Fliegl 3-Achs Chassis 40 Ft Mit Container Hc, Side Open nakup rabljenega (55.417)

Stanje: novo, največja dovoljena obremenitev: 26.500 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.450 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, WIESE 3-axle low-loader with ramps and wheel recesses ? NEW Availability approx. 4 months from order ---- Vehicle data Manufacturer: WIESE * Type: WSA 3-36 TL * Year of manufacture: 2025 * Axles: 3 * Gross weight: 39,000 kg * Fifth-wheel load: 12,000 kg * Aggregate axle load: 27,000 kg * Unladen weight: approx. 9,500 kg * Tyres: 235/70 R17.5 * Brakes: WABCO EBS with RSS ---- Dimensions * Load bed length: 13,450 mm * Low-bed length: approx. 9,550 mm * Fifth-wheel section: approx. 3,640 mm * External width: 2,550 mm * Bed height low-bed: approx. 920 mm * Fifth-wheel height: approx. 1,250 mm ---- Equipment * 3 x SAF axles (9 t) with air suspension * 1st axle with lift function * 3rd axle with trailing steering axle (lockable) * Electronic air suspension E-TASC * WABCO EBS brake system with Roll Stability Support * Tyre pressure monitoring system for 12 tyres * Full LED lighting * 4 x LED work lights * 15-pin + 2 x 7-pin sockets ---- Bodywork * Sturdy steel frame * 28 mm hardwood floor / Omega floor * 13 pairs of lashing rings 8,000 kg * Additional lashing points 5,000 daN * 2 pairs of wheel recesses * Digger arm recess * Aluminium plug-in side boards on the raised deck * Toolbox at the front ---- Ramps * 2 x aluminium drive-on ramps * Dimensions: approx. 2,800 x 600 mm * Load capacity: 27,460 kg * Spring lifting system * Sideways adjustable ---- Miscellaneous * Warning boards for overwidth up to 3 m * Contour marking in accordance with ECE-R48 * Technical documentation and TÜV certificate For further information, we are happy to assist you. Gsdpfeyuq Igjx Acgebl

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, 20-foot Open Side Container (HC version available at an additional charge; EUR 250 net) Wind and watertight Smooth-operating double-wing doors Wooden floor With valid CSC plate Double-wing doors on the long side Technical Data: External dimensions (LxWxH): 6,058 x 2,438 x 2,591 mm External dimensions HC (LxWxH): 6,058 x 2,438 x 2,890 mm Internal dimensions (LxWxH): 5,898 x 2,288 x 2,299 mm Internal dimensions HC (LxWxH): 5,898 x 2,288 x 2,600 mm Door opening, front (W): 2,300 mm Door opening, long side (W): 5,702 mm Volume: 33 m³ Tare weight: 3.18 tons Gbedpjw A I Hqsfx Acgol Payload: up to max. 20 tons Container transport can be arranged with our own company fleet. Viewings are possible at our site in 48465 Schüttorf, Monday to Friday between 9 am and 5 pm or by appointment. We are happy to provide you with a tailored quotation.

Stanje: dober (rabljeno), konfiguracija osi: 2 osi, prva registracija: 11/1979, vzmetenje: jeklo, barva: oranžna, Leto izdelave: 1979, Znamka osi: ROR Zavore: bobnaste zavore Vzmetenje: listnate vzmeti Lastna masa: 3.680 kg Nosilnost: 27.820 kg Dovoljena skupna masa: 31.500 kg Tehnično stanje: dobro Vizualno stanje: dobro Za več informacij se obrnite na Arieja. = Druge možnosti in oprema = Gbsdpfx Ajyl Udyscgjl - Listnato vzmetenje

Stanje: novo, največja dovoljena obremenitev: 27.760 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prostornina tovornega prostora: 25 m³, Leto izdelave: 2026, Brakes: * Wabco EBS-E (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes 420 x 180 mm * Paver brake with shortened rear mudguards and manual paver switch ----Axle: * 3 x 9 t BPW axles * 1st axle liftable with traction aid ----Suspension: * Air suspension with automatic lowering during the tipping process (for increased stability; can be deactivated for overhead pavers) ----Electrics / Lighting: * Smart-Board (lift and lowering system, lifting axle lowering, traction aid, odometer, axle load indicator, ECAS, error memory reading) * Tire pressure monitoring system (TPMS) * 1 x 15-pin trailer socket * Eco-LED II lighting with protective cover * 1 x additional LED work lamp * Flashing side marker lights ----General attachments: * Aluminium air tanks * Telescopic steel landing legs with plate foot (can only be unhitched when empty) * Enclosed plastic single mudguards * 4 m aluminium access ladder, stored on the right side over the mudguards * Folding underrun protection * Rear tow eye ----Chassis: * High chassis frame made of high-tensile fine grain steel, heavy-duty version ----Tipping body: * Semi-round steel rear tipper body, complete, made of STEELECT 450 steel -HBW 450- * Side walls with robust, continuous, inward-angled top belt * Outside access and aluminium platform in front of front wall ----Thickness of floor, side walls, front and rear wall: * Front and rear wall inclined * Front and rear wall 5 mm * Side walls 6 mm * Floor 8 mm, HBW 450 steel ----Hydraulic ram: * Front hydraulic ram with medium working pressure ----Hydraulic tailgate: * Overlapping hydraulic and swinging tailgate * Control of hydraulic tailgate via mechanical ball valve ----Tarpaulin: * Manual roll-up tarpaulin - RAL 9006 white aluminium ----Loading volume: * Approx. 25 m³ ----Fifth wheel height: * Unladen approx. 1,340 mm * Laden approx. 1,330 mm ----Paintwork: * Chassis painted RAL 7021 black grey * Tipping body RAL 9006 white aluminium ----General information: * --Technical gross weight of up to 39,000 kg possible-- * Subject to errors and prior sale * New vehicle with manufacturer's warranty Gbodpfsw Eg Edex Acgol ----Delivery time: * Available from week 11/2026

Stanje: rabljeno, konfiguracija osi: 2 osi, prva registracija: 04/1996, barva: drugo, Leto izdelave: 1996, Os 1: levo 12 mm, desno 12 mm Os 2: levo 12 mm, desno 12 mm Os 3: levo mm, desno mm Godsutbcwspfx Acgebl Možnost zlaganja prikolic! = Več informacij = Lastna teža: 3.200 kg

Stanje: rabljeno, konfiguracija osi: 2 osi, prva registracija: 05/1988, barva: drugo, Leto izdelave: 1988, Os 1: levo 5 mm, desno 12 mm Os 2: levo 5 mm, desno 5 mm Os 3: levo mm, desno mm Možnost zlaganja prikolic! = Več informacij = Gbodpfour Srmex Acgel Lastna teža: 3.590 kg

Stanje: novo, največja dovoljena obremenitev: 28.640 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.600 mm, širina tovornega prostora: 2.300 mm, višina nakladalnega prostora: 1.500 mm, prostornina tovornega prostora: 25 m³, Leto izdelave: 2026, Oprema: ABS, Brake system: * Wabco EBS-E / ABS (electronic braking system with RSS) * Emergency release device for spring-loaded cylinders * 22.5" disc brakes * Paver brake with shortened rear mudguards and manual paver switch ----Axle: * 3 x 9 t BPW axles * Lift axle with traction aid ----Suspension: * Air suspension with automatic lowering during tipping process (to increase stability, disconnectable for overhead paver) ----Electrics / Lighting: * Tire pressure monitoring system (TPMS) * 1 x 15-pin trailer socket * 5-chamber tail lights with protective housing * 1 x additional LED work spotlight * Flashing side marker lights ----General Attachments: Gbsdpjxxf Twefx Acgol * Aluminum air tanks * Jost telescopic steel landing legs with plate foot (uncoupling only when unladen) * 4 m aluminum leaning ladder stowed on the right side above the mudguards * Closed single plastic mudguards * Folding underrun protection * Rear towing eye * Folding access ladder at the front left side * Document box on the front wall ----Chassis: * Chassis made of high-tensile fine-grain steel with Meiller-specific torsional cross members ----Tipping Body: * Semi-circular steel rear tipping body * Front wall with 600 mm front roof as tarpaulin support * Side walls with robust, continuous, inwardly sloped top rail * Front and rear walls angled ----Thickness of floor, side walls, front and rear wall: * Front wall: 4 mm BS 70 steel * Tailgate: 4 mm HBW 400 steel * Side walls: 4 mm HBW 450 steel * Tailored floor: 5 / 6 mm Hardox 450 steel ----Hydraulic Cylinder: * Front hydraulic cylinder with medium working pressure ----Hydraulic Rear Wall: * Overlapping hydraulic and pendulum rear wall. Control of the hydraulic rear wall via mechanical ball valve block ----Tarpaulin: * Electric sliding tarpaulin -RAL 9006 white aluminium- with switch on the chassis and remote control ----Loading volume: * approx. 25 m³ ----Fifth-wheel height: * Unladen approx. 1,247 mm * Laden approx. 1,217 mm ----Paintwork: * Chassis painted in RAL 7021 black grey * Tipping body in RAL 9006 white aluminium ----General Information: * --Permissible total weight of 39,000 kg technically possible-- * Subject to prior sale and errors * New vehicle with manufacturer’s warranty * Sample images ----Delivery time: * available immediately from Egestorf

Stanje: rabljeno, prva registracija: 12/2010, Leto izdelave: 2010, Schwarzmüller kratek ADR 3-osni kontejnerski podvozje za posebne posode za kisline • ABS • zračno vzmetenje • 3 x Mercedes – 9 t osi • 1. os dvižna • Dvižno/spustna naprava • Pnevmatske gume: 385/55 R 22.5 • Lastna masa: 3.650 kg • Skupna teža: 36.000 kg (tehnično možno do 39.000 kg) Gedpjwmn U Ajfx Acgebl • Mere: 8.200 x 2.550 mm - nemška polprikolica - TÜV / tehnični / posebni pregled na zahtevo in z doplačilom: novo! Pridržujemo si pravico do napak in predčasne prodaje!

Stanje: rabljeno, skupna masa: 35.000 kg, lastna masa: 4.710 kg, Oprema: hladilna enota, CONTAINER TYPE: 40-foot High Cube, Carrier and Thermo King refrigeration units, year of manufacture 2010 to 2013 Please let us know which year of manufacture you are particularly interested in, so we can send you specific photos. All prices are quoted as net amounts + 19% VAT. Rental is also possible: from €6.00 net per day + 19% VAT. DELIVERY CONDITION: * PTI OK (Pre-Trip Inspection always newly performed before delivery, verified by our specialist personnel) * Fully operational / plug-and-play * Wind- and watertight * CSC certificate (certified safety standard, this plate regulates the safe use of containers) TECHNICAL SPECIFICATIONS: Floor type: T-floor Power supply: 380/440 V, 32A, 50Hz / 60Hz with 5-pin CEE plug for stationary operation Interior: stainless steel/aluminum, suitable for food use Average power consumption: 3-8 kWh Adjustable temperature range: -25 ... +25 °C (ideal for both heating and cooling) Refrigerant: R134A / R449A DIMENSIONS: External length: 12,192 mm External height: 2,896 mm External width: 2,438 mm Internal length: 11,599 mm Internal height: 2,545 mm Internal width: 2,290 mm Optional Extras: LED lighting installation (complete set) – €850.00 + 19% VAT PVC curtain, fixed – €590.00 + 19% VAT Shortening to desired length – upon request Installation of aluminum flat floor – upon request Installation of a side deep-freeze cell door – €1,200.00 + 19% VAT Access ramp (solid steel construction) – €980.00 + 19% VAT TRANSPORT SOLUTION: Gsdei Aa Rzspfx Acgobl Do you require a transport solution? We are happy to arrange delivery of your container by standard or crane truck and set it up at your location. Please contact us for a quote! All refrigeration units are serviced and of excellent quality and performance. The images shown are for reference only; the actual product may differ. We look forward to hearing from you! BIMICON Container Service Your specialist from Hamburg Your trust in the quality of our family business from Hamburg since 1996.

Stanje: novo, lastna masa: 8.900 kg, največja dovoljena obremenitev: 40.100 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 8.900 kg, Chassis: - Robust welded steel frame construction with front frame lowering and level loading platform, rear chamfer approx. 500x100 mm - Neck height 200 mm with chamfered front corners - Chamfered end swan neck approx. 500 x 100 mm (traction ribs on the outer frame in the area of the rear chamfer) - 2 kingpin positions with replaceable 2” kingpin - Outer frame closed to the outside as perforated outer frame - Loading platform with extendable central frame, extendable by approx. 2,000 mm, lockable pneumatically every 500 mm - Frame before and after extension with 80x80 mm step - Reinforced frame design / point load focused in the retracted state - Without extendable loading platform widenings, however, prepared for retrofitting (=guiding tubes welded into the frame) - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting after the 2nd axle, extending to the end of the vehicle - 1 pair of wheel recesses between 1st and 2nd axle with steel covers (covers coated with Körapur), depth approx. 400 mm - Underrun protection = extended end plate - Drop support legs at the rear Axles, Steering and Tyres: - BPW air suspension axles, each with 10 t axle load, air bellows diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lifting and lowering device with total lift approx. 200 mm - 2nd driving position via ball valve +50mm - 1st axle lift axle (wired to EBS), confirmation fully automatic with manual emergency activation via button on semi-trailer - 3rd axle as friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, centered by offset - 12 tyres 245/70 R 17.5 143/141J, tubeless - Including tyre pressure monitoring Accessories: Gbodpfx Asxnnk Docgol - Plug-in side and rear boards on swan neck, approx. 400 mm high - Spare wheel holder - Side aluminium underrun protection - 4 wheel chocks with holder - Elongated number plate holder in end plate - 1 removable ECE sign at the rear - 11 pairs ZK modules 10t, on the side: - 2x on the swan neck - 2x on the loading platform in front of the extension - 7x after the extension - Extendable warning signs including 3 position lamps each, front at landing gear and rear before end plate, steplessly extendable up to loading width 4,500 mm - 4 plug-in holders for warning signs in stake pockets on loading platform - 6 pairs of stake pockets on the side for plug-in stakes 100x50 mm - 2 transverse rows of stake pockets for plug-in stakes 100x50 mm on the swan neck from the outer frame to the main frame (1x in front of and 1x after the kingpin positions) - 3 transverse rows of stake pockets for plug-in stakes 100x50 mm on the loading platform from outer frame to main frame (1x in front of the extension, 1x after the extension and 1x after the 3rd axle) - 2 pairs of steel plates in the loading platform for container locks to accommodate 1x 20ft container - Rubber apron mounted on underrun protection Optional: The trailer is available with ramps.

Stanje: novo, lastna masa: 8.490 kg, največja dovoljena obremenitev: 40.510 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 8.490 kg, Oprema: ABS, Chassis: - Robust welded steel frame structure with front frame drop and flat loading platform with rear bevel, approx. 500x100 mm - Gooseneck height 200 mm with beveled corners - Gooseneck end with bevel approx. 500 x 100 mm (traction ribs on outer frame in the area behind rear bevel) - 2 kingpin positions with interchangeable 2" kingpin - Outer frame closed outwards as slotted rail for lashing with tie-down straps - Reinforced frame design / point load at center of gravity - Provisions for extendable deck wideners - With excavator trough (without cover), approx. 220 mm deep, 600 mm wide, starting after the 2nd axle to end of vehicle - 1 pair wheel recesses in front of the axle with steel covers (covers with Körapur coating), approx. 400 mm deep, plus 1 pair wheel recesses between the 1st and 2nd axle with steel covers - Underride protection = extended end plate - Hydraulic drop-down supports at rear Gsdpfx Aswu A Sljcgjbl Floor: - 35 mm larch timber floor with aluminum omega profiles Axles, Steering, and Tyres: - BPW air suspension axles, each rated at 10 t axle load, bellows diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - Lifting and lowering device, total lift approx. 200 mm - 2nd driving height via ball valve +50mm - 1st axle lift axle (wired through EBS), fully automatic actuation with manual emergency actuation via button on trailer - 3rd axle as friction-steered trailing axle with electric and mechanical locking - 12 steel disc wheels, 10-hole, hub-centered - 12 tyres 245/70 R 17.5 143/141J, tubeless - Incl. tyre pressure monitoring system Braking System: - Dual-line brake system with EBS-E including RSS - EBS (WABCO 4S3M) - Spring-loaded parking brake - Pneumatic connection yellow/red Paintwork: - Steel shot blasting, spray galvanising of chassis and primer - Painting of chassis/wheel hubs/outer frame in DB 7350 Novagrau Accessories: - Removable side and rear boards on the gooseneck, approx. 400 mm high - Spare wheel holder - Side aluminum underrun protection - 4 wheel chocks - Steel fenders with Clear-Pass - Long license plate holder in end plate - 1 removable ECE plate at the rear - 11 pairs ZK modules 10t lateral: - 2x on the gooseneck - 9x on the loading platform - Without rear towing eyes - Extendable warning signs including 3 position lamps each, front at landing legs and rear in front of end plate, steplessly extendable up to 4,500 mm load width - 4 insertable sockets for warning signs in stake pockets on loading platform - 6 pairs stake pockets along sides for 100x50 mm stakes - 2 cross rows of stake pockets for 100x50 mm stakes on the gooseneck from outside frame to main frame (1 before and 1 after kingpin positions) - 3 cross rows of stake pockets for 100x50 mm stakes on loading platform from outer frame to main frame (1 in front section, 1 before 1st axle, 1 after 3rd axle) - 2 pairs steel plates on loading platform for container locks to accept 1x 20ft container - Rubber skirt mounted on underrun protection - Preparation (cable routing for NATO cable and hole pattern for subsequent mounting of NATO socket at front of end plate and bracket on vehicle) for optional retrofit of electrohydraulic power unit at right rear for potential operation of access ramps - Mechanical 24-ton stabiliser landing gear with single-sided operation and compensating shaft Optional: Trailer available with aluminum folding ramps.

Stanje: novo, lastna masa: 17.500 kg, največja dovoljena obremenitev: 43.500 kg, skupna masa: 61.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.550 mm, širina tovornega prostora: 2.750 mm, višina nakladalnega prostora: 400 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading platform length, approx. 3,750 mm long - Gooseneck hydraulically liftable/lowerable and detachable - For tractor units: 6x4 or 8x4 Lowbed: - Lowbed with external beams, extendable version, "SUPER LOW" design, approx. 7,550 mm long - Lowbed with fixed hardwood floor approx. 40 mm thick and mechanical locking device - Service lines are protected within the extendable beams and automatically adjust to the lowbed length Rear Undercarriage: - Rear chassis with closed outer frame, checker plate cover, and continuous prism-shaped excavator trough approx. 1,450/900 x 505 mm, open at the rear - 2 pairs of stake pockets for 100 x 50 mm insertable stakes in the outer frame Axles and Tires: - "PENDULUM AXLE", all axles hydro-mechanically forced-steered - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and locking pins for securing in raised position - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres 245/70 R 17.5 / 3PMSF Included Accessories: - Prepared for bolt-on container positioning for 1x 20ft or 1x 40ft container on the outer beams - 2" kingpin - Galvanized steel front wall approx. 400 mm high - One spare wheel with holder Gbedpfoh Hm Thsx Acgol - At the galvanized front adapter bar yellow-red air couplings - 4 wheel chocks - Remote rear steering from front and rear via cable remote control with pushbuttons, including single-track monitoring for axles - Hydraulic line connections from gooseneck to lowbed with multi-coupling instead of screw coupling - Electro-hydraulic power pack - White reflective tape to EU specifications on sides, extension, and rear red - 2 wooden blocks 500x250x200 mm - European reflective plates (red-yellow) on the trailer rear - At the gooseneck and rear wall left and right each a bracket for warning boards including socket - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard grease NLGI-2 - Load gauge for determination of axle loads including load diagram - On the gooseneck, plug-in ALU side and rear boards approx. 2,000 x 400 mm - The rear galvanized insert posts are removable (body length approx. 2,120 mm) - Separate air connection for air gun on the gooseneck - Duomatic air coupling from gooseneck to lowbed - Rear upper section of gooseneck closed with removable cover - 1 pair of steel ramps to bridge the lowbed's pick-up hooks - Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm - Wireless remote control for rear steering in addition to cable remote, with signal lights at receiver for single-track monitoring - 6 pairs of threaded blocks between lashing rings under the top chord on the outer beams for mounting screwable RUD rings VLBG-4 - 7 pairs of stake pockets for 100 x 50 mm insertable stakes in the outer frame of the loading bed - Foldable extensions, approx. 230 mm per side - Loading area features a painted sand layer for anti-slip protection - Dipper stick trough of rear chassis closed at front and rear with plug-in plates - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible surfaces hot-finished with ZINACOR 850 metallization (zinc 85% - alu 15%)

Stanje: novo, največja dovoljena obremenitev: 37.390 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-up aid for maneuvering purposes switched to the first axle via EBS (no installation required on the truck side) * Rear axle as self-steering axle with electro-pneumatic steering lock * Locking of the self-steering axle from the driver's cab for maneuvering purposes, controlled via EBS (no installation required on the truck side) ----Suspension: * Air suspension with lifting/lowering device and Ride-to-Return valve ----Electrics / Lighting: * Smart Board mounted on the trailer as an information tool with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12/24 V Gjdpfx Asq Euakscgobl * LED rotating beacon (removable) at the rear * 2 additional LED reversing lights * 7-pin socket at rear for extended length lighting * Side marker lights with indicator signal control * Tyre pressure monitoring system with display option in the truck via EBS signal (no installation required on the truck side) ----General equipment: * Side underrun protection * Landing gears at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall crossmember (without spare wheel) * Mechanically adjustable warning sign packages at front and rear * Swing arm as carrier for connecting cables from truck to semi-trailer ----Low loader deck: * 2nd king pin position * Fifth wheel platform with 45° chamfered front corners and front tool box made of galvanized powder-coated sheet steel B = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm high aluminium side boards (in RAL colour of choice) on the sides of the fifth wheel platform, foldable and removable * Rear wall -150 mm- high plug-in * Rear slope on fifth wheel platform to low bed approx. 700 mm long with tread plate covering and at the end a perforated strip for attaching aluminium loading ramps * Fifth wheel platform with 50 mm clamped wooden planks and low bed platform with 60 mm clamped wooden planks * Tear plate above the axles * 9 x mechanical folding extensions to 3 m overall width, but not in the rear slope (extension planks available with closed storage compartment across the direction of travel under the loading floor) * 3 mounting shafts under the fifth wheel platform for storage of optional aluminium loading ramps or wooden planks for wheel well coverings ----Load securing (LaSi package): Fifth wheel platform: * Perforated outer frame angled at 45° with hole pattern for lashing points (2 t lashing capacity per point at a minimum spacing of 480 mm) * 3 x 13.4 t lashing rings each side recessed in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal beams after the drop, 1 x above the centre axle next to the longitudinal beam) Low loader platform: * 3 x 13.4 t lashing rings each side on the outer frame (1 x beginning of the drop on the fifth wheel platform, 1 x beginning of the ramp slope, 1 x end of the ramp slope) * 2 x 10 t lashing rings each side (1 x between front wheel well and 1st axle, 1 x between 2nd and 3rd axle) * 3 x 5 t lashing rings each side bolted to the outer frame of the wheel wells (2 on the front wheel well, 1 on the rear wheel well) ----Excavator arm recess: * Extended excavator arm recess from end of last fixed axle through to steering axle up to rear crossmember, continuous with

Stanje: novo, največja dovoljena obremenitev: 37.390 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Traction aid for shunting purposes engaged on the first axle via EBS (without truck-side installation) * Last axle as trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle from the driver's cab for shunting via EBS (without truck-side installation) ----Suspension: * Air suspension with lifting and lowering function as well as RtR valve ----Electrics / Lighting: Gbjdpfxstpta Do Acgsl * Smart Board mounted on trailer as info tool with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting 12 / 24 V * LED rotating beacon (removable) at the rear * 2 extra LED reversing lights * 7-pin socket at the rear for additional length lighting * Side marker lights with indicator activation * Tire pressure monitoring system with display option in the truck via EBS signal (without truck-side installation) ----General attachments: * Side underrun protection * Landing gears at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the headboard crossmember (without spare wheel) * Mechanically adjustable warning sign packages at the front and rear * Swivel arm as carrier for connection cables from truck to semi-trailer ----Lowbed platform: * Second kingpin position * Fifth wheel platform with 45° bevelled front corners and front toolbox made of galvanised, powder-coated steel sheet, W = 2,480 mm x H = 500 mm x L = 665 mm with folding lid * Side aluminium drop sides, 400 mm high (in RAL custom colour), foldable and removable * Rear wall -150 mm- high plug-in * Rear slope on the saddle platform to the lowbed approx. 700 mm long with chequer plate covering and a perforated strip at the end for attaching aluminium loading ramps * Fifth wheel platform with 50 mm clamped wooden planks and lowbed platform with 60 mm clamped wooden planks * Tread plate over the axles * 9 x mechanical folding wideners to 3 m overall width, not in rear slope (widening planks available with sealed crosswise storage compartment under the loading area) * 3 mounting shafts under the saddle platform for the storage of either aluminium loading ramps or wooden planks for wheel well covering ----Load securing (LaSi-package): Fifth wheel platform: * Perforated outer frame, 45° angled, with hole pattern for lashings (2 t lashing capacity per tie-down point at a minimum spacing of 480 mm) * 3 x 13.4 t recessed lashing rings per side in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal members after the cranking, 1 x above the central axle next to the longitudinal member) Lowbed platform: * 3 x 13.4 t lashing rings per side on the outer frame (1 x at the start of the cranked platform, 1 x at the start of the access slope, 1 x at the end of the access slope) * 2 x 10 t lashing rings per side (1 x between the front wheel well and 1st axle, 1 x between the 2nd and 3rd axle) * 3 x 5 t lashing rings per side bolted to the outer frames of the wheel wells (2 at the front wheel well, 1 at the rear wheel well) ----Excavator arm rest: * Extended excavator arm rest from end of last rigid axle over steering axle to end crossmember, continuous with internal reinforcing profile approx. W = 770 mm x D rear = 270 mm / D front = 170 mm * 2 x 6.4 t lashing rings per side in the exca

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 05/2004, barva: drugo, Leto izdelave: 2004, Os 1: levo 8 mm desno 8 mm Os 2: levo 8 mm desno 8 mm Gedpfx Aoynhvuocgebl Os 3: levo 8 mm desno 8 mm Možna je zložitev prikolic eno na drugo! = Več informacij = Prazna teža: 4.740 kg

Stanje: novo, največja dovoljena obremenitev: 17.650 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.230 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TP 30.0 with 3 cable drum supports ----Braking system: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lifting and lowering function ----Drawbar: * Drawbar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option via EBS signal in the truck cabin – no installation required on the truck side * 15-pin power connector * 2 additional LED reversing lights (switched via reverse gear) * LED lighting ----General Fittings: * Aluminum air reservoir * Stainless steel tool box, approx. 1,000 x 300 x 600 mm, mounted on the side * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Flatbed: * Zurr-fix outer frame, 45° angled, drilled for lashing equipment, lashing capacity per lashing point 2,000 kg at 480 mm intervals * Installation of 3,000 kg drop lashing rings possible at approx. 600 mm intervals – 12 pcs 3,000 kg lashing rings per side included * 5 pockets per side for pipe stakes (100 x 50 mm) in the outer frame (stakes not included) * 30 mm phenolic plywood floor ----Drum Supports: * 3 galvanized drum supports, secured by container locks, with side forklift pockets, center/center 800 mm (pocket width 185 mm) * Maximum drum diameter 2,600 mm and maximum drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with transverse brace * Maximum drum weight per support 6,000 kg * Without drive and drum brake * Support arm with tension lock for securing the drum shaft * Steel drum shaft, 76 mm diameter, with centering and rotatable ends * 2 collar rings Gbjdjx Nlkaopfx Acgel * 2 centering cones made of polyamide * 4 pcs 3.2 t lashing eyes on the support arms for customer-provided drum securing against turning and unspooling ----Loading height: * Approx. 1,040 mm when loaded ----Coating: * Chassis, bogie, drawbar, outer frame, rear under-run protection hot-dip galvanized * Axles painted in a black shade

Stanje: rabljeno, številka stroja/vozila: XLRASM4300G125862, prevoženi kilometri: 600.500 km, moč: 338 kW (459,55 KM), prva registracija: 11/2016, vrsta goriva: dizel, velikost pnevmatike: 315/70 R22.5, konfiguracija osi: 6x2, gorivo: dizel, kapaciteta rezervoarja za gorivo: 620 l, barva: drugo, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: zrak, število sedežev: 2, skupna dolžina: 18.350 mm, skupna širina: 2.500 mm, skupna višina: 3.600 mm, dolžina tovornega prostora: 9.600 mm, Leto izdelave: 2016, Oprema: ABS, klimatska naprava, spojka prikolice, = Additional Options and Accessories = - Lift axle = Notes = Trailer Brand: Krone Model: ZZ18A4EC Width: 250 cm Chassis Chassis height: 100 cm Wheelbase: 480 cm (1-2) 140 cm (2-3) Kingpin / drawbar height: 35 cm Fuel tank capacity: 620 L Coupling brand: Pommier Structure Year of manufacture: 2016 Container construction: 20 ft = Further Information = Axle configuration Tyre size: 315/70 R22.5 Suspension: Air suspension Front axle: Steered; Tyre tread left: 80%; Tyre tread right: 85% Center axle: Twin tyres; Tyre tread outer left: 30%; Tyre tread outer right: 45% Rear axle: Tyre tread left: 25%; Tyre tread right: 45% Weights Unladen weight: 10,116 kg Payload: 16,884 kg Gross vehicle weight: 27,000 kg Max. towing capacity: 44,000 kg Functionality Body manufacturer: Lemasson Extendable body: Yes Identification Registration number: EG294MV = Company Information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock. Gbsdpfx Aox U Duhocgel

Stanje: rabljeno, številka stroja/vozila: VFNTF38CZ32XX1042, prva registracija: 08/2003, velikost pnevmatike: 385/65 R22.5, konfiguracija osi: 3 osi, barva: drugo, vzmetenje: zrak, skupna dolžina: 9.500 mm, skupna širina: 2.500 mm, skupna višina: 1.200 mm, Leto izdelave: 2003, Struktura Višina krožnika: 120 cm Gbedpou H E Dasfx Acgjl Kontejnerska izvedba: 20, 25, 30 ft Šasija Višina podvozja: 100 cm Premer zatiča / sedlo: 2 inča Rezervoar Gorivo: ✓ = Dodatne informacije = Konfiguracija osi Dimenzija pnevmatik: 385/65 R22.5 Znamka osi: SMB Zavore: bobnaste zavore Vzmetenje: zračno vzmetenje Os 1: profil pnevmatike levo: 20%; profil pnevmatike desno: 15% Os 2: profil pnevmatike levo: 25%; profil pnevmatike desno: 15% Os 3: profil pnevmatike levo: 15%; profil pnevmatike desno: 15% Teže Lastna teža: 4.370 kg Nosilnost: 33.630 kg Dovoljena skupna masa: 38.000 kg Funkcionalnost Znamka nadgradnje: General Trailer Višina nakladalne površine: 120 cm Identifikacija Registrska številka: CC269FM = Podatki o podjetju = Za več informacij o tej enoti pokličite: ali pošljite e-pošto: . Popoln pregled zaloge je na voljo na: . Prosimo, ne pozabite se prijaviti na naše e-novice za tedenske posodobitve zaloge.

Stanje: rabljeno, številka stroja/vozila: VGTS322DB38020045, konfiguracija osi: 3 osi, prva registracija: 05/2002, skupna dolžina: 9.500 mm, skupna širina: 2.500 mm, skupna višina: 1.200 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5, barva: drugo, Leto izdelave: 2002, Adr Adr: ✓ Datuma ADR: 2023-03-01 ADR razredi: FL, OX, AT Šasija Aluminijasta platišča: ✓ Višina šasije: 120 cm Premer priklopnega zatiča / sedlaste spojke: 2 inča Zgradba Višina krožnika: 100 cm Kontejnerska zasnova: 20-30 ft Rezervoar Gorivo: ✓ = Dodatne informacije = Konfiguracija osi Dimenzije pnevmatik: 385/65 R22.5 Znamka osi: Saf Zavore: kolutne zavore Vzmetenje: zračno vzmetenje Os 1: profil pnevmatike levo: 15 %; profil pnevmatike desno: 15 % Os 2: profil pnevmatike levo: 20 %; profil pnevmatike desno: 20 % Os 3: profil pnevmatike levo: 15 %; profil pnevmatike desno: 20 % Teže Lastna teža: 4.000 kg Nosilnost: 34.000 kg Največja dovoljena skupna masa: 38.000 kg Funkcionalnost Izdelovalec nadgradnje: Asca Identifikacija Registrska številka: BJ761TP = Podatki o podjetju = Za več informacij o tej enoti nas prosimo pokličite ali pošljite e-pošto. Celoten pregled zalog najdete na: . Ne pozabite se naročiti na naše novice za tedenske posodobitve zalog. Gbsdpfswykq Hsx Acgel

Stanje: rabljeno, številka stroja/vozila: SDCSK31B3AGC63923, prva registracija: 10/2005, velikost pnevmatike: 385/65 R22.5, konfiguracija osi: 3 osi, barva: drugo, vzmetenje: zrak, skupna dolžina: 9.300 mm, skupna širina: 2.500 mm, skupna višina: 1.300 mm, Leto izdelave: 2005, Štruktura Višina krožnika: 120 cm Gradnja zabojnika: 20-30 ft Adr Adr: ✓ ADR-razredi: AF, AT Datum ADR: 2022-08-31 Šasija Višina šasije: 130 cm Aluminijasta platišča: ✓ Premer spojnega zatiča / sedelne sklopke: 2 inča Rezervoar Gorivo: ✓ = Dodatne informacije = Konfiguracija osi Dimenzija pnevmatik: 385/65 R22.5 Znamka osi: Bpwecoplus Zavore: Bobnaste zavore Vzmetenje: Zračno vzmetenje Os 1: dvižna os; Profil pnevmatik levo: 15 %; Profil pnevmatik desno: 20 % Os 2: Profil pnevmatik levo: 25 %; Profil pnevmatik desno: 50 % Os 3: Profil pnevmatik levo: 45 %; Profil pnevmatik desno: 65 % Teže Dovoljena skupna masa (zGG): 39.000 kg Funkcionalno Gbsdpfxju H D E Ne Acgol Znamka nadgradnje: SDC Identifikacija Registrska številka: C194720 = Podatki o podjetju = Za več informacij o tej enoti nas prosimo pokličite ali pošljite e-pošto. Celoten pregled zaloge najdete na: . Ne pozabite se prijaviti na naše novice za tedenske posodobitve ponudbe.

Stanje: rabljeno, lastna masa: 6.020 kg, največja dovoljena obremenitev: 29.980 kg, skupna masa: 36.000 kg, prva registracija: 11/2023, naslednji pregled (TÜV): 05/2026, dolžina tovornega prostora: 9.890 mm, širina tovornega prostora: 2.460 mm, višina nakladalnega prostora: 2.100 mm, prostornina tovornega prostora: 51 m³, vzmetenje: zrak, barva: drugo, Leto izdelave: 2023, vrsta prenosa: drugo, velikost zadnje pnevmatike: 385/65 R 22,5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, Grain tipper with 51 cbm capacity. * 4-fold locking * ABS * Support device * Aluminium rims * Aluminium rims ET 120 * Unladen coupling height 1200 mm * Control box for air suspension * ECAS * Rubber seal * Grain gate * Kingpin 2'' * Single lift axle * Disc brakes * Sloping front wall * Smart Board * Tarpaulin frame * Road chassis frame * Foldable underrun protection We expressly reserve the right to prior sale, as this item is also advertised on other platforms. Accessory specifications are given without guarantee; changes, prior sale or errors excepted. We strongly offer and recommend an inspection and testing to avoid any misunderstanding regarding the condition and suitability of the vehicle by the buyer. Inspections and tests are possible at any time by appointment and are expressly desired. We handle all formalities and deliver the vehicle with the desired transit plates at extra cost. Gbodpfxjyc T H Io Acgol Some images have been edited and serve only as initial examples. If you are interested, please contact us for current photos.

Stanje: rabljeno, številka stroja/vozila: 32602, prva registracija: 01/2005, velikost pnevmatike: 385/65 R22.5, konfiguracija osi: 3 osi, barva: drugo, vzmetenje: zrak, Leto izdelave: 2005, Rezervoar Gorivo: ✓ = Dodatne informacije = Dimenzija pnevmatik: 385/65 R22.5 Znamka osi: Ror Zavore: Bobnaste zavore Vzmetenje: Zračno vzmetenje Os 1: Profil pnevmatike levo: 75 %; Profil pnevmatike desno: 70 % Os 2: Profil pnevmatike levo: 80 %; Profil pnevmatike desno: 90 % Gbedpfsu H Ap Hox Acgol Os 3: Profil pnevmatike levo: 85 %; Profil pnevmatike desno: 60 % Dovoljena skupna masa: 40.000 kg Registrska označba: C209991 = Podatki o podjetju = Za več informacij o tej enoti pokličite: ali pošljite e-pošto: . Celoten pregled zaloge najdete na: . Ne pozabite se naročiti na naše novice za tedenske posodobitve zaloge.

Stanje: rabljeno, največja dovoljena obremenitev: 10.870 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 06/2025, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2023, Oprema: ABS, * KA-TA-R 14.4: * Wabco ABS * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalizing aggregate * Drawbar height adjustable by approx. 300 mm with 40 mm flange towing ring * Jost mechanical landing gear at the front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 650 x 350 x 320 mm, mounted on the front right side of the chassis * 15-pin electrical connector * Multi-chamber tail lights * Bolt-on underrun protection * Plastic quarter mudguards * Net hooks located in the central locking storage areas, plus 2 on the front wall * Chassis made of fine-grain steel * Steel pallet 3-way tipper body with continuous side walls, upper section reinforced with internal tube, without central stakes, fold-down sides with drop-side spring assist * Rear stakes bolted * Combination steel double-wing rear doors, asymmetrically split, can be swung and locked at 270°, not foldable, with additional pivot frame for automatic rear door opening during tipping, locking by galvanized rotary bar lock at the rear and central locking, deactivation function for the automatic rear door when reversing with open swing doors * Each corner with 1 x 5 t lashing point, plus 4 x 3 t recessed lashing rings per side in the outer frame Gjdpfxsl Th Hte Acgsbl * 4 mm fine-grain steel floor plate * Rear guide rails for loading ramps * Reinforced body with load securing certificate * 1 pair of aluminium ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tyred and tracked vehicles * Lockable storage compartment for ramps recessed under the loading area at the rear * Chassis, drawbar, underrun protection, rear stake, rear folding supports hot-dip galvanized * Axles, suspension, air tank, and landing gear painted in black * Tires: 285/70 19.5 * Sideboard paint finish in RAL 9010 pure white * Additional color options for side walls in RAL colors available at extra cost * Vehicle has a day registration (not in use) * Subject to errors and prior sale * Immediately available ex Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 10.870 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 06/2025, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2023, Oprema: ABS, * KA-TA-R 14.4: * Wabco ABS * Emergency release system for spring-loaded cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalizer unit * Drawbar adjustable in height by approx. 300 mm with 40 mm flange towing eye * Jost mechanical landing gear at the front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 650 x 350 x 320 mm front right side on the chassis * 15-pin power socket * Multi-chamber tail lights * Bolted underrun protection * Plastic quarter mudguards * Net hooks installed at each locking point of the central locking system, plus 2 hooks on the front wall * Chassis made of fine-grained steel * Steel pallet three-way tipper body with continuous side walls, internal tube reinforcement, no center posts, foldable with drop-side spring assist * Rear posts bolted * Combination steel wing-door tailgate, asymmetrically split with 2 leaves, can be swung and locked to 270°, not foldable; with additional pendulum frame for automatic tailgate opening during tipping, rear locking with galvanized rotary bolt and central locking system, deactivation function for automatic tailgate function when tipping backwards with open wing door * Each corner fitted with 1 x 5 t lashing ring, and each side with 4 x 3 t lashing points recessed in the outer frame * 4 mm fine grain steel floor plate * Rear mounting rail for loading ramps * Reinforced structure with cargo securing certificate * 1 pair of aluminum loading ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tired and tracked vehicles * Lockable compartment from the rear, recessed under the loading area in the chassis for storing the ramps * Chassis, drawbar, underrun protection, rear post, and rear folding supports galvanized * Axles, springs, air tank, and landing gear painted black * Tires 285/70 R 19.5 * Drop-sides painted RAL 9010 pure white * Sidewall painting available in an RAL color of your choice for an additional charge Gbedpel Th Duefx Acgjl * Vehicle has day registration (unused) * Subject to errors and prior sale * Immediately available from Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 33.000 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2024, naslednji pregled (TÜV): 06/2026, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment. Complete specification upon request. Frame: * Conventional ladder frame in lightweight steel construction with through-bolted cross members * Chassis frame with camber * Cover plate between outer frame and longitudinal member, serving as tire protection for the drive axle of the tractor unit * Fifth wheel plate approx. 8 mm thick with 2-inch kingpin according to DIN 74080 / ISO 337 Running Gear: * Axle lift mechanism on axle 1 * BPW three-axle module ECO Air with disc brakes, approx. Ø 370 mm, ET 120 * Air suspension with approx. 260 mm stroke Vehicle Tires: * 6x 445/45 R 19.5, 160J tires Chassis attachments: * Mechanical landing legs with compensating foot, approx. 24 t lifting capacity, operation on right side in direction of travel * Side underrun protection, tool-free folding, on right and left in direction of travel * Spare wheel mount with winch, incl. 1 wheel fixing kit, mounted behind axle module * Storage for 16 square tube stakes approx. 80 x 80 x 1,990 mm, mounted to the longitudinal member on left and right in the direction of travel * Waterproof plastic toolbox, internal dimensions approx. 545 x 400 x 400 mm, installed rear left in direction of travel * Rear right access ladder, extendable Brake / Air suspension system: * EBS system 2S/2M with stability control (including ABS/ALB function), EBS plug connection ISO 7638, (without connecting lines) * Parking brake with spring accumulator, external pneumatic connectors, as well as external EBS diagnostic connector via ISO 7638 plug * WABCO EBS system * Air suspension system incl. 1 raise/lower valve, mounted in direction of travel left behind axle module. Ride height is self-adjusting * 2 confusion-proof coupling heads front ISO 1728 * Air reservoir for brake system and air supply in steel (EN 286-2) Gsdpfx Acsx Tx Efjgobl Floor: * Board floor approx. 30 mm thick, multiple-bonded plywood * Rear floor jointed * Stake pockets for square tube stakes approx. 80 x 80 mm, arrangement according to drawing J9: 8 stake pocket rails (18 stake pockets per rail, 4 outer + 10 center per rail) Front wall: * Front wall approx. 2,000 mm high with steel volume corner posts, profiled steel sheet, bolted/riveted to frame, 2 pairs of lashing points (permissible lashing force approx. 1,000 kg per ring) on bulkhead according to EN 12640. Note: When using the front wall for load securing, suitable lashing straps must be used if the vehicle is operated without sideboards and rear drop / tailgate! * Sidewall VarioFix steel lashing outer frame without stake storage * 24 pairs of lashing rings in the outer frame (according to EN 12640), allowable drawbar pull approx. 5,000 kg per ring Electrics / Electronics: * Lamp bracket made of steel, positioned above underrun protector * KÖGEL LUXIMA Premium package, consisting of: LED license plate light, LED marker lights and front reflectors, flashing LED side marker lights, Superseal and bayonet connectors on the lights * 2 outline marker lights with arm, attached to multiple-chamber tail light * 2 multiple-chamber tail lights * Fixed adapter box with 2x 7-pin sockets (1 x ISO 1185 / 1 x ISO 3731, 24 V-N / 24 V-S) and 15-pin socket ISO 12098 * Compact LED rotating beacon, orange, with mounting tube, positioned on lamp carrier. Switch located in the lamp