 white/red lane control lamps at rear 2 x 7-pin non-interchangeable connectors at front, with connection cable 1 LED revolving beacon with holder, switched via parking light, removable 2 pairs of warning panels, double LED-lit and extendable to 3,000mm Floor Gooseneck front with steel/chequer plate cover Storage compartment recessed in gooseneck ramp Subsequent area with approx. 70 mm softwood floor, wheel arch area with steel/chequer plate Rear bevel with 70 mm softwood flooring Low-loader platform including rear bevel: 6,500mm Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, side mounted

Stanje: novo, največja dovoljena obremenitev: 26.100 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, Vehicle / Body: Low-bed semi-trailer First registration: New vehicle Gross weight: 35,000 kg / 47,000 kg Unladen weight: 8,900 kg Payload: 26,100 kg / 38,100 kg Overall length: 13,300 mm Loading length: 9,200 mm Width: 2,520 mm Loading height: 900 mm Further information Chassis: Low-bed semi-trailer Steel welded structure, fifth wheel plate with replaceable 2" king pin and two king pin positions (not in combination with forced steering) 24 t 2-speed landing gear, single-sided operation, with straight lower part, without thrust compensation Rear support foldable 2 wheel chocks with holders Side underrun protection, aluminium Full-width rear mudflap Mud flaps with anti-spray in front of the 1st axle and behind each axle, in accordance with EU regulations 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Extendable width to 3,000 mm (not at the rear taper) (Note: The track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Compartment for wooden planks on neck, transverse at front 70 mm wooden planks for extension to 3,000 mm Excavator arm recess over rear axles, extending to the rear, approx. 3,000 mm long, 650 mm wide, and 230 mm deep 2 pairs of lashing holes, each rated 5 t, in the excavator arm recess on side of main frame, approx. 300 mm from front and some 200 mm before rear taper Lashing points low-loader Nlodsut Idnspfx Aiboa 11 pairs of lashing mushrooms, integrated top and side of the outer frame, each 10t 2x on gooseneck 9x distributed on load floor 2 pairs of lashing eyes front on gooseneck, each 5t 3 pairs of swivel lashing eyes on gooseneck, each 5t 2 pairs of folding lashing eyes additionally embedded in load floor, each 10t 1x at beginning of load floor 1x at end of rear taper 1 pair of preparation on the slope from gooseneck for 6.7t screw-on lashing eye (JDT) 8 pairs of ring lashing eyes recessed in outer frame, each 5t (convertible to stanchion pockets) 1 pair screw-on lashing eyes, each 6.7t (JDT), with large flange plate incl. thread as counternut Axles & suspension SAF or BPW drum brake axles, manufacturer's choice “Axle/chassis laser alignment” to reduce tire wear and fuel consumption Last axle is self-steering, with automatic reversing lock via reversing light and additional manual lock function via push button on vehicle Air suspension Wheels and tires 235 / 75 R 17.5" Manufacturer's choice Steel rims, twin configuration, factory silver Braking system 2-line compressed air brake system Coloured line routing for easy service Spring-loaded parking brake 24 Volt EBS, electronic braking system with EBS socket at front, without connecting cable Note: The trailer may only be towed by tractor units that ensure effective ABS functionality! 2 coded coupling heads at front, without connecting line With lift & lower valve Axle load detection via EBS-CAN-bus signal, for display in cab, truck must be appropriately equipped, no truck installation (not a calibrated scale) Vehicle stability control system Tire pressure monitoring system according to ECE R 141, display in tractor cab via EBS, truck installation required Electrics 24 Volt, multi-chamber lights, side yellow LED lighting Side yellow LED lighting linked to indicator "flashing side markers" 2 white position lights at front 2 white/red lane marker lights at rear 2x 7-pin coded sockets at front, without connecting cable 1 LED revolving beacon

Stanje: novo, največja dovoljena obremenitev: 17.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.670 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 860 mm, skupna širina: 2.520 mm, Total weight: 24,000 kg / 30,000 kg Unladen weight: 6,100 kg Payload: 17,900 / 23,900 kg Overall length: 10,890 mm Load length: total 8,670 mm; gooseneck section 2,170 mm; loading deck 6,500 mm Width: 2,520 mm Loading height: 860 mm Further information: Plus pre-carriage / provision ex stock location 26639 Wiesmoor: 1,280.00 €/net Chassis Low-bed trailer Steel welded construction Njdpfowlmr Rex Aibsla Turntable with heavy-duty slewing ring Foldable rear supports 2 wheel chocks with holder Aluminum side underrun protection Full-width rear spray flaps (not in conjunction with forklift holder) Quarter-shell mudguards in front of 1st axle Anti-spray flaps behind the 2nd and 3rd axle 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Extendable deck widenings to 3,000 mm (not in rear incline area) (Track width of machines or vehicles to be transported must not exceed outer frame width of 2,550 mm) Storage compartment for timber planks in the center of the loading deck 70 mm timber planks for widening to 3,000 mm Tie-down points low-bed 1 pair of lashing recesses in the longitudinal beam at the front, integrated into gooseneck, each 10 t 4 pairs of lashing holes in outer frame of gooseneck, each 5 t (for attaching tension straps) 7 pairs of lashing mushrooms, integrated top and side in outer frame, each 10 t - 1 x front in gooseneck section - 6 x on lower deck First lashing eye 250 mm from front, last max. 250 mm from rear; maximum distance between lashing eyes 1,100 mm 5 pairs of ring lashing eyes, integrated into the outer frame, each 5 t (convertible to stake pockets) 2 pairs of additional folding lashing eyes, each 10 t - 1 x on gooseneck (overhanging) - 1 x in floor behind last axle Towing unit trailer turntable Drawbar with certified 40 mm towing eye Drawbar height adjustment by spring Axles + suspension BPW drum brake axles "Axle/chassis laser alignment" - reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker balancing) Wheels and tires 235 / 75 R 17.5" manufacturer’s choice Steel rims in twin arrangement, factory silver Braking system 2-line compressed air brake system Spring-actuated parking brake 2 error-proof coupling heads at the front with connecting lines to towing vehicle 24V ABS and ALB, with ABS socket at the front and connecting cable Attention: This trailer may only be towed by vehicles that ensure the effectiveness of the ABS! Electrics 24 volts, multi-chamber lights, yellow LED side marker lights 2 white position lights at the front 2 white/red lane indicator lights at the rear 2 x 7-pin error-proof plugs at the front, with connecting cable 1 LED rotating beacon with holder, switched via parking light (removable lamp) 2 pairs of warning boards, double-sided LED illuminated and extendable to 3,000 mm Floor Gooseneck front with steel/chequer plate covering Storage box recessed into drive-over slope of gooseneck Followed by approx. 70 mm softwood floor, steel/chequer plate covering at wheel arch area Rear slope with 70 mm softwood floor Low-bed area incl. rear slope: 6,500 mm Access ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Additional ramp safety lock, foldable at bottom (prevents lateral slippage, not in conjunction with side hydraulic ramp adjustment) Wood surfaced (tip area with steel/chequer plate) With spring-assisted lifting Operating instructions With 10,000 kg axle load, a special permit is required, only

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, lastna masa: 6.240 kg, skupna masa: 34.000 kg, skupna dolžina: 13.840 mm, skupna širina: 2.550 mm, Leto izdelave: 2017, Dobro stanje, vključno z dodatki kot so trakovi, ščitniki za robove itd. Oprema: dvižna streha, zaboj za palete, inox podvozna škatla, 3 osi, pnevmatike: 385/55 R22,5 Nljdpfex I Rftex Aibea Veljaven tehnični pregled do 03/2026

Stanje: rabljeno, največja dovoljena obremenitev: 32.520 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2007, dolžina tovornega prostora: 7.500 mm, skupna širina: 2.550 mm, Skupna masa: 39.000kg/35.000kg Lastna masa: 6.480kg Nosilnost: 32.520kg/28.520kg Skupna dolžina: 9.220mm Nledpfxeyhk S Eo Aibsa Nakladalna dolžina: ca. 7.500mm Širina: 2.550mm Dodatne informacije - Prostornina: ca. 26-27m³ - BPW osi - Okrogla korita v 'kadeasti' obliki - Delovni podstavek z dostopom - Nastavljive oporne noge po višini - LED vzvratne luči

Stanje: rabljeno, največja dovoljena obremenitev: 31.740 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2009, dolžina tovornega prostora: 7.500 mm, skupna širina: 2.550 mm, Skupna teža: 39.000kg/35.000kg Lastna teža: 7.260kg Nosilnost: 31.740kg/27.740kg Nedpfoyhk Sxex Aibola Skupna dolžina: 9.220mm Nakladalna dolžina: ca. 7.500mm Širina: 2.550mm Dodatne informacije - Prostornina: ca. 26-27m³ - BPW osi - Okrogli keson v "obliki kadi" - Stoječa platforma z dostopom - Nastavljive podporne noge po višini - LED vzvratne luči

Stanje: novo, največja dovoljena obremenitev: 34.720 kg, skupna masa: 39.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.195 mm, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, 3-Achs Sattelauflieger LOGO 10X * Stahl-Glattblech-Abdeckung über Königszapfen geschweißt * Stahl-Tränenblech-Abdeckung hinten verschweißt * Elektronische Luftfederung * 3 Einzelachsen, Fabrikat SAF, 9 t mit Scheibenbremsen Nledpferymwzsx Aibja * 1. Achse liftbar * Handmechanische Abstützung * Schemel: 6x ExTe D10 (Pos. 4 mit Doppeltaschen, Pos. 5 mit flachen Rungentaschen sowie mit Schnellverschluss-Keilsystem) * Rungen: 8x ExTe D7 teleskopierbar + 4x ExTe D10 teleskopierbar * Bereifung: 385/55 R 22,5 auf Stahlfelgen * EBS Bremsanlage * LED Schlußleuchten mit integriertem Dreieckrückstrahler * 4x LED Arbeitsscheinwerfer (1.800 Lumen) * Luftkessel aus Aluminium * 3x Greiferabweiser zwischen den Schemeln * Rahmen + Schemel in RAL 9011 Graphitschwarz * Alle anbauteile nach EG-Vorschrift Abbildungen können vom Original abweichen. Angaben ohne Gewähr. Kontakt: Niclas Lott Tel.:

Stanje: rabljeno, največja dovoljena obremenitev: 33.030 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2011, dolžina tovornega prostora: 7.500 mm, skupna širina: 2.550 mm, Skupna teža: 39.000 kg Lastna teža: 5.970 kg Nosilnost: 33.030 kg Skupna dolžina: 9.220 mm Nledpfx Aioyt Uy Robsa Nakladalna dolžina: ca. 7.500 mm Širina: 2.550 mm Dodatne informacije - Prostornina: ca. 26–27 m³ - Okrogla korita v obliki kadi - Stojna platforma - Po višini nastavljive podporne noge - LED vzvratne žaromete

Stanje: novo, največja dovoljena obremenitev: 33.570 kg, skupna masa: 39.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 12.450 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 2026, Oprema: ABS, DOLL 3-Achs Sattelauflieger LOGO 12 * Stirnwand aus Feinkornstahlblech, ausgelegt nach DIN EN 12642 Code L * Verschweißte Stahl-Tränenblech-Abdeckung * 3 Einzelachsen, Fabrikat SAF, 9 t Scheibenbremsen Intradisc CD * 1. Achse als Liftachse * Luftfederung mit Heben & Senken über Drehschieberventil Nlsdpfx Aiox Egtljbea * Handmechanische Abstützung * 8 x DOLL Mammut Schemel und Rungen * Bereifung 385/65 R 22.5 auf Stahlfelgen * LED Schlußleuchten mit integriertem Dreieckrückstrahler * 4x LED Arbeitsscheinwerfer (1.800 Lumen) * RAL 9011 Graphitschwarz (Rahmen + Schemel), RAL 3002 Karminrot (Rungen) * COC-Dokument Verschiedene schraubbare Zusatzausstattungen wie z. B. Werkzeugkasten, Zusatzabstützung, Aufstieg sind gegen einen Mehrpreis erhältlich. Weitere Informationen auf Anfrage. Abbildungen können vom Original abweichen. Angaben ohne Gewähr. Kontakt: Niclas Lott Tel.: ENGLISH: DOLL 3-axle semi-trailer LOGO 12 * Front wall constructed from fine-grain steel sheet, designed according to DIN EN 12642 Code L * Welded steel checker plate cover * 3 single axles, SAF brand, 9 t Intradisc CD disc brakes * 1st axle liftable * Air suspension with raise/lower function via rotary lever valve * Manual mechanical landing legs * 8 x DOLL Mammut bunks and stanchions * 385/65 R 22.5 tyres on steel rims * LED tail lights with integrated triangular reflector * 4x LED work lights (1,800 lumens) * RAL 9011 graphite black (chassis + bunks), RAL 3002 carmine red (stanchions) * COC (Certificate of Conformity) document Various bolted optional features such as toolbox, additional supports, and access ladder available at extra cost. Further information on request. Images may differ from actual product. Information subject to change. Contact: Niclas Lott Tel.: FRENCH: Semi-remorque DOLL à 3 essieux LOGO 12 * Paroi avant en tôle d’acier à grains fins, conçue selon la norme DIN EN 12642 Code L * Couvercle de plancher en tôle larmée soudée * 3 essieux simples SAF, freins à disque Intradisc CD 9 t * 1er essieu relevable * Suspension pneumatique à commande montée/descente par vanne rotative * Béquilles mécaniques manuelles * 8 x chevalets et montants DOLL Mammut * Pneus 385/65 R 22,5 sur jantes acier * Feux arrière LED avec réflecteur triangulaire intégré * 4 x projecteurs de travail LED (1 800 lumens) * RAL 9011 noir graphite (châssis + chevalets), RAL 3002 rouge carmin (montants) * Document COC Différents équipements vissés optionnels tels que boîte à outils, supports supplémentaires et échelle disponibles en supplément. Pour plus d’informations, merci de nous contacter. Les visuels peuvent différer du produit réel. Informations sans garantie. Contact : Niclas Lott Tel.: POLISH: Naczepa 3-osiowa DOLL LOGO 12 * Ściana przednia z drobnoziarnistej blachy stalowej, zgodna z DIN EN 12642 Kod L * Spawana stalowa pokrywa z blachy ryflowanej * 3 osie pojedyncze, marka SAF, hamulce tarczowe Intradisc CD 9 t * Pierwsza oś podnoszona * Zawieszenie pneumatyczne z podnoszeniem i opuszczaniem za pomocą zaworu obrotowego * Mechaniczne, ręcznie rozkręcane podpory * 8 x kłonice i słupki DOLL Mammut * Opony 385/65 R 22,5 na stalowych felgach * Tylne światła LED ze zintegrowanymi trójkątnymi odblaskami * 4x lampy robocze LED (1800 lumenów) * Kolor: RAL 9011 grafitowa czerń (rama + kłonice), RAL 3002 karminowa czerwień (słupki) * Dokument COC Różne przykręcane opcje dodatkowe, jak skrzynka narzędziowa, dodatkowe podpory, drabinka, dostępne za dopłatą. Dalsze informacje na zapytanie. Zdj

Stanje: novo, največja dovoljena obremenitev: 35.585 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 12.950 mm, višina nakladalnega prostora: 1.347 mm, skupna širina: 2.550 mm, Leto izdelave: 2025, Oprema: ABS, 3-axle semi-trailer LOGO 14XL Specifically designed for OFF- and ON-ROAD applications! Nedpfx Asgqc Eaeibola * Electronic air suspension * 3 single axles, manufacturer SAF, 9 t, with disc brakes * 1st axle liftable, 3rd axle trailing and steered * Radio remote control for operating the frame locking system and the brake * Manually operated landing gear * Bolster: 8x ExTe D7 (position 1 with double pockets, position 2 adjustable and with flat stake pockets as well as quick-release wedge system) * Stakes: 14x ExTe D7 telescopic stakes, 2x ExTe D10 telescopic stakes * Tyres: 385/65 R 22.5 on steel rims * EBS braking system * LED rear lights with integrated triangular reflectors * 4x LED work lights (1,800 lumens) * Air tanks made of aluminium * 1x grab rope * 1x shunting coupling * Frame and bolster in RAL 9011 graphite black * All attachment parts according to EU regulations Various additional equipment available. Further information upon request. Images may differ from original. Subject to alteration. Contact: Niclas Lott Tel.: