Faymonville Max Trailer-3-Achs-Mega-Tele-Plateau-Nachlaufgel. nakup rabljenega (52.777)

Stanje: rabljeno, največja dovoljena obremenitev: 49.900 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2020, naslednji pregled (TÜV): 01/2027, with air suspension, hydromechanical forced steering, single extendable loading deck, wheel recess, with rear chamfer and loading ramps Dimension B 11,300 mm Unladen weight 15,100 kg STZ-L Gooseneck - robust steel welded construction - formed loading area 3,900 x 2,480 mm - hydromechanical forced steering (dual-circuit steering) - ball-bearing turntable saddle plate with replaceable 2" king pin and adjustable steering wedge - mechanical landing gear at the front Loading Platform - single telescopic, designed as an outer-inner tube construction with a fixed 300 mm section at the front - 300 mm sliding table on the inner tube, movable and lockable - locking of the extension stages via spring-loaded cylinders and conical pins - 1 pair of wheel recesses behind the 1st axle, depth 410 mm Chassis - 4-axle air-suspended chassis -1st axle is liftable and steered - SAF axle assembly, including three hydromechanically forced steered stub axles - Axles with adjustable tapered roller bearings and automatic slack adjusters (AGS) - Raise/lower valve as standard for lowering to a minimum of 805 mm, or raising to a maximum of 1,050 mm - Loading height 860 mm - Excavator boom recess 3,850 mm long, 750 mm wide - Wheel recess behind gooseneck 410 mm deep - Wheel recess behind the 1st axle 410 mm deep Rear End - Design: "500 mm rear chamfer" - Short 1,240 mm rear overhang from the center of the last axle - Hydraulic rear support Loading Ramps - 2-piece loading ramps, length 2,855 mm / 1,415 mm, width 890 mm - Hydraulic ramp adjustment Brake System - 2-line, all-wheel compressed air brake system with diaphragm brake cylinders - Automatic load-sensing brake (ALB) - Automatic slack adjusters (AGS) - Parking brake via spring-loaded cylinders - ABS brake Special Equipment - Wheel recess - Boom recess - Extendable widenings - Central lubrication system "BekaMax" - Electric power unit with radio remote control Technical Data Gooseneck Loading area (LxW): 3,900 x 2,480 mm 1,000 mm slope for Wirtgen machines Coupling height loaded: 1,250 mm Loading Platform Loading area (LxW): 8,800 x 2,550 mm Extendable by 2,800 mm Bljdsy Iq Tdopfx Ahmok Stepped up to (LxW): 11,600 x 2,550 mm Steering 1st axle liftable and steered 2nd to 4th axle hydromechanically forced steered (dual-circuit steering) Radio remote control Electric power unit

Stanje: rabljeno, največja dovoljena obremenitev: 29.421 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2018, Oprema: ABS, Schmitz SCS24 Megatrailer Bsdpoy Uf Dwjfx Ahmelk Platforma + pomična ponjava + Edscha streha + dvižna streha + portali vrata, 3 osi, Schmitz osi, kolutne zavore, zračno vzmetenje, ABS. Nosilnost: 29.421 kg

Stanje: dober (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 10.000 kg, dovoljena osna obremenitev (os 2): 10.000 kg, dovoljena osna obremenitev (os 3): 10.000 kg, prva registracija: 04/2018, dolžina tovornega prostora: 295.000 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 1.380 mm, skupna dolžina: 295.000 mm, skupna širina: 2.540 mm, skupna višina: 1.380 mm, Leto izdelave: 2018, Oprema: ABS, = Dodatne možnosti in oprema = - Zračno vzmetenje - Centralno mazanje = Dodatne informacije = Konfiguracija osi Zadnja os 1: Najv. dovoljena osna obremenitev: 10.000 kg Zadnja os 2: Najv. dovoljena osna obremenitev: 10.000 kg Zadnja os 3: Najv. dovoljena osna obremenitev: 10.000 kg Teže Lastna teža: 13.240 kg Nosilnost: 34.760 kg Skupna dovoljena masa: 48.000 kg Funkcionalno Višina nakladalne površine: 138 cm Vzdrževanje Tehnični pregled: veljavnost do 10.2026 Stanje Tehnično stanje: dobro Vizualno stanje: dobro Poškodbe: nobene Blsdpfxszc Nxme Ahmek Finančne informacije Cena: Na zahtevo

Stanje: novo, največja dovoljena obremenitev: 96.500 kg, skupna masa: 126.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 26.900 mm, skupna širina: 2.750 mm, Oprema: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full equipment details available upon request. Gooseneck: * Hydraulically lift/lowerable and detachable gooseneck, approx. 3,650 mm long * For tractor units: 6x4 or 8x4 * Truck hydraulic connection with flow control (20 l/min), incl. gantry for supply line suspension; the tractor unit tank must have at least 80 l capacity * With MAX Trailer coupling units; otherwise, coupling units to be provided ex works by the customer * Gantry with winch for spare wheel mounted at the front of the gooseneck * 3.5-inch king pin * Steel front wall approx. 400 mm high * Removable aluminium side and rear boards on the gooseneck, approx. 400 mm high, anodised finish * Control lever on the gooseneck protected by a folding cover * Operator area lighting at gooseneck, with on/off switch * One 7-pin socket each at the left and right rear of the gooseneck for warning sign * BEKA-MAX central lubrication system for one gooseneck with standard NLGI-2 grease * Hydraulic connections from the gooseneck to the low-bed via screw couplings * Access steps on the gooseneck * Four warning panels extendable by approx. 1,000 mm (approx. 423 x 423 mm) each, with one LED position lamp and bracket for beacon * Mounting adapters for 2 spare wheels * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery. Output: 9.5 kW (12.9 hp) at 3,000 rpm * Hydraulic connecting lines between powerpack and connector plate at the gooseneck * One LED worklight left and right on the rear plate of the gooseneck, individually switchable * Radio remote control for: - Operating the powerpack, start/stop of diesel engine. - Operating remote steering (in addition to cable remote), with 2 LED indicator lights on receiver for single-track control. - Lift/lower gooseneck. - Lift/lower suspension of running gear 2-axle front module: * Bolt-eye coupling front and rear. Length: approx. 2,970 mm. Module width: approx. 2,750 mm * BEKA-MAX central lubrication system for 2-axle module with standard NLGI-2 grease (not connected to steering rods) * One 7-pin socket each at the left and right rear of the front module for warning signs * Platform surface with sand coating as slip protection * Yellow reflective tape in accordance with EU regulations at the sides, on the extension, and at the rear of the trailer * One 7-pin socket for warning signs, left and right on the front module, in the axle area * Extendable outriggers approx. 230 mm per side for the 2-axle module * 1 pair M42 threaded blocks between the axles of the front module Bledpfxezahp Sj Ahmok * 1 pair brackets for plug-in warning panels in the stake pockets of the exterior frame of the loading area Loading platform: * 6-axle, double telescopic loading platform with bolt-eye coupling at the front and rear chamfer approx. 500 mm x 8° * Platform length: approx. 11,000 mm * Technically extendable by: approx. 8,200 + 7,700 mm * Axle spacing: approx. 1,500 mm * Base width: approx. 2,750 mm * Hydraulic coupling pin * BEKA-MAX central lubrication system for the platform with standard NLGI-2 grease * Platform surface with sand coating as slip protection * 11 pairs of recessed lashing rings in the external frame of the loading platform, foldable outwards (LC 10,000 daN) * Permanently welded intermediate table, approx. 500 mm long * 1 pa...

Stanje: novo, največja dovoljena obremenitev: 42.900 kg, skupna masa: 55.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 29.000 mm, skupna širina: 2.540 mm, Oprema: ABS, The complete inventory of vehicles, including those available for immediate and short-term delivery, can be found on our website. Extract from the equipment list. Full specifications available upon request. Loading Platform: * Gooseneck, length approx. 3,900 mm with central beam * Loading platform, double extendable, length approx. 9,300 mm * A support plate, approx. 200 mm wide, is permanently welded to the central beam * Pneumatic locking system with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the current platform length (except for the supply of the first and second locking positions) * Technical fifth wheel load: 25,000 kg Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4 * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, all axles hydro-mechanically forced steered, mounted on turntables Bsdjyvnd Nepfx Ahmjlk * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * 275/70 R 22.5 3PMSF twin tires. Brand at our discretion * ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic power unit for operating hydraulic functions * 3 pairs of recessed lashing rings in the outer frame of the gooseneck, foldable to the outside * 1 pair of lashing rings at the king pin (LC 10,000 daN) – all other lashing rings (LC 5,000 daN) * 3 pairs of stake pockets recessed in the outer frame of the gooseneck for plug-in stakes approx. 100 x 50 mm * 1 stake pocket bar mounted transversely on the gooseneck floor for plug-in stakes approx. 100 x 50 mm * 1x at the rear of the gooseneck * 2" king pin * Mechanical landing gear with 2-speed gearbox and crank * 8 pairs of stake pockets recessed in the outer frame of the loading platform for plug-in stakes approx. 100 x 50 mm * 10 pairs of recessed lashing rings in the outer frame of the loading platform, foldable to the outside * Remote steering from the front and rear via cable remote control, with axle tracking control, no installation required in the tractor unit * Last axle with air bellows venting activated when parking brake is applied * Steel front wall, approx. 1,600 mm high, certified design according to EN12642:2016 XL * Round NATO socket at the front connection bar (Maeler & Kaege VG 96 917) * 1 LED work light on each side at the landing gear, wired to the tractor unit connection bar * Approx. 32 mm wooden floor on the gooseneck and the loading platform * On the large-section extension tube, one locking position every approx. 500 mm * On the small-section extension tube, one locking position every approx. 1,000 mm, enabling locking at every approx. 500 mm * Cut-outs in the outer frame of the loading platform for attaching tension belts (LC 2,500 daN) * 4 stake pocket bars mounted transversely on the loading platform floor for plug-in stakes approx. 100 x 50 mm * 4 wheel chocks with holder mounted under the loading platform * 1 lockable INOX toolbox, approx. 2,390 x 800 x 500 mm (L x W x H), mounted under the loading platform on the left in the direction of travel * 1 additional lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the loading platform on the right in the direction of travel * 1 LED work light each left and right in front of the axles, with wiring * 2 axle load gauges mounted on the left side including axle load diagram * 1st axle equipped with automatic lift axle function as well

Stanje: novo, največja dovoljena obremenitev: 44.000 kg, skupna masa: 61.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Further information here: Bjdpjv D Abtjfx Ahmjlk

Stanje: novo, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 12.000 kg, dovoljena osna obremenitev (os 2): 12.000 kg, dovoljena osna obremenitev (os 3): 12.000 kg, skupna dolžina: 9.300 mm, skupna širina: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R17.5, medosna razdalja: 1.360 mm, barva: modra, Leto izdelave: 2023, Oprema: dvižna zadnja plošča, Farbe: Blau Nutzlast: 54.465 kg Hauptmerkmale: Hersteller: Faymonville Modell: MAX 110-Z-4AA-9.30-U Fahrgestellnummer: YAMT14XX4N0107629 Baujahr: Neu und unbenutzt Gewichte/Nutzlasten: Sattellast: 23.000 kg Achslast: 12.000 kg Gesamte Achslast: 48.000 kg Zulässiges Gesamtgewicht (zGG): 71.000 kg Leergewicht: 16.535 kg Zuladung: 54.465 kg Achsen: Achsenhersteller: BPW Hydraulische Lenkung Luftfederung mit Hub-/Senkventil WABCO-Bremssystem Bereifung: 245/70 R17.5 – Michelin (Tragfähigkeitsindex 146/146 F) 1. Achse liftbar Abmessungen: Ladeflächenlänge: 9.300 mm Verlängerungen: 6.500 + 6.800 mm Ladeflächenbreite: 2.540 mm Ladehöhe: 900 mm Zusätzliche Informationen: Doppelt teleskopierbare Ladefläche Containerverriegelungen Ausschubträger in der Breite + Holzabstützungen für Breitenverbreiterung Zurringe Satz doppelt klappbarer Auffahrrampen Zentralfettung 1x Ersatzrad + Halterung JOST-Stützwinde 24 Volt Elektrik 2.0″ Königszapfen 1 verzinkte Stahl-Frontwand Elektrisch betriebene Hydraulikpumpe Manuelle Lenkung Twistlocks = Weitere Informationen = Allgemeine Angaben Baujahr: 2023 Achskonfiguration Bjdpjuu Hcfjfx Ahmelk Reifenmaß: 245/70 R17.5 Federung: Luftfederung Hinterachse 1: Doppelbereift; Liftachse; max. Achslast: 12.000 kg; gelenkt; Achsenmarke: BPW; Reifenprofil links innen: 100%; links außen: 100%; rechts innen: 100%; rechts außen: 100% Hinterachse 2: Doppelbereift; max. Achslast: 12.000 kg; gelenkt; Reifenprofil links innen: 100%; links außen: 100%; rechts innen: 100%; rechts außen: 100% Hinterachse 3: Doppelbereift; max. Achslast: 12.000 kg; gelenkt; Reifenprofil links innen: 100%; links außen: 100%; rechts innen: 100%; rechts außen: 100% Hinterachse 4: Doppelbereift; max. Achslast: 12.000 kg; gelenkt; Reifenprofil links innen: 100%; links außen: 100%; rechts innen: 100%; rechts außen: 100% Gewichte: Leergewicht: 16.535 kg Zuladung: 54.465 kg zGG: 71.000 kg Funktionalität: Ladeflächenhöhe: 900 mm Ausziehbarer Aufbau: Ja Zustand: Allgemeinzustand: sehr gut Technischer Zustand: sehr gut Optischer Zustand: sehr gut Finanzielle Informationen Preis: auf Anfrage

Stanje: novo, skupna masa: 78.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 850 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, Oprema: ABS, Gooseneck: • Gooseneck in SNT design to optimize loading area length, approx. 3,700 mm long, rear with a bevel approx. 1,000 mm x 10° • For tractor units: 4 x 2, 6 x 2 and 6 x 4 Loading Area: • Extendable loading platform, approx. 8,800 mm long with rear bevel approx. 500 mm x 10° • A recess in the platform and rear bevel to accommodate the excavator dipper stick, approx. 3,950 x 580 x 370/450 mm Ramps: • One pair of two-piece steel ramps, approx. 4,350 mm long and 900 mm wide • Hydraulically folding ramp tips • Ramps hydraulically adjustable separately approx. 235 mm outwards and approx. 215 mm inwards • Hardwood decking on the beveled part of the loading area • Ramp with hardwood decking Blsdpfx Ahervw U Sjmok • 20 x 30 mm square climbing strips, approx. every 200 mm on the outer frame of the ramp Axles and Tyres: • TWINAXLE-II independent wheel suspension with BPW stub axles, 1st axle steered in advance, all other axles are hydromechanically forced steered • 1st axle with electromagnetic reverse lock via reverse gear and manual activation • Technical axle load: 12,000 kg • Hydr. axle compensation, hydraulic cylinders with shut-off valves • Tyres 245/70 R 17.5 • TPMS tyre pressure monitoring system according to ECE R 141 Accessories Included: • Plug-in steel front wall, approx. 400 mm high • 4 wheel chocks with holder • Front connection bar with yellow-red air couplings • 3 kW electro-hydraulic power pack for hydraulic control, except for hydraulic winches • 1 spare wheel • 2 pairs of screw-in lashing rings • 1 pair of horizontal lashing rings in the rear area of the gooseneck • On the gooseneck: 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized • On the gooseneck: 1 plug-in ALU rear board, approx. 400 mm high, anodized • Approx. 40 mm thick hardwood decking on the gooseneck, checker plate over the king pin • 3.5" king pin • Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide • Load area locking with conically welded arresting profiles every 250 mm • Incl. pre-tensioning plate • 1 pair of lashing rings on the front cross member • 8 pairs of recessed, fold-out lashing rings in the outer frame of the platform • Extendable (galvanized) widenings approx. 230 mm per side • 1 pair of fixed open wheel recesses up to extension, approx. 700 x 410 mm, in the platform in front of the 1st axle • Wheel recesses with checker plate covering and 15 x 15 mm square climbing strips, approx. every 200 mm • 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm, in the platform between the 1st and 2nd axle • Wheel recesses with 15 x 15 mm square climbing strips and widenings in the lower section • ALU covers for the wheel recesses between 1st and 2nd axle, which can also be used as broadening planks • 1 pair of mechanical rear supports • 20 x 30 mm square climbing strips, approx. every 200 mm on the outer frame of the bevel of the loading area • Central lubrication system with 1 pump, BEKAMAX brand, standard grease as per NLGI-2 • Radio and cable remote control, with 2 indicator lights on the receiver for single wheel control • WABCO Smart Board system • The Smart Board is equipped with an odometer • 4 warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and mounts for rotating beacon

Stanje: novo, največja dovoljena obremenitev: 67.200 kg, skupna masa: 85.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment features. Full equipment details upon request. GOOSENECK * Gooseneck in SNT design for optimized loading platform length, approx. 3,700 mm long, with a rear chamfer approx. 1,000 mm x 10° * For tractor units: 6x2, 6x4, and short 8x4 Bljdpfxsrgzv Nj Ahmek * Plug-in steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for controlling hydraulic functions, excluding hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized finish * One plug-in ALU rearboard, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood flooring above the gooseneck, checker plate flooring above the king pin * 3.5 inch king pin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Round NATO socket on the front connection bar (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow control, incl. bracket for suspension of supply lines (Faymonville couplings) * 2 pairs of stake pockets sunk into the gooseneck, for plug-in stakes approx. 100 x 50 mm LOADING DECK * Extendable loading deck, length approx. 11,000 mm, rear chamfer approx. 500 mm x 10° * Pneumatic locking with conical locking bolt and reinforced lock positions, supply lines are routed protected in the extendable beams and automatically adjust to the respective platform length * BPW axles and suspension, 1st axle steerable, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Tyres: 235/75 R 17.5 3PMSF, twin tyres * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * Continuous 50 mm thick hardwood flooring on the loading deck, interrupted between the axles (increases coefficient of friction) * Slotted holes for attachable and re-positionable bridging elements: - on the fixed section behind the gooseneck - at the front of the loading area * 1 sliding intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate flooring, slotted holes front and rear for attachable and repositionable bridging elements * 1 pair of recessed horizontal lashing rings at the front of the fixed platform section (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the deck, fold-out to the outside (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering operated from both front and rear via cable remote control, with axle tracking control, no installation in the tractor unit * 1st axle with automatic lift-axle function and start-up aid according to EU Directive 2021/535 * Under the gooseneck and on the rear cross member, one 7-pin socket each on left and right, with bracket for warning signs * Painted sand coating on the outer frame of the platform as well as on the checker plates of the platform and in the transition area between the loading deck

Stanje: novo, največja dovoljena obremenitev: 50.400 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment specification. Full specification available on request. GOOSENECK * Gooseneck in SNT design to optimize platform length, approx. length 3,700 mm, with rear bevel of approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection rail with sockets Blsdpfx Aotx Nwnshmsk * 3 kW electro-hydraulic unit for controlling hydraulic operations, except for hydraulic winches * 1 pair of detachable ALU side walls, approx. 400 mm high, anodized finish * 1 detachable ALU rear wall, approx. 400 mm high, anodized finish * Over the gooseneck, approx. 40 mm thick hardwood flooring, over the king pin with checker plate covering * 2-inch king pin * Mount at the rear of the gooseneck for ALU drive-on ramps * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) LOAD PLATFORM * Extendable load platform, approx. length 8,800 mm, with rear bevel approx. 500 mm x 10° * Recess in platform and rear bevel for accommodating an excavator dipper stick, approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, 1st axle self-steering, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reversing lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * Tires: 235/75 R 17.5 3PMSF twin tires * Mechanical landing legs with 2-speed gearbox and crank, JOST Modul B - static test load = approx. 50,000 kg * Platform with continuous and between-axles interrupted 50 mm thick hardwood flooring (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Extendable galvanized side extensions by approx. 230 mm each side (without wooden planks) * Wheel wells with square climbing strips, approx. 15 x 15 mm in front of the axles, continuous opening up to the cross member of the gooseneck, approx. 700 x 410 mm (W x D) * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks * Lockable aluminium elements on the extension tubes of the side extensions * Widenable U-profiles for inserting ALU covers: - on the fixed section behind the gooseneck - on the intermediate table - on the extendable platform * Wheel wells with square climbing strips, approx. 15 x 15 mm between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks * Lockable aluminium elements on the extension tubes of the side extensions * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with single-track monitoring of the axles, without installation in the tractor unit HYDRAULIC LOADING RAMPS * One pair of two-part steel ramps, type: DR-15/60-900-4350-KG-HV-M, approx. length 4,350 mm and width approx. 900 mm * Hydraulically folding ramp tips * Ramps hydraulically adjustable individually by approx. 235 mm outward and approx. 215 mm inward * Super Grip rubber surface approx. 25 mm and steel surface approx. 5 mm as additional

Stanje: novo, največja dovoljena obremenitev: 48.300 kg, skupna masa: 71.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete vehicle inventory, including vehicles available immediately and at short notice, can be found on our website. Below is an excerpt from the equipment list. Full specification available upon request. Bsdpfx Ajyhkqnshmolk GOOSENECK: * Gooseneck with integrated single-axle running gear (pendulum axle) in a detachable version * Gooseneck hydraulically liftable and lowerable, including hydraulic connection linked to the hydraulic axle compensation of the first axles * Length: approx. 5,200 mm, with front tapering approx. 60° * Fifth wheel load according to data sheet: W25-DSR2700-12/22.7 * For tractor units: 6 x 4 or 8 x 4 * Steel front wall, plug-in type, approx. 400 mm high, with beveled design * 1 pair of mechanical supports at the front of the gooseneck * ASPÖCK-UNIBOX on the front connector panel with 24N, 24S & 15-pin sockets * 1 spare wheel holder inside the front wall of the gooseneck with jib * 2 pairs of recessed lashing rings on the gooseneck (LC 2,500 daN) * 2 pairs of recessed lashing rings on the outer frame of the running gear at the front, foldable outward (LC 10,000 daN) * 1 pair of lashing rings at the transition from running gear to loading platform (LC 10,600 daN) * On the gooseneck 1 pair of removable aluminum drop sides, approx. 400 mm high, anodized * On the gooseneck 1 removable aluminum rear wall, approx. 400 mm high, anodized * 3.5 inch kingpin * TPMS tire pressure monitoring system according to ECE R 141 * Round NATO socket on the front connector panel (Maeler & Kaege VG 96 917) * 1 stainless steel toolbox with 1 lid, mounted on the gooseneck on the right in the direction of travel by the aluminum drop side, approx. 1,350 x 400 x 400 mm (L x W x H) LOADING PLATFORM: * Low-bed with external beams, designed as a telescopic loading platform in low-profile design with front extension including fixed approx. 50 mm thick hardwood floor * Length x width approx. 8,000 mm x 2,740 mm * Mechanical bolt-lug coupling from low-bed to running gear for swapping the loading platform or installing extension beams * One locking position approx. every 500 mm on the extension * 4 pairs of recessed lashing rings fitted flat in the loading platform along the outer frame/external beams (LC 10,000 daN) * 1 lashing ring each on the left and right outer rear cross member (LC 10,000 daN) * Foldable extensions, approx. 230 mm per side (WITHOUT wooden boards) * Loose extension planks, steel-rimmed * Preparation for installation of bolted container positions for 1x 20’ or 1x 40’ container on the outer beams. Without container locks * 6 pairs of threaded blocks between the lashing rings under the top chord of the outer beam for mounting bolted M24 rings (LC 8,000 daN) * 2 pairs M24 bolt rings (LC 8,000 daN) included REAR RUNNING GEAR: * Rear running gear with closed outer frame, checker plate decking and continuous prism-shaped excavator trough, approx. 1,450 x 900 x 505 mm, open at the rear * PENDULUM AXLE, all axles hydro-mechanically forced-steered * Hose rupture valve on axle compensation cylinder with automatic reset function * Hydraulic cylinders with shut-off valves and foreplugs to secure in raised position * Final paint of axles in 2 layers of 2-component paint, single color, DB 7350 Novagrau * Technical axle load: 12,000 kg each * Hydraulic axle compensation * 245/70 R 17.5 3PMSF, brand at our choice * Remote steering from front and rear via cable control, with axle alignment check, no installation in the tractor unit * 4 pairs of hanging la

Stanje: rabljeno, največja dovoljena obremenitev: 27.199 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2013, dolžina tovornega prostora: 13.310 mm, širina tovornega prostora: 2.460 mm, višina nakladalnega prostora: 2.640 mm, prostornina tovornega prostora: 86 m³, Oprema: ABS, * 5412 – ID vozila za telefonske povpraševanja * Tip: SKO 24/L - 13.4 FP 60 COOL * ABS, EBS, osi Schmitz, diskovne zavore, zračna vzmetitev (dvigovanje in spuščanje), dvižna os, škatla za orodje, portalna vrata, dvonadstropna izvedba z nosilci * Carrier Maxima 1300, dizel (delovni čas motorja 4.648 ur), električni pogon (delovni čas pomožnega motorja 3.326 ur), -30 °C / +30 °C * Tovorna enota je oblepljena s folijo / oglaševanjem! * Pnevmatike 1. os: 385/65R22,5 (4 / 7 mm) Bjdsxth R Iopfx Ahmelk * Pnevmatike 2. os: 385/65R22,5 (3 / 8 mm) * Pnevmatike 3. os: 385/65R22,5 (9 / 3 mm) ----naš e-poštni naslov:     naša storitev za vas:       - pridobitev začasnih ali carinskih registrskih tablic       - prevoz / dostava po vsej EU       - carinsko razčiščevanje vozil za tretje države Whatsapp za angleščino, nemščino, ruščino in druge jezike:

Stanje: rabljeno, največja dovoljena obremenitev: 27.206 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2010, naslednji pregled (TÜV): 10/2026, dolžina tovornega prostora: 13.310 mm, širina tovornega prostora: 2.460 mm, višina nakladalnega prostora: 2.650 mm, prostornina tovornega prostora: 86 m³, Oprema: ABS, * 7861 – ID vozila za telefonska povpraševanja * Tip: SKO 24/L – 13.4 FP 60 COOL * ABS, EBS, osi Schmitz, kolutne zavore, zračna vzmetenje (dvigovanje in spuščanje), dvižna os, predal, portalna vrata, dvonadstropna konstrukcija z nosilci * Carrier Maxima 1300, dizel (ENG 5972 ur), električni pogon (SBY 5.243 ur), -30 °C / +30 °C * Kontenjer je oblepljen s folijo / oglasom! Bsdpfexth Rnjx Ahmslk * Pnevmatike 1. os: 385/65R22,5 (3 / 4 mm) * Pnevmatike 2. os: 385/65R22,5 (7 / 6 mm) * Pnevmatike 3. os: 385/65R22,5 (8 / 8 mm) ----naš e-poštni naslov:     naša storitev za vas:       - pridobitev začasnih ali carinskih registrskih tablic       - prevoz / dostava po vsej EU       - carinski postopki za vozila v tretje države WhatsApp za angleščino, nemščino, ruščino in druge jezike:

Stanje: rabljeno, največja dovoljena obremenitev: 32.000 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2013, dolžina tovornega prostora: 13.630 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.000 mm, prostornina tovornega prostora: 101 m³, Oprema: ABS, * 2203 – identifikacijska številka vozila za telefonske povpraševanja * ABS, EBS, osi BPW-Eco-Plus, bobnaste zavore, zračna vzmetenje (dvig in spuščanje), dvižna os, portalna vrata, drsna ponjava, pritrdilne zanke, perforirana letva, stranska opora za palete (leva in desna), Edscha, dvižno streho, rezervno kolo * Varnostno pripenjanje tovora po standardu DIN EN 12642, koda XL * Pnevmatike 1. os: 445/45R19,5 (10 / 8 mm) * Pnevmatike 2. os: 445/45R19,5 (5 / 10 mm) * Pnevmatike 3. os: 445/45R19,5 (10 / 9 mm) ----naš e-poštni naslov:     naša storitev za vas:       - pridobitev začasnih ali carinskih registrskih tablic       - transport/dostava po vsej EU       - carinski postopki za vozila, ki se izvažajo v tretjo državo Whatsapp za angleščino, nemščino, ruščino in druge jezike: Bjdozlwx Sopfx Ahmelk

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902037809, lastna masa: 7.722 kg, največja dovoljena obremenitev: 31.278 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.000 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, vzmetenje: zrak, velikost pnevmatike: 435/50 R19,5", stanje pnevmatik: 100 odstotek, barva: bela, Pozor: Slike so arhivske! #Šasija, sedlo, prevoz Kontejner za tuljave, dolžina približno 8.040 mm, 8 nosilcev za tuljave, dimenzije 80 x 50 x 1200 mm za kontejner za tuljave ali 70 x 40 mm za vstavljanje v zunanji okvir, 4 para notranjih žepov za tuljave, dimenzije 82 x 52 mm, pokrov za tuljave s ploščami s sitotiskom in prečnimi letvami 1 par adapterjev za pritrditev, vstavljivi na nosilec za tuljave Kontejner za tuljave, ojačana izvedba 4 pari "Vario-Lash" prstnov za pritrditev, za uporabo v "Load-Lock profilu", vsak z nosilnostjo 6 ton, ločeno 7 parov dodatnih prstnov za pritrditev, vgrajenih v zunanji okvir, vsak z nosilnostjo 5 ton 4 pred in 3 za kontejnerjem za tuljave 9 parov prstnov za pritrditev, vsak z nosilnostjo 5 ton, vgrajenih v območju kontejnerja za tuljave 1 par pritrdilnih točk na vzdolžnem nosilcu pred kontejnerjem za tuljave, vsaka z nosilnostjo 5 ton Paletni predal za 8 euro palet, pred 1. osjo Paletni opora, robustna izvedba, na obeh straneh pritrjena z vijaki, višina približno 15–20 mm, z možnostjo pritrditve na približno vsakih 380 mm 1 nosilec za rezervno kolo za 1 kolo, z kompletom za pritrditev kolesa, na desni strani, pozor na razdaljo od tal 2 plastična orodjarna omara, širina 600 / višina 425 / globina 460 mm, z zaklepanjem Nosilec za vgrajeni viličar na zadnji strani, pocinkana izvedba 5 parov žepov za letve, vgrajenih v zunanji okvir, notranje dimenzije približno 72 x 42 mm, žepi za letve so primerni za pritrditev letev za tuljave, če so zasukane za 180° 3 žepi za letve, vgrajeni v sredino tal, notranje dimenzije približno 72 x 42 mm (ne v območju kontejnerja za tuljave), žepi za letve so primerni za pritrditev letev za tuljave, če so zasukane za 180°, 2 pred kontejnerjem za tuljave (1 skupaj z zunanjim okvirjem) in 1 za kontejnerjem za tuljave #Osi in vzmetenje SAF osi s kolutnimi zavorami "Osno/podvozje laserjsko izmerjeno" – zmanjšanje obrabe pnevmatik in porabe goriva "TIS-Tyre Inflate System", avtomatski sistem za nadzor tlaka v pnevmatikah in polnjenje Zračno vzmetenje 1. os, avtomatska dvižna os, dodatno elektronsko upravljana z vozilom, vključno z možnostjo prisilnega spuščanja in pomočjo pri speljevanju #Zavorni sistem Dvotokni zračni zavorni sistem Barvna oznaka cevovodov za lažje vzdrževanje Aluminijasta zračna rezervoar Zavora s pomnilnikom, ki ostane vklopljena z ventilom za dvig in spuščanje + funkcijo samodejnega ponastavitve AAC Basic, avtomatska razbremenilna os, ki deluje na zadnjo os, kot pomoč pri manevriranju, do 20 km/h Wabco SmartBoard, za prikaz podatkov o vozilu, kot so obremenitve osi, prevožena razdalja in diagnostične/sistemske opozorila Prepoznavanje obremenitve osi preko signala EBS-Canbus #Kolesa in pnevmatike 435/50 R19,5", aluminijasto platišče, polirano #Elektrika 2 x 7-polni in 1 x 15-polni vtič, zaščiteni pred napačnim priključitvijo, na sprednji strani, brez povezovalnega kabla 2 x 7-polni vtič na levi strani zadaj za vgrajeni viličar #Talna obloga Plošče s sitotiskom, debeline približno 30 mm, za visoko točkovno nosilnost za os viličarja do največ 5.600 kg #Sprednja stena / Kotne letve na sprednji strani 2 para prstnov za pritrditev na kotnih letvah sprednje stene, znotraj levo in desno, na približno 400 mm in na približno 1000 mm višine Predal v sprednji steni, dostopen od znotraj #Srednje letve 3 pari drsnih letv, ki jih je mogoče premikati po celotni dolžini 5 parov položajev letv 6 adapterjev za podaljšanje drsnih letv + približno 25 mm, na adapter Bljdpozl D Iyjfx Ahmek #Vstavne letve

Stanje: rabljeno, številka stroja/vozila: WFDFLT33802021791, lastna masa: 6.433 kg, največja dovoljena obremenitev: 28.567 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2017, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.000 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, vzmetenje: zrak, velikost pnevmatike: 445/45 R19,5", barva: črn, Pozor: Slike so arhivske! Vozilo je po potrebi še v uporabi! #Podvozje prikolice Jeklena konstrukcija iz fino zrnatega jekla, varjena, ploščad prikolice z zamenljivo 2" kraljevsko pin, zunanji okvir rahlo nagnjen z "Load-Lock" profilom za pritrditev zategovalnih trakov, 24 ton. 2-stopenjska podorna opora, upravljanje z ene strani, s polkrožnim spodnjim delom in ravno priključno ploščo, z izravnavo nagiba, proizvajalec Jost, 2-stopenjska izvlečna lestev na zadnji strani, zaklep vrat na boku, klini za podpiranje z držalom, bočni zaščitni okvir iz aluminija, spodnji zaščitni okvir iz pocinkane jeklene pločevine, špricer na zadnji strani, ki pokriva celotno širino, četrtkrožni odbijači pred 1. osjo in za vsako osjo, s špricnimi odbijači za vsako osjo, "Heavy Blocker" zadnji bočni odbijač + "valjčni odbijač na boku", pritrdilni trak za palete, robustna izvedba, na obeh straneh, varjen, nosilec rezervnega kolesa za 1 kolo, z kompletom za pritrditev kolesa, plastična škatla za orodje, z predalom in vložkom, š=650 / v=520 / g=670 mm, zaklenljiv s ključavnico, škatla za dokumente #Osi + vzmetenje BPW osi s bobnovimi zavorami z 8-luknjično pestjo, "Os/podvozje - lasersko izmerjeno" Zmanjšanje obrabe pnevmatik in porabe goriva, merilnik dviga/števec prevoženih kilometrov v mehanski analogni izvedbi, zračno vzmetenje, 1. os je samodejna dvižna os, vključno s prisilnim spustom in pomočjo pri speljevanju, aktiviranje "3-krat pritisnite zavoro" (pri pomoči pri speljevanju do največ 25 km/h), dodatno upravljanje z gumbom na vozilu #Zavorna sistem 2-vodni pnevmatski zavorni sistem, vzmetna parkirna zavora, 2 varno priključljivi priključni glavi spredaj, EBS proizvajalec Wabco, elektronski zavorni sistem z vtičnico EBS spredaj, z ventilom za dvigovanje in spuščanje, višina vozila v povezavi z dvižno osjo, pri dvignjeni dvižni osi se nosilnost oziroma celotna višina poveča za 50 mm #Kolesa in pnevmatike 445/45 R19,5", proizvajalec po izbiri proizvajalca #Elektrika 24 voltov, večkomorne luči v LED tehnologiji, stranska rumena LED osvetlitev, 2 beli pozicijski svetili spredaj v LED tehnologiji, 2 belo/rdeči svetili za označevanje voznega pasu zadaj v LED tehnologiji, 2 x 7-polne in 1 x 15-polna varno priključljiva vtičnica spredaj #Talna plošča Plošče s sitotiskom, debeline približno 30 mm, prečni nosilci z vložkom v obliki črke omega, na vzdolžnih podnožjih za visoko točkovno nosilnost za viličar, največ 7100 kg #Sprednja stena/kotniki spredaj 2580 mm visoka, kotniki iz jekla, volumenska izvedba, naprava za sprostitev stranske ponjave na sprednji steni, na spodnji notranji strani na višini približno 140 mm, z jeklenim odbijačem, sprednja stena je dodatno obložena s ploščo s sitotiskom, visoko 1250 mm #Srednji kotniki 3 pari drsnih kotnikov, drsnih po celotni dolžini, s 4 vložki in na spodnji strani z dolgim žepom #Vložki Aluminijasti ali leseni V-vložki #Zadnja stena/kotniki zadaj Kotniki zadaj iz jekla do spodnjega roba strehe, pritrdilni element za ponjavo z okroglo cevjo in zategovalnikom, zadnja vrata, 2-krilna, z dvema notranjima vrtljivima zapahom #Ponjava Ponjava, z varjenimi horizontalnimi in vertikalnimi trakovi, pritrdilni elementi iz nerjavečega jekla #Streha Bljdszlciijpfx Ahmek Drsna streha, zadnji dvig lahko dvignete, z drsno streho od zadaj proti spredaj, L-strešni nosilec za avtomobilsko industrijo, hidravlična dvigala na obeh straneh, na vsakem nosilcu en valj z eno ročno črpalko na nosilcu, dvig za 400 mm, optimalen rob za deževnico na zadnji strani #Odobrit

Stanje: rabljeno, številka stroja/vozila: WFDFLT33502021621, lastna masa: 5.897 kg, največja dovoljena obremenitev: 29.103 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2017, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.000 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R19,5", barva: zelen, Pozor, slike so arhivske. Vozilo je morebiti v uporabi! *Podvozje, sedelna prikolica za prevoznike Jeklena konstrukcija iz fino zrnatega jekla, varjena, lahka konstrukcija, sedelna plošča z zamenljivim 2-palčnim kraljevskim čepom. Zunanji okvir rahlo nagnjen z "Load-Lock profilom" za pritrditev zategovalnih pasov. Opozorilo! Za pritrditev pasov v povezavi s stranskimi stenami je treba odpreti stranske stene! 24 t, 2-stopenjski podporni sistem, upravljanje z ene strani, z ravno spodnjo sekcijo, brez bočnega kompenzatorja, iztegnjena lestev na zadnji strani, stranski zavorni mehanizem za vrata, 2 podstavka s pritrdilom Stranski zaščitni element iz aluminija, paletni okvir za 8 euro palet, nameščen pred osmi, pokrov paletnega okvirja črne barve, spodnja zaščita iz pocinkane jeklene pločevine, četrtkrožni blatniki pred 1. osjo in za vsako osjo, z zaščitnimi bloki proti brizganju za vsako osjo, zadnji prečni odbijač "Heavy Blocker" + stranski "valjčni odbijač". Stranski opornik za palete, robustna izvedba, na obeh straneh, približno 15 do 20 mm visok, z možnostjo pritrditve na vsakih 200 mm, višina nakladanja se zmanjša za približno 20 mm, 1 plastični orodjarni predal, z predalom in vložkom, š=650 / v=520 / g=670 mm, zaklepna možnost z obeskom Blsdpfx Aezlcdgehmjk *Osi + vzmetenje SAF osi z diskovimi zavorami, "laserja izmerjeno geometrijo osi/podvozi", zmanjšanje obrabe pnevmatik in porabe goriva, "TIS-Tyre Inflate System", avtomatski sistem za nadzor in napihovanje tlakov v pnevmatikah, zračno vzmetenje, brez dvižne osi. *Zavorni sistem Dvo-vodni zračni zavorni sistem, zavora na vzmet s parkirno funkcijo, 2 vtičnice za priključitev zavor, ki se ne morejo zamenjati, na sprednji strani, brez povezovalnega kabla, EBS, elektronski zavorni sistem z vtičnico EBS na sprednji strani, z ventilom za dvigovanje in spuščanje, sistem stabilnosti vozila med vožnjo. *Kolesa in pnevmatike 385/55 R19,5", proizvajalec po izbiri proizvajalca, jeklena platišča, tovarniška srebrna barva. *Elektrika 24 Volt, večkamrne luči, stranska rumena LED osvetlitev, 2 beli pozicijski svetili spredaj. 2 beli/rdeči stranski gabaritni svetili zadaj, 2 x 7-polna in 1 x 15-polna vtičnica, ki se ne morejo zamenjati, na sprednji strani. *Talna plošča Sitotiskano ploščo, debeline približno 30 mm, prečne letve z vložkom Omega, na vzdolžnih nosilcih za visoko točkovno obremenitev za viličar, nosilnost do maks. 7100 kg. *Sprednja stena/kotniki spredaj 2580 mm visoka, kotniki iz jekla, na spodnji notranji strani na približno 140 mm višine z jeklenim odbijačem. *Srednji kotniki 3 pari drsnih kotnikov, premikajo se po celotni dolžini, z 4 vstavnimi žepi in na spodnji strani z dolgim žepom. 3 pari položajev kotnikov *Vstavne letve Aluminijaste V-vstavne letve *Zadnja stena/kotniki zadaj Kotniki zadaj iz jekla, do spodnjega roba strehe, pritrdilni elementi za ponjavo z okroglim profilom in zateznim mehanizmom za ponjavo. Zadnja vrata, dvo-krilna, z 2 notranjimi vrtljivimi zapornimi mehanizmi. *Ponjava Ponjava, z varjenimi horizontalnimi in vertikalnimi trakovi, zatezni mehanizmi iz nerjavečega jekla. Logotip stranke "Bring" na stranskih ponjavah in zadnjih vratih. *Střecha Pomikajoča se ponjava, zadnji del je dvigljiv, z možnostjo pomika ponjave od zadaj naprej, L-nosilec za avtomobilsko industrijo. EcoLift - dvižna streha, ki se lahko dvigne za približno 380 mm, na obeh straneh, s podporo plinskega vzmetenja. Optimalen trak proti deževju na zadnji strani, na vrhu zadnjega nosilca, nad vrati. *Odobritev / t

Stanje: novo, največja dovoljena obremenitev: 23.340 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, NEW VEHICLE Fliegl 3-Axle Flatbed Low Loader DTL - S - 300 Agrar, chassis and frame hot-dip galvanized Gross weight: 24,000 kg / 30,000 kg Payload: 17,340 kg / 23,340 kg Unladen weight: 6,660 kg Overall length: 11,625 mm Platform length: 9,000 mm incl. 900 mm approach slope Loading height: 900 mm Large lashing package 40 mm drawbar Tyres: 235 / 75 R 17.5'' twin wheels without ABS, approval max. 60 km/h Electrical system 12 Volt, LED rotating beacon Ramps with spring lifts, ramp length 2,800 mm Vehicle from ongoing production – delivery lead time approx. 14 days. plus freight/preparation ex stock Wiesmoor €1,280.00 / net Blsdpfellwhnsx Ahmok Towing vehicle LoF, agricultural or forestry registration Lease-purchase offer: term 48 months, residual value 40%, down payment only the VAT. Monthly rate: €599.00

Stanje: rabljeno, številka stroja/vozila: WFDFLT33902030001, lastna masa: 6.075 kg, največja dovoljena obremenitev: 32.925 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2023, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.000 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, skupna višina: 3.940 mm, vzmetenje: zrak, velikost pnevmatike: 435/50 R19,5", Pozor, na slikah so arhivske fotografije. Vozilo je lahko še v uporabi! "Preload" z blago prednapetostjo v območju vratu, sedelna plošča z zamenljivim 2" kraljevskim zatičem, zunanji okvir rahlo poševen - nova izvedba s profilom "Load-Lock" za obešanje napenjalnih trakov, 24 t dvostopenjsko podporno dvigalo, enostransko upravljanje. Stranski držalo vrat, zagozde za kolesa z nosilcem, bočna zaščita pred naletom iz aluminija, spodnja zaščita iz pocinkanega jekla, četrtinski blatniki pred 1. osjo in za vsako osjo, z blatom protivodno zaščito za vsako os, zadnji odbijač, obe strani z omejevalnikom za palete približno 15-20 mm visoko, v vijačeni izvedbi, vstopna višina se zmanjša za približno 15-20 mm, plastična orodjarna s predalom in odlagalno polico, š x v x g = 650 / 520 / 670 mm Osovine in vzmetenje: SAF kolutno zavorne osi, "osna/podvozna laserska izmera" za zmanjšanje obrabe pnevmatik in porabe goriva, zračno vzmetenje, 1. os samodejna dvižna os, vključno s prisilnim spuščanjem in funkcijo začenjanja, dvižna os pod priporočeno voznjo višino. Zavorni sistem: Dvovodni pnevmatski zavorni sistem z vzmetnim parkirnim zavorom, 2 nezamenljivi sprednji spojni glavi brez povezovalne cevi, EBS (elektronski zavorni sistem) z EBS vtičnico spredaj, brez povezovalnega kabla. Pozor: s funkcijo dvigovanja in spuščanja, višina vožnje v povezavi z dvižno osjo – pri dvignjeni dvižni osi se nakladalna oz. skupna višina poveča za 50 mm. Kolesa in pnevmatike: 435/50 R19,5", jeklena platišča. Elektrika: 24 voltov, večkomorni žarometi, 2 beli pozicijski luči spredaj, 2 belo/rdeči smerokazi zadaj, 2 x 7-polni in 1 x 15-polni nezamenljivi vtičnici spredaj, brez povezovalnega kabla. Tla: Približno 30 mm debele lepljene vezane plošče na vzdolžnih prečkah za visoko točkovno obremenitev, do največje osne obremenitve viličarja 7.100 kg. Bedpfxjzcmmzs Ahmslk Sprednja stena / sprednje stebričke: Višina 2580 mm, jekleni stebrički v volumenski izvedbi, sprostitveni mehanizem za stransko ponjavo na sprednji steni. Sredinski stebrički: 3 para pomičnih stebričkov po celotni dolžini, s 4 vložnimi žepi in spodaj z dolgim žepom. 3 para položajev stebričkov. Vložne letve: 5 vrst aluminijastih vložnih letev + variabilne letve. Zadnja stena / zadnji stebrički: Zadnji jekleni stebrički do spodnjega roba strehe, nosilci za ponjavo s cevjo in napenjalnim ragljo zapiralom. Ponjave: Ponjave z vgrajenimi vodoravnimi in navpičnimi trakovi, napenjalni zapiralci iz nerjavečega jekla. Streha: Fliegl-Blitz-Pokrivalo, pomična streha, zadnja stran visoko zložljiva, pokrivalo moč premikati od zadaj naprej, L-strešni nosilec za avtomobilsko industrijo, notranja širina med strešnimi nosilci cca. 2.490 mm, barva ponjave: bela (skupaj s pomično streho spredaj brez prednjega vozička). Država registracije / tablice: Nemčija, certifikat odobritve po EG 2007/46, 24/7-servisna telefonska linija, Fliegl certifikat proizvajalca o strukturalni trdnosti po EN 12642 XL, Fliegl certifikat proizvajalca o trdnosti po DL 9.5, omejevalnik palet na obeh straneh, pribl. 20 mm visok, vstopna višina se zmanjša za pribl. 20 mm, Fliegl certifikat proizvajalca o varnosti tovora po VDI 2700 list 12 ff. Omejevalnik palet na obeh straneh, pribl. 20 mm visok, vstopna višina se zmanjša za pribl. 20 mm, pripravljeno za enovrstni nosilec registrske tablice, opozorilna tabla po ECE - 70, reflektivni trakovi: beli, neprekinjeno spodaj po stranski ponjavi in zgoraj v vogalih, reflektivni trakovi: rdeči, ob robu zadnjega portala. P

Stanje: novo, največja dovoljena obremenitev: 16.390 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, skupna širina: 2.480 mm, skupna višina: 860 mm, Oprema: ABS, MAX Trailer 300 NEW | 7.0 m Loading Platform | 16.4 t Payload | Ramps | from €38,600 New vehicle – configurable to your specific requirements. Compact and robust low-loader trailer designed for the safe transport of machinery, equipment, and vehicles. Engineered for high payload, easy handling, and cost-effective operation in daily use. --- Highlights --- • Approx. 16,390 kg payload • 7,000 mm loading platform length • Rear chamfer for easy loading • Manually adjustable aluminium ramps • Ramp load capacity up to 24,000 kg per pair • BPW axles with air suspension • EBS braking system • Compact dimensions – ideal for construction sites & service applications --- Technical Data --- • Gross weight: 21,000 kg • Unladen weight: approx. 4,610 kg (±3%) • Payload: approx. 16,390 kg • Loading platform length: 7,000 mm • Total width: 2,480 mm • Loading height at max. load: approx. 860 mm • Coupling heights: 700 / 775 / 850 mm • Maximum speed: 80 km/h --- Standard Features --- • Loading platform with hardwood flooring (approx. 38 mm) • Tread plate covering over the axles • Lashing points up to LC 5,000 daN and recessed lashing rings in the frame • Cut-outs in the outer frame for tension belts • BPW axles, air suspension, drum brakes with lift/lower function • EBS braking system (2S/2M) with spiral cable • LED lighting ASPÖCK NORDIK • Tire pressure monitoring system TPMS (ECE R141) --- Included Options / Accessories --- • Drawbar approx. 1,750 mm with 50 mm towing eye • Galvanised steel front wall, approx. 400 mm • Spare wheel with holder on the drawbar • Manual support leg at the front • Galvanised folding supports under the loading platform chamfer • European rear reflector panels • White reflective tape on sides and rear • Beacon holder at the rear • Holders for warning signs including socket • Mud flaps with MAX logo • Additional number plate holder rear right Bjdpfxsypa Apo Ahmjlk • User manual & documentation on USB stick Further equipment and individual adaptations are possible at any time – we configure your vehicle exactly to your requirements. Sample photo. Equipment may vary depending on configuration.

Stanje: rabljeno, lastna masa: 6.770 kg, največja dovoljena obremenitev: 28.230 kg, skupna masa: 35.000 kg, prva registracija: 01/2023, naslednji pregled (TÜV): 01/2026, dolžina tovornega prostora: 14.800 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.000 mm, prostornina tovornega prostora: 110 m³, vzmetenje: zrak, velikost pnevmatike: 435/50R19.5, barva: modra, vrsta prenosa: drugo, velikost sprednje pnevmatike: 435/50R19.5, velikost zadnje pnevmatike: 435/50R19.5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, Kontaktna oseba za prodajo: Frank Rau / ruščina / angleščina / nemščina - Bachar Ibrahim / arabščina / angleščina / nemščina - Storitev za registracijo, tehnični pregled/glavni pregled/pregled varnosti, transport do pristanišča Osnovna barva: modra Bedpozmf N Isfx Ahmelk Dodatna oprema: ABS, EBS, vozilo pripravljeno za vožnjo, zračna vzmetitev, cena na zahtevo (mobilna povezava), diskovna zavora, video, vzmetitev: zračna, nosilnost (kg): 28230 Tip nadgradnje: MegaTrailer, dvižno streho, i-Lock, dolga tovornjak, 15,15 m, osi SAF, sistem Snow Free, HSN/TSN: 7951/000 Pridržana pravica do sprememb.

Stanje: rabljeno, lastna masa: 2.140 kg, največja dovoljena obremenitev: 7.860 kg, skupna masa: 10.000 kg, konfiguracija osi: 1 os, prva registracija: 11/2021, vzmetenje: zrak, velikost pnevmatike: 315/70 R22,5, Oprema: ABS, | M-trailer 1-osna lafeta (MT-03K1) | Skupna masa: 11.000 kg | Nosilnost: 7.860 kg | Pnevmantike: 235/75 R17,5 | Dvojna montaža | BPW osi z bobnastimi zavorami | Zadnja podpora | Pridržujemo si pravico do napak, vnosnih napak in predhodne prodaje. Bjdpoy Tnbvjfx Ahmolk

Stanje: rabljeno, največja dovoljena obremenitev: 28.531 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2011, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.900 mm, Oprema: ABS, Schmitz priklopnik 3-osni MEGA. Dvižna os. Tautliner s premično ponjavo levo in desno. Dvižna streha s hidravlično črpalko. Edscha, portalna vrata, mere: 13,60x2,48x2,90 m. ABS, EBS, orodjarna, visoka aluminijasta čelna stena, osi Schmitz, pnevmatike 445/45R19.5. Kolutne zavore/disc, pritrdilne ušesce, zračno vzmetenje, dviganje in spuščanje. =====Nemška registracija===== ===Dnevni odkup gospodarskih vozil, možna tudi menjava=== Cena: 3.200,- EUR netto. Bljdpfxszhzbie Ahmek

Stanje: rabljeno, največja dovoljena obremenitev: 28.531 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2011, Oprema: ABS, Schmitz priklopnik, 3-osni MEGA. Dvižna os. Tautliner s pomično ponjavo levo in desno. Dvižna streha s hidravlično črpalko. Edscha, portalska vrata, dimenzije: 13,60 x 2,48 x 2,90 m. ABS, EBS, orodjarna, visoka aluminijasta prednja stena, Schmitz osi, pnevmatike 445/45R19.5. Disk zavore, vezalne ušesca, zračno vzmetenje z dvigom in spustom. =====Nemška registracija===== ===Dnevni odkup gospodarskih vozil, možna menjava=== Cena: 3.200,- EUR neto. Bodpszf Tzpefx Ahmjlk

Stanje: rabljeno, največja dovoljena obremenitev: 28.531 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2011, Oprema: ABS, Schmitz priklopnik 3-osni MEGA. Dvižna os. Tautliner s premično ponjavo levo in desno. Dvižna streha s hidravlično črpalko. Edscha, portalna vrata, mere: 13,60x2,48x2,90 m. ABS, EBS, orodjarna, visoka aluminijasta čelna stena, osi Schmitz, pnevmatike 445/45R19.5. Kolutne zavore/disc, pritrdilne ušesce, zračno vzmetenje, dviganje in spuščanje. =====Nemška registracija===== ===Dnevni odkup gospodarskih vozil, možna tudi menjava=== Cena: 3.200,- EUR netto. Bljdszf Tziepfx Ahmsk