Fliegl Prikolica Za Stroje Fliegl Dts 300 S Hidravličnim Nakladanjem R nakup rabljenega (68.699)

Stanje: rabljeno, številka stroja/vozila: WFDFLT3300101xxxx, Leto izdelave: 2024, Prosimo, navedite referenčno številko ob povpraševanju: 18010 Tehnični podatki: 3 osi Dvižna funkcija na 2 oseh Krmiljena os (1 os) Neuporabljen Hidravlične nakladalne rampe Ročna razširitev Zračno vzmetenje Takoj dobavljiv Opis: Fliegl nižji priklopnik za stroje, letnik 2024, neuporabljen. Prikolica je opremljena s hidravličnimi nakladalnimi rampami in je takoj dobavljiva. Ima krmiljeno os in dvižno funkcijo na dveh oseh. Nljdpfx Abjzhfquj Hoc Tehnični pregled: Da EU odobritev do: 15.05.2027 Lastna masa: 5900 kg Skupna masa: 30000 kg Nosilnost: 24100 kg Širina: 255 cm Dolžina: 1110 cm Model: DTS 300 maskinslep s hidravličnimi nakladalnimi rampami = Dodatne informacije = Za več informacij se obrnite na ATS Norway.

Stanje: novo, lastna masa: 6.600 kg, največja dovoljena obremenitev: 17.400 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 6.500 mm, skupna dolžina: 10.900 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17,5 (Doppelbereifung), barva: srebrn, vrsta prenosa: mehanski, poraba goriva (mestna vožnja): 1.090 l/100 km, Unladen weight: 6,600 kg, permissible gross weight: 24,000 kg, cargo area length: 6,500 mm. Tyre size: 235/75 R17.5. 1st axle: , 2nd axle: , 3rd axle: . Leaf suspension. 3-axle low-bed trailer with drop-bed DTS-S 300 - Turntable with robust ball bearing ring - Rear supports, foldable - 1 spare wheel carrier for 1 spare wheel, incl. wheel mounting kit - 1 spare wheel, same brand and type as main tyres, steel rim - 1 plastic toolbox - Extendable load width up to 3,000 mm (not in rear slope) - Storage compartment for timber planks in the centre of the low-bed platform - Timber planks, 70 mm, for widening to 3,000 mm Tie-down points on low-bed: - with spring-loaded lifting aid Axles + suspension: - SAF Nljdpotcwkrsfx Ab Hjc - Drum brake axles - Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalisation (rocker compensation) Braking system: - Dual-line compressed air brake system - Spring-loaded parking brake Electrics: - 24 Volt, multi-chamber lights, yellow LED side lights - 1 LED beacon with mounting bracket, controlled via parking light (removable beacon) - 2 pairs of warning boards, double LED illuminated, extendable to 3,000 mm Floor: - Storage box recessed into drive-up angle at the drop bed - Then 70 mm softwood floor, steel/chequer plate covering in wheel arch area - Rear slope with 70 mm softwood floor Ramps: Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable, covered with wood - 1 pair of ring lashing eyes recessed front in drop bed, 10 t - 4 pairs of lashing holes in rear area, 5 t each for tensioning strap hooks - 7 pairs of lashing points recessed top and side in outer frame, 10 t each (1 x front in drop bed, 6 x in low bed) - 5 pairs of stanchion pockets recessed in outer frame, inside 70 x 40 mm (convertible to 5 t ring lashing eyes for extra cost) - 2 additional pairs of folding lashing eyes, 10 t each, 1 x front in drop bed, 1 x behind 3rd axle Axles + suspension: - SAF - Drum brake axles - Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalisation

Stanje: rabljeno, lastna masa: 5.740 kg, največja dovoljena obremenitev: 24.260 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2020, barva: srebrn, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Lokacija vozila: Bovenden, rotacijska luč, 3 osi, SAF osi, vrtljiva prikolica, listno vzmetenje, ABS (protiblokirni sistem), razširljivo na 3 m, pritrdilne zanke, dvižne rampe 2-delne, mehanske rampe, izvlečna vlečna palica, stranska aluminijasta zaščita, dvojne pnevmatike, EBS Nlsdpfx Aboxbttqs Hoc Nadgradnja: tovorna dolžina cca 8,5 m, razširljivo na 3,05 m Demonstracijsko vozilo! Parabolično vzmeteno z izravnavo osi zadaj, 3x 10t SAF osi, dovoljena skupna masa možna 30t, po dolžini nastavljiva vlečna palica. Novo vozilo iz zaloge s priložnostno registracijo na proizvajalca 21.07.2020! Podatki o dodatni opremi brez jamstva, spremembe, vmesna prodaja in napake pridržane!

Stanje: novo, lastna masa: 6.650 kg, največja dovoljena obremenitev: 17.350 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 10.900 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17,5 (Doppelbereifung), barva: srebrn, vrsta prenosa: mehanski, poraba goriva (mestna vožnja): 1.090 l/100 km, Unladen weight: 6,650 kg, permissible gross weight: 24,000 kg, tyre size: 235/75 R17.5, 1st axle: , 2nd axle: , 3rd axle: , leaf suspension, - welded steel construction - bogie with heavy-duty ball bearing turntable - foldable rear support - 1 spare wheel holder for 1 spare wheel, with wheel mounting kit - without spare wheel, - 1 plastic toolbox, with shelf, dimensions 620x360x440 mm (w/h/d), lockable with padlock - extendable outriggers up to 3,000 mm (not at rear bevel) - storage compartment for timber planks underneath the low-bed area - 70 mm timber planks for extension to 3,000 mm - 1 pair of recessed lashing rings at the front in the gooseneck, each rated at 5 t - 7 pairs of lashing mushrooms recessed top and side in the outer frame, each rated at 10 t (1 x front in gooseneck, 6 x in low-bed area) - 5 pairs of stake pockets recessed in the outer frame, internal 70x40 mm - 2 additional pairs of folding lashing rings, each 10 t, 1x front in gooseneck, 1x behind 3rd axle - towing bar with 40 mm towing eye and 8° inclined towing eye - SAF drum brake axles - parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalisation (rocker equalisation) - 235/75 R17.5 - twin steel rims, factory silver - dual-circuit compressed air brake system - spring-loaded parking brake ABS and ALB, with socket at front, including connecting cable - 24 volt, multi-chamber lights, side yellow LED lighting - 2 x 7-pin non-interchangeable connectors at front, with connecting cable - 1 LED beacon with holder, operated via parking light (removable lamp) - 2 pairs of double LED warning panels, extendable up to 3,000 mm - gooseneck with steel/chequer plate covering - storage box recessed in the transition slope to gooseneck - followed by 70 mm softwood floor, steel/chequer plate covering in wheel well area - rear slope with 70 mm softwood floor - low-bed area incl. rear slope 6,500 mm - steel ramps 2,800 mm long, 750 mm wide, laterally adjustable, with timber covering - additional ramp safety device Nodpfx Ajyxh Rzjb Holc

Stanje: novo, lastna masa: 6.600 kg, največja dovoljena obremenitev: 17.400 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 10.900 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17,5 (Doppelbereifung), barva: srebrn, vrsta prenosa: mehanski, poraba goriva (mestna vožnja): 1.090 l/100 km, Unladen weight: 6,600 kg, permissible gross weight: 24,000 kg, tyre size: 235/75 R17.5, 1st axle: , 2nd axle: , 3rd axle: , leaf suspension, weights: Immediate approval technically possible Gross weight: 24,000 kg, 30,000 kg, payload approx.: 17,400 kg, 23,400 kg; unladen weight approx.: 6,600 kg +/- manufacturing tolerance. Dimensions (approx.): Total length 10,900 mm, total width 2,550 mm, gooseneck length 2,180 mm, low bed platform length incl. rear chamfer 6,500 mm, rear chamfer length 950 mm, frame width 2,520 mm, loaded loading height in low bed 860 mm, coupling height 900 mm, drawbar length 1,900 mm. Equipment: Nsdpfox Nrp Nsx Ab Helc - Extendable width up to 3,000 mm (not in rear chamfer), incl. timber planks - SAF drum brake axles - Parabolic suspension - Drawbar with certified 40 mm towing eye - Tyres 235/75 R17.5 - Storage box recessed at the transition to the gooseneck - 1 plastic toolbox with shelf, 620 mm wide / 360 mm high / 440 mm deep - Steel ramps: 2,800 mm long, 750 mm wide, laterally adjustable, timber-coated - Ramps with spring assist - Frame hot-dip galvanised Subject to errors and changes.

Stanje: novo, številka stroja/vozila: d461243f559015adca5bb372c, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-bed Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holders Aluminium side underrun protection Full-width rear mudflap Half-shell mudguards on 1st axle with anti-spray mudflaps Anti-spray mudflaps behind 2nd and 3rd axle 1 plastic toolbox with shelf, dimensions: W=620/H=360/D=440 mm, lockable with a padlock Extendable width up to 3,000 mm Central storage compartment for timber planks on loading area Nlodpfx Aoi Ri Dlsb Hoc 70 mm timber planks for widening to 3,000 mm Lashing rings for low-bed (40 lashing points) 1 pair of lashing apertures recessed in the front longitudinal beam at the gooseneck, each rated for 10 t 4 pairs of lashing holes in the external frame, each rated for 5 t (for lashing strap hooks) 7 pairs of lashing mushrooms embedded on top and side of the outer frame, each rated for 10 t 1 at the front on the gooseneck 6 in the low-bed section First lashing ring 250 mm from the front, last max. 250 mm from the rear, spacing between lashing rings not greater than 1,100 mm 5 pairs of stake pockets embedded in the external frame, internal dimensions 70 x 40 mm (convertible to 5 t ring lashing eyes) 2 pairs of additional folding lashing eyes, each rated for 10 t 1 on the gooseneck (protruding) 1 recessed behind the last axle Drawbar coupling for turntable trailer Drawbar with certified 40 mm towing eye Axles + Suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker equalizer) Wheels and tyres 235/75 R 17.5 Manufacturer's choice Steel rims in twin configuration, factory silver Braking system 2-line pneumatic braking system Spring-actuated parking brake 2 fail-safe coupling heads at the front, with connecting lines to towing vehicle ABS and ALB, ABS connector at the front with connecting cable Brand: Wabco, Knorr or Haldex Electrics 24 Volt, multi-chamber rear lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marking lights at the rear 2 x 7-pin fail-safe plugs at the front, with connecting cable 1 LED beacon with bracket, controlled via parking lights (removable beacon) 2 pairs of warning boards, double, LED illuminated, extendable to 3,000 mm Floor Gooseneck front with steel tread plate covering Storage box recessed in the transition to the gooseneck Followed by 70 mm softwood flooring, wheel arch areas with steel tread plate covering Rear chamfer with 70 mm softwood flooring Low-bed area incl. rear chamfer: 6,500 mm Loading ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable Timber-layered Hydraulically operated via tractor PTO with throttle, operated from left-hand side, front Hydraulic connection with SVK coupling NW 10/3, including connecting hose Country of registration / Plates Country of registration: Germany 24/7 service hotline Prepared for two-line number plate holder Contour marking with reflective strips according to ECE R 048, white on the side and red at the rear Warning board according to ECE - 70 Paintwork Frame hot-dip galvanized incl. passivation 15-year warranty against rust-through Drawbar galvanized or black, at manufacturer's discretion Loading ramps hot-dip galvanized Note: These are archive images!

Stanje: novo, številka stroja/vozila: 628cde0fe99cc2d3c8eaa8dd8, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-Loader Trailer Steel welded construction Turntable with robust ball bearing slewing ring Foldable rear support 2 wheel chocks with holder Side underrun protection made of aluminium Full-width rear spray flap Half-shell mudguards on 1st axle with anti-spray flaps, anti-spray flaps behind 2nd and 3rd axle 1 plastic toolbox with shelf, dimensions: width=620 mm / height=360 mm / depth=440 mm, lockable with padlock (padlock not included) Extendable width up to 3,000 mm Storage compartment for wooden planks in the centre of the loading area 70 mm wooden planks for extension to 3,000 mm Tie-down lugs for low loader (40 lashing points) 1 pair of lashing cut-outs in the longitudinal beam at the front, recessed into the gooseneck, each rated at 10 t 4 pairs of lashing holes in the outer frame, each rated at 5 t (for securing with lashing straps) 7 pairs of lashing mushrooms, recessed at the top and side of the outer frame, each rated at 10 t 1 at the front on the gooseneck 6 in the low bed First lashing point 250 mm from the front, last max. 250 mm from the rear, spacing between lashing points not greater than 1,100 mm 5 pairs of stake pockets recessed in the outer frame, interior dimensions 70 x 40 mm (convertible to 5 t ring lashing points, not included) 2 additional pairs of folding lashing rings, each rated at 10 t 1 on the gooseneck (protruding) 1 behind the last axle, recessed in the floor Towing Device Turntable Trailer Nledpji Ri Ddefx Ab Hjc Drawbar with certified 40 mm towing eye Axles and Suspension Drum brake axles, manufacturer’s choice Axle/chassis laser alignment to reduce tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalisation (rocker equalisation) Wheels and Tyres 235 / 75 R 17.5 Manufacturer’s choice Steel rims, twin arrangement, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front with connecting lines to the tractor unit ABS and ALB, with ABS socket at the front and connecting cable Manufacturer: Wabco or Knorr Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane lights at the rear 2 x 7-pin non-interchangeable plugs at the front with connecting cable 1 LED beacon with bracket, switched with parking lights (removable beacon) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Gooseneck at the front with steel/chequer plate covering Toolbox recessed into transition slope to gooseneck Following area with 70 mm softwood floor, steel/chequer plate in wheel arch area Rear taper with 70 mm softwood floor Low-loader deck including rear taper: 6,500 mm Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Timber surfaced With spring lift assistance Country of Registration / License Plates Country of registration: Germany 24/7-Service Hotline Prepared for two-line license plate holder Contour marking with reflective strips according to ECE R 048, white on sides, red at rear Warning sign according to ECE-70 Painting Frame hot-dip galvanized including passivation 15 years’ warranty against corrosion perforation Drawbar galvanized or black, manufacturer’s choice Loading ramps hot-dip galvanized Attention! Archive images shown!

Stanje: rabljeno, lastna masa: 6.520 kg, največja dovoljena obremenitev: 23.480 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2019, dolžina tovornega prostora: 8.610 mm, vzmetenje: zrak, velikost pnevmatike: 235/75R17,5 ---/140J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75R17,5 ---/140J, velikost zadnje pnevmatike: 235/75R17,5 ---/140J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Low-bed loading area length approx. 6.50 m, total loading area length approx. 8.60 m, loading height approx. 900 mm. This vehicle is being offered on behalf of a bank. Nledezhf Rnepfx Ab Hec -- Subject to typographical errors, mistakes, and changes. Sample images -- More data at: ! More details: !

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 15.600 kg, največja dovoljena obremenitev: 8.400 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 860 mm, skupna dolžina: 10.900 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 r 17,5, stanje pnevmatik: 100 odstotek, Dodatne informacije Podvozje Jeklena varjena konstrukcija 1. par kolesnih ugreznin je v območju voznega hodnika vgrajen v jekleno platformo, z naklonom za vstop, dolžina spodaj približno 1400 mm, globina približno 400 mm. Okvir je v območju glavnega nosilca 400 mm višji od ugreznine za kolesa. Če naj se prevažajo stroji, pri katerih je treba preveriti skupno višino, prosimo za tehnični podatkovni list tipov strojev z natančnimi podatki (če je skupna višina presežena -> tveganje stranke, potrebno dovoljenje), (odvisno od oddaljenosti tal pod stroji so na strani stranke potrebni vložki v kolesne ugreznine). Vlečna plošča s trdnim ležajem s kroglami, zaboj vgrajen v prednji del vlečne plošče Zadnje opore zložljive 2 podložni zagozdi z nosilci Bočna zaščita iz aluminija Zadnja zaščita proti škropljenju po celotni širini Razširitve izvlečne na 3000 mm (ne v zadnjem poševnem delu) (Širina osi gradbenih strojev oz. vozil, ki se prevažajo, ne sme presegati zunanje širine okvirja 2.550 mm) Shranjevalni prostor za lesene deske na sredini nakladalne površine Lesene deske 70 mm za razširitev na 3000 mm Vezalne točke nizkoploščadnega priklopnika 110 3 para vezalnih točk po 10 t spredaj integriranih v podlago vklj. 6 parov vezalnih gobic vgrajenih zgoraj in ob strani v zunanjem okvirju po 10 t 1 x v območju vratu ostali razporejeni vmes, razdalja ne večja od 1200 mm 1 x zadnji poševni del 5 parov žepov za kole v zunanjem okvirju, notranje mere 70 x 40 mm, (možnost predelave v 5 t. obročne vezalne točke, niso del dobave) Vlečni sklop prikolice z vlečno ploščo Vlečna roka s preizkušenim vlečnim obročem 40 mm Preme in vzmetenje SAF bobnaste zavore Premi/podvozje lasersko izmerjeno, zmanjša obrabo pnevmatik in porabo goriva Parabolično vzmetenje z vzdrževanjem prostim jekleno-gumijastim ležajem Zavorni sistem Dvocevni zračno-tlačni zavorni sistem Barvno označene cevi za lažje servisiranje. Vzmetna parkirna zavora 2 priključni glavi spredaj, s povezovalnimi cevmi do vlečnega vozila, ABS in ALB, s priključkom ABS spredaj, s povezovalnim kablom, Pozor: Prikolico lahko vlečejo le vozila, ki zagotavljajo delovanje ABS! Kolesa & pnevmatike 235/75R17,5 po izbiri proizvajalca Nlsdpji Ri Ryjfx Ab Hoc Jeklena platišča v dvojni postavitvi, tovarniško srebrna Elektrika 24 voltov, večkomorni žarometi, bočna rumena LED razsvetljava 2 bela pozicijska žarometa spredaj 2 belo/rdeča žarometa za ohranitev smeri zadaj 2 x 7-polni priključni vtič spredaj, s povezovalnim kablom, 1 LED rotacijska luč z nosilcem, stikalo prek pozicijske razsvetljave (luč snemljiva) 2 para opozorilnih tabel, dvojno LED osvetljene in izvlečne do 3000 mm Tla Sprednji del jeklena tla, vklj. nato tla iz mehkega lesa 70 mm, v območju kolesnih ohišij jeklena/rebrasta pločevina Zadnji poševni del s 70 mm mehkolesnim dnom Nizka nakladalna površina z zadnjim poševnim delom 8.200 mm Nakladalne rampe Jeklene rampe 2.800 mm dolge, 750 mm široke, bočno pomične s premazom iz lesa s pomočjo za dvig s vzmetjo Navodila za uporabo Pri obremenitvi osi 10.000 kg je potrebno posebno dovoljenje, dovoljeno le za nedeljivo blago! Navedena skupna masa je tehnično možna, odvisno od tovora skupna masa ob upoštevanju dovoljene osi/teže podpore in teže priklopnika morda ne bo dosežena. Država registracije/tablice Država registracije: Nemčija vklj. s preizkusom in poročilom Dekra (v skladu s §13 EG - FGV) 24/7 servisna telefonska številka pripravljeno za dvovrstno nosilko registrske tablice Označevanje obrisa z reflektirnimi trakovi v skladu z ECE

Stanje: novo, številka stroja/vozila: Produktpalette, lastna masa: 8.400 kg, največja dovoljena obremenitev: 15.600 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 860 mm, skupna dolžina: 10.900 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 r 17,5, stanje pnevmatik: 100 odstotek, Rešitev transporta po meri Konfigurirajte svoje Fliegl vozilo glede na svoje zahteve. Prikazano vozilo je primer. Proizvodnja in oprema se prilagodita posameznim željam stranke. Dodatne informacije Podvozje Jeklena varjena konstrukcija Vrtljiva pesta z robustnim kroglastim ležajem Zložljiva zadnja podpora 2 zagozdi za kolesa + nosilec Stranska zaščita iz aluminija Zadnje blatne zavese po celotni širini Četrtinski blatniki pred 1. osjo 1. par vdolbin za kolesa po nižji površini v poglobljenem delu, nagib za vstop, dolžina dna ca. 1600 mm, ca. 400 mm globoko. Opomba! Okvir na osrednjem nosilcu je 400 mm višji kot vdolbina za kolo. 2. par vdolbin za kolesa med osmi v poglobljenem delu, nagib za vstop, dolžina dna ca. 600 mm, ca. 300 mm globoko. Opomba! Okvir na osrednjem nosilcu je 300 mm višji kot vdolbina za kolo. Razširitev izvlečna do 3000 mm (ne vključuje zadnjega nagiba) 70 mm lesene deske za razširitev na 3000 mm Pritrdilne točke za nizkopodnega priklopnika 1 par izrezov za pritrditev v vzdolžnem nosilcu spredaj v poglobljenem delu, vsaka 10 t. 4 para pritrdilnih lukenj v zunanjem okviru, vsaka 5 t. 7 parov pritrdilnih gobic zgoraj in ob strani v zunanjem okviru, vsaka 10 t 1x spredaj v poglobljenem delu 6x v poglobljenem delu prva pritrdilna točka 250 mm od spredaj in zadnja maks. 250 mm od zadaj, razmak pritrdilnih točk ne večji kot 1100 mm Vleka priklopnika na vrtljivem podvozju Vlečna kljuka s certificiranim 40 mm vlečnim obročem Osovine in vzmetenje SAF bobnaste zavore Osovine/podvozje lasersko izmerjeni za zmanjšanje obrabe pnevmatik in porabe goriva Parabolično vzmetenje z brezvzdrževanjem jekleno-gumijastim ležajem Kolesa in pnevmatike 235/75R17,5 po izbiri proizvajalca Jeklena platišča v dvojni izvedbi, barvano v srebrno (tovarniško) Zavorni sistem 2-cestni zračni zavorni sistem Vzmeteni parkirni zavorni cilinder 2 varno zamenljiva spojna priključka spredaj, z veznimi cevmi do vlečnega vozila, ABS ter ALB, z ABS priključkom spredaj ter povezovalnim kablom. Pozor: priklopno vozilo sme vleči samo vlečno vozilo, ki omogoča delovanje sistema ABS! Elektrika 24 voltov, večkomorni žarometi, stranska rumena LED osvetlitev, 2 sprednji beli pozicijski luči 2 beli/rdeči luči za označevanje sledi zadaj 2 x 7-polna varno zamenljiva vtiča spredaj z veznim kablom, 1 LED rotacijska luč z nosilcem, upravljana preko pozicijske luči (luč odstranljiva) 2 para opozorilnih tabel, dvojno LED osvetljenih, izvlečenih do 3000mm Pod Sprednji poglobljen del s premazom iz jekla/rebraste pločevine Shranjevalni zaboj v nagibu proti poglobljenemu delu, nato s 70 mm mehkolesom, na območju kolesnih vdolbin jeklen/rebrast premaz Zadnji nagib s 70 mm mehkolesom Nizkopodno nakladalno površino vklj. z zadnjim nagibom 6500 mm Ramps Jeklene rampe, dolžine 2800 mm, širine 750 mm, stransko premične z leseno oblogo z dvižno pomočjo s vzmetjo Navodila za uporabo Pri osni obremenitvi 10.000 kg je potrebno posebno dovoljenje, možno le za nedeljeno blago! Navedena skupna masa je tehnično možna, glede na vrsto tovora pa skupna masa morda ne bo dosežena v skladu z dovoljenimi osnimi, podpornimi in priklopnimi obremenitvami. (Slabe vozne in sledilne lastnosti zaradi nepravilne razporeditve tovora možno!) Država registracije/tablice Nledpfji Ri Rvox Ab Hoc Država registracije: Nemčija z Dekra pregledom in poročilom (po §13 EG - FGV)

Stanje: rabljeno, največja dovoljena obremenitev: 17.940 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2021, naslednji pregled (TÜV): 06/2027, dolžina tovornega prostora: 8.680 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.520 mm, Skupna teža: 24.000 kg / 30.000 kg Lastna teža: 6.060 kg Nosilnost: 17.940 kg / 23.940 kg Skupna dolžina: 10.900 mm Nakladalna dolžina: Skupaj pribl. 8.680 mm / pribl. 6.500 mm poglobljeni del vključno z zadnjim zaključkom Širina: 2.520 mm / nakladalna širina pribl. 2.500 mm Nakladalna višina: 900 mm Dodatne informacije - Zračno vzmetenje - Jeklene rampe dolžine 2.800 mm, širine 750 mm, bočno nastavljive, z vzmetno podporo - velik paket za pritrjevanje tovora - dvojne pnevmatike Nedpfozgz Dbjx Ab Hjlc - okvir vroče pocinkan, vključno s pasivacijo

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33001012559, lastna masa: 6.250 kg, največja dovoljena obremenitev: 17.750 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.620 mm, širina tovornega prostora: 2.520 mm, skupna dolžina: 10.890 mm, skupna širina: 2.550 mm, skupna višina: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17,5", stanje pnevmatik: 100 odstotek, barva: črn, Chassis Low-bed Trailer: Steel welded construction, turntable with robust ball-bearing slewing ring, foldable rear support, 2 wheel chocks with holder, aluminum side underrun protection, splash guards at the rear across the full width (not compatible with forklift mounting), half-shell mudguards, 1st axle with anti-spray splash guards, anti-spray splash guards behind 2nd and 3rd axles, 1 plastic toolbox with shelving, W=620/H=360/D=440 mm, lockable with padlock, width extensions retractable to 3,000 mm, storage compartment for timber planks in the middle of the load bed, 70 mm timber planks for extension to 3,000 mm, lashing eyes for low-loader, 1 pair of lashing cutouts in the longitudinal beam at the front on the gooseneck recessed (each 10 t.), 4 pairs of lashing holes in the outer frame (each 5 t. load securing strap hooks), 7 pairs of lashing mushrooms, recessed at the top and sides of the outer frame (each 10 t.), 1x front on gooseneck, 6x in well-bed, first lashing eye 250 mm from the front and last a max. of 250 mm from the rear, spacing of the lashing eyes no greater than 1100 mm, 5 pairs of ring lashing eyes recessed in the outer frame (each 5 t., convertible to stake pockets), 2 pairs of additional folding lashing eyes (each 10 t.), 1x on gooseneck (protruding), 1x recessed in the floor behind the last axle, 1 pair of screw-in lashing eyes (each 6.7 t., JDT), with large flange plate incl. thread as counter-holder, at the front on gooseneck. Towing attachment for turntable trailer: drawbar with certified 40 mm towing eye, parking sockets for electrics/ABS and air connections on the drawbar. Axles & Suspension: SAF drum brake axles, 'axle/chassis laser alignment' for reduction of tire wear and fuel consumption, air suspension with raising & lowering valve, controllable separately for front and rear. Wheels and Tires: 235/75 R17.5" Fulda, rims: 6 x steel rims mounted inside in twin arrangement; 6 x polished aluminum rims mounted outside. Brake system: 2-line compressed air brake system, spring-loaded parking brake, trailer info center to display vehicle data such as axle load (not certified scales) and odometer, vehicle driving stability system, axle load detection via EBS CAN bus signal for display on truck cab screen (truck must be suitably pre-equipped), 2 fail-safe coupling heads at front with connecting lines to tractor unit, EBS, electronic braking system with EBS plug at front including connection cable. Electrics: 24 Volt, multi-chamber LED lights, side yellow LED lighting, license plate lighting in LED, make: Aspöck EcoLED 2 with dynamic indicator premium LED side marker lights, 2 front white position lights in LED, 2 rear white/red lane control lights in LED, 2 x 7-pin fail-safe plugs at the front with connection cable, additional LED work light at rear, 1 LED rotating beacon with bracket, switched via parking light, 2 pairs of LED-illuminated warning signs, extendable to 3,000 mm. Nlodpfozaznzsx Ab Hoc Floor: front gooseneck section with steel/chequer plate covering, tool box recessed in the ramped transition to gooseneck, then with 70 mm Siberian larch wood flooring, wheel arch area with steel/chequer plate surface, rear ramp with 70 mm larch wood flooring, low-bed area including rear ramp 6,500 mm, drive-on ramps: steel ramps 2,800 mm long, 750 mm wide, laterally adjustable, additional ramp securing bracket, foldable underneath (for lateral anti-slip - not in combination with hydraulic lateral ramp shift), with wood overlay, spring

Stanje: novo, največja dovoljena obremenitev: 17.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.670 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 860 mm, skupna širina: 2.520 mm, From ongoing production Gross weight: 24,000 kg / 30,000 kg Unladen weight: 6,100 kg Payload: 17,900 kg / 23,900 kg Overall length: 10,890 mm Loading length: 8,670 mm total, 2,520 mm gooseneck, 6,500 mm loading deck Width: 2,520 mm Loading height: 860 mm Additional information Steel welded construction Turntable with heavy-duty slewing ring Nlsdpsuytx Sjfx Ab Hsc Foldable rear supports Wheel chocks with holder Aluminum side underrun protection Full-width rear spray flap (not compatible with forklift holder) Half-shell mudguards on 1st axle with anti-spray flaps Anti-spray flaps behind 2nd and 3rd axles Plastic toolbox Extendable width up to 3,000 mm Storage compartment for timber planks positioned centrally on the loading area 70 mm timber planks for widening to 3,000 mm Tie-down points for low-loader 1 pair of lashing cut-outs in the front longitudinal beam on the gooseneck, each 10 t 4 pairs of lashing holes on the outer frame of the gooseneck, each 5 t (for attaching tension belts) 7 pairs of lashing mushrooms flush-mounted on top and on the sides of the outer frame, each 10 t 1 in front on the gooseneck, 6 in the low-bed Pairs of ring lashings flush-mounted in the outer frame, each 5 t (can be converted to stake pockets) Additional pairs of folding lashing points, each 10 t 1 on the gooseneck 1 recessed in the floor behind the last axle Drawbar equipment for turntable trailer Drawbar with certified 40 mm towing eye Drawbar height adjustment via spring Axles and suspension Drum brake axles, manufacturer’s choice “Axle/chassis laser alignment” for reducing tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker balancer) Wheels and tires 235/75 R 17.5" manufacturer’s choice Steel twin wheels, factory silver Braking system Dual-line compressed air brake system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connector lines to the tractor unit 24 V ABS and ALB, with ABS plug at the front and connecting cable Electrics 24 V, multi-chamber lights, yellow LED side marker lights 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pole fail-safe plugs at the front, with connecting cable LED beacon with holder, switched via parking light (removable beacon) Pair of double warning boards, LED-illuminated and extendable to 3,000 mm Floor Gooseneck at front with steel/chequer plate decking Storage compartment recessed into the transition slope to the gooseneck Then approx. 70 mm softwood floor, in wheel arch area with steel/chequer plate decking Rear bevel with 70 mm softwood floor Low bed area including rear bevel 6,500 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Additional lower ramp safety (prevents lateral slippage of ramps, not compatible with side hydraulic ramp adjustment) Wooden covering (tip area with steel/chequer plate) Hydraulic operation via tractor PTO with restrictor, operation on driver side left Hydraulic connection with SVK plug NW 10/3, incl. connection hose Paintwork Frame hot-dip galvanized including passivation Access ramps hot-dip galvanized plus freight / provision ex works 26639 Wiesmoor: €1,280.00 net

Stanje: novo, največja dovoljena obremenitev: 23.920 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, NOVO VOZILO Fliegl 3-osni nizkopodni priklopnik tipa DTS 300, vroče pocinkan Skupna masa 24.000 kg / 30.000 kg Nosilnost 17.920 kg / 23.920 kg Lastna teža 6.080 kg Skupna dolžina 10.900 mm Nakladalna dolžina 8.680 mm Nakladalna površina 6.500 mm vključno z 900 mm nakladalnim nagibom Parabolično vzmetenje Dolge rampe 2.800 mm s hidravličnim upravljanjem Njdpfxexb Nmyj Ab Hslc Razširitev na 3.000 mm z opozorilnimi tablami in rotacijsko lučjo Velik komplet za pritrjevanje z zateznimi točkami 5,0 in 10,0 ton 5 parov žepov za nosilce Vlečni obroč 40 mm plus prevoz/stroški priprave iz skladišča Wiesmoor 1.280,00 €/neto Ponudba najema z odkupom: doba 48 mesecev, preostala vrednost 40 %, predujem samo DDV. Mesečna najemnina: 500,00 EUR

Stanje: novo, največja dovoljena obremenitev: 23.890 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Vehicle from current production Nedpfx Abok N Adks Hjlc NEW VEHICLE Fliegl 3-axle low loader type DTS 300, hot-dip galvanized Gross weight: 24,000 kg / 30,000 kg Payload: 17,890 kg / 23,890 kg Unladen weight: 6,080 kg Overall length: 10,900 mm Load length: 8,680 mm Loading bed: 6,500 mm incl. 900 mm approach ramp Loading height: 860 mm Air suspension with lift and lower valve Long loading ramps 2,800 mm, hydraulically operated Extendible width to 3,000 mm with warning signs and rotating beacon Heavy-duty lashing package with 5.0 and 10.0 t lashing points 5 pairs of stake pockets Drawbar eye 40 mm plus delivery/transport fee ex-stock Wiesmoor EUR 1,280.00 net Hire purchase offer: Term 48 months, final residual value 40%, down payment VAT only. Monthly instalment: EUR 609.00

Stanje: novo, največja dovoljena obremenitev: 17.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.670 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 860 mm, skupna širina: 2.520 mm, New vehicle: Fliegl 3-axle low-loader trailer with ramps, model DTS 300 Vehicle fully hot-dip galvanized Gross weight: 24,000kg / 30,000kg Unladen weight: 6,100kg Payload: 17,900 / 23,900kg Overall length: 10,890mm Loading length: total 8,670mm; 6,500mm low bed including rear bevel / 2,170mm gooseneck Width: 2,520mm Loading height: 860mm Further information: plus freight/preparation ex stock location 26639 Wiesmoor, EUR 1,280.00 net Leasing offer: Term 48 months, down payment only the VAT. Residual value 40% Monthly installment: EUR 569.00 Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support Wheel chocks with holders Aluminum side underrun protection Full-width rear mudflaps (not in combination with forklift mounting) Semi-shell fenders on 1st axle with anti-spray mudflaps Anti-spray mudflaps behind 2nd and 3rd axles 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Extendable outriggers to 3,000 mm (not at rear bevel). (Track width of construction machinery or vehicles to be transported must not exceed outer frame width of 2,550 mm) Central storage compartment for wooden planks on the loading area 70 mm wooden planks for extension to 3,000 mm Lashing points for low-loader 1 pair of lashing cutouts in the front longitudinal beam on the gooseneck, each 10 t 4 pairs of lashing holes in the outer frame of the gooseneck, each 5 t (for attaching tie-down straps) 7 pairs of inlaid lashing rings on top and side of outer frame, each 10 t (1 at gooseneck front, 6 in low bed) First lashing ring 250 mm from front and last max. 250 mm from rear, lashing point spacing not greater than 1,100 mm 5 pairs of inlaid ring lashing points in outer frame, each 5 t (convertible to stake pockets) 2 additional pairs of foldable lashing rings, each 10 t (1 at gooseneck - protruding, 1 recessed in floor behind last axle) Drawbar assembly for turntable trailer Drawbar with certified 40 mm towing eye Drawbar height adjustment via spring mechanism Axles & Suspension Drum brake axles, brand per manufacturer’s choice Axle/chassis laser alignment to reduce tire wear and fuel consumption Air suspension with raise & lower valve Nljdpfx Abov D T R Eo Hjc Wheels and tires 235/75 R 17.5'', per manufacturer’s choice Steel twin wheels, factory silver finish Braking system Dual-line compressed air brake system Spring-operated parking brake Vehicle stability control system Axle load detection via EBS-Canbus signal for display in cab (truck must be pre-equipped, not installed/no certified scale) 2 non-interchangeable coupling heads at front with connection lines to tractor unit 24V EBS, electronic braking system with EBS connector at front and connecting cable Note: The trailer may only be towed by towing vehicles that ensure proper ABS function! Electrics 24V, multi-chamber lights, side yellow LED lighting 2 white position lights at front 2 white/red lane control lamps at rear 2 x 7-pin non-interchangeable connectors at front, with connection cable 1 LED revolving beacon with holder, switched via parking light, removable 2 pairs of warning panels, double LED-lit and extendable to 3,000mm Floor Gooseneck front with steel/chequer plate cover Storage compartment recessed in gooseneck ramp Subsequent area with approx. 70 mm softwood floor, wheel arch area with steel/chequer plate Rear bevel with 70 mm softwood flooring Low-loader platform including rear bevel: 6,500mm Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, side mounted

Stanje: novo, največja dovoljena obremenitev: 17.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.670 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 860 mm, skupna širina: 2.520 mm, Total weight: 24,000 kg / 30,000 kg Unladen weight: 6,100 kg Payload: 17,900 / 23,900 kg Overall length: 10,890 mm Load length: total 8,670 mm; gooseneck section 2,170 mm; loading deck 6,500 mm Width: 2,520 mm Loading height: 860 mm Further information: Plus pre-carriage / provision ex stock location 26639 Wiesmoor: 1,280.00 €/net Nljdpfewlmr Rjx Ab Hoc Chassis Low-bed trailer Steel welded construction Turntable with heavy-duty slewing ring Foldable rear supports 2 wheel chocks with holder Aluminum side underrun protection Full-width rear spray flaps (not in conjunction with forklift holder) Quarter-shell mudguards in front of 1st axle Anti-spray flaps behind the 2nd and 3rd axle 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Extendable deck widenings to 3,000 mm (not in rear incline area) (Track width of machines or vehicles to be transported must not exceed outer frame width of 2,550 mm) Storage compartment for timber planks in the center of the loading deck 70 mm timber planks for widening to 3,000 mm Tie-down points low-bed 1 pair of lashing recesses in the longitudinal beam at the front, integrated into gooseneck, each 10 t 4 pairs of lashing holes in outer frame of gooseneck, each 5 t (for attaching tension straps) 7 pairs of lashing mushrooms, integrated top and side in outer frame, each 10 t - 1 x front in gooseneck section - 6 x on lower deck First lashing eye 250 mm from front, last max. 250 mm from rear; maximum distance between lashing eyes 1,100 mm 5 pairs of ring lashing eyes, integrated into the outer frame, each 5 t (convertible to stake pockets) 2 pairs of additional folding lashing eyes, each 10 t - 1 x on gooseneck (overhanging) - 1 x in floor behind last axle Towing unit trailer turntable Drawbar with certified 40 mm towing eye Drawbar height adjustment by spring Axles + suspension BPW drum brake axles "Axle/chassis laser alignment" - reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker balancing) Wheels and tires 235 / 75 R 17.5" manufacturer’s choice Steel rims in twin arrangement, factory silver Braking system 2-line compressed air brake system Spring-actuated parking brake 2 error-proof coupling heads at the front with connecting lines to towing vehicle 24V ABS and ALB, with ABS socket at the front and connecting cable Attention: This trailer may only be towed by vehicles that ensure the effectiveness of the ABS! Electrics 24 volts, multi-chamber lights, yellow LED side marker lights 2 white position lights at the front 2 white/red lane indicator lights at the rear 2 x 7-pin error-proof plugs at the front, with connecting cable 1 LED rotating beacon with holder, switched via parking light (removable lamp) 2 pairs of warning boards, double-sided LED illuminated and extendable to 3,000 mm Floor Gooseneck front with steel/chequer plate covering Storage box recessed into drive-over slope of gooseneck Followed by approx. 70 mm softwood floor, steel/chequer plate covering at wheel arch area Rear slope with 70 mm softwood floor Low-bed area incl. rear slope: 6,500 mm Access ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Additional ramp safety lock, foldable at bottom (prevents lateral slippage, not in conjunction with side hydraulic ramp adjustment) Wood surfaced (tip area with steel/chequer plate) With spring-assisted lifting Operating instructions With 10,000 kg axle load, a special permit is required, only

Stanje: rabljeno, konfiguracija osi: 3 osi, skupna širina: 25.500 mm, skupna višina: 35.000 mm, Leto izdelave: 2018, Oprema: ABS, = More options and equipment = - Rear air suspension - Front air suspension = Notes = For inquiries about the vehicle, Mr. Seidel (by phone) will be happy to assist you. Fliegl DTS 300 low-bed trailer BPW axles, drum brakes, spring-loaded brakes, mechanical ramps, permissible total weight: 24,000 kg, unladen weight: 6,350 kg, payload: 17,650 kg, loading dimensions: L 8,490 mm W 2,510 mm, tire tread: 1st axle 7-12 mm, 2nd axle 7-8 mm, 3rd axle 4-7 mm On request, we can provide you with a leasing or financing offer. Mr. Seidel (tel.) will be happy to assist you. Further information can be found on our homepage. ... Errors, changes, and prior sale excepted!!! Nodpfx Absy Svrgo Hslc = Further information = Unladen weight: 6,350 kg Payload: 17,650 kg GVW: 24,000 kg Please contact Tobias Ebert for more information.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 7 kg, največja dovoljena obremenitev: 17 kg, skupna masa: 24 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 5.900 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 860 mm, skupna dolžina: 11.070 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 r 17,5, stanje pnevmatik: 100 odstotek, Šasija Jeklena varjena konstrukcija Vrtljiva plošča z močnim krogličnim obročem Zložljivo zadnje podporno stojalo 2 zagozdi za kolesa z nosilcem Stranska zaščita proti spodrsljaju iz aluminija Zadnje blatnike čez celotno širino Polovični blatnik na 1. osi z antisperjnimi zavesicami, antisperjne zavesice za drugo in tretjo os 1 plastična orodjarna škatla, z vložno polico, š=620/v=360/g=440 mm, zaklepna z obešanko Razširitve izvlečne do 3.000 mm (ne v zadnji poševnini) Sredinsko skladišče za lesene deske na tovorni površini Lesene deske 70 mm za razširitev na 3.000 mm Pritrdilne zanke za nizkopodni priklopnik 1 par vdelanih pritrdilnih zank spredaj na vratih, po 5 ton 7 parov vdelanih pritrdilnih gobic zgoraj in ob strani v zunanji okvir, po 10 ton 1 x spredaj pri vratih 6 x v nizkem dnu prva pritrdilna zanka 250 mm od spredaj, zadnja max. 250 mm od zadaj, razmak ne več kot 1100 mm 5 parov žepov za kol znotraj zunanjega okvirja, notranje mere 70 x 40 mm, lahko se predelajo v 5 t. okrogle pritrdilne zanke (niso vključene v obseg dobave) Nlodpfx Absi Riwfj Hsc 2 dodatna para zložljivih pritrdilnih zank, po 10 ton 1 x spredaj na vratih (izstopa) 1 x za zadnjo osjo, vgrajena v tla Priključna oprema za priklopnik z vrtljivo ploščo Vlečna roka s preizkušenim 40 mm vlečnim obročem Osi in vzmetenje SAF bobnaste zavore Meritev osi/podvozja z laserjem za zmanjšanje obrabe pnevmatik in porabe goriva Parabolično vzmetenje z vzdrževanjem prostim jeklo-gumijastim ležiščem in mehanskim uravnavanjem osne obremenitve (nihanje) Kolesa in pnevmatike 235/75R17,5 po izbiri proizvajalca z oznako M&S Jeklena platišča v dvojni postavitvi, tovarniško srebrna Zavorni sistem Dvovodni zračno zaviralni sistem Vzmetni zavorni zasilni sistem 2 varno izmenljivi priklopni glavi spredaj z povezovalnimi cevmi do vlečnega vozila ABS in ALB, z ABS vtičem spredaj in povezovalnim kablom Znamka: Wabco ali Knorr Pozor: Priklopno vozilo lahko vlečejo samo vozila, ki zagotavljajo delovanje ABS! Elektrika 24V, večkomorni žarometi, bočna rumena LED osvetlitev 2 bela pozicijska svetilnika spredaj 2 bela/rdeča stranska označevalnika zadaj 2 x 7-polni varno izmenljivi vtični konektor spredaj, z povezovalnim kablom 1 LED rotacijska luč z nosilcem, vklop preko pozicijskih luči (luč snemljiva) 2 para opozorilnih tabel, dvojnih, LED osvetljenih, izvlečnih do 3.000 mm Tla Spredaj z jeklenim/reliefnim pločevinastim premazom Shranjevalni zaboj v poševnini vdelan v tla Nato s 70 mm mehkim lesenim podom, na področju blatnikov jeklen/reliefni pločevinasti premaz Zadnja poševnina s 70 mm mehkim lesenim podom Nizka nakladalna površina skupaj z zadnjo poševnino: 6.500 mm Nakladalne rampe Jeklene rampe 2.800 mm dolge, 750 mm široke, bočno pomične Dodatno zložljivo zavarovanje ramp spodaj (za zaščito pred bočnim premikom ramp; ni v kombinaciji s hidravličnim bočnim premikom ramp) Obložene z lesom S pomočjo vzmetnega dvigalnika Navodila za uporabo Pri osni obremenitvi 10.000 kg je potrebna posebna dovolilnica, možno samo za nedeljive tovore! Navedena skupna masa je tehnično možna – glede na tovor skupna masa ob upoštevanju dovoljene osne, podporne in sedalne obremenitve morda ne bo dosežena. Država registracije/tablice Država registracije: Nemčija Preizkušeno in odobreno v skladu z EG 2007/46 24/7 servisna linija

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 7.150 kg, največja dovoljena obremenitev: 16.850 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, širina tovornega prostora: 2.520 mm, skupna dolžina: 11.990 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 r 17,5, stanje pnevmatik: 100 odstotek, Rešitev za prevoz po meri Konfigurirajte svoje Fliegl vozilo glede na vaše zahteve. Prikazano vozilo je zgolj primer. Proizvodnja in oprema sta izvedeni individualno glede na želje stranke. Dodatne informacije Podvozje Jeklena varjena konstrukcija Obračalna plošča z močnim krogelnim ležajem, skladiščna škatla vgrajena v prednjo konstrukcijo obračalne plošče Zadnja opora zložljiva 2 zagozdi z nosilcem Stranska zaščita iz aluminija Zadnji blatniki po celotni širini Razširitve izvlečne do 3.000 mm (ne v zadnjem poševnem delu) Skladiščni prostor za lesene deske na sredini tovorne površine Lesene deske 70 mm za razširitev na 3.000 mm Pritrdilni obroči za nizko prikolico 3 pari pritrdilnih točk, vsaka do 10 t, vgrajene spredaj v dno 6 parov pritrdilnih gobic vgrajenih zgoraj in ob straneh v zunanji okvir, vsaka do 10 t 1x v predelu vratu ostale razporejene vmes, razdalja največ 1.200 mm 1x v zadnjem poševnem delu 5 parov žepov za stebre v zunanjem okviru, notranje mere 70 x 40 mm (prilagodljivo za 5 t prstanaste pritrdilne obroče, ni vključen v obseg dobave) Vlečna naprava prikolice z obračalno ploščo Vlečna gred s certificirano 40 mm vlečno ušico Premi in vzmetenje SAF bobnaste zavore Nsdei Riy Eopfx Ab Hjlc Premi/podvozje izmerjeno z laserjem – zmanjšana obraba pnevmatik in poraba goriva Parabolično vzmetenje z vzdrževanjem prostimi jeklenimi in gumijastimi ležaji ter mehanski izravnalec osi (gugalnica) Zavorni sistem Dvovodna pneumatska zavorna instalacija Barvno označene cevi za enostavno servisiranje Parkirna zavora z vzmetjo vključena 2 varni spojki spredaj, s povezovalnimi cevmi do vlečnega vozila, ABS in ALB, s sprednjim ABS vtičem in spojnim kablom Opozorilo: Priklopno vozilo sme vleči le vlečno vozilo, ki zagotavlja delovanje ABS! Kolesa in pnevmatike 235 / 75 R 17,5 po izbiri proizvajalca Jeklena platišča v dvojni postavitvi, tovarniško srebrna Elektrika 24 voltov, večkomorni žarometi, stranske rumene LED luči 2 bela pozicijska žarometa spredaj 2 bela/rdeča markerja zadaj 2x 7-polni varni vtičnik spredaj, s povezovalnim kablom 1 LED rotacijska luč z nosilcem, upravljana preko parkirne osvetlitve (luč snemljiva) 2 para opozorilnih tabel, LED osvetljene in izvlečne do 3.000 mm Tla Sprednji del - jeklena tla, nato 70 mm mehka lesena tla, v območju koles jekleni/rečnati pločevinasti premaz Zadnji poševni del s 70 mm mehko leseno površino Nizkoprethodna površina skupaj z zadnjim poševnim delom dolžine 8.200 mm Vozne rampe Jeklene rampe dolge 2.800 mm, široke 750 mm, bočno pomične premazane z lesom vključeno podprte s pomočjo vzmeti Navodila za uporabo Pri 10.000 kg osni obremenitvi je potrebna izjemna odobritev, možno le za nerazdeljivo tovor!!! Navedena skupna teža je tehnično možna; odvisno od tovora skupna teža v skladu z dovoljenimi osnimi/torznimi/dvokolesnimi obremenitvami morda ne bo dosegljiva. Država registracije/tablice Država registracije: Nemčija z Dekra pregledom in poročilom (po §13 EG - FGV) 24/7 servisna linija pripravljeno za dvovrstni nosilec tablice Označitev oblike s reflektivnimi trakovi po ECE R 048, stransko belo in zadaj rdeče Barvanje Okvir DB 7350 novosiva 10 let garancije proti rjavenju Vlečna gred pocinkana ali črna, po izbiri proizvajalca Vozne rampe vroče pocinkane Pozor: Arhivske slike! Rešitev za prevoz po meri Konfigurirajte svoje Fliegl vozilo glede na vaše zahteve. Prikazano vozilo je zgolj primer. Proizvodnja in oprema sta izvedeni individualno glede na želje stranke.

Stanje: novo, največja dovoljena obremenitev: 23.340 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, NEW VEHICLE Fliegl 3-Axle Flatbed Low Loader DTL - S - 300 Agrar, chassis and frame hot-dip galvanized Gross weight: 24,000 kg / 30,000 kg Payload: 17,340 kg / 23,340 kg Unladen weight: 6,660 kg Overall length: 11,625 mm Platform length: 9,000 mm incl. 900 mm approach slope Loading height: 900 mm Large lashing package 40 mm drawbar Tyres: 235 / 75 R 17.5'' twin wheels without ABS, approval max. 60 km/h Electrical system 12 Volt, LED rotating beacon Ramps with spring lifts, ramp length 2,800 mm Vehicle from ongoing production – delivery lead time approx. 14 days. Nedpsllwhnofx Ab Helc plus freight/preparation ex stock Wiesmoor €1,280.00 / net Towing vehicle LoF, agricultural or forestry registration Lease-purchase offer: term 48 months, residual value 40%, down payment only the VAT. Monthly rate: €599.00

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 6.950 kg, največja dovoljena obremenitev: 23.050 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.500 mm, širina tovornega prostora: 2.520 mm, skupna dolžina: 9.350 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, Rešitev za prevoz po meri Konfigurirajte svoje Fliegl vozilo glede na vaše zahteve. Prikazano vozilo je primer. Proizvodnja in oprema se izvajata individualno glede na želje stranke. Šasija prikolice s centralno osjo, gradbena izvedba Varjena konstrukcija iz drobnozrnatega jekla Prednji oporni nogi na menjalniku Hidravlična zadnja podpora Nedpfxozcv D Nj Ab Hjlc Zagozde za kolesa z nosilcem Stranska zaščita iz aluminija brez zaščite proti podvozu Zadnji blatniki čez celotno širino Blatniki pred vsako osjo in antispray-blatniki za vsako osjo Plastična orodjarna, z vmesno polico, š=620/v=360/g=440 mm, zaklepna z obešanko Razširitve izvlečne do 3.000 mm Sredinsko skladišče za lesene deske + lesene deske 70 mm za razširitev na 3.000 mm Privezne točke za nizkonosečo prikolico Vgrajeni obročasti d-vlečni nosilci v zunanjem okviru, vsak 5 t (možnost predelave v cevi za količke) Privezne gobice zgoraj in ob strani v zunanjem okviru, vsak 10 t Vleka centralnoose prikolice Vlečna roka s preizkušeno 50 mm vlečno zanko Osovine in vzmetenje Bobnaste zavore "Lasersko merjene osi/podvozje" - za zmanjšano obrabo pnevmatik in nižjo porabo goriva Zadnja os krmiljena, z avtomatsko blokado pri vzvratni vožnji prek vzvratnega svetila, dodatna blokada na vozilu prek ročnega gumba Zračno vzmetenje 1. os samodejno dvižna os, dodatno ročno spustljiva, upravljanje prek gumba na vozilu Dvig osi pod priporočeno vozno višino, zato ni jamstva za poškodbe pnevmatik Zavorni sistem Dvocevni zračni zavorni sistem, barvno označene cevi za lažje servisiranje Parkirno zavora z vzmetjo 2 nezamenljivi priključni glavi spredaj z povezovalnimi cevmi do vlečnega vozila EBS, Elektronski zavorni sistem z EBS priključkom spredaj, vključno s povezovalnim kablom Opozorilo: Priklopno vozilo sme vleči samo vlečno vozilo, ki zagotavlja delovanje ABS! Z dvigalno/spustnim ventilom Višina vozila v kombinaciji z dvižno osjo: ko je os dvignjena, se višina nakladalne oziroma skupne višine poveča za 50 mm Sistem za stabilnost vozila Trailer Infocenter za prikaz podatkov o vozilu, kot so obremenitev osi, prevožena kilometrina in diagnostična/sporočilna sporočila sistema Prepoznavanje obremenitve osi prek EBS-Canbus signala, prikaz na zaslonu v kabini voznika Kolesa in pnevmatike 235/75 R17,5, znamka po izbiri proizvajalca Jeklena platišča, tovarniško srebrna Električni sistem 24 voltov, večkomorni LED žarometi z uporom, stranske rumene LED luči, osvetlitev registrskih tablic v LED 2 bele pozicijske LED luči spredaj 2 bela/rdeča LED luči za ohranjanje pasu zadaj 2 x 7-polni izmenljivo varni vtiči spredaj s povezovalnim kablom Dodatni LED delovni reflektorji na zadku LED rotacijska luč z nosilcem Opozorilne table osvetljene z LED, izvlečne do 3.000 mm Tla potem 70 mm pod iz mehkega lesa, na območju blatnikov jeklena/rebrasta pločevina Zadnja zaokrožitev s 70 mm mehke lesene talne obloge Nizko nakladalna površina z zadnjo zaokrožitvijo 7.500 mm Nakladalne rampe Jeklene rampe dolžine 2.800 mm, širine 750 mm, bočno premične preoblečene z lesom Hidravlično prek stranskega izhoda pogonskega vozila z dušilko, upravljanje stransko na levi spredaj Hidravlično bočno premikanje nakladalnih ramp, možnost individualnega upravljanja Hidravlična povezava s SVK vtičem NW 10/3, vključno s povezovalno cevjo Rešitev za prevoz po meri

Stanje: novo, največja dovoljena obremenitev: 18.400 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 5.900 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 860 mm, skupna širina: 2.520 mm, Total weight: 24,000kg / 30,000kg Curb weight: 5,600kg Payload: 18,400kg / 24,400kg Overall length: 10,290mm Loading length: 5,900mm incl. rear bevel Width: 2,520mm Loading height: 860mm Additional information: Plus pre-carriage / handling from storage location 26639 Wiesmoor: €1,280.00 net Chassis: Low-bed trailer Steel welded construction Turntable with heavy-duty ball race bearing Folding rear support Wheel chocks with holder Rear mudflaps across full width 1 plastic toolbox Preparation for widening to 3,000 mm (holes in outer frame with covers, not in rear bevel) Lashing rings for low-bed trailer 1 pair of lashing openings in the front beam on the cranked section, each rated 10 t 7 pairs of lashing pins recessed in the top and side of the outer frame, each rated 10 t 1 x in front on the cranked section 5 x in the low-bed section 1 x in the rear bevel 12 pairs of lashing holes in the outer frame, each rated 5 t (for securing straps) 5 x cranked section, 6 x low-bed, 1 x rear bevel Drawbar coupling (for turntable trailer) Drawbar with tested 40 mm towing eye Height adjustment of drawbar by spring Axles & suspension: Drum brake axles, manufacturer’s choice Laser axle/chassis alignment – reduces tire wear and fuel consumption Parabolic spring suspension with maintenance-free steel-rubber bushing and mechanical load equalization (rocker equalizer) Wheels and tires: 235 / 75 R 17.5” manufacturer’s choice Steel rims, dual arrangement, factory silver Brake system: 2-line compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connecting lines to the tractor unit, lines extended by approx. 60 cm Without ABS, but with mechanical ALB; maximum approved speed 60 km/h Electrics: 12 Volt, multi-chamber lights, no side LED (yellow) lighting, reflectors on side 2 white position lights at front 2 white/red marker lights at rear 1 x 7-pin 12 Volt plug at front, with connection cable, extended by approx. 60 cm 1 LED beacon with holder, switched via sidelights (lamp removable) 2 pairs of warning plates, double LED illuminated and extendable to 3,000 mm Floor: Cranked section at front with steel / checker plate covering Stowage box recessed in the ramp transition near the cranked section Nlsdpfxewlmr De Ab Hsc Then with 70 mm softwood flooring, steel / checker plate in the wheel arch area Rear bevel with 70 mm softwood floor Low-bed area incl. rear bevel 5,900 mm Ramps: Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Wood covering (front edge with steel/checker plate) Hydraulically operated via tractor PTO with throttle, operation LH side compartment Hydraulic connection with SVK plug NW 10/3, incl. hose Operating notes: For 10,000 kg axle load, a special permit is required, only indivisible loads allowed! The stated total weight is technically possible; depending on the load, it may not be possible to achieve total weight while complying with permissible axle, support, and kingpin loads. (Poor driving and tracking performance possible due to incorrect load distribution) Country of registration / Signs: Registration country: Germany With Dekra inspection and certificate, for max. 60 km/h approval, towing vehicle LoF (agricultural/forestry), (Switzerland max. 40 km/h approval possible) Prepared for double-line license plate holder Without contour marking / reflective tape per ECE R 048 Paintwork: Frame RAL 7021, black-grey "10 years warranty against rust-through" Drawbar hot-dip galvanized Ramps hot-dip

Stanje: novo, največja dovoljena obremenitev: 18.400 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 5.900 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 860 mm, skupna širina: 2.520 mm, Total weight: 24,000kg / 30,000kg Unladen weight: 5,600kg Payload: 18,400 / 24,400kg Overall length: 10,290mm Loading length: 5,900mm incl. rear bevel Width: 2,520mm Loading height: 860mm Further information: plus pre-carriage / provision ex storage location 26639 Wiesmoor: €1,280.00 / net Chassis Low-bed trailer Steel welded construction Turntable with robust ball bearing ring Rear support, foldable 2 wheel chocks with holders Rear splash guards full width (not in combination with forklift holder) 1 plastic toolbox, width=600 / height=425 / depth=460 mm, lockable Prepared for widening to 3,000 mm (holes in outer frame with covers, not in the rear bevel) Tie-down points low loader 1 pair of lashing cutouts recessed in front longitudinal member on cranked section, each rated 10 t 7 pairs of lashing mushrooms recessed at the top and side in the outer frame, each 10 t 1 x at the front on the cranked section 5 x in the low-bed 1 x in the rear bevel 12 pairs of lashing holes in the outer frame, each rated 5 t (for lashing strap hooks) 5 x cranked section, 6 x low-bed and 1 x rear bevel Drawbar equipment Turntable trailer Drawbar with certified 40 mm towing eye Drawbar height adjustment by spring Axles + Suspension Nlsdpfoynvrwox Ab Hoc Drum brake axles by manufacturer’s choice "Axles / chassis laser aligned" reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker balancing) Wheels and Tires 235 / 75 R 17.5" by manufacturer’s choice Steel twin rims, factory silver Braking system 2-line air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at front, with extension lines to engine vehicle, extension approx. 60 cm Without ABS, but with mechanical ALB, thus max. 60 km/h permitted Electrics 12 volts, multi-chamber lights, without lateral yellow LED lighting, side reflectors 2 white position lights front 2 white/red lane marker lights rear 1 x 7-pin 12V plug front, with extension cable approx. 60 cm 1 LED beacon with bracket, switched via sidelights (removable light) 2 pairs warning plates illuminated, extendable to 3,000 mm Floor Cranked section front with steel/chequer plate covering Stow box recessed in transition bevel to cranked section then approx. 70 mm softwood floor, in wheel arch area steel/chequer plate Rear bevel with 70 mm softwood floor Low-bed loading area incl. rear bevel 5900 mm Ramps Steel ramps approx. 3000 mm long, 750 mm wide, side-shiftable with timber covering (front area with steel/chequer plate) Hydraulic via tractor auxiliary drive with restrictor, operation side FR left Hydraulic connection with SVK plug NW 10/3 incl. connector hose Operating notes At 10,000kg axle load, an exemption permit is required, only indivisible loads permitted! The indicated total weight is technically possible; depending on the cargo, the permissible axle, support, and kingpin loads may not be reached (poor handling and tracking possible if load distribution is incorrect) Country of registration / plates Country of registration: Germany With Dekra approval and certificate, for max. 60 km/h registration, towing vehicle agricultural/forestry, (country of registration Switzerland max. 40 km/h possible) prepared for double-line license plate holder without outline marking / reflective strips according to ECE R 048, Paintwork Frame hot-dip galvanized incl. passivation "15 year warranty against penetra—"

Stanje: rabljeno, prva registracija: 09/2016, barva: drugo, Leto izdelave: 2016, Oprema: ABS, = Druge možnosti in oprema = - BPW osi - Dvižna os - Bobnaste zavore = Opombe = Nsdpfoy Avafsx Ab Helc Fliegl, 2016, BPW osi, 1. os dvižna, bobnaste zavore = Podatki o podjetju = Bančni podatki: Račun pri Rabobank: 39.33.10.655 IBAN: NL73RABO0393310655 SWIFT koda: RABONL2U - Pred transakcijo vedno preverite naše bančne podatke! - Vozila ni možno rezervirati brez pologa. - Pridržujemo si pravico do napak pri pisanju in besedilu za vsa ponujena vozila.