Broshuis Priklopnik Sedeža Z Delovno Ploščadjo nakup rabljenega (42.901)

Stanje: novo, največja dovoljena obremenitev: 30.080 kg, skupna masa: 40.000 kg, konfiguracija osi: > 3 osi, Leto izdelave: 2026, * T4 RM 40.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display option in the truck via EBS signal – without truck-side installation * Drum brakes * 4 x 11 t Gigant axles * Air suspension with manual lowering at the rear * Warning panel packages front & rear * SmartBord infotool installed with pressure sensors for total axle load display per axle group * Reflective contour tape on the sides and rear * LED rotating beacon (removable) at the rear * 15-pin power connector * LED tail lights * Straight drawbar with 50 mm towing eye and stepless height adjustment * Front closed single plastic mudguards * Straight rear steel mudflaps, each with spray suppression * Side underrun protection * Superstructure in front of the bogie platform approx. 520 mm with 45° corners and 3 storage compartments including lockable folding lids (folding lids opening to the rear) * Chassis made from high-strength fine-grained steel * Floor over the bogie platform made of 50 mm softwood, and 60 mm softwood in the low loader platform * Outer planks of the drive-on ramps made of 50 mm hardwood * Load securing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the bogie platform, 1 pair each of 13.4 t lashing rings at the front and rear outer frame, 1 pair each of 10 t lashing rings, swiveling and lowerable, loadable in all directions and recessed in the outer frame, 5 t lashing rings bolted to the outer frame of the wheel recesses (2 at the front recess, 1 at the rear), 2 pairs of 6.4 t lashing rings on the excavator stick holder * 11 pairs of folding outriggers for a total width of 3 meters (not at the rear slope) * Storage compartment (L = 2,470 x W = 570 x H = 250 mm) for the widening boards made of sheet steel, mounted transversely to the loading area in front of the first rear axle Ibsdexmpydspfx Anrjc * Excavator stick holder above the rear axle up to the end of the approach slope approx. 2,300 x 740 x 190 mm * Two wheel recesses per side approx. 640 mm wide – front 340 mm deep, rear 220 mm deep – with retractable cover (storage for covers at the front on the bogie platform) for transporting wheel loaders with a wheelbase of 3,100 - 3,640 mm * Mechanical drop-down supports at the rear * Hydraulic folding ramps with hydraulically extendable tip section approx. 4,650 x 720 mm * Hydraulic lateral ramp shift * Loading area over the turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm, loading height loaded approx. 890 mm +/- 20 mm (incl. 860 mm approach slope) * Chassis, bogie, folding outriggers, rear drop-down supports, and drive-on ramps galvanised * Axles, air tanks, and drawbar painted in black * Tires: 235/75R17.5 * Vehicle is galvanised * New vehicle with manufacturer’s warranty * Errors and prior sale reserved * Immediately available from Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 14.700 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2006, dolžina tovornega prostora: 10.350 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 850 mm, skupna širina: 2.550 mm, Skupna dolžina: 12.000 mm Nakladalna dolžina: pribl. 10.350 mm Širina: 2.550 mm / nakladalna širina pribl. 2.400 mm Nakladalna višina: pribl. 850 mm Dodatne informacije - Tretja os prisilno vodena - Notranja nakladalna višina pribl. 3.150 mm - Dvojne pnevmatike 215/75R17,5 - BPW osi - Zračno vzmetenje - Pomikajoča cerada Vozilo je lahko polepljeno z oglaševanjem, označeno in/ali z ostanki starih napisov. Ibodpfx Anjz Dzxkeroc Več enakih na zalogi

Stanje: rabljeno, prva registracija: 01/2014, Leto izdelave: 2014, Informacije v nemščini Letnik 2014, teža 2160 kg, delovna višina 17 m, stranski doseg približno 8 m, nosilnost 200 kg, hidravlične opore, 230 V Neto cena: 16.500 EUR, DDV 19 %, bruto cena: 19.635 EUR Pridržana pravica do sprememb in napak! Dodatne informacije Vrsta goriva: električno Področje uporabe: gradbeništvo Delovna višina: 1.700 cm Iedpfx Ansz Igicjrsbc DDV/davčna osnova: odbitljiv DDV Za dodatne informacije se obrnite na Philipa Müllerja, , p-).----Informacije v angleščini Vrsta goriva: električno Področje uporabe: gradbeništvo Delovna višina: 1.700 cm DDV/davčna osnova: odbitljiv DDV Valuta za najem: EUR Za dodatne informacije se obrnite na Philipa Müllerja, , p-).

Stanje: novo, največja dovoljena obremenitev: 38.620 kg, skupna masa: 50.000 kg, konfiguracija osi: > 3 osi, Leto izdelave: 2026, T5 Profile 50.0: ----Braking System: * Wabco EBS (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (when lifted, ride height +30 mm) * Last axle is self-steering (lockable from the cab for maneuvering purposes without any installation on the truck side, and additionally via a switch on the trailer). The lock must be disengaged before driving on public roads. * Forced lifting and lowering of the lift axle for maneuvering (truck-side installation required), with speed-dependent control via the EBS electronics ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: Drawbar 1,500 mm long with 50 mm draw eye and manual height adjustment ----Electrics / Lighting: Iedpfx Anjxptn Djrsbc * Smartboard as an info tool with pressure sensors for axle load indication per axle group * Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation) * LED lighting system 12/24 V * LED rotating beacon (removable), rear ----General Fittings: * Mechanical warning sign set for 3 m total width * Toolbox made of galvanized steel plate approx. 650 x 300 x 600 mm, mounted left side * Plastic fenders front axle and galvanized steel mudguards rear axle ----Low Loader Platform: * Front section of turntable platform with 45° corners and 3 stowage compartments with lockable folding lids (folding towards the rear) * Shortening of the low-bed platform by 500 mm to 6,280 mm including extended recess by 500 mm at the front * Rubber covering on the folding frame, approach ramp, and running surface of the low-loader platform * Bamboo wood between the longitudinal beams, in front of the excavator stick rest area ----Load Securing (LaSi Package): * 2 x 6.4 t lashing eyes in the front corners * 2 x 13.4 t UVV lashing points on each side in the front and rear corners * 5 x 10 t UVV lashing rings on each side (swivelable and lowerable, loadable in all directions) * 4 stake pockets per side with simultaneous 2 t lashing option * 1 x 16 t UVV lashing ring on the rear crossmember ----Width Extension: * Extendable and foldable width supports for 3 m total width (plank holder under the chassis, right side) ----Excavator Stick Rest: * Continuous excavator stick rest with reinforcement profile from last axle to end beam approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides of the excavator stick rest ----Ramps: * Hydraulic folding ramp with dual-circuit hydraulics and folding tip approx. 4,650 x 720 mm, including load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump outputs on the truck over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm adjustable via air suspension ----Loading Area Dimensions: * Platform above turntable: 2,600 + 390 x 2,520 mm * Low-bed loading platform: 6,280 + 500 x 2,520 mm, incl. 860 mm approach ramp ----Paintwork: * Chassis, turntable, drawbar, width extension consoles, ramps hot-dip galvanized * Drawbar yoke, axles, hydraulic axle supports and air tanks painted in black ----Information: * New vehicle with manufacturer warranty * Subject to prior sale and errors ----Delivery Time: Available immediately*

Stanje: rabljeno, največja dovoljena obremenitev: 7.200 kg, skupna masa: 9.000 kg, konfiguracija osi: 1 os, prva registracija: 03/2008, - Platform for ballast weights - 40 mm towing eye - 9 lashing rings - Drum brakes - Leaf suspension - Support legs Ibedpfxewfku Ao Anrjc - BPW axles All information subject to change / Prior sale reserved.

Stanje: novo, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, skupna širina: 2.540 mm, Leto izdelave: 2026, Oprema: ABS, WIESE Platform Trailer DS 18 PT-TL (Container / Twistlocks) * Vehicle type: Platform trailer / Container trailer * Manufacturer: WIESE * Model: DS 18 PT-TL – Container version ---Technical Data Ibsdpfx Anjy Eufforec * Axle load: 16,000 kg (2 x 8,000 kg) * Axles: 2 SAF axles * Tyres: 235/75 R17.5, twin tyres * Air suspension: yes * Ride height: approx. 890 mm unladen * Coupling height: approx. 700 mm * Width: approx. 2,540 mm ---Chassis / Superstructure * Platform trailer with twistlocks for container transport * Multiple container locks (fixed + extendable) * 6 pairs of lashing rings on the outer frame * Additional lashing points under the cross members * Reinforced outer frame with lashing holes * 27 mm birch plywood anti-slip floor * Galvanised omega profiles * Cross member spacing max. 400 mm ---Brake / Safety * EBS brake system (Knorr or Wabco) * ABS / Roll Stability Program * Dual-circuit air brake system * Basic tyre pressure monitoring * 2 air tanks (each approx. 80 L) ---Features * Complete LED lighting system * Side LED marker lights (flashing) * 15-pin electrical system * Rear underrun protection * Side impact protection * Plastic mudguards (180°) * Mud flaps with "WIESE" logo * Rear folding and extendable access ladder * Rear impact buffers ---Towing Equipment * 18t drawbar (fixed and extendable) * 40 mm drawbar eye * Turntable with slewing ring * Height adjustment available ---Miscellaneous * TÜV certificate available * Galvanised chassis * High-quality steel construction * Made in Germany For further information, please feel free to contact us.

Stanje: novo, največja dovoljena obremenitev: 30.440 kg, skupna masa: 40.000 kg, konfiguracija osi: > 3 osi, Leto izdelave: 2026, Oprema: ABS, T 4 Profi 40,0 ----Zavore: * Wabco EBS-E (električni zavorni sistem) * Naprava za hitro sprostitev zavore za vzmetne akumulatorske cilindre * Bobnaste zavore ----Osi: * 4 x 11 ton Gigant osi ----Vzmetenje: * Zračno vzmetenje z dvigalom in spuščanjem ter ventilom za ohranjanje višine ----Vlečna naprava: * Naravna vlečna naprava s 50 mm vlečno oglico in nastavljivo višino ----Elektrika / Osvetljava: * Sistem za nadzor tlaka v pnevmatikah z možnostjo prikazovanja na zaslonu tovornjaka preko signala EBS – brez dodatne namestitve na tovornjaku * SmartBoard kot informacijsko orodje z dajalniki tlaka za prikaz obremenitve osi na vsaki skupini osi * 15-polni vtič * LED zadnje luči * LED luči za osvetlitev vseh strani (odstranljive) zadaj ----Splošni dodatni deli: * Paketi opozorilnih tabel spredaj in zadaj * 2 x orodjna omara iz pocinkane, prašno lakirane jeklene pločevine, približno 650 x 300 x 600 mm, na desni strani * Spredaj zaprt, plastičen, posamični blatnik * Zadaj naravna jeklena ščitnika za blatnike, vsak z zaščito proti brizganju (zmanjševanje brizganja) * Stranski zaščitni sistem ----Nizka platforma: * Podaljšana platforma z vrtljivo podvozi za 520 mm, z 45° koti in 3 vgrajenimi predali z pokrovi, ki se lahko zaklenejo * Talna obloga nad platformo z vrtljivo podvozi iz 50 mm, v nizki platformi pa iz 60 mm iglavca * Gumijasta obloga 20 mm namesto lesene talne obloge na območju teka, z dolžino nizke platforme 6.780 mm, vključno z rampo za vožnjo * Gumijasta obloga na rampi za vožnjo, levo in desno, dolžine približno 860 mm * Na vsaki strani 4 žepi za nosilce (vendar nosilci niso vključeni), hkrati pa omogočajo pritrditev tovora z 2 tonami * Hidravlično nastavljivi stranski raztezniki za 3 m širine (vendar ne na zadnji rampi) * Stranske deske za razširitev, shranjene v predalu * Nosilec za roko bagra nad zadnjo osjo do konca rampe za vožnjo, približno D=2.100 mm x Š=740 x G=190 mm * 2 para pritrdilnih točk 6,4 tone, stransko v nosilcu za roko bagra ----Podvozje: * Podvozje iz visoko trdnega jekla z drobno zrnato strukturo ----Pritrditev tovora (paket Lasi): Platforma z vrtljivo podvozi: Ibsdpeylfvgjfx Anroc * 2 para 13,4-tonske pritrdilne točke v zunanjem okvirju platforme z vrtljivo podvozi Nizka platforma: * Na vsaki strani 4 pare 10-tonske pritrdilne točke na zunanjem okvirju, ki se lahko spustijo in so obremenljive v vse smeri * Na zadnji strani, na vsaki strani 2 para pritrdilnih točk 13,4 tone, vrtljivih ----Rampe: * Gumijasta obloga na zložljivih rampah za vožnjo * Hidravlično zložljive rampe z hidravlično nastavljivim vrhom, približno 4.650 x 720 mm * Hidravlična stranska premika rampe in ventili za zadrževanje tovora ----Zadnji opornik: * Hidravlični zadnji opornik ----Razširitev: * 8 parov pocinkanih zložljivih podaljškov za 3 metre skupne širine (vendar ne na zadnji rampi) * Stranske deske za razširitev, shranjene v predalu ----Nosilec za roko bagra: * hidravlična enota za razdelitev pretoka v prikolici (pri hidravlični moči črpalke v tovornjaku nad 40 - največ 120 l/min) ----Mere za nakladanje: * zadnja nakladalna površina: približno 6.780 x 2.520 mm (vključno z rampo za vožnjo 860 mm) * nakladalna površina nad vrtljivim obročem: približno 2.990 x 2.520 mm ----Višina nakladanja: * približno 890 mm, +/- 20 mm ----Barvanje: * Reflektirajoči obrobni trak na straneh in zadnji strani * Podvozje, vrtljiva platforma, rampe za vožnjo in zložljivi podaljški, vroče pocinkani * Osi, vlečna naprava, zračni rezervoar in vrt

Stanje: rabljeno, skupna masa: 76.500 kg, konfiguracija osi: > 3 osi, prva registracija: 12/2004, Oprema: ABS, Vehicle Identification No.: WG0STZH5A40025628 HYDRAULIC SUSPENSION Electro-hydraulics – NATO socket Kingpin load: 20,000 kg – Axle loads: 5 x 11,300 kg – Gross weight: 76,500 kg Unladen weight: 18,500 kg German MOT (HU) due Neck length: 4,100 mm Fifth wheel height: 1,350 – 1,380 mm = 3.5 inches Low bed: Length: 8,430 mm (530 mm tapered) – Width: 2,545 mm – Loading height: 880 – 920 mm TELESCOPIC by 5,275 mm with sliding deck CAN BE WIDENED WITHOUT timber inserts Hydraulic (height + side) split ramps – 2,700 + 1,500 mm – Width 850 mm Excavator trough Technical axle loads 5 x 11,300 kg BPW Eco axles with drum brakes AXLES 1, 2 = LIFTABLE Iedpey Sqr Usfx Anrebc Axles 5,6 = STEERABLE TRAILING AXLES Central lubrication system Tyres: 245/70 R 17.5 Modifications, prior sale, and errors are expressly subject to change. This description serves solely for the general identification of the vehicle and does not constitute a warranty in the legal sense. The description in the sales contract is binding. Our offer is generally without new roadworthiness certification (TÜV). Should you wish a new TÜV approval, we would be happy to provide you with an offer via our partner workshops! The vehicle may be stickered or labeled for advertising purposes. Our general terms and conditions of delivery and payment apply.

Stanje: rabljeno, največja dovoljena obremenitev: 64.900 kg, skupna masa: 94.100 kg, konfiguracija osi: > 3 osi, prva registracija: 08/2021, Odstranljiv »swan neck« (gosi vrat) * Površina nakladalnega prostora 3.750 mm x 2.480 mm Ibjdpoz Ivnuofx Anrec * Največja dovoljena obremenitev na sedlo (tehnična) do 30.000 kg (brez uporabe prednje osi) * Hidromehanska krmilna naprava z večkomornim hidravličnim cilindrom * Hidravlična funkcija dviganja in spuščanja * 2 oporni cilindri * Hidravlični diferencial * Upravljalni elementi hidravličnih funkcij na levi strani v smeri vožnje, vključno z manometrom z grafom za določanje obremenitve na sedlo ter manometrom za nadzor prednapetega tlaka v krmilni napravi * Stopnišče za dostop do »swan neck« * Hidravlična zaklepna naprava za prikolico ali osi * Večfunkcijska hitra spojka * Zračna pištola za čiščenje večfunkcijske hitre spojke Prednja os s 2 osmi * 4 kolesa na os, nihajna os z ležajnim obročem * Proizvajalec osi: BPW * Širina osi 2.750 mm / medosna razdalja 1.510 mm * Enoslojna pnevmatika Conti 245/70 R 17.5 143/141K (146/146 F), profil HT3, 3PMS * Hidravlično uravnavanje osi, hod 600 mm * Višina osi: 1.145 mm + 340 mm / - 260 mm * Dodatna možnost dviga vseh osi na prednji osi * Talna obloga iz jeklene pločevine * Dodatni nosilci za opozorilne table, nameščeni na prednji osi Zavorna naprava s sistemom TIM * Kolutno zavoro na vseh štirih kolesih, z zračnim tlakom in membranskimi zavornimi cilindri * Samodejna zavora, odvisna od obremenitve (ALB) (AGS) * Parkirna zavora s cilindri s vzmetjo * EBS / ABS (elektronski zavorni sistem), proizvajalec KNORR-BREMSE * Vtičnica za EBS na sprednji strani »swan neck« * Sistem za stabilnost vozila RSP (Roll Stability Program) Ravna prikolica, enostavno teleskopska * Dve zunanji, pravokotni notranji/zunanji cevi * Višina zunanjih cevi 300 mm * Širina nosilcev zunanjih cevi 730 mm + 120 mm opora * Sprednji del z oporo in zaklepno pripravo * Brez talne obloge med obema vzdolžnima nosilcema * (D x Š) 7.500 mm x 2.750 mm, teleskopsko podaljšana za 2.800 mm, največja dolžina 10.300 mm * S priključnim mestom * Višina nakladalnega prostora pri obremenitvi približno 450 mm, oddaljenost od tal približno 150 mm * Vključno s kratko, trajno varjeno nagibno ploščo na sprednji strani * In 1 par aluminijastih klinih, spredaj Zadnja os s 4 osmi * 4 kolesa na os, nihajna os z ležajnim obročem * Proizvajalec osi: BPW * Širina osi 2.750 mm / medosna razdalja 1.510 mm * Enoslojna pnevmatika Conti 245/70 R 17.5 143/141K (146/146 F), profil HT3, 3PMS * Hidravlično uravnavanje osi, hod 600 mm * Višina osi: 1.100 mm + 385 mm / - 215 mm * Talna obloga iz jeklene pločevine Kombinirana nakladalna prikolica s hidravlično lopato * (Dolžina x Širina) 5.770 mm x 880 mm / 1.538 mm * Zaščitna naprava proti brizganju vode z vodoodbojnimi preprogami na vseh osi * Aluminijasta pregradna pločevina v nakladalnem prostoru, spredaj in zadaj, vstavljiva Varovanje tovor «Swan neck» * 4 pari navojnih puš za pritrditev M30 * 1 par pritrdiščnih točk LC 20000 daN * 2 para pritrdiščnih točk LC 800 daN Prednja os * 3 pari navojnih puš M36 na nakladalnem prostoru (16.000 daN) * 1 par navojnih puš M36 na strani (16.000 daN) * 1 par pritrdiščnih točk LC 20000 daN Nakladalni prostor, ravna prikolica * 1 par pritrdiščnih točk LC 20000 daN * 3 pari pritrdiščnih točk LC 10000 daN * 3 pari navojnih puš M 30 * 3 pari navojnih puš M30 na notranji cevi Os * 2 para pritrdiščnih točk LC 10000 daN * 2 para navojnih puš M36 na nakladalnem prostoru (16.000 daN) * 3 pari vodilnih utorov 100 x 50 mm (LC 2000 daN) * 1 par navojnih puš M36 v nakladalnem prostoru z lopato (16.000

Stanje: novo, največja dovoljena obremenitev: 34.815 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 15.850 mm, skupna širina: 2.550 mm, skupna višina: 1.040 mm, Leto izdelave: 2026, Oprema: ABS, Kässbohrer SPA Mega Extendable HD Platform Trailer Immediately Available TECHNICAL INFORMATION: - Fifth wheel height: 950 mm - Overall length: 13,535 mm - Gooseneck length: 4,285 mm - Platform length: 8,950 mm - Extension: 6,900 mm platform extension - Extension locking positions: 500 mm intervals - Gooseneck height: 120 mm - Platform height (loaded): 1,040 mm - Wheelbase: 7,700 mm - Overall width: 2,550 mm - Gross technical weight (80 km/h): 45,000 kg - Gross technical weight (60 km/h): 46,000 kg - Unladen weight: 10,185 kg CHASSIS: - BPW axles with air suspension and disc brakes - 2x rigid front axles, 1x rear trailing steering axle - Air suspension including load gauge - 1st axle liftable - Wabco braking system - Tyres: 445/45 R19.5 - 1x spare wheel carrier FRAME: - Chassis made of high-quality, high-strength S700 MC steel - 30 mm hardwood floor - 8x2 extendable side extensions up to 300 mm - Telescopic support winch at front with 50t capacity - Mechanically folding rear supports with 45t capacity RAMPS: - Provisions for ramps at the rear of the vehicle Ijdpfx Anol N Syvjrjbc LOAD SECURING: - Lashing rings - Stake pockets - Container locks suitable for 1x20 ft, 2x20 ft, 1x40 ft, 1x45 ft - Steel front wall, 1,700 mm high, with Code-XL certificate ACCESSORIES: - 1x stainless steel toolbox - Stake holder at front wall - 2 x 2 oversize signs with LED lighting - Rotating beacon Chassis colour: RAL 3020 Traffic Red We are happy to provide further information upon request.

Stanje: rabljeno, največja dovoljena obremenitev: 14.700 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2006, dolžina tovornega prostora: 10.350 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 850 mm, skupna širina: 2.550 mm, Skupna dolžina: 12.000 mm Nakladalna dolžina: pribl. 10.350 mm Širina: 2.550 mm / nakladalna širina pribl. 2.400 mm Nakladalna višina: pribl. 850 mm Dodatne informacije Ibedpez Dzxdjfx Anrsc - Tretja os prisilno vodena - Notranja nakladalna višina pribl. 3.150 mm - Dvojne pnevmatike 215/75R17,5 - BPW osi - Zračno vzmetenje - Pomikajoča cerada Vozilo je lahko polepljeno z oglaševanjem, označeno in/ali z ostanki starih napisov. Več enakih na zalogi

Stanje: rabljeno, skupna masa: 133.000 kg, konfiguracija osi: > 3 osi, prva registracija: 11/2023, Oprema: ABS, Trailer - Vehicle Identification Number: XNJ55H5XX23H01262 - First registration: 29.11.2023 DOLLY - Vehicle Identification Number: XNJ33H5XD23H01262 - First registration: 29.11.2023 POWER HYDRAULICS with NATO socket – or machine hydraulics German registration Unladen weight: Trailer: 27,140 kg | DOLLY: 13,200 kg Fifth wheel height: 1,350 mm – Replaceable kingpin – 3.5" Front swing clearance approx. 1,732 mm ---- Hydraulic, detachable and height-adjustable swan neck – Length 4,020 mm Lowbed: Length: 8,000 mm Width: 2,870 mm – Loading height: approx. 560 mm TELESCOPIC extension by 5,800 mm Ibodjx Ialvepfx Anrec EXPANDABLE up to 3,240 mm Chassis frame: Length: 7,410 mm Width: 2,750 mm – Loading height: approx. 1,100 mm Total length with dolly: 24,622 mm / without dolly: 20,140 mm Excavator trough - dipper stick recess Central lubrication system BROSHUIS axles – PENDLE AXLES with drum brakes with radio remote control 5 x hydraulically suspended and forced-steered axles Axle loads: 5 x 12,000 kg Maximum fifth wheel load: 25,000 kg Tyres: 285/70 R 19.5 – Tread depth approx. 10 mm throughout Matching 3-axle DOLLY Hydraulically suspended axles Modifications, prior sale, and errors expressly reserved. The description serves for general vehicle identification and does not constitute a guarantee in the legal sense. The contractual vehicle specification is binding. Our offer is generally without new TÜV inspection. If a new TÜV inspection is desired, we are happy to provide an offer from our partner workshops! The vehicle may be covered with advertising stickers and/or decals. Our general terms of delivery and payment apply.

Stanje: rabljeno, Leto izdelave: 2002, 2002 Goldhofer STZ-L5-55/80: Na voljo v kratkem času. 5-osna prikolica za težke tovore. 1. os je krmilna. Isdpfxjzarf Dj Anrjbc 4. + 5. os sta krmilni. 3,5-palčni priklopnik. Ponudba je nezavezujoča in brez garancije. Pridržujemo si pravico do predhodne prodaje. Za rezervacijo je potrebna akontacija v višini 10 % kupnine. Do prejema plačila ne velja rezervacija ali pravica do razpoložljivosti. Kupoprodajna pogodba je sklenjena šele ob prejemu plačila. Vozilo ostaja last družbe MSG Andert GmbH do vključno plačila celotnega zneska. Plačila se sprejemajo izključno v evrih, brez dodatnih stroškov za prodajalca in samo prek bančnega nakazila. Ne sprejemamo čekov.

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.380 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, PT 30 Profile: ----Braking System: * EBS (electronic braking system) * Emergency release mechanism for spring-actuated cylinders * Drum brakes ----Axle: * 3 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering system, including RtR valve ----Drawbar: * Drawbar, 1,200 mm long, with 40 mm towing eye and height adjustment via traction spring & turnbuckle ----Electrical / Lighting: Isdetplwiepfx Anrsbc * Smart-Board information system mounted on the trailer (for axle load indication – separate front and rear display) * Tire pressure monitoring with display capability in the truck via EBS signal, no truck-side installation required * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear ----General Attachments: * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning board sets front and rear * Front axle plastic quarter mudguards with spray protection * Rear axle straight galvanized steel mud skirts with spray protection * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm, black powder-coated, mounted right side * Compartment in the bogie for accessories, with folding lid and 2 fixed container locks (directly behind the bogie platform) * 2 galvanized steps on the bogie, left and right ----Low Loader Platform: * Robot-welded non-slip overlay on the steel plate of the bogie platform (protruding weld seams) ----Load Securing (La-Si package consisting of): * 2 lashing eyes (13.4 t) front left & right on front bulkhead carrier * 1 pair of UVV lashing rings at front & rear (13.4 t) and 3 pairs of UVV lashing rings on each side (10 t), pivotable and lowerable, loadable in all directions, recessed in outer frame * 3 stake pockets on each side, each with 2 t lashing capacity * Profifix lashing rail in longitudinal axis, centered in flat area, for lashing up to LC 3000 daN ----Widening: * 6 pairs of mechanical folding outriggers for 3 m overall width (not in the rear taper) * Widening planks stored in the centre of the loading platform ----Ramps: * Hydraulic one-piece drive-on ramps, approx. 3,000 x 720 mm * Mechanically adjustable laterally * 4-way control block for future retrofit of hydraulic ramp lateral adjustment ----Excavator Arm Rest: * Excavator arm rest above rear axle, extending to the rear end crossmember (total length approx. 2,100 mm) * 2 pairs of lashing eyes LC 6400 daN in the excavator arm rest, located laterally in the main longitudinal frame ----Loading Height: * Loaded approx. 910 mm +/- 20 mm (air suspension) ----Paintwork: * Chassis, bogie, folding outriggers, drop-down supports and ramps hot-dip galvanized * Axles, slewing ring, air tanks, and drawbar painted in black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex Egestorf

Stanje: rabljeno, lastna masa: 6.140 kg, največja dovoljena obremenitev: 36.860 kg, skupna masa: 43.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2019, vzmetenje: zrak, velikost pnevmatike: 235/75R17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75R17,5, velikost zadnje pnevmatike: 235/75R17,5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, 8 x kontejnerskih zapiral, odprtine za stebre, pritrdilne ušesce, doplačilo za rampe: 1.500 €; vozilo je ponujeno po naročilu stranke; -- napake pri tisku, napake in spremembe so pridržane, vzorčne slike --, več podatkov na: !, več podrobnosti: ! Ibjdjz R Tg Aepfx Anroc

Stanje: rabljeno, največja dovoljena obremenitev: 6.320 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2013, dolžina tovornega prostora: 13.300 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 850 mm, skupna dolžina: 13.650 mm, skupna širina: 2.550 mm, Oprema: ABS, Nemško vozilo Zadnja vlečna os (z možnostjo zaklepanja) Osnovne osi BPW, Zračno vzmetenje, Dviganje in spuščanje, Različne pritrdilne točke, Dolžina tovornega prostora: zadaj 9,15 m spredaj 4,15 m Višina tovornega prostora: zadaj 0,85 m spredaj 1,03 m 4 kosi na voljo !!!!!Prodaja poteka brez ramp!!!!! Ibedpfsz Shr Aex Anroc Za več informacij pokličite Christiana Bredemeierja.

Stanje: rabljeno, največja dovoljena obremenitev: 53.980 kg, skupna masa: 70.000 kg, konfiguracija osi: > 3 osi, prva registracija: 02/2004, dolžina tovornega prostora: 15.510 mm, širina tovornega prostora: 2.750 mm, skupna dolžina: 15.900 mm, skupna širina: 2.750 mm, skupna višina: 3.800 mm, Oprema: ABS, Langendorf SATUE 50/52 – prikolica z nizko nosilno površino za bagre, nakladalnike itd. Šasijska številka: WLASTU5704WF57300 Datum prve registracije: 20. 02. 2004 5 osi SAF Osi 1–2 in 3 so dvižne osi Osi 1–2, 4 in 5 so hidravlično/prisilno krmiljene Hidravlično vzmetenje Bobnaste zavore z ABS Pnevmatike: 235/70 R17,5, približno 30 %/40 % preostale vzdržljivosti Skupna teža: 70.000 kg, prazna teža: 16.020 kg, nosilnost: 53.980 kg Dolžina podaljška: 416 cm Dolžina nizke nosilne površine: 1145 cm Širina: 275 cm, višina nakladalne površine v pogrebnih delih: 78 cm Višina nakladalne površine zunaj pogrebnih delov: 99 cm 2 podstavka zadaj Hidravlične nakladalne rampe Nakladalna površina v obliki korita Ibodpfxsz Sv Rfj Anrsc Pridržana pravica do sprememb, napak in vmesne prodaje.

Stanje: rabljeno, največja dovoljena obremenitev: 31.100 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2013, Leto izdelave: 2013, Oprema: ABS, * Faymonville F-S43-1ABA nizkopodvozna prikolica * Datum prve registracije: 03-2013 * hidravlično dvigovanje * hidravlično pomična dvojna zložljiva stranska ograja * vključno z vrvnim vitlom z radijskim upravljanjem * 3. os s krmiljenjem Ibsdpfxozq Nupe Anrec * osi SAF * zračna vzmet * bobnasta zavora * največja dovoljena masa: 10.900 kg * največja tehnično dovoljena masa: 31.100 kg * največja dovoljena skupna masa: 42.000 kg * pnevmatike 235 / 75 R 17,5 * več slik in videoposnetkov pošljemo prek aplikacije WhatsApp * Podatki so zgolj informativni in ne zavezujejo, pridržana pravica do spremembe.

Stanje: rabljeno, lastna masa: 9.520 kg, največja dovoljena obremenitev: 38.480 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2020, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5 140J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R17,5 140J, velikost zadnje pnevmatike: 235/75 R17,5 140J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Lashing eyes, -- Typographical errors, mistakes and changes excepted, sample images --, More data at: !, More details: ! Ibedpoz Ruuaefx Anrsc

Stanje: novo, največja dovoljena obremenitev: 14.550 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2024, ETÜ-TA-R 19.0 ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with manual rear lowering ----Drawbar / Towing Eye: * Drawbar with 50 mm flange towing eye and height-adjustable drawbar ----Electrics / Lighting: * TPMS (tyre pressure monitoring system) * 15-pin power connector * LED tail lights ----General Attachments: * Jost landing gear at the front * Outward folding rear supports * Tool box made of galvanized steel sheet, approx. 650 x 350 x 320 mm, mounted on the right side (powder-coated black) * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * Reinforcement package for drill rig transport on the chassis – loading height +20 mm * 50 mm softwood floor, clamped design * Preparation in front of the front wall for subsequent installation of container locks * Bolted smooth steel front wall * Fold-down trapezoidal-profile steel side walls with board-lift assist * Steel rear wall, slidable between ramps – storage bracket for unused position inside, in front of the headboard * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * Front and rear corners each fitted with 1 x 10 t lashing ring; multiple holes for 1.2 t lashing options in front and rear crossmembers ----Ramps: * One-piece, mechanical grate ramps with spring system for single-person operation, approx. 2,750 x 620 mm (retractable to 20 mm gap) * Rear access angle approx. 860 mm ----Tyres: * Wheelbase: 1,310 mm * Tyres: 235/75R17.5 ----Paintwork: * Chassis, drawbar, front wall, tailgate, rear folding supports, and ramps hot-dip galvanized * Axles, springs, air tanks and landing gear painted in a shade of black * Sideboard painting in RAL 9010 pure white * Painting of side walls in an individual RAL color available at extra charge ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale reserved ----Delivery time: * Immediately available from Egestorf Ibjdpopk D D Hsfx Anrsc

Stanje: rabljeno, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2017, * SAF osi * Kolesni izrezi * Hidravlične nakladalne rampe, nastavljive po širini * Zračno vzmetenje Ibedpewta Alofx Anrec * Možnost razširitve * Lastna teža: 11.020 kg ----Interna številka vozila: 11010----Napake in vmesna prodaja pridržane. WhatsApp podpora na voljo! Za vprašanja o vozilu ali dodatne informacije nam pišite udobno preko WhatsAppa WhatsApp nemško, angleško -- WhatsApp nemško, angleško, arabsko

Stanje: rabljeno, največja dovoljena obremenitev: 44.980 kg, skupna masa: 58.000 kg, konfiguracija osi: > 3 osi, prva registracija: 09/2024, naslednji pregled (TÜV): 09/2025, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Excerpt of the equipment list. Complete equipment details available upon request. Chassis, cranked * Special steel frame made of high-strength fine-grain steels, electrically welded at the joints, robust outer frame * 4-axle configuration. Wheel arch covers over the axles with spray suppression * All steel parts sandblasted * Side underrun protection mounted, made of anodised aluminum * Increased point load approx. 30,000 kg over approx. 4,000 mm * Special design in the cranked area for maximum low-bed length in combination with AluLeg drop supports instead of telescopic landing gears, maximum rear swing radius of the tractor unit approx. 2,100 mm Special superstructure with rear stake extension * Self-supporting aluminium roof beam / profile approx. 120 x 100 mm, sliding roof with plastic flaps * Rear stakes extendable to approx. 4,200 mm * Three sliding stakes per side with spring-assisted tension relief * Additional central stake locks in the roof beam and parking position, operated via pull cord and spring latch * Mechanically height-adjustable roof lift, adjustment height approx. 400 mm, can be operated from either side or single side without needing to open the opposite side and doors * Additional height adjustment of approx. 480 mm in approx. 40 mm increments with stake height adjustment * Front overlap at bulkhead for driving under tarpaulin up to an overall height of approx. 4,400 mm * Four rows of stackable approx. 150 mm aluminium slats on each side, 450 mm pockets below, above 4 rows of single pockets * In the high bed, only 3 rows of slats. Intermediate distances evenly distributed Floor * approx. 27 mm special water-resistant bonded beech plywood, non-slip surface * Steel plate in wheel arch area * Forklift accessible per DIN ? standard * Outer frame surface flush Brakes * WABCO air brake system with EBS complying with EC Directive 71/320 EEC incl. PREV (park-release safety valve) * Spring-loaded brake cylinders as parking brake * WABCO Smart Board with odometer and axle load display Axles * 4 x 10,000 kg SAF/Sauer with drum brakes, low loader specification * Air suspension with raise/lower function, total lift approx. 230 mm * Third and fourth axles are friction-steered trailing axles with electrical and mechanical locking Twin tires * 235/75 R 17.5, -16, incl. spare wheel holder. Without spare wheel Paintwork * Chassis in RAL 3002 red, solid color * Central stakes and axles KTL coated black * Corner posts galvanized finish * Plastic parts black Iodpelthgujfx Anrsbc * Galvanized parts unpainted * Rims in factory silver * Bodywork solid color per RAL shade Included special equipment * Air suspension with ECAS control, operated at the trailer * Oversize signage front and rear, galvanized, infinitely extendable, with marker lights incl. plug-in sockets for revolving beacons (small panels) * Additional unlocking for sliding roof frame from outside * 4 stake adapters for special outer frame profile, for flexible locking of central stakes * PVC sliding tarpaulin, color similar to RAL 9006 silver * Translucent roof tarpaulin, oversize/height version, flat hooks, tarpaulin folds, closures with safety pawl / OCS * Left rear telescopic plug-in socket for revolving beacon incl. beacon * Outer frame for machine transport with approx. 64 securing points in 2,000 kg, 3,000 kg and 10,000 kg versions, according to construction release drawing * 1

Stanje: rabljeno, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2011, skupna dolžina: 13.870 mm, skupna širina: 2.550 mm, Oprema: ABS, Zaradi številnih nepoštenih e-poštnih sporočil/e-poštnih sporočil ne bomo odgovarjali. Brez veljavnega tehničnega pregleda. nemška vozniška izkaznica / nemška prikolica Isdpfjz Nuibsx Anrebc 1. lastnik "PRIDRŽANE NAPAKE, TIPAŽNE NAPAKE IN MOŽNOST PRODAJE TRETJI STRANKI"

Stanje: rabljeno, največja dovoljena obremenitev: 38.080 kg, skupna masa: 50.000 kg, konfiguracija osi: > 3 osi, prva registracija: 01/2020, dolžina tovornega prostora: 19.450 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 810 mm, skupna širina: 255 mm, skupna višina: 2.150 mm, Oprema: ABS, Kel-Berg E50S4 Polpriklopnik z nizkim ležiščem Prva registracija: 23-01-2020 SAF osi 2x sledilni krmiljeni osi Bobnaste zavore z ABS in EBS Pnevmatike: 205/65 R17,5 35/40% Zračno vzmetenje Ibodpfx Anjxmpadorjc Skupna masa: 50.000 kg, Lastna masa: 11.920 kg, Nosilnost: 38.080 kg Dolžina labodjega vratu: 4,30 m, Dolžina nizkega ležišča: 8,85 m + 6,30 m teleskopsko Skupna dolžina nizkega ležišča: 15,15 m Širina: 2,55 m Višina nakladalne površine: 81 cm 2 zadnja podporna stebra Privezne zanke Vložne stranice Pridržujemo si pravico do napak/pisalnih napak in vmesne prodaje.

Stanje: rabljeno, največja dovoljena obremenitev: 47.500 kg, skupna masa: 57.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2016, skupna dolžina: 15.840 mm, skupna širina: 2.750 mm, skupna višina: 2.400 mm, Oprema: ABS, * lastna hidravlična enota * gooseneck prikolica z bočnicami * hidravlično krmljene osi * deljene osi * podaljšek do skupne dolžine 24.140 mm * razširitev tovorne površine do skupne širine 3200 mm * nastavljiva nizka platforma * radijski sistem * Wabco Trailer EBS-E * bobnasta zavora * podložni klini * rezervna kolesa ----* dimenzija pnevmatike: 245/70R17,5 * tehnično največja masa: 66000 kg Ibsdpfoz Rh Tiex Anrec * lastna teža: 7700 kg * skupna dolžina: 15840 - 24140 mm * SP (periodični tehnični pregled) zapade: / ----Številka vozila/Vehicle: 12527----Pridržana pravica do sprememb in napak.----Oglaševanje in različni napisi so bili digitalno odstranjeni.-----Z veseljem vam bomo pomagali pri vseh formalnostih, ki se pojavijo ob nakupu vozila. Enostavno nam sporočite vaše želje in predloge, mi pa bomo poskrbeli za ostalo. Med drugim vam lahko proti doplačilu ponudimo naslednje storitve:----Prevzem vašega starega vozila * Izvedba periodičnega tehničnega pregleda (TÜV/SP) * Celovita ureditev izvoza * Posredovanje pri financiranju * Ureditev izvoznih tablic * Prevoz vozil * Registracija vozil * Reševanje in transport vozil ----?VAŠA VTS EKIPA