Müller-Mitteltal Etue-Ta-R 11,9 Tandem Tieflader nakup rabljenega (56.438)

Stanje: novo, največja dovoljena obremenitev: 8.900 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-ER 14.4 Flatbed: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: Blsdpfxsy U A Efs Ahmsk * Air suspension with lift and lowering system ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in dimension B: approx. 8,080 mm) * 40 mm flange towing eye ---- Electrics / Lighting: * 15-pin power connector * LED lighting system, 12 / 24 V * 2 additional LED reversing lights at the rear (controlled via reverse gear) * 1 removable LED beacon (incl. holder) at the rear * Tire pressure monitoring system (TPMS) ----General Fittings: * Mechanically adjustable 3-metre warning panel sets, front and rear * Support winch (front) * External foldable support legs (rear) * Plastic toolboxes approx. 750 x 350 x 300 mm, mounted left and right * Side underrun protection * Rear underrun protection * Quarter mudguards (plastic) ----Loading Platform: * 400 mm high bolted front wall * 50 mm softwood flooring * 2 pairs of container locks (extendable to 3 m container external width), lockable – locked to ISO - DIN 15190 = 2,259 mm, extended = 2,819 mm (this measure is not to DIN), for an absolute external width of 3,000 mm ----Load Securing: * Perforated outer frame, approx. 45° angled with 2 t lashing capacity every 480 mm * Installation possible for 3 t drop lashing rings every 600 mm. (5 x 3 t UVV-certified lashing rings per side) * In the front and rear corners, 1 x 6.3 t lashing ring each (front directly behind the container locks in the wooden floor, rear in the end crossmember) * Various drilling holes for 1.2 t lashing points in the front wall and rear crossmember ----Ramps: * 1 pair of aluminium slide-in ramps, approx. 3,310 x 410 mm (load capacity 8 t/pair) – suitable for rubber-tyred and tracked vehicles * Storage compartment at the rear, recessed under the loading platform in the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun protection, and rear supports hot-dip galvanized--- * Axles, air tanks, front support winch and flange towing eye painted black ----Further Information: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Sample images ----Delivery Time: * Available from approx. calendar week 38/2026

Stanje: novo, največja dovoljena obremenitev: 23.940 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profi 30.0 ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Parabolic springs with mechanical rear axle compensation ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment via drawbar spring & turnbuckle ----Lighting / Electrics: * TPMS Tire Pressure Monitoring System * Multi-voltage system * LED tail lights 12 / 24 V * Rear removable warning beacon * 15-pin power connector ----General Equipment: * Side underrun protection * Rear swing-down support legs on chassis frame * Mechanically adjustable warning panel kits front and rear * VA closed plastic mudguards in front and straight galvanized steel skirts at the rear, each with spray protection * Tool box made of galvanized steel sheet - black powder-coated - approx. 650 x 300 x 600 mm * Folding lid (hot-dip galvanized) for the toolbox in the turntable platform * Four stake pockets per side (stakes not included), also with lashing function ----Load Securing (La-Si package consisting of): * 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform * 6 pairs of UVV folding and retractable lashing rings, loadable in all directions and countersunk into the outer frame * 13.4 t at corners, 10 t otherwise ----Widening: * 6 pairs of manual folding outrigger arms for 3 m overall width (not on the sloped rear section) Bjdpfx Aol Th Nnjhmslk * Widening boards stowed in the center of the loading area ----Ramps: * Hot-dip galvanized one-piece hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-way hydraulic control unit pre-installed for optional hydraulic side shift of ramps ----Loading Area: * Over turntable: approx. 1,960 x 2,520 mm & unladen height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unladen height approx. 910 mm (incl. 860 mm entry incline) ----Tyres: * 235/75 R 17.5 twin tyres ----Unladen weight: * Approx. 5,980 kg unladen weight ----Finish: * Chassis, turntable, drawbar and loading ramps hot-dip galvanized * Axles, springs, air tanks etc. painted black ----Information: * Permissible total weight of 30,000 kg technically possible * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Immediately available ex stock Egestorf

Stanje: rabljeno, konfiguracija osi: 2 osi, prva registracija: 09/1993, Leto izdelave: 1993, Oprema: ABS, = Additional options and equipment = Bjdpfx Asxt Rw Rshmolk - Electronic braking system (EBS) = Notes = Müller-Mitteltal low-bed trailer 2-axle low-loader ZSA Drive-on ramps IDNR 892 Transaction handling We look forward to advising you, signing contracts, or handing over the vehicle at our dealership. Please schedule an appointment. If you are unable to come to our dealership, we offer complete processing via telephone, email, WhatsApp, or fax. Upon request, we can deliver your new vehicle directly to your door. This provides you with the best price as well as maximum security and convenience during the transaction. We are happy to accept your used vehicle as a trade-in. We also offer the possibility of a digital vehicle appraisal using your vehicle pictures without the need to visit our dealership. Our specialized purchase team offers you a guaranteed top price. Upon request, we will deliver your new 'used' vehicle anywhere in Germany directly to your doorstep and collect your trade-in accordingly. Financing - Leasing Immediate approval and clearing of existing credit Your specialized partner for passenger cars, vans, commercial vehicles, and construction machinery ITC GmbH & Co KG Siemensstraße 7 32312 Lübbecke (industrial area) Over 400 vehicles in stock at all times All details provided in advertisements, on the internet, price tags, and images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability or warranty for typographical or data transmission errors. Listed features may need to be checked separately by the buyer. The offer is generally without new TÜV inspection; we are happy to provide you an offer for this through our partner workshop. Subject to errors and prior sale. = Further information = Unladen weight: 4,600 kg Payload: 13,400 kg Gross vehicle weight: 18,000 kg Sales price: € 6,500, US$ 7,571

Stanje: rabljeno, največja dovoljena obremenitev: 10.870 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 06/2025, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2023, Oprema: ABS, KA-TA-R 14.4: ----Brakes: * Wabco ABS * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Eye: * Height-adjustable drawbar (300 mm) with 40 mm flange towing eye ----Electrics / Lighting: * 15-pin power connector * Multi-chamber tail lights ----General Attachments: * Jost mechanical landing gear at front * 2 mechanical folding supports at rear * Plastic toolbox, approx. 650 x 350 x 320 mm, mounted on the right side of the chassis at the front * Bolted underrun protection * Plastic quarter mudguards * Net hooks positioned at the central locking locations and 2 on the front wall ----Chassis: * High-tensile steel chassis ----Tipping Platform: * Steel pallet-type three-way tipper body with continuous side walls, upper inside pipe reinforcement, no central stanchions; drop-down with drop side spring assistance * Bolt-on rear stanchions * Combination steel swing doors on the rear wall, 2-leaf, asymmetrically split, can swing and lock 270°, not drop-down, with additional pendulum frame for automatic rear wall opening during tipping; locking via galvanized rotary bolt at the rear and central locking; deactivation for auto rear wall function when tipping backwards with door open * 4 mm fine-grained steel floor plate * Rear mounting rails for loading ramps ----Load Securing: * 1 x 5 t lashing point in each corner, plus 4 x 3 t lashing rings on each side recessed into the external frame ----Ramps: * 1 pair of aluminium drive-on ramps, approx. 3,570 x 410 mm (load capacity: 10 t/pair), suitable for rubber-tired & tracked vehicles * Lockable storage compartment under the loading platform, integrated into the chassis for the ramps ----Tyres: * Tyres 285/70 R19.5 ----Painting: * Chassis, drawbar, underrun protection, rear stanchions and rear folding supports hot-dip galvanized * Axles, springs, air tanks and support winch painted black * Drop sides painted RAL 9010 pure white * Other RAL-coloured side wall painting available at extra cost ----Information: * Reinforced body with load securing certificate * Vehicle has a day registration (not previously in use) * Subject to errors and prior sale ----Delivery time: Bedpfol Th Htsx Ahmslk * Available immediately ex Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 10.870 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 06/2025, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2023, Oprema: ABS, KA-TA-R 14.4: ----Brakes: * Wabco ABS * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer set ----Drawbar / Flange eye: * Height-adjustable drawbar (300 mm adjustment range) with 40 mm flange eye ----Electrics / Lighting: * 15-pin power connector * Multi-chamber tail lights ----General attachments: * Jost mechanical landing gear in front * Two mechanical folding supports at the rear * Plastic toolbox approx. 650 x 350 x 320 mm mounted on the right side at the front of the chassis * Bolt-on underrun protection * Plastic quarter mudguards * Net hooks located at the central locking mounting points as well as 2 hooks on the front wall ----Chassis: * Chassis fabricated from fine-grain steel ----Tipper body: * Steel pallet three-way tipper body with continuous side walls, upper sections internally reinforced with pipe, no central stanchions, drop-side design with tailgate spring lifters * Rear stanchions bolted * Combination steel wing doors at the rear, double-leaf, asymmetrically divided, can swing open and lock to 270°, not collapsible, fitted with additional pendulum frame for automatic tailgate opening during tipping operation; locking by galvanized rotary bar at the rear and central locking; deactivation for automatic tailgate function when tipping backward with open wing doors * 4 mm fine-grain steel floor plate * Rear mounting rails for loading ramps ----Load securing: * Each corner fitted with one 5 t lashing ring, each side fitted with four 3 t recessed lashing rings in the outer frame ----Ramps: * One pair of aluminum access ramps approx. 3,570 x 410 mm (load capacity 10 t/pair) suitable for rubber-tired & tracked vehicles * Rear lockable storage compartment for ramps integrated underneath the load area in the chassis ----Tyres: * Tyres 285/70 19.5 ----Paintwork: * Chassis, drawbar, underrun protection, rear stanchion, and rear support legs hot-dip galvanized Blodpfjl Th Dusx Ahmek * Axles, springs, air reservoirs, and landing gear painted in a shade of black * Side wall paintwork in RAL 9010 pure white * Other RAL color tones for side walls available at extra cost ----Additional Information: * Reinforced body with load securing certificate * Vehicle comes with one-day registration (never used) * Subject to errors and prior sale ----Delivery time: Immediately available ex Egestorf

Stanje: rabljeno, konfiguracija osi: 1 os, prva registracija: 08/1993, Leto izdelave: 1993, Oprema: ABS, = Further Options and Equipment = - Electronic Braking System (EBS) = Notes = Müller-Mitteltal KA-TA Tipping Trailer Single axle Air suspension ABS Tyres 60% Processing We look forward to welcoming you for a consultation, contract signing, or vehicle collection at our dealership. Please schedule an appointment. If you are unable to visit us in person, we offer complete processing via phone, e-mail, WhatsApp, or fax. On request, we can deliver your new vehicle directly to your door. This means you benefit from the best price, maximum security, and convenience during your transaction. We are also happy to take your used vehicle in part exchange. We offer a digital vehicle appraisal based on your photos, even without you visiting our dealership. Our dedicated purchasing team guarantees you the highest price. Upon request, we can deliver your new 'used' vehicle nationwide, directly to your doorstep, and collect your trade-in vehicle. Financing - Leasing Immediate approval and old loan settlement Your specialist partner for passenger cars, transporters, commercial vehicles, and construction machinery ITC GmbH & Co KG Siemensstraße 7 32312 Lübbecke (Industrial estate) Over 400 vehicles in stock at all times Bsdpfxoxt Sl No Ahmolk The information provided in advertisements, on the internet, on price tags and in images are non-binding descriptions and do not constitute guaranteed characteristics. The seller accepts no liability or warranty for typographical and data transmission errors. Listed equipment should be checked separately if necessary. The offer is generally without a new MOT; we are happy to provide a quote for an inspection at our partner workshop. Subject to errors and prior sale. = Further Information = Unladen weight: 3,700 kg Payload: 9,300 kg gross vehicle weight: 13,000 kg

Stanje: novo, lastna masa: 3.600 kg, največja dovoljena obremenitev: 8.300 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.480 mm, vzmetenje: zrak, velikost pnevmatike: 205/65 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 205/65 R 17,5, velikost zadnje pnevmatike: 205/65 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Vlečna cev izvlečna do cca 3.850 mm, zaklep pri cca 1.000 mm, 2.000 mm, 3.000 mm ali 3.850 mm, nakladalna višina pod obremenitvijo cca 800 mm, notranja širina vozila cca 2.530 mm, na sredini 4 x žep za vstavne količke 100 x 50, 8 x žep na zunanjem okviru, 4 x pritrdilne zanke po 5,3 t, zunanji okvir z pritrdilnimi očesi, 4 x opozorilne table z osvetlitvijo, snemljiva okoliška luč zadaj, označevanje obrisa in bočna zaščita pred trkom, zadnje blatnike in preprečevanje razprševanja, -- pridržujemo si pravico do tiskarskih napak, sprememb, slike so simbolične --, Več podatkov pod: !, More Details: ! Bljdpfxozn Nz Rs Ahmok

Stanje: novo, lastna masa: 3.600 kg, največja dovoljena obremenitev: 8.300 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.480 mm, vzmetenje: drugo, velikost pnevmatike: 205/65 R 17,5, medosna razdalja: 990 mm, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 205/65 R 17,5, velikost zadnje pnevmatike: 205/65 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Vlečno drogo izvlečno do pribl. 3.850 mm, zaklep pri pribl. 1.000 mm, 2.000 mm, 3.000 mm ali 3.850 mm, višina nakladanja obremenjeno pribl. 830 mm, notranja širina vozila pribl. 2.530 mm, na sredini 4 žepki za vložne stebričke 100 x 50, 8 žepkov za stebričke v zunanjem okviru, 4 pritrdilne zanke po 5,3 t, zunanji okvir z zankami za privezovanje, 4 opozorilne table z osvetlitvijo, zadnja opozorilna rotacijska luč, snemljiva, označba obrisa in bočna zaščita, zadnji blatniki in preprečevanje pršenja vode, -- tiskarske napake, napake in spremembe pridržane, vzorčne slike --, Več podatkov pod: !, More Details: ! Bodpfx Ajzn Nv Uehmolk

Stanje: rabljeno, največja dovoljena obremenitev: 12.750 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2015, dolžina tovornega prostora: 6.800 mm, širina tovornega prostora: 2.460 mm, višina nakladalnega prostora: 400 mm, prostornina tovornega prostora: 6 m³, Oprema: ABS, * ABS * Sprednji stabilizator * Zadnji oporni sistem * Zadnje luči s 5 žarilnicami * Okrogla opozorilna luč, oranžne barve * Zračna priključna povezava Duomatik * Osne konstrukcije BPW ECO-Plus ----Nadgradnja: Nizkopodna prikolica, višina nakladalnega prostora približno 870 mm, zadnji del poševno oblikovan, višina nagiba približno 720 mm, visoka čelna stena, dvodelne stranske stene na levi in desni strani, zložljiva osrednja stena, zapirala Kinnegrip, lesena podlaga (protizdrsna obloga na zadnji strani), pritrdilne zanke in obroči, 1 par izvlečnih zaklepnih naprav za kontejnerje (Twist-Lock) na sprednji strani, hidravlične dvižne rampe. Podvozje vozila, priklopna naprava in rampe so pocinkane. Bodszl Ikfepfx Ahmslk Prodaja samo podjetjem. PRI IZVOZU SE PLAČA SAMO NETO CENA!!!!! VSE PODATKE NAVAJAMO BREZ GARANCIJE. OPREMA + DODATNA OPREMA. Osnova za vsa pogodbena razmerja, račune, predračune, naročila in pogovore o prodaji so naši splošni pogoji (glejte tudi pravno obvestilo).

Stanje: novo, vzmetenje: drugo, barva: drugo, vrsta prenosa: drugo, voznikova kabina: drugo, emisijski razred: noben, Equalizer block for low-bed semi-trailers incl. container locks. Price per equalizer block. -- Subject to typographical errors, mistakes, and changes. Sample images --. More data at: !, More Details: ! Blodpfx Ahszqtvwsmjk

Stanje: novo, vzmetenje: drugo, barva: drugo, vrsta prenosa: drugo, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Storage compartment for aluminium ramps, price per compartment, length approx. 2.48 m, width approx. 1 m, height approx. 27 cm, -- printing errors, mistakes and changes reserved, sample images --, For more data see: !, More details: ! Bledozn Nwrjpfx Ahmok

Stanje: rabljeno, največja dovoljena obremenitev: 22.000 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2008, Oprema: ABS, Vehicle identification number: WMM0000080052540 STRAIGHT LOADING PLATFORM Container locking device Unladen weight: 8,000 kg German roadworthiness test (HU): due Gigant axles with drum brakes Air suspension Platform dimensions: 9,400 mm – Loading height: 880 mm – For further measurements see image No. 4 Extendable to 3,000 mm with lighting Drawbar – 50 mm Hydraulic ramps, split – Length: 2,600 + 1,600 mm – Width: 650 mm Bjdpfstuhv Rex Ahmslk Support legs Tyres: 235/75 R 17.5 Subject to prior sale, modifications, and errors. This description serves for general identification of the vehicle only and does not constitute a warranty in the legal sense. The details specified in the sales contract are binding. Our offer generally does not include a new roadworthiness test (TÜV). If a new inspection is required, we will be happy to provide an offer from our partner workshops. Vehicle may feature advertising decals and/or inscriptions. Our general terms and conditions of delivery and payment apply.

Stanje: rabljeno, skupna masa: 13.500 kg, konfiguracija osi: 2 osi, prva registracija: 02/2018, dolžina tovornega prostora: 5.060 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2018, MUELLER MITTELTAL Prikolica (SAMONOSILNA) 5,06 m Uvožena / BREZ POŠKODB PO NESREČI V ODLIČNEM STANJU! LETNIK PROIZVODNJE: 2018 VZMETENA OSPREDLJENA OS VELIKOST PNEVMATIK: 385/55R19,5 MEDOSNA RAZDALJA: 115 PLATFORMA: 506 x 242 x 50 m SKUPNA TEŽA: 13.500 kg NOSILNOST: 10.000 kg TEL: KUBA – POLJSKI, ANGLEŠKI, NEMŠKI, ITALIJANSKI SEBASTIAN – POLJSKI, NEMŠKI, ITALIJANSKI, ????? LASZLO – MADŽARSKI COSTEL – ROMUNSKI Bljdpfoy E Ecnex Ahmsk (Za izvoz uredimo vse potrebne formalnosti, vključno s številkami) RADEK – ?????

Stanje: novo, največja dovoljena obremenitev: 6.870 kg, skupna masa: 9.900 kg, konfiguracija osi: 1 os, Leto izdelave: 2026, * KWH 9.9 ML: ----Brakes: * EBS braking system * Drum brakes * Emergency release device for spring-loaded cylinders ----Axle: * BPW axle ----Suspension: * Parabolic springs ----Drawbar / Coupling Eye: * Drawbar with 40 mm bolted towing eye (height-adjustable) ----Electrics / Lighting: * 15-pin power connector * LED lighting * Flashing LED side marker lights * RDÜ tire pressure monitoring system ----General Attachments: Blodpfxsu I Iqxs Ahmjk * Support winch at the front * Spring-assisted square tube supports at the rear with base plate, safety lock pin for various support heights * Enclosed steel mudguards with spray protection * Enclosed side underrun protection usable as advertising panel * Plastic toolbox with floor insert (installed horizontally), approx. 500 x 350 x 400 mm ----Body: * Swiveling cable drum body, clear width between drum arms 1,700 mm, with tension lock for securing drums at the support arm ends, as well as a central claw lock to secure the cable drum body to the chassis * Motor-hydraulic drum drive with hydraulic motor * Valves and adjustable, rubber-coated drive rollers * Hydraulic speed regulator and brake for drum drive * Steel drum shaft with 76 mm diameter including centering and rotating ends * 1 pair of polyamide centering cones, stepwise offset ----Chassis: * Chassis made of torsion-resistant square tubes and cross beams ----Pump Unit: * Hydraulic pump unit with diesel engine * Fuel tank and hand starter * 6.5 HP with gear pump (150 bar) ----Tires: * 315/80 R 22.5 ----Unladen Weight: * 2,690 kg unladen weight ----Paintwork: * Vehicle hot-dip galvanized ----Information: * New vehicle with full manufacturer's warranty * Errors and prior sale reserved ----Delivery Time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 6.870 kg, skupna masa: 8.800 kg, konfiguracija osi: 1 os, Leto izdelave: 2026, * KWH 9.9 ML: ----Brakes: * EBS brake system * Drum brakes * Emergency release device for spring-loaded cylinders ----Axle: * BPW axle ----Suspension: * Parabolic springs ----Drawbar / Flange eye: * Drawbar with 40 mm screwed towing eye (height adjustable mm) ----Electrics / Lighting: * 15-pin power connector * LED lighting * Flashing LED side marker lights * RDÜ tire pressure monitoring ----General attachments: * Support winch at the front * Spring-assisted square tube supports at the rear with base plate; safety locking pins for various support heights * Closed steel sheet mudguards with splash protection * Closed side underrun protection, can be used as advertising space * Plastic toolbox with floor insert (installed horizontally), approx. 500 x 350 x 400 mm ----Superstructure: Bledju I Iqlepfx Ahmok * Pivoting cable drum superstructure, clear width between drum arms 1,700 mm, with tension locks for securing the drum at the ends of the support arms, and central claw locking device securing the drum superstructure to the chassis * Motor-hydraulic drum drive with oil motor * Valves and movable, rubber-covered drive rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft, 76 mm diameter, with centering and rotating ends * 1 pair of stepwise offset centering cones made of polyamide ----Chassis: * Chassis made of torsion-resistant square tubes and cross members ----Pump unit: * Hydraulic pump unit with diesel engine * Fuel tank and hand starter * 6.5 HP with gear pump (150 bar) ----Tires: * 315/80 R 22.5 ----Unladen weight: * 2,690 kg unladen weight ----Paintwork: * Vehicle is hot-dip galvanized ----Information: * New vehicle with full manufacturer warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 6.870 kg, skupna masa: 9.900 kg, konfiguracija osi: 1 os, Leto izdelave: 2026, * KWH 9.9 ML: ----Brake System: * EBS braking system * Drum brakes * Emergency release device for spring brake cylinders Bedpfou I Iq Ejx Ahmslk ----Axle: * BPW axle ----Suspension: * Parabolic springs ----Drawbar / Flange Eye: * Drawbar with 40 mm bolted towing eye (height-adjustable mm) ----Electrics / Lighting: * 15-pin power connector * LED lighting * Flashing LED side marker lights * RDÜ tire pressure monitoring system ----General Attachments: * Support winch at the front * Spring-assisted square tube supports at the rear with base plate. Safety locking pins for various support heights * Closed steel mudguards with spray protection * Closed side underrun protection, can be used as advertising space * Plastic toolbox with floor inlay (horizontal installation), approx. 500 x 350 x 400 mm ----Superstructure: * Swiveling cable drum superstructure, clear width between drum arms 1,700 mm, with tension lock on the drum arm ends, plus central claw lock securing the cable drum superstructure to the chassis * Motor-driven hydraulic cable drum drive with oil motor * Valves and movable, rubber-coated drive rollers * Hydraulic speed regulator and brake for the drum drive * Steel drum shaft, 76 mm diameter, with centering and rotating ends * 1 pair of polyamide centering cones, stepped ----Chassis: * Chassis made from torsion-resistant square tubing and cross beams ----Pump Unit: * Hydraulic pump unit with diesel engine * Fuel tank and hand starter * 6.5 HP with gear pump (150 bar) ----Tyres: * 315/80 R 22.5 ----Unladen Weight: * 2,690 kg unladen weight ----Paintwork: * Vehicle is hot-dip galvanized ----Notes: * New vehicle with full manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf

Stanje: novo, največja dovoljena obremenitev: 6.900 kg, skupna masa: 9.900 kg, konfiguracija osi: 1 os, Leto izdelave: 2026, * KWH 9.9 ML: ----Brakes: * EBS braking system * Drum brakes ----Axle: * BPW axle ----Suspension: * Parabolic springs ----Electrical / Lighting: * RDÜ tire pressure monitoring system * 15-pin power connector * LED lighting * Flashing LED side marker lights Bljdpfxexyniwj Ahmok ----Drawbar / Flanged towing eye: * Drawbar with 40 mm bolt-on towing eye (height adjustable in mm) ----General attachments: * Support winch at front * Spring-assisted square tube supports at rear with base plate, safety lock pins for various support heights * Enclosed steel fenders with splash guards * Enclosed side underrun protection, can be used as advertising space * Plastic toolbox with floor insert (horizontal installation), approx. 500 x 350 x 400 mm ----Superstructure: * Swiveling cable drum superstructure, clear width between drum arms 1,700 mm, with tension lock for drum securing at the ends of the support arms, as well as latching of the cable drum superstructure to the chassis via a centrally located claw lock * Motor-driven hydraulic drum drive with oil motor * Valves and adjustable, rubber-coated drive rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft with 76 mm diameter, centering and rotatable ends * 1 pair of centering cones made of polyamide, stepwise offset * Preparation of steel construction and hydraulics for retrofitting an auxiliary engine ----Chassis: * Chassis made of torsion-resistant square sections and cross-members ----Hydraulics: * Hydraulic lines for supply and return ----Tyres: * 315/80 R 22.5 tires ----Painting: * Vehicle is hot-dip galvanized ----Info: * 2,690 kg curb weight * New vehicle with full manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 29.850 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 8.000 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, TS 2 ML ----Brakes: * EBS-E (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Last axle is a trailing steering axle with electro-pneumatic steering lock, activated by PIN in reverse gear * Additional lock for the trailing axle operated from the tractor unit for shunting purposes – no installation necessary on the truck side – assigned to PIN 10; the lock must be deactivated before driving on public roads ----Suspension: * Air suspension with raise and lower function and Ride-on-Road (RtR) feature ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck's display via EBS signal – no truck-side installation required * LED tail lights 12 / 24 V * Flashing side marker lights * LED reversing lights activated via reverse gear * SmartBoard installed as an info tool with pressure sensors exclusively for total axle load display * 7-pin socket at the rear for extended-length lighting * LED beacon (removable) at the rear ----General Attachments: * Aluminum air tanks * Mechanical crank landing legs * Galvanised sheet steel mudguards * Swivel arm as carrier for connecting lines in front of the front panel ----Warning Package: * Mechanically adjustable warning sign package ----Low Loader Platform: * 50 mm floor covering made from larch / Douglas fir instead of spruce / fir * Rear bevel – 700 mm long – on the semi-trailer platform to the low-bed section with checker plate covering, and at the end a perforated strip for attaching aluminum approach ramps * Tread plate covers over the wheels * SP combo package: toolbox with 45° corners made from galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, located on the semi-trailer platform approx. 2,480 x 500 mm * Folding lid on top as well as side doors in the angled corners * Foldable aluminum side boards 500 mm high on the semi-trailer platform, including foldable and removable rear stanchions * Inserted aluminum rear wall, 150 mm high * Second kingpin position * Preparation for container locking * Preparation for 3 recesses in the approach bevel from the low-bed to the gooseneck * Preparation for retrofitting folding outriggers for 3 m widening by welding the mounting brackets into the outer frame ----Load Securing: Semi-trailer platform: * In the front corners and front, 50 mm drilled holes for 1.2 t lashing force per hole * 2 x 16.5 t lashing rings recessed in the floor on the sides towards the approach slope Bodpfx Aoykx I Hjhmolk * Perforated outer frame, 45° folded with hole pattern for lashing points (2 t lashing points every 480 mm) * On each side, 2 x 6.3 t retractable lashing rings recessed in the outer frame Low-bed platform: * 2 x 16.5 t lashing rings centrally positioned directly in front of the approach ramp to the gooseneck and recessed * On each side, 3 pairs of 13.5 t lashing rings and 5 pairs of 10 t lashing rings recessed in the outer frame * On each side, 4 stake pockets recessed in the outer frame * Profifix lashing rail in the center along the longitudinal axis (lashing capacity 3 t per lashing circuit) ----Excavator Arm Rest: * From the end of the last rigid axle to the rear crossmember, W = 770 mm, D = 270 mm (on each side, 2 x 6.4 t lashing rings solid welded in the excavator arm rest) ----Ramp: * Hydraulic one-piece "ALLTEC" aluminum approach ramps, approx. 3,200 x 750 mm * Load capacity 13 t per ramp (load capacity 26 t/pair) * Hydraulic ramp

Stanje: novo, največja dovoljena obremenitev: 29.850 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 8.000 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, TS 2 ML ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Rear axle as trailing steering axle with electro-pneumatic steering lock via reverse gear PIN * Additional trailing axle lock, operable from the cab for maneuvering purposes – no truck-side installation required – assigned to PIN 10; lock must be disengaged before driving on public roads ----Suspension: * Air suspension with lift and lowering function as well as RtR function ----Electrics / Lighting: * Tire pressure monitoring system with display option in truck instrument cluster via EBS signal – no truck-side installation required * LED rear lights 12 / 24 V * Flashing side marker lights * LED reverse lights, activated via reverse gear * SmartBoard mounted as an infotool with pressure sensors exclusively for total axle load indication * 7-pin socket at the rear for overlength lighting * Removable LED beacon at the rear ----General Attachments: * Aluminum air tanks * Mechanical crank landing gears * Galvanized steel mudguards * Swivel arm as a carrier for connection cables in front of the front bulkhead ----Warning System Package: * Mechanically adjustable warning sign package ----Low Loader Platform: * 50 mm flooring made of larch / Douglas fir instead of spruce / fir * Rear inclined section – 700 mm long – on the saddle platform to the low-bed with checker plate surface and at the end a perforated strip for hanging aluminum loading ramps * Tread plate covers above the wheels * SP-Combo Package: Tool box with 45° corners, made of galvanized steel and additionally powder-coated in RAL 9006 white aluminum, on the saddle platform approx. 2,480 x 500 mm * Hinged lid on top and side doors in the slanted corners * Fold-down aluminum side walls, 500 mm high, on the saddle platform, including rear stakes, foldable and removable * Inserted aluminum rear wall, 150 mm high * 2nd kingpin position * Prepared for container locks * Prepared for 3 mounting shafts in the inclined section from the low-bed to the gooseneck * Prepared for retrofitting fold-out supports for 3 m extension by welding in receptacles on the outer frame ----Load Securing: Saddle Platform: * Front corners and forward 50 mm bores for 1.2 t lashing force per hole * 2 x 16.5 t lashing rings recessed in the floor towards the inclined ramp * Perforated outer frame, 45° angled with hole pattern for tie-downs (2 t lashing points every 480 mm) * Each side with 2 x 6.3 t retractable lashing rings recessed in the outer frame Low Loader Platform: * 2 x 16.5 t lashing rings centered directly before the inclined section to the gooseneck, recessed * Each side with 3 pairs 13.5 t and 5 pairs 10 t retractable lashing rings recessed into the outer frame * Each side with 4 stake pockets recessed in the outer frame * Profifix lashing rail centered in the longitudinal axis (lashing capacity 3 t per lashing circuit) ----Excavator Arm Rest: * From end of last rigid axle to end crossmember W = 770 mm, D = 270 mm (each side with 2 x 6.4 t lashing rings permanently welded into the excavator arm rest) ----Ramp: * Hydraulic one-piece “ALLTEC” aluminum ramps approx. 3,200 x 750 mm * Load capacity 13 t per ramp (26 t per set) Bledpfx Ahoykx I Tjmek * Hydraulic ramp shifting on sliding tube for ramp shaft ----Hydraulics: * Hydraulic flow divider in the trailer (for lorry hydraulic pump output exceeding 40 l/min up to max. 250 l/min), climbing strips on t

Stanje: rabljeno, prva registracija: 10/2014, skupna masa: 27.000 kg, lastna masa: 5.100 kg, barva: siv, vrsta prenosa: drugo, emisijski razred: noben, Leto izdelave: 2014, največja dovoljena obremenitev: 21.900 kg, naslednji pregled (TÜV): 03/2027, vzmetenje: jeklo, velikost pnevmatike: 265/70 R19.5, velikost sprednje pnevmatike: 265/70 R19.5, velikost zadnje pnevmatike: 265/70 R19.5, voznikova kabina: drugo, Oprema: ABS, dodatne luči, elektronski program stabilnosti (ESP), meglenke, osvetlitev, registracija tovornjaka, zavorni sistem na stisnjen zrak, šasija, Müller Mitteltal remorque 3 essieux pour conteneurs à benne basculante TM 2 24,0 * Conçue pour 2 conteneurs/bennes de 12 m³ chacun * Timon pneumatique abaissable pour chargement frontal * Point d'arrêt réglable pour la fixation du conteneur * Arrimage manuel avec cliquets * Plancher étanche * Essieux BPW * Suspension à lames * Châssis/cadre galvanisé * Freins à tambour * Plaques d'usure * Phares additionnels * 7 anneaux d'arrimage par côté montés à l'extérieur * Grande caisse à outils * Poids : PTAC - 27 000 kg, Poids à vide - 5 170 kg, Charge utile - 21 830 kg * Véhicule allemand avec papiers allemands !! * 1ère main !! * 1ère mise en circulation : 21.10.2014 * Contrôle technique valable jusqu'à 03/2027 * Contrôle sécurité valable jusqu'à 09/2026 * VIN : WMM00000E0058208 Sous réserve de vente préalable, erreurs et modifications ! Bljdezbbbdepfx Ahmek Les logos d'entreprise ont été supprimés de certaines photos – merci de demander ! Aucune garantie sur le fonctionnement des équipements supplémentaires ! Contact : Christoph Ott Tél. + WhatsApp :

Stanje: novo, največja dovoljena obremenitev: 13.650 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, * RAK 18,0 z zunanjimi valji in funkcijo kipanja nazaj ----Zavore: * Wabco EBS-E (elektronski zavorni sistem) * Zasilni sprostitveni sistem za vzmetno-zavorne cilindre * Bobnaste zavore ----Os: * BPW Eco Plus osi ----Vzmetenje: * Zračno vzmetenje (samodejno spuščanje ob odklopu zavore) ----Vlečna škarja: * Pnevmatsko nastavljiva vlečna škarja dolžine cca 2.100 mm z vlečno ušesko 40 mm in nastavitvijo višine preko vlečne vzmeti in natezne matice ----Splošni priključki: * Plastična orodjarna - cca 858 x 500 x 500 mm - desna stran * Zaprta plastična blatnika spredaj in zadaj * Zaprta stranska zaščita pred naletom * Zadnja podvozna zaščita pritrjena z vijaki * Prostor za shranjevanje mrež za zabojnike iz pocinkanega perforiranega pločevine cca 1.000 x 500 x 500 mm * Zložljiv A-ščit zadaj Bledpfsx Ipbmsx Ahmjk * Zadnji zaščitni odbijač proti naletu ----Elektrika / Osvetlitev: * EBS večnapetostni sistem za vlečna vozila z 12 in 24 V elektriko * 15-polni 24 V električni priključek * LED svetlobni sistem za 12 in 24 V * Dodatna 2 LED vzvratni žarometi * RDÜ nadzorni sistem tlaka v pnevmatikah ----Primerno za dolžino kontejnerjev: * za zabojnike dolžine 6.500 mm do 7.000 mm ----Drsna površina za kontejner / nagibna ploščad: * Vodilo valjev zunaj z ravnim jeklom z razmikom cca 2.180 mm v povezavi s tremi centrirnimi kosi na vsaki strani za vodenje kontejnerja * Za namestitev in zaustavitev kontejnerskih valjev sta na zadnji strani nameščena dva poglobljena z okvirjem nagibne ploščadi povezana ležaja valjev s pnevmatsko varnostjo proti zdrsu v vzdolžni smeri * Zapiranje kontejnerjev na valjih poteka preko v okvir nagibne ploščadi vgrajene in zunaj upravljane pnevmatske prečne zapiralne enote (upravljano z ene strani) * Notranji okvir podvozja z nagibnim glavnim okvirom nazaj - motorno-hidravlični nagibni sistem z eno cevjo * Kot kipanja 42° * Gumijaste blazinice med šasijo in nagibnim okvirjem * Natikanje zabojnika spredaj, podvozje vroče cinkano ----Pnevmatike: * Enostavne pnevmatike 385/55 R 22,5 ----Višina nakladanja: * neobremenjeno cca 1.270 mm ----Barvanje: * Podvozna zaščita in zapiralni deli (brez zaključnega laka) * Vrtljivi nosilec, zračni rezervoarji, osi, obračalni obroč in vlečna škarja barvani v črnem odtenku * Vroče cinkano ----Informacije: * za transport zabojnikov po DIN 30722 del 1 * Novo vozilo brez prve registracije z garancijo proizvajalca * Pridržujemo si pravico do napak in vmesne prodaje ----Dobavni rok: * takoj na voljo iz Egestorfa

Stanje: novo, največja dovoljena obremenitev: 13.650 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, RAK 18,0 zunanji valjčni nosilec s funkcijo kipanja nazaj ----Zavore: * Wabco EBS-E (elektronski zavorni sistem) * Sistem za sprostitev vzmetnih valjev v sili * Bobnaste zavore ----Os: * BPW Eco Plus osi Bjdpfx Ajx Ipa Aohmjlk ----Vzmetenje: * Zračno vzmetenje (samodejno znižanje ob odklopu zavore) ----Vlečna škarja: * Pnevmatsko nastavljiva vlečna škarja dolžine pribl. 2.100 mm s 40 mm vlečno zanko in višinskim nastavljanjem prek vlečne vzmeti in nateznega vijaka ----Splošni priključni deli: * Plastična orodjarna – cca. 858 x 500 x 500 mm – desno ob strani * Zaprti plastični blatniki spredaj in zadaj * Zaprta bočna zaščita pred naletom * Privijačen zadnji podvoznik (proti podletu) * Odlagalna škatla za kontejnerske mreže iz pocinkanega perforiranega pločevine cca. 1.000 x 500 x 500 mm * Zložljiv zadnji A-šilt * Zadnji odbijač proti udarcem ----Elektrika / Razsvetljava: * EBS sistem z multi-voltage za vlečna vozila z 12 V in 24 V elektriko * 15-polni 24V priključni vtič * LED svetlobna oprema za 12 V in 24 V * 2 dodatna LED vzvratna žarometa * RDÜ sistem za nadzor tlaka v pnevmatikah ----Primerno za dolžine kontejnerjev: * za zabojnike od 6500 mm do 7000 mm ----Kotalna površina kontejnerja / Nagibni most: * Zunanje vodilo valjev iz ravnega jekla z notranjo razdaljo cca. 2.180 mm, skupaj s po 3 centrirnimi vložki na vsaki strani za vodilo kontejnerja * Za namestitev in pritrditev kontejnerskih valjev sta zadaj nameščeni 2 poglobljeni ležaji za valje, povezani z nagibnim okvirjem, s pnevmatsko zaklepno zaščito pred premikanjem v vzdolžni smeri * Mehanska blokada zabojnikov z valji poteka preko v nagibnem okvirju vgrajene in od zunaj upravljane pnevmatske prečne zatezne enote (upravljanje z ene strani) * Notranji podvoznik z nagibnim glavnim okvirjem nazaj – motorno-hidravlična kipalna naprava, enocevna izvedba * Kotalni kot 42° * Gumijaste podloge med podvozjem in nagibnim okvirjem * Potiskanje zabojnika z sprednje strani, vroče pocinkano podvozje ----Pnevmatike: * Enkratna oprema 385/55 R 22,5 ----Višina nakladanja: * Prazno cca. 1.270 mm ----Barvanje: * Podvozna zaščita in zaklepni deli (brez zaključnega laka) * Vrtljivo podvozje, zračni rezervoar, osi, obračalni ležaj in vlečna škarja lakirani v črni barvi * Vroče pocinkano ----Informacije: * Za prevoz zabojnikov po DIN 30722, del 1 * Novo vozilo brez prve registracije s proizvajalčevo garancijo * Napake in vmesna prodaja pridržane ----Dobavni rok: * Na voljo takoj iz Egestorfa

Stanje: novo, največja dovoljena obremenitev: 10.400 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, * ETK-TA-R 14,4: ----Zavore: * EBS * Naprava za sprostitev v sili za vzmetne zavorne cilindre * Bobnaste zavore ----Os: * 2 x 7 t. osi Gigant ----Vzmetenje: * Listnate vzmeti s tandem sistemom za izravnavo ----Vlečna palica / prirobnična vlečna palica: * Vlečna palica, višina nastavljiva za 300 mm, s prirobnično vlečno palico 40 mm ----Elektrika / osvetlitev: * Nadzor tlaka v pnevmatikah z možnostjo prikaza v vozilu prek signala EBS, brez vgradnje v vozilu * 15-polni vtič za elektriko * LED zadnje luči ----Splošni dodatni deli: * mehanska opora spredaj * zadaj 2 mehanski zložljivi opori Bodpfxetr Sucj Ahmslk * plastična orodjarna škatla, približno 750 x 350 x 300 mm, desna stran * vijakni zaščitni odbijač * plastični četrtni blatnik ----Okvir: * Glavni okvir iz finozrnatega jekla ----Nakladalna platforma: * Mrežaste kljuke na straneh in zadaj v ležajih centralnega zaklepanja, ter 2 kosa na čelni steni * Jeklena paleta - dvostranska nakladalna platforma, čelna stena fiksna, izdelana iz gladke pločevine, neprekinjene stranske stene - z možnostjo odklopa, z vzmetjo za dvig stranske stene in nihajnim sistemom prek ročnega centralnega zaklepanja * Zadnji nosilci vijakni * Jeklena zadnja stena vstavljena pred rampami * V vsakem kotu po 1 x 5 t pritrdišč, ter na vsaki strani po 4 x 3 t pritrdišč, vstavljenih v zunanji okvir * 4 mm dno iz finozrnatega jekla ----Rampe: * Dvodelne mehanske rešetaste rampe z aluminijastim končnim delom 2.150 + 1.300 mm x 600 mm (ročno skupaj potiskane do 80 mm) ----Barvanje: * Podvozje, vlečna palica, zadnji nosilci, zaščitni odbijač, mehanske opore in rampe, pocinkane * Os, vzmeti, zračni rezervoar, prirobnična vlečna palica in opora, barvane v črni barvi * Stranske stene in nakladalna platforma v RAL 9010, čista bela * Barvanje stranskih sten in nakladalne platforme v drugem RAL odtenku je možno, po dogovoru ----Informacije: * Novo vozilo z garancijo proizvajalca * Pridržane napake in možnost prodaje ----Dobavni rok: * Na voljo takoj, iz Egestorfa

Stanje: novo, največja dovoljena obremenitev: 10.400 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, * ETK-TA-R 14,4: ----Zavore: * EBS * Sistem za sproščanje zavor v sili za vzmetne akumulatorske cilindre * Bobnaste zavore ----Os: * 2 x 7 ton - osi Gigant ----Vzmetenje: * Parabolične vzmeti s tandem sistemom za izravnavo ----Vlečna palica / prirobnica vlečne palice: * Vlečna palica, nastavljiva po višini za 300 mm, s prirobnico vlečne palice 40 mm ----Elektrika / osvetlitev: * Nadzor tlaka v pnevmatikah z možnostjo prikaza na vozilu prek signala EBS, brez dodatne namestitve na vozilu * 15-polni vtič za elektriko * LED zadnje luči ----Splošni dodatni deli: * mehanska opora spredaj * zadaj 2 mehanski zložljivi opori * plastična orodjarna škatla, cca 750 x 350 x 300 mm, desna stran * vijakljen podvozni ščit * plastični blatnik ----Okvir: * Glavni okvir iz fino zrnate jeklene zlitine ----Nakladalna prikolica: * Obešalne kljuke na boku in zadaj v ležajih centralne zapore, ter 2 kosa na čelni steni * Jeklena paletna nadstavba, dvostransko nakladalna prikolica, čelna stena fiksna, iz gladke pločevine, neprekinjene bočne stene - brez srednjih nosilcev, z možnostjo zlaganja s pomočjo vzmetne naprave in nihanja s pomočjo ročne centralne zapore * Zadnji nosilci vijačeni * Jeklena zadnja stena, vstavljena pred rampami * Na vogalih po 1 x 5 ton, privezni obroči, na boku pa po 4 x 3 tone, vstavljeni v zunanji okvir * 4 mm dno iz fino zrnate jeklene zlitine ----Rampe: * Dvodelne mehanske rešetaste rampe z aluminijastim končnim delom, 2.150 + 1.300 mm x 600 mm (ročno združljivi do 80 mm) ----Barvanje: Bjdpfx Ahetr St Uemelk * Podvozje, vlečna palica, zadnji nosilci, podvozni ščit, mehanske podpiralne opore in rampe, vroče pocinkani * Os, vzmeti, zračni rezervoar, prirobnica vlečne palice in podpiralne opore, pobarvani v črni barvi * Bočne stene in nakladalna prikolica v čisti beli barvi RAL 9010 * Barvanje bočnih sten in nakladalne prikolice v barvnem odtenku RAL je možno proti doplačilu ----Informacije: * Novo vozilo z jamstvom proizvajalca * Pridržujemo si pravico do sprememb in napak * Prodaja je možna, dokler je artikel na zalogi ----Dobavni rok: * Na voljo takoj iz Egestorfa

Stanje: novo, največja dovoljena obremenitev: 18.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA-Kombi 24.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axle: * 3 x 11 t Gigant axles * Centre axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye & height adjustment ----Electrics / Lighting: * LED rear lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Attachments: Bsdpfx Ahopk D Awemslk * Toolbox made of powder-coated sheet steel (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized sheet steel (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash protection * Plastic rear bumper buffer * Mechanical drop-down supports at the rear ----Container / Low-bed platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) to guide roll-off containers * Steel floor with roll grooves in the bogie area * When transporting roll-off containers, container length from 5,500 to 7,000 mm possible * Pneumatic 4-point container locking and mechanically insertable front stop angles in the running rails * Load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ volume possible * Includes 8 repositionable skip stops for lateral centering of skips, front 4 skip stops fitted with pivoting stops ----Load securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements for positive and non-positive securing of skips * 4 cloverleaf lashing points on each side and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Weld bead as anti-slip surfacing in the running area of the access slope * 1 pair of aluminium loading ramps (16 t / pair), 2,800 x 400 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment accessible from the rear) ----Tyres: * Tyres: 235/75 R17.5 ----Ride height: * Ride height, loaded: approx. 1,003 mm ----Payload: * Payload: 18,900 kg ----Paintwork: * Reflective contour marking tape, side and rear * Axles, turntable, drawbar and air tank painted black * Hot-dip galvanized main frame ----Information: * Gross vehicle weight technically possible: 27,000 kg * New vehicle without initial registration with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. week 47/2026