Wörmann Tieflader Anhänger Mit Rampen nakup rabljenega (12.741)

Stanje: novo, prevoženi kilometri: 100 km, moč: 375 kW (509,86 KM), vrsta goriva: dizel, skupna masa: 32.000 kg, konfiguracija osi: 3 osi, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, dolžina tovornega prostora: 9.000 mm, širina tovornega prostora: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, klimatska naprava, navigacijski sistem, parkirni grelec, 4-axle Volvo machine transporter / work platform transporter ▪ FH 500 8x2R ▪ Trailing axle, electro-hydraulically steered, single tires ▪ Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle ▪ High-roof long-distance safety cab FH ▪ Cab auxiliary heater, 2 kW ▪ 33 l cool box with freezer compartment, under bunk ▪ Air suspension on front axle(s) ▪ Transmission / I-Shift control via operator panel on driver's seat ▪ I-Shift driving modes: Standard, Performance, and Economy ▪ I-See with map-based topography and traffic information ▪ Eco cruise control (cruise control), including brake cruise control ▪ Manual shifting possible in automatic mode (incl. kickdown), adaptive traction control ▪ Adaptive cruise control (ACC) with collision warning and emergency braking function ▪ Lane keeping assist ▪ Side collision avoidance and turn assist (both sides) ▪ Driver alert system for drowsiness warnings * VEB Volvo Engine Brake * etc. WIESE body for work platform and construction machinery transport with hydraulic loading ramps with 2 pairs of wheel recesses including covers Body dimensions: - Length approx. 9,050 mm usable length - External width 2,550 mm - Loading height on upper edge floor approx. 1,050 mm unladen - Robust, weight-optimized steel welded structure, box-type construction - Short crossmember spacings for high point loads - Rear end beveled for low approach angle - External frame profile 90° - Bulkhead in reinforced version - Internal bottom tool box in front of bulkhead - Grating floor - Suitable for wheel loads of up to 5,000 daN - Above the axles: steel plate tool boxes and outer frame with anti-slip coating Load securing: - 9 pairs of heavy-duty lashing rings, 8 t, recessed into external frame - Longitudinal members with Multi-X profile along the entire length with numerous lashing points, 2.5 t - 4 lashing eyes 8 t recessed at the rear (left/right/center/center) - 4 lashing eyes 8 t recessed at the front bulkhead (left/right/center/center) - External frame profile 90° Ramps: Type: WFB 20 S-2 Load capacity: 18,000 kg per pair Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm) Platform width approx.: 850 mm per ramp - Ramp design: 2 individual/stretch ramps, both laterally adjustable - Ramps can be used as drive-up ramps or bridging ramps for warehouse technology (stretch section remains closed), fixed ramp section placed on dock ramp - Sturdy tension bar as transport safety (alternatively with strap tensioning) - 2 hydraulic rear supports with footplates, warning buzzer and indicator light in cab - Ramp and support operation via electro-hydraulic system Ljdpfjw Itl Uex Aicoac - Control by radio remote or manual emergency controls on switch block - Switch block mounted in stainless steel toolbox on the frame side - Superwinch 8.2 t with approx. 20 m steel cable - Access steps with grab rail on right and left for walking onto loading area - 5 stainless steel drawer-type tool boxes, with optional lighting available at extra cost - Side skirting as shown in sample images (green vehicle), available as an option at extra cost - KTL coating for the superstructure - Spherical trailer hitch at rear, 3.3 t - 4 LED work lights - 2 LED reversing lights mounted high on bulkhead - 4 LED work lights externally mounted on the frame for area illumination - 2 LED work lights at the rear - 1 removable rotating beacon at the rear Stock vehicle is supplied with cab color in white and body in nova grey (exterior frame painted in RAL color of y

Stanje: novo, največja dovoljena obremenitev: 36.937 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, Kässbohrer Lowbed Trailer with Hydraulic Gooseneck Available Immediately! TECHNICAL SPECIFICATIONS: * Fifth wheel height: 1,250 mm * Overall length: 13,190 mm * Gooseneck length: 3,950 mm * Platform length: 9,240 mm * Platform height: 875 mm * Wheelbase: 8,480 mm * Axle spacing: 1,360 mm * Axle load: 30,000 kg * BPW axles with air suspension and drum brakes, 10 t load capacity * Unladen weight: 11,063 kg * Overall width: 2,550 mm * Permissible total weight (60 km/h): 52,800 kg * Permissible total weight (80 km/h): 48,000 kg CHASSIS: * 2x rigid front axles, 1x trailing steering axle at rear * Load-dependent manual axle lift system on the 1st axle * Tyres: 12x 245/70R17.5 * Air suspension, 1x load gauge FRAME: Made of high-quality, high-strength S700 MC steel * Gooseneck with 90° vertical corners * Jost landing legs at the front * Folding support legs at the rear * Grating floor Laodpfxowmh H Eo Aicoc RAMP: * Loading ramp capacity: 40 t * 2x hydraulic ramps, suitable for hydraulic sliding/folding operation, galvanized steel surface, 4,200 mm long and 850 mm wide, 9° ramp angle, 40,000 kg capacity and 3,510 mm height in closed position * Hydraulic gooseneck ramp, 2,800 mm long, 10° angle LOAD SECURING: * Lashing rings: 6x2 on gooseneck (6 t capacity), 6x2 on platform (6 t capacity), 8x2 on the outer frame (6 t capacity) * 8x2 stake pockets MISCELLANEOUS: * 1x rotating beacon * 1x work light * 2x2 wide load signs with lighting * SmartBoard Feel free to contact us for further information.

Stanje: novo, največja dovoljena obremenitev: 36.937 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, Kässbohrer Low Loader with Hydraulic Gooseneck Available Immediately! TECHNICAL DATA: * Saddle height: 1,250 mm * Overall length: 13,190 mm * Gooseneck length: 3,950 mm * Platform length: 9,240 mm * Platform height: 875 mm * Wheelbase: 8,480 mm * Axle spacing: 1,360 mm * Axle load: 30,000 kg * BPW axles with air suspension and drum brakes, 10-ton load capacity * Unladen weight: 11,063 kg * Overall width: 2,550 mm * Permissible gross weight (60 km/h): 52,800 kg * Permissible gross weight (80 km/h): 48,000 kg Ljdew Ii A Aopfx Aiceac CHASSIS: * 2x fixed front axles, 1x trailing steering axle at the rear * Overload-dependent manual axle lift system on the 1st axle * Tyres: 12x 245/70R17.5 * Air suspension, 1x load pressure gauge FRAME: Made from high-quality and high-strength S700 MC steel * Gooseneck with 90° vertical corners * Jost landing legs at the front * Foldable supports at the rear * Grated floor RAMP: * Ramp capacity: 40 tonnes * 2x hydraulic ramps, suitable for hydraulic sliding/folding operation with galvanized steel surface, 4,200 mm length and 850 mm width, 9° ramp angle, load capacity 40,000 kg and 3,510 mm height when closed * Hydraulic gooseneck ramp, 2,800 mm long, 10° angle LOAD SECURING: * Lashing rings: 6x2 on gooseneck with 6-ton capacity, 6x2 on platform with 6-ton capacity, 8x2 on the outer frame with 6-ton capacity * 8x2 stake pockets OTHER FEATURES: * 1x rotating beacon * 1x work light * 2x2 oversize signs with lighting * SmartBoard For further information, we are happy to assist you.

Stanje: novo, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, skupna širina: 2.540 mm, Leto izdelave: 2026, Oprema: ABS, WIESE Platform Trailer DS 18 PT-TL (Container / Twistlocks) * Vehicle type: Platform trailer / Container trailer * Manufacturer: WIESE * Model: DS 18 PT-TL – Container version ---Technical Data Lodpfx Aisy Euffscsac * Axle load: 16,000 kg (2 x 8,000 kg) * Axles: 2 SAF axles * Tyres: 235/75 R17.5, twin tyres * Air suspension: yes * Ride height: approx. 890 mm unladen * Coupling height: approx. 700 mm * Width: approx. 2,540 mm ---Chassis / Superstructure * Platform trailer with twistlocks for container transport * Multiple container locks (fixed + extendable) * 6 pairs of lashing rings on the outer frame * Additional lashing points under the cross members * Reinforced outer frame with lashing holes * 27 mm birch plywood anti-slip floor * Galvanised omega profiles * Cross member spacing max. 400 mm ---Brake / Safety * EBS brake system (Knorr or Wabco) * ABS / Roll Stability Program * Dual-circuit air brake system * Basic tyre pressure monitoring * 2 air tanks (each approx. 80 L) ---Features * Complete LED lighting system * Side LED marker lights (flashing) * 15-pin electrical system * Rear underrun protection * Side impact protection * Plastic mudguards (180°) * Mud flaps with "WIESE" logo * Rear folding and extendable access ladder * Rear impact buffers ---Towing Equipment * 18t drawbar (fixed and extendable) * 40 mm drawbar eye * Turntable with slewing ring * Height adjustment available ---Miscellaneous * TÜV certificate available * Galvanised chassis * High-quality steel construction * Made in Germany For further information, please feel free to contact us.

Stanje: novo, moč: 340 kW (462,27 KM), skupna masa: 32.000 kg, vrsta goriva: dizel, barva: bela, konfiguracija osi: 3 osi, vrsta prenosa: samodejen, širina tovornega prostora: 2.550 mm, dolžina tovornega prostora: 8.900 mm, višina nakladalnega prostora: 2.915 mm, Leto izdelave: 2026, skupna širina: 2.550 mm, skupna višina: 3.520 mm, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, Construction Specification: Volvo FH 8x2R NLA Air Suspension Application / Chassis - Regional transport on good roads, max. 10% soiled - Ambient temperature: –25°C to +40°C - Gross train weight (technical): 44 t - Chassis height: MED (medium) Ljdsyvmvkspfx Aicoac - Wheelbase: 6,000 mm - Frame: profile height 300 mm, thickness 8 mm, double frame to end - Axle configuration: 8x2R, 1 drive axle, 1 electro-hydraulically steered trailing axle - Air suspension on front and rear axles, front axle lift (“Basic”) - Technical axle loads: front axle up to 16 t, rear axle up to 19 t, trailing axle 7.5 t, axle load limiter 11.5 t - Dual-circuit power steering with variable assist pump - Disc brakes, EBS Medium, ESP, spring-loaded parking brake - LED taillights, stationary trailer brake Engine / Transmission - Diesel engine, 12.8 l, 510 HP / 375 kW, 2,550 Nm, Euro 6 with SCR, DPF, EGR - Volvo Engine Brake+ (VEB+), ADR-compliant engine brake - I-Shift AT2612, automated 12-speed transmission (direct-drive), 2,652 Nm input torque - Drive modes: Standard, Performance, Economy - Manual shifting in automatic mode incl. kickdown - Eco Cruise Control including downhill brake cruise - I-See with map-based topography and traffic info - PTO PTR–DH (high-speed), gear-driven, DIN flange, up to 600 Nm Tanks / Air / Electrics - Fuel tank 505 l, aluminum, right side - AdBlue tank approx. 57 l between front axles, lockable - Air compressor 2-cylinder, approx. 1,100 l/min - Alternator 180 A - AGM batteries 2 x 210 Ah, battery indicator in display, master switch with remote control - 2 folding wheel chocks Tyres - Steel rims - FA: 355/50 R22.5 Bridgestone Ecopia H-Steer 002 (Class B) - RA: 295/60 R22.5 Bridgestone Ecopia Drive Enliten, 3PMSF, Long Haul (Class B) - TA: 355/50 R22.5 Bridgestone Ecopia H-Steer 002 (Class B) - Tire pressure monitoring system with internal sensors Cab FH / Comfort - Safety long-haul cab FH, max overall height 4.0 m - Driver comfort package, living package FH with single bunk - Comfort driver’s seat, air-suspended, heated and ventilated, seatbelt integrated - Comfort rest seat, rotatable and tiltable, robust leather, armrests driver/passenger - Automatic climate control, 2 kW auxiliary heater, enhanced insulation - Lower bed 2000 x 815/740/660 mm, pocket spring core + premium topper - 33 l fridge with freezer compartment, top/rear storage compartments Assistance / Info - 12" digital cockpit with traffic sign recognition - 9" touch display, AM/FM + DAB/DAB+ radio, 8 speakers - ACC with collision warning and emergency braking function - Lane departure warning, side collision and turn assist, driver alert system (all can be deactivated) - Reversing camera, prewired for additional cameras Included in delivery: WIESE body for platform and construction machinery transport with hydraulic loading ramps 2 pairs of wheel recesses incl. covers Body dimensions: - Length approx. 8,900 mm (usable length) - External width 2,550 mm - Loading height top of floor approx. 1,050 mm (unladen) - Sturdy, weight-optimized steel welded frame, box construction - Short crossmember spacing for high point loads - Rear beveled for low ramp angle - External frame profile 90°, reinforced front wall - Internal storage box ahead of front wall - Grating floor - Designed for 5,000 daN wheel load - Steel toolboxes and outer frame above axles with anti-slip coating Load securing: - 9 pairs of heavy-duty lashing rings, 8 t, recessed in outer frame - Longitudinal members with Multi-X contour

Stanje: rabljeno, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2010, naslednji pregled (TÜV): 11/2025, * SAF osi * Kolesne poglobitve * 4 osi * Hidravlične nakladalne rampe * Vlečna zanka 50 mm * Lastna teža: 9.650 kg Lodpjvav U Ssfx Aicsac * Skupna dovoljena teža: 24.000 kg * TÜV: 11.2025 * Tehnični pregled: 05.2025 -----Interna številka vozila: 10093----Pridržujemo si pravico do napak in vmesne prodaje. Podpora prek WhatsApp-a na voljo! Za vprašanja o vozilu ali dodatne informacije nam pišite prek WhatsApp-a. Whatsapp Whatsapp

Stanje: rabljeno, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2016, naslednji pregled (TÜV): 11/2025, * SAF osi * Kolesne poglobitve * 4 osi * Hidravlične nakladalne rampe * Vlečni obroč 50 mm * Lastna teža: 9.460 kg * Skupna dovoljena teža: 24.000 kg * TÜV: 11.2025 * Tehnični pregled: 05.2025 -----Interna številka vozila: 10091-----Pridržujemo si pravico do napak in vmesne prodaje. Laedpfxsvawacs Aicoc Podpora prek WhatsApp na voljo! Za vprašanja o vozilu ali dodatne informacije nam pišite prek WhatsApp. Whatsapp Whatsapp

Stanje: novo, največja dovoljena obremenitev: 13.600 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2026, * KA-TA-RT 18.0: ----Brake: * EBS (Electronic Braking System) * Emergency release for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with lifting and lowering device, including Ride-Through-Release (RtR) valve and manual lowering function for loading ----Drawbar / Flanged Drawbar Eye: * Drawbar with positive-locking height adjustment * 50 mm flanged drawbar eye ----Electrics / Lighting: * 15-pin 24 V connector * LED tail lights 12 / 24 V fitted in underrun protection Lsdpfx Aovin Ucjicsac ----General Attachments: * Support winch at front * Fold-away rear support legs on the outside * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on right side * Plastic quarter mudguards ----Tipping Body: * Steel pallet – 3-way tipper body made of high-tensile fine grain steel with high M-Strong side panels and reinforced 180 bar tipping cylinder * Fixed front wall made of smooth sheet steel * Hardwood strip for excavator bucket screwed onto front wall * Continuous side panels – fold-down without center pillar, with sideboard spring-assist lifters and swinging function via manual central locking * Bolt-on rear stanchions * Combination steel swing doors at rear, 2-leaf, asymmetrically split, able to swing open 270° and lockable (not foldable), including additional swinging frame for automatic rear door opening when tipping; locking by galvanized rotating bar lock and central locking, deactivation function for automatic rear door opening when tipping backwards with opened swing doors * 4 mm steel floor plate * Two-step access on the left front * Rear ramp track for loading ramps ----Load Securing: * One 7 t lashing ring in each corner * Four 3 t lashing eyes recessed in the outer frame on each side ----Loading Ramps: * Recessed ramp compartment at rear of chassis * 1 pair aluminium loading ramps (10 t/pair), approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles ----Paintwork: * Chassis, drawbar, rear stanchions, front wall, tipping platform, underrun protection, and rear supports hot-dip galvanized * Sideboards painted in any desired RAL colour (excluding special or metallic paints), can be changed up to approx. 6 weeks before completion * Axles, air tanks, flanged drawbar eye, and front support winch painted in black ----Info: * --Load securing certificate according to EN 12642 XL? * Errors and intermediate sale reserved ----Delivery Time: * Available from approx. CW 45 / 2026

Stanje: novo, največja dovoljena obremenitev: 13.600 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2026, * KA-TA-RT 18.0: ----Braking System: * EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Suspension: * Air suspension with lifting and lowering system, including RtR valve and manual lowering for loading operations ----Drawbar / Flange Drawbar Eye: * Drawbar with positive-locking height adjustment * 50 mm flange drawbar eye ----Electrics / Lighting: * 15-pin 24 V connector * LED tail lights 12 / 24 V integrated in underrun protection ----General Attachments: * Landing gear at the front * Fold-out support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Plastic quarter mudguards Lasdpfx Aievin T Secoc ----Tipper Body: * Steel 3-way tipper body made of fine-grain steel with high M-Strong side walls and reinforced 180 bar tipping cylinder * Fixed front wall, smooth sheet steel * Hardwood pad for excavator bucket bolted to front wall * Continuous, folding drop sides without central stanchion, with sideboard spring assist and manual central locking system * Screwed-in rear stanchions * Combination steel swing doors, asymmetrical 2-leaf rear wall, can be swung and locked at 270°, not foldable, with additional swinging frame for automatic rear wall opening during tipping, locking via galvanized rotary bar lock and central locking system, deactivation function for automatic rear wall opening when tipping reverse with open swing doors * 4 mm steel floor plate * Two-step entry left front * Rear mounting rail for loading ramps ----Load Securing: * 1 x 7 t lashing ring in each corner * 4 x 3 t lashing rings recessed into the outer frame on each side ----Loading Ramps: * Integrally mounted ramp storage at the rear of the chassis * 1 pair of aluminum loading ramps (10 t / pair) approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles ----Paintwork: * Chassis, drawbar, rear stanchions, front wall, tipping platform, underrun protection, rear folding supports hot-dip galvanized * Sideboard paintwork in RAL custom color (with exceptions for special or metallic paintwork); can be changed up to approx. 6 weeks prior to delivery * Axles, air tanks, flange drawbar eye, front landing gear painted in black ----Information: * --Load securing certificate according to EN 12642 XL? * Subject to errors and prior sale ----Delivery Time: * Available from approx. CW 45 / 2026

Stanje: novo, največja dovoljena obremenitev: 6.870 kg, skupna masa: 9.900 kg, konfiguracija osi: 1 os, Leto izdelave: 2026, * KWH 9.9 ML: ----Brakes: * EBS braking system * Drum brakes * Emergency release device for spring-loaded cylinders ----Axle: * BPW axle ----Suspension: * Parabolic springs ----Drawbar / Coupling Eye: Lsdpfx Aou I Iqxsicjac * Drawbar with 40 mm bolted towing eye (height-adjustable) ----Electrics / Lighting: * 15-pin power connector * LED lighting * Flashing LED side marker lights * RDÜ tire pressure monitoring system ----General Attachments: * Support winch at the front * Spring-assisted square tube supports at the rear with base plate, safety lock pin for various support heights * Enclosed steel mudguards with spray protection * Enclosed side underrun protection usable as advertising panel * Plastic toolbox with floor insert (installed horizontally), approx. 500 x 350 x 400 mm ----Body: * Swiveling cable drum body, clear width between drum arms 1,700 mm, with tension lock for securing drums at the support arm ends, as well as a central claw lock to secure the cable drum body to the chassis * Motor-hydraulic drum drive with hydraulic motor * Valves and adjustable, rubber-coated drive rollers * Hydraulic speed regulator and brake for drum drive * Steel drum shaft with 76 mm diameter including centering and rotating ends * 1 pair of polyamide centering cones, stepwise offset ----Chassis: * Chassis made of torsion-resistant square tubes and cross beams ----Pump Unit: * Hydraulic pump unit with diesel engine * Fuel tank and hand starter * 6.5 HP with gear pump (150 bar) ----Tires: * 315/80 R 22.5 ----Unladen Weight: * 2,690 kg unladen weight ----Paintwork: * Vehicle hot-dip galvanized ----Information: * New vehicle with full manufacturer's warranty * Errors and prior sale reserved ----Delivery Time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 17.650 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.230 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TP 30.0 with 3 cable drum supports ----Braking system: * Wabco TEBS (electronic brake system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11-tonne Gigant axles ----Suspension: * 17.5" air suspension with lift and lowering device ----Drawbar: * 1,800 mm long drawbar with 40 mm towing eye ----Electrics / Lighting: * Tyre pressure monitoring with display option in the truck display via EBS signal (no truck-side installation required) * 15-pin power connector * 2 additional LED reversing spotlights (switched via reverse gear) * LED lighting ----General fittings: * Aluminium air tank * Stainless steel toolbox on the side, approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Platform: * Zurr-fix outer frame bent at 45°, hole pattern for lashing equipment, lashing force per lashing point 2,000 kg at a spacing of 480 mm * Installation of 3,000 kg drop lashing brackets at approx. 600 mm spacing possible – each side is equipped with 12 pcs. 3,000 kg lashing brackets included in delivery * Each side has 5 pockets for 100 x 50 mm stake posts in the outer frame – stakes not included in delivery * 30 mm phenolic resin-coated plywood floor ----Drum supports: * 3 pcs. galvanised drum supports secured by container locks with side forklift pockets center/center 800 mm (pocket width 185 mm) * Max. drum diameter 2,600 mm and max. drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with cross-bracing * Permissible drum weight per cable support 6,000 kg * Without drive and drum brake * Support arm with clamping lock for securing drum shaft * Steel drum shaft 76 mm diameter, with centring and rotating ends * 2 locating rings * 2 centring cones made of polyamide * 4 pcs. 3.2 t lashing eyes on the support arms for securing the drum against rotation and uncoiling by the customer ----Loading height: * Approx. 1,040 mm loaded ----Paintwork: * Chassis, turntable, drawbar, outer frame, underrun protection hot-dip galvanised * Axles painted in a shade of black ----Information: * Technical upgrade to 30 tonnes GVW possible * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: Ljdpfxsx Nli Ne Aiceac * Available from week 51/2026

Stanje: novo, največja dovoljena obremenitev: 6.870 kg, skupna masa: 8.800 kg, konfiguracija osi: 1 os, Leto izdelave: 2026, * KWH 9.9 ML: ----Brakes: * EBS brake system * Drum brakes * Emergency release device for spring-loaded cylinders ----Axle: * BPW axle ----Suspension: * Parabolic springs ----Drawbar / Flange eye: * Drawbar with 40 mm screwed towing eye (height adjustable mm) ----Electrics / Lighting: * 15-pin power connector * LED lighting * Flashing LED side marker lights * RDÜ tire pressure monitoring ----General attachments: * Support winch at the front * Spring-assisted square tube supports at the rear with base plate; safety locking pins for various support heights * Closed steel sheet mudguards with splash protection * Closed side underrun protection, can be used as advertising space * Plastic toolbox with floor insert (installed horizontally), approx. 500 x 350 x 400 mm ----Superstructure: * Pivoting cable drum superstructure, clear width between drum arms 1,700 mm, with tension locks for securing the drum at the ends of the support arms, and central claw locking device securing the drum superstructure to the chassis * Motor-hydraulic drum drive with oil motor * Valves and movable, rubber-covered drive rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft, 76 mm diameter, with centering and rotating ends * 1 pair of stepwise offset centering cones made of polyamide ----Chassis: * Chassis made of torsion-resistant square tubes and cross members ----Pump unit: * Hydraulic pump unit with diesel engine * Fuel tank and hand starter * 6.5 HP with gear pump (150 bar) ----Tires: Laodpeu I Iqlefx Aicjc * 315/80 R 22.5 ----Unladen weight: * 2,690 kg unladen weight ----Paintwork: * Vehicle is hot-dip galvanized ----Information: * New vehicle with full manufacturer warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 6.870 kg, skupna masa: 9.900 kg, konfiguracija osi: 1 os, Leto izdelave: 2026, * KWH 9,9 ML: ----Zavora: Lasdpfxju I Iqfs Aicsc * EBS-zavorni sistem * Bobnasta zavora * Naprava za nujno sprostitev za vzmetno shranjevalni valj ----Os: * BPW os ----Vzmetenje: * Parabolične vzmeti ----Vlečna cev / prirobnica vlečne zanke: * Vlečna cev s 40 mm vijačno vlečno zanko (nastavljiva po višini mm) ----Elektrika / Razsvetljava: * 15-polni električni priključek * LED razsvetljava * utripajoče LED stranske označevalne luči * RDÜ nadzor tlaka v pnevmatikah ----Splošni priključni deli: * Podporna vitla spredaj * Vzmetno podprte kvadratne podpore zadaj z osnovno ploščo; varnostni zaporni zatiči za različne višine podpore * Zaprta blatnika iz jeklene pločevine z zaščito pred pršenjem * Zaprta stranska zaščita z možnostjo uporabe kot oglasna površina * Plastična orodjarna z dnom (v ležeči vgradnji) pribl. 500 x 350 x 400 mm ----Nadgradnja: * Zasučna kabelska vitelna nadgradnja, svetla širina med ročicami vitla 1.700 mm, z zapiralom za pritrditev vitla na koncih nosilne roke ter z aretacijo kabelske vitelne nadgradnje in podvozja z osrednjo kremensko zaporo * Motoriziran hidravlični pogon vitla z oljnim motorjem * Ventili in premični pogonski valji z gumijasto prevleko * Hidravlični regulator hitrosti in zavora za pogon vitla * Jeklena vitelna os premera 76 mm z centriranjem in vrtljivimi konci * 1 par centrirnih stožcev iz poliamida, stopničasto oblikovanih ----Podvozje: * Podvozje iz torzijsko odpornih kvadratnih cevi in prečk ----Črpalna enota: * Hidravlična črpalna enota z bencinskim motorjem Loncin, vključno z ročnim in električnim zaganjalnikom * Rezervoar za gorivo in ročni zaganjalnik * 13 KM z zobniško črpalko (150 bar) ----Pnevmatike: * 315/80 R 22,5 ----Lastna masa: * 2.690 kg lastne mase ----Barva: * Vozilo je vroče pocinkano ----Informacije: * Novo vozilo s polno proizvajalčevo garancijo * Napake in vmesna prodaja pridržane ----Dobavni rok: * dobavljivo približno od 41. tedna/2026 dalje

Stanje: novo, največja dovoljena obremenitev: 6.870 kg, skupna masa: 9.900 kg, konfiguracija osi: 1 os, Leto izdelave: 2026, * KWH 9.9 ML: ----Brake System: * EBS braking system * Drum brakes * Emergency release device for spring brake cylinders ----Axle: * BPW axle ----Suspension: * Parabolic springs ----Drawbar / Flange Eye: * Drawbar with 40 mm bolted towing eye (height-adjustable mm) ----Electrics / Lighting: * 15-pin power connector * LED lighting * Flashing LED side marker lights * RDÜ tire pressure monitoring system ----General Attachments: * Support winch at the front * Spring-assisted square tube supports at the rear with base plate. Safety locking pins for various support heights * Closed steel mudguards with spray protection * Closed side underrun protection, can be used as advertising space * Plastic toolbox with floor inlay (horizontal installation), approx. 500 x 350 x 400 mm ----Superstructure: * Swiveling cable drum superstructure, clear width between drum arms 1,700 mm, with tension lock on the drum arm ends, plus central claw lock securing the cable drum superstructure to the chassis * Motor-driven hydraulic cable drum drive with oil motor * Valves and movable, rubber-coated drive rollers * Hydraulic speed regulator and brake for the drum drive * Steel drum shaft, 76 mm diameter, with centering and rotating ends * 1 pair of polyamide centering cones, stepped ----Chassis: * Chassis made from torsion-resistant square tubing and cross beams ----Pump Unit: * Hydraulic pump unit with diesel engine * Fuel tank and hand starter * 6.5 HP with gear pump (150 bar) ----Tyres: * 315/80 R 22.5 ----Unladen Weight: * 2,690 kg unladen weight ----Paintwork: * Vehicle is hot-dip galvanized ----Notes: * New vehicle with full manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf Lajdpfx Aju I Iq Eoicsc

Stanje: novo, največja dovoljena obremenitev: 6.870 kg, skupna masa: 9.900 kg, konfiguracija osi: 1 os, Leto izdelave: 2026, * KWH 9,9 ML: ----Zavorni sistem: * EBS-zavorni sistem * Bobnaste zavore * Naprava za odklepanje vzmeti v zavornih cilindrih v sili Laodou I Iqrspfx Aicoc ----Os: * BPW os ----Vzmetenje: * Parabolične vzmeti ----Vlečna gred / Vlečni obroč: * Vlečna gred z 40 mm vijačenim vlečnim obročem (nastavljiva po višini mm) ----Elektrika / Razsvetljava: * 15-polni električni priključek * LED osvetlitev * Utripajoče LED stranske označevalne luči * RDÜ sistem za nadzor tlaka v pnevmatikah ----Splošni priključki: * Sprednje podporno vitlo * Zadnje kvadratne podporne noge s podporno ploščo, vzmeteno, z varnostnimi zatiči za različne višine * Zaprti blatniki iz jeklene pločevine s ščitnikom proti brizganju * Zaprta stranska zaščita za uporabo kot oglasni prostor * Plastična orodjarna s talno oblogo (v ležeči postavitvi) pribl. 500 x 350 x 400 mm ----Nadgradnja: * Zasukljiva kabelska navojna nadgradnja, širina med nosilci 1.700 mm s pritrdilnim zapiralom za varovanje bobna na koncih rok ter zaklepom bobnaste nadgradnje s podvozjem s centralno nameščeno krempljasto zaporo * Motorno-hidravlični pogon bobna z oljnim motorjem * Ventili in pomične pogonske valje obložene z gumo * Hidravlični regulator hitrosti in zavora za pogon bobna * Jeklena os bobna s premerom 76 mm s centriranjem in vrtljivimi konci * 1 par centrirnih stožcev iz poliamida s stopničasto prehodnostjo ----Podvozje: * Podvozje iz torzijsko odpornih kvadratnih cevi in prečnih nosilcev ----Črpalni agregat: * Hidravlični črpalni agregat z bencinskim motorjem Loncin, vključno z ročnim in električnim zagonom * Rezervoar za gorivo in ročni zaganjalnik * 13 KM z zobniško črpalko (150 bar) ----Pnevmatike: * 315/80 R 22,5 ----Lastna masa: * 2.690 kg lastne mase ----Barvanje: * Vozilo je vroče pocinkano ----Informacije: * Novo vozilo s polno garancijo proizvajalca * Napake in predprodaja pridržane ----Dobavni rok: * Na voljo približno od 41. tedna 2026 dalje.

Stanje: novo, največja dovoljena obremenitev: 17.650 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.230 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TP 30.0 with 3 cable drum supports ----Braking system: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lifting and lowering function ----Drawbar: * Drawbar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option via EBS signal in the truck cabin – no installation required on the truck side * 15-pin power connector * 2 additional LED reversing lights (switched via reverse gear) * LED lighting ----General Fittings: * Aluminum air reservoir * Stainless steel tool box, approx. 1,000 x 300 x 600 mm, mounted on the side * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Flatbed: * Zurr-fix outer frame, 45° angled, drilled for lashing equipment, lashing capacity per lashing point 2,000 kg at 480 mm intervals * Installation of 3,000 kg drop lashing rings possible at approx. 600 mm intervals – 12 pcs 3,000 kg lashing rings per side included * 5 pockets per side for pipe stakes (100 x 50 mm) in the outer frame (stakes not included) * 30 mm phenolic plywood floor ----Drum Supports: * 3 galvanized drum supports, secured by container locks, with side forklift pockets, center/center 800 mm (pocket width 185 mm) * Maximum drum diameter 2,600 mm and maximum drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with transverse brace * Maximum drum weight per support 6,000 kg * Without drive and drum brake * Support arm with tension lock for securing the drum shaft * Steel drum shaft, 76 mm diameter, with centering and rotatable ends * 2 collar rings * 2 centering cones made of polyamide * 4 pcs 3.2 t lashing eyes on the support arms for customer-provided drum securing against turning and unspooling ----Loading height: * Approx. 1,040 mm when loaded Laedpfx Aisx Nlkajcsc ----Coating: * Chassis, bogie, drawbar, outer frame, rear under-run protection hot-dip galvanized * Axles painted in a black shade

Stanje: novo, največja dovoljena obremenitev: 17.650 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.230 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TP 30.0 with 3 cable drum supports ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lifting and lowering function ----Drawbar: * Drawbar, 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tyre pressure monitoring system with display capability in the truck dashboard via EBS signal - without truck-side installation - * 15-pin power connector * 2 additional LED reversing lights (activated by reverse gear) * LED lighting ----General Fittings: Lodpox Nlkgjfx Aiceac * Aluminium air tank * Stainless steel side-mounted toolbox approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun guard ----Platform Bed: * Zurr-fix outer frame, 45° edged with hole pattern for lashing equipment, lashing force per point: 2,000 kg at 480 mm spacing * Option to install 3,000 kg drop lashing rings at approx. 600 mm intervals – as standard, each side fitted with 12 x 3,000 kg lashing rings * Each side with 5 sockets for stakes 100 x 50 mm in the outer frame – stakes not included in delivery * 30 mm phenolic plywood floor ----Drum Supports: * 3 galvanised drum supports secured via container locks, with lateral forklift pockets, centre-to-centre 800 mm (pocket width 185 mm) * Maximum drum diameter 2,600 mm and maximum drum width 1,650 mm * Clearance between support arms approx. 1,775 mm, with crossbeam * Maximum drum weight per cable drum support: 6,000 kg * Without drive and without drum brake * Support arm with locking device for securing drum shaft * 76 mm diameter steel drum shaft with centring and rotatable ends * 2 set collars * 2 centring cones made of polyamide * 4 x 3.2 t lashing eyes on support arms for customer-side securing of drum against rotation and unwinding ----Loading Height: * Approx. 1,040 mm loaded ----Coating: * Chassis, bogie, drawbar, outer frame, underrun protection hot-dip galvanised * Axles painted in a shade of black ----Information: * Technical upgrade to 30 t GVW possible * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: * Available from approx. CW 51 / 2026

Stanje: rabljeno, največja dovoljena obremenitev: 38.048 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2020, dolžina tovornega prostora: 13.190 mm, širina tovornega prostora: 3.150 mm, višina nakladalnega prostora: 890 mm, skupna širina: 2.550 mm, skupna višina: 3.550 mm, Leto izdelave: 2020, Oprema: ABS, Kaessbohrer LB3E polpriklopnik nizke izvedbe s hidravličnimi rampami Prva registracija BPW Eco Plus osi Dvižna os Bobnaste zavore z ABS in EBS Zračno vzmetenje Pnevmatike: 245/70 R17,5 40/45% Skupna masa: 48.000 kg, Lastna masa: 9.952 kg, Nosilnost: 38.048 kg. Dolžina labodjega vratu: 3,95 m Dolžina nizke ploščadi: 9,24 m Lasdjy Eupwopfx Aicsc Širina: 2,55 m + 2x30 cm Višina nakladalne površine: 89 cm Hidravlične rampe s stranskim pomikom Zadnje podporne noge Privezni obroči Žepi za kole Pridržujemo si pravico do napak/opisnih napak in vmesne prodaje.

Stanje: rabljeno, največja dovoljena obremenitev: 38.050 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2018, dolžina tovornega prostora: 13.190 mm, širina tovornega prostora: 3.150 mm, višina nakladalnega prostora: 890 mm, skupna širina: 2.550 mm, skupna višina: 3.550 mm, Leto izdelave: 2018, Oprema: ABS, Kaessbohrer LB3E polpriklopnik nizkopodni z hidravličnimi rampami Prva registracija BPW Eco Plus osi Dvižna os Bobnaste zavore z ABS in EBS Zračno vzmetenje Pnevmatike: 245/70 R17,5 35/40% Skupna masa: 48.000 kg, Lastna teža: 9.950 kg, Nosilnost: 38.050 kg Dolžina labodjega vratu: 3,95 m Dolžina nizkega podesta: 9,24 m Širina: 2,55 m + 2x30 cm Višina nakladalne površine: 89 cm Hidravlične rampe s stranskim pomikom Zadnje opore Lsdpfx Aiey Ngapjcsac Privezni obroči Žepi za vložke Pridržujemo si pravico do napak, tipkarskih napak in vmesne prodaje.

Stanje: rabljeno, Komplet zapornih znakov z rampami Ljdsx Nt Utopfx Aiceac

Stanje: novo, največja dovoljena obremenitev: 14.904 kg, skupna masa: 20.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 1.050 mm, Leto izdelave: 2026, Oprema: ABS, WhatsApp HÜFFERMANN HAP 20.72 MultiCarrier Full Option, Arc-Galvanized!!! Equipment: Permissible gross weight: 18 t Technical gross weight: 20 t Unladen weight: approx. 5,096 t (+/- DIN tolerance) Dimensions Frame length: approx. 7,200 mm, internal container length: 6,000 – 7,000 mm + wheeled vehicles Total width max. 2,550 mm Container support height (in driving position): approx. 950 mm Type HPA 2072, twin tires Welded steel frame construction made from high-strength S700 steel Chassis configured for rear loading Load securing with pneumatic low-tension locking system with 4 claws, Clamping force 2.5 t per claw, operation at the trailer on the left side (direction of travel) 1 plug-in roller stop as a variable container stopper Integrated lashing rail on the outer frame for bolted lashing rings 6 pairs of lashing points in the front area of the outer frame Beveled approach at the rear with ramp storage compartment incl. steel plate cover Low-maintenance, sealed slewing ring Hook-in rail for aluminum drive-on ramps (WITHOUT RAMPS) 2 pairs of 5 t lashing rings mounted at the front on the platform, recessed in the rear floor 8 pairs of bolted 3 t lashing shackles on the outer frame, spaced approximately evenly Coupling Equipment Extendable drawbar, adjustable in 6 x 100 mm steps, with 40 mm DIN towing eye, straight eye, D-value 125 kN, for twin-tire chassis Drawbar retaining spring with tensioner Truck coupling height from 635 mm to 835 mm Drawbar length: 2,000–2,600 mm BPW EcoPlus low-loader axles with drum brakes, S-cam brakes 300/200 mm, axle load 10 t/axle, 17.5" Z tires, automatic brake adjusters 8 tires 235/75 R 17.5, 141J 8 steel rims 6.75 x 17.5, offset, silver Black plastic wheel nut caps Brake system complies with ECE Regulation R13 Two-line air brake system Brake system manufacturer: Wabco EBS system 4S3M, sensors on 1st and 2nd axle Electronic brake and stability system EBS-E and RSS or TEBS G2 and RSP Spring-loaded parking brake on 2nd axle Aluminium air tanks Brake/air connection lines with Duomatic quick couplers EBS/ABS connection cable Mount for EBS and electrical connectors at the coupling Air suspension with lift and lower function, operated separately front and rear via 2 rotary lever valves Automatic adjustment to programmed driving height above 15 km/h Lajdpfxsyh Sl De Aicec Schwarzmüller Intelligent Telematics Weight detection/axle load indication via EBS CAN bus signal for display in cab (truck must be prepared accordingly, not a calibrated scale) Tire pressure monitoring system according to ECE regulation 141, with pressure sensors in the wheels Acoustic reversing warning system/alarm, activated by reverse gear 24-volt lighting system according to ECE Regulation R48 Full LED multifunction tail lights "Aspöck EcoLED III" LED position lights at the front LED outline marker lights at the rear LED side marker lights, controlled via indicator signal LED license plate lights Connection cable 1 x 15-pin 2 LED work lights, mounted left and right under the outer frame 2 LED reversing lights, mounted rear left and right 7-pin socket at the rear Paintwork Shot-blasted, arc-galvanized, epoxy primer, final coating with 2K topcoat using electrostatic process Material doublings and transitions treated with cavity wax Chassis: RAL 9005 deep black Load securing elements: RAL 1003 signal yellow Drawbar/tow tube in drivi

Stanje: rabljeno, lastna masa: 6.560 kg, največja dovoljena obremenitev: 18.440 kg, skupna masa: 25.000 kg, konfiguracija osi: 2 osi, prva registracija: 09/2017, dolžina tovornega prostora: 13.700 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 850 mm, medosna razdalja: 7.500 mm, barva: modra, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, dodatne luči, zavorni sistem na stisnjen zrak, * German semi-trailer * Very good visual condition, see photos Ledpfxoxu Nnwj Aicsac * 2-axle low loader, Jumbo TO 152 DE * Loading platform: length 13,700 mm x width 2,540 mm * Loading height approx. 850 mm * Stake pockets * Multilock system * Wooden loading floor * Winch with cable remote control 15,000 lbs * Long aluminium loading ramps 3,000 x 400 mm, laterally adjustable * ROR axles * Air suspension * Haacon spindle supports * ABS + EBS * Work lights * Spare wheel * Toolbox * Brake drums * Wheelbase: 7,500 mm + 1,250 mm * Permissible gross weight up to 27,200 kg * Unladen weight 6,560 kg * Payload up to 20,640 kg If a new TÜV inspection is required, we are happy to provide an offer through our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without new DGUV, without new SP, without new UVV. Further trucks can be found on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspecting the goods to ensure there are no misunderstandings regarding condition and suitability. Inspection and viewing are possible at any time by prior appointment and are expressly desired. All information is provided without guarantee. We accept no liability for errors or inaccuracies in the offer. The buyer is obliged to independently inspect the condition and equipment of the goods/vehicles. Subject to changes, prior sale and errors.

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 07/2020, dolžina tovornega prostora: 5.750 mm, širina tovornega prostora: 2.150 mm, višina nakladalnega prostora: 900 mm, medosna razdalja: 1.000 mm, vrsta prenosa: drugo, voznikova kabina: drugo, zavore: drugo, * German trailer * 1st owner * Condition as shown in photos Lodpfx Aexnqv Aeicjac * Special trailer with tridem axle and split loading platform * Front section with mesh extension, electrically tiltable on both sides * Behind: flatbed/platform/low loader with loading ramps * Large flatbed loading area with phenolic plywood floor and DIN lashing eyes * Ideal for landscaping, construction industry, and much more * Loading area dimensions: 3.75 m x 2.15 m x 0.35 m, aluminium loading side panels * Payload: 2,230 kg * Tipping area dimensions: 2.00 m x 2.15 m x 0.90 m * Electric tipping drive with cable remote control * 100 km/h approval * Tipper bed with steel floor * Tridem axles * GVW: 3,500 kg * Unladen weight: 1,270 kg * Payload: 2,230 kg If a new TÜV inspection is required, we will be pleased to provide a quote from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, without new UVV. Further trucks can be found on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that there are no misunderstandings regarding their condition and suitability. Inspection and viewing are possible at any time by appointment and are expressly desired. All information provided without guarantee. We do not accept liability for mistakes or incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to prior sale, changes, and errors.

Stanje: novo, največja dovoljena obremenitev: 23.920 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, NOVO VOZILO Fliegl 3-osni nizkopodni priklopnik tipa DTS 300, vroče pocinkan Skupna masa 24.000 kg / 30.000 kg Nosilnost 17.920 kg / 23.920 kg Lastna teža 6.080 kg Skupna dolžina 10.900 mm Nakladalna dolžina 8.680 mm Nakladalna površina 6.500 mm vključno z 900 mm nakladalnim nagibom Parabolično vzmetenje Lsdpfxexb Nmyo Aicsac Dolge rampe 2.800 mm s hidravličnim upravljanjem Razširitev na 3.000 mm z opozorilnimi tablami in rotacijsko lučjo Velik komplet za pritrjevanje z zateznimi točkami 5,0 in 10,0 ton 5 parov žepov za nosilce Vlečni obroč 40 mm plus prevoz/stroški priprave iz skladišča Wiesmoor 1.280,00 €/neto Ponudba najema z odkupom: doba 48 mesecev, preostala vrednost 40 %, predujem samo DDV. Mesečna najemnina: 500,00 EUR

Stanje: novo, največja dovoljena obremenitev: 8.840 kg, skupna masa: 11.800 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.200 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, Overall length: 8,000 mm Loading length: 6,200 mm including rear bevel Additional information: plus delivery/preparation ex-stock location 26639 Wiesmoor €1,280.00 net Loading width: 2,480 mm Chassis: central axle trailer Fine-grain steel welded construction Slightly sloped outer frame, new design with "Load-Lock profile" for securing lashing straps Pair of lashing eyes on the outer edge of flooring, each rated 5t: 1 x in the front corners, 1 x in front of and 1 x in the rear bevel 6 pairs of lashing eyes on the outer edge of floor/frame, each rated 5t Gear support leg at front Foldable rear support Wheel chocks with holder Aluminium side underrun protection Galvanised steel rear underrun protection Full-width rear mud flap (not in conjunction with forklift mounting) Quarter shell mudguards 1 plastic toolbox, W=600 / H=425 / D=460 mm, lockable Drawbar for central axle trailer Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 300 mm Axles & Suspension: GFA or BPW axles as per manufacturer’s choice, with tapered roller bearings and S-cam brakes "Axle/chassis laser alignment" reduces tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical load compensation (rocker suspension) Brake System: 2-line compressed air brake system Colour-coded line routing for easy servicing Manual spindle parking brake 2 confusion-proof coupling heads at front, with connecting lines to tractor unit 24 volt ABS and ALB, ABS plug at the front with connecting cable Note: The trailer may only be towed by vehicles capable of ensuring ABS functionality! Wheels and Tyres: 235/75 R17.5, make as per manufacturer’s choice Steel rims, factory silver Electrics: 24 volt, multi-chamber lights, yellow LED side marker lights 2 white position lights at front, LED 2 white/red lane marker lights at rear 2 x 7-pin confusion-proof connectors at front, with connection cable Floor: Steel/chequer plate flooring for high point load capacity Note: Slight floor waviness due to welding distortion possible! Platform length approx. 6,200 mm Rear bevel approx. 900 mm Front wall / front corner posts: 25 mm aluminium hollow section, 400 mm high Lodpfxeyl E Dqo Aiceac Side walls: 25 mm aluminium hollow section, 400 mm high, foldable and removable Centre posts: Without centre posts Rear wall / rear corner posts: 1 pair of steel posts mounted to the frame with provision for securing loading ramps, entrance width approx. 2,430 mm Loading ramps: Steel ramps 2,300 mm long, 510 mm wide, laterally adjustable With carrying handle on ramps Wooden covering (front end area in steel/chequer plate) With gas strut for one-man operation Operating information: The specified gross weight is technically achievable; however, depending on the type of load, the permitted gross weight may not be reached due to permissible axle/support/kingpin loads. (Poor driving and trailing behaviour due to incorrect load distribution possible) Registration country / plates: Germany With Dekra inspection and certification (according to §13 EG-FGV) 24/7 service hotline Prepared for single-line registration plate holder Contour marking with reflective strips in accordance with ECE R 048, white on sides and red at rear Paintwork: Frame DB 7350 Novagrau Front wall aluminium Side walls anodised aluminium Loading ramps hot-dip galvanized