Faymonville Max Trailer 3-Achs-Tele-Semi-Nachlaufg. nakup rabljenega (54.303)

Stanje: novo, največja dovoljena obremenitev: 52.810 kg, skupna masa: 63.000 kg, konfiguracija osi: > 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete vehicle inventory, featuring vehicles available immediately or at short notice, can be found on our website. Excerpt from the equipment features. Full equipment details available upon request. Loading platform: * Platform with approx. 30 mm thick hardwood floor Bdedpfoxttc Aox Agtsh * 10 pairs of hinged external lashing rings (LC 10,000 daN) Landing legs: * Hydraulic landing legs TPMS: * TPMS tire pressure monitoring system in compliance with ECE R 141. Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992. For proper display, the tractor unit must be capable of transmitting and displaying this data. Axles and suspension: * BPW axles, technical load capacity 12,000 kg each, first axle rigid, all other axles hydro-mechanically force-steered, mounted on turntables * Air suspension with lift and lower valve * Axle tools Tires: * Tires 445/65 R 22.5 169 K Electrical system: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets * Connection according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Braking system: * Wabco braking system in accordance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor Steel construction: * Steel structure made of high-tensile fine-grained steels * Steel grades: S355J2+N/S355MC (Yield strength 355MPa), S690QL/S700MC (Yield strength 690MPa) Painting: * Entire steel structure automatically shot-blasted after welding using a blasting wheel system * Second blasting with corundum for optimal adhesion of the coating system * Final coating with 2 layers of two-component topcoat, single colour in RAL 1007 Daffodil Yellow, as per RAL 841GL system * Rear section metallized and painted in RAL 9010 (Pure White) * Rims Silver Grey * Paint system tested in salt spray test according to ISO 9227-NSS * All cavities sealed with special wax Including accessories: * Platform with approx. 30 mm thick hardwood floor * 2 inch kingpin * One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high * Yellow-red air couplings at the galvanized front connection strip * At the gooseneck and rear plate left and right one bracket each for warning signs including socket * Steering from front and rear via wired remote control with push buttons, with axle tracking control (without installation in the tractor unit) * Electro-hydraulic unit * 12 pairs of stake pockets for approx. 100 x 50 mm plug-in stakes on the outer frame of the platform * Load pressure gauge for axle load determination including load diagram * Lift axle on the front axle controlled by TEBS E * 5 pairs of stake pocket strips across the platform for approx. 100 x 50 mm plug-in stakes * One INOX toolbox 1,200 x 460 x 550 mm, mounted at the front left underneath the platform (in direction of travel) * 1 tow coupling with reinforcement bolted to the rear crossmember * BEKAMAX central lubrication system (Pico) with NLGI-2 standard grease and removable protection for the pump * 2 LED reversing lights mounted on the rear plate * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum)

Stanje: novo, največja dovoljena obremenitev: 25.645 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment list. Full equipment details available upon request. Loading Platform: - Low-bed with central beam in extendable design, length approx. 6,750 mm - 5 pairs of lashing rings, foldable outwards (LC 5,000 daN) - 1 pair of lashing rings, foldable outwards (LC 10,000 daN) - 1 pair of flush-mount lashing rings at the rear of the loading platform (LC 10,000 daN) Gooseneck: - Gooseneck hydraulically lift/lowerable and detachable Rear Running Gear: - Rear running gear in short version with closed outer frame and tread plate cover - Running gear with excavator trough, trough rear half enclosed for housing air tanks - 2 pairs of lashing rings, foldable outwards (LC 5,000 daN) - 1 pair of lashing rings, foldable outwards (LC 10,000 daN) - 1 pair of flush-mount lashing rings at the rear of the running gear (LC 10,000 daN) Axles: - BPW axles, hydromechanically forced steering - Air suspension with lifting and lowering valve Tyres: - Tyres 245/70 R 17.5 3PMSF - TPMS: tyre pressure monitoring system as per ECE R 141 Brake System: - Wabco braking system in compliance with EU regulations with EBS-E (2S2M) Paintwork: - High-quality 2-component (2K) top coat, single colour RAL 3000 flame red Includes the following additional equipment: - 2 king pins - One galvanised steel front wall, approx. 400 mm high - Remote steering adjustment from front and rear via cable remote control with pushbuttons, including single-track axle alignment (without installation in the tractor unit) - Electro-hydraulic unit Bodpfx Agoxf Silstjdh - Axle load gauge including axle load diagram - On the gooseneck, aluminium side boards and rear wall, plug-in type, approx. 2,440 x 400 mm (L x H). The rear galvanised plug-in stanchions are removable. (Upper body length approx. 2,560 mm) - Separate air connection with blow gun on the gooseneck - 2 work lights with switch on the trailer, mounted on left and right sides of the gooseneck platform - One INOX toolbox, approx. 1,350 x 400 x 400 mm, mounted on the gooseneck - 6 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the loading platform, 2 pairs in the rear frame of the running gear - Galvanised, extendable load width extensions approx. 230 mm per side - Hydraulic connections from the gooseneck to the low-bed with multi-coupling instead of screw couplings. No guarantee on seals. - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard grease NLGI-2 with removable pump protection - 2 pairs of WADER container pockets in the loading platform, for 1x 20’ container - One removable galvanised intermediate platform with 1 pair of WADER container pockets - 1 pair of steel ramps to bridge over the low-bed’s loading hooks - Loading platform with painted sand layer as anti-slip protection - HRM metallization (High Resistance Metallization)

Stanje: novo, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.730 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 2026, Oprema: ABS, PRSSQ 27 SYS Three-axle Curtainsider with Crosswise Laminated Timber Floor Curtainsider body height laterally: 2,650 mm (from loading platform to lower edge of outer beam) Chassis width approx. 2,480 mm Chassis length approx. 13,620 mm Ride height unladen approx. 1,250 mm at 1,130 mm fifth wheel height COC Chassis frame construction made of welded longitudinal beams and through-fitted cross members Outer frame height approx. 125 mm, 4 mm with groove for lashing rings & lashing holes on the outside 13 pairs of lashing rings (5t certificate) Axles: Manufacturer’s free choice (SAF/BPW) Axle 9t 22.5" with large disc brakes EBS brake system by Knorr or Wabco Tire pressure monitoring system Flashing side marker lights European brand tires 385/65 R 22.5 Body certificate DIN EN 12642 XL valid with two rows of timber slats Certificate for 9t forklift axle load (DIN EN 283) Certificate for 5t per lashing ring Bdedpfx Ajg Dkxzjgtsh Rear portal with 4 internal locking rods Door wings made of steel sandwich profiles Sliding roof with automatic locking, opens from rear 3 sets of side sliding curtains Front wall: steel, 400 mm steel cassette with inner wear plate approx. 2.4 m Lighting system: 24 Volt with LED multifunctional lights Anti-slip phenolic coated floor, 27 mm, crosswise installation Roof tarpaulin – reinforced 12x12 roof fabric Optional with tail lift Optional with internal sideboards Optional with FLEXSTRAP system Optional with pallet box, spare wheel, etc. Body painted in RAL colors as specified Chassis in RAL 9005 or MB 7350, other colors available at extra cost (subject to powder availability) KTL coating with zinc phosphating plus powder, highest corrosion protection Optional: hot-dip galvanized Price ex works Attention! Pictures show special equipment Get professional advice and a free, no-obligation quote. Leasing, financing, or hire purchase possible! We can cater to your individual requirements! Contact us – we are happy to prepare an offer for you. Errors and interim sale reserved!

Stanje: rabljeno, številka stroja/vozila: UH9LTLA24TCMS1046, konfiguracija osi: 3 osi, prva registracija: 02/2012, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 1.200 mm, Leto izdelave: 2012, = Dodatne možnosti in dodatna oprema = - Zračna vzmetenje na zadnji osi - Zračna vzmetenje na sprednji osi = Dodatne informacije = Teže Nosilnost: 24.000 kg Dovoljena skupna masa: 5.200 kg Bdsdozyvwpspfx Agteh Stanje Splošno stanje: povprečno Tehnično stanje: povprečno Vizualno stanje: povprečno Dodatne informacije Stanje pnevmatik na sprednji osi: 60 Stanje pnevmatik na zadnji osi: 60 Pnevmatike na sprednji osi: 265/70 R 19.5 Pnevmatike na zadnji osi: 265/70 R 19.5 Zadnji pregled: 31. 8. 2026 Dodatne informacije Za dodatne informacije se obrnite na Lastas Sales.

Stanje: novo, največja dovoljena obremenitev: 39.600 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, skupna višina: 860 mm, MAX Trailer Type 100 NEW | Extendable | 39t Payload | 3 Axles | from €66,900 New vehicle – individually configurable to suit your application. High payload capacity with rugged construction and maximum cost-efficiency. --- Highlights: • Approx. 39,600 kg payload • Loading platform 8,600 mm + 5,400 mm extendable • Ramp load capacity up to 40,000 kg • BPW axles with air suspension • WABCO EBS braking system --- Technical Data: • Gross vehicle weight: 49,500 kg • Unladen weight approx.: 9,866 kg • Loading height at max. load: approx. 860 mm • Overall width: 2,540 mm • Speed: 80 km/h --- Standard Equipment: • Extendable loading platform with durable hardwood floor • Galvanised steel ramps with hydraulic lifting mechanism • High-strength steel construction with long-lasting corrosion protection • LED lighting system • JOST landing legs with 2-speed gearbox • Tire Pressure Monitoring System (TPMS) --- Included Options: • Spare wheel with holder • Galvanised front wall (approx. 400 mm) • Electro-hydraulic power pack under loading platform • Extendable warning signs with LED • Reflective tape in accordance with EU regulations • Rotating beacon holder at rear • Ramp control valves on right side Additional equipment and individual adaptations available at any time – we configure your vehicle exactly according to your requirements. Sample photo. Equipment may vary depending on configuration. Bdsdpsypa Npsfx Agtsh

Stanje: rabljeno, skupna masa: 51.600 kg, konfiguracija osi: 3 osi, prva registracija: 05/2019, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.540 mm, skupna širina: 2.540 mm, skupna višina: 2.700 mm, Oprema: ABS, Številka identifikacije vozila: YAFSR3004K0022661 TELESKOPSKO podaljšanje do 8.200 mm Pripravljene tirnice za aluminijaste rampe, BREZ ramp Priprave za pritrditev kontejnerjev: 1 x 20", 2 x 20", 1 x 40", za kontejnerje dolžine 45" DE HU 01.2027 – naslednji pregled SAF osi s kolutnimi zavorami 3 x osi s prisilnim krmiljenjem, hidravlično-mehansko na vrtljivi platformi s kabelskim upravljanjem in radijskim daljinskim upravljanjem Samodejno usmerjanje DVIŽNA OS Bdjdozlvtnspfx Agtoh Mere platforme: 13.600 mm – višina nakladalne površine: 1.100 mm Višina sedla: 980 mm Polmer gibanja zadnje osi: 2.100 mm Vdolbine za nosilce na dnu, vključno z nosilci (ni zagotovljena popolnost) NATO vtičnica Elektro-hidravlična enota Osvetlitev za širjenje Orodjarna Centralni sistem za mazanje Pnevmatike: 235/75 R 17,5 Nosilec za rezervno kolo, VKLJUČNO z rezervnim kolesom Pridržujemo si pravico do sprememb, medprodaje in napak. Opis služi za splošno identifikacijo vozila in ne predstavlja garancije v smislu zakona o prodaji. Odločilni so pogoji, navedeni v pogodbi o prodaji. Naša ponudba na splošno ne vključuje novega tehničnega pregleda. Če je nov tehnični pregled zaželen, vam z veseljem pripravimo ponudbo naših partnerskih servisov! Vozilo je lahko opremljeno z reklamnimi nalepkami in/ali oznakami. Veljajo naši splošni pogoji dobave in plačila.

Stanje: rabljeno, konfiguracija osi: > 3 osi, prva registracija: 01/2019, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 900 mm, skupna dolžina: 13.800 mm, skupna širina: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 245/70R17.5, medosna razdalja: 10.160 mm, barva: rdeča, Leto izdelave: 2019, Oprema: ABS, 1 x dvižna os 3 x krmilna os. Daljinsko upravljanje s pomočjo radia. Hidravlična rampa. Kamera. = Dodatne informacije = Konfiguracija osi Mere pnevmatik: 245/70R17.5 Zavore: bobnaste zavore Vzmetenje: zračno vzmetenje Zadnja os 1: dvojne pnevmatike; profil pnevmatik levo notranji: 50 %; profil pnevmatik levo zunanji: 50 %; profil pnevmatik desno notranji: 50 %; profil pnevmatik desno zunanji: 50 % Zadnja os 2: dvojne pnevmatike; krmilna; profil pnevmatik levo notranji: 30 %; profil pnevmatik levo zunanji: 30 %; profil pnevmatik desno notranji: 30 %; profil pnevmatik desno zunanji: 30 % Zadnja os 3: dvojne pnevmatike; krmilna; profil pnevmatik levo notranji: 40 %; profil pnevmatik levo zunanji: 40 %; profil pnevmatik desno notranji: 40 %; profil pnevmatik desno zunanji: 40 % Zadnja os 4: dvojne pnevmatike; krmilna; profil pnevmatik levo notranji: 60 %; profil pnevmatik levo zunanji: 60 %; profil pnevmatik desno notranji: 60 %; profil pnevmatik desno zunanji: 60 % Teže Lastna teža: 11.344 kg Nosilnost: 54.656 kg Največja dovoljena masa: 66.000 kg Vzdrževanje Tehnični pregled (APK): veljaven do 02.2027 Finančne informacije Cena: Na zahtevo Identifikacija Bodpszp Dryjfx Agtedh Številka modela: max trailer N/A F-S44 / STEERING = Podatki o podjetju = VSE CENE SO NETO ZA IZVOZ. (Joris Versteijnen NL-DE-GB), (Wouter Greutink NL-DE-GB-ES-IT). Govorimo tudi rusko. Po najboljših močeh se trudimo, da navedemo pravilne informacije. Kljub temu iz navedenih besedil ni mogoče pridobiti pravic.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 11.800 kg, največja dovoljena obremenitev: 25.500 kg, skupna masa: 36.800 kg, konfiguracija osi: 3 osi, prva registracija: 10/1998, dolžina tovornega prostora: 13.300 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 450 mm, vzmetenje: zrak, velikost pnevmatike: 245.70 R 17.5, barva: rdeča, Leto izdelave: 1998, Oprema: ABS, Bertoja extendable low loader, 3 axles with 2nd and 3rd self-steering axles, air suspension, ABS, year 1998, cradle length 5.30m with an additional 3.50m extension, ground clearance 45cm, removable module above the axles, adjustable detachable gooseneck, wired remote control for steering self-steering axles, good condition. DEALER: INTERDRIVE SRL - PARMA. Bedpfx Agowg E Rbstedh

Stanje: rabljeno, lastna masa: 10.900 kg, največja dovoljena obremenitev: 43.600 kg, skupna masa: 54.500 kg, konfiguracija osi: > 3 osi, prva registracija: 04/2025, dolžina tovornega prostora: 8.700 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 855 mm, velikost pnevmatike: 245/70 r17.5, barva: siv, Leto izdelave: 2025, obratovalna teža: 10.900 kg, Oprema: ABS, Gooseneck, rigid, center tube design: - Closed outer frame with cutouts for lashing straps (LC 1,500 daN) - Steel floor with anti-slip coating - Including perforated rail for aluminum approach ramps - 2" king pin - Manually operated BPW landing legs - 550 mm long, 8° chamfer at end of gooseneck - Front wall including park position for rear wall, 400 mm high - Spare wheel holder mounted vertically on the front side of the gooseneck - 3 pairs of recessed lashing rings (LC 5,000 daN) in the loading area of the gooseneck - Aluminum side boards, 400 mm high, comprising 2x side boards each 3,150 mm long, and rear board with stanchions (galvanized) - Rectangular aluminium toolbox with folding lid, lockable, approx. 400 x 800 mm, center - 45’ aluminium toolbox with folding lid, lockable, approx. 400 x 800 mm, left - 45’ aluminium toolbox with folding lid, lockable, approx. 400 x 800 mm, right Loading platform, single-extendable: - Closed outer frame with cutouts for lashing straps (LC 1,500 daN) - Fixed section at front 700 mm - Steel plate floor with anti-slip coating - Chamfered transition between fixed part and deck for bridging rails and wheel recesses - Excavator trough including elongated holes for load securing (LC 1,500 daN), length approx. 3,850 mm - Prepared for hydraulic ramps (electrical supply) - Rails to widen up to 3,000 mm - 8° chamfered vehicle rear, 550 mm long - Slide system for easy mounting/dismounting of ramps - Continuous mud flap at the rear - 1 pair of lashing points LC 10,000 daN centrally on the loading area behind the gooseneck - 7 pairs of lashing points LC 10,000 daN in the outer frame of the loading platform - 6 pairs of stanchion pockets 100 x 50 mm in the outer frame of the loading platform - 1 pair of lashing points LC 10,000 daN centrally in the rear section of the loading platform - 1 pair of stanchion pocket rails approx. center of the loading area - 1 pair of stanchion pocket rails on the fixed part - 1 pair of stanchion pocket rails behind the last axle Ramps: - Hydraulic double-folding ramps, 2,750+1,500x800 mm - Larch wood surface - Operated by remote control (wired and wireless) - Quick-change ramp (dismantling system) Chassis: - Axle brand: BPW ECO Max - 2 ride heights - 4 axles @ 10 t (technically 12 t) - Twin tires 245/70 R17.5 - 2 x rigid axles and 2 x friction-steered axles - Reverse steering lock for friction-steered axles via reverse gear - Brake system by Knorr (according to EU standards with EBS-E) - Knorr TIM G2 (Trailer Information Module) - RSS (Roll Stability Support) stability control - Load-dependent lift axle on the first axle incl. starting aid (forced lowering of lift axle via TIM possible) Accessories: - 4 wheel chocks with holder Bsdpfxoi Ai E Rs Agtedh - 2 pairs of warning panels 423 mm x 423 mm, with 2 position lights and socket for rotating beacon, steplessly adjustable up to 3,950 mm - Securing points on gooseneck and on loading platform (alternatively on ramp, if available) included - Plug-in bulkhead at the end of the excavator trough - Electrohydraulic unit for ramp operation - Ramp control by wireless remote - Hydraulic rear support legs for stabilization during loading - 1 pair of additional reversing lights at the rear, activated when reversing - Larch wood widening planks (option)

Stanje: rabljeno, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2017, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.540 mm, skupna dolžina: 13.750 mm, skupna širina: 2.540 mm, skupna višina: 2.730 mm, Oprema: ABS, Številka vozila: YAFSR3005J0021355 TELESKOPSKO PODALJŠAN do 8.200 mm NOSILCI ZA KONTEJNERJE WADER za 1 x 20", 2 x 20", 1 x 40", v izvlečni obliki za 45-palčne kontejnerje DE/HU pregled potreben SAF osi s bobnastimi zavorami Bdsdpfoznqg Isx Agtsh 3 osi s prisilnim krmiljenjem, hidravlično-mehansko, nameščene na vrtljivo ploščo z kabelskim upravljanjem in radijskim daljinskim upravljanjem Avtomatsko centriranje Dimenzije platforme: 13.720 mm - višina nakladalne površine: 1.100 mm Višina sedelne sklopke: 950 - 1.050 mm Polmer obračanja nazaj: 2.100 mm Reže za podpore v podu, vključno s podporami (popolnost ni zagotovljena) NATO vtičnica Elektrohidravlična agregatna enota Osvetlitev za povečano širino Orodjarna Centralno mazanje Pnevmatike: 235/75 R 17,5 Nosilec za rezervno kolo SREDIŠČNO nameščeno rezervno kolo Pridržujemo si pravico do sprememb, prodaje medtem in napak. Opis služi splošni identifikaciji vozila in ne predstavlja garancije v smislu pogodbenega prava o nakupu. Odločilna je opis, določen v pogodbi o nakupu. Naša ponudba na splošno ne vključuje novega tehničnega pregleda TÜV. Če želite nov tehnični pregled TÜV, vam z veseljem pripravimo ponudbo naših partnerskih servisov! Vozilo je lahko oblepljeno in/ali označeno z oglaševanjem. Veljajo naši splošni pogoji dostave in plačila.

Stanje: novo, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.540 mm, skupna širina: 2.540 mm, Leto izdelave: 2026, Oprema: ABS, WEB TRAILER PRSH 27 PLATFORM with Hardwood Floor Dimensions: Chassis width approx. 2,480 mm Bdodpfx Ageg Dkx Eetoh Chassis length approx. 13,620 mm Wheelbase approx. 7,700 mm Landing gear position approx. 2,300 mm from kingpin (for 2-axle tractors only) Driving height: 1,280 mm with 1,150 mm fifth wheel height Spring center approx. 1,300 mm Fifth wheel load max. approx. 12,000 kg Axle loads: 24,000 kg Approval: CoC documents available Chassis: Chassis made of welded longitudinal beams and through-bolted cross members Outer frame height approx. 125 mm, 4 mm with groove for lashing rings 13 pairs of lashing rings (brackets) screwed into the grooves in the outer frame, each rated at 5t!! Landing Gear: 24 t telescopic landing legs from brand manufacturer (Jost/SAF) Axles: Brand manufacturer (SAF/BPW/JOST) 9 t 22.5" large disc brakes, total stroke approx. 180 mm No axle lift (option) Axle spacing approx. 1,310/1,310 mm Brakes: EBS braking system by Knorr or Wabco Air connections with red and yellow coupling heads Lifting and lowering device with 1 rotary slide valve (Knorr/Wabco) Air tanks 2 x approx. 80 l Tire pressure monitoring Lighting system: LED 15-pin front connection Flashing side marker lights Tyres: Premium brand tyres 385/65 R 22.5 on steel rims Bodywork: Steel front wall approx. 1,200 mm high, with sheet metal cladding, bolted construction Floor: Weatherproof 28 mm hardwood floor alternately with galvanized omega steel profiles Hardwood planks bolted onto cross-members (optional double bolting) Floor: Certificate for tested forklift axle load 9.0t according to DIN EN 283 Attachments: Premium, large, and edged rear lamp bracket Welded underrun protection (rectangular tubing) Rear access ladder, right side, foldable and extendable with platform Two wheel chocks with holders, plastic or galvanized Plastic mudguards 180° over each axle Side underrun protection on both sides — aluminum or plastic profile Coating: Chassis painted in RAL 9005 or Novagrey 7350 Other colors at extra cost (subject to powder availability) KTL coating with zinc phosphating plus powder, highest corrosion protection Hot-dip galvanizing (optional) Ex-works price Attention!!! Pictures show special equipment. Get professional advice and a free, non-binding offer. Leasing, financing, or hire purchase available! We can accommodate your requirements! Contact us—we will gladly provide you with an offer. Subject to prior sale and errors!

Stanje: rabljeno, številka stroja/vozila: W09SHL335ATM08351, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.600 mm, širina tovornega prostora: 2.440 mm, višina nakladalnega prostora: 1.700 mm, Leto izdelave: 2010, = Dodatne možnosti in oprema = - Zračno vzmetenje zadaj - Zračno vzmetenje spredaj Bdodpfx Aezclcbsgtoh = Dodatne informacije = Teža Nosilnost: 36.000 kg Dovoljena skupna masa: 7.140 kg Stanje Splošno stanje: povprečno Tehnično stanje: povprečno Videz: povprečen Dodatne informacije Stanje pnevmatik spredaj: 40 % Stanje pnevmatik zadaj: 40 % Pnevmatike spredaj: 385/65 R 22.5 Pnevmatike zadaj: 385/65 R 22.5 Zadnji pregled: 2026-06-04 Dodatne informacije Za več informacij se obrnite na Lastas Sales.

Stanje: novo, največja dovoljena obremenitev: 42.900 kg, skupna masa: 55.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 29.000 mm, skupna širina: 2.540 mm, Oprema: ABS, The complete inventory of vehicles, including those available for immediate and short-term delivery, can be found on our website. Extract from the equipment list. Full specifications available upon request. Loading Platform: * Gooseneck, length approx. 3,900 mm with central beam * Loading platform, double extendable, length approx. 9,300 mm * A support plate, approx. 200 mm wide, is permanently welded to the central beam * Pneumatic locking system with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the current platform length (except for the supply of the first and second locking positions) * Technical fifth wheel load: 25,000 kg Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4 * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, all axles hydro-mechanically forced steered, mounted on turntables * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * 275/70 R 22.5 3PMSF twin tires. Brand at our discretion * ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic power unit for operating hydraulic functions * 3 pairs of recessed lashing rings in the outer frame of the gooseneck, foldable to the outside * 1 pair of lashing rings at the king pin (LC 10,000 daN) – all other lashing rings (LC 5,000 daN) * 3 pairs of stake pockets recessed in the outer frame of the gooseneck for plug-in stakes approx. 100 x 50 mm * 1 stake pocket bar mounted transversely on the gooseneck floor for plug-in stakes approx. 100 x 50 mm * 1x at the rear of the gooseneck * 2" king pin * Mechanical landing gear with 2-speed gearbox and crank * 8 pairs of stake pockets recessed in the outer frame of the loading platform for plug-in stakes approx. 100 x 50 mm * 10 pairs of recessed lashing rings in the outer frame of the loading platform, foldable to the outside * Remote steering from the front and rear via cable remote control, with axle tracking control, no installation required in the tractor unit * Last axle with air bellows venting activated when parking brake is applied Bjdpfxjyvnd Nj Agtsdh * Steel front wall, approx. 1,600 mm high, certified design according to EN12642:2016 XL * Round NATO socket at the front connection bar (Maeler & Kaege VG 96 917) * 1 LED work light on each side at the landing gear, wired to the tractor unit connection bar * Approx. 32 mm wooden floor on the gooseneck and the loading platform * On the large-section extension tube, one locking position every approx. 500 mm * On the small-section extension tube, one locking position every approx. 1,000 mm, enabling locking at every approx. 500 mm * Cut-outs in the outer frame of the loading platform for attaching tension belts (LC 2,500 daN) * 4 stake pocket bars mounted transversely on the loading platform floor for plug-in stakes approx. 100 x 50 mm * 4 wheel chocks with holder mounted under the loading platform * 1 lockable INOX toolbox, approx. 2,390 x 800 x 500 mm (L x W x H), mounted under the loading platform on the left in the direction of travel * 1 additional lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the loading platform on the right in the direction of travel * 1 LED work light each left and right in front of the axles, with wiring * 2 axle load gauges mounted on the left side including axle load diagram * 1st axle equipped with automatic lift axle function as well

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, prva registracija: 06/2016, skupna dolžina: 13.900 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65/22.5, medosna razdalja: 9.970 mm, barva: modra, Leto izdelave: 2016, Oprema: ABS, = Dodatne možnosti in oprema = - Kolutne zavore = Dodatne informacije = Konfiguracija osi Dimenzije pnevmatik: 385/65/22.5 Zavore: Kolutne zavore Vzmetenje: Zračno vzmetenje Zadnja os 1: Profil pnevmatike levo: 30 %; Profil pnevmatike desno: 30 % Zadnja os 2: Profil pnevmatike levo: 30 %; Profil pnevmatike desno: 30 % Zadnja os 3: Profil pnevmatike levo: 30 %; Profil pnevmatike desno: 30 % Bodpfsyzqqpox Agtjdh Teže Lastna teža: 7.362 kg Nosilnost: 31.638 kg Dovoljena skupna masa: 39.000 kg Stanje Tehnično stanje: zelo dobro Optično stanje: zelo dobro Dodatne informacije Za več informacij kontaktirajte Bas Wolfs ali Bas Wolfs.

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, dolžina tovornega prostora: 18.000 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 1.700 mm, skupna dolžina: 18.000 mm, skupna širina: 2.540 mm, skupna višina: 1.700 mm, vzmetenje: zrak, velikost pnevmatike: 435/50-R19.5, Oprema: ABS, - Os BPW - EBS - Povezana os - Zračna vzmetenje - Kolutne zavore Na zalogi, takoj na voljo: MAX200 z nizko nakladalno rampa, spuščen, primeren za obremenitve do 12.000 kg in vertikalno nastavljiv, iztegljiv za 4,5 m, opremljen s sledilno krmilno osjo in dvigalno osjo: Tehnični podatki MAX200-N-3A-13.50-FTR-19.5-2.54 Skupna masa: 45.000 kg Pritisna sila sedelne sklopke: 18.000 kg Nosilnost osi: 27.000 kg Višina sedelne sklopke (obremenjena): 950–1050 mm Dolžina nakladalne površine: 13.500 mm Iztegljivost: 4.500 mm Razdalja med osmi: 1360/1405 mm Širina vozila: 2.540 mm Skupna masa je odvisna od pritisne sile sedelne sklopke. Nakladalna površina: Nakladalna površina v iztegljivi izvedbi s pnevmatsko zaklepno napravo. Nakladalna platforma se lahko hidravlično spusti zadaj za približno 2100 mm. Nosilnost zadnjega vozila v horizontalnem položaju: 6 t. Spuščeno: Vozilo je primerno za obremenitve z nosilnostjo osi 12 t. Bjdpfxez Hci Nj Agtjdh 2 para pritrdilnih točk (LC 5000 daN). 1 par pritrdilnih točk (LC 10000 daN). 6 parov pritrdilnih točk, ki se odpirajo navzven (LC 5000 daN). 2 para pritrdilnih točk, ki se odpirajo navzven (LC 10000 daN). 1 par vodoravnih pritrdilnih točk zadaj (LC 5000 daN). Vdolbine v zunanjem okvirju nakladalne platforme za pritrditev pasov (LC 2000 daN). Sistem za nadzor tlaka v pnevmatikah (TPMS) v skladu z ECE R 141. Os BPW s kolutnimi zavorami. Pnevmatike 435/50 R 19.5 Možnosti: • Rdeče in rumene zračne spojke na pocinkani sprednji priključni plošči. • 2 klini za kolesa z nosilcem. • Pocinkana jeklena pregrada, približno 1.600 mm visoka (približno 35 kg), EN12642-XL • Nakladalna površina iz trdega lesa. • Talna obloga iz trdega lesa na hidravlični nakladalni mizi. • 1 par aluminijastih ramp tipa: VFR 105, 1.500 x 450 x 120 mm (D x Š x V). • Nosilec za aluminijaste rampe pod rampa (približno 88 kg). • 1 nosilec za rezervno kolo pod nakladalno površino na desni strani. • Gibljiv profil za pritrditev ločenih aluminijastih ramp na zadnji del prikolice. • Navodila za uporabo in opis na USB-ključu. • Nosilec za okroglo signalno luč zadaj na desni in levi strani vozila. • Pod gooseneck prikolico in zadaj, na levi in desni strani, nosilec za opozorilne znake z vtičnico. • Elektrohidravlična agregat (približno 45 kg). • 6 parov vdolbin v dnu nakladalne površine za WADER-zaklepe za kontejnerje, za 1 x 20', 2 x 20', 1 x 40' ali 1 x 45'-kontejner (približno 90 kg). • 10 parov cevi za pritrdilne palice (približno 100 x 50 mm) v zunanjem okvirju dna nakladalne površine (približno 30 kg). • 3 pari profilov za pritrdilne palice, nameščenih prečno v dnu nakladalne površine, za pritrdilne palice (100 x 50 mm) (približno 95 kg). • Pocinkane podaljške, iztegljivi za približno 230 mm na stran (približno 262 kg). • Dvigalna os na sprednji osi, upravljana z TEBS E v odvisnosti od obremenitve osi in stanja obremenjenosti (± 69 kg). • 4 opozorilni znaki (širina ± 423 x 423 mm), iztegljivi za ± 400 mm, z LED-pozicijsko lučjo (± 25 kg). • Ključi za vrv (8 mm), približno 500 mm pod robom profila gooseneck prikolice in dna nakladalne površine (± 2 kg). Konfiguracija osi Velikost pnevmatik: 435/50-R19.5 Znamka osi: BPW DISC Zavore: Kolutne zavore Vzmetenje: Zračno vzmetenje Zadnja os 1: Dvigalna os; Maks. nosilnost osi: 9000 kg; Globina profila leve pnevmatike: 100 %; Globina profila desne pnevmatike: 100 % Zadnja os 2: Maks. nosilnost osi: 9000 kg; Globina profila leve pnevmatike: 100 %; Globina profila desne pnevmatike: 100 % Zadnja os 3: Maks. nosilnost osi:

Stanje: rabljeno, prevoženi kilometri: 130.100 km, moč: 368 kW (500,34 KM), prva registracija: 01/2018, vrsta goriva: dizel, lastna masa: 11.725 kg, največja dovoljena obremenitev: 14.275 kg, skupna masa: 26.000 kg, velikost pnevmatike: 315/80R22,5 156/L, konfiguracija osi: 3 osi, medosna razdalja: 4.800 mm, gorivo: dizel, zavore: intarder, barva: drugo, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, velikost sprednje pnevmatike: 315/80R22,5 156/L, velikost zadnje pnevmatike: 315/80R22,5 /150K, Oprema: ABS, klimatska naprava, navigacijski sistem, spojka prikolice, tempomat, zapora diferenciala, zavorni sistem na stisnjen zrak, Meiler odklopni priklopnik, tip: RS 21.67, -- pridržane pravice do tiskarskih napak, napak in sprememb, ilustrativne slike --, več podatkov najdete tukaj: !, več podrobnosti: ! Bdodpfsz Hah Njx Agtoh

Stanje: rabljeno, številka stroja/vozila: ***XL931N5SA1L007510, konfiguracija osi: 3 osi, prva registracija: 01/2001, skupna dolžina: 13.000 mm, skupna širina: 2.550 mm, skupna višina: 2.000 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R17.5, barva: drugo, Leto izdelave: 2001, Chassis Chassis height: 95 cm Kingpin/Saddle coupling diameter: 2 inch Structure Fifth wheel height: 120 cm Special transport Manual ramps: ✓ Length over axles: 890 cm Loading bed length: 890 cm Gooseneck length: 410 cm Extendable: ✓ Tank Bsdpfx Agju H H Exjtsdh Fuel: ✓ = Further information = Axle configuration Tyre size: 245/70 R17.5 Axle manufacturer: SAF Brakes: Drum brakes Suspension: Air suspension Axle 1: Twin-mounted; Left outer tyre profile: 60%; Right outer tyre profile: 35% Axle 2: Twin-mounted; Left outer tyre profile: 15%; Right outer tyre profile: 60% Axle 3: Twin-mounted; Steering; Left outer tyre profile: 30%; Right outer tyre profile: 25% Weights Gross Vehicle Weight: 45,000 kg Functional Body brand: Broshuis Loading platform height: 95 cm Identification Registration number: C119689 = Company information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Stanje: rabljeno, Leto izdelave: 2018, Faymonville Maxtrailer F-S43-1AAF. Letnik: 2018. 9-tonske osi SAF. Teža: 9961 kg. Največja dovoljena teža: 45.000 kg. Nosilnost čepne prikolice: 18.000 kg. Servo volan za 3 krmiljene osi. 7,5 metra, raztegljiva. Zračno vzmetenje. Orodjarske omare RVS. Radijski daljinski upravljalnik. 1. dvižna os. Bdsdpfxszybzys Agtjh EBA ABS ALB. Dimenzije nosilne površine: D: 13.550 mm. Š: 2480 mm. V: 1400 mm. V: Aluminijaste plošče: 600 mm. Pnevmatike: 385/65R22,5, 70 %. Številka: 513. Splošni pogoji poslovanja podjetja Heinhuis veljajo za vse oglase, ponudbe in cenitve podjetja Heinhuis, vse pogodbe, sklenjene s podjetjem Heinhuis, in pogajanja, ki jim predhodijo. S kakršnim koli odgovorom potrjujete veljavnost splošnih pogojev poslovanja podjetja Heinhuis in izjavljate, da ste se seznanili s temi splošnimi pogoji poslovanja. Naše cene so izvozne cene brez davka. = Dodatne informacije = Letnik: 2018 Lastna teža: 9.961 kg Nosilnost: 35.039 kg Dovoljena skupna masa: 45.000 kg Raztegljiva nadstavba: Da = Informacije o podjetju = Za več informacij:

Stanje: dober (rabljeno), lastna masa: 8.760 kg, največja dovoljena obremenitev: 25.240 kg, skupna masa: 34.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2022, prostornina tovornega prostora: 92 m³, velikost pnevmatike: 385/65 R22.5, Leto izdelave: 2022, Oprema: ABS, SCHWARZMÜLLER - WALKING FLOOR STEEL FLOOR! Bsdevx E N Aepfx Agtjdh 4 units available! Brand: SCHWARZMÜLLER Type: J-Series S1 First Registration: 03/2022 Unladen Weight: 8,760 kg Payload: 25,240 kg Gross Weight: 34,000 kg Technical Max. Gross Weight: 39,000 kg - Heavy-duty and wear-resistant L-shaped steel floor profiles! -- STEEL FLOOR! -- Aluminum chassis -- Volume: approx. 92 m³ -- Reinforced side walls, continuous interior aluminum wear plates -- Aluminum superstructure -- Swing doors -- ABS/EBS -- SAF axles -- Lift axle -- Disc brakes -- Air suspension -- Sliding tarpaulin -- Standing platform at front wall -- Raise and lower device -- Radio remote control -- Toolbox -- Underride protection -- Spare wheel holder -- Tires: 385/65 R22.5 Tread approx. 70% / 80% / 90% -- etc… Would you like to visit us? We offer a complimentary pick-up service from the train station in 4020 Linz. We handle all customs formalities for you. Want to trade in your used vehicle? ...If an agreement is reached, we are happy to accept your trade-in. This offer is non-binding and subject to prior sale. Errors and interim sale excepted.

Stanje: novo, skupna masa: 58.000 kg, Leto izdelave: 2026, MAX100 4 A 8.60 U Low Loader Semi-Trailer Technical Specifications Bdodpfxjg Sk T De Agtjh Speed: 80 km/h Gross weight: 60,800 kg Fifth-wheel load: 18,000 kg Axle load: 42,800 kg Unladen weight: Payload: Gooseneck length: 3,850 mm Loaded fifth-wheel height: 1,250 mm Loading area length: 8,600 mm Extendable by: 5,400 mm Axle spacing: 1,360 mm Rear steering radius: 2,300 mm Loading height at max. load: 860 mm Overall width: 2,540 mm Suspension travel: -55/+145 mm Technical Description Gooseneck With front corners chamfered at 45° and rear bevel approx. 760 mm x 10° 3 pairs of lashing rings (LC 5,000 daN) Hardwood flooring, 30 mm thick Loading area, extendable version with rear bevel approx. 1,000 mm x 8° 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) 1 pair of horizontal lashing rings at front of loading area (LC 10,000 daN) Hardwood flooring approx. 48 mm thick, checker plate over axles Ramps Two-piece steel ramps One pair of galvanized two-piece steel ramps approx. 2,750 + 1,400 mm x 800 mm with approx. 48 mm thick hardwood covering Ramp with hydraulically folding ramp sections, hydraulic lifting system and hydraulically adjustable. Maximum load capacity per pair: 40,000 kg Tyres 235/75 R 17.5 Braking system in accordance with EU standards with EBS-E (4S3M) without connecting lines to the tractor unit Paintwork First-class, durable corrosion protection of the standard shot-blasted welded frame guaranteed by 2-component zinc-dust primer High-quality 2-component (2K) topcoat, single-color finish in RAL shades of your choice Rear section metallized and painted in RAL 9010 (pure white) Landing Gears: JOST mechanical landing gears with 2-speed gearbox for 24 t Lifting capacity (test load 50 t) Steel structure made of high-strength fine-grain steels. Steel Grades: Steel structure made of high-strength fine-grain steel S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrics in accordance with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets. Connection in accordance with ISO. 24N ISO-1185 24S ISO-3731 15 pin ISO-12098 Accessories included: One galvanized steel front wall approx. 400 mm high 2" king pin 4 wheel chocks with holder on the front wall Bracket for a rotating beacon at rear of the trailer SAF axles, two fixed axles, one trailing-steering axle, air-suspended, with drum brake, with lifting/lowering function. Trailing steering axle with electro-magnetic reverse lock, can be activated via reverse gear or manually. Axle tools Mounting at the rear of the gooseneck for ALU loading ramps Galvanized folding supports under the bevel of the loading area Mechanical safety lock for the loading area One spare wheel with holder in front of the front wall Yellow reflective tape along the sides, extension and rear of trailer, in accordance with EU regulations. At the galvanized front connection strip, yellow-red air couplings On gooseneck and rear plate left and right, each with mount for warning plates and socket included Mudflap at trailer rear Manual and documentation On gooseneck, plug-in ALU sideboards and rear wall approx. 2,440 x 400 mm (L x H) The rear galvanized stake pockets are removable Body length approx. 2,560 mm, +/- 46 kg 3 pairs WADER container locks in the loading area for a 20', 30' or 40' container (± 30 kg) 6 pairs of stake pockets for plug-in stakes

Stanje: novo, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Ojačana izvedba, z zračno vzmetjo in dvigalno osjo, manometer za merjenje obremenitve osi, dolžina zgornje platforme približno 4.400 mm, vključno s poševnino, dolžina spodnje platforme približno 8.500 mm, višina nakladalne površine približno 900 mm, za vlečno vozilo z 2 ali 3 osemi, nastavljiv priklopni člen, čelna stena, 16 nosilcev za pritrditev na zunanjem okvirju, 32 pritrdilnih točk, rampa dolžine približno 3.100 mm, rampe z oprijemnimi letevmi na zunanji strani, rampe za prečkanje na goosenecku. Dodatne možnosti proti doplačilu: zadnja os kot vodilna os, opozorilne table + razsvetljava in okrogla luč, širitev na 3 m s pomočjo podaljškov. -- Pridržane pravice do sprememb, napak in tiskarskih napak, ilustrativne slike --, več podatkov na: !, Več podrobnosti: ! Bedpfoz Hancjx Agtodh

Stanje: novo, največja dovoljena obremenitev: 39.000 kg, skupna masa: 50.100 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, skupna višina: 860 mm, Oprema: ABS, MAX Trailer Type 110 NEW | Hydraulic steering – extendable | 39t payload | 3 axles | from €97,400 New vehicle, customizable to your specific operation requirements. High payload with robust design and maximum cost-efficiency. ----Highlights: • Extendable loading platform with durable 48 mm hardwood floor • Galvanized steel ramps with hydraulic lifting mechanism (up to 40,000 kg load capacity) • Hydro-mechanically forced-steered BPW axles with air suspension • Heavy-duty lashing points for professional load securing • WABCO EBS braking system according to EU regulations • LED lighting system • Mechanical JOST landing legs with 2-speed gearbox • Tire Pressure Monitoring System (TPMS) Bodsypa Rgepfx Agtsdh ----Body & Construction • High-tensile fine-grained steel construction • Metallized vehicle chassis for optimal corrosion protection • Multi-layer paint structure with additional cavity sealing • Checker plate above axles for increased durability Very important for trust. ----Included options • Galvanized front wall (approx. 400 mm) • Electro-hydraulic power pack • Convenient cable remote steering • Spare wheel with holder • Galvanized folding supports • Extendable warning panels with LED • Beacon bracket • Reflective tape according to EU regulations ----Further equipment and customizations available at any time – we configure your vehicle exactly to your requirements. Sample photo. Equipment may vary depending on configuration.

Stanje: rabljeno, konfiguracija osi: > 3 osi, dovoljena osna obremenitev (os 1): 12.500 kg, dovoljena osna obremenitev (os 2): 12.500 kg, dovoljena osna obremenitev (os 3): 12.500 kg, prva registracija: 07/2000, skupna dolžina: 15.410 mm, skupna širina: 2.540 mm, skupna višina: 890 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R17.5, stanje pnevmatik: 50 odstotek, medosna razdalja: 12.460 mm, barva: drugo, Leto izdelave: 2000, Oprema: ABS, dvižna zadnja plošča, = Druge možnosti in dodatki = - 4 OSI - Zadnja loputa - Hidravlika - Zračno vzmetenje - Krmiljena os = Dodatne informacije = Konfiguracija osi Dimenzija pnevmatik: 245/70 R17.5 Znamka osi: SAF Zavore: bobnaste zavore Zadnja os 1: dvojna guma; Največja osna obremenitev: 12.500 kg; Profil pnevmatik: 50% Zadnja os 2: dvojna guma; Največja osna obremenitev: 12.500 kg; Krmiljena; Profil pnevmatik: 60% Zadnja os 3: dvojna guma; Največja osna obremenitev: 12.500 kg; Krmiljena; Profil pnevmatik: 70% Zadnja os 4: dvojna guma; Največja osna obremenitev: 12.500 kg; Krmiljena; Profil pnevmatik: 30% Teže Lastna teža: 12.800 kg Nosilnost: 68.450 kg Skupna dovoljena masa: 81.250 kg Stanje Splošno stanje: povprečno Bsdpfx Aoz Azb Ssgtodh Tehnično stanje: povprečno Vizualno stanje: dobro Identifikacija Registrska številka: ZZ-98-52

Stanje: novo, lastna masa: 12.900 kg, največja dovoljena obremenitev: 34.100 kg, skupna masa: 47.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.850 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 350 mm, vzmetenje: drugo, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 12.900 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading platform length, approx. 3,750 mm in length - Gooseneck hydraulically liftable/lowerable and detachable - Technical fifth wheel load: 23,000 kg - For tractor units: 4x2, 6x2, and 6x4 Bdodpfx Ashlz R Sjgtoh Loading Platform: - Low-bed with external beams, extendable “SUPER LOW” design, approx. 6,850 mm in length - Low-bed with fixed hardwood flooring, approx. 40 mm thick, with mechanical locking device Rear Chassis: - Rear chassis with closed outer frame, chequer plate covering, and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear - 2 pairs of lashing rings, foldable to the outside - 1 pair of lashing rings recessed in the trough - 2 pairs of stake pockets for insertable stakes 100 x 50 mm in the external frame Pendulum Axle and Tyres: - "PENDULUM AXLE", all axles hydromechanically forced-steered - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and safety locking pins for securing in raised position - Axles painted with two layers of single-colour 2K paint in “FAY-Grey-34-0260” - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres 245/70 R 17.5 - TPMS tyre pressure monitoring system according to ECE R 141 Accessories: - Preparation for the installation of bolt-on container locators for 1 x 20ft or 1 x 40ft container on the outer girders - 2" king pin - One galvanized steel front wall, approx. 400 mm high - One spare wheel - Yellow-red air couplers on the galvanized front connection bar - 4 wheel chocks - Remote steering from front and rear, operable via wired remote control with push buttons, with single-track alignment control - Hydraulic connections from gooseneck to low-bed with multi-coupling instead of screw couplings - Electro-hydraulic power unit - White reflective tape in accordance with EU regulations on sides, extension, and rear - European reflective plates (red-yellow) on the rear of the trailer - One bracket on each side of gooseneck and rear plate for warning panels, including socket - 6 pairs of threaded blocks between the lashing rings under the top chord on outer beam for mounting screw-on RUD Rings VLBG-4 - Detachable ALU side boards and rear board on the gooseneck, approx. 2,440 x 400 mm - Rear galvanized insertable stakes are removable (body length approx. 2,560 mm) - Gooseneck rear upper area covered with removable cover - 5 pairs of stake pockets for insertable stakes 100 x 50 mm in the outer frame of the loading area - Folding extensions, approx. 230 mm per side - 2 pairs of bolted RUD Rings VLBG-4 M24 (LC 8,000 daN) - 1 pair of steel ramps for bridging the mounting hooks of the low-bed - Anti-skid sand layer painted on loading surface - 80 km/h speed stickers at rear and both sides - Spoon boom trough at rear chassis closed at rear with plug-in plate - Four extendable warning panels approx. 423 x 423 mm, extendable by approx. 400 mm - Radio remote control for rear axle steering in addition to cable remote, with indicator lights on receiver for alignment control - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard NLGI-2 grease - Load pressure gauge for determining axle loads - HRM Metallisation (High Resistance Metallisation) of outer frame - Complete steel structure shot blasted, then all defined visible areas metallized and finished with ZINACOR 850 (zinc 85% - aluminium 15%) hot galvanizing

Stanje: rabljeno, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2018, dolžina tovornega prostora: 13.720 mm, širina tovornega prostora: 2.540 mm, skupna širina: 2.540 mm, Oprema: ABS, Vehicle identification no.: YAFSR3001J0021353 Extendable by 8,200 mm with sliding table Container pockets WADER for 1 x 20", 2 x 20", 1 x 40", extendable to 45" container German MOT (HU) valid until 02/2027 – Safety inspection (SP) until 08/2026 SAF axles with drum brakes 3 hydraulically-mechanically steered axles on turntable with cable control and radio remote control Automatic self-tracking Platform dimensions: 13,720 mm – loading height: 1,100 mm Fifth wheel height: 950 – 1,050 mm Rear steering angle: 2,100 mm Stake pockets in the floor, including stakes (completeness not guaranteed) NATO socket Electro-hydraulic power unit Width marker lighting Toolbox Central lubrication system Tyres: 235/75 R 17.5 Spare wheel holder WITH spare wheel Modifications, prior sale, and errors excepted. This description serves for general vehicle identification and does not constitute a warranty in the legal sense of sale of goods law. The specification in the purchase contract is decisive. Our offer is generally without new TÜV (MOT) approval. If a new TÜV approval is required, we can provide an offer through our partner workshops! The vehicle may be equipped with stickers and/or advertising. Our general terms and conditions of delivery and payment apply. Bsdjyw Dl Ejpfx Agtedh