Faymonville Max510-Z-2-Atx-A-6.85 nakup rabljenega (68.112)

Stanje: novo, največja dovoljena obremenitev: 34.104 kg, skupna masa: 47.000 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, Further details here: Dedpfxev D Abge Aqqekr

Stanje: novo, skupna masa: 47.000 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, Technical Data MAX510-Z-2H-ATX-A-6.85-PA Speed: 80 km/h Gross weight: 47,000 kg Fifth wheel load: 23,000 kg Axle load: 24,000 kg Gooseneck length: 3,750 mm Loaded coupling height: 1,200 mm Rear swing radius: 2,300 mm Loading platform length: 6,850 mm Extendable by: 5,500 mm Loading height at max. load: 350 mm Chassis length: 2,600 mm Chassis rear loading height at max. load approx.: 1,005 mm Suspension travel: -150/+450 mm Axle spacing: 1,360 mm Overall width: 2,540 mm Gross weight depends on fifth wheel load. Low-bed: Low-bed with external beams, extendable version "SUPER LOW" design, length approx. 6,850 mm. Low-bed with fixed hardwood floor approx. 40 mm thick and mechanical locking device. Supply lines are routed safely within the extendable beams and automatically adjust to the respective low-bed length. 5 pairs of folding external lashing rings (LC 10,000 daN). 6 pairs of threaded blocks on the inner beam for mounting screwable RUD rings. Rear chassis: Rear chassis with closed outer frame, checker plate covering, and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear. 2 pairs of folding external lashing rings (LC 10,000 daN). 1 pair of flat lashing rings in trough (LC 8,000 daN+5,300 daN). 2 pairs of stake pockets for 100 x 50 mm plug-in uprights in outer frame Gooseneck: Gooseneck in SNT design for maximizing loading area length, length approx. 3,785 mm. Gooseneck hydraulically lift/lower and detachable. Technical fifth wheel load: 23,000 kg For tractor units: 4 x 2, 6 x 2, and 6 x 4 PENDLE AXLE: "PENDLE-AXLE", all axles hydro-mechanically forced steered. Burst protection valve on axle compensation cylinder with automatic RESET function. Hydraulic cylinders with shut-off valves and locking pin for securing in lifted position. Dkjdpfx Aqeizu Nwsqer Axles finished in 2 layers of single-color 2K paint (FAY-Gray-34-0260). Technical axle load: 12,000 kg Hydraulic axle compensation. Axle tools. Brake system: Brake system according to EU regulations with EBS-E (2S2M), without connection lines to the tractor. Electrical system: Electrical system according to EU regulations, 24 Volt lighting ASPÖCK-NORDIK (ASS3), ASPÖCK-UNIBOX at the front connection panel with 24N, 24S, and 15-pin sockets. Connections according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098. Steel construction: Steel structure made of high-strength fine-grained steel. Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: First-class, durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust primer. High-quality 2-component (2K) topcoat, single-color in RAL shades of choice. Rear section metallized and painted in RAL 9010 (pure white). No metallic paint available. Tyres: 245/70 R 17.5 3PMSF tyres, brand at manufacturer’s discretion. Load index (146/146F) Prepared to accommodate bolted container positioning devices for 1x 20' or 1x 40' container on the outer beams. Without container locks. - 2” king pin - Galvanized steel headboard, approx. 400 mm high - One spare wheel with holder in front of the headboard - Two wheel chocks with holder on the headboard - At the galvanized front connection panel, yellow-red air couplings - Steering from front and rear via remote cable control with push buttons, including single-track axle control (without installation on the tractor unit) Hydraulic connections from gooseneck to low-bed

Stanje: novo, največja dovoljena obremenitev: 44.000 kg, skupna masa: 61.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Further information here: Dksdpfx Aov D Abteqqor

Stanje: rabljeno, največja dovoljena obremenitev: 25.260 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, prva registracija: 03/2024, naslednji pregled (TÜV): 04/2027, Oprema: ABS, Izvleček opreme: Nosilna plošča: - Nizka nosilna plošča s centralnim nosilcem v izvlečni izvedbi, dolžina približno 6.750 mm. - 5 parov zank za pritrditev blaga, zunanji del je zložljiv (LC 5.000 daN). - 1 par zank za pritrditev blaga, zunanji del je zložljiv (LC 10.000 daN). - 1 par zank za pritrditev blaga, nameščen v ležečem položaju na zadnji strani nosilne plošče (LC 10.000 daN). - Napajalne cevi so zaščitene v centralnem nosilcu in se prilagodijo posamezni dolžini nizke nosilne plošče. "Žirafa": - "Žirafa", dolžina približno 3.900 mm. - Hidravlično pomična "žirafa" navzgor in navzdol, prav tako je mogoče podaljšati. - Tehnična nosilnost sedla: 23.000 kg. Zadnje podvozje: - Zadnje podvozje v kratki izvedbi z zaprtim zunanjim okvirjem in protidrsno kovinsko prevleko. - Podvozje z vedrom za bager, ki je v zadnji polovici zaprto za namestitev rezervoarjev za zrak. - 2 para zank za pritrditev blaga, zunanji del je zložljiv (LC 5.000 daN). - 1 par zank za pritrditev blaga, zunanji del je zložljiv (LC 10.000 daN). Osi: - BPW osi, hidro-mehanično prisilno krmiljene. - Tehnična nosilnost osi: 12.000 kg na os. - Zračna vzmetenje z ventilom za dvig in spuščanje. - Orodje za osi. Pnevmatike: - Pnevmatike 245/70 R 17.5 3PMSF, proizvajalec po naši izbiri. - Indeks nosilnosti (146/146F). Zavorna naprava: - Zavorna naprava v skladu z evropskimi predpisi, z EBS-E (2S2M), brez priključnih cevi za vlačilec. Jeklena konstrukcija: - Jeklena konstrukcija iz visoko trdnih finozrnatih jekel. - Kakovosti jekla: S355J2+N/S355MC (meja tečenja 355 MPa). - S690QL/S700MC (meja tečenja 690 MPa). Lakiranje: - Visokokakovostno dvokomponentno (2K) zaključno lakiranje, enobarvno v RAL 3002 karmin rdeča. Vključno s naslednjimi dodatnimi elementi opreme: - 2-palčni kraljevi člen. - Pocinkana jeklena sprednja stena, višina približno 400 mm. - Nosilec za rezervno kolo pred sprednjo steno. - Na pocinkani priključni letev na sprednji strani so nameščene rumeno-rdeče zračne spojke. - 4 klini z nosilcem (± 5 kg). - Pomikanje od spredaj in zadaj s pomočjo kabelskega daljinskega upravljalnika preko gumbov, z nadzorom ene sledi osi (brez namestitve na vlačilcu). - Elektro-hidravlična agregat (± 45 kg). - Rumena odsevna traku v skladu z evropskimi predpisi na strani, na izvlečnem delu in na zadnji strani prikolice. - 1 leseni blok, približno 500x250x200 mm. Djdpfxezdxlko Aqqekr - Nosilec za aluminijaste nagibne rampe na zadnji strani vozila. - Nosilec za rotacijsko luč na zadnji strani prikolice. - Ščitnik proti umazaniji na zadnji strani prikolice. - Evropski odsevni znaki (rdeč-rumen) na zadnji strani prikolice. - Na "žirafi" in na zadnji plošči, na levi in desni strani, je po en nosilec za opozorilne table, vključno z vtičnico. - Priročnik in opis na USB ključu. - Nalepke za omejitev hitrosti 80 km/h na zadnji in obeh straneh. - Manometer za merjenje obremenitve osi, vključno z diagramom obremenitve. Vključno s specialnimi dodatki: - Na "žirafi" so aluminijaste stranske stene in zadnja stena, ki se lahko pritrdijo, približno 2.440 x 400 mm (D x V). - Zadnje pocinkane stranske stene so odstranljive. (Dolžina nadgradnje približno 2.560 mm) (± 46 kg). - Na "žirafi" je ločen zračni priključek s pištolo za pihanje. - 2 delovni žarometa s stikalom na prikolici, nameščeni na desni in levi strani podesta "žirafe". - 6 parov žepov za stranske stene, približno 100 x 50 mm v zunanjem okvirju nosilne plošče, 2 para v zunanjem okvirju podvozja (± 29 kg). - Razširitve, pocinkane, izvlečne za pribli

Stanje: dober (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 10.500 kg, dovoljena osna obremenitev (os 2): 10.500 kg, dovoljena osna obremenitev (os 3): 10.500 kg, velikost pnevmatike: 235/75R17,5, barva: modra, Leto izdelave: 2005, = Dodatne možnosti in dodatna oprema = - Zračna vzmetenje - Centralno mazanje = Opombe = Splošni pogoji poslovanja podjetja Heinhuis veljajo za vse oglase, ponudbe in cenitve podjetja Heinhuis, za vsa sklenjena sporazuma s podjetjem Heinhuis in za pogajanja, ki jim predhodijo. S kakršnim koli odgovorom potrjujete veljavnost splošnih pogojev poslovanja podjetja Heinhuis in izjavljate, da ste se seznanili s temi splošnimi pogoji poslovanja. Naše cene so izvozne neto cene. = Dodatne informacije = Splošne informacije Letnik izdelave: 2005 Konfiguracija osi Velikost pnevmatik: 235/75R17,5 Znamka osi: BPW Zadnja os 1: Dvojne pnevmatike; Največja obremenitev osi: 10500 kg; Krmilna; Globina profila pnevmatike leve notranje strani: 70 %; Globina profila pnevmatike leve zunanje strani: 70 %; Globina profila pnevmatike desne notranje strani: 70 %; Globina profila pnevmatike desne zunanje strani: 70 % Dkedpjztbllofx Aqqer Zadnja os 2: Dvojne pnevmatike; Največja obremenitev osi: 10500 kg; Krmilna; Globina profila pnevmatike leve notranje strani: 70 %; Globina profila pnevmatike leve zunanje strani: 70 %; Globina profila pnevmatike desne notranje strani: 70 %; Globina profila pnevmatike desne zunanje strani: 70 % Zadnja os 3: Dvojne pnevmatike; Največja obremenitev osi: 10500 kg; Krmilna; Globina profila pnevmatike leve notranje strani: 70 %; Globina profila pnevmatike leve zunanje strani: 70 %; Globina profila pnevmatike desne notranje strani: 70 %; Globina profila pnevmatike desne zunanje strani: 70 % Zadnja os 4: Dvojne pnevmatike; Največja obremenitev osi: 10500 kg; Krmilna; Globina profila pnevmatike leve notranje strani: 70 %; Globina profila pnevmatike leve zunanje strani: 70 %; Globina profila pnevmatike desne notranje strani: 70 %; Globina profila pnevmatike desne zunanje strani: 70 % Teže Lastna teža: 15.000 kg Nosilnost: 45.000 kg Skupna dovoljena masa: 60.000 kg Stanje Tehnično stanje: dobro Optično stanje: dobro = Informacije o podjetju = Za več informacij:

Stanje: rabljeno, največja dovoljena obremenitev: 33.155 kg, skupna masa: 47.000 kg, konfiguracija osi: 2 osi, prva registracija: 06/2023, naslednji pregled (TÜV): 06/2024, Oprema: ABS,

Stanje: rabljeno, največja dovoljena obremenitev: 30.660 kg, skupna masa: 43.000 kg, konfiguracija osi: 2 osi, prva registracija: 03/2024, naslednji pregled (TÜV): 03/2025, Oprema: ABS, Celotno našo ponudbo vozil, vključno z vozili, ki so na voljo takoj ali v kratkem času, najdete na naši spletni strani. Izvleček iz opreme. Celotna oprema na zahtevo. Dsdpjzm D Ucsfx Aqqekr Nosilna ploščad * Nizka nosilna ploščad z osrednjim nosilcem v izvlečni izvedbi * Dolžina približno 6.750 mm * 5 parov zank za pritrditev tovora, z možnostjo obračanja navzven (LC 5.000 daN) * 1 par zank za pritrditev tovora, z možnostjo obračanja navzven (LC 10.000 daN) * 1 par zank za pritrditev tovora, horizontalno nameščenih na zadnji strani nosilne plošče (LC 10.000 daN) * Napajalne cevi so zaščitene in nameščene v osrednjem nosilcu ter se prilagajajo različnim dolžinam nizke nosilne plošči. Vratna prikolica (»gosi«) * Dolžina približno 3.900 mm * Vratna prikolica, hidravlično dvigljiva in spuščana ter izvlečna * Tehnična obremenitev sedla: 23.000 kg Zadnje podvozje * Zadnje podvozje v kratki izvedbi z zaprtim zunanjim okvirjem in valjano jekleno prevleko * Podvozje z bagerjem, zadnja polovica je zaprta za namestitev rezervoarjev za zrak * 2 para zank za pritrditev tovora, z možnostjo obračanja navzven (LC 5.000 daN) * 1 par zank za pritrditev tovora, z možnostjo obračanja navzven (LC 10.000 daN) Osi * Os BPW, hidravlično-mehansko nadzorovana * Tehnična obremenitev osi: 12.000 kg na os * Zračna vzmet z ventilom za dvig in spuščanje * Orodje za osi Pnevmatike * 245/70 R 17.5 3PMSF – izbira proizvajalca * Indeks obremenitve (146/146F) Zavorna naprava * V skladu z zakonodajo EU, s sistemom EBS-E (2S2M) brez povezovalnih cevi do vlečne enote Jeklena konstrukcija * Iz visoko trdnih jekel * Vrste jekla: S355J2+N/S355MC (meja tečenja 355 MPa), S690QL/S700MC (meja tečenja 690 MPa) Barvanje * Kvalitetna 2-komponentna (2K) barva * Končna barva, enobarvna, v RAL 3002, karmin rdeča Vključno z naslednjo dodatno opremo: * 2 palčni kraljevi zatič * Pocinkana jeklena sprednja stena, približno 400 mm visoka * Nosilec za rezervno kolo pred sprednjo steno * Na pocinkani priključni letev spredaj, rumeno-rdeče zračne spojke * 4 kosi klinih s pritrdilnim nosilcem (± 5 kg) * Vodenje zadnje osi, od spredaj in zadaj, prek kabelske daljinske upravljalne enote z gumbi, z nadzorom položaja osi (brez vgradnje v vlečno enoto) * Električno-hidravlična enota (± 45 kg) * Rumeni reflektorski trak v skladu z zakonodajo EU, stransko, na izvlečni plošči in zadaj na prikolici * 1 lesen blok, približno 500x250x200 mm * Držalo za aluminijaste rampe na zadnji strani vozila * Držalo za okroglo luč na zadnji strani prikolice * Blatnik na zadnji strani prikolice * Evropske reflektorske table (rdeče-rumene) na zadnji strani prikolice * Na vratni prikolici in zadnji plošči, na levi in desni strani, držalo za opozorilne table, vključno z vtičnico * Priročnik in opis na USB-ključu * Nalepka za omejitev hitrosti 80 km/h, zadaj in na obeh straneh * Manometer za obremenitev osi, za ugotavljanje obremenitve osi, vključno z diagramom obremenitve Vključno s posebno dodatno opremo * Na vratni prikolici, aluminijaste stranske in zadnje stene, vstavljive, približno 2.440 x 400 mm (D x V) * Zadnji pocinkani vstavni profili so odstranljivi. (Dolžina nadstavka približno 2.560 mm). (± 46 kg) * Na vratni prikolici ločena zračna priključna točka s pištolo za polnjenje z zrakom * 2 delovna reflektorja s stikalom na prikolici, nameščena na podstavku vratne prikolice, na levi in desni strani * 6 parov žepov za vstavne profile, približno 100 x 50 mm, v zunanjem okvirju nosilne plošče * 2 para v zunanjem okvirju podvozja (±

Stanje: rabljeno, barva: rdeča, Leto izdelave: 2012, Faymonville STBZ-4VA. Letnik: 2012. 10-tonske osi SAF. Teža: 22.500 kg. Nosilnost: 57.500 kg. Maksimalna teža: 80.000 kg. Nosilnost pripetnice: 40.000 kg. EBS ABS ALB. Hidravlični sistem prikolice, napajan iz električnega sistema NATO. Hidravlično odstranljiva pripetnica (gooseneck). Raztegljiv za 5 metrov. Djdpfxsznbzcs Aqqskr 2 rezervni pnevmatiki. Prevlečen s cinkom! Zračno vzmetenje. Platforma za bager: 5600 x 950 mm. Daljinski upravljalnik na kablu. Dimenzije: Priključna glava: D: 4500 mm. Š: 2550 mm. V: 1750 mm. Višina pripetnice: 1250 mm. Platforma: D: 7550 mm. Š: 2750 mm. V: 530 mm. Debelina platforme: 350 mm. Zadnji del prikolice: D: 5600 mm. Š: 2750 mm. V: 1000 mm. Pnevmatike: 235/75R17,5, 80 %. Prikolica D-2. Letnik: 2012. 10-tonske osi SAF. Teža: 4300 kg. Maksimalna teža: 38.000 kg. Nosilnost pripetnice: 18.000 kg. Zračno vzmetenje. Pnevmatike: 235/75R17,5, 70 %. Nemška prikolica! ID št.: 629. Splošni pogoji Heinhuis veljajo za vse oglase, ponudbe in cenitve podjetja Heinhuis, za vsa sklenjena sporazumevanja s podjetjem Heinhuis ter za pogajanja, ki jim predhodijo. Z vsakim obliko odziva soglašate z veljavnostjo splošnih pogojev podjetja Heinhuis in izjavljate, da ste se seznanili s temi splošnimi pogoji. Naše cene so izvozne neto cene. = Dodatne informacije = Letnik izdelave: 2012. Lastna teža: 22.500 kg. Nosilnost: 57.500 kg. Dovoljena skupna masa: 80.000 kg. Raztegljiva nadgradnja: Da. = Informacije o podjetju = Za več informacij:

Stanje: rabljeno, barva: rdeča, Leto izdelave: 2011, Faymonville STBZ-4VA. Letnik: 2011. 10-tonske osi SAF. Teža: 22.500 kg. Nosilnost: 57.500 kg. Maksimalna teža: 80.000 kg. Obremenitev pete: 40.000 kg. EBS ABS ALB. Hidravlični sistem prikolice, napajan z napetostjo po standardu NATO. Hidravlično odstranljiva prikolica z vrtljivim priklopom (gooseneck). 5 metrov podaljšljiva. Dksdpsznby Eofx Aqqsr 2 nadomestni pnevmatiki. Prevlečena s cinkom! Zračna vzmetitev. Most za bager: 5600 x 950 mm. Daljinski upravljalnik s kablom. Dimenzije: Vrat: D: 4500 mm. Š: 2550 mm. V: 1750 mm. Višina pete: 1250 mm. Platforma: D: 7550 mm. Š: 2750 mm. V: 530 mm. Debelina platforme: 350 mm. Zadnji del prikolice: D: 5600 mm. Š: 2750 mm. V: 1000 mm. Pnevmatike: 235/75R17,5, 70 %. Prikolica D-2. Letnik: 2012. 10-tonske osi SAF. Teža: 4300 kg. Maksimalna teža: 38.000 kg. Obremenitev pete: 18.000 kg. Zračna vzmetitev. Pnevmatike: 235/75R17,5, 70 %. Nemška prikolica! Številka ID: 624. Splošni pogoji poslovanja podjetja Heinhuis veljajo za vse oglase, ponudbe in cenitve podjetja Heinhuis, za vsa sklenjena sporazuma s podjetjem Heinhuis ter za pogovore, ki jim predhodijo. Z vsakim obliko odziva potrdite veljavnost splošnih pogojev poslovanja podjetja Heinhuis in izjavljate, da ste se seznanili s temi splošnimi pogoji poslovanja. Naše cene so izvozne neto cene. = Dodatne informacije = Letnik: 2011 Prazna teža: 22.500 kg Nosilnost: 57.500 kg Maksimalna dovoljena teža: 80.000 kg Podaljšljiv nadgrad: Da = Podatki o podjetju = Za več informacij:

Stanje: rabljeno, barva: rdeča, Leto izdelave: 2012, Faymonville STBZ-4VA. Letnik: 2012. 10-tonske osi SAF. Teža: 22.500 kg. Dkjdpeznbvtsfx Aqqsr Nosilnost: 57.500 kg. Maksimalna teža: 80.000 kg. Nosilnost petega kolesa: 40.000 kg. EBS ABS ALB. Hidravlični sistem prikolice, ki deluje na električnem sistemu NATO. Hidravlična, odstranljiva prikolica s krmilnim drogom (gooseneck). 5 metrov podaljšljiva. 2 rezervni pnevmatiki. Cinkano! Zračna vzmetitev. Nosilna plošča za bager: 5600 x 950 mm. Daljinski upravljalnik s kablom. Dimenzije: Krmilni drog: D: 4500 mm. Š: 2550 mm. V: 1750 mm. Višina petega kolesa: 1250 mm. Ploščad: D: 7550 mm. Š: 2750 mm. V: 530 mm. Debelina ploščadi: 350 mm. Zadnja stran prikolice: D: 5600 mm. Š: 2750 mm. V: 1000 mm. Pnevmatike: 235/75R17,5 80 %. Prikolica za priklop (D-2). Letnik: 2012. 10-tonske osi SAF. Teža: 4300 kg. Maksimalna teža: 38.000 kg. Nosilnost petega kolesa: 18.000 kg. Zračna vzmetitev. Pnevmatike: 235/75R17,5 70 %. Nemška prikolica! ID št.: 589. Splošni pogoji Heinhuis veljajo za vsa oglaševanja, ponudbe in cenitve podjetja Heinhuis, vse pogodbe, ki jih sklene Heinhuis, in za pogajanja, ki jim sledijo. S kakršnim koli odgovorom potrjujete veljavnost splošnih pogojev podjetja Heinhuis in izjavljate, da ste se z njimi seznanili. Naše cene so izvozne neto cene. = Dodatne informacije = Letnik: 2012 Lastna teža: 22.500 kg Nosilnost: 57.500 kg Dovoljena masa: 80.000 kg Podaljšljiva nadgradnja: Da = Informacije o podjetju = Za več informacij:

Stanje: rabljeno, barva: rdeča, Leto izdelave: 2012, Faymonville STBZ-4VA. Letnik: 2012. 10-tonske osi SAF. Teža: 22.500 kg. Nosilnost: 57.500 kg. Maksimalna teža: 80.000 kg. Nosilnost vpetja: 40.000 kg. Sistem EBS ABS ALB. Hidravlični sistem prikolice, napajan z električnim sistemom po standardu NATO. Hidravlična, odstranljiva prikolica s prednjim podaljškom (gooseneck). 5 metrov podaljšek. 2 rezervni pnevmatiki. Cinkana zaščita! Zračna vzmetitev. Ploščad za bager: 5600 x 950 mm. Daljinski upravljalnik na kablu. Dimenzije: Prednji del: D: 4500 mm. Š: 2550 mm. V: 1750 mm. Višina vpetja: 1250 mm. Ploščad: D: 7550 mm. Š: 2750 mm. V: 530 mm. Debelina ploščadi: 350 mm. Zadnji del prikolice: D: 5600 mm. Š: 2750 mm. V: 1000 mm. Pnevmatike: 235/75R17,5, 70 % obrabe. Prikolica D-2. Letnik: 2012. 10-tonske osi SAF. Teža: 4300 kg. Maksimalna teža: 38.000 kg. Nosilnost vpetja: 18.000 kg. Zračna vzmetitev. Pnevmatike: 235/75R17,5, 70 % obrabe. Nemška prikolica! ID št.: 588. Splošni pogoji poslovanja podjetja Heinhuis veljajo za vsa oglaševanja, ponudbe in kalkulacije podjetja Heinhuis, za vsa sklenjena sporazuma s podjetjem Heinhuis ter za pogajanja, ki jim sledijo. S kakršnim koli odgovorom izražate strinjanje s splošnimi pogoji poslovanja podjetja Heinhuis in izjavljate, da ste se seznanili s temi splošnimi pogoji poslovanja. Naše cene so izvozne neto cene. = Dodatne informacije = Dsdpfxoznbt Es Aqqjkr Letnik: 2012 Lastna teža: 22.500 kg Nosilnost: 57.500 kg Maksimalna dovoljena masa: 80.000 kg Podaljšek: Da = Podatki o podjetju = Za več informacij:

Stanje: rabljeno, največja dovoljena obremenitev: 25.630 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, prva registracija: 11/2024, naslednji pregled (TÜV): 11/2026, Oprema: ABS,

Stanje: novo, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 10.000 kg, dovoljena osna obremenitev (os 2): 10.000 kg, dovoljena osna obremenitev (os 3): 10.000 kg, dolžina tovornega prostora: 29.000 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 2.850 mm, skupna dolžina: 29.000 mm, skupna širina: 2.540 mm, skupna višina: 2.850 mm, vzmetenje: zrak, velikost pnevmatike: 385/65-R22.5, Leto izdelave: 2026, Oprema: ABS, - BPW-osovine - EBS Djdpfx Aozhxgieqqskr - Zračno vzmetenje - Kolutne zavore - Centralno mazanje NOVO MAX210-Z-3AA-13.60-22.5-2.54, neposredno na zalogi Tehnični podatki MAX210-Z-3AA-13.60-22.5-2.54 Skupna masa: 48.000 kg / Pritisk na sklopki: 18.000 kg / Osna obremenitev: 30.000 kg / Lastna teža: 11.456 kg / Nosilnost cca.: 36.544 kg / Višina sklopke (naloženo): 1.150–1.250 mm / Polmer obračanja: 2.300 mm Dolžina nakladalne površine: 13.600 mm / 2-krat izvlečna (2 x 770 mm) do 2.900 mm / Medosna razdalja: 1.810 mm Tehnični opis: Izvlečna nakladalna površina s pnevmatsko zaporo / V osrednjem škatlastem okvirju je fiksna vmesna miza ± 250 mm / 8 parov navzven preklopnih pritrdilnih ušes (LC 5.000 daN) / 3 pari navzven preklopnih pritrdilnih ušes (LC 10.000 daN) / Izrezi v zunanjem okviru za obešanje trakov (LC 2.000 daN) Pnevmatike: Pnevmatike 385/65 R22.5 (znamka: Goodyear) Sistem za nadzor tlaka v pnevmatikah (TPMS): TPMS v skladu z ECE R 141 Osovine: BPW-osovine s kolutnimi zavorami, zračno vzmetene z dvižno/spustnim ventilom. Vse osi hidromehansko prisilno krmiljene. Tehnična osna obremenitev: 10.000 kg (ET 0) Zavorni sistem: WABCO zavorni sistem v skladu z EU-predpisi z EBS-E sistemom (2S2M), brez priključnega kabla na traktor. Jeklena konstrukcija: Jeklena konstrukcija iz visokokakovostnega drobnozrnatega jekla. Kakovost jekla: S355J2+N/S355MC (meja elastičnosti 355 MPa) / S690QL/S700MC (meja elastičnosti 690 MPa) Električna napeljava: Električna napeljava v skladu z EU predpisi, osvetlitev 24 V ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX na pocinkani priključni letvi spredaj s 24N-, 24S- in 15-polnimi vtičnicami. Priključki po ISO / 24N ISO-1185 / 24S ISO-3731 / 15-polni ISO-12098 Opozorilne table: Pod gosjim vratom in zadaj, levo in desno, nosilec za opozorilne table z vtičnico. Opcije: • Manevriranje spredaj in zadaj prek kablovskega daljinca z nadzorom PDC osvetlitve za poravnavo osi (brez montaže na traktor) • Elektrohidravlična enota (cca. 45 kg) • 2 zagozdi za kolesa z nosilcem na pregradi • Kraljevski zatič 2" • Pocinkana jeklena pregrada, cca. 1.600 mm visoka, EN12642-XL • Bela odsevna letev v skladu z EU-predpisi po celotni dolžini in širini. Rdeča zadaj. • EU označevalne table (rdeče-rumene) zadaj. • Nosilec za rotacijsko luč zadaj. • Nakladalna tla iz 30 mm debelega trdega lesa, ojačana z omega profili (cca. 298 kg). • 10 parov držal za kole (cca. 100 x 50 mm), v zunanjem okviru nakladalnega poda. • 1 nosilec za rezervno kolo pod nakladalnim podom desno. • BEKAMAX (Pico) centralni sistem mazanja z 2 črpalkama. • 6 parov izrezov v nakladalnem podu za WADER kontejnerske ključavnice, za 1 x 20', 2 x 20', 1 x 40' ali 1 x 45' kontejner. • 5 parov profilov za kole, nameščenih prečno v nakladalno dno, za kole 100 x 50 mm • Pocinkan prostor za shranjevanje pod nakladalnim podom (2.390 x 720 x 400 mm) • Kljuke za vrvi (8 mm), na vsakih cca. 500 mm pod robnim profilom gosjega vratu in nakladalnega poda • Lestev za vzpenjanje, nameščena levo v smeri vožnje • Inox orodjarna • LED razsvetljava • 10 parov vtičnih kolov (100 x 50 mm, dolžina 1.000 mm) • 8 kontejnerskih ključavnic Splošne informacije Letnik izdelave: 2026...

Stanje: rabljeno, prva registracija: 07/2012, skupna dolžina: 17.800 mm, skupna širina: 2.750 mm, Leto izdelave: 2012, Dodatne informacije: Znamka: FAYMONVILLE Model: STBZ-4VA + prikolica D-2 Konstrukcija: nizkopodvozna prikolica (nizka platforma, D=8143–13173 mm / Š=2750 mm / V=510 mm) Letnik: 07.2012 Vzmetenje: zračna vzmet Zavore: bobnaste Dimenzije: D/Š: 17800 mm / 2750 mm Mase: polna/prazna: 80000 kg / 22250 kg (brez prikolice) RAZTEZLJIVA / VSE OSI SO USMERJENE Letnik modela: 2012 Vrsta vzmetenja: zračna Zavore: bobnaste Vrsta vzmetenja: zračna Zavore: bobnaste Krmiljenje: krmiljeno Vrsta vzmetenja: zračna Zavore: bobnaste Dkedpfx Aszp H Tajqqor Krmiljenje: krmiljeno Vrsta vzmetenja: zračna Zavore: bobnaste Krmiljenje: krmiljeno = Več informacij = Prazna teža: 22.250 kg Nosilnost: 57.750 kg Največja dovoljena masa: 80.000 kg

Stanje: novo, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, 3-axle MULTIMAX PLUS low-bed semi-trailer, air-suspended and hydraulically forced-steered axles. Technical Data MultiPLUS-Z-3L-UB-12AT-9.60-17.5-2.54-GR Maximum speed: 80 km/h (legal) Gross vehicle weight: 49,500 kg 31,500 kg Fifth wheel load: 18,000 kg Axle load: 31,500 kg 31,500 kg Gooseneck length approx.: 3,900 mm Gooseneck width approx.: 2,480 mm Turning radius king pin to rear approx.: 2,100 mm Coupling height loaded approx.: 1,205 mm Loading platform length approx.: 9,600 mm Extendable by approx.: ? Loading platform width approx.: 2,540 mm Load height at max. load approx.: 890 mm Suspension travel approx.: -55/+145 mm Axle spacing: 1,360 mm Gross weight dependent on fifth wheel load: Yes Special permit required if exceeding country-specific legislation: Technical Description Gooseneck: Gooseneck in SNT design to optimize loading platform length, length approx. 3,900 mm, rear with bevel of approx. 1,000 mm x 6°. Technical fifth wheel load: 18,000 kg. For tractor units: 4x2 and 6x2. Loading platform: Dedjizu Ntjpfx Aqqjkr Loading platform approx. 9,600 mm in length with rear bevel approx. 900 mm x 6°. Loading area after gooseneck hydraulically liftable and lowerable, length approx. 3,000 mm, load capacity up to approx. 9,000 kg. Ramps: DR-10-900-4920-GR-HV-AXS One pair of two-piece AXS steel ramps, approx. 4,920 mm long and approx. 900 mm wide. Open grating surface. Hydraulically folding ramp tips. Ramps individually hydraulically adjustable by approx. 235 mm outward and approx. 365 mm inward. Maximum load and ramp angle according to technical datasheet: C470319 Maximum gradient angle with lowered loading area: 9° Axles and Suspension: BPW axles and suspension, all axles hydro-mechanically forced-steered. Technical axle load: 12,000 kg Air suspension with lifting and lowering valve. Axle tools. Tyres: 235/75 R 17.5 3PMSF twin tyres. Brand at our discretion Load index 143/141J (144/144F) Brake System: WABCO EBS-E brake system according to EU regulations. No connecting cable to the tractor unit included. Lighting System: 24V lighting system in "ASPÖCK-NORDIK full LED" version according to EU regulations. (ASS 3) Metallisation: Complete HRM metallisation (High Resistance Metallisation) Entire steel structure shot-blasted, then hot-finished with ZINACOR 850 (Zinc 85% - Aluminium 15%). 6-Coat Paint Treatment: Entire steel structure shot-blasted after welding. 1 coat zinc-based primer, 1 coat adhesion primer. Topcoat consisting of 2 layers of 2K paint (acrylic) in a single RAL shade of choice, followed by cavity sealing with special wax. Rims in silver. Multi-colour and special coatings available at extra charge. Steel Construction: High-strength fine-grain steel structure. Steel grades: S355J2+N/S355MC (min. yield strength 355MPa) S690QL/S700MC (min. yield strength 690MPa) Welders certified to DIN-EN 287-1. MAG-welding process to EN ISO 4063. Shielding gas M21 according to EN ISO 14175 Front bulkhead made of steel, detachable, approx. 400 mm high Connector strip for supply lines to the tractor unit, mounted at the height of the outer frame profile. ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets. 24N connection according to ISO-1185 24S connection according to ISO-3731 15-pin connection according to ISO-12098 If your pin configuration deviates from the ISO standard, please inform us. Anderson socket at the front connection strip. Rema 78051-00 & Amp. 150 V. Cable for supplying the electro-hydraulic power unit and/or

Stanje: novo, največja dovoljena obremenitev: 30.190 kg, skupna masa: 43.000 kg, konfiguracija osi: 2 osi, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available for immediate or short-term delivery, on our website. The following is an excerpt from the specifications. Complete equipment details available upon request. Load area: - Lowbed with external beams, extendable version in SUPER LOW design, length approx. 6,850 mm - Lowbed with fixed hardwood floor, approx. 40 mm thick, with mechanical locking - Supply lines are protected within the extendable beams and automatically adjust to the current lowbed length - 5 pairs of lashing rings, foldable outward (LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for mounting bolted RUD rings Gooseneck: - Gooseneck in SNT design to optimize load area length, approx. 3,750 mm - Gooseneck hydraulically lift/lowerable and detachable - Technical fifth wheel load: 23,000 kg - For tractor units: 4x2, 6x2 Rear chassis: - Rear chassis in short version with closed outer frame and checker plate cover - Chassis with excavator recess, closed in the rear half to accommodate air tanks - 2 pairs of lashing rings, foldable outward (LC 5,000 daN) - 1 pair of lashing rings, foldable outward (LC 10,000 daN) - 1 pair of lashing rings lying flat, at the front & rear of the chassis (LC 10,000 daN) Axles: - BPW axles, hydro-mechanically forced-steered - Technical axle load: 12,000 kg per axle - Air suspension with raise/lower valve Tyres: - Tyres 245/70 R 17.5 3PMSF, manufacturer of our choice - Load index (146/146F) - TPMS tyre pressure monitoring system according to ECE R 141 - Data transmission to tractor via standardized EBS interface (ISO 11992) - For proper display, the tractor must be capable of transmitting and displaying these data Braking system: - Braking system according to EU regulations with EBS-E (2S2M) Electrical system: - Electrical system in accordance with EU regulations, 24-volt lighting ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with turn indicator - ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Dkjdoxarl Njpfx Aqqsr Steel construction: - Steel construction of high-strength fine-grain steels - Steel qualities: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: - Entire steel construction automatically shot-blasted after welding - Second blasting with corundum for optimal coating adhesion - Complete vehicle chassis coated with HRM metallization using ZINACOR 850 (85% zinc / 15% aluminium) for premium corrosion protection - Top coat with 2 layers of 2K paint in RAL 3002 carmine red, single-color, according to RAL system 841GL - Rims in silver - Rear section metallized and painted in RAL 9010 (pure white) - No metallic paint possible - Paint system tested in salt spray test according to ISO 9227-NSS - Cavity sealing with special wax Including the following additional equipment: - 2-inch kingpin - One galvanized steel front wall, approx. 400 mm high - Remote-steered axles from front and rear via cable control with pushbuttons, with single-track monitoring (without installation in tractor unit) - Hydraulic connections from gooseneck to lowbed with multi-coupler instead of threaded couplings - Electro-hydraulic power unit - Prepared for installation of bolted container mounts for 1x 20' or 1x 40' container on outer beams - Without container locks

Stanje: novo, lastna masa: 12.800 kg, največja dovoljena obremenitev: 36.200 kg, skupna masa: 49.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.850 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 375 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, obratovalna teža: 12.800 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimised loading platform length, approx. 3,750 mm in length - Gooseneck can be raised/lowered hydraulically and is detachable - Technical fifth wheel load: 25,000 kg - For tractor units: 4 x 2, 6 x 2, and 6 x 4 Loading platform: - Low-bed with external beams, designed as a telescopic vessel bridge in low-profile construction with front extension - Length 6,850 mm x width 2,540 mm - One locking position approx. every 1,000 mm on the extension Rear running gear: - Rear running gear with closed outer frame featuring checker plate cover and continuous prism excavator recess, approx. 1,250/700 x 505 mm, open at the rear Axles, suspension and tyres: - “PENDLE-AXLE”, all axles force-steered hydro-mechanically - Hose rupture valves on axle equalising cylinders with automatic reset function - Hydraulic cylinders with shut-off valves and pre-locking pins for securing in raised position - Final coat for axles with two layers of 2K acrylic paint, single-colour in “FAY-Grey-34-0260” - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres: 245/70 R 17.5 - TPMS tyre pressure monitoring system in accordance with ECE R 14 - TPMS sensors installed in all wheels, incl. spare wheels Included accessories: - Plug-in steel front wall, approx. 400 mm high - 3 kW electro-hydraulic unit for hydraulic operations, except for hydraulic winches - One spare wheel with mounting adapter - External beams of the gooseneck with mounting holes for bolt-on lashing rings - Plug-in ALU side walls on the gooseneck, approx. 400 mm high, anodised - One plug-in ALU rear wall on the gooseneck, approx. 400 mm high, anodised - Checker plate covering on the gooseneck - Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide - Operating area lighting at the gooseneck with on/off switch - Hydraulic traverse to support the gooseneck on the tractor or a dolly - 2" king pin - Anti-slip stickers on the left chamfer of the gooseneck - The rear upper area of the gooseneck is closed with a removable cover - 4 wheel chocks with holders - Hydraulic connections from gooseneck to low-bed with multi-coupling instead of screw couplings - 1 pair of steel ramps with climbing strips and retaining bolts for bridging the low-bed mounting hooks - The ramps can be placed over or between the hooks - Mounting option for steel drive-on ramps at the rear between the external beams of the gooseneck Dedpfxjvy Edco Aqqjkr - Prepared for bolt-on container locks for 1 x 20ft on the external beams - Mechanical pin and lug coupling from low-bed to running gear for exchanging the loading platform or inserting extension beams - With electro-pneumatic-hydraulic couplings - The outer beams of the low-bed are coated with painted-on sand layer as anti-slip protection - Removable (galvanised) load floor, can be inserted in 3 elements between the external beams, with hardwood surface - Foldable extensions, approx. 230 mm per side - Hanging strip at the front of the rear running gear to the low-bed for loose approach ramps - 2 pairs of stake pockets recessed into the outer frame of the running gear, for plug-in stakes approx. 100 x 50 mm - Hanging strip for loose ALU approach ramps at the rear cross member of the vehicle - Central lubrication system with 2 pumps - Radio and cable remote control - 4 extendable warning signs, approx. 423 mm x 423 mm - Numerous lashing positions

Stanje: novo, največja dovoljena obremenitev: 25.645 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment list. Full equipment details available upon request. Loading Platform: - Low-bed with central beam in extendable design, length approx. 6,750 mm - 5 pairs of lashing rings, foldable outwards (LC 5,000 daN) - 1 pair of lashing rings, foldable outwards (LC 10,000 daN) - 1 pair of flush-mount lashing rings at the rear of the loading platform (LC 10,000 daN) Gooseneck: - Gooseneck hydraulically lift/lowerable and detachable Rear Running Gear: - Rear running gear in short version with closed outer frame and tread plate cover - Running gear with excavator trough, trough rear half enclosed for housing air tanks - 2 pairs of lashing rings, foldable outwards (LC 5,000 daN) - 1 pair of lashing rings, foldable outwards (LC 10,000 daN) - 1 pair of flush-mount lashing rings at the rear of the running gear (LC 10,000 daN) Axles: - BPW axles, hydromechanically forced steering - Air suspension with lifting and lowering valve Tyres: - Tyres 245/70 R 17.5 3PMSF - TPMS: tyre pressure monitoring system as per ECE R 141 Brake System: - Wabco braking system in compliance with EU regulations with EBS-E (2S2M) Paintwork: - High-quality 2-component (2K) top coat, single colour RAL 3000 flame red Includes the following additional equipment: - 2 king pins - One galvanised steel front wall, approx. 400 mm high - Remote steering adjustment from front and rear via cable remote control with pushbuttons, including single-track axle alignment (without installation in the tractor unit) - Electro-hydraulic unit - Axle load gauge including axle load diagram - On the gooseneck, aluminium side boards and rear wall, plug-in type, approx. 2,440 x 400 mm (L x H). The rear galvanised plug-in stanchions are removable. (Upper body length approx. 2,560 mm) - Separate air connection with blow gun on the gooseneck - 2 work lights with switch on the trailer, mounted on left and right sides of the gooseneck platform - One INOX toolbox, approx. 1,350 x 400 x 400 mm, mounted on the gooseneck - 6 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the loading platform, 2 pairs in the rear frame of the running gear - Galvanised, extendable load width extensions approx. 230 mm per side Djdpoxf Silofx Aqqskr - Hydraulic connections from the gooseneck to the low-bed with multi-coupling instead of screw couplings. No guarantee on seals. - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard grease NLGI-2 with removable pump protection - 2 pairs of WADER container pockets in the loading platform, for 1x 20’ container - One removable galvanised intermediate platform with 1 pair of WADER container pockets - 1 pair of steel ramps to bridge over the low-bed’s loading hooks - Loading platform with painted sand layer as anti-slip protection - HRM metallization (High Resistance Metallization)

Stanje: rabljeno, lastna masa: 11.800 kg, največja dovoljena obremenitev: 36.200 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2022, skupna dolžina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R17,5, Oprema: ABS, Faymonville Telemax F-S43 Low Loader | 3 axles steered via remote control | Heavy-duty lashing points | SAF axles | extendable | insertable stanchions | Tyres: 245/70 R17.5 | Gross weight: 48,000 kg, payload: 36,200 kg | 13,500 mm + 7,900 mm + 8,100 mm | Subject to errors, input mistakes, and prior sale. Dsdpfjwm I Ipox Aqqekr

Stanje: rabljeno, Leto izdelave: 2005, Faymonville STBZ-2WAA. Letnik: 2005. 10,5-tonske osi SAF. Teža: 11.760 kg. Nosilnost: 27.240 kg. Maksimalna teža: 39.000 kg. Nosilnost priklopne glave: 18.000 kg. Hidravlični sistem, združljiv z NATO. Radijski daljinski upravljalnik. Hidravlični priklop (gooseneck). 2 x razširljivo: Dkodpfxszmt Ixs Aqqjr - 1: 5,50 metra. - 2: 5,10 metra. Skupna dolžina v razširjenem stanju: 10,6 metra. Zračna vzmetitev. Servovolan za 2 krmilni osi. 3 odstranljive ploščadi. Dimenzije: Prednji del (vrat): D: 3750 mm. Š: 2480 mm. V: 1600 mm. Višina priklopne glave: 1300 mm. Ploščad: D: 6850 mm. Š: 2550 mm. V: 570 mm. Debelina ploščadi: 350 mm. Zadnji del prikolice: D: 2800 mm. Š: 2550 mm. V: 950 mm. Pnevmatike: 245/70R17,5, 40 %. ID št.: 642. Splošni pogoji poslovanja družbe Heinhuis veljajo za vse oglase, ponudbe in cenitve družbe Heinhuis, za vse pogodbe, sklenjene s strani družbe Heinhuis, in za pogajanja, ki predhodijo tem pogodbam. S kakršnim koli odgovorom potrjujete veljavnost splošnih pogojev poslovanja družbe Heinhuis in izjavljate, da ste se seznanili s temi splošnimi pogoji poslovanja. Naše cene so izvozne neto cene. = Dodatne informacije = Letnik: 2005. Lastna teža: 11.760 kg. Nosilnost: 27.240 kg. Dovoljena skupna masa: 38.999 kg. = Podatki o podjetju = Za več informacij:

Stanje: rabljeno, skupna masa: 38.000 kg, prva registracija: 01/2005, dolžina tovornega prostora: 21.000 mm,

Stanje: rabljeno, skupna masa: 44.000 kg, konfiguracija osi: 2 osi, prva registracija: 04/2018, Unladen weight: 11,800 kg Width: 12,000 mm Extendable forward for front loading of coupled flatbed deck Dkedpfx Ajy U Df Hsqqjr - Gooseneck in compact design - L x W: 3,900 x 2,480 mm - Interchangeable 2" king pin - Integrated hydromechanical steering - Hydraulic lifting and lowering function, incl. support cylinders - Rated for a technical fifth wheel load up to 24t - 4-sided aluminium drop sides - Steering radius: 2,200 mm Flatbed Deck - Lowbed with external tubes - Flatbed length: 6,750 mm, extendable by 5,500 mm to a total of 12,250 mm - Flatbed width: 2,550 mm - Construction height: 200 mm - Loaded deck height approx. 300 mm with 100 mm ground clearance, or approx. 350 mm with 150 mm ground clearance - Front coupling claws for connection to gooseneck 2-Axle Chassis - Chassis in compact design - Air-suspended chassis (L x W approx. 2,750 x 2,550 mm) incl. lift/lower valve, with 2 forced-steered axles, BPW make, wheelbase 1,330 mm - Chassis with wheel well Brake System - Dual-line full-wheel pneumatic brake system - Progressive central lubrication system - Radio remote control - Coupled height when loaded: 1,250 mm - Both axles with hydraulic forced steering

Stanje: rabljeno, lastna masa: 9.600 kg, največja dovoljena obremenitev: 30.400 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2011, dolžina tovornega prostora: 13.200 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 800 mm, vzmetenje: zrak, velikost pnevmatike: 205/65R17.5, barva: zelen, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, 4 axles, SAF axles, air suspension, lifting and lowering function, 3rd and 4th axles steered, ABS (anti-lock braking system), extendable, lashing rings, attachable loading ramps, front support, rear support, side aluminium underrun protection, storage box. Dkjdpfjxxkqzjx Aqqjr Body: 4-axle low-bed semi-trailer with attachable loading ramps, SAF axles, 3rd and 4th axles steered, 13 pairs of lashing rings, 10 pairs provisions for insertable stanchions, 13,200 mm loading length fully retracted, 16,800 mm loading length fully extended, 800 mm load height in the low-bed area, low-bed length retracted approx. 9,500 mm, TÜV inspection due, aluminium ramps available at an extra charge of EUR 1,500. ACCESSORY INFORMATION WITHOUT WARRANTY, subject to change, prior sale and errors excepted.

Stanje: rabljeno, lastna masa: 14.100 kg, največja dovoljena obremenitev: 33.900 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/1999, vzmetenje: zrak, velikost pnevmatike: 235/75 17,5, stanje pnevmatik: 50 odstotek, barva: zelen, Leto izdelave: 1999, velikost sprednje pnevmatike: 235/75 17,5, velikost zadnje pnevmatike: 235/75 17,5, voznikova kabina: dnevna kabina, emisijski razred: noben, Oprema: registracija tovornjaka, Reference number for inquiries: 68574 Faymonville, Platform trailer * Year of manufacture: 1999 * Air suspension * Steering axle * Forced steering axle * Air supply coupling heads (red + yellow) * Connection plug: 2x 7-pin * Lifting and lowering device * Telescopic – extendable semi-trailer * Suspension: air * Gross vehicle weight: 48,000 kg * Unladen weight: 14,100 kg * Payload: 33,900 kg * Permissible total weight: 48,000 kg * Axle manufacturer: SAF * Tire condition 1st axle: 50% -- 50% - Tire size: 235/75 R17.5 * Tire condition 2nd axle: 50% -- 50% - Tire size: 235/75 R17.5 * Tire condition 3rd axle: 50% -- 50% - Tire size: 235/75 R17.5 * Tire sizes: 235/75 R17.5 * Superstructure manufacturer: ES-GE * Extension defective * Steering axles inoperative * Mobile/rollable Liability disclaimer: Subject to alterations, prior sale, and errors excepted. Find more photos and videos on our homepage. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast, uncomplicated financing solutions Dkodpfx Ajyib Ahsqqer * Handling of all (export) documentation * Ordering export or customs license plates * Vehicle preparation: new tarpaulins, signage, painting, etc. * Professional loading and load securing * TÜV inspections and registration service * Transport of commercial vehicles Please contact our trained specialist staff—we are happy to assist you.

Stanje: novo, največja dovoljena obremenitev: 25.300 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete range of vehicles, including those available for immediate and short-term delivery, can be found on our website. Excerpt from the equipment specification. Full specification available upon request. Gooseneck * Gooseneck in SNT design to optimize loading area length * Length approx. 3,750 mm, hydraulically lift-/lowerable, as well as detachable * Technical fifth-wheel load: 25,000 kg For tractors: 4 x 2 and 6 x 2 Kessel bridge * Low bed designed as telescopic Kessel bridge SUPER LOW design * Length approx. 6,850 mm * with mechanical locking * Supply lines are routed protectively within the telescopic beams and automatically adjust to the respective low bed length Rear chassis * Short version with closed outer frame and tread plate cover * Chassis with excavator recess, closed in the rear half to accommodate air tanks Axles * BPW axles and suspension, all axles hydro-mechanically forced-steered * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve Tyres * GOODYEAR KMAX T 3PMSF (M+S) 245/70 R 17.5 twinned. Load index 143/141J (146/146F) Brake system * WABCO brand, EBS-E according to EU regulations, WITHOUT connection cable to tractor unit Paintwork * 6-coat final treatment * Complete steel construction shot-blasted after welding * 1 layer of zinc-based primer * 1 layer of adhesion primer. Final coating with 2 layers of 2K (acrylic) paint, single colour, then cavity sealing with special wax Djdpfev Sw E Ajx Aqqskr Trailer colour * RAL 3002 Carmine red * Rim colour: silver-grey * Side wall colour: Aluminium-natural Accessories included * Steel front wall, plug-in, approx. 400 mm high * 3 kW electro-hydraulic pump unit for hydraulic operation, except for hydraulic winches. Without installation of supply connectors at the tractor unit * Mounting adapter for 1 spare wheel in front of the gooseneck front wall * Outer beams of the gooseneck with mounting holes for screwable lashing rings. The first hole approx. 200 mm from the front, then approx. every 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each left and right on the rear chamfer of the gooseneck (LC 6,000 daN) * 2 inch kingpin * Hydraulic traverse for supporting the gooseneck on the tractor or a dolly * Air connection with air pistol on the gooseneck * 1 pair of steel ramps with climbing cleats and retaining bolts to bridge the low bed attachment hooks * 1 lashing ring each left and right on the front cross member (LC 10,000 daN) * At the outer beams of the loading area, prepared for removable loading floor * Lashing rings with retaining spring approx. every 1,200 - 1,300 mm on the inside outer beams of the loading area * Lashing rings with retaining spring approx. every 1,200 - 1,300 mm on the outermost beams of the loading area (LC 10,000 daN) * Cut-outs over the lashing rings on the upper flange of the outer beams * Mechanical pin-lug coupling from the low bed to the running gear, for changing the loading area or installing extension beams. With electro-pneumatic-hydraulic couplings * Outer beams of the low bed with painted-on sand layer for anti-slip protection * 2nd driving height for upper drive position, max. ± 50 mm from the normal driving position, without installation of controls from the tractor unit * 1 pair of lashing rings with retaining spring at the transition from low bed to excavator recess (LC 10,000 daN) * Front and rear chamfered edge