Semi Trailer 26 Fgm 2-Achs Tieflader nakup rabljenega (57.542)

Stanje: rabljeno, največja dovoljena obremenitev: 19.080 kg, skupna masa: 28.480 kg, konfiguracija osi: 2 osi, prva registracija: 08/2025, naslednji pregled (TÜV): 08/2026, POZOR: upravljati samo s kipo hidravliko! BPW 10t osi, 2 krmiljeni osi, POZOR: upravljati samo s kipo hidravliko! Višina sedla 1,25 m, POZOR: upravljati samo s kipo hidravliko! Višina sedla 1,25 m, hidravlično 1400x700 + ročno 700, Fpjdpfxsykgkco Abvsi

Stanje: novo, lastna masa: 9.300 kg, največja dovoljena obremenitev: 30.100 kg, skupna masa: 39.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17.5, Oprema: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm hardwood flooring Extendable loading platform: - Loading platform, extendable execution with rear bevel approx. 1,000 mm x 8° - 5 pairs of folding external lashing rings (LC 5,000 daN) - 3 pairs of folding external lashing rings (LC 10,000 daN) - 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) - Cutouts in the outer frame of the platform for attaching tie-down straps (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering Fpjdsyxc Eyepfx Abvji Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and tyres: - BPW axles, hydro-mechanically forced steering - Technical axle load: 12,000 kg - Air suspension with raise/lower valve - Axle tool kit - TPMS tyre pressure monitoring system according to ECE R 141 - Tyres: 235/75 R17.5 3PMSF Accessories included: - 2" kingpin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection strip - 2 wheel chocks with holder on the front wall - One spare wheel with holder in front of the front wall - Electro-hydraulic unit - Rear axle steering, operable from front and rear via cable remote control with push buttons, with axle single-track monitoring - European reflective warning plates (red-yellow) at the rear of the trailer - White reflective tape according to EU regulations on the sides and on the extension, red at the rear - Gooseneck and rear left and right brackets for warning signs, including socket - Sliding hook-in bar for ALU loading ramps at the rear of the vehicle - One bracket for a rotating beacon at the rear of the trailer - Galvanized folding supports under the rear bevel of the loading platform - One mudguard at the rear of the trailer - Operating manual and documentation on USB stick - Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 and removable pump protection cover - Removable ALU side boards and tailgate on the gooseneck approx. 2,440 x 400 mm - The rear galvanized stanchions are removable (body length approx. 2,560 mm) - 3 pairs of WADER container pockets in the loading platform for 1x 20ft, 1x 30ft or 1x 40ft container - 6 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform - One INOX toolbox 1,500 x 390 x 810 mm under the loading platform, right side in direction of travel - Four warning signs, extendable by approx. 400 mm, approx. 423 x 423 mm with a position light - On the warning signs a bracket for a rotating beacon - Radio remote control for rear axle steering, in addition to cable remote control, with indicator lights on receiver for single-track monitoring - On the checker plate surfaces on the gooseneck and loading platform, a painted sand layer as anti-slip protection - Speed sticker 80 km/h at the rear and on both sides - Axle load gauge for determining axle loads, including load diagram

Stanje: rabljeno, lastna masa: 1.920 kg, največja dovoljena obremenitev: 5.580 kg, skupna masa: 7.500 kg, prva registracija: 07/2004, naslednji pregled (TÜV): 12/2026, dolžina tovornega prostora: 4.045 mm, širina tovornega prostora: 2.001 mm, prostornina tovornega prostora: 5 m³, vzmetenje: drugo, velikost pnevmatike: 215/75 R17.5, barva: siv, vrsta prenosa: drugo, velikost sprednje pnevmatike: 215/75 R17.5, velikost zadnje pnevmatike: 215/75 R17.5, voznikova kabina: drugo, emisijski razred: noben, Oprema: meglenke, osvetlitev, registracija tovornjaka, zavorni sistem na stisnjen zrak, šasija, Blomenroehr 2-osni tandem nizkonosilni priklopnik * NOVO DNO, različni NOVI DELI!!! * 2x rampe, nastavljive po širini / PRUŽNO OBREMENJENE * Širina rampe: 0,57 m Fedjzfp N Nepfx Abvspi * Dolžina rampe: 2,20 m * BPW osi * nastavljiva vlečna gred * pnevmatike: 215/75 R17.5 * razmik med osmi: 0,99 m * podporne noge pri rampah * 4x sidrne zanke * nakladalni rob: 0,65 m * Teže: GVW- 7.500 kg, CW- 1.920 kg, nosilnost- 5.580 kg * Notranje mere: D- 4,045 m, Š- 2,00 m * nemško vozilo z nemškimi dokumenti!! * 3. lastnik * Prva registracija: 05.07.2004 * Tehnični pregled do 12/2026 * VIN: W095532084EB34190 Vmesna prodaja, napake in spremembe pridržane! Na slikah so bili delno odstranjeni logotipi podjetja - prosim povprašajte! Delovanje dodatne opreme brez garancije! Vaš kontakt: Marcel Schwämmle Tel. + WhatsApp:

Stanje: rabljeno, največja dovoljena obremenitev: 16.300 kg, skupna masa: 22.000 kg, konfiguracija osi: 1 os, prva registracija: 08/2022, naslednji pregled (TÜV): 09/2026, BPW 10t axles, frame construction made of high-strength Domex 700, total loading area 11,800 mm, loading platform length 8,350 mm, Knorr brake EBS 4s/2k (ASR), rear support legs foldable 25,000 kg, pneumatic valve for adjustment of 4 wheel blockers, electric winch with remote control, 3x2 lashing rings in the outer platform frame (8t), aluminium frame L: 2,300 mm - W: 500 mm, hot-dip galvanized, toolbox, rollers on the loading platform, extendable bumper, ramp holder. Fodsih E Hyopfx Abvjpi

Stanje: novo, največja dovoljena obremenitev: 98.290 kg, skupna masa: 126.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, You can find our entire range of vehicles that are immediately and soon available on our website. Extract from the equipment list. Full equipment details available on request. Gooseneck: * MAX810-neck-V-30-2.70-2{DSR 2 700/ASH 1300->1400} * Gooseneck hydraulically liftable/lowerable as well as removable. Length approx. 3,650 mm * Truck hydraulic connection with flow controller (20 l/min), * incl. gallows for suspension of supply lines, tractor unit (SZM) tank must hold at least 80 l, with MAX Trailer coupling pieces; otherwise, coupling pieces to be provided by the customer ex works. * For tractor units: 6 x 4 or 8 x 4 Loading Platform MAX810-6-A-11.00-17.5-1.50-2.75-PA-X * 6-axle extendable loading platform with pin-lug coupling at the front and approx. 500 mm x 8° chamfer at the rear. * Length: approx. 11,000 mm * Technically extendable by: approx. 7,700 mm * Axle spacing: approx. 1,500 mm * Hydraulic coupling bolt. Pendulum axle 2-axle front running gear, pendulum axle * All axles are hydromechanically forced steered. * MAX810-chassis-PA-X-F-2-17.5-1.50-2.75 pin-lug coupling front and rear. * Length: approx. 2,970 mm, chassis width: approx. 2,750 mm * BEKA-MAX central lubrication for a 2-axle running gear with standard grease NLGI-2 * Extendable widenings of approx. 230 mm per side for a 2-axle running gear. (± 27 kg) PENDULUM AXLE 6-AXLE LOADING PLATFORM, PENDULUM AXLE * All axles hydromechanically forced steered. * Hose burst valve on the axle compensation cylinder with automatic reset function. * Hydraulic cylinders with shut-off valves and pre-pin for securing in raised position. * Technical axle load: 13,740 kg each (30 km/h) Fpsdpfx Abozbfuhevji * Hydraulic axle compensation. TYRES * 24 x manufacturer of our choice (M+S) 245/70 R17.5 * Load index 143/141L (146/146F) * TPMS: TPMS tyre pressure monitoring system in accordance with ECE R 141. Final coating of the axles * Painted with two coats of single-colour 2-component paint in DB7350 nova grey. * PAINTING Complete steel structure automatically blasted with shot blasting system after welding. * Second blast processing with corundum for optimal adhesion of the coating system. * HRM-metallisation of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure the best corrosion protection. * PAINTING Trailer carmine red (RAL 3002) Including the following accessories * Gallows with winch for spare wheel at the front of the gooseneck. * 3.5 inch king pin * Steel front wall approx. 400 mm high. * Plug-in ALU side boards and rear wall on the gooseneck, approx. 400 mm high, anodized version. * Control lever on the gooseneck protected by a foldable cover. * Lighting of the controls on the gooseneck with on/off switch. * One 7-pin socket left and right rear on the gooseneck for the warning sign. * Load gauge on the gooseneck for axle load determination on the running gear at front and rear * BEKA-MAX central lubrication for a gooseneck with standard grease NLGI-2. * Hydraulic connections from the gooseneck to the low bed with screw couplings. * Access possibility on the gooseneck. * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery. Output: 9.5 kW (12.9 HP) at 3000 rpm, emission level: EU Stage V, max. hydraulic pressure: 280 bar, max. flow: 21 l/min, installation on the gooseneck. * Hydraulic oil tank 100 L, frame hot-dip galvanized (± 480 kg) * Hydraulic connection lines between powerpack and plug-in plate on the gooseneck. * Radio remote contr

Stanje: rabljeno, največja dovoljena obremenitev: 34.440 kg, skupna masa: 46.500 kg, konfiguracija osi: 3 osi, prva registracija: 06/1999, dolžina tovornega prostora: 13.550 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 950 mm, skupna širina: 2.550 mm, Skupna masa: 46.500 kg Lastna masa: 12.060 kg Nosilnost: 34.440 kg Skupna dolžina: 13.550 mm - 26.550 mm Širina: 2.550 mm Dodatne informacije - 3 osi hidravlično prisilno vodene - Klin za preusmeritev nad sedlom - Vpenjalna letev za rampe - Vstavni koli na nakladalni površini - Dvojno teleskopsko raztegljiv do 26.550 mm - Orodni kovček na labodjem vratu - E-kolo Fsdjycpbnopfx Abvopi - priprava za eln - hidravlična funkcija sledenja z električnim daljinskim upravljanjem - velik paket za pritrditev - lastna hidravlična črpalna enota Na voljo tudi novi in rabljeni polpriklopniki nizkopodnežnega tipa. Več informacij na

Stanje: rabljeno, največja dovoljena obremenitev: 84.000 kg, skupna masa: 105.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2000, Oprema: ABS, Vehicle Identification Number: ZCAS64M23Y0012202 HYDRAULIC SUSPENSION - Permissible total weight: 105,000 kg Fifth wheel load: 27,000 kg - Axle loads: 6 x 13,000 kg Unladen weight: 21,000 kg RO HU due Gooseneck: 3,900 mm Saddle height: 1,350 - 1,450 mm Low bed: Length: 13,550 mm (600 mm of which tapered) -- Width: 3,000 mm -- Loading height: 920 mm Fedpfex Txllsx Abvspi TELESCOPIC (with sliding table - 500 mm) Insertable rails Axle loads technical: 6 x 13,000 kg ROR axles with drum brakes Axle 1 = LIFTABLE Axles 2, 3, 4, 5, 6 = FORCED STEERED Tyres: 9.5 R 17.5 We expressly reserve the right to make changes, prior sale, and errors. The description serves general vehicle identification and does not constitute a warranty in the legal sense of sale of goods. The details in the purchase agreement are binding. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we would be pleased to provide a quote from our partner workshops! The vehicle may be labelled and/or branded for advertising purposes. Our general delivery and payment terms apply.

Stanje: rabljeno, največja dovoljena obremenitev: 30.380 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2011, Oprema: ABS, Vehicle Identification No.: VAVX99448BH301318 Including ALU ramps – 2,800 mm long, 400 mm wide Unladen weight: 9,620 kg German MOT due Fpjdpfx Ajtt U D Dobvsi Gooseneck: 4,000 mm Low-bed: Length: 8,620 mm Width: 2,550 mm Loading height: 930 mm Removable rails Support legs Width extension lighting Max. fifth wheel load at front: 12,000 kg Swing clearance radius: front 2,100 mm - rear 1,900 mm Axle loads (technical): 4 x 7,000 kg BPW Eco Plus axles with drum brakes Axle 1 = liftable Axles 3 + 4 = trailing steered 2 x toolboxes Tyres: 245/70 R 17.5 Changes, prior sale and errors excepted. The description serves for general identification of the vehicle and does not constitute a warranty in the legal sense of sales law. The description in the purchase contract is binding. Our offer is generally without new technical inspection (TÜV). If a new TÜV inspection is required, we are happy to provide an offer from our partner workshops! The vehicle may be covered with advertising stickers and/or inscriptions. Our general terms and conditions of delivery and payment apply.

Stanje: rabljeno, skupna masa: 58.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2007, Oprema: ABS, Vehicle Identification Number: XL942N5SA7L007207 Fifth-Wheel Load: 18,000 kg – Axle Loads: 4 x 10,000 kg Unladen Weight: 11,020 kg German MOT (HU) due Neck Length: 4,100 mm Coupling Height: 1,250 – 1,400 mm = Fifth-Wheel King Pin 3.5 inches Lowbed: Length: 9,400 mm, including 500 mm sliding table (600 mm of which is tapered) – Width: 2,525 mm – Loading Height: 880 mm TELESCOPIC EXTENSION by 6,300 mm EXTENDABLE WIDTH up to 3,000 mm Removable Rails Technical Axle Loads: 4 x 10,000 kg SAF Axles with Drum Brakes Axle 3,4 = SELF-STEERING AXLES Fpjdpfx Asy T Aq Eebvei Large Tool Box on the Gooseneck Central Lubrication System Tires: 245/70 R 17.5 Modifications, sale prior to conclusion of purchase, and errors are expressly reserved. The above description is provided for general identification purposes only and does not constitute a warranty under the law of sale. The description in the purchase contract is decisive. Our offer does not generally include a new TÜV (MOT) inspection. If a new inspection is required, we are happy to provide a quote from one of our partner workshops! The vehicle may be stickered and/or lettered with advertising. Our general terms and conditions of delivery and payment apply.

Stanje: rabljeno, največja dovoljena obremenitev: 34.030 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2025, naslednji pregled (TÜV): 07/2026, skupna širina: 2.480 mm, Oprema: ABS, Our complete inventory of immediately and short-term available vehicles can be found on our website. Excerpt from the equipment list. Complete configuration upon request. Gooseneck: * Gooseneck with rear bevel, approx. 750 mm x 10°, 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approx. 30 mm thick loading area; loading area behind the gooseneck hydraulically raisable and lowerable, length approx. 2,800 mm, with rear bevel approx. 1,000 mm x 8° * 6 pairs of fold-out lashing rings (LC 5,000 daN) * 2 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of inward folding lashing rings on the front central beam (LC 10,000 daN) * Grating floor C40/4 (point load approx. 2.3 t on an area of ca. 20 x 20 cm) over axles with checker plate covering Two-piece steel ramps: * One pair of galvanized, two-piece reinforced steel ramps, approx. 3,185 + 1,420 x 1,250 mm, with grating floor C40/5 (point load approx. 8 t on an area of ca. 20 x 20 cm) * Ramp with hydraulically folding and retractable ramp sections and hydraulic lifting device, max. load per pair: 40,000 kg * In accordance with regulation 1230/2012/EU, ramps shorter than 300 mm do not count towards the vehicle length of 16,500 mm in driving position Landing gear: * JOST landing gear (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) * Tires 235/75 R 17.5 3PMSF * TPMS tire pressure monitoring system according to ECE R 141 Axles: * BPW axles and suspension * 2 fixed axles, 1 self-steering trailing axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock activated via reverse gear and manually * Air suspension with lift and lower valve Braking system: * WABCO braking system in accordance with EU regulations, with EBS-E (2S2M) Colours: * Semi-trailer RAL 3002 carmine red * Rims silver * Tarpaulin in RAL 9006 silver Fpjdpjy Nu Hkjfx Abvoi Incl. accessories: * 1 spare wheel holder under the load bed, right hand side * 2-inch kingpin * Galvanized steel front wall * Yellow-red air couplings at the front galvanized connection rail * 4 wheel chocks with holder at the front wall * 3 heights of wooden planks * Galvanized folding supports under the loading area bevel * Height-adjustable tarpaulin body, approx. 3,960 mm * Galvanized front wall with a tensioning system for sliding curtains * Roof by EDSCHA, height-adjustable by approx. 400 mm, forward slidable on aluminum roof rail profiles (bolted to front and rear wall) * 3 pairs of movable stakes/restraining pillars in the load bed * Structure at the rear can be hydraulically widened to the left and right by approx. 750 mm * Sliding tarpaulin with approx. 700 mm reserve in length, with tensioning straps spaced at approx. 600 mm height * Upper edge of the body approx. 3,960 mm (loaded) * Driving with open sliding roof is not permitted and will damage the tarpaulin * Non-slip sand coating painted on checker plate sheets on the gooseneck and load bed * Cover plates to bridge the gap between the ramps and loading area * Electro-hydraulic unit mounted at the rear under the load bed * Mounting brackets for warning signs on both sides of the gooseneck and ramps, including socket * Control valves for the ramps on the right side of the semi-trailer * Grating floor C30/3 in the bevelled area of the gooseneck (point load approx. 2 t on a 20 x 20 cm area) * Grating floor in the bevelled area of the loading a...

Stanje: novo, največja dovoljena obremenitev: 39.720 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete range of vehicles, including immediately and short-term available units, can be found on our website. Excerpt from the equipment list. Full specification available on request. Gooseneck * With beveled front corners, approx. 45°, and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area * Extendable loading area version * 5 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of lashing rings laid flat at the front of the loading area (LC 10,000 daN) * Cut-outs in the outer frame of the loading area for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate covering above the axles Landing legs * JOST (mechanical) with two-speed gearbox, lifting capacity approx. 24 t (test load approx. 50 t) Axles * BPW axles, two fixed, two self-steering, with drum brakes * Air suspension with raise/lower function * Self-steering axle with electromagnetic reverse lock, activated by reverse gear or manually * Tyres: 205/65 R 17.5 Braking system * Wabco braking system meeting EU regulations with EBS-E (4S3M), without interconnection lines to the tractor unit Steel Construction * Made from high-tensile fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Paintwork * First-class, long-lasting corrosion protection for the standard shot-blasted welded frame, ensured by a two-component (2K) zinc dust primer Fpedpfx Asu Sd U Uebvsi * High-grade, single-color two-component (2K) topcoat in RAL 3002 Carmine Red * Rear section metallized and finished in RAL 9010 (Pure White) * Wheels in silver Accessories included * 2-inch kingpin * Galvanized steel front wall, approx. 400 mm high * Spare wheel holder in front of the front wall * Yellow-red air couplings on galvanized front connection rail * 4 wheel chocks with holder on the front wall * Rear section of the gooseneck with mounting for aluminium ramps * Galvanized folding supports under the rear bevel of the loading area * Bracket for a beacon on the trailer’s rear * Yellow reflective tape on the sides, extension, and rear, in compliance with EU regulations * Holders for warning signs with socket on left and right of gooseneck and rear panel * TPMS tire pressure monitoring system according to ECE R 141. Data transfer to the towing vehicle is via the standardized EBS interface per ISO 11992; for correct display the towing vehicle must be able to receive and display the data * On the gooseneck: clip-on aluminium side and rear panels, approx. 2,440 x 400 mm (L x H); rear galvanized stakes are removable (body length approx. 2,560 mm) * One galvanized toolbox integrated into the beveled gooseneck * 6 pairs of WADER container pockets in loading area, for 1 x 20' container, 2 x 20' containers, or 1 x 40' container * Sliding brackets for aluminium ramps at the vehicle’s rear * 7 pairs of stake pockets for removable stakes, approx. 100 x 50 mm in the outer frame of the loading area * One galvanized transverse holder under the loading area * Galvanized, extendable outriggers for widening by approx. 230 mm per side * Lift axle on the front axle controlled by TEBS E depending on current axle load and loading condition * 5 pairs of recessed lashing rings along the central beam (LC 5,000 daN)

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 11.000 kg, največja dovoljena obremenitev: 20.000 kg, skupna masa: 31.000 kg, konfiguracija osi: 2 osi, vzmetenje: zrak, Leto izdelave: 2016, Polpriklopnik z nizkim podom CAMRO CN 26.20B / Tiefbett / Dolžina 16 m Letnik 2016 Tehnični podatki Dovoljena skupna masa 31.000 kg Teža 11.000 kg Nosilnost 20.000 kg Dolžina glavne površine 665 cm Podaljšljiv za 405 cm Dolžina zadnje ploščadi 250 cm Dolžina sprednje ploščadi 305 cm Širina 110 cm Prikolica se razširi za 70 cm na vsako stran. Zračno vzmetenje Nosilec za rezervno kolo Fsdpfx Abjzf Ergjvepi 2 osi Zelo dobro stanje, popolna dokumentacija.

Stanje: rabljeno, lastna masa: 29.600 kg, največja dovoljena obremenitev: 72.400 kg, skupna masa: 102.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2025, dolžina tovornega prostora: 6.650 mm, širina tovornega prostora: 2.840 mm, višina nakladalnega prostora: 550 mm, velikost pnevmatike: 285/70 R19.5, barva: siv, Leto izdelave: 2025, Oprema: ABS, Gooseneck: - Gooseneck hydraulically liftable/lowerable and detachable - Length approx. 3,650 mm - For tractor units: 6 x 4 or 8 x 4 2-axle front running gear: - Hook attachment front and rear - Frame length x frame width approx. 2,200 mm x 2,850 mm Excavator deck “BB-A”: - Telescopic excavator deck “BB-A” with drive-over bridge hooks at the front and bolt-lug coupling at the rear - Length x base width approx. 6,650 mm x 2,850 mm - Beam height x beam width approx. 400 mm x 1,350 mm - Loading height 550 mm with 150 mm ground clearance Fjdpfxezauvro Abvjpi 4-axle rear running gear: - Mechanical bolt-lug coupling at the front for mounting a lowbed, end cross-member at the rear - Frame length x frame width approx. 5,480 mm x 2,850 mm Pendulum axle and tires (front and rear running gear): - “PENDEL-AXLE”, all axles hydromechanically force-steered - Burst hose valve on the axle equalization cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and safety pins to secure in raised position - Axles top-coated with 2-layer 2-component paint, single-color MB 7350 Novagrau - Technical axle load: 12,000 kg - Hydraulic axle equalization - Tires 285/70 R19.5 Remote steering: - Remote steering from front and rear, operable by cable remote via push-buttons, with axle alignment monitoring - Socket for operating remote steering at gooseneck - Cable remote with push-buttons including axle alignment monitoring Accessories included: - Galvanized connection bar at the front with yellow-red air couplings - Steel front wall approx. 400 mm high - 4 chocks - 3.5" king pin - One 7-pin socket on left and right rear of gooseneck for warning board - Boom with winch for spare wheel at the front of the gooseneck - Truck hydraulic connection with flow controller (40 l/min), including boom for supply line suspension, tractor unit tank must have at least 80 liters capacity with couplings - Plug-in ALU drop sides and rear wall for gooseneck, approx. 400 mm high, anodized - Operating lever on gooseneck protected by a folding cover - Separate air connection with air gun on the gooseneck - BEKAMAX central lubrication system with standard grease NLGI-2, 1x at gooseneck, 1x at 2-axle running gear, and 1x at 4-axle running gear - Variomax tool kit - Multi-coupling hydraulic connectors at gooseneck and in the area of the lowbed hook attachment - 2 spare wheels - Front running gear with a separate air connection for air impact wrench - Folding extensions with steel floor plates, width adjustable from approx. 2,850 mm to 3,250 mm - Steel plates can be inserted into 2 positions to obtain a lowered loading deck - Steel plates with rubber surface approx. 12 mm thick - Threaded inserts (⌀ 40 mm) every approx. 500 mm outside on the top flange of the excavator deck’s outer tube for screw rings - 2 stainless steel toolboxes approx. 855 x 340 x 390 mm left + right on the gooseneck - Radio remote control for remote steering in addition to cable remote - 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery - Steel plates adjustable in width from 2,850 mm to 3,250 mm and insertable in 2 positions for a lowered loading deck - 4 pairs of steel plates with rubber surface approx. 12 mm thick - Maximum 3,500 mm extendable tube coverable, in 500 mm increments - Lowbed central beam provided with a painted-on sand layer as anti-slip protection - Extensive lashing points

Stanje: rabljeno, številka stroja/vozila: 207xxxx, Leto izdelave: 2007, Navedite referenčno številko na zahtevo: 22319 Specifikacije:• TÜV velja do 21.11.2026• Leto izdelave 2007• Pnevmatske gume (glejte slike)• Dolžina: pribl. 1.130 cm• Širina: pribl. 255 cm• Medosna razdalja: 131 / 131 cm• Lastna teža: pribl. 10.870 kg• Največja nosilnost: pribl. 35.130 kg• Orodjarna Opis:Maur kiper priklopnik iz leta 2007. Priklopnik je bil pregledan s TÜV v novembru, nato pa parkiran. Takoj dobavljivo. TÜV: Da Fedpfsygq Drjx Abvspi EU odobren do: 21.11.2026 Lastna teža: 10.870 kg Skupna teža: 46.000 kg Nosilnost: 35.130 kg Širina: 255 cm Dolžina: 1.130 cm Model: - odobren do 11.2026 = Več informacij = Za več informacij se obrnite na ATS Norway.

Stanje: novo, največja dovoljena obremenitev: 14.050 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 800 mm, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, PRASQ 18 Turntable Trailer with Drop Sides Chassis made from welded longitudinal beams and through-bolted cross members Spring center approx. 1300 mm Permissible total weight approx. 18,000 kg Coupling height (center) approx. 800 mm unladen Front overhang approx. 710 mm (measure from headboard to center of front axle) Rear overhang approx. 950 mm (center of axle to rear edge of headboard) Chassis length approx. 6000 – 8000 mm (headboard to headboard) Chassis width approx. 2480 mm (loading width), overall width approx. 2550 mm Ride height unladen approx. 1300 mm (top edge of floor) Outer frame height: Height approx. 125 mm, t = 4 mm with outer bevel and lashing holes every 200 mm, without lashing rings Forklift impact protection as flat bar left and right on the outer frame Drawbar: 18t rigid drawbar, brand at our discretion Distance from center of towing eye to front edge of headboard as per customer specification Towing eye ø 40 mm (50 mm optionally available) Axles: Branded make (SAF/BPW/JOST) 9t, 22.5" with large disc brakes, without lift and lower function (total lift approx. 200 mm) Brakes: EBS braking system by Knorr or Wabco Air connectors: red and yellow coupling heads Tire pressure monitoring Tires: Premium tires 385/65 R 22.5, brand at our discretion Wheel 11.75 x 22.5 Fodpfeg Dkx Nox Abvepi Body: Drop sides in anodized finish, height approx. 800 mm Rear drop side with two internal folding steps Front wall approx. 1200 mm high, with sheet metal cladding, bolted on Floor: 27 mm transverse phenolic plywood floor Certified for forklift axle load of 7.2t according to DIN EN 283 (9t optionally available) Lighting system: LED lighting system 15-pin plug Flashing SML Attachments: 180° half-shell mudguards Aluminum or plastic side underrun protection on both sides One plastic wheel chock with bracket Coating/Paintwork Vehicle: Chassis painted in RAL 9005 or Novagrau 7350 Other colors available at extra cost (only if powder color is available) KTL with zinc phosphating plus powder coating, highest corrosion protection Hot-dip galvanizing (optional) Price ex works Attention!!! Photos show special equipment Get expert advice and a free, non-binding quote. Leasing, financing, and hire purchase available! We can meet your specific requirements! Contact us – we will be happy to provide you with a quote. Subject to errors and prior sale.

Stanje: novo, lastna masa: 12.000 kg, največja dovoljena obremenitev: 54.000 kg, skupna masa: 66.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm hardwood flooring Extendable load area: - Extendable loading platform with rear bevel approx. 1,000 mm x 8° - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 3 pairs of fold-out lashing rings (LC 10,000 daN) - 1 pair of recessed lashing rings at the front of the platform (LC 10,000 daN) - Cut-outs in the outer frame for tensioning straps (LC 2,000 daN) - Hardwood floor approx. 48 mm thick, checker plate over the axles Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox, 24t lifting capacity (50t test load) Brake system: - WABCO brake system according to EU regulations with EBS-E (4S3M) Steel construction: Fodpsykpbksfx Abvspi - High-strength fine-grained steel chassis Axles and tires: - BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically forced-steered - Technical axle load: 12,000 kg - Air suspension with lifting and lowering valve - Axle tool kit - TPMS tire pressure monitoring system to ECE R 141 - Tires: 245/70 R 17.5 3PMSF Accessories included: - 2" kingpin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection bar - 4 wheel chocks with holders on the front wall - One spare wheel with holder in front of the front wall - Electro-hydraulic power unit - Forced steering, operated from front and rear using a cable remote control with push buttons, with single-track monitoring of axles - European reflective panels (red-yellow) on trailer rear - White reflective tape in accordance with EU regulations on sides and on extension, rear red - Mountings on gooseneck and rear left/right for warning signs, incl. socket - Galvanized extensions, pull-out approx. 230 mm per side - Mount for rotating beacon at rear of trailer - Galvanized folding supports under the rear slope of the loading area - Mudflap at the rear of the trailer - Manual and documentation on USB stick - BEKAMAX (Pico) centralized lubrication system with standard grease NLGI-2 and removable pump guard - Removable ALU side boards and rear board on gooseneck, approx. 2,440 x 400 mm - Rear removable, galvanized stanchions (superstructure length approx. 2,560 mm) - INOX toolbox 1,350x400x400 mm on gooseneck - Note: toolbox covers oil filler cap - 4 pairs of WADER container pockets in the loading area for 1x 20ft, 2x 20ft, 1x 40ft or 1x 45ft container - 7 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame - Sliding mounting bar for ALU loading ramps at the rear of the vehicle - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the sloping rear section - Lift axle on front axle with control via TEBS-E depending on current axle load and load condition - Four extendable warning boards, approx. 400 mm, size approx. 423 x 423 mm, each with position light - Mounting for rotating beacon on the warning boards - Radio remote control for forced steering, additionally to cable remote, with indicator lights on receiver for single-track monitoring - Checker plate surfaces on gooseneck and loading area with painted-on sand coating for slip resistance - 80 km/h speed stickers on rear and both sides - Load gauge for axle load measurement, incl. load diagram

Stanje: rabljeno, lastna masa: 5.070 kg, največja dovoljena obremenitev: 14.930 kg, skupna masa: 20.000 kg, konfiguracija osi: 2 osi, prva registracija: 03/2018, vzmetenje: zrak, velikost pnevmatike: 235/75R17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75R17,5, velikost zadnje pnevmatike: 235/75R17,5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Za prekucne zabojnike ali zabojnike za odlaganje, doplačilo za rampe: 1.000 € -- Pridržujemo si pravico do napak, tiskarskih napak in sprememb, slike so vzorčne -- Več podatkov na: !, Več podrobnosti: ! Fpsdpjzkir Uefx Abvsi

Stanje: novo, skupna masa: 20.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.200 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, z indikatorjem obremenitve osi, dolžina nakladalne površine 8.200 mm, nakladalna višina obremenjena pribl. 900 mm, 20 pritrdilnih ušes po 10 t, 14 žepov za kole v zunanjem okvirju, nakladalne rampe (pribl. 3.000 x 750 mm), plezalna letvica na zunanji strani pri rampi in zadnjem nagibu, rampe nastavljive po širini, vzmetni dvižnik za enodelne rampe, lesen pod debeline 70 mm, zabo za shranjevanje z verižnim ali napenjalnim trakom, označevalni trak v skladu s predpisi, parkirna zavora z vzmetnim akumulatorjem, vozilo popolnoma vroče pocinkano, vključno z indikatorji obremenitve osi; dodatki za doplačilo: opozorilne table + osvetlitev + rotacijska luč = cena: 800 €, razširitev na 3 m = cena: 1.100 €, hidravlične enodelne rampe 500 €, hidravlični pomik ramp? = cena: 1.000 €, izrez za izkopno roko = cena: 1.000 €. Na zalogi tudi z dolžino nakladalne površine 9,20 m. -- Pridržujemo si pravico do napak in sprememb, vzorčne slike -- Več podatkov na:!, More Details: ! Fpjdpfx Abjzkiqdovji

Stanje: novo, skupna masa: 20.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 8.800 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Loading platform total length approx. 8,800 mm, low bed approx. 6,600 mm long, loaded height approx. 890 mm, 24 lashing rings each rated at 10 t, 12 stake pockets in the outer frame, loading ramps (approx. 3,100 x 750 mm), climbing strip on the outside of the ramps and rear slope, loading ramps laterally adjustable, wooden floor 68 mm thick, storage box with lid for lashing chains or tie-down straps, contour marking according to regulations, revolving warning beacon, vehicle fully hot-dip galvanized, -- misprints, errors and subject to change, sample images --, more data at: !, more details: ! Fedpfszi Rvxox Abvopi

Stanje: novo, skupna masa: 20.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 8.800 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Total loading bed length approx. 8,800 mm, low bed approx. 6,600 mm long, loaded loading height approx. 890 mm, 24 lashing rings, each rated at 10 t, 12 stake pockets in the outer frame, loading ramps (approx. 3,100 x 750 mm), climbing strip on the outside of the ramps and rear incline, side-adjustable loading ramps, spring-assisted ramp lifters, 68 mm thick wooden floor, storage box with lid for lashing chains or tie-down straps, contour markings as per regulations, warning beacon, vehicle hot-dip galvanized by immersion process, -- errors, misprints and changes excepted, sample images --, More data at: !, More details: ! Fodpoziyihsfx Abvspi

Stanje: novo, največja dovoljena obremenitev: 46.800 kg, skupna masa: 58.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, Celoten naš izbor vozil, ki so na voljo takoj ali v kratkem času, najdete na naši spletni strani. Izpis iz opreme. Popolna oprema na zahtevo. "Gansje vrat": "Gansje vrat" s poševnimi robovi spredaj, približno 45° in z zadnjim poševnim robom približno 750 mm x 10°. 3 pari pritrdilnih obročev (LC 5.000 daN). Trda lesena obloga, debeline približno 30 mm. Nosilna plošča z izvlečno izvedbo: Nosilna plošča z izvlečno izvedbo in zadnjim poševnim robom, približno 1.000 mm x 8°. 5 parov pritrdilnih obročev, ki se lahko zložijo navzven (LC 5.000 daN). 3 pari pritrdilnih obročev, ki se lahko zložijo navzven (LC 10.000 daN). 1 par pritrdilnih obročev, nameščenih vodoravno spredaj na nosilni plošči (LC 10.000 daN). Vrez v zunanjem okvirju nosilne plošče za obešanje zateznih trakov (LC 2.000 daN). Trda lesena obloga, debeline približno 48 mm, nad osmi je nameščena profilirana jeklena plošča. Osi: Osi in vzmetenje BPW, 1. os je fiksna, vse ostale osi pa so hidravlično-mehansko sinhronizirane. Tehnična nosilnost osi: 12.000 kg na os. Zračno vzmetenje z ventilom za dvigovanje in spuščanje. Orodje za osi. Pnevmatike: Pnevmatike 245/70 R 17.5 3PMSF, indeks obremenitve (146/146 F) - znamka po naši izbiri. TPMS: Sistem za nadzor tlaka v pnevmatikah TPMS, v skladu z ECE R 141. Podporke za sedelno prikolico: Podporke za sedelno prikolico JOST (mehanske) z 2-stopenjskim menjalnikom za približno 24 t nosilnosti (približno 50 t testne obremenitve). Zavorna naprava: Zavorna naprava v skladu z uredbami EU, s sistemom EBS-E (4S3M). Fodpfx Abozk S Dmevepi Barvanje: Celotna jeklena konstrukcija je po varjenju avtomatsko obdelana z abrazivnim curkom. Drugi abrazivni postopek s korundom za optimalno oprijemljivost premaznega sistema. HRM-metalizacija celotnega podvozja vozila z ZINACOR 850 (85 % cink / 15 % aluminij) za zagotovitev najboljše protikorozijske zaščite. Končna barva z 2 slojema 2K-premaznega laka, enobarvna, v barvi RAL 3002 karmin rdeča, v skladu s sistemom RAL 841GL. Platišča v srebrno-sivi barvi. Zadnji del je metaliziran in pobarvan v barvi RAL 9010 (čista bela). Metalizirano barvanje ni mogoče. Test barvanja opravljen v testu s soljo v skladu z ISO 9227-NSS. Zapiranje votlin s posebnim voskom. Jeklena konstrukcija: Jeklena konstrukcija iz visoko trdnih finozrnatih jekel. Kakovosti jekel: S355J2+N/S355MC (meja tečenja 355 MPa), S690QL/S700MC (meja tečenja 690 MPa). Električna napeljava: Električna napeljava v skladu z uredbami EU, razsvetljava 24 Volt ASPÖCK-NORDIK (ASS3). Vse LED-stranske luči za označevanje utripajo sinhronizirano z smerniki. ASPÖCK-UNIBOX na priključnem profilu spredaj s vtičnicami 24N, 24S in 15-polna. Priključek v skladu z ISO. 24N ISO-1185, 24S ISO-3731, 15-polni ISO-12098. Vključno z naslednjo dodatno opremo: - 2-palčni kraljevi klin - Ena pocinkana jeklena sprednja stena, približno 400 mm visoka. - Elektro-hidravlična enota (± 45 kg) - Pomikanje sprednje in zadnje osi s kabelskim daljinskim upravljanjem preko pritiskovnih gumbov, z nadzorom ene osi (brez vgradnje v nadzorno enoto vozila). - 1 par potopljenih pritrdilnih obročev vzdolž centralnega nosilca zadaj, v poševnem robu (LC 10.000 daN) (± 3 kg). Na "gansjem vratu" so nameščene aluminijaste stranske plošče in zadnja stena, ki se lahko vstavijo, približno 2.440 x 400 mm (D x V). Zadnje pocinkane stranske plošče se lahko odstranijo. (Dolžina nadgradnje približno 2.560 mm) (± 46 kg). Ena orodjarna omara, pocinkana, integrirana v poševni obliki "gansjega vratu" (± 47 kg). 3 pari WADER-

Stanje: rabljeno, največja dovoljena obremenitev: 37.885 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2024, naslednji pregled (TÜV): 08/2026, Oprema: ABS, Izvleček opreme: – Tovorna površina v izvlečni izvedbi z zadnjo poševno stranjo, približno 1.000 mm x 8°. – Obloga iz trdega lesa, debeline približno 48 mm, nad osmijo obloga iz valjane pločevine. – JOST opore za sedlo (mehanske) z 2-stopenjsko prestavo za približno 24 t nosilnosti (približno 50 t preizkusne nosilnosti). – Osnova in vzmetenje BPW, 2 trdni osi, 1 os s krmiljenim zglobom, tehnična nosilnost osi: 12.000 kg na os. Fjdpfx Aszkx Ilsbvjpi – Zračno vzmetenje z ventilom za dvig in spuščanje. – Zavorna naprava v skladu s predpisi EU s sistemom EBS-E (2S2M). – 2-palčni kraljevi čep. – Ena pocinkana jeklena čelna stena, približno 400 mm visoka. – Manometer za merjenje obremenitve osi, vključno z diagramom obremenitve. – Na podaljšku (gosi) aluminijaste stranske stene in zadnja stena, vstavljive, približno 2.440 x 400 mm (D x V). – En pocinkan škatla za orodje, integrirana v poševni podaljšek (± 47 kg). – 3 pari WADER žepov za kontejnerje na tovorni površini za 20' (30') ali 40' kontejner. (± 30 kg). – 6 parov žepov za podpore za vstavljive podpore, približno 100 x 50 mm v zunanjem okvirju tovorne površine. (± 18 kg). – Razširitve, pocinkane, izvlečne za približno 230 mm na stran (± 230 kg). – Dvignjena os na prednji osi. – Pomikalne pritrdilne letve za aluminijaste nagibne rampe na zadnji strani vozila. – 2 LED-luči za vzvratno vožnjo, nameščene na zadnji plošči. – 2 para Ferry-obročev pod podaljškom in 2 para zadaj (± 16 kg). – Štirje opozorilni znaki, izvlečni za približno 400 mm, približno 423 x 423 mm, z LED-pozicijsko lučjo. (± 25 kg). – Na opozorilnih znakih nosilec za rotacijsko luč. – Ena rotacijska luč, dobavljena ločeno. – HRM-metalizacija (metalizacija z visoko odpornostjo). – Končni premaz, enobarven, v barvi RAL 3002, karmin rdeča.

Stanje: rabljeno, največja dovoljena obremenitev: 47.300 kg, skupna masa: 58.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2025, naslednji pregled (TÜV): 03/2026, Oprema: ABS, Izpisek iz opreme. Celotna oprema na zahtevo. * Vratna plošča s poševnimi robovi spredaj, približno 45° in s poševnim zadnjim delom, približno 750 mm x 10°. * 3 pari pritrdilnih obročev (LC 5.000 daN) * Trdna lesena obloga, debeline približno 30 mm. * Nosilna površina v izvlečni izvedbi s poševnim zadnjim delom, približno 1.000 mm x 8°. * 5 parov pritrdilnih obročev, zložljivih navzven (LC 5.000 daN) * 3 pari pritrdilnih obročev, zložljivih navzven (LC 10.000 daN) * 1 par pritrdilnih obročev, nameščenih vodoravno spredaj na nosilni površini (LC 10.000 daN) * Izrezi na zunanjem okvirju nosilne površine za pritrditev zategovalnih trakov (LC 2.000 daN) * Trdna lesena obloga, debeline približno 48 mm, nad osmi. * Rebrasta jeklena obloga. * Podporne noge sedelne prikolice JOST podpore (mehanske) z 2-stopenjsko prestavo za nosilnost 24 t (preskusna nosilnost 50 t) * Pnevmatike 235/75 R 17.5 3PMSF Fpjdpfx Abezkx Huovei * Osi BPW osi, dve fiksni osi, dve osi s sledilnim sistemom, z zračno vzmetjo, z bobnasto zavoro s funkcijo dviganja/spuščanja. Sledilne osi z elektromagnetno blokado za vožnjo v vzvratni smeri, ki se aktivira preko vzvratne prestave ali ročno. * Zavorna naprava WABCO zavorna naprava v skladu z direktivami EU, z EBS-E (4S3M) brez povezovalnih vodov do vlečne enote. * Lakiranje Kakovostno 2-komponentno (2K) lakiranje, enobarvno, v barvi RAL 3002, karminsko rdeča. * Dodatna oprema Nosilec za rezervno kolo pred sprednjo steno (brez rezervnega kolesa). 2-palčni kraljevi zatič. Pocinkana jeklena sprednja stena, približno 400 mm visoka. Na pocinkani priključni letev spredaj so nameščene rumeno-rdeče zračne spojke. 4 klini s pritrdilom na sprednji steni. Nosilec na zadnjem delu vratne plošče za aluminijaste dostavne rampe. Pocinkane zložljive podpore pod poševnim delom nosilne površine. Nosilec za okroglo luč na zadnjem delu prikolice. Rumena odsevna trak v skladu z direktivami EU, stransko, na izvlečnem delu in na zadnjem delu prikolice. Na vratni plošči in na zadnji plošči, na levi in desni strani, nosilci za opozorilne table, vključno z vtičnico. Merilnik obremenitve za ugotavljanje obremenitve osi, vključno z grafom obremenitve. * Vključno s posebno dodatno opremo Na vratni plošči so aluminijaste bočne stene in zadnja stena, ki se lahko pritrdijo, približno 2.440 x 400 mm (D x V). Galvaniziran orodjarni predal, integriran v poševno vratno ploščo. 3 pari WADER pritrdilnih vreč na nosilni površini za 20' (30') ali 40' kontejner. Drseče pritrdilne letev za aluminijaste dostavne rampe na zadnjem delu vozila. 6 parov pritrdilnih vreč za vstavne prečke, približno 100 x 50 mm, na zunanjem okvirju nosilne površine. Pocinkane razširitve, izvlečne, približno 230 mm na stran. Dvignjena os na sprednji osi z upravljanjem preko TEBS E. 2 LED vzvratni svetili, nameščeni na zadnji plošči. 2 para Ferry obročev pod vratno ploščo in 2 para zadaj. Akustični opozorilni signal pri vožnji v vzvratni smeri. HRM metalizacija (metalizacija z visoko odpornostjo).

Stanje: novo, konfiguracija osi: 2 osi, vzmetenje: zrak, velikost pnevmatike: 245/70-17,5, Oprema: ABS, - EBS - LED lighting - Alloy wheels - Air suspension - Spare wheel - Toolbox - Central lubrication - Additional steering axle PAVIC 2-axle low loader for forestry machinery Type: STLT2Z for harvester transport --- On order! Color freely selectable! Fifth wheel load: 18,000 kg Axle load: 24,000 kg (technical) Gross weight: 42,000 kg (technical) Unladen weight: 9,300 kg Made in Germany! Chassis as steel welded construction made from high-quality fine-grain steels Lashing eyes 130 kN, 5 per side Additional lashing eyes, 3 pairs on the raised bed Removable stanchion system made of galvanized steel with aluminum side panels (silver anodized) Steel front wall approx. 400 mm high Folding aluminum loading ramps, mechanically secured SKF central lubrication system with reservoir (brake light activated) with approx. 20 lubrication points Dimensions: Total length: 16,000 mm Bed length incl. rear section: 11,364 mm Fifth wheel height: 1,330 mm Ground clearance at driving height: 184 mm Fifth wheel distance: 600 mm R1 measurement from kingpin forward: 410 mm (swing radius) R2 measurement: from kingpin to frame: 2,150 mm (swing radius) More detailed dimensions available on request (technical drawing) Axles: 2 x 12,000 kg (technical) Gigant with drum brakes, including 8 x 245/70 R17.5 premium tires on Alcoa Dura-Bright rims Suspension: Pneumatic with lift and lower function Second ride height, + approx. 50 mm, can be activated from the cab. At 20 km/h, the vehicle lowers again. Including axle load gauge Coupling device: 2" kingpin (replaceable, single position) NO landing legs! -> Customers use a wide timber beam placed under the front frame. Braking system: Wabco EBS with axle load measurement (Smartboard) including odometer Parking brake: spring-loaded Fjdpfoyr Izxjx Abvspi Lighting system: Tail lights: 2 pairs (3-chamber lights) Side marker lights: LED Outline marker lights: LED Front and rear position lights: LED Reversing and auxiliary lights, each round License plate light: LED 1 x detachable rotating beacon, switchable from driver's cab via dedicated switch 4 x LED work lights 4 x oversize markers, double secured (clamp screw and pin) with red/white LED lighting Steering: Tridec HF-E (hydraulic forced steering on both axles) including automatic centering and straight-line adjustment Tridec remote control (radio remote control), also usable in wired mode Paintwork: Complete steel structure shot-blasted after welding and primed with special adhesion primer. Then, 2-pack finish in RAL color of choice. Axles and wheel hubs are black or optionally RAL painted at extra cost Other attachments are galvanized and/or painted/powder-coated or made of aluminum (with or without anodizing) Approval: Including §13 certificate Including §70 certificate (customer must provide a suitable and approved 3-axle tractor unit), includes e.g. circular driving test at TÜV Nord in Meppen. This is a non-binding offer. Subject to prior sale, errors, and changes. Axle configuration Tire size: 245/70-17.5...

Stanje: rabljeno, lastna masa: 10.100 kg, največja dovoljena obremenitev: 38.900 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2025, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, velikost pnevmatike: 245/70 R 17,5, barva: siv, Leto izdelave: 2025, Oprema: ABS, Za vsako rabljeno polpriklopno vozilo prejmete aktualno in popolno poročilo o pregledu ter delovanju. Podvozje: -Stabilna varjena jeklena konstrukcija okvirja z dvignjenim sprednjim delom in ravno nakladalno površino z zadnjim poševnim zaključkom približno 500x100 mm -Vrat okvirja višine 200 mm z zaobljenimi vogali -Poševni zaključek "grbine" (Schwanenhals) približno 500 x 100 mm (dvižni rebrasti profili na zunanjem okvirju za zadnjim poševnim delom) -2 mesti za king pin z zamenljivim 2'' king pinom -Zunanji okvir zaprt navzven z luknjami za privezovanje z napenjalnimi trakovi (pritrditev s verigami ni možna) -Ojačana izvedba okvirja / točkovna obremenitev v težišču -Priprava za izvlečne razširitve v nakladalni površini -Z bagrskim izrezom (brez pokrova), globina približno 220 mm, širina približno 600 mm, začne se za 2. osjo in poteka do zadka vozila -1 par blatniških izrezov pred osjo z jeklenimi pokrovi (pokrovi prevlečeni s premazi Körapur), globina približno 400 mm, ter še 1 par med 1. in 2. osjo z jeklenimi pokrovi -Zaščita pred podvozjem = podaljšana končna plošča -Podporne noge zadaj Rampi: -Dvodelne nakladalne rampe posebne izvedbe z mehanskim podaljšanjem -Dolžina približno 2.850 mm plus 1.850 mm, z hidravličnim dvigalom (samo v kombinaciji z elektrohidravličnim agregatom) -Širina približno 800 mm -Lesena površina -Vključene dvižne rebraste plošče na nakladalnih rampah -V transportnem položaju z možnostjo pritrditve z napenjalnimi trakovi -Upravljanje prek ročice, nameščene zadaj desno v smeri vožnje -Stransko hidravlično pomične Tla: -35 mm tla iz macesnovega lesa z aluminijastimi Omega profili Fpjdpfxozdzrts Abvsi Podporne dvigala: -Mehanske podporne dvigala 24 t s stranskim upravljanjem in izravnavo potiska Osovine, krmiljenje, pnevmatike: -BPW zračno vzmetene osi, vsaka 10 t dovoljene nosilnosti, premer zračnih mehov 360 mm -Zavore z Z-kamnom 300/200 mm, obloge brez azbesta -Avtomatski napenjalec zavornih palic -Dvigovanje in spuščanje s skupnim hodom približno 200 mm -2. položaj za vožnjo z dodatkom krogličnega ventila +50 mm -1. os dvižna os (preko EBS sistema), avtomatsko potrjevanje s mehanskim ročnim upravljanjem na priklopniku -3. os z obračalno osjo z električnim in mehanskim zaklepom -12 jeklenih platišč, 10 lukenj, z natančno namestitvijo na sredino -12 pnevmatik 245/70 R 17,5 143/141J, brez zračnic -Vključno s sistemom za nadzor tlaka v pnevmatikah Dodatna oprema: -Na grbi (Schwanenhals) snemljive bočne in zadnje stranice višine približno 400 mm -Nosilec za rezervno kolo -Bočna aluminijasta zaščita pred udarci -4 podložni zagozdi s pritrditvijo -Podaljšani nosilec za registrsko tablico na končni plošči -1 ECE tablica zadaj, snemljiva -11 parov ZK modulov 10 t ob strani: -2x na grbi -9x na nakladalni površini -Izvlečne opozorilne table, vključno s po 3 pozicijskimi lučmi, spredaj na podpornikih za prikolico in zadaj pred končno ploščo, brezstopenjsko izvlečne do nakladalne širine 4.500 mm -4 nosilci za opozorilne table, vstavljivi v žepe na nakladalni površini -6 parov bočnih žepov za stebre 100x50 mm -2 prečni žepi za stebre 100x50 mm na grbi (zunanjega okvirja do glavnega okvirja; 1x pred in 1x za položaj king pina) -3 prečni žepi za stebre 100x50 mm na nakladalni površini (1x spredaj, 1x pred 1. osjo, 1x za 3. osjo) -2 para jeklenih plošč na nakladalni površini za priklop kontejnerjev 1x 20ft -Gumijasta zavesa montirana na zaščito pred podvozjem