Faymonville G-Modul Vesseldeck nakup rabljenega (32.833)

Stanje: novo, lastna masa: 15.900 kg, največja dovoljena obremenitev: 63.500 kg, skupna masa: 68.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 12.700 mm, širina tovornega prostora: 2.740 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75/r17,5, barva: siv, obratovalna teža: 52.100 kg, Oprema: ABS, Gooseneck: Gooseneck in SNT design for optimal load bed length, approx. 3,300 mm long, rear with taper approx. 1,000 mm x 10° Technical fifth wheel load: 23,000 kg For tractor units: 6x2, 6x4, and 8x4 Load bed: Extendable load bed, approx. 9,400 mm long with rear taper approx. 500 mm x 10° A recess in the load bed as well as in the tapering section for accommodating the excavator dipper stick, approx. 3,850 x 950 x 210/290 mm Pneumatic locking with conical locking bolt and reinforced locking positions, service lines are protected within the extendable beams and automatically adapt to the respective bed length Axles and Tires: BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanically forced steered Technical axle load: 12,000 kg Fedpfx Acomfqi Isgepg Air suspension with lift and lower valve Axle tool 235/75 R 17.5 3PMSF twin tires Load index 143/141J (144/144F) Two-piece steel ramps: One pair of two-piece steel ramps, approx. 4,350 mm long and approx. 900 mm wide Hardwood covering Hydraulically folding ramp tips, each ramp hydraulically adjustable approx. 235 mm outward and approx. 215 mm inward Braking system: Braking system by WABCO EBS-E according to EU regulations Sockets and lighting: 24-volt lighting system Full metallization: Complete HRM metallization with ZINACOR 850 for optimal corrosion protection Surface treatment: Entire steel structure automatically blast cleaned with shot blasting after welding Second blasting treatment with corundum for optimal coating adhesion Final painting: 2 coats of 2-component paint in Novagrau, followed by sealing of cavities with special wax Rims in silver-grey Steel construction: Steel construction from high-strength fine-grained steels Steel grades: S355J2+N/S355MC S690QL/S700MC Accessories: Plug-in steel front wall, approx. 400 mm high Connection rail for service lines to the tractor unit Spiral cable for supplying the electro-hydraulic unit and/or electric winch between trailer and tractor unit, with plug for the electro-hydraulic unit to control hydraulic operations, except for hydraulic winches Outer beam of gooseneck with mounting holes for bolted lashing rings First hole approx. 200 mm from the front, thereafter approx. every 400 mm One mounting hole in the rear upper area of the outer gooseneck beam for a bolted lashing ring Approx. 40 mm thick hardwood floor on the gooseneck, checker plate floor over the kingpin Guide plate on gooseneck for the fifth wheel plate, approx. 500 mm wide On the load bed, continuous and between the axles intermittent approx. 50 mm thick hardwood floor Load bed locking with conically welded locking profiles every 250 mm, including preload plate Slotted holes for attachable and movable bridging elements: on the fixed section behind the gooseneck at the front of the load bed 1 movable intermediate table for the extension tube with large cross-section Control valves for the hydraulic ramps on the right side of the vehicle Central lubrication system with 1 pump, standard grease according to NLGI-2 Radio remote control for steering operation, in addition to cable remote control, with 2 control lights on the receiver for single-track steering monitoring

Stanje: rabljeno, številka stroja/vozila: 32602, prva registracija: 01/2005, velikost pnevmatike: 385/65 R22.5, konfiguracija osi: 3 osi, barva: drugo, vzmetenje: zrak, Leto izdelave: 2005, Rezervoar Gorivo: ✓ = Dodatne informacije = Fpjdpfsu H Ap Hsx Acgeg Dimenzija pnevmatik: 385/65 R22.5 Znamka osi: Ror Zavore: Bobnaste zavore Vzmetenje: Zračno vzmetenje Os 1: Profil pnevmatike levo: 75 %; Profil pnevmatike desno: 70 % Os 2: Profil pnevmatike levo: 80 %; Profil pnevmatike desno: 90 % Os 3: Profil pnevmatike levo: 85 %; Profil pnevmatike desno: 60 % Dovoljena skupna masa: 40.000 kg Registrska označba: C209991 = Podatki o podjetju = Za več informacij o tej enoti pokličite: ali pošljite e-pošto: . Celoten pregled zaloge najdete na: . Ne pozabite se naročiti na naše novice za tedenske posodobitve zaloge.

Stanje: novo, največja dovoljena obremenitev: 33.750 kg, skupna masa: 47.000 kg, konfiguracija osi: 2 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our full inventory of immediately and short-notice available vehicles on our website. Excerpt from the equipment list. Complete equipment details available upon request. Gooseneck: - Gooseneck in SNT design for optimized loading deck length, approx. 3,750 mm - Gooseneck hydraulically lift/lower and detachable - Technical fifth-wheel load: 23,000 kg - For tractor units: 4 x 2, 6 x 2, and 6 x 4 Low bed: - Low bed with external beams, extendable SUPER LOW design, approx. length 6,850 mm - Low bed with fixed hardwood floor (approx. 40 mm thick) and mechanical locking - Supply lines protected within the extendable beams, automatically adjusting to bed length - 5 pairs of lashing rings, outward folding (LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for screw-mounted RUD rings Fpsdpfsxbmn Ujx Acgsg Rear undercarriage: - Rear chassis with closed outer frame, checker plate surface, continuous prism excavator recess, approx. 1,250/700 x 505 mm, open at the rear - 2 pairs of lashing rings, outward folding (LC 10,000 daN) - 1 pair of flat lashing rings in the recess LC 16,000 daN - 1 pair of flat lashing rings in the recess LC 10,600 daN - 2 pairs of stake pockets for removable stakes approx. 100 x 50 mm in the outer frame PENDLE-AXLE: - PENDLE-AXLE, all axles hydro-mechanically forced steering - Burst protection valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and locking pins for secure positioning when raised - Final painting of axles with 2 coats of 2-component paint, single color in FAY grey 34-0260 - Technical axle load: 12,000 kg each, hydraulic axle compensation - Axle tools - Tyres: 245/70 R 17.5 3PMSF – manufacturer at our discretion, load index (146/146F) TPMS: - TPMS tire pressure monitoring system according to ECE R 141 Braking system: - WABCO braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Electrical system: - Electrical system according to EU regulations, 24V ASPÖCK-NORDIK (ASS3) lighting - All LED side marker lights flash with indicator - ASPÖCK-UNIBOX on the front terminal strip with 24N, 24S & 15-pin sockets. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel construction: - Steel construction made of high-strength fine-grained steel - Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Paintwork: - Complete steel structure automatically shot-blasted with a blast wheel system after welding - Second blasting with corundum for optimum coating adhesion - HRM metallization of the entire chassis using ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection - Final coating with two layers of 2K top coat, single color in RAL 3002 carmine red, in accordance with RAL system 841GL Including the following additional features: - 2-inch kingpin - One galvanized steel front wall, approx. 400 mm high - Rear and front axle steering via cable remote control with push buttons and single track control of axles (without installation in tractor unit) - Electro-hydraulic unit - 2 pairs of bolted container locks on the outer beams. Including 2 pairs of container fastenings for 1x 20' or 1x 40' container - On the gooseneck, plug-in aluminum side boards and rear wall, approx. 2,440 x 400 mm (L x H) - The rear galvanized plug-in stakes are removable

Stanje: rabljeno, največja dovoljena obremenitev: 39.780 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, prva registracija: 01/2023, naslednji pregled (TÜV): 01/2027, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete stock of immediately and short-term available vehicles on our website. Excerpt from equipment. Full equipment list available upon request. Gooseneck: * Gooseneck with beveled front corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood floor approx. 30 mm thick Loading Platform: * Extendable loading platform * 5 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) * Cut-outs in the outer frame of the platform for attaching tension straps (LC 2,000 daN) * Hardwood floor approx. 48 mm thick, over axles with chequer plate flooring Landing Legs: * JOST mechanical landing legs with 2-speed gearbox for 24 t lifting capacity (50 t test load) Fpjdjx Uvlrjpfx Acgog Tyres: * Tyres 205/65 R 17.5 twin-mounted Axles: * BPW axles, two rigid axles, two steering trailing axles, air suspension, drum brake with raise/lower function * Steering trailing axles equipped with electro-magnetic reverse lock, activated by reverse gear or manually Brake System: * Brake system in accordance with EU regulations with EBS-E (4S3M) without connections to the tractor unit Steel Construction: * Steel construction made of high-tensile fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Paintwork: * Premium and durable corrosion protection of the standard shot-blasted welded frame, provided by a two-component zinc-rich primer * High-quality, single-color two-component top coat in RAL 3002 Carmine Red * Rear section metallized and painted RAL 9010 (Pure White) * Wheels in silver Electrical System: * Electrical system in accordance with EU regulations Lighting: * 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Included Accessories: * 2" kingpin * Galvanized steel front wall, approx. 400 mm high * Spare wheel carrier in front of the front wall * Yellow-red air couplings on the galvanized front connection panel * 4 wheel chocks with holders on the front wall * Provision at rear of gooseneck for ALU loading ramps * Galvanized folding supports under the sloped section of the platform * Holder for a warning beacon at the rear of the trailer * Yellow reflective tape in accordance with EU regulations on the sides, extension, and rear of the trailer * Mountings for warning boards left and right on the gooseneck and rear panel, including power socket * One mudflap at the rear of the trailer * Manual and description on USB stick * European reflective signs (red-yellow) at the rear of the trailer * 80 km/h speed stickers at the rear and on both sides * Acoustic reverse warning signal * Load gauge for determining axle loads, including load diagram

Stanje: rabljeno, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2017, * SAF osi * Kolesni jaški * Hidravlične nakladalne rampe nastavljive po širini * Zračno vzmetenje * Razširljiv * Lastna teža: 11.020 kg -----Interna številka vozila: 11010----Pridržujemo si pravico do napak in vmesne prodaje. Fpedpfx Aswta Aljcgeg WhatsApp podpora na voljo! Za vprašanja o vozilu ali dodatne informacije nam pišite preko WhatsAppa. WhatsApp nemščina, angleščina -- WhatsApp nemščina, angleščina, arabščina

Stanje: rabljeno, največja dovoljena obremenitev: 40.800 kg, skupna masa: 53.800 kg, konfiguracija osi: 3 osi, prva registracija: 11/2012, naslednji pregled (TÜV): 11/2025, Oprema: ABS, Faymonville 4-osovinski Multimax STN-4AX niskopodni teleskopski poluprikolica Godina proizvodnje: 11.2012 Tara: 13.000 kg Dozvoljena ukupna masa: 53.800 kg Tehnički dozvoljena masa: 55.400 kg Nosivost: 40.800 kg Podpritisna sila: 25.000 kg Dimenzije guma: 205.65R17,5 3. i 4. osovina – prinudno upravljane 4x SAF osovine 7.600 kg sa vazdušnim ogibljenjem Dužina: 13.475 mm do 20.275 mm (izvlačiva) Širina: 2540 mm do 2620 mm Visina: 1200 mm ! Dodatne informacije na zahtev putem e-maila ! Podaci su informativni i bez garancije na tačnost! Informacije dostupne na internetu su neobavezujući opisi i ne predstavljaju zagarantovane karakteristike. Prodavac ne odgovara za greške, tipografske greške ili greške u prenosu podataka. Zadržavamo pravo na izmene. Stalan otkup i prodaja, kao i zamena i iznajmljivanje dizalica i podiznih vozila, Fpsdpfx Aceu Aynljgsg kao i građevinskih i teških vozila.

Stanje: rabljeno, We offer flexible and customized space solutions. Whether you’re looking to buy or rent, new or used, we’ll find the right solution for you. Contact us for a non-binding quote. To process your request as quickly as possible, please provide the following information: 1. Official email address and company name to which we can send our offer. 2. Postal code for the delivery location of the container(s). 3. Telephone number for any further inquiries. Modular Office Building Lake Constance – Display Model: Object: Office building in modular construction Type: MODUL 25010 Usable area: approx. 1,944 m² Floors: 3 Condition: Display building (as new) Ideal applications: - Office and administration buildings - Training or seminar buildings - School / daycare / cafeteria - Research or laboratory spaces Technical specifications: Total area: 1,944 m² Area per floor: approx. 648 m² Building length: approx. 60.10 m Building width: approx. 12.01 m External height: approx. 9.89 m Internal room height: approx. 2.75 m Floor load capacity: 350 kg/m² (hallway/staircase 500 kg/m²) Insulation: 160 / 200 / 120 mm mineral wool Façade: Sheet metal louvre, coated in RAL 7016 Windows: Floor-to-ceiling aluminium windows, triple-wing, U=1.1 W/m²K Sun protection: External electric venetian blinds Ceiling: Suspended ceiling with LED recessed luminaires Floor: CETRIS 22 mm Doors: Interior: wood; Exterior: aluminium (thermally insulated) Heating: Electric heating (other systems optional) Air conditioning: Pre-fitted for split-type air conditioning Electrical installation: According to DIN 400 / 230 V Features & Comfort: Modern space layout with team zones, offices, meeting rooms and breakout areas Data cabling pre-installed Lighting with energy-saving LED technology Optionally available: External staircases, entrance canopy, central electrical distribution Price overview: New price: from €4,082,400 Special price (display building): from €1,944,000 plus VAT Fodpfex Anppox Acgopg _____ Not quite what you’re looking for? Contact us. Our team is here to assist you.

Stanje: novo, lastna masa: 12.300 kg, največja dovoljena obremenitev: 37.200 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with rear chamfer of approx. 750 mm x 10° - 30 mm thick hardwood flooring Two-part steel ramps: - One pair of galvanized two-part steel ramps approx. 3,185 x 1,420 x 1,250 mm with grating surface - Ramps with hydraulically foldable ramp sections and hydraulic lifting system Gooseneck: - Gooseneck with rear chamfer of approx. 750 mm x 10° - 3 pairs of lashing rings - 30 mm thick hardwood flooring Two-part steel ramps: - One pair of galvanized two-part steel ramps approx. 3,185 x 1,420 x 1,250 mm with grating surface - Ramps with hydraulically foldable ramp sections and hydraulic lifting system - Maximum load capacity per pair: 30,000 kg Loading area: - Loading area with rear chamfer of approx. 1,000 mm x 8° - Hardwood flooring approx. 48 mm thick, chequer plate flooring above the axles Axles and tires: - BPW axles and suspension, two rigid axles, one self-steering trailing axle - Air suspension with lift and lower valve - The trailing steering axle with electro-magnetic reversing lock, activated by reverse gear or manually - Tyres 235/75 R17.5 3PMSF Included accessories: - 1 spare wheel with holder - TPMS tyre pressure monitoring system according to ECE R 141 - 2" kingpin - One galvanized steel front wall - Yellow-red air couplings on the galvanized front connection rail - 4 chocks with holder on the front wall - Rear mounting area on the gooseneck for ALU approach ramps - 3 heights of aluminium planks - Galvanized folding supports under the loading area chamfer - Height-adjustable tarpaulin body (3,960 mm) - Galvanized front wall with tensioning mechanism for sliding curtain - Height adjustable by approx. 400 mm - "EDSCHA" brand roof, forward-sliding on ALU roof beam profiles, bolted to front and rear walls - 3 pairs of movable stakes in the loading platform - The superstructure is hydraulically extendable at the rear to the left and right by approx. 750 mm - Sliding roof with high-swivelling portal beam - Sliding curtain with 700 mm length surplus, with tensioning straps spaced approx. 600 mm apart - Height to top of the body: approx. 3,960 mm - Driving with open sliding roof is not permitted and will damage the curtain - Cover plates to bridge the gap between ramps and loading area Fpodpfstvfkfsx Acgjg - Rear electro-hydraulic unit under the loading platform - On gooseneck and ramps, each side with one holder for warning signs including socket - Ramp control valves located on right-hand side of trailer - 6 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading area - Lift axle on the front axle - Grating surface in the chamfer of the loading area C40/4 (point load 3.4 t on an area of 20 x 20 cm) - One INOX toolbox 565 x 290 x 810 mm, mounted on the right side in the direction of travel between the axles - Painted sand layer as anti-slip protection on the chequer plates on the gooseneck and loading area - BEKAMAX (Pico) central lubrication system with NLGI-2 standard grease and removable cover for the pump - Four extendable warning signs (approx. 400 mm each) approx. 423 x 423 mm with position light - Axle load gauge including load diagram - HRM metallization (High Resistance Metallisation) of the outer frame - Entire steel structure shot-blasted, afterwards defined visible surfaces metallized with ZINACOR 850 (zinc 85% - aluminium 15%) hot-refined

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: YA9TL510050113953, lastna masa: 27.720 kg, največja dovoljena obremenitev: 70.000 kg, skupna masa: 100.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2005, naslednji pregled (TÜV): 12/2026, dolžina tovornega prostora: 14.200 mm, širina tovornega prostora: 3.250 mm, skupna dolžina: 23.950 mm, skupna širina: 3.250 mm, skupna višina: 1.050 mm, vzmetenje: hidravlika, barva: modra, Leto izdelave: 2005, število osi: 7, Naprodaj je nizkopodni priklopnik Faymonville. Število osi 2+5 = 7 Vedno vzdrževan v lastni delavnici in je v VRHUNSKEM stanju. Priklopnik je bil uporabljen izključno za prevoze v EU – baltske države, Nemčijo in okolico. Približno 1-2 krat na tri mesece. Nizkopodni priklopnik se nahaja v Latviji, 3405 Liepaja! Podrobnosti po slikah! Fpjdpfx Aex Afbvscgeg

Stanje: novo, največja dovoljena obremenitev: 73.540 kg, skupna masa: 102.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from equipment features. Full equipment list available upon request. Gooseneck: * Hydraulically liftable/lowerable and detachable gooseneck, length approx. 3,650 mm * 2 pairs of folding lashing rings on the outside (LC 5,000 daN) * 2 pairs of lashing rings on the gooseneck (LC 10,600 daN) * 1 pair of lashing rings at the center section of the gooseneck (LC 10,600 daN) * Suitable for 6x4 or 8x4 2-axle tractor units Compact Front Chassis: * Hook mounts at front and rear, length approx. 2,200 mm * Chassis width: approx. 2,850 mm Excavator Deck: Telescopic excavator deck with drive-over deck hooks at the front and bolt-lug coupling at the rear * Base width: approx. 2,850 mm * Length: approx. 6,650 mm * Beam height: approx. 400 mm * Beam width: approx. 1,350 mm * Loading height approx. 550 mm with ground clearance approx. 150 mm 4-axle Rear Chassis: * Mechanical bolt-lug coupling for attaching a low bed at the front * Rear end cross member chassis width: approx. 2,850 mm * Chassis length: approx. 5,480 mm Pendulum axles, all axles hydro-mechanically steered * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation Tyres * Front chassis: 8 x 285/70 R19.5 M+S at manufacturer’s choice * Rear chassis: 16 x 285/70 R19.5 M+S at manufacturer’s choice * Load index 150/148J Paintwork: * Complete steel construction automatically blasted with shot-blasting system after welding. Second blasting with corundum for optimal adhesion of coating system * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure superior corrosion protection * Final paint in 2 coats of 2K topcoat, single color in RAL 3002 carmine red, according to RAL system 841GL Including the following accessories: * Steel front wall, approx. 400 mm high * Plug-in ALU side and rear walls on the gooseneck, approx. 400 mm high, anodized finish * 3.5” kingpin * Truck hydraulic connection with flow regulator (20 l/min) * Crane for supply line suspension; tractor unit fuel tank must have a minimum capacity of 80 l * With MAX Trailer coupling pieces, otherwise coupling pieces to be supplied by customer ex works * BEKA-MAX central lubrication for a gooseneck with standard grease NLGI-2 * Tool kit Art. No. 612452 * Multi-coupler hydraulic connections on the gooseneck * Front chassis with separate air connection for air impact wrench * BEKA-MAX central lubrication for a 2-axle chassis with standard grease NLGI-2 * One 7-pin socket left and right rear on front chassis for warning signs * Threaded insertion option (ø approx. 40 mm) every 500 mm on the upper flange of the excavator deck’s outer tube for lashing rings (LC 16,000 daN) * Folding extensions with steel mats, width adjustable from approx. 2,850 mm to approx. 3,250 mm * BEKA-MAX central lubrication for a 4-axle chassis with standard grease NLGI-2 Fpedoxbmplspfx Acgog * Socket on rear chassis for remote cable control of steering * Rear chassis with trough * Two INOX toolboxes, approx. 855 x 340 x 390 mm, on gooseneck left and right * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery * Radio remote control: * Operation of the power pack, start/stop of diesel engine * Operation of steering, in addition to cable remote control * One LED work light left and right on gooseneck rear plate with protect...

Stanje: novo, največja dovoljena obremenitev: 38.140 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our full range of immediately and short-term available vehicles on our website. Excerpt from the equipment. Full equipment list available on request. Gooseneck: - Gooseneck with approx. 45° chamfered front corners and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Approx. 30 mm thick hardwood flooring Loading platform: - Telescopic loading platform with rear slope approx. 1,000 mm x 8° - Between the 1st and 2nd axle, a pair of fixed integrated wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Incl. 3-piece, removable, galvanized cover over the wheel recesses (W approx. 670 mm – max. point load 5 t / each) - 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) - 4 pairs of folding external lashing rings (LC 5,000 daN) - 3 pairs of folding external lashing rings (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN) Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: - 235/75 R17.5 3PMSF tyres, manufacturer of our choice - TPMS – Tire Pressure Monitoring System according to ECE R 141 - Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992 - The tractor unit must be capable of transmitting and displaying these data for correct indication. Axles: - BPW axles and suspension, 2 axles fixed, 3rd axle trailing steer Fpsdpfx Aew Tpq Decgog - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve. Axle tools Braking system: - WABCO braking system in accordance with EU regulations with EBS-E (2S2M), without connecting lines to the tractor Electrical system: - Electrical system in accordance with EU regulations - LED lighting 24 volts ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicators - ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel construction: - Steel construction made from high-strength fine-grained steel - Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Painting: - Entire steel structure automatically shot-blasted with shot-blast machine after welding - Second blasting with corundum for optimal coating adhesion - HRM-metallization of the entire vehicle chassis with ZINACOR 850 (85% Zinc / 15% Aluminum) to ensure best corrosion protection - Final coating with 2 layers of 2K top coat, single color RAL 3002 Carmine Red. Rear section metallized and painted in RAL 9010 (Pure White) - Metallic paint not possible - Paint system tested in salt spray test according to ISO 9227-NSS - Cavities sealed with special wax Including the following accessories: - On both the gooseneck and at the rear left and right, one holder for warning boards, including socket - Spare wheel holder in front of the bulkhead (without spare wheel) - 2" king pin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings at the galvanized connection panel at the front - Galvanized folding supports under the rear slope of the loading platform - Hardwood rear impact protection from gooseneck rear wall to loading platform - 1 pair of recessed lashing rings along the central frame at the rear in the slope (LC 10,000 daN) - On the gooseneck, aluminum side and rear walls

Stanje: novo, največja dovoljena obremenitev: 38.400 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website. Extract from the equipment list. Full equipment details available on request. Loading platform: * Extendable loading platform with pneumatically operated locking mechanism * Platform with approx. 30 mm thick wooden floorboards * 7 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the platform for attaching lashing straps (LC 2,000 daN) Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Fedpfxjw Tpr Ie Acgspg Tyres: * Tyres 385/65 R 22.5, brand of our choice * TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the truck is via the standardised EBS interface according to ISO 11992. For correct display, the truck must be capable of transmitting and displaying this data. Axle: * BPW axles and suspension * All axles hydro-mechanically force-steered * Disc brakes * Technical axle load: 10,000 kg each (ET 0) * Air suspension with raise/lower valve * Axle tools Brake system: * WABCO brake system according to EU regulations with EBS-E (2S2M), without connection lines to the tractor unit Steel construction: * Steel construction made from high-strength fine-grained steel * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical installation according to EU regulations * LED lighting, 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets, connections according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Complete steel construction automatically blasted after welding using a wheel blasting machine * Second blasting treatment with corundum for optimal adhesion of the coating system * Final coat with 2 layers of 2K topcoat, in a single colour RAL 3002 Carmine Red conforming to RAL system 841GL * Rims in silver grey * Rear end metallised and painted RAL 9010 (Pure White) * No metallic paint possible * Paint structure tested in salt spray test according to ISO 9227-NSS * Cavities sealed with special wax Accessories: * Remote steering from front and rear via cable remote control with push buttons, axle single-track control (without installation in the tractor unit) * Electro-hydraulic power pack * 4 wheel chocks with holders on the front bulkhead * 2-inch king pin * At the galvanised connection panel at the front, yellow-red air line couplings * At the gooseneck and rear left and right, one holder each for warning panels, including socket * 10 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the platform * One galvanised steel bulkhead (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container lock pockets in the platform, for 1 x 20' container, 2 x 20' containers or 1 x 40' container; the extension includes an additional locking point for a 45' container * 4 pairs of crosswise stanchion pocket bars in the platform, for plug-in stanchions approx. 100 x 50 mm * Storage for up to 9 pairs of plug-in stanchions bolted to the inside of the front bulkhead * Access ladder mounted front left and right in direction of travel * One INOX toolbox, approx. 1,200 x 460 x 550 mm, mounted at the front under the platform on the

Stanje: novo, največja dovoljena obremenitev: 25.645 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment list. Full equipment details available upon request. Fsdpfxexf Silo Acgepg Loading Platform: - Low-bed with central beam in extendable design, length approx. 6,750 mm - 5 pairs of lashing rings, foldable outwards (LC 5,000 daN) - 1 pair of lashing rings, foldable outwards (LC 10,000 daN) - 1 pair of flush-mount lashing rings at the rear of the loading platform (LC 10,000 daN) Gooseneck: - Gooseneck hydraulically lift/lowerable and detachable Rear Running Gear: - Rear running gear in short version with closed outer frame and tread plate cover - Running gear with excavator trough, trough rear half enclosed for housing air tanks - 2 pairs of lashing rings, foldable outwards (LC 5,000 daN) - 1 pair of lashing rings, foldable outwards (LC 10,000 daN) - 1 pair of flush-mount lashing rings at the rear of the running gear (LC 10,000 daN) Axles: - BPW axles, hydromechanically forced steering - Air suspension with lifting and lowering valve Tyres: - Tyres 245/70 R 17.5 3PMSF - TPMS: tyre pressure monitoring system as per ECE R 141 Brake System: - Wabco braking system in compliance with EU regulations with EBS-E (2S2M) Paintwork: - High-quality 2-component (2K) top coat, single colour RAL 3000 flame red Includes the following additional equipment: - 2 king pins - One galvanised steel front wall, approx. 400 mm high - Remote steering adjustment from front and rear via cable remote control with pushbuttons, including single-track axle alignment (without installation in the tractor unit) - Electro-hydraulic unit - Axle load gauge including axle load diagram - On the gooseneck, aluminium side boards and rear wall, plug-in type, approx. 2,440 x 400 mm (L x H). The rear galvanised plug-in stanchions are removable. (Upper body length approx. 2,560 mm) - Separate air connection with blow gun on the gooseneck - 2 work lights with switch on the trailer, mounted on left and right sides of the gooseneck platform - One INOX toolbox, approx. 1,350 x 400 x 400 mm, mounted on the gooseneck - 6 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the loading platform, 2 pairs in the rear frame of the running gear - Galvanised, extendable load width extensions approx. 230 mm per side - Hydraulic connections from the gooseneck to the low-bed with multi-coupling instead of screw couplings. No guarantee on seals. - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard grease NLGI-2 with removable pump protection - 2 pairs of WADER container pockets in the loading platform, for 1x 20’ container - One removable galvanised intermediate platform with 1 pair of WADER container pockets - 1 pair of steel ramps to bridge over the low-bed’s loading hooks - Loading platform with painted sand layer as anti-slip protection - HRM metallization (High Resistance Metallization)

Stanje: rabljeno, največja dovoljena obremenitev: 37.535 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2024, naslednji pregled (TÜV): 08/2026, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Excerpt from the equipment list. Full equipment details available upon request. Loading Platform: * Extendable loading platform with pneumatically actuated locking mechanism * 7 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * Cutouts in the outer frame of the loading platform for attaching lashing straps (LC 2,000 daN) Fodexgk U Nspfx Acgjpg Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles, air-suspended, with disc brakes (approx. 430 mm), with lift/lower function. Technical axle load: 10,000 kg each (ET0) * Follow-up steering axle with electro-magnetic reverse lock, activated via reverse gear or manually * Axle tool Tyres: * Tyres 385/65 R 22.5 Braking System: * Braking system compliant with EU regulations with EBS-E (2S2M) without interconnecting lines to the tractor unit Steel Structure: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Paintwork: * Premium and long-lasting corrosion protection for the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer * High-quality 2-component (2K) single-colour top coat finish in RAL 3002 carmine red * Silver rims * Rear section metallised and painted in RAL 9010 (pure white) Including the following additional equipment: * Yellow-red air couplings at the galvanised front connection panel * 4 wheel chocks with holders * 2-inch kingpin * Yellow reflector tape according to EU regulations, at the sides, on the extension, and rear of trailer * European reflector plates (red-yellow) at the rear of the trailer * Loading platform equipped with approx. 30 mm thick wooden floor, enclosed in omega profiles * 10 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the loading area * Storage for up to 9 pairs of plug-in stakes approx. 100 x 50 mm, bolted to the inside of the front wall * 1 spare wheel holder under the loading platform, left side in the direction of travel, without spare wheel * 1 mudflap at the rear of the trailer * Manual and description on USB stick * One bracket for a warning beacon at the rear of the trailer * On the gooseneck and rear panel, each left and right, a bracket for warning boards including socket * 80 km/h speed label at rear and on both sides * Load manometer for axle load determination including load diagram * Galvanised steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container locks in the loading floor, for 1x 20' container, 2x 20' containers or 1x 40' container flush with the rear * Stainless steel toolbox, approx. 600 x 350 x 600 mm, under the loading platform, left side in direction of travel * 4 pairs of stake pocket rails mounted lengthwise on the loading platform, for plug-in stakes 80 x 50 mm * Lift axle on the front axle, controlled by TEBS E depending on current axle load and loading status * 2 LED reverse lights mounted on the rear panel * HRM metallisation (High Resistance Metallisation)

Stanje: novo, največja dovoljena obremenitev: 33.865 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, Our complete vehicle inventory with immediately and soon available vehicles can be found on our website. Excerpt from the equipment. Full specification available upon request. Gooseneck * Gooseneck with chamfered front corners approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood floor approx. 30 mm thick Loading Area * Double extendable design with rear bevel approx. 500 mm x 8° * 6 pairs of folding external lashing rings (LC 5,000 daN) * 4 pairs of folding external lashing rings (LC 10,000 daN) * 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) * 1 intermediate table approx. 250 mm * Hardwood floor approx. 48 mm thick, chequered plate overlay above axles * Cut-outs in the loading area outer frame for attaching tension belts (LC 2,000 daN) Axles * BPW axles and suspension, all axles hydro-mechanically steered * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Axle tools Tyres: * 245/70 R 17.5, load index (146/146 F) * Make of our choice Landing legs: * JOST mechanical landing legs with 2-speed gearbox, lifting capacity approx. 24 t (approx. 50 t tested capacity) Brake system: * Brake system according to EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit Paint finish: First class and durable corrosion protection * High-quality two-component (2K) single-colour top coat in RAL 3002 carmine red. * Rear section metallised and painted in RAL 9010 (pure white) Steel construction: Steel structure made of high-strength fine-grained steels. * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Fpsdpfx Aew Tprzjcgeg Electrical system: * Electrical system according to EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets, connection as per ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Including the following additional equipment: * 2-inch kingpin * Hot-dip galvanised steel bulkhead, approx. 400 mm high * Yellow-red air couplings on the galvanised front terminal strip * Spare wheel carrier in front of the bulkhead * Electro-hydraulic power unit * Remote steering front and rear via cable remote control with push buttons, includes axle tracking control (without installation in tractor unit) * Recess at the rear of the gooseneck for aluminium approach ramps * Anchor rail for aluminium approach ramps at the rear of the vehicle * Galvanised folding supports under the loading area rear chamfer * Aluminium drop sides and rear board on the gooseneck, plug-in, approx. 2,440 x 400 mm (L x H) * Rear galvanised plug-in stanchions are removable (body length approx. 2,560 mm) * One galvanised toolbox integrated in the chamfered gooseneck * 4 pairs of WADER container locks in the loading area for a 20', 2x 20', 40' or 45' container * 8 pairs of stake pockets for plug-in stanchions approx. 100 x 50 mm in the loading area outer frame * Galvanised extensions, extendable by approx. 230 mm per side * Sliding anchor rails for aluminium approach ramps at the rear of the vehicle * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * Central lubrication system with 2 BEKAMAX (Pico) pumps, using standard NLGI-2 grease and removable pump protection * 2 LED reversing lights mounted on the rear panel * HRM metallisation (High Resistance Metallisation), complete steel structure shot-peened to SA2.5–SA3, then wit

Stanje: novo, največja dovoljena obremenitev: 37.680 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our entire range of vehicles, including immediately and short-term available units, on our website. Excerpt from the specification. Full specification available on request. Gooseneck * With approx. 30 mm thick hardwood flooring; gooseneck in straight design at the rear * 3 pairs of lashing rings (LC 5,000 daN) Loading Platform * Extendable version * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) * Cut-outs in the outer frame of the loading deck for attaching tension belts (LC 2,000 daN) * Approx. 48 mm thick hardwood flooring, checker plate covering above the axles Landing Legs * JOST mechanical landing legs with 2-speed gearbox for lifting capacity approx. 24 t (test load approx. 50 t) Tyres * 205/65 R 17.5 Axles * BPW axles and suspension * 1st axle rigid, remaining axles hydro-mechanically forced-steered * Air suspension with lift and lower valve Brake System * In accordance with EU regulations, with EBS-E (4S3M), no interconnection lines to the tractor unit Steel Construction * Made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Fpedpfx Aev Etx Eocgeg Paintwork * Premium and durable corrosion protection of the standard shot-blasted welded frame, ensured by a two-component (2K) zinc-rich primer * High-quality two-component (2K) topcoat, single-colour RAL 3002 carmine red * Wheels painted silver Included Accessories * 2-inch king pin * Galvanized steel front wall, approx. 400 mm high * Yellow-red air couplings on the galvanised front connection strip * 4 chocks with holders mounted on the front wall * Spare wheel holder in front of front wall * Electro-hydraulic unit * Remote rear- and front axle steering via cable remote control with push buttons, includes single-track monitoring for axles (no installation in the tractor unit required) * European reflector boards (red-yellow) at rear of trailer * Yellow reflective tape complying with EU regulations on the sides, extension and rear * On gooseneck and rear plate—left and right—each with holder for warning boards including connector * Mount for rotating beacon at the rear of the trailer * Galvanized folding supports below the bevel of the loading platform * Axle load pressure gauge including axle-load diagram * 7 pairs of WADER container pockets for: 1x 20' or 1x 40' container on the platform, 1x 40' container above the gooseneck, or 2x 20' containers * Support bracket with 1 pair of WADER container pockets, kingpin load approx. 20,000 kg * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm at the outer frame of the load platform * Galvanized extensions, extendable by approx. 230 mm per side * Movable hook-in rails for aluminium drive-on ramps at the rear of the vehicle * 1 pair of recessed lashing rings along the central beam at the rear of the load platform (LC 10,000 daN) * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable guard for the pump * 2 LED reversing lights mounted at the rear * Acoustic reverse warning signal * HRM metallisation (High Resistance Metallisation)

Stanje: novo, največja dovoljena obremenitev: 37.820 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment. Complete specification available on request. Gooseneck: - Gooseneck with front corners beveled approx. 45° and rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring approx. 30 mm thick Loading Platform: - 1 pair of fixed wheel recesses in front of the axles, approx. 2,610 x 970 x 400 mm (L x W x D) - Wheel recesses with square climbing stripes approx. 15 x 15 mm, including widenings at the bottom - Between the 1st and 2nd axles, one fixed pair of wheel recesses approx. 1,610 x 700 x 400 mm (L x W x D) - Incl. 3-part removable galvanized covers over the wheel recesses (W approx. 670 mm), max. point load approx. 5 t/piece - Recess in the bevel and extending into the loading platform for accommodating excavator stick (approx. 2,900 x 750 x 210/290 mm (L x W x H)) - 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) - 5 pairs of folding-out lashing rings (LC 5,000 daN) - 3 pairs of folding-out lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) - Cut-outs in the outer frame of the platform for attaching tension belts (LC 2,000 daN) One-Piece Steel Ramps: - 1 pair of galvanized one-piece steel ramps, approx. 3,000 x 800 mm, with approx. 48 mm thick hardwood covering - Ramp with hydraulic lifting system, hydraulically adjustable - Maximum load per pair: 40,000 kg - In accordance with Regulation 1230/2012/EU, ramps shorter than 300 mm do not need to be considered in the vehicle length in transport position Landing Gear: - JOST landing gears (mechanical) with 2-speed gearbox for approx. 24 t lift capacity (approx. 50 t test load) Axles: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load per axle: 12,000 kg - Electro-magnetic reverse lockout, activated via reverse gear and manually - Air suspension with raise/lower valve - Axle tool Tyres: - Tyres 235/75 R 17.5 3PMSF, brand of our choice - TPMS tyre monitoring system as per ECE R 141. Data transmission to the tractor unit via the standardized EBS interface according to ISO 11992. To display correctly, the tractor unit must be able to receive and show this data. Brake System: - WABCO brake system in compliance with EU regulations, with EBS-E (2S2M) without connecting lines to the tractor unit Steel Construction: - Steel structure made from high-tensile fine-grained steels - Steel grades: S355J2+N/S355MC (yield strength 355MPa); S690QL/S700MC (yield strength 690MPa) Fedpfow Tpqwox Acgepg Electrical System: - Electrical system in accordance with EU regulations - 24 Volt lighting ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX at the front terminal bar with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: - Complete steel structure automatically shot blasted with a turbine blasting system after welding - Second blasting process with corundum for optimum coating adhesion - HRM metallization of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) for optimal corrosion protection - Final paint with two layers of 2K topcoat, single color in RAL 3002 Carmine Red, according to the RAL 841GL system - Rims in silver - Rear section metallized and in RAL 9010 (con...

Stanje: novo, največja dovoljena obremenitev: 39.720 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete range of vehicles, including immediately and short-term available units, can be found on our website. Excerpt from the equipment list. Full specification available on request. Gooseneck * With beveled front corners, approx. 45°, and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area * Extendable loading area version * 5 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of lashing rings laid flat at the front of the loading area (LC 10,000 daN) * Cut-outs in the outer frame of the loading area for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate covering above the axles Landing legs * JOST (mechanical) with two-speed gearbox, lifting capacity approx. 24 t (test load approx. 50 t) Axles * BPW axles, two fixed, two self-steering, with drum brakes Fjdpfx Aju Sd U Ujcgjpg * Air suspension with raise/lower function * Self-steering axle with electromagnetic reverse lock, activated by reverse gear or manually * Tyres: 205/65 R 17.5 Braking system * Wabco braking system meeting EU regulations with EBS-E (4S3M), without interconnection lines to the tractor unit Steel Construction * Made from high-tensile fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Paintwork * First-class, long-lasting corrosion protection for the standard shot-blasted welded frame, ensured by a two-component (2K) zinc dust primer * High-grade, single-color two-component (2K) topcoat in RAL 3002 Carmine Red * Rear section metallized and finished in RAL 9010 (Pure White) * Wheels in silver Accessories included * 2-inch kingpin * Galvanized steel front wall, approx. 400 mm high * Spare wheel holder in front of the front wall * Yellow-red air couplings on galvanized front connection rail * 4 wheel chocks with holder on the front wall * Rear section of the gooseneck with mounting for aluminium ramps * Galvanized folding supports under the rear bevel of the loading area * Bracket for a beacon on the trailer’s rear * Yellow reflective tape on the sides, extension, and rear, in compliance with EU regulations * Holders for warning signs with socket on left and right of gooseneck and rear panel * TPMS tire pressure monitoring system according to ECE R 141. Data transfer to the towing vehicle is via the standardized EBS interface per ISO 11992; for correct display the towing vehicle must be able to receive and display the data * On the gooseneck: clip-on aluminium side and rear panels, approx. 2,440 x 400 mm (L x H); rear galvanized stakes are removable (body length approx. 2,560 mm) * One galvanized toolbox integrated into the beveled gooseneck * 6 pairs of WADER container pockets in loading area, for 1 x 20' container, 2 x 20' containers, or 1 x 40' container * Sliding brackets for aluminium ramps at the vehicle’s rear * 7 pairs of stake pockets for removable stakes, approx. 100 x 50 mm in the outer frame of the loading area * One galvanized transverse holder under the loading area * Galvanized, extendable outriggers for widening by approx. 230 mm per side * Lift axle on the front axle controlled by TEBS E depending on current axle load and loading condition * 5 pairs of recessed lashing rings along the central beam (LC 5,000 daN)

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 05/2008, * Izvlečno * Sledilna krmiljena os * Hidravlične nakladalne rampe * Zračno vzmetenje -----Interna številka vozila: 11555----Pridržujemo si pravico do napak in vmesne prodaje WhatsApp podpora na voljo! Za vprašanja o vozilu ali dodatne informacije nam pišite preko WhatsAppa Fsdpfx Aox I Uyhocgopg WhatsApp Nemško, Angleško -- WhatsApp Nemško, Angleško, Arabsko

Leto izdelave: 2024, obratovalne ure: 865 h, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 99404000000, Complete Pre-Treatment Plant for Commercial Waste // GewAbfV Compliant For sale: a complete pre-treatment plant for commercial waste in accordance with the German Commercial Waste Ordinance (GewAbfV) by Doppstadt MMAK – Modular Processing Plant + Conveyor Belt + Accessory Package – Mobile & Efficient All-in-one package for mobile, scalable waste processing Ideal for waste management companies, composting facilities, biomass yards, or construction sector Description: Fgebjw Hdwyskt E I Scof Available for sale is a fully mobile and modular processing system (MMAK) from Doppstadt Umwelttechnik GmbH, including an extensive accessory package. The system is perfectly suited for the pre-treatment of commercial waste, mixed construction waste as well as for removing contaminants from organic waste streams. Highlights: • Flexibly combinable components (e.g., Selector 400, air separator, sorting belts) • Compliant with the Commercial Waste Ordinance (GewAbfV) • High separation efficiency for metals, plastics, paper, wood, cardboard Fedpfx Ajw Iy Trocgjpg • Mobile, CE-compliant, controllable via emergency-stop linkage • Available with diesel or electro-hydraulic drive Including DMB 8500 FLEX conveyor belts: • Lengths: 5 / 6 / 8.5 m • Belt width: 1,200 mm • Suitable for continuous operation, low noise level (≤ 75 dB(A)) • Low maintenance, robust design Other main components: • Doppstadt METHOR: mobile single-shaft shredder, hook-lift chassis, highly versatile (e.g., commercial waste, organic waste, mattresses), rugged construction • Selector 400 with spiral shaft technology: efficient removal of contaminants from difficult-to-screen material streams, low operating costs • Mobile air separator (DMT-WS): reliably separates light contaminants (e.g., films, paper), continuously adjustable, 16.5 kW hydraulic drive • Sorting belt (auxiliary belt): for material dosing, manual post-sorting possible • Hydraulic power unit Hydrapack HP90: supplies power to attachments • Modular conveyor belt DMB 8500 FLEX: 8.5 m length, 1,200 mm belt width, suitable for continuous operation • Pallax Foam (PF1) foam spray system – TA Luft Advantages of the plant: • All modules CE-compliant, mobile, and usable individually • Emergency-stop linkage possible • Small footprint and low operating costs • Conforms to GewAbfV & TA Luft requirements • Quick setup, compact transport dimensions We are open to discussions – purchase, acquisition, hire purchase, or leasing are all possible. If seriously interested, we are happy to explain the system in detail in person. Price: Negotiable Location: Mecklenburg-Western Pomerania Contact: Mr. Tchorz Inspection upon request – available immediately!

Stanje: zelo dobro (rabljeno), konfiguracija osi: 2 osi, prva registracija: 09/2020, barva: rdeča, Leto izdelave: 2020, Oprema: ABS, Rear axle 1: Dual tires Rear axle 2: Dual tires; Steering axle Fpsdpfx Ajx Upxxocgog Unladen weight: 8,060 kg Loading platform height: 86 cm Extendable body: Yes Technical condition: Very good Visual condition: Very good Price: On request FAYMONVILLE F-S42-111A SEMI LOWBED TRAILER 2x SAF axles 1x steering axle (trailing) Tire size Extendable loading platform Length 680 cm + 420 cm extendable, total platform length 1,100 cm Platform width 254 cm Platform height approx. 86 cm Gooseneck length 330 cm Lashing eyes, stake pockets, twistlocks Follow us on Instagram: GEURTSTRUCKS Lowbed trailer built in 2016, but sold as new in 2020 We speak German Hablamos Español We speak English

Stanje: rabljeno, lastna masa: 20.320 kg, največja dovoljena obremenitev: 46.180 kg, skupna masa: 66.500 kg, konfiguracija osi: 3 osi, prva registracija: 01/2004, velikost pnevmatike: -, Leto izdelave: 2004, ref: 2220 Extra-low semi low-loader trailer, 3 rear axles + 1 front axle (Dolly) Max. permitted total weight: 66 t Removable gooseneck trailer Extendable trailer (up to 5 m) Trailer with 3 forced-steering axles (with manual remote control) Trailer can be operated with or without Dolly Total trailer length: 16.43 m + 5 m (extendable) Unladen weight: 20,320 kg + 2,520 kg for Dolly Gooseneck length: 4.43 m Extra-low deck: Length 7.5 m + 5 m (extendable) Height: 0.5 m Trailer width: 2.74 m Deck above rear axles: Length 4.5 m Height: 1.05 m Excavator trough Removable hydraulic rear ramps and hydraulic ramp adjustment Trailer tyres: 285/70R19.5 Dolly tyres: 235/75R17.5 Serial numbers: YA9TL366B04113968 + 122B4113969 Fsdpewcrzrefx Acgepg

Stanje: rabljeno, barva: modra, Leto izdelave: 2016, Faymonville F-S43-1ABA. Baujahr: 2016. 10-Tonnen-SAF-Achsen. Zulässiges Gesamtgewicht: 42.000 kg. Sattellast: 18.000 kg. Servolenkung, 3 gelenkte Achsen. Luftfederung. Seilwinde. EBS, ABS, ALB. Hydraulik funktioniert über Duplo-Elektrik. Fodpfx Ajxvzm Uecgjpg Hydraulische Brücke vom Boden zum Schwanenhals. Länge: 3.000 mm. Zentralschmieranlage. 2-Punkt-Hydraulikabstützungen am Heck. 2-fach hydraulische Rampen: - hydraulisch links/rechts verschiebbar - Länge: 2.800 + 1.700 mm. Abmessungen: Schwanenhals: L: 3.800 mm. B: 2.480 mm. H: 1.400 mm. Sattellast: 1.150 mm. Ladefläche: L: 9.600 mm. B: 2.550 mm. H: 900 mm. Bereifung: 235/75R17,5, 70% Profil. Deutscher Anhänger! ID-Nr.: 449. Die Allgemeinen Geschäftsbedingungen der Firma Heinhuis gelten für alle Anzeigen, Angebote und Offerten von Heinhuis, für alle von Heinhuis abgeschlossenen Verträge sowie für sämtliche diesen vorausgehenden Verhandlungen. Mit jeder Form der Reaktion akzeptieren Sie die Gültigkeit der Allgemeinen Geschäftsbedingungen der Firma Heinhuis und erklären, dass Sie diese Allgemeinen Geschäftsbedingungen zur Kenntnis genommen haben. Unsere Preise verstehen sich als Netto-Exportpreise. = Weitere Informationen = Baujahr: 2016 zulässiges Gesamtgewicht: 42.000 kg = Firmeninformationen = Für weitere Informationen: WhatsApp:

Stanje: zelo dobro (rabljeno), prva registracija: 08/2010, barva: zelen, Leto izdelave: 2010, Oprema: ABS, = Additional Options and Equipment = - Central lubrication system = Further Information = Extendable body: Yes Technical condition: very good Visual condition: very good Price: On request KAMAG K22 MODULE 12 AXLES WITH GREINER LOWBED FOLLOW US ON INSTAGRAM, FACEBOOK, AND TIKTOK TO SEE VIDEOS OF OUR TRUCKS/COMMERCIAL VEHICLES AND MACHINERY FOR SALE. WIR SPRECHEN DEUTSCH WE SPEAK ENGLISH Fedpfxouxycuo Acgepg HABLAMOS ESPAÑOL

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 20.000 kg, največja dovoljena obremenitev: 120.000 kg, konfiguracija osi: 3 osi, stanje pnevmatik: 70 odstotek, barva: rdeča, Leto izdelave: 2006, 3 dvižne in krmilne osi. Hidravlično vzmetenje. Višinsko nastavljiv vrat. Fpedpoyaaz Hefx Acgog Pomožni bencinski motor Hartz. Neodvisno brezžično krmiljenje. Hidravlične zadnje rampe za strojno obremenitev do 70 ton.