Renders Priklopnik Z Delovno Ploščadjo nakup rabljenega (27.639)

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, * T 3: * ABS braking system * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle equalizer at the rear * Side underrun protection * Swivel supports at the rear chassis frame * Mechanically adjustable warning plate sets at front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel splash guards, each with spray protection * Reflective contour tape on sides and rear * Hinged lid (hot-dip galvanized) for the toolbox in the bogie platform * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted laterally under the chassis * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * Drawbar scissors with 40 mm towing eye and height adjustment via draw spring & turnbuckle * Four stake pockets per side (stakes not included), also usable for lashing * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform * Five pairs of UVV-compliant swivel and retractable lashing rings * Loadable in all directions; embedded in the external corners of the frame: 13.4 t, otherwise 10 t * Six pairs of mechanical folding outriggers for 3 m total width (not in rear slope) * Widening planks stored under the load area in a storage compartment * Digger boom tray above rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the tray) * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip section and load holding valves, hydraulically lateral ramp shifting * Hydraulic flow divider in trailer (when truck hydraulic pump output above 40 l/min up to max. 140 l/min), twin-line hydraulics * Load area above turntable: approx. 1,960 x 2,520 mm * Rear load area: approx. 6,500 x 2,520 mm (incl. 860 mm approach slope) * Loaded loading height: approx. 860 mm +/- 30 mm balance adjustment * Chassis, bogie, folding outriggers, drop supports at the rear and loading ramps hot-dip galvanized * Axles, springs, drawbar scissors, air tanks, etc. painted black * New vehicle with manufacturer warranty * Subject to errors and prior sale Hsdpfeq Dyv Iox Ag Iefg * Availability from week 19/2026

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.380 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * PT 30 Profile: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lift and lower system and RtR-valve * Smart Board installed on trailer as information tool (axle load display - separate for front and rear) * Tire pressure monitoring with display option in the truck via EBS signal without truck-side installation * Side underrun protection * Swivel supports at rear of chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle: plastic quarter mudguards with spray protection * Rear axle: straight galvanized steel skirts with spray protection * Contour tape on sides and rear, reflective * 15-pin power plug * LED lighting 12 / 24 V * LED beacon (removable) at rear * Drawbar 1,200 mm long with 40 mm towing eye and height adjustment via draw spring & turnbuckle * Toolbox made of galvanized steel approx. 650 x 300 x 600 mm, black powder coated, side right * Compartment in rotary frame for accessories with folding lid, 2 pcs. container locks permanently installed (directly after turntable platform) * ROBOT welded anti-slip coating on the steel plate of the rotary frame platform (protruding weld seams) * Load securing package consisting of: 2 lashing rings (13.4 t) at front left & right on front wall bearer, front & rear 1 pair of UVV lashing rings (13.4 t), and on each side 3 pairs of UVV lashing rings (10 t) pivotable and lowerable, loadable in all directions and embedded in the outer frame, each side with 3 stake pockets with simultaneous 2 t lashing option * 6 pairs mechanical folding outriggers for 3 m total width (not in the rear taper) Hfedpjtplwijfx Ag Ieg * Extension boards stored in the middle of the loading area * Hydraulic one-piece drive-on ramps approx. 3,000 x 720 mm * Mechanically laterally adjustable * 4-way control block for later retrofitting of hydraulic ramp shift * Excavator arm storage over rear axle, continuous to end crossmember (total length approx. 2,100 mm) * 2 pairs of lashing rings LC 6400 daN in excavator arm storage at side in longitudinal frame * 2 steps galvanized at rotary frame left + right * Profifix lashing strip centered in longitudinal axis, in flat area for lashing up to LC 3000 daN * Chassis, turntable, folding outriggers, drop supports, and drive-on ramps hot-dip galvanized * Axles, slewing ring, air tank, tow bar painted in black tone * Loading edge loaded approx. 910 mm +/- 20 mm air suspension * New vehicle with manufacturer warranty * Errors and intermediate sale excepted * Available approx. from week 22/2026 * Sample images

Stanje: novo, skupna masa: 32.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 12.300 mm, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, Wiese 2-Axle Step Frame Platform Semi-Trailer with Fassi F545 Crane Mega Lowliner Hfjdjn Hrtgepfx Ag Isg Chassis Welded construction with cross members, manufactured entirely from high-grade steel Neck height: approx. 220 mm including coupling plate Equipped with all necessary chassis reinforcements and cross connections Axles 2 BPW axles, each with 10,000 kg load capacity, fitted with 17.5" drum brakes ABS: 1 axle monitored Axle spacing: 1,810 mm Tyres 8 units, type 235/75 R17.5 Rims Aluminium rims, 10-hole, hub-centric, offset = 122 mm Lighting System 24V lighting system in accordance with EU Directive 76/756/EEC and subsequent amendments, featuring: 2x2 three-chamber LED tail lights 1x LED reversing light 1x LED fog light LED side marker lights Lane departure lights Number plate illumination 2x 7-pin sockets + 1x 15-pin socket wired as per EU standard Floor Galvanised grating floor in the low-bed area Steel chequer plate in axle area Load Securing Outer frame with D030 mm lashing hole profile on the bevel 2x12 lashing points, 8,000 daN in the outer frame 3 rows of combo stake pockets for 80x80 mm insert stakes in the low-bed area Accessories 2x wheel chocks with holder Spare wheel carrier winch 2x toolboxes with slide-out drawer (for chain storage) Surface Protection Steel structure: blasted and primed Paint Finish Chassis/frame/floor frame: single colour in RAL 3020 (traffic red) Axle hubs: single colour in RAL 3020 (traffic red) Axles: KTL-coated black Rims: Aluminium Durabright With Fassi F 545 RA.2.28 XE-Dynamic Hydraulic outriggers Additional stabiliser beams 360° working range Approx. 90% lifting capacity towards the front For further information please do not hesitate to contact us.

Stanje: novo, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.820 mm, širina tovornega prostora: 2.480 mm, skupna širina: 2.550 mm, skupna višina: 3.284 mm, Leto izdelave: 2026, Oprema: ABS, Vehicle Information - Load compartment length: 13,820 mm - Height: 3,284 mm - Width: 2,550 mm - Internal load compartment length: 13,620 mm - Internal load compartment width: 2,480 mm - Coupling height: 1,150 mm - Gross vehicle weight: 36,000 kg - Unladen weight: 6,530 kg - Container locks for the following containers: - 1 x 40', 2 x 20', and 1 x 20' center-mounted up to 25 t _____ Axles - KRONE axles with disc brakes - 1st axle: lift axle - Air suspension - Wheel chocks - Axle cap KM counter - Tyre brand: as per manufacturer's choice: 385/65 R22.5 - KRONE TPMS control unit - EBS - Steel rims - KRONE air-suspended assembly + trailing steering axle _____ Superstructure / Accessories - Mechanical landing legs - Steel front wall with reinforced corner stanchions, 2,000 mm high - Front wall reinforcement inside with 9 mm thick panel - 2 warning signs - 2 sets of oversize signs including outline marker lights - Closed pallet storage box for 24 Euro pallets - Stanchion depot on left and right for 6 plug-in stanchions - Forklift holder - Retractable underrun protection - KRONE Telematics KSC ProPlus Dry 2 - Max. 7,000 kg forklift axle load - 30 mm thick waterproof flooring _____ Lighting / Electrical - LED side marker lights with direction indicator - Rotating beacon (orange) incl. pole mount - Multifunction rear lights (full LED), manufacturer: Hella (Gen.2) - 2x LED license plate lights _____ Paintwork - Chassis: jet black – RAL 9005 - Axle hub: jet black – RAL 9005 - Front wall: light grey – RAL 7035 Hfsdev E Tpdepfx Ag Ijg - Rims: natural silver

Stanje: novo, največja dovoljena obremenitev: 37.363 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, skupna širina: 2.540 mm, Leto izdelave: 2026, Oprema: ABS, Kässbohrer SPS Maxima Heavy Duty Platform Semi-Trailer TECHNICAL INFORMATION: * Fifth wheel height: 1,150 mm * Platform length: 13,600 mm * Gooseneck: 180 mm * Platform height (loaded): 1,300 mm * Wheelbase: 7,700 mm * Axle spacing: 1,360 mm * Overall width: 2,540 mm * Technical gross weight (80 km/h): 45,000 kg * Technical gross weight (60 km/h): 46,000 kg * Unladen weight: 7,637 kg RUNNING GEAR: * BPW axles with air suspension and disc brakes * Air suspension incl. load gauge * 1st axle liftable * Wabco brake system * Tyres: 385/65 R22.5 CHASSIS: * Chassis made of premium, high-strength S700 MC steel * 30 mm hardwood floor * Jost landing gear LOAD SECURING: * Lashing rings * Stake pockets * Removable stakes * Container locks * Front wall made of steel, 1,500 mm high ACCESSORIES: * 1x PVC-coated steel toolbox, 1,500 mm x 480 mm x 450 mm * Stake storage at the front wall * Steel side underrun protection Colour: RAL 3020 Traffic Red Hfedpfx Asi Rtfajg Ijg For further information, please do not hesitate to contact us.

Stanje: novo, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, Brand-new Krone SDP 27 platform semi-trailer (sample images) * Coupling height: 1,150 mm * Multilock outer frame, universal load securing options every 100 mm * Pallet box for 24 Euro pallets * 10 pairs of stake pockets in the outer frame * 10 central stake pockets in the floor * 12 plug-in stakes, 1,950 mm long * 4 pairs of lashing points for sea transport Hsdpfevw Hmajx Ag Ijfg * Container locks for 1x40', 2x20', 1x20' (centered) up to 25 t * Two mechanical landing legs * Krone axles with air suspension and disc brakes * Wheelbase: 1,310 mm * Air suspension with lifting and lowering device, including automatic ride height reset * Load-dependent, fully automatic electronic lift axle control for 1 axle * Axle cap mileage counter * 6 x 385/65 R 22.5 tyres * Spare wheel carrier (basket variant) * Wabco braking system * LED lighting * Multifunctional rear lights * 1 reversing light * Plastic toolbox * 2 sets of oversize signs including marker lights * Stake depot, left and right sides * 30 mm thick, waterproof plywood floor * Steel front wall, 2,000 mm high * Steel components shot-blasted, KTL-primed and powder-coated * Chassis incl. outer frame, RAL 9005 deep black * Axles incl. wheel hubs, RAL 9005 deep black For further information, please do not hesitate to contact us.

Stanje: novo, največja dovoljena obremenitev: 35.442 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 16.550 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 1.350 mm, skupna širina: 2.540 mm, Leto izdelave: 2026, Oprema: ABS, Brand new Kässbohrer Maxima extendable tele HD platform semi-trailer Immediately available TECHNICAL INFORMATION: * Coupling height: 1,250 mm * External length: 13,535 mm * Gooseneck length: 4,285 mm * Platform length: 9,100 mm * Extension: Up to 7,450 mm platform extension * Extension locking position: 500 mm * Gooseneck height: 180 mm * Wheelbase: 8,130 mm * Axle spacing between 1st and 2nd axle: 1,360 mm Hfsdpfxelz Hlij Ag Ijg * Axle spacing between 2nd and 3rd axle: 1,810 mm * Axle load: 9 tonnes technical load capacity * Axle load total: 27,000 kg * King pin capacity: 18,000 kg technical king pin capacity * Total width: 2,540 mm * GVW (at 80 km/h): 45,000 kg * GVW (at 60 km/h): 46,000 kg * Tare weight ±3%: approx. 9,558 kg * Swing door at rear: 2,450 mm RUNNING GEAR: * Number of axles: 3 pcs * BPW axles with air suspension and disc brakes * Both front axles are fixed, the rear axle is steering * Air suspension incl. 1 load gauge * Overload-sensitive manual axle lift on 1st axle * Wabco EBS 4S/3M braking system * ABS, electro-pneumatic dual-circuit braking system * 24V lighting system with 2 x 7-pin + 1 x 15-pin sockets * Tyres: 6 x 385/65 R 22.5 CHASSIS: * High-quality, high-strength S700 MC steel chassis, ISO 1726 compliant * 2 mm omega-profile reinforced 30 mm hardwood flooring * 2” king pin with bolted connection * Mechanical landing gear: front telescopic support legs with 50-ton static capacity LOAD SECURING: * Lashing rings * Stake pockets * Removable stanchions * Container locks suitable for 1x20 ft., 2x20 ft., 1x40 ft., and 1x45 ft. containers * Steel front wall, 1,500+500 mm high, with Code-XL certificate ACCESSORIES: * 1 stainless steel toolbox, 1,000 mm x 500 mm x 500 mm (W x D x H) * Standard access ladder * Side underrun protection, steel, according to regulation 89/297/EEC * Stanchion box: 6 pcs, mounted on front plate * 2x2 oversize panels with LED lighting * Rotating beacon PAINT: * Chassis colour: RAL 3020 Traffic Red For further information, please do not hesitate to contact us.

Stanje: novo, največja dovoljena obremenitev: 10.360 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 14.4: ----Brakes: * Electronic Brake System (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * Gigant axles ----Suspension: * Air suspension with lift and lower facility ----Drawbar / Flange Eye: * Drawbar height adjustable by approx. 300 mm * 40 mm flange drawbar eye ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System with in-cab display via EBS signal; no truck-side installation required) * LED lighting system * 15-pin power connector ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding support legs at the rear * Plastic toolbox, front right, mounted outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood flooring * Provision for retrofitting 20" container locks at front and rear * Bolted bulkhead made of smooth sheet steel * Fold-down side walls, trapezoidal profile, with drop-side spring assists * Bolted, hot-dip galvanized rear stanchions ----Load Securing: * Outer frame with holes, approx. 45° angled, 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * Each of the front and rear corners fitted with 1 x 6.3 t lashing ring * Various holes in front and rear cross members for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t per pair), suitable for pneumatic and tracked vehicles; stowed at the rear in a compartment integrated below the deck in the chassis ----Paintwork: Hfsdpfx Agopk D Dqo Ijg * Hot-dip galvanized chassis, drawbar, bulkhead, and rear wall * Vehicle fully hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Subject to error and prior sale ----Delivery Time: * Available immediately ex Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 24.000 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2008, Welcome to Johanning's Commercial Vehicles, your specialist for nearly new and exclusive used vehicles. Hsdpjvmlbnjfx Ag Iofg Available immediately! Delivery & financing available. Location: 39606 Osterburg • Manufacturer: Wilken Oldenburg • Semi-trailer • 3 axles • New MOT (TÜV) valid until December 2025 • Tyres approx. 70% • 3rd axle steering and lifting • Tail lifts Johanning’s Commercial Vehicles – your partner for exclusive and low-mileage used vehicles. Our services – your benefits: (after sale) - Trade-in of your vehicle possible (any condition) - Immediate deregistration of your vehicle free of charge - Registration service for €150 (incl. fees and license plates) - Short-term registration option - Viewing and test drives possible at any time by prior telephone arrangement - Delivery to your door available by arrangement Errors and prior sale excepted.

Stanje: novo, največja dovoljena obremenitev: 63.960 kg, skupna masa: 76.500 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete vehicle stock, including immediately and soon-to-be available vehicles, on our website. Excerpt from the equipment features. Full equipment details available upon request. Chassis: * Welded construction made from high-quality steel profiles with punched cross members, designed for high point load capacity * Outer frame: UNP steel Towing device: * 2-inch king pin Underrun protection: * In accordance with EC regulations, bolted design Side impact protection: * In accordance with EC regulations Landing legs: * Landing legs with single-side operation, support load approx. 66 t/lifting capacity approx. 24 t Axles: * 5 x 10 t air suspension axle assemblies, SAF brand, with drum brakes approx. 400 x 200 mm * ABS * Centrally located 10-hole wheel connection with offset ET 0 * Total air suspension lift approx. 200 mm, raising approx. 140 mm and lowering approx. 60 mm, controlled via rotary slide valve with lock function Steering: * 1 axle self-steering at the front, 2nd axle fixed, 3rd, 4th, and 5th axle forced steered via linkage * Centralized lubrication points positioned externally Axle lift: * First and second axles can be raised automatically, with additional deactivation on the chassis Brake system: * Two-line air brake system according to EC regulations with EBS and RSS, automatic load-dependent control, Wabco 4S/3M brand * Spring chamber cylinders as parking brake, anti-mistake coupling heads permanently mounted to the front panel, without connection line to the tractor unit Hfsdpfx Agowx Dcaj Iog * Aluminium air reservoirs Tyres: * 10 x 445/65 R22.5 164J on 11.75 x 22.5 ET 0 rims – Manufacturer of our choice TPMS: * Tyre Pressure Monitoring System (TPMS) according to ECE R141, with data transmission to the tractor unit Mudguards: * In accordance with EC, 1st axle front, 2nd axle rear, 3rd, 4th, and 5th axle each front and rear with a 1/4 PVC mudguard * Rear mudguards with spray flaps Load securing: * 5 pairs of foldable lashing rings, evenly distributed (lashing capacity approx. 14 t) * 11 pairs of hook plates welded into the outer frame (lashing capacity approx. 3 t) * 10 pairs of side lashing rings welded into outer frame, evenly distributed (lashing capacity approx. 8 t) Stake pockets: * 10 pairs of stake pockets recessed into the outer frame * 6 pairs of stake pockets recessed into the floor (on the outer longitudinal frame) Insertable stakes: * 16 galvanized insertable stakes, approx. 80 x 80 x 8 mm, approx. 850 mm usable length Stake magazine: * One magazine for 8 insertable stakes (approx. 80/80 mm) on each side in front of the front wall Front wall: * Bolted corner posts, filled with aluminium hollow profiles, internally with a steel impact plate over full width and height Floor: * Approx. 28 mm Z-hardwood floor recessed into the outer frame, flush-mounted Lighting system: * According to EC, 24 Volt with multi-chamber lights * LED side marker lights * LED position lights white at the front * LED outline lights rear * Number plate lights 1x15 and 2x7-pin connector at the front panel Equipment: * Two wheel chocks with holder * Warning panel as per ECE 70 * Work spotlight on light carrier (activated by reverse gear) * Holder for rotating beacon at the rear (including beacon) * Fixed access ladder on both left and right, including plug-in step * Smart Board * Sticker: "Vehicle swings out" and load center of gravity indication Paintwork: * Chassis and front wall blast-cleaned and high-quality top-coated * Chas

Stanje: rabljeno, največja dovoljena obremenitev: 7.200 kg, skupna masa: 9.000 kg, konfiguracija osi: 1 os, prva registracija: 03/2008, - Platform for ballast weights - 40 mm towing eye - 9 lashing rings Hfjdpfxjwfku Ae Ag Iog - Drum brakes - Leaf suspension - Support legs - BPW axles All information subject to change / Prior sale reserved.

Stanje: rabljeno, največja dovoljena obremenitev: 15.150 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 10/1994, ? Platforma za balastne uteži ? 50 mm vlečna očesca ? 4 x pritrdilna očesa Hfsdpsw Sqilofx Ag Iog ? Bobnasta zavora ? Listnato vzmetenje ? Podporna stojala ? SAF osi Vsi podatki brez garancije / Vmesna prodaja pridržana.

Stanje: rabljeno, največja dovoljena obremenitev: 12.100 kg, skupna masa: 16.000 kg, konfiguracija osi: 2 osi, prva registracija: 01/2011, dolžina tovornega prostora: 7.400 mm, širina tovornega prostora: 2.500 mm, Oprema: ABS, * ABS * Rotating beacon, orange Hfedpjvy Nw Tsfx Ag Iog * Duomatic air coupling * 5-chamber rear lights * Front landing gear * BPW ECO axles ----Body: Open platform (loading height approx. 950 mm), hardwood floor, rear extendable by 1,685 mm, 4 pairs of extendable container locks (twist locks), stainless steel toolboxes. Sale exclusively to business customers. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE, INCLUDING EQUIPMENT & ACCESSORIES. Our General Terms and Conditions (see Legal Notice) form the basis of all purchase agreements, invoices, pro forma invoices, orders, and sales discussions.

Stanje: novo, največja dovoljena obremenitev: 56.570 kg, skupna masa: 66.500 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Extract from the equipment features – full specifications available upon request. Chassis: - Chassis frame construction made of welded longitudinal beams and pass-through cross members - Rear under-run bar approx. 700 mm wide - Fifth wheel plate at least approx. 8 mm thick, positioned between the longitudinal beams - Cross member spacing max. 400 mm (for longitudinally laid floor) - King pin 3.5 inch according to SAE standard, replaceable - Outer frame as UNP 200, open to the outside Landing Gear: - 24 t telescopic landing gear JOST -MODUL CH (Heavy Duty) S-foot Axles: - 4 x 10 t SAF axles with large drum brake - 22.5 single tires - Axle distances approx. 1,700/1,810/1,810 mm - Air suspension unit, each with 10 t lifting capacity, lifting and lowering device with 1 rotary slide valve Knorr/Wabco - Holder for lifting and lowering device, bolted version Brake: - Smartboard/TIM/Infocenter at the lifting/lowering gear bracket, in addition to the lift/lower valve, without battery (operable only with towing vehicle) - Holder for light and brake at the front, mounted on the underrun bar, total height approx. 700 mm - Tire pressure monitoring basic version, connected to the EBS CAN bus system - With dual release valve for brake and spring actuator - Test nipple for brake cylinder pressure at right front brake cylinder - 1 red and 1 yellow coupling head each - Lifting/lowering device mounted in driving direction rear left - EBS braking system Wabco make, CAN bus EBS diagnostics (EBS plug), no diagnostic cable led outside! Tires: - 8 x 445/65 R 22.5 premium brand tires of our choice - Central centering Lubrication: - Grease nipple strips at the bogies and at the steering front. No central lubrication Superstructure: - Without body certificate according to DIN EN 12642 XL - 2x LED work lights on top of the front wall (facing rear), switch at the lift/lower bracket - Front wall for platform, reinforced version - Side contour marking yellow, rear yellow - Front wall approx. 800 mm high, with sheet metal cladding, bolted version Hfedpfxewx Dcte Ag Ieg Lighting: - 2x LED work lights, mounted in lamp panel, switched via reverse gear - 2x LED work lights, switched via reverse gear, 1 each side near landing gear - 2x LED reversing lights, 1 per side in front of the 1st axle - Lighting/wiring system brand of our choice - Number plate lighting - The towing vehicle must provide sufficient electrical capacity for the chosen lighting (esp. reversing light) - Position marker lights at the front, lower, white, 1 per side left and right (LED) - 24V lighting system with large multifunction rear lamp - Side marker lights (LED) flashing - 1x 15-pin and 2x 7-pin sockets in multifunction box at the front - EBS socket output - 1 pair lane keeping lights (LED) Floor: - Hardwood floor approx. 28 mm, alternating with galvanized omega steel profiles Paint/Coating (no metallic shades): - Chassis painted in RAL color of choice - Front wall (steel construction) in RAL color of choice - Axle hubs matching chassis color - Axles and landing gear black - Wheels in aluminum/silver similar to RAL 9006 - Wheel nuts untreated - Under-run protection painted RAL 9010 pure white (aluminum) Accessories: - Lifting device for 1st axle - 9 welded lashing plate hooks per side in the outer frame, lashing capacity max. 3,000 daN each - 12 RUD-SLP lashing points per side with

Stanje: rabljeno, največja dovoljena obremenitev: 29.000 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2008, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 500 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 2008, Oprema: ABS, * Manufacturer: Wilken * Trideck forced steering, 3rd axle Hodpswaph Rofx Ag Isfg * Lift axle * Mounting bracket for truck-mounted forklift * 500 mm aluminum side walls * SAF axles * Full air suspension * Disc brakes

Stanje: novo, največja dovoljena obremenitev: 2.110 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.050 mm, širina tovornega prostora: 1.550 mm, višina nakladalnega prostora: 200 mm, B27300/150 MACHINE TRANSPORTER TECHNICAL DATA * Trailer type: B27300/150 * Gross vehicle weight: 2,700 kg * Payload: 2,075 kg * Internal dimensions: L: 305 cm, W: 155 cm, H: 20 cm * Loading height: approx. 54 cm * Floor: multiplex wooden floor * Integrated lashing points recessed in the loading floor * Side walls: steel * Frame: welded steel, hot-dip galvanized by immersion * Electrics: 13-pin, 12V * Tyres: 185R14C * Axle manufacturer: AL-KO or KNOTT * Number of axles: 2 * Braked axles * Standard jockey wheel * Walkable steel mudguards * Shovel holder * Rear support stands * Loading ramps – 200 cm Hfedpfx Agothlrhe Ieg plus vehicle registration document/COC certificate €39.00 All prices include VAT. Images may not correspond to the standard equipment. Technical changes (e.g. tyre sizes) reserved. Delivery: Delivery by forwarding agent possible, €1.50 per transport kilometre one-way throughout Germany (from Seesen to the destination), at least €270 plus VAT. Visit us also at Here you can also order your desired trailer and accessories upon request: BLYSS Transporttechnik GmbH Dieselstr. 8 85084 Reichertshofen Tel.: BLYSS Transporttechnik GmbH Burenkamp 18-20 46286 Dorsten - Wulfen Tel.: FINANCING OR LEASING POSSIBLE* Vehicle number (for customer inquiries) Images may not correspond to standard equipment. Technical changes (e.g. tyre sizes) reserved.

Stanje: novo, skupna masa: 1.500 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 3.750 mm, širina tovornega prostora: 2.200 mm, višina nakladalnega prostora: 2.300 mm, Trade Fair Trailer Event Promotion HBA375 Hjdpjxw Dt Tjfx Ag Iofg Please use 0566 for inquiries. * Permissible total weight: 1500 kg * Internal dimensions: 375x220x230 cm * Chassis: single-axle, high-loader, steel/galvanized with 4 retractable support legs * 10-inch tires * Automatic reverse mechanism and jockey wheel * 13-pin connector plug * Superstructure: white UV-resistant polyester sandwich panels, white painted profile strips * Walls and ceiling approx. 25 mm thick * Full-depth side flap on the right (in direction of travel) * Folding aluminum staircase with railings/handrails on both sides, including flag holder slots Plus €39 gross for vehicle documents/COC. We will send these by registered mail or hand them over in person upon receipt of (down) payment. Please contact us before visiting, as this trailer may already be sold despite our large on-site stock. By phone, you can find out if your desired trailer is immediately available – we are happy to also order new units to your specifications (dimensions, weight, equipment, etc.). Due to the large number of trailers in stock, mistakes can occasionally occur – please bear with us. Information regarding specifications and prices may contain errors.

Stanje: novo, največja dovoljena obremenitev: 11.400 kg, skupna masa: 15.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 12.000 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 850 mm, skupna širina: 2.550 mm, Leto izdelave: 2026, Metal-Fach T009 Bale Trailer 3-Axle Platform Trailer Flatbed Trailer New Vehicle Year of Manufacture: 2026 Overall dimensions: 11990mm + 800mm x 2480mm x 2900mm Internal dimensions: 9300mm + 800mm x 2380mm x 1875mm Gross weight: 15,000 kg Unladen weight: 3,560 kg Payload: 11,440 kg Loading height: 1,160 mm Tyres: 500/50-17 Extendable loading platform Wide tyres Air brake system Load-dependent brake force regulator (ALB) Side underrun protection Side lighting Parabolic suspension Parking brake Adjustable front and rear loading grids Y-drawbar 40 km/h road approval possible Mudguards Custom paint available !!! ATTENTION – PLEASE READ !!! We expressly reserve the right to prior sale, as this item is also listed on other platforms. We strongly recommend inspection and verification to avoid any misconceptions regarding condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged!!! Images are for illustration purposes and may show optional accessories at additional cost. The internal dimensions stated are approximate values. TRADE-INS POSSIBLE FOR ALMOST ANYTHING!!! PART-EXCHANGE DEALS AND SURCHARGE POSSIBLE!!! Showground: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday – Friday 8:30 am to 5:00 pm, Saturday 8:30 am to 2:00 pm Always over 500 new and used trailers in stock!!! Hfodpfx Agetw N D Sj Ijg Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Stanje: novo, največja dovoljena obremenitev: 9.000 kg, skupna masa: 11.600 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 9.080 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 850 mm, skupna širina: 2.550 mm, Leto izdelave: 2026, Metal-Fach T014/2 Bale Trailer 2-axle Platform Trailer Flatbed Trailer New vehicle Year of manufacture: 2026 Overall dimensions: 9089mm + 800mm x 2520mm x 2880mm Internal dimensions: 6409mm + 800mm x 2380mm Loading height: 1150mm Gross weight: 11,600kg Empty weight: 2,600kg Payload: 9,000kg Tyres: 400/60-15.5 Extendable loading platform Wide tyres Air-braked ALB valve Side underrun protection Side lighting Parabolic suspension Parking brake Adjustable front and rear loading gates Y-drawbar 40km/h road approval possible Mudguards Custom paint possible IMPORTANT!!!! PLEASE READ!!!! We expressly reserve the right of prior sale as this item is also advertised on other platforms. We strongly recommend an inspection and review to avoid any misunderstandings regarding the condition or suitability of the item. Viewings and inspections are possible at any time by appointment and are expressly encouraged!!! Images are similar and may show accessories subject to an extra charge. All internal dimensions are approximate. TRADE-INS POSSIBLE FOR ALMOST EVERYTHING!!! Hedpfx Agshlr Rdo Iofg PART-EXCHANGE AND ADDITIONAL PAYMENT POSSIBLE!!! Showground: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday–Friday 8:30 am to 5:00 pm, Saturday 8:30 am to 2:00 pm Always over 500 new and used trailers in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Stanje: novo, največja dovoljena obremenitev: 37.581 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 15.850 mm, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, Factory-new Kässbohrer Mega Tele HD platform semi-trailer with wheel recesses TECHNICAL INFORMATION: - Fifth wheel height: 950 mm - Overall length: 13,535 mm - Gooseneck length: 4,285 mm - Platform length: 8,950 mm - Extension: 6,900 mm - Extension locking position: 500 mm - Gooseneck height: 120 mm - Platform height (loaded): 1,040 mm - Wheelbase: 7,700 mm - Axle load: 10 tonnes - Overall width: 2,550 mm - Gross vehicle weight rating (80 km/h): 48,000 kg - Gross vehicle weight rating (60 km/h): 50,000 kg - Unladen weight: 10,419 kg Hjdpfotn Hlmjx Ag Isfg RUNNING GEAR: - BPW axles with air suspension and drum brakes - 2 rigid front axles, 1 self-steering rear axle - Air suspension incl. load gauge - Wabco braking system - Tyres: 12 x 245/70 R17.5 CHASSIS: - Chassis made of high-quality, high-strength S700 MC steel - 30 mm thick hardwood floor - 9x2 side extensions extendable up to 300 mm - Telescopic rear support winder, 50-ton capacity - Mechanically folding supports at rear, 45-ton capacity - Wheel recesses: 420 mm deep, 800 mm wide; suitable for tyre diameter up to 1,800 mm RAMPS: - Ramp mounts at the rear of the vehicle LOAD SECURING: - Lashing rings - Stake pockets - Stakes - Container locks suitable for 1x20 ft, 1x40 ft, or 1x45 ft + 4 twist locks - Front wall made of steel, height 1,500 mm, with Code-XL certificate ACCESSORIES: - 1x plastic toolbox - Stake box for 18 stakes - 1x beacon - Wheel recess bridge to close the wheel recesses - Ramp box Chassis colour: Nova grey For further information, please feel free to contact us.

Stanje: novo, največja dovoljena obremenitev: 36.565 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.550 mm, skupna širina: 2.550 mm, skupna višina: 1.040 mm, Leto izdelave: 2025, Oprema: ABS, Brand-new Kässbohrer SPS Mega Heavy-Duty Platform Semi-Trailer – Immediately Available! Technical Data: * Fifth-wheel height: 950 mm * Platform length: 13,550 mm * Gooseneck: 120 mm * Platform height: 1,040 mm * Wheelbase: 7,700 mm * Axle spacing: 1,360 mm Hfjdpfxerukt Re Ag Ijg * Overall width: 2,550 mm * Gross vehicle weight rating [80 km/h]: 45,000 kg * Gross vehicle weight rating [60 km/h]: 46,000 kg * Unladen weight: 7,827 kg Chassis: * BPW axles with air suspension and disc brakes * Air suspension with load gauge * 1st axle liftable * Wabco braking system * Tyres: 445/45 R 19.5 Frame: * Chassis manufactured from high-grade S700 MC steel, compliant with ISO 1726 * 30 mm hardwood floor with 2 mm Omega-profile reinforcement * 8x2 units of side extensions, adjustable up to 300 mm * Landing gear at the front, foldable supports at the rear Ramp: * Ramp mounts at the rear of the vehicle * Rear ramp storage box Load securing: * Lashing rings * Stake pockets * 6 x 2 pcs. container lock pockets (suitable for 1x20 ft, 2x20 ft, 1x40 ft containers) + 2 x 2 pcs. container locks * Steel front wall, 1,500 mm high, with Code XL certificate Accessories: * 1x stainless steel toolbox * Stake storage box Chassis colour: RAL 3020 Traffic Red For further information, please do not hesitate to contact us.

Stanje: novo, največja dovoljena obremenitev: 37.581 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 15.850 mm, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, Brand new Kässbohrer Mega Tele HD platform semi-trailer with wheel recesses TECHNICAL INFORMATION: - Fifth wheel height: 950 mm - Overall length: 13,535 mm - Gooseneck length: 4,285 mm - Platform length: 8,950 mm - Extension: 6,900 mm - Locking position for extension: 500 mm - Gooseneck height: 120 mm - Platform height (loaded): 1,040 mm - Wheelbase: 7,700 mm - Axle load: 10 tons - Total width: 2,550 mm - Technical gross weight (80 km/h): 48,000 kg - Technical gross weight (60 km/h): 50,000 kg - Unladen weight: 10,419 kg RUNNING GEAR: - BPW axles with air suspension and drum brakes - 2x fixed axles at the front, 1x trailing steering axle at the rear - Air suspension with load gauge - Wabco braking system - Tyres: 12 units, size 245/70 R17.5 CHASSIS: - Chassis made of high-quality, high-strength S700 MC steel - 30 mm thick hardwood floor - 9x2 side extensions, extendable up to 300 mm - Telescopic rear stabilizer with 50 ton capacity - Rear mechanical folding supports with 45 ton capacity - Wheel recesses dimensions: 420 mm deep, 800 mm wide - Suitable for tyre diameter up to 1,800 mm RAMP: - Ramp receptacles at the rear of the vehicle Hfodpjmtwypsfx Ag Ijg LOAD SECURING: - Lashing rings - Stake pockets - Stakes - Container locks suitable for 1x20 ft, 1x40 ft, or 1x45 ft + 4 twist locks - Front wall made of steel, height 1,500 mm, Code XL certified ACCESSORIES: - 1x plastic toolbox - Stake box with capacity for 18 stakes - 1x rotating beacon - Wheel recess bridge for closing the recesses Chassis colour: RAL 3020 Traffic Red For further information, we are happy to assist you.

Stanje: rabljeno, največja dovoljena obremenitev: 31.000 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2024, dolžina tovornega prostora: 9.290 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 950 mm, * PT 40.0 Profile: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with raising/lowering system and RtR valve * Manometer pressure display for load weight determination (axles separated into 2 air suspension circuits) * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning panel sets front and rear * Front axle: plastic quarter mudguards with spray protection * Rear axle: straight galvanized steel skirts with spray protection * Reflective contour markings on sides and rear * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12 / 24 V Hfedpfx Agsl Tlhrs Isg * Removable LED beacon at rear * 2 LED reversing lights (activated via reverse gear) * Tow bar with 50 mm towing eye and height adjustment * Tool box made of galvanized steel, black powder coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Extension in front of turntable platform approx. 490 mm long with 45° corners * ROBOTER-welded anti-slip coating on the turntable platform steel plate * Load securing package consisting of: 1 x 13.4 t UVV lashing ring front left & right in front of bulkhead support, 4 mounting holes per side in the turntable platform each with 2 t lashing capacity, 1 pair of 13.4 t lashing rings suspended at rear left & right before the rear cross member, 4 pairs of 10 t UVV lashing rings per side, swiveling and lowerable, loadable in all directions and recessed into side frame, 3 stake pockets per side with 2 t lashing option each * Hot-dip galvanized mechanical folding outriggers for 3 m overall width (not on the rear slope) * Timber plank holder for width extensions under the chassis, longitudinal left * Excavator arm rest above rear axle up to end plate, approx. 2,100 mm long and 190 mm deep, 2 pairs of 6.4 t lashing rings per side in the excavator arm rest * Hardwood flooring on the running surfaces of the low-loader platform * Hydraulically operated single-piece ramps (approx. 3,000 x 720 mm), mechanically adjustable width * Ramp outer planks made of hardwood * Steel construction prepped for 6-way control sliders * Unladen loading height approx. 950 mm +/- 20 mm (chassis) * Turntable, folding outriggers, mechanical support legs, ramps are hot-dip galvanized * -- Axles, air tanks, tow bar painted black -- * Tyres 235/75 R 17.5 * Vehicle registered for one day in 07/2024, due to missing tire pressure monitoring system and was not loaded/used * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 33.000 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2024, naslednji pregled (TÜV): 06/2026, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment. Complete specification upon request. Frame: * Conventional ladder frame in lightweight steel construction with through-bolted cross members * Chassis frame with camber * Cover plate between outer frame and longitudinal member, serving as tire protection for the drive axle of the tractor unit * Fifth wheel plate approx. 8 mm thick with 2-inch kingpin according to DIN 74080 / ISO 337 Running Gear: * Axle lift mechanism on axle 1 * BPW three-axle module ECO Air with disc brakes, approx. Ø 370 mm, ET 120 * Air suspension with approx. 260 mm stroke Hodpfx Agox Tx Efe Iofg Vehicle Tires: * 6x 445/45 R 19.5, 160J tires Chassis attachments: * Mechanical landing legs with compensating foot, approx. 24 t lifting capacity, operation on right side in direction of travel * Side underrun protection, tool-free folding, on right and left in direction of travel * Spare wheel mount with winch, incl. 1 wheel fixing kit, mounted behind axle module * Storage for 16 square tube stakes approx. 80 x 80 x 1,990 mm, mounted to the longitudinal member on left and right in the direction of travel * Waterproof plastic toolbox, internal dimensions approx. 545 x 400 x 400 mm, installed rear left in direction of travel * Rear right access ladder, extendable Brake / Air suspension system: * EBS system 2S/2M with stability control (including ABS/ALB function), EBS plug connection ISO 7638, (without connecting lines) * Parking brake with spring accumulator, external pneumatic connectors, as well as external EBS diagnostic connector via ISO 7638 plug * WABCO EBS system * Air suspension system incl. 1 raise/lower valve, mounted in direction of travel left behind axle module. Ride height is self-adjusting * 2 confusion-proof coupling heads front ISO 1728 * Air reservoir for brake system and air supply in steel (EN 286-2) Floor: * Board floor approx. 30 mm thick, multiple-bonded plywood * Rear floor jointed * Stake pockets for square tube stakes approx. 80 x 80 mm, arrangement according to drawing J9: 8 stake pocket rails (18 stake pockets per rail, 4 outer + 10 center per rail) Front wall: * Front wall approx. 2,000 mm high with steel volume corner posts, profiled steel sheet, bolted/riveted to frame, 2 pairs of lashing points (permissible lashing force approx. 1,000 kg per ring) on bulkhead according to EN 12640. Note: When using the front wall for load securing, suitable lashing straps must be used if the vehicle is operated without sideboards and rear drop / tailgate! * Sidewall VarioFix steel lashing outer frame without stake storage * 24 pairs of lashing rings in the outer frame (according to EN 12640), allowable drawbar pull approx. 5,000 kg per ring Electrics / Electronics: * Lamp bracket made of steel, positioned above underrun protector * KÖGEL LUXIMA Premium package, consisting of: LED license plate light, LED marker lights and front reflectors, flashing LED side marker lights, Superseal and bayonet connectors on the lights * 2 outline marker lights with arm, attached to multiple-chamber tail light * 2 multiple-chamber tail lights * Fixed adapter box with 2x 7-pin sockets (1 x ISO 1185 / 1 x ISO 3731, 24 V-N / 24 V-S) and 15-pin socket ISO 12098 * Compact LED rotating beacon, orange, with mounting tube, positioned on lamp carrier. Switch located in the lamp

Stanje: rabljeno, skupna masa: 23.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2019, naslednji pregled (TÜV): 10/2026, dolžina tovornega prostora: 7.014 mm, širina tovornega prostora: 2.240 mm, višina nakladalnega prostora: 579 mm, Oprema: ABS, * SAF osi Hfedpfoxiur Dsx Ag Isg * Škatla za shranjevanje * Ploščad * Stranice (600 mm) * Lastna masa: 4.800 kg * Tehnični pregled (HU): 10.2026 * Periodični pregled (SP): 04.2026 -----Interna številka vozila: 11330----Pridržujemo si pravico do napak in vmesne prodaje WhatsApp podpora na voljo! Za vprašanja o vozilu ali dodatne informacije nam pišite prek WhatsAppa Whatsapp Whatsapp