Müller-Mitteltal Kwh 9,9 Kabeltransport-Anhänger Mit Benzinmotor nakup rabljenega (12.996)

Stanje: novo, največja dovoljena obremenitev: 30.740 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes Lsdpsl Tik Njfx Aicoac * 4 x 11 t Gigant axles * Air suspension with lifting/lowering system and RtR valve * Smard board for payload weighing * Warning sign kits, front and rear * Reflective contour tape on the sides and rear * Removable rotating beacon (rear) * LED lighting * Straight drawbar with 50 mm towing eye and infinitely adjustable height * Tool box made of powder-coated steel sheet and basket-type spare wheel holder, mounted right side * Front: closed single plastic mudguard * Rear: straight steel mudguards, each with spray suppression * Side underrun protection * Bogie platform extension by 520 mm with 45° corners, 3 integrated lockable storage compartments with lids * Chassis made of high-strength fine-grained steel * 50 mm softwood floor over bogie platform, 60 mm softwood on low-bed platform * Outer rails on ramps made of hardwood * 4 stake pockets per side (no stakes included); 2 t lashing possible at each * Load securing package: 2 lashing eyes (6.4 t) front left/right on main frame of bogie platform * 2 pairs of lashing rings (13.4 t) on outer frame front/rear per side; 4 pairs of lashing rings (10 t), swing-out and lowerable per side (front/rear) * All lashing points loadable in all directions and recessed into outer frame * 2 pairs of lashing rings (6.4 t) in excavator arm rest area * 8 pairs of galvanized folding outriggers for 3 m overall width (not at rear slope) * Extension planks stored left side in a storage box * Excavator arm rest above rear axle to end of rear slope, approx. 2,100 x 740 x 190 mm * Rear mechanical fall supports * Hydraulic folding ramps with hydraulically adjustable ramp tip, approx. 4,650 x 720 mm, incl. hydraulic lateral ramp adjustment & load-holding valve * Loading area above turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loading height loaded approx. 890 mm, +/-20 mm (incl. 860 mm approach slope) * Flow divider installed * Chassis, bogie, ramps, outriggers and mechanical fall supports hot-dip galvanized * Axles, drawbar, air reservoir and turntable in black finish * Tires: 235/75 R 17.5 * New vehicle, no initial registration, manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf, A7

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, * T 3: * ABS braking system * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle equalizer at the rear * Side underrun protection * Swivel supports at the rear chassis frame * Mechanically adjustable warning plate sets at front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel splash guards, each with spray protection * Reflective contour tape on sides and rear * Hinged lid (hot-dip galvanized) for the toolbox in the bogie platform * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted laterally under the chassis * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * Drawbar scissors with 40 mm towing eye and height adjustment via draw spring & turnbuckle * Four stake pockets per side (stakes not included), also usable for lashing * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform Ledpfeq Dyv Isx Aicjac * Five pairs of UVV-compliant swivel and retractable lashing rings * Loadable in all directions; embedded in the external corners of the frame: 13.4 t, otherwise 10 t * Six pairs of mechanical folding outriggers for 3 m total width (not in rear slope) * Widening planks stored under the load area in a storage compartment * Digger boom tray above rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the tray) * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip section and load holding valves, hydraulically lateral ramp shifting * Hydraulic flow divider in trailer (when truck hydraulic pump output above 40 l/min up to max. 140 l/min), twin-line hydraulics * Load area above turntable: approx. 1,960 x 2,520 mm * Rear load area: approx. 6,500 x 2,520 mm (incl. 860 mm approach slope) * Loaded loading height: approx. 860 mm +/- 30 mm balance adjustment * Chassis, bogie, folding outriggers, drop supports at the rear and loading ramps hot-dip galvanized * Axles, springs, drawbar scissors, air tanks, etc. painted black * New vehicle with manufacturer warranty * Subject to errors and prior sale * Availability from week 19/2026

Stanje: novo, največja dovoljena obremenitev: 20.500 kg, skupna masa: 27.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TR 27.0 Platform: * EBS (Electronic Braking System) * Emergency release system for spring-loaded brake cylinders * Drum brakes * 3 x 9 t BPW Eco axles * Air suspension with lift and lowering device including RTR function * First axle liftable * Last axle is self-steering trailing axle with electro-pneumatic steering lock via reverse gear PIN (Steering lock for trailing axle activated from the tractor for maneuvering purposes—no truck-side installation required—wired to PIN 10 in the 15-pin connector, only for maneuvering and not for use on public roads) * SmartBoard control unit as infotool with pressure sensors for displaying total axle load * Tire pressure monitoring with readout in the truck via EBS signal, no truck-side installation required * Fixed center drawbar with 50 mm flange drawbar eye (loaded 900 mm, mm height adjustment at the head plate) * Mechanical landing gear at the front, mechanical swivel supports at the rear chassis * Hydraulic flow divider * Continuous side walls (without center stanchion) up to the drive-on slope * Folding rear stanchions * Steel rear wall slotted in before rear stanchions * Mechanically adjustable warning panel kit front and rear * Toolboxes made of galvanized steel sheet—black powder-coated—approx. 650 x 300 x 600 mm, right side * 15-pin power connector * LED tail lights * Removable LED rotating beacon incl. bracket and installation * 2 x LED reversing lights at vehicle rear (activated via reverse gear) * Flashing LED side marker lights * 60 mm larch/douglas fir wooden floor * 400 mm steel front wall slotted in * Perforated outer frame approx. 45° angled with provisions for mounting 3 t folding lashing rings * In each corner: 1 x 10 t lashing ring, plus 2 x 10 t and 3 x 6.3 t lashing rings on each side * Various holes for 1.2 t lashing points in front and rear crossmembers * Hydraulic one-piece loading ramps approx. 3,000 x 720 mm, mechanically adjustable sideways Laodpfx Aior Dpzxscsc * 4-circuit hydraulic control block for potential retrofit of hydraulic ramp shifting * Chassis, drawbar, front wall, mechanical rear supports, and loading ramps hot-dip galvanized * Axles, air tanks, flange drawbar eye, and front landing gear painted in black * Hydraulic flow divider in the trailer (for hydraulic pump output in truck from over 40 l/min up to 120 l/min) * New vehicle with manufacturer warranty * Subject to error and prior sale * Available immediately ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 18.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA-Kombi 24.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axle: * 3 x 11 t Gigant axles * Centre axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye & height adjustment ----Electrics / Lighting: * LED rear lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Toolbox made of powder-coated sheet steel (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized sheet steel (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash protection * Plastic rear bumper buffer * Mechanical drop-down supports at the rear Ledpfepk D Awjx Aiceac ----Container / Low-bed platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) to guide roll-off containers * Steel floor with roll grooves in the bogie area * When transporting roll-off containers, container length from 5,500 to 7,000 mm possible * Pneumatic 4-point container locking and mechanically insertable front stop angles in the running rails * Load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ volume possible * Includes 8 repositionable skip stops for lateral centering of skips, front 4 skip stops fitted with pivoting stops ----Load securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements for positive and non-positive securing of skips * 4 cloverleaf lashing points on each side and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Weld bead as anti-slip surfacing in the running area of the access slope * 1 pair of aluminium loading ramps (16 t / pair), 2,800 x 400 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment accessible from the rear) ----Tyres: * Tyres: 235/75 R17.5 ----Ride height: * Ride height, loaded: approx. 1,003 mm ----Payload: * Payload: 18,900 kg ----Paintwork: * Reflective contour marking tape, side and rear * Axles, turntable, drawbar and air tank painted black * Hot-dip galvanized main frame ----Information: * Gross vehicle weight technically possible: 27,000 kg * New vehicle without initial registration with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. week 47/2026

Stanje: novo, največja dovoljena obremenitev: 10.360 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 14.4: ----Brakes: * Electronic Brake System (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * Gigant axles ----Suspension: * Air suspension with lift and lower facility ----Drawbar / Flange Eye: * Drawbar height adjustable by approx. 300 mm * 40 mm flange drawbar eye Lsdpfxepk D Dqo Aicoac ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System with in-cab display via EBS signal; no truck-side installation required) * LED lighting system * 15-pin power connector ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding support legs at the rear * Plastic toolbox, front right, mounted outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood flooring * Provision for retrofitting 20" container locks at front and rear * Bolted bulkhead made of smooth sheet steel * Fold-down side walls, trapezoidal profile, with drop-side spring assists * Bolted, hot-dip galvanized rear stanchions ----Load Securing: * Outer frame with holes, approx. 45° angled, 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * Each of the front and rear corners fitted with 1 x 6.3 t lashing ring * Various holes in front and rear cross members for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t per pair), suitable for pneumatic and tracked vehicles; stowed at the rear in a compartment integrated below the deck in the chassis ----Paintwork: * Hot-dip galvanized chassis, drawbar, bulkhead, and rear wall * Vehicle fully hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Subject to error and prior sale ----Delivery Time: * Available immediately ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 14.620 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, * RA-T 18.0 / 018: * Wabco EBS-E (electronic braking system) * RDÜ tyre pressure monitoring system * Emergency release for spring brake cylinders Lsdpfxsv Nulzj Aicoac * Disc brakes * 2 x 10 t BPW wide-track axles * Air suspension (automatic lowering when brake is uncoupled) * Drawbar approx. 2,300 mm long with 40 mm towing eye and height adjustment via draw spring & turnbuckle * Plastic toolbox 450 x 470 mm mounted right side * Side-mounted mesh box 1,000 x 500 x 5000 mm * Enclosed plastic mudguards front & rear * Closed side underrun protection, suitable as advertising panel * Rear underrun protection * Rear plastic anti-collision buffers * Rear ADR plate * 15-pin electrical connector * LED tail lights * Track length approx. 6,830 mm * Pneumatic 4-point clamping lock * Mechanically adjustable stop brackets (2 positions) front left and right on the guide tracks * 265/70 R 19.5 twin tyres * Unladen weight: 3,220 kg * --Permissible gross weight technically up to 20,000 kg-- * Ride height loaded: approx. 1,130 mm * Suitable for container lengths of 5,500 – 7,000 mm * Hot-dip galvanized chassis * Air tanks, axles, turntable, and drawbar * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from approx. week 29 / 2026

Stanje: novo, največja dovoljena obremenitev: 23.700 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T3 Profi 30.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with lift/lower function and RtR valve * Smart-Board as infotool * Side underrun protection * Swivel supports at rear chassis frame * Mechanically adjustable warning panel sets front and rear * Front closed plastic mudguards and rear straight galvanized steel skirts, each with spray protection * Reflective contour tape on sides and rear * Hinged (hot-dip galvanized) toolbox lid on bogie platform * LED tail lights * Removable rear amber beacon * Drawbar with 40 mm towing eye and height adjustment via tension spring and turnbuckle * 15-pin electrical connector * Four side stake pockets each with integrated 2 t lashing points * Load securing package consisting of: 2 lashing rings (6.4 t) at front left & right on main frame of bogie platform, 5 pairs of UVV-compliant swivel and lowerable lashing rings loadable in all directions and embedded in external frame – at corners up to 13.4 t, otherwise 10 t Lasdpfol Tq Eujx Aicec * 6 pairs of mechanical folding outriggers for 3 m overall width (not in rear tapered section) * Widening planks stored in center of loading area * Hydraulic single-section loading ramps (approx. 3,000 x 720 mm), laterally adjustable * Digger arm rest above rear axle up to crossmember, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on side of digger arm rest) * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach ramp) * Chassis, bogie, drawbar, folding wideners & loading ramps hot-dip galvanized * Axles, turntable, air tanks, etc. painted in black * Tires 235/75 R 17.5 * Payload approx. 24,000 kg at 30,000 kg gross weight * New vehicle with manufacturer warranty * Errors and prior sale excepted * Available from approx. calendar week 32 / 2026 * Sample images

Stanje: novo, največja dovoljena obremenitev: 8.870 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 11.9: ----Braking System: * Electronic braking system (EBS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle units ----Suspension: * Parabolic springs with balancing unit ----Drawbar / Flange Eye: * Drawbar height adjustable by approx. 300 mm * 40 mm flange towing eye ----General Attachments: * Jost mechanical landing gear at front * Bolt-on, hot-dip galvanized folding supports at rear (external) * Side underrun protection * Plastic quarter mudguards * Plastic toolbox on front right, externally mounted on front wall ----Electrics / Lighting: Laedpfx Aol Tilxoicoc * Tyre pressure monitoring system (TPMS) * 15-pin power connector * LED tail lights ----Load Area: * 50 mm softwood floor * 20" container locks mounted at front and rear * Bolted bulkhead made of smooth steel sheet * Drop sides made of trapezoidal-profile steel sheet, foldable with sideboard spring lifter * Hot-dip galvanized bolted rear stanchions ----Load Securing: * Perforated outer rail, edged at approx. 45°, with lashing capacity of 2 t every 480 mm * Optional 3 t folding lashing brackets every 600 mm (five lashing rings mounted per side) * One 6.3 t lashing ring in each corner, front and rear * Various bores in front and rear crossmembers for 1.2 t lashing points ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Rear storage compartment recessed into the chassis frame under the loading area ----Paintwork: * Hot-dip galvanized chassis, drawbar, bulkhead, and rear wall * Sideboard colour in RAL 9010 pure white * Painting of side walls in a RAL colour of choice available at extra charge ----Information: * New vehicle, not registered * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.900 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, * KA-TA-R 14.4 ----Braking system: * Wabco EBS * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem compensating unit ----Drawbar / Flange towing eye: * Vertically adjustable (approx. 300 mm) hot-dip galvanized drawbar with 40 mm flange towing eye ----General attachments: * Jost mechanical landing gear, front * 2 mechanical, hot-dip galvanized folding supports at the rear * Hot-dip galvanized bolted underrun protection * Toolbox made of galvanized sheet steel, right side * Plastic quarter mudguards * Two-step step on the left side as access aid ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power connector * LED tail lights ----Tipper body: * Steel, pallet-width, 3-way tipper body * Continuous upper sidewalls with inner pipe reinforcement, foldable without center stanchions, with drop side spring assist * Tailboard foldable and swinging with manual central locking * Hot-dip galvanized, bolted rear stanchions * 4 mm fine-grain steel floor * Net hooks, mounting rail at the rear for approach ramps * Prepared for subsequent installation of sidewall extensions ----Chassis: * Hot-dip galvanized chassis ----Load securing: Laodpfx Aev Dz N Noicjc * Each corner equipped with 1 x 5 t lashing ring, each side with 4 x 3 t lashing eyes recessed in the outer frame ----ALU approach ramps: * 1 pair aluminum approach ramps approx. 3570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Rear-lockable storage compartment under the loading area, integrated into the chassis ----Tyres: * Tyres 385/55 R 22.5 ----Paintwork: * Axles, springs, air tanks and landing gear painted black * Chassis, drawbar, floor, front wall, folding supports hot-dip galvanized * Side boards painted in a RAL custom color (no special or metallic paint), color can be changed up to approx. 6 weeks before completion ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle without first registration, including manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. week 29 / 2026

Stanje: rabljeno, največja dovoljena obremenitev: 12.080 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 06/2024, dolžina tovornega prostora: 3.900 mm, širina tovornega prostora: 1.920 mm, višina nakladalnega prostora: 415 mm, Leto izdelave: 2022, Oprema: ABS, * ETM-TA 14.4: ----Brakes: * Wabco ABS braking system * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar (+/- 150 mm) * 40 mm bolt-on drawbar eye ----General Attachments: * Jost landing gear at the front * Lateral underrun protection * Foldable A-frame shield at the rear ----Electrics / Lighting: * 15-pin power socket * Multi-chamber taillights ----Body: * Fixed steel front and side walls * Removable steel rear wall * Floor made of 50 mm softwood * 1 sliding steel plate support 750 x 1,000 mm at the front, incl. 2 interchangeable skip stops at the front, plug-in at 2 positions each * Rear crossmember designed for aluminum loading ramps, incl. 2 additional drop-down supports at the rear ----Loading Edge: Laedpfsl Th Dmex Aicjc * Unloaded loading height approx. 710 mm ----Load Securing: * 4 repositionable skip stops, can be placed in 2 positions for lateral centering of skips * Each side with 1 x (13.5 t) UVV tie-down point for securing lashings * 2 ratchet tensioners (spindle adjustment) with balancing chain and quick shortener (tension force 6,300 kg) ----Tyres: * Tyres: 285/70R19.5 ----Wheelbase: * Wheelbase: 1,140 mm ----Paint / Finish: * Chassis, front wall, side walls, mudguards, drawbar, rear drop supports hot-dip galvanized * Axles, springs, landing gear, and air tanks painted in black ----General Information: * Vehicle has a day registration from 06/2024 due to missing tire pressure monitoring system and has not been loaded/used * Errors and prior sale excepted ----Delivery Time: * Available immediately from Egestorf on the A7

Stanje: novo, največja dovoljena obremenitev: 14.650 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, Leto izdelave: 2024, * RS-T 18.0 / 018: * Wabco EBS-E (electronic braking system) * TPMS (Tire Pressure Monitoring System) * Emergency release mechanism for spring-loaded cylinders * Disc brakes * Duomatic brake coupling Lajdpfx Asl Tqkwoicec * 2 x 10-ton SAF axles * Air suspension with automatic lowering when uncoupling the brakes * Drawbar 2,300 mm long with 40 mm towing eye and height adjustment via draw spring & spindle * Plastic tool box on right side, enclosed plastic mudguards * Enclosed side underrun protection suitable as advertising space * Rear underrun protection with 2 impact buffers * Foldable "A" sign at the rear for waste disposal * LED tail lights with protective cover * 2 x 7-pin electrical connectors * Chassis hot-dip galvanized (excluding air tanks, axles, drawbar, etc.) * Roller track length approx. 6,950 mm * Locking of the roll-on container using pneumatic 4-point claw system * Front: 2 insertable container stops with 2 additional locking positions * Unladen ride height approx. 1,165 mm * --Permissible gross weight technically possible: 20,000 kg-- * Suitable for container lengths of 5,000 to 7,000 mm * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Immediately available from Egestorf

Stanje: novo, največja dovoljena obremenitev: 9.070 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.010 mm, višina nakladalnega prostora: 325 mm, Leto izdelave: 2026, * ETS-TA-B 11,9: Lodpjwyhzvefx Aicjac * Wabco EBS (elektronski kočioni sistem) * RDÜ (nadzor pritiska u pneumaticima) * Bubanj kočnice, 2 x 5,5 t Gigant osovine * Parabolične opruge sa balans agregatom * Vučna ruda podesiva po visini oko 300 mm * BPW oslonac (nožna dizalica) * Mehaničke zadnje potpornice * Plastična kutija za alat napred desno uz čeonu stenu * Bočna zaštita od podlijetanja * LED osvetljenje * Pod od mekog drveta (nordijska jela) debljine 50 mm * U uglovima ispred čeone stene i zadnjeg nosača po 1 x 6,3 t anker, kao i sa svake strane po 2 UVV ankerska prstena od 6,3 t ugrađena u spoljašnji ram * Jednodelne mehaničke rampe od rešetkastog metala sa oprugom za upravljanje jednom osobom, dimenzija cca 2.350 x 870 mm (unutrašnje rastojanje 20 mm, rampe nisu pomične) * Čeona stena, bočne stranice, blatobrani i vučna ruda toplo pocinkovani * Osovine, opruge, vazdušni rezervoar, prednji oslonac lakirani u crnoj boji * Novo vozilo sa punom fabričkom garancijom * Zadržavamo pravo na greške i međuprodaju * Dostupno od približno 35. nedelje 2026.

Stanje: novo, največja dovoljena obremenitev: 13.830 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.995 mm, širina tovornega prostora: 2.380 mm, višina nakladalnega prostora: 900 mm, Leto izdelave: 2026, * KA-TA-R 18 ----Brakes: * EBS-E (electronic braking system with RSS) * Emergency release for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 9 t Gigant axles ----Suspension: * Air suspension with level control during tipping Ledpfx Asx Ipbysicoac ----Electrics / Lighting: * Tire pressure monitoring system with display possibility in the truck dashboard via EBS signal – no installation required on the truck side * 15-pin power connector * LED lighting with galvanized protective cover * 2 LED reversing lights ----Drawbar eye / Drawbar: * Drawbar with 50 mm flange towing eye (adjustable by +77 mm and -33 mm using offset plate) ----General attachments: * Landing leg at the front * Foldable galvanized steel underrun guard for paver feeding * Enclosed single plastic mudguards * Front wall platform made of grating with step on drawbar and handholds on the front wall ----Chassis: * Chassis made of fine-grain steel ----Tipper body: * Steel 3-way tipper body with continuous asymmetrical aluminum side walls – without center stanchion – pendulum-mounted with manual central locking, left side foldable with side board spring lifter * Tailgate – made from HBW 400 steel – pendulum-mounted with automatic 2-claw lock * 5 mm steel floor made from HBW 450 steel ----Load securing: * 4 x 3 t lashing rings per side – recessed and foldable – integrated into the steel floor ----Roll tarp: * Roll tarp – agate grey, similar to RAL 7038 * Tarpaulin tensioning using ratchet tensioners on the sides and tensioning rubber at the front and rear ----Painting: * Chassis, underrun guard, and drawbar hot-dip galvanized * Axles, air tanks, landing leg, and flange towing eye painted in a shade of black * Side wall painting according to RAL color of choice (excluding special or metallic paints); color can be changed up to approx. 6 weeks before completion ----Info: * Reinforced and certified body according to EN 12642 XL, including load securing certificate up to 19 t * New vehicle without first registration, with manufacturer’s warranty * Subject to errors and prior sale * Sample images (vehicle images may vary due to special equipment) ----Delivery time: * Vehicle available from week 42/2026

Stanje: novo, največja dovoljena obremenitev: 13.500 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA-Kombi 18.0: * 3-in-1 = for roll-off containers, skip containers, and as a low-loader ----Brakes: * TPMS (Tire Pressure Monitoring System) * EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders ----Axles: * 2 x 12 t Gigant axles ----Suspension: * Parabolic springs ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long * 40 mm drawbar eye with height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS, display option in the truck via EBS signal (no installation required on the truck side) ----General Attachments: * Toolbox made of powder-coated steel sheet, right side * Side underrun protection * Plastic quarter mudguards with spray protection * Storage box made of galvanized sheet metal for container nets, approx. 960 x 300 x 400/450 mm, right side * Plastic bumper buffer at rear * Mechanical drop-down supports at rear Ledpsl Thv Rjfx Aicsac ----Load Area: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) to guide roll containers * Steel floor with roller recesses in the bogie area * Possible to transport roll-off containers with a length of 5,500–7,000 mm * Pneumatic four-point clamp locking as well as mechanical locking angles at the front in the track, securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. volume of 10 m³ possible * Includes 8 removable tub stops for lateral centering of the tubs; front 4 stops plugged in with pivotable stop * Weld bead as anti-slip coating in the ramp area of the run-up incline ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements to securely fix the tubs * 4 lashing bars per side, cloverleaf design * 1 pair of 13.4 t UVV lashing rings at the front ----Ramps: * 1 pair of aluminium drive-on ramps (10.6 t / pair), 2,800 x 470 mm, suitable for rubber-wheeled and tracked vehicles (lockable storage compartment accessible from the rear) ----Information: * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Permissible gross weight up to 20,000 kg technically possible * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. calendar week 44 / 2026

Stanje: novo, največja dovoljena obremenitev: 13.500 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA-Kombi 18.0: * 3 in 1 = for roll-off containers, skip containers, and as a low-loader ----Brakes: * TPMS (Tire Pressure Monitoring System) * EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders ----Axles: * 2 x 12 t Gigant axles ----Suspension: * Parabolic springs ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long * 40 mm towing eye and height adjustment device ----Electrical / Lighting: * LED tail lights Ljdpfol Thwcex Aicjac * 15-pin power connector * TPMS, display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Tool box made of powder-coated sheet steel, right side * Side underrun protection * Plastic quarter mudguards with spray protection * Storage box for container nets, made of galvanized sheet, approx. 960 x 300 x 400 / 450 mm, right side * Plastic rear collision protection buffers * Mechanical drop-down supports at the rear ----Loading Area: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) to guide roll containers * Steel floor with roller recesses in the bogie area * For roll-off container transport, possible container length from 5,500 to 7,000 mm * Pneumatic 4-point clamp locking as well as mechanically insertable stop angles at the front in the track, load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ volume possible * Includes 8 removable skip stops for lateral centering of the skips, front 4 skip stops inserted with pendulum mount * Weld bead as anti-slip coating in the ramp area ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the side for attaching tension elements for positive and non-positive securing of the skips * 4 lashing bars each, cloverleaf design (side) * 1 pair of 13.4 t UVV lashing rings to the front ----Ramps: * 1 pair of aluminum access ramps (10.6 t/pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Information: * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Permissible gross weight of 20,000 kg technically possible * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. CW 44 / 2026

Stanje: novo, največja dovoljena obremenitev: 8.850 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2024, * KA-TA-R 11.9 "Masterline" ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem compensating unit ----Drawbar / Flange Eye: Lasdol Thyxjpfx Aicsc * Approx. 300 mm height-adjustable drawbar with 40 mm flange eye ----General Fittings: * Jost mechanical landing gear at front * Rear: 2 mechanical, hot-dip galvanized drop-down support legs * Plastic toolbox approx. 750 x 350 x 300 mm, fitted on right side * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS tire pressure monitoring system ----Tipping Platform: * Mesh hooks on the sides and rear in the central locking fixtures, plus 2 at the front wall * Steel pallet, 3-way tipping body (continuous sidewalls – without center stanchions – foldable with drop side spring assistance) * Rear stanchions bolted * Combination steel double rear doors, asymmetrically split, can be swung open and locked at 270°, not foldable – with additional pendulum frame for automatic tailgate opening during tipping operation; locking via galvanized swing bolt locking and central locking system * Deactivation function for automatic rear wall opening when tipping backwards with open door * 4 mm steel floor plate * Rear ramp carrier rail for drive-on ramps ----Load Securing: * 1 x 5 t lashing point in each corner * 4 x 3 t recessed lashing rings per side, fitted in the outer frame ----Ramps: * 1 pair of aluminum drive-on ramps approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for vehicles on rubber tires & tracks * Lockable storage compartment for ramps under the loading platform, integrated into the chassis ----Paint Finish: * Drawbar, front wall, tipping platform, rear stanchions, underrun protection, and mechanical support legs hot-dip galvanized * Sidewalls and tailgate painted RAL 9010 pure white * Sidewall painting in any RAL color available at extra charge * Axles, springs, flange eye, air tank, and landing gear painted in a black tone ----Information: * Body reinforced with load securing certificate according to EN 12642 XL * New vehicle without initial registration, with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Immediately available ex-works Egestorf on A7

Stanje: rabljeno, največja dovoljena obremenitev: 12.080 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 06/2024, dolžina tovornega prostora: 3.900 mm, širina tovornega prostora: 1.920 mm, višina nakladalnega prostora: 415 mm, Leto izdelave: 2022, Oprema: ABS, * ETM-TA 14.4: ----Brakes: * Wabco ABS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles Ledpol Th Eyjfx Aicsac ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange towing eye: * Height-adjustable drawbar (+/- 150 mm) * 40 mm bolt-on towing eye ----General attachments: * Jost landing gear at the front * Side underrun protection * Foldable A-panel at the rear ----Electrics / Lighting: * 15-pin power connector * Multi-chamber tail lights ----Superstructure: * Fixed steel front and side walls * Removable steel rear wall * Floor made of 50 mm softwood * 1 sliding plate cover 750 x 1,000 mm at the front incl. 2 removable skip stops, front in 2 positions * Rear cross member for attaching aluminium ramps, incl. 2 additional drop-down supports at the rear ----Loading edge: * Unloaded loading edge approx. 710 mm ----Load securing: * 4 removable skip stops, can be inserted into 2 positions for lateral centring of the skips * On each side: 1 x (13.5 t) UVV lashing point for attaching tensioning devices * 2 ratchet tensioners (spindle adjustment) with compensating chain and quick-shortener (tensioning force 6,300 kg) ----Tyres: * Tyres: 285/70R19.5 ----Wheelbase: * Wheelbase: 1,140 mm ----Paintwork: * Chassis, front wall, side walls, mudguards, drawbar, rear drop supports hot-dip galvanized * The axles, springs, landing gear, and air tank painted in a black tone ----General information: * Vehicle has a one-day registration in 06/2024, due to missing tyre pressure monitoring system it has not been loaded/used * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf on the A7

Stanje: novo, največja dovoljena obremenitev: 30.740 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift/lowering system and RtR valve * Smard board for load weight determination * Warning sign packages front & rear * Reflective contour marking tapes on sides and rear * Rotating beacon (removable) at rear * LED lights * Straight drawbar with 50 mm towing eye and continuously adjustable height * Tool box made of powder-coated sheet steel and spare wheel holder in basket design, right-hand side * Closed single plastic mudguards at front * Straight rear steel splash guards, each with spray suppression * Side underrun protection * Turntable platform front extension by 520 mm with 45° corners and 3 flush storage compartments with lids, lockable * Chassis made of high-strength fine-grained steel * Decking above turntable platform: 50 mm softwood, in low-bed platform: 60 mm softwood * Outer planks of access ramps: hardwood * Each side features 4 stake pockets (stakes not included), with simultaneous 2 t lashing points * Lashing package includes: 2 lashing rings 6.4 t, front left and right on main frame of turntable platform * On sides, front & rear, 2 pairs of 13.4 t lashing rings on outer frame; sides each with 4 pairs of 10 t lashing rings, pivoting & lowerable * Loadable in all directions, recessed in the outer frame * 2 pairs of 6.4 t lashing rings on the excavator stick rest area * 8 pairs of galvanized folding outriggers for 3 m overall width (not in the rear slope) * Extension planks stored left side in a stowage compartment * Excavator stick rest above rear axle to rear slope approx. 2,100 x 740 x 190 mm * Mechanical drop supports, rear * Hydraulic folding ramps with hydraulic tip section approx. 4,650 x 720 mm including lateral hydraulic ramp shift & load holding valve * Load area over turntable: approx. 2,990 x 2,520 mm * Rear load area: approx. 6,780 x 2,520 mm * Loading height loaded: approx. 890 mm, +/- 20 mm (incl. 860 mm drive-on slope) * Flow divider installed * Chassis, turntable, ramps, outrigger arms, and mechanical rear supports hot-dip galvanized * Axles, drawbar, air reservoir, and turntable painted in a black tone Lodjl Tphrjpfx Aicsac * Tires: 235/75 R 17.5 * New vehicle, not previously registered, with manufacturer warranty * Subject to errors and prior sale * Immediately available ex Egestorf on the A7

Stanje: novo, največja dovoljena obremenitev: 14.650 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, Leto izdelave: 2024, * RS-T 18.0 / 018: * Wabco EBS-E (electronic brake system) * RDÜ tire pressure monitoring system Laodpfx Ajl Tpy Hsicsc * Emergency release device for spring-loaded cylinders * Disc brakes * Duomatic brake coupling * 2 x 10 t SAF axles * Air suspension with automatic lowering when uncoupling the brake * Drawbar 2,300 mm long with 40 mm towing eye and height adjustment via tension spring & spindle * Plastic toolbox on the right side, closed plastic mudguards * Side impact protection closed on one side, suitable as an advertising surface * Rear underrun protection with 2 buffer stops * Foldable "A"-sign at the rear for waste disposal * LED tail lights with protective housing * 2 x 7-pin power connectors * Chassis hot-dip galvanized (excluding air tanks, axles, drawbar, etc.) * Roller track length approx. 6,950 mm * Roll-off container secured with pneumatic 4-point claw locking system * At the front: 2 plug-in container stops with 2 additional plug-in positions * Unladen ride height approx. 1,165 mm * -- Permissible gross weight of 20,000 kg technically possible -- * Suitable for 5,000 – 7,000 mm container lengths * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 18.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA-Kombi 24.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes Ledotplv Topfx Aicjac ----Suspension: * Air suspension with manual lowering at the rear ----Axle: * 3 x 11 t Gigant axles * Lifting middle axle ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye and height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Toolbox made of powder-coated steel sheet (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel sheet (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear bumpers * Mechanical rear drop-down supports ----Container / Low-bed Platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) for guiding roll-off containers * Steel floor with roller recesses in the bogie area * For roll-off container transport, container length of 5,500 - 7,000 mm possible * Pneumatic 4-point container clamp locking as well as mechanically plug-in front stop angles in the guide tracks * Load certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ capacity possible * Includes 8 repositionable skip stops for lateral centering of the skips, front 4 skip stops plug-in with pendulum stoppers ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning devices for positive and non-positive load securing of skips * 4 lashing rails in cloverleaf design (side) and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Weld bead as anti-slip coating in the ramp incline running area * 1 pair of aluminum approach ramps (16 t/pair) 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Tyres: * Tyres: 235/75 R17.5 ----Ride Height: * Loaded ride height approx. 1003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Reflective contour tape on sides and rear * Axles, turntable, drawbar and air tanks painted in black * Hot-dip galvanized main frame ----Information: * Permissible gross weight of 27,000 kg technically possible * New vehicle without initial registration with manufacturer warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 47/2026

Stanje: novo, največja dovoljena obremenitev: 31.900 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, T 4 Profi 40.0 ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release for spring-actuated cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with lift/lowering function and RtR valve ----Drawbar: * Straight drawbar with 50 mm towing eye and continuously adjustable height ----Electrics / Lighting: * Tire pressure monitoring system with display option in truck dashboard via EBS signal – no installation required on truck * SmartBoard as infotool with pressure sensors for axle load display per axle group * 15-pin power connector * LED taillights * Removable LED beacon at rear ----General attachments: * Warning plates front & rear * 2 x toolboxes made of galvanized, powder-coated sheet steel approx. 650 x 300 x 600 mm, right side * Closed single plastic mudguards at front * Straight steel spray suppression panels at rear, each with spray suppression * Side underrun protection ----Low-bed platform: * Turntable/platform extension by 520 mm with 45° corners and 3 recessed storage compartments incl. lids and lockable * Flooring on turntable platform made of 50 mm softwood; on low-bed platform made of 60 mm softwood * 20 mm rubber covering instead of timber in drive lane area with a well length of 6,780 mm including sloped ramp * Rubber coating on the ramp left and right, approx. 860 mm length * 4 stake pockets per side (stakes not included) with simultaneous 2 t lashing point capability ----Chassis: * Chassis made of high-strength fine-grain steel ----Load securing (Lasi package): Lsdpeylfvmefx Aicsac Turntable/platform: * 2 pairs of 13.4 t lashing eyes in outer frame of turntable/platform Low-bed: * 4 pairs of 10 t lashing rings per side on the outer frame, foldable and loadable in all directions * 2 pairs of 13.4 t swiveling lashing rings at rear on each side ----Ramps: * Rubber covering on foldable access ramps * Hydraulic folding ramps with hydraulic tip extension approx. 4,650 x 720 mm * Hydraulically lateral ramp shift & load-holding valves ----Rear support: * Hydraulic rear support ----Widening: * 8 pairs of galvanized folding outriggers for 3 m overall width (not on rear bevel) * Widening boards stowed on left side compartment ----Excavator boom trough: * Excavator boom trough above rear axle to end of slope approx. L=2,100 mm x W=740 x D=190 mm * 2 pairs of 6.4 t lashing rings at sides in excavator trough ----Hydraulics: * Hydraulic flow divider in trailer (for truck hydraulic pump outlet above 40 up to max. 120 ltr./min.) ----Loading dimensions: * Rear loading platform: approx. 6,780 x 2,520 mm (incl. 860 mm ramp) * Platform above turntable: approx. 2,990 x 2,520 mm ----Loading height: * Loaded approx. 890 mm, +/- 20 mm ----Paintwork: * Reflective contour tape at sides and rear * Chassis, turntable, access ramps and folding outriggers hot-dip galvanized * Axles, drawbar, air tanks and turntable painted in black tone ----Info: * New vehicle with manufacturer warranty * Errors and prior sale reserved * Sample images may show special equipment ----Lead time: * Vehicle available from approx. week 23/2026

Stanje: novo, največja dovoljena obremenitev: 10.900 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, * KA-TA-R 14.4 ----Braking system: * Wabco EBS * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer unit Laodpfxel Th A Ee Aicsc ----Drawbar / Flange Towing Eye: * Height-adjustable (approx. 300 mm), hot-dip galvanized drawbar with 40 mm flange towing eye ----General Attachments: * Jost mechanical landing gear at the front * 2 mechanical, hot-dip galvanized folding supports at the rear * Hot-dip galvanized bolted underrun protection * Toolbox made of galvanized steel sheet, mounted on the right side * Plastic quarter mudguards * Two-step entry on the left side as access aid ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin electrical connector * LED tail lights ----Tipper Platform: * Steel pallet three-way tipping body * Continuous side walls at the top with internal tube reinforcement (without central stanchions), foldable using drop side spring lifters * Rear wall foldable and pendulum-mounted, with manual central locking * Hot-dip galvanized, bolted rear stanchions * 4 mm fine-grain steel floor plate * Mesh hooks, rear mounting rail for drive-on ramps * Prepared for later retrofitting with side wall extensions ----Chassis: * Hot-dip galvanized chassis ----Load Securing: * Each corner with 1 x 5 t lashing ring and each side with 4 x 3 t lashing rings embedded in the outer frame ----Aluminum Drive-on Ramps: * 1 pair of aluminum drive-on ramps approx. 3,570 x 400 mm (load capacity 8 t/pair) suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading platform integrated in the chassis, accessible from the rear ----Tires: * 385/55 R 22.5 tires ----Painting / Coating: * Axles, springs, air tanks, and landing gear painted in black * Chassis, drawbar, floor, front wall, and folding supports hot-dip galvanized * Sidewall finish in RAL 9010 pure white * Side wall painting in other RAL colors available at extra cost ----Info: * Reinforced superstructure with load securing certificate according to EN 12642 XL * New vehicle without initial registration with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 29/2026

Stanje: novo, največja dovoljena obremenitev: 38.620 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, T5 Profile 50.0: ----Brakes: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height +30 mm when axle is lifted) * Last axle self-steering (lockable from the driver's cab for maneuvering purposes without the need for truck-side installation; additionally lockable via switch on trailer). Deactivate the lock before driving on public roads. * Forced lifting and lowering of the lift axle for maneuvering purposes (truck-side installation required), with speed-dependent control via EBS electronics ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: * Drawbar, 1,500 mm long with 50 mm towing eye and manual height adjustment ----Electrics / Lighting: * Smartboard as infotool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with indication in the truck via EBS signal (no truck-side installation necessary) * LED lighting system 12/24 V * Removable rear LED beacon ----General Accessories: * Mechanical warning plate kit for 3 m total width * Tool box made of galvanized sheet steel approx. 650 x 300 x 600 mm, mounted side left * Front axle with plastic mudguards, rear with galvanized steel mudguard skirts ----Low Loader Platform: * Front section of turntable platform with 45° angles and 3 storage compartments with lockable, rear-hinged covers * Shortening of the lowbed platform by 500 mm to 6,280 mm including extended step by 500 mm to the front * Rubber covering on folding frame, drive-on ramp and running surface of the low-loader platform * Bamboo wood between the longitudinal beams in front of the excavator arm rest ----Load Securing (LaSi Package): * 2 x 6.4 t lashing rings at front corners * 2 x 13.4 t UVV lashing points each at side front and rear corners * 5 x 10 t UVV lashing rings per side (pivoting and lowerable, loadable in all directions) * 4 stake pockets per side with additional 2 t lashing capability each * 1 x 16 t UVV lashing ring on the rear cross member Ljdpfol Tihuox Aiceac ----Widening: * Extendable and foldable widening outriggers for 3 m total width (beam holders under chassis, right side) ----Excavator Arm Rest: * Continuous excavator arm rest with reinforcement profile from last axle to tow bar approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on sides of arm rest ----Ramps: * Hydraulic folding ramp with dual-line hydraulics and extendable tip piece approx. 4,650 x 720 mm including load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (required in case of hydraulic pump output on truck over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm via air suspension ----Platform Dimensions: * Platform over turntable: 2,600 + 390 x 2,520 mm * Lowbed platform: 6,280 + 500 x 2,520 mm incl. 860 mm inclines ----Paintwork: * Chassis, turntable, drawbar, widening consoles, and ramps hot-dip galvanized * Tow bar, axles, hydraulic axle supports, and air tanks painted in black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately*

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle hydraulically steered with electro-pneumatic steering lock ----Suspension: * Air suspension with lift and lower function as well as RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on trailer as info tool with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting system 12/24V * Removable LED flashing beacon, rear left ----General attachments: * Side underrun protection * Landing gears in the front and mechanical swing supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder mounted on the chassis, right-hand side ----Low-loader platform: * Fifth wheel platform with 45° chamfered front corners and front toolbox made of galvanized steel, width = 2,480 mm x height = 500 mm x length = 665 mm, with folding lid * 400 mm high aluminum sideboards (RAL 9010 pure white) on both sides of the fifth wheel platform, foldable and removable * Rear wall – 150 mm high, slotted in * Rear slope on the fifth wheel platform down to the low-bed area, approx. 700 mm long * Fifth wheel platform fitted with 50 mm wooden planks, low-bed area with 60 mm wooden planks * Tread plate above the axles ----Width extensions: * 8 x mechanical folding width extensions to a total width of 3 m, except in the rear slope area (extension planks available with storage on the fifth wheel platform) * Mechanically adjustable warning sign packages front and rear ----Load securing (lashing package): * On the fifth wheel platform, 2 x 6.3 t lashing eyes each as well as 3 x 5 t lashing bars on each side in the outer frame * In the low-bed area, 2 x 13.4 t lashing rings on each side as well as 4 x 10 t lashing rings, swiveling and retractable, integrated into the outer frame * 2 x 6.4 t lashing eyes on each side and 1 lashing eye at the rear in the excavator trough * 2 x container locks directly after the kick-up section in the low-bed platform ----Excavator trough: * Excavator trough from end of last rigid axle over steering axle up to the end brace, continuous, with internal reinforcement profile, approx. L = 2,450 mm x W = 770 mm x D = 270 mm ----Ramps: * Mechanically single-piece, hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for later customer-side retrofitting of hydraulic ramp shifting * The outer board of the ramp is made from 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump capacities in the truck from over 40 l to 120 l/min) ----Loading dimensions: * Loading area of fifth wheel platform: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm approach slope) ----Coupling height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, ramps, rear swing supports, extension consoles hot-dip galvanized * Axles, landing gears, air tanks painted in black tone * Vehicle is hot-dip galvanized Laodpfx Aiol Tnvgjcjc ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images may contain equipment not included with the offered v

Stanje: novo, največja dovoljena obremenitev: 38.620 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, T5 Profile 50.0: ----Braking System: * Wabco EBS (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (when lifted, ride height +30 mm) * Last axle is self-steering (lockable from the cab for maneuvering purposes without any installation on the truck side, and additionally via a switch on the trailer). The lock must be disengaged before driving on public roads. * Forced lifting and lowering of the lift axle for maneuvering (truck-side installation required), with speed-dependent control via the EBS electronics ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: Drawbar 1,500 mm long with 50 mm draw eye and manual height adjustment ----Electrics / Lighting: Lajdpfx Ajxptn Dsicoc * Smartboard as an info tool with pressure sensors for axle load indication per axle group * Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation) * LED lighting system 12/24 V * LED rotating beacon (removable), rear ----General Fittings: * Mechanical warning sign set for 3 m total width * Toolbox made of galvanized steel plate approx. 650 x 300 x 600 mm, mounted left side * Plastic fenders front axle and galvanized steel mudguards rear axle ----Low Loader Platform: * Front section of turntable platform with 45° corners and 3 stowage compartments with lockable folding lids (folding towards the rear) * Shortening of the low-bed platform by 500 mm to 6,280 mm including extended recess by 500 mm at the front * Rubber covering on the folding frame, approach ramp, and running surface of the low-loader platform * Bamboo wood between the longitudinal beams, in front of the excavator stick rest area ----Load Securing (LaSi Package): * 2 x 6.4 t lashing eyes in the front corners * 2 x 13.4 t UVV lashing points on each side in the front and rear corners * 5 x 10 t UVV lashing rings on each side (swivelable and lowerable, loadable in all directions) * 4 stake pockets per side with simultaneous 2 t lashing option * 1 x 16 t UVV lashing ring on the rear crossmember ----Width Extension: * Extendable and foldable width supports for 3 m total width (plank holder under the chassis, right side) ----Excavator Stick Rest: * Continuous excavator stick rest with reinforcement profile from last axle to end beam approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides of the excavator stick rest ----Ramps: * Hydraulic folding ramp with dual-circuit hydraulics and folding tip approx. 4,650 x 720 mm, including load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump outputs on the truck over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm adjustable via air suspension ----Loading Area Dimensions: * Platform above turntable: 2,600 + 390 x 2,520 mm * Low-bed loading platform: 6,280 + 500 x 2,520 mm, incl. 860 mm approach ramp ----Paintwork: * Chassis, turntable, drawbar, width extension consoles, ramps hot-dip galvanized * Drawbar yoke, axles, hydraulic axle supports and air tanks painted in black ----Information: * New vehicle with manufacturer warranty * Subject to prior sale and errors ----Delivery Time: Available immediately*