Wörmann 11,9To Tandem 5M 3-S-Öl Ohne Rampen Tüv nakup rabljenega (63.541)

Stanje: novo, največja dovoljena obremenitev: 13.600 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2026, * KA-TA-RT 18.0: ----Brake: * EBS (Electronic Braking System) * Emergency release for spring brake cylinders * Drum brakes Gujdpfx Amevin Ucorsc ----Suspension: * Air suspension with lifting and lowering device, including Ride-Through-Release (RtR) valve and manual lowering function for loading ----Drawbar / Flanged Drawbar Eye: * Drawbar with positive-locking height adjustment * 50 mm flanged drawbar eye ----Electrics / Lighting: * 15-pin 24 V connector * LED tail lights 12 / 24 V fitted in underrun protection ----General Attachments: * Support winch at front * Fold-away rear support legs on the outside * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on right side * Plastic quarter mudguards ----Tipping Body: * Steel pallet – 3-way tipper body made of high-tensile fine grain steel with high M-Strong side panels and reinforced 180 bar tipping cylinder * Fixed front wall made of smooth sheet steel * Hardwood strip for excavator bucket screwed onto front wall * Continuous side panels – fold-down without center pillar, with sideboard spring-assist lifters and swinging function via manual central locking * Bolt-on rear stanchions * Combination steel swing doors at rear, 2-leaf, asymmetrically split, able to swing open 270° and lockable (not foldable), including additional swinging frame for automatic rear door opening when tipping; locking by galvanized rotating bar lock and central locking, deactivation function for automatic rear door opening when tipping backwards with opened swing doors * 4 mm steel floor plate * Two-step access on the left front * Rear ramp track for loading ramps ----Load Securing: * One 7 t lashing ring in each corner * Four 3 t lashing eyes recessed in the outer frame on each side ----Loading Ramps: * Recessed ramp compartment at rear of chassis * 1 pair aluminium loading ramps (10 t/pair), approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles ----Paintwork: * Chassis, drawbar, rear stanchions, front wall, tipping platform, underrun protection, and rear supports hot-dip galvanized * Sideboards painted in any desired RAL colour (excluding special or metallic paints), can be changed up to approx. 6 weeks before completion * Axles, air tanks, flanged drawbar eye, and front support winch painted in black ----Info: * --Load securing certificate according to EN 12642 XL? * Errors and intermediate sale reserved ----Delivery Time: * Available from approx. CW 45 / 2026

Stanje: novo, največja dovoljena obremenitev: 13.600 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2026, * KA-TA-RT 18.0: ----Braking System: * EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Suspension: * Air suspension with lifting and lowering system, including RtR valve and manual lowering for loading operations ----Drawbar / Flange Drawbar Eye: * Drawbar with positive-locking height adjustment * 50 mm flange drawbar eye ----Electrics / Lighting: * 15-pin 24 V connector * LED tail lights 12 / 24 V integrated in underrun protection ----General Attachments: * Landing gear at the front * Fold-out support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Plastic quarter mudguards ----Tipper Body: * Steel 3-way tipper body made of fine-grain steel with high M-Strong side walls and reinforced 180 bar tipping cylinder * Fixed front wall, smooth sheet steel * Hardwood pad for excavator bucket bolted to front wall * Continuous, folding drop sides without central stanchion, with sideboard spring assist and manual central locking system * Screwed-in rear stanchions * Combination steel swing doors, asymmetrical 2-leaf rear wall, can be swung and locked at 270°, not foldable, with additional swinging frame for automatic rear wall opening during tipping, locking via galvanized rotary bar lock and central locking system, deactivation function for automatic rear wall opening when tipping reverse with open swing doors * 4 mm steel floor plate * Two-step entry left front * Rear mounting rail for loading ramps ----Load Securing: * 1 x 7 t lashing ring in each corner * 4 x 3 t lashing rings recessed into the outer frame on each side ----Loading Ramps: * Integrally mounted ramp storage at the rear of the chassis * 1 pair of aluminum loading ramps (10 t / pair) approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles ----Paintwork: * Chassis, drawbar, rear stanchions, front wall, tipping platform, underrun protection, rear folding supports hot-dip galvanized * Sideboard paintwork in RAL custom color (with exceptions for special or metallic paintwork); can be changed up to approx. 6 weeks prior to delivery * Axles, air tanks, flange drawbar eye, front landing gear painted in black ----Information: * --Load securing certificate according to EN 12642 XL? * Subject to errors and prior sale ----Delivery Time: * Available from approx. CW 45 / 2026 Gsdpfovin T Ssx Amreuc

Stanje: novo, največja dovoljena obremenitev: 10.660 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, Leto izdelave: 2026, * KA-TA-R 14.4: ----Braking System: * Wabco EBS (electronic braking system) * Emergency release system for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem compensation unit ----Drawbar / Flange Towing Eye: * Drawbar height-adjustable by 300 mm with 40 mm flange towing eye ----Electrics / Lighting: * 15-pin power plug * LED tail lights 12/24 V * Tire pressure monitoring with display option in the truck via EBS signal – no truck-side installation required ----General Attachments: * Jost mechanical landing gear at front * 2 mechanical foldable support legs at rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted at the front right side of the chassis * Bolted underride guard * Plastic quarter mudguards ----Tipping Platform: * Mesh hooks positioned at the central locking mountings and 2 at the front bulkhead * Steel pallet - 3-way tipper body with reinforced Strong sidewalls (continuous upper sidewalls with internal tube reinforcement – without central stanchions – foldable with sidewall spring lifting device) * Screw-fixed rear stanchions * Combination steel wing doors at rear, 2-leaf, asymmetrically split, can be swung and locked up to 270° (not foldable), with additional swinging frame for automatic tailgate opening during tipping; locking by galvanized rod lock at rear and central lock; deactivation function for automatic tailgate opening during rear tipping with opened wing door * 4 mm fine-grained steel floor plate ----Load Securing: Guodpfxex Hm Rco Amrsc * 1 x 5 t lashing point in each corner * 4 x 3 t lashing rings recessed in the outer frame on each side ----Chassis: * Chassis made of fine-grained steel ----Ramps: * Rear mounting track for deployable ramps * 1 pair of aluminium ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment for ramps integrated below the loading area in the chassis at the rear ----Tyres: * Tyre size 358/55 R 19.5 ----Painting: * Drawbar, underride guard, rear stanchion, and rear foldable support legs hot-dip galvanized * Axles, springs, air tank, and landing gear painted in black shade * Sidewalls painted in RAL colour of choice (no special or metallic paint) – can be modified up to approx. 6 weeks before completion ----Other Information: * Reinforced body with load securing certificate * Errors and prior sale excepted * Sample images ----Delivery Time: * Immediately available from calendar week 29/2026

Stanje: novo, največja dovoljena obremenitev: 10.660 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, Leto izdelave: 2026, * KA-TA-R 14.4: ----Brakes: Gsdpfjx Hm Riex Amrouc * Wabco EBS (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer assembly ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm, with 40 mm flange drawbar eye ----Electrics / Lighting: * 15-pin power connector * LED rear lights 12/24 V * Tire pressure monitoring system with in-cab display via EBS signal – no truck-side installation required ----General Attachments: * Jost mechanical landing leg at the front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted right front of the chassis * Bolted underrun protection * Plastic quarter mudguards ----Tipper Body: * Net hooks mounted at the positions of the central locking as well as 2 pieces on the front wall * Steel pallet 3-way tipper body with reinforced strong side walls (continuous side walls with internal tube reinforcement – without intermediate stakes – drop-down with board wall spring lifter) * Rear uprights bolted * Combination steel swing doors at the rear, two-leaf, asymmetrically split, pivotable and lockable at 270° – not drop-down – with additional pendulum frame for automatic rear wall opening during tipping, locking via galvanized rotary latch at the rear and central locking. Deactivation function for automatic rear wall opening when tipping backwards with open swing door * 4 mm fine-grain steel floor plate ----Load Securing: * 1 x 5 t lashing point in each corner * 4 x 3 t lashing rings each side, integrated into the outer frame ----Chassis: * Chassis made from fine-grain steel ----Ramps: * Rear ramp rails for drive-on ramps * 1 pair of aluminium drive-on ramps approx. 3,570 x 410 mm (load capacity 10 t/pair) suitable for rubber-tyred and tracked vehicles * Lockable storage compartment for the ramps integrated into the chassis under the loading bed, accessible from the rear ----Tyres: * Tyres 358/55 R 19.5 ----Paintwork: * Drawbar, underrun protection, rear upright, and rear folding supports hot-dip galvanized * Axles, springs, air reservoir, and landing leg painted in black tone * Side walls painted in a RAL colour of your choice (no special or metallic paint) – can be changed up to about 6 weeks before completion ----Information: * Reinforced body with load securing certificate * Errors and prior sale excepted * Sample images ----Delivery time: * Available immediately from CW 29/2026

Stanje: rabljeno, prevoženi kilometri: 18.709 km, moč: 330 kW (448,67 KM), prva registracija: 04/2024, vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, barva: bež, vrsta prenosa: samodejen, emisijski razred: Euro 6, Leto izdelave: 2023, Oprema: ABS, filter saj, klimatska naprava, navigacijski sistem, pogon na vsa štiri kolesa, Like new / Original mileage / Ready for immediate use Body: • Body type: Hooklift system • Model: Hyva 26-51-S • Hydraulic locking • Mechanical underride guard • Oil connections at rear • Net box Equipment: • Cab: M ClassicSpace, 2.30 m wide, 320 mm engine tunnel • Air conditioning • Driver’s seat: Comfort air-sprung seat • High engine tunnel storage compartment • Tinted windscreen with sunstrip • Rear cab window • Steel-sprung cab, comfort specification • 50 mm trailer coupling (AHK) with dual-line braking system • Front axle load: 8.0 t • Front suspension: 8.0 t, 3-leaf springs • Rear suspension: 2x10 t, heavy-duty • 12-speed gearbox - Type: G 330-12 • Rear axle: 300 mm crown wheel • Interior filter for construction vehicles • Cooling system for hot climates • Cyclone air filter • Rear engine PTO • 290-liter fuel tank with protective plate • Twin-plate clutch • Manual sliding roof (steel) Technology: • Navigation system • Multifunction steering wheel • Audio system: Digital radio DAB / DAB+ • Interactive multimedia cockpit • Rotating beacons • Pre-wiring for 4 surround cameras (display in dashboard monitor) • Rain sensor • Circuit breaker • Heated manoeuvring/front mirror • Automatic headlights (light sensor) • Electric windows Safety/Environment: • Reinforced engine brake • Selectable all-wheel drive • Front axle differential lock • Emission standard EURO 6 Other: Guedpfx Amoy Eakaerjc • First delivery in Germany • 1 previous owner • Wheelbase variant: 3900 mm • Axle configuration: 6x6 • Model: Arocs 5, A • Suspension: leaf/leaf • Engine: 12.8 L – 330 kW inline-six diesel (OM 471) • PTO: MB 131-2c • Permissible total weight: 26,000 kg • COC papers available • Max. permissible gross train weight: 66,000 kg • Like-new condition • NO LS control Since 1972 your reliable partner for all things automotive and commercial vehicles in 28832 Achim, near the Bremer Kreuz. NutzfahrzeugZentrum Behnke continuously stocks around 200 vehicles across vans, commercial vehicles, and construction machinery! We continually offer attractive financing options at special rates. We are happy to provide individual quotations tailored to your needs! Trade-in of your commercial vehicle/construction machinery is welcome. If a new TÜV inspection is required, we will gladly make you an offer from our partner workshops. Our offers generally do NOT include a new TÜV inspection. Delivery of your "new" commercial vehicle is possible via our external partners for an additional charge. All details in advertisements, internet listings, price tags, and images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typographical or data transmission errors. Listed equipment is subject to separate verification as required. Subject to errors and prior sale.

Stanje: rabljeno, lastna masa: 4.500 kg, največja dovoljena obremenitev: 13.500 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 08/2015, naslednji pregled (TÜV): 07/2025, dolžina tovornega prostora: 4.800 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 1.000 mm, barva: modra, Leto izdelave: 2015, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, * German trailer * Condition as shown in photos * Müller-Mitteltal three-way tipper, model KA-TA-R 18.0 tandem * Tipper dimensions: 4,800 x 2,400 x 1,000 mm * Roll tarp Gsdpowz H Nbofx Amrsuc * Air suspension * Disc brakes * Platform * Jost landing gear * Payload: 13,500 kg If a new TÜV inspection is required, we are happy to offer this through our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, and without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspecting the goods, to avoid any misunderstandings regarding their condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged. All details are without guarantee. We do not assume liability for errors or incorrect information in the listing. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 07/2020, dolžina tovornega prostora: 5.750 mm, širina tovornega prostora: 2.150 mm, višina nakladalnega prostora: 900 mm, medosna razdalja: 1.000 mm, vrsta prenosa: drugo, voznikova kabina: drugo, zavore: drugo, * German trailer * 1st owner * Condition as shown in photos * Special trailer with tridem axle and split loading platform * Front section with mesh extension, electrically tiltable on both sides * Behind: flatbed/platform/low loader with loading ramps * Large flatbed loading area with phenolic plywood floor and DIN lashing eyes * Ideal for landscaping, construction industry, and much more * Loading area dimensions: 3.75 m x 2.15 m x 0.35 m, aluminium loading side panels * Payload: 2,230 kg * Tipping area dimensions: 2.00 m x 2.15 m x 0.90 m * Electric tipping drive with cable remote control * 100 km/h approval * Tipper bed with steel floor * Tridem axles * GVW: 3,500 kg * Unladen weight: 1,270 kg * Payload: 2,230 kg If a new TÜV inspection is required, we will be pleased to provide a quote from our partner workshops. Gusdpfx Ajxnqv Aomrec Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, without new UVV. Further trucks can be found on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that there are no misunderstandings regarding their condition and suitability. Inspection and viewing are possible at any time by appointment and are expressly desired. All information provided without guarantee. We do not accept liability for mistakes or incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to prior sale, changes, and errors.

Stanje: rabljeno, največja dovoljena obremenitev: 8.750 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, prva registracija: 06/2024, skupna širina: 2.550 mm, Leto izdelave: 2023, Müller Mitteltal KA-TA-R 11.9 Tandem 3-Way Tipper with many extras. Gross weight: 11,900 kg. Standard payload approx.: 8,750 kg. Internal dimensions: 5,000 x 2,420 x 500 mm. Tyres: 385/55R19.5. 4-coat single-color paint. Wheels: silver. Chassis/underrun protection: hot-dip galvanized. Platform with front wall: hot-dip galvanized. Axles/springs/air reservoir, etc.: black. Side and rear wall: RAL 2011 deep orange. Reinforced and certified superstructure according to EN 12642 XL including load securing certificate (only in combination with 500 mm high steel side walls). Rear stanchions bolted, hot-dip galvanized, without topcoat. Lashing points LC 5,000 daN, recessed at the front. Mesh hooks integrated laterally and at the rear into the locks of the central locking for the base side wall, as well as an additional 2 pieces on the front wall. BPW axles instead of GIANT. Tipping platform with fixed-mounted front wall in hot-dip galvanized version, with bolted, galvanized rear stanchions, without additional coating (not on HARDOX floor). Due to the system, waviness may occur during hot-dip galvanizing, especially on wide floor plates – warranty claims for this are excluded. Tyres 385/55R19.5 instead of 235/75R17.5 (floor and coupling height + approx. 110 mm, Code 08.940, ramp length 3,570 mm required). 1 piece plastic toolbox, black, lockable, W=750 x H=350 x D=300 mm (45 kg payload with evenly distributed load), mounted: on the chassis frame on the right in direction of travel. 1 pair of aluminium loading ramps without wheel channel (8 t/pair), 3,570 x 400 x 105 mm, suitable for rubber-tyred and tracked vehicles, 55 kg/piece. Two-step access in front of the front wall, left side in direction of travel (hot-dip galvanized). Connecting lines extended for agricultural and forestry towing vehicles. Further information Gedpfx Amsvy Tvtjreuc New: No

Stanje: novo, največja dovoljena obremenitev: 23.920 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, NOVO VOZILO Fliegl 3-osni nizkopodni priklopnik tipa DTS 300, vroče pocinkan Gedpfx Amoxb Nmyerouc Skupna masa 24.000 kg / 30.000 kg Nosilnost 17.920 kg / 23.920 kg Lastna teža 6.080 kg Skupna dolžina 10.900 mm Nakladalna dolžina 8.680 mm Nakladalna površina 6.500 mm vključno z 900 mm nakladalnim nagibom Parabolično vzmetenje Dolge rampe 2.800 mm s hidravličnim upravljanjem Razširitev na 3.000 mm z opozorilnimi tablami in rotacijsko lučjo Velik komplet za pritrjevanje z zateznimi točkami 5,0 in 10,0 ton 5 parov žepov za nosilce Vlečni obroč 40 mm plus prevoz/stroški priprave iz skladišča Wiesmoor 1.280,00 €/neto Ponudba najema z odkupom: doba 48 mesecev, preostala vrednost 40 %, predujem samo DDV. Mesečna najemnina: 500,00 EUR

Stanje: novo, največja dovoljena obremenitev: 8.840 kg, skupna masa: 11.800 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.200 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, Overall length: 8,000 mm Loading length: 6,200 mm including rear bevel Additional information: plus delivery/preparation ex-stock location 26639 Wiesmoor €1,280.00 net Loading width: 2,480 mm Chassis: central axle trailer Fine-grain steel welded construction Slightly sloped outer frame, new design with "Load-Lock profile" for securing lashing straps Pair of lashing eyes on the outer edge of flooring, each rated 5t: 1 x in the front corners, 1 x in front of and 1 x in the rear bevel 6 pairs of lashing eyes on the outer edge of floor/frame, each rated 5t Gear support leg at front Foldable rear support Wheel chocks with holder Aluminium side underrun protection Galvanised steel rear underrun protection Full-width rear mud flap (not in conjunction with forklift mounting) Quarter shell mudguards 1 plastic toolbox, W=600 / H=425 / D=460 mm, lockable Drawbar for central axle trailer Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 300 mm Axles & Suspension: GFA or BPW axles as per manufacturer’s choice, with tapered roller bearings and S-cam brakes "Axle/chassis laser alignment" reduces tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical load compensation (rocker suspension) Brake System: 2-line compressed air brake system Colour-coded line routing for easy servicing Manual spindle parking brake 2 confusion-proof coupling heads at front, with connecting lines to tractor unit 24 volt ABS and ALB, ABS plug at the front with connecting cable Note: The trailer may only be towed by vehicles capable of ensuring ABS functionality! Wheels and Tyres: Guedpoyl E Dqsfx Amrjc 235/75 R17.5, make as per manufacturer’s choice Steel rims, factory silver Electrics: 24 volt, multi-chamber lights, yellow LED side marker lights 2 white position lights at front, LED 2 white/red lane marker lights at rear 2 x 7-pin confusion-proof connectors at front, with connection cable Floor: Steel/chequer plate flooring for high point load capacity Note: Slight floor waviness due to welding distortion possible! Platform length approx. 6,200 mm Rear bevel approx. 900 mm Front wall / front corner posts: 25 mm aluminium hollow section, 400 mm high Side walls: 25 mm aluminium hollow section, 400 mm high, foldable and removable Centre posts: Without centre posts Rear wall / rear corner posts: 1 pair of steel posts mounted to the frame with provision for securing loading ramps, entrance width approx. 2,430 mm Loading ramps: Steel ramps 2,300 mm long, 510 mm wide, laterally adjustable With carrying handle on ramps Wooden covering (front end area in steel/chequer plate) With gas strut for one-man operation Operating information: The specified gross weight is technically achievable; however, depending on the type of load, the permitted gross weight may not be reached due to permissible axle/support/kingpin loads. (Poor driving and trailing behaviour due to incorrect load distribution possible) Registration country / plates: Germany With Dekra inspection and certification (according to §13 EG-FGV) 24/7 service hotline Prepared for single-line registration plate holder Contour marking with reflective strips in accordance with ECE R 048, white on sides and red at rear Paintwork: Frame DB 7350 Novagrau Front wall aluminium Side walls anodised aluminium Loading ramps hot-dip galvanized

Stanje: novo, največja dovoljena obremenitev: 8.840 kg, skupna masa: 11.800 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.200 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, New Fliegl tandem low-loader with ramps, model TPS 118 Chassis fully hot-dip galvanized – sidewalls aluminum Vehicle from current production – delivery time approx. two weeks Gross weight: 11,800 kg Empty weight: 2,960 kg Payload: 8,840 kg Total length: 8,000 mm Loading length: 6,200 mm incl. rear slope Width: 2,550 mm Loading height: 900 mm Further information Gujdpfx Aov E Dqlsmrjc plus pre-carriage / handling from storage location 26639 Wiesmoor €1,280.00 net Loading width: 2,480 mm Chassis: Central axle trailer Fine-grain steel welded construction Slightly sloping outer frame, new design with "Load-Lock profile" for lashing strap attachment 3 pairs of lashing rings on the exterior floor, each 5t 1x front corners, 1x in front and 1x in the rear slope at the back Pair of lashing rings on the exterior floor / outer frame, each 5t Support leg at front Foldable rear support 2 wheel chocks with holder Side impact protection aluminum Underrun protection galvanized steel Spray flaps at the rear across the full width (not in conjunction with forklift holder) Quarter-shell fenders 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Drawbar arrangement for central axle trailer Drawbar with certified 40 mm towing eye Height-adjustable drawbar via spindle, max adjustment 300 mm Axles + Suspension GFA axles with tapered roller bearings and S-cam brakes "Axle/chassis laser alignment" reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load balancing (rocker equalizer) Brake system 2-line compressed air brake system Color-coded line layout for easier servicing Hand spindle parking brake 2 key-proof coupling heads at front, with connection lines to towing vehicle 24 volt ABS and ALB, ABS socket at front, with connecting cable Note: The trailer may only be towed by vehicles that ensure proper ABS functionality! Wheels and Tires 4 x 235/75 R17.5, brand at manufacturer’s discretion 4 steel rims, factory silver Electrics 24 volt, multi-chamber taillights, side yellow LED lighting 2 white position lights at front LED 2 white/red lane marker lights at rear 2 x 7-pin key-proof plugs at front, with connecting cable Floor Steel / checker plate floor for high point load capacity Note: Light floor warping due to welding distortion possible! Platform length: approx. 6,200 mm Rear slope approx. 900 mm Front wall / front corner stanchions 25 mm aluminum hollow profile, 400 mm high Sidewalls 25 mm aluminum hollow profile, 400 mm high, foldable and removable Central stanchions 1 pair of folding stanchions in sidewall height, foldable and removable Rear wall / rear corner stanchions 1 pair of steel stanchions bolted to frame with holder for ramp locking, entry width approx. 2,430 mm Loading ramps 2 steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable with handgrip on ramps wood-covered (ramp tip with steel/checker plate) gas strut for single-operator handling Paintwork Frame hot-dip galvanized with passivation "15-year warranty against rust-through" Front wall RAL 9006 white aluminum Sidewall RAL 9006 white aluminum Loading ramps hot-dip galvanized Hire purchase offer: 48-month term, down payment only VAT, residual value 40%, monthly installment EUR 350.00

Stanje: rabljeno, največja dovoljena obremenitev: 7.480 kg, skupna masa: 10.500 kg, konfiguracija osi: 2 osi, prva registracija: 05/2007, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, Skupna masa: 10.500 kg Lastna masa: 3.020 kg Nosilnost: 7.480 kg Gujdpfx Amsw Nu Nderjc Skupna dolžina: 6.750 mm Dolžina nakladalne površine: 5.000 mm Širina: skupna širina 2.550 mm / širina kesona 2.470 mm Nakladalna višina: cca 900 mm Dodatne informacije - 500 mm stranice z dvigovalno pomočjo - zložljive, snemljive - GFA osi - Zadnja podpora - LED vzvratna luč - Plastična škatla za orodje - Rampi za nalaganje opcijsko za doplačilo 1.150,00 € Več tandemskih tristranskih prekucnih prikolic – nove in rabljene – na voljo takoj.

Stanje: rabljeno, največja dovoljena obremenitev: 7.100 kg, skupna masa: 10.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2007, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.450 mm, višina nakladalnega prostora: 1.100 mm, skupna širina: 2.550 mm, Vozilo / Nadgradnja: Tandem tri-stranski prekucnik Prva registracija: 07/07 Skupna masa: 10.000 kg Lastna masa: 2.900 kg Nosilnost: 7.100 kg Skupna dolžina: 6.900 mm Dolžina nakladalne površine: 5.000 mm Širina: 2.550 mm / širina nakladalne površine cca 2.450 mm Višina nakladanja: cca 1.100 mm Dodatne informacije - 40 km/h - 500 mm stranice - 500 mm pocinkovani sprednji nastavek - 7 parov pritrdilnih obročev na nakladalni površini Gsdpfx Amoyz H Azerjuc - 4 pari pritrdilnih obročev pod zunanjim delom nadgradnje - Podporna noga - Zadnja opora - Dvižna vzmet za stranico - Nakladalne rampe opcijsko 1.280,00 €

Stanje: rabljeno, največja dovoljena obremenitev: 23.700 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2023, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, Total weight: 24,000kg / 30,000kg Gjdpfowrv Saox Amrjuc Unladen weight: 6,300kg Payload: 17,700kg / 23,700kg Overall length: 10,900mm Loading length: total 8,600mm; 6,500mm including rear bevel; 2,100mm gooseneck Width: 2,550mm Loading height: 900mm Further information: - Heavy-duty welded construction made from high-strength fine grain steel - Hot-dip galvanized - Rear support - Twin wheels 235/75R17.5 - Warning panels - LED reversing lights - Lashing points on outer frame - Lashing rings: 4x gooseneck, 6x low bed (10,000 daN) - Single-piece hot-dip galvanized loading ramps (3,100mm x 750mm), 50mm softwood decking, laterally adjustable - Storage box in gooseneck - Plastic toolbox - Bumper - Floor with 50mm softwood decking - Climbing strips on rear loading gradient

Stanje: dober (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 07/2015, vzmetenje: zrak, velikost pnevmatike: 385/55R22.5, medosna razdalja: 5.240 mm, barva: črn, Leto izdelave: 2015, Konfiguracija osi Guedezcdf Ijpfx Amroc Dimenzije pnevmatik: 385/55R22.5 Vzmetenje: zračno vzmetenje Sprednja os: Največja dovoljena obremenitev osi: 9.000 kg; Profil pnevmatike levo: 50 %; Profil pnevmatike desno: 50 % Zadnja os 1: Dvigljiva os; Največja dovoljena obremenitev osi: 9.000 kg; Profil pnevmatike levo: 30 %; Profil pnevmatike desno: 30 % Zadnja os 2: Največja dovoljena obremenitev osi: 9.000 kg; Profil pnevmatike levo: 50 %; Profil pnevmatike desno: 50 % Teže Lastna teža: 3.420 kg Nosilnost: 23.580 kg Dovoljena skupna masa: 27.000 kg Vzdrževanje, zgodovina in stanje APK (Tehnični pregled): preverjeno do 02.2027 Tehnično stanje: dobro Vizualno stanje: dobro Identifikacija Registrska oznaka: 74-WN-GD

Stanje: rabljeno, prevoženi kilometri: 69.340 km, moč: 125 kW (169,95 KM), prva registracija: 10/2014, vrsta goriva: dizel, lastna masa: 2.055 kg, največja dovoljena obremenitev: 1.445 kg, skupna masa: 3.500 kg, medosna razdalja: 3.000 mm, naslednji pregled (TÜV): 04/2028, barva: srebrn, voznikova kabina: drugo, vrsta prenosa: mehanski, emisijski razred: Euro 5, vzmetenje: jeklo, število sedežev: 3, dolžina tovornega prostora: 2.810 mm, širina tovornega prostora: 210 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2014, največja hitrost: 160 km/h, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, nadzor oprijema, računalnik na krovu, Welcome to Automobile Köhnen GmbH Vehicle Number / Listing Number: 1040 On-site inspections are only possible by prior telephone appointment. Your new companion can be financed quickly and easily – excellent terms available through our partner banks. Please contact us for details. For sale: Iveco Daily 35S17 Dropside/Flatbed with the following specifications: General Information: * German vehicle * 1 previous owner * 3 keys * COC (Certificate of Conformity) available * VAT can be shown separately * Non-smoker, pet-free * No repainting * 3.0-litre, 170 hp * Ladder rack * Towbar (3,500 kg) * Payload: 1,445 kg * 3 seats * Radio hands-free system * Power steering * Armrest * Multifunction steering wheel * High-quality, large storage box with flap * Wooden loading floor * Storage compartments on both sides Maintenance & Service: * Last service: new prior to delivery * MOT (TÜV): new prior to delivery incl. test report * Winter tyres: * Front axle 70% * Rear axle 50% * All-season tyres: * Front axle 80% * Rear axle 70% * Brakes: * Front axle 90% * Rear axle 80% Gedpfsy E T Nvsx Amreuc * 1 owner, superbly maintained condition with extensive equipment, incl. new service and new technical inspection (TÜV) If you have further questions, feel free to contact us by email, WhatsApp, or phone. We are happy to provide additional pictures and videos upon request. If we have aroused your interest, please contact us directly: Mr. Timo Kühndahl WhatsApp Email: Speaks English Speaks German Mr. Fabian Köhnen WhatsApp Email: Speaks English Speaks German Our services for customers: - Trade-in of passenger cars, trucks & commercial vehicles - Quick and simple financing through our partner banks - Used vehicle warranty available from €490 up to 150,000 km - Delivery available upon arrangement - Pre-delivery inspection (TÜV) available upon arrangement - Pick-up from main train station & airport available upon arrangement - Export service: number plates & document preparation for the EU and non-EU countries - Net delivery without deposit also possible Optional equipment: * Storage package * Towbar: ball-type coupling * 13-pin trailer socket * Audio system: radio with CD player (MP3-compatible), USB, and Bluetooth hands-free system * Electrically adjustable and heated exterior mirrors * Rear axle suspension: parabolic (reinforced) * Spare wheel (road tyres) * Spare wheel carrier between longitudinal beams Standard equipment: * Driver’s airbag * Anti-lock braking system (ABS) * Traction control system (ASR) * Rear-wheel drive * Model: S series * Brake assist * Electronic brakeforce distribution * Electronic stability program (ESP) * Front axle suspension: transverse leaf spring * Electric windows * Tinted windscreen and side windows * 150A generator * 6-speed gearbox * Body/construction: standard flatbed * Fuel tank: 70 litres * Headlight range adjustment * Engine: 3.0 litre – 125 kW Diesel CAT * Radio pre-installation with speakers * Wheelbase: 3000 mm * Diesel particulate filter * Low emissions according to Euro 5 standard * Power steering * Cab seating: double passenger seat with head restraints * Daytime running lights

Stanje: rabljeno, prevoženi kilometri: 45.000 km, prva registracija: 07/2020, skupna masa: 11.990 kg, konfiguracija osi: 2 osi, barva: bela, vrsta prenosa: mehanski, emisijski razred: Euro 6, MAN TGL 12.250---- * TRISTRANSKI NAGIBNI TOVORNJAK * MEILLER NADGRADNJA * ROČNI MENJALNIK * 3-SEDEŽNO VOZILO * KLIMA NAPRAVA * ASISTENT ZA VOZNI PAS * DIFERENCIALNA ZAPORA * NOSILNOST cca 6.300 KG * 6-VALJNI MOTOR * NEMŠKO VOZILO * IZ 2. LASTNIŠTVA Guedey Tf T Ajpfx Amroc IZVOZ / OPOMBA PRODAJA ZA IZVOZ SAMO S KAVCIJO (POLOG) MIN. 500¤ – 2.000¤ PRI PRODAJI V EU IN TRETJE DRŽAVE SE ZAHTEVA KAVCIJA V VIŠINI NAJMANJ 500,00 ¤ / 1.000,00 ¤. CARINSKA NAJAVA EXW MOGOČA V 10 MIN. (POOBLAŠČENI IZVOZNIK). MOŽNE 5-DNEVNE, 15-DNEVNE, 30-DNEVNE TABLICE TER 15-DNEVNE AVSTRIJSKE TABLICE. REZERVACIJE VOZIL PROSIMO LE PREKO E-POŠTE. USTNE REZERVACIJE NISO VELJAVNE. PRIDRŽUJEMO SI PRAVICO DO SPREMEMB, NAPAK IN PREDHODNE PRODAJE.

Stanje: rabljeno, največja dovoljena obremenitev: 12.540 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, prva registracija: 09/2019, naslednji pregled (TÜV): 09/2026, dolžina tovornega prostora: 7.300 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 2.200 mm, Oprema: ABS, dvižna zadnja plošča, * Vehicle number: P19065 A * 2 axles (tandem) * Full air suspension * Frigoblock EK 25U refrigeration unit * Drive/electric cooling * ABS * Wüllhorst body * Lifting/lowering device * EBS * Wüllhorst system 2500kg tail lift * Toolbox * Disc brakes * Through-loading system * SAF axles * Tyres - 1st axle: 385/55R22.5 * Tyres - 2nd axle: 385/55R22.5 * Internal dimensions: L: 7.30m W: 2.50m H: 2.20m Gedeyk N Ttepfx Amrjuc * TÜV valid until 09-2026 MILEAGE ACCORDING TO ODOMETER Important note: Sale is exclusively to traders or for export. The vehicles are used and sold as-is – with exclusion of any liability for material defects (§ 444 BGB). Warranty and guarantee claims are excluded; inspection and viewing prior to purchase are expressly recommended. No guarantee is given for the function of special equipment and extras. Company logos or advertising decals shown in the photos may have been digitally altered. Subject to prior sale, errors and typographical mistakes excepted. Languages: German, English, Greek, Russian, Croatian, Italian, Spanish, French, Turkish, Romanian and Arabic.

Stanje: rabljeno, največja dovoljena obremenitev: 11.080 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 06/2017, naslednji pregled (TÜV): 06/2026, dolžina tovornega prostora: 7.500 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 2.200 mm, Oprema: ABS, dvižna zadnja plošča, * Vehicle number: P19074 A * 2 axles (tandem) * Full air suspension * Frigoblock EK U25 refrigeration unit * Drive/Electric cooling * ABS * WÜLLHORST body * Lifting/lowering device * EBS Gedpfeyh Snlox Amrouc * BÄR 1500kg tail lift * Tool box * Disc brakes * Through-loading system * 2 evaporators * Partition wall * Sliding partition wall * SAF axles * Tires - 1st axle: 385/55R22.5 * Tires - 2nd axle: 385/55R22.5 * Internal dimensions (L x W x H): 7.50m x 2.50m x 2.20m * TÜV valid until 06-2026 Important Notice: Sale is exclusively to traders or for export. These are used vehicles sold as-is, with all liability for material defects excluded (§ 444 BGB). Neither guarantee nor warranty is provided. Inspection and evaluation prior to purchase are expressly recommended. No guarantee is provided for the function of special equipment or extras. Company logos or advertising markings visible in the photos may have been digitally altered. Errors, typographical mistakes, and prior sale reserved. Languages spoken: German, English, Greek, Russian, Croatian, Italian, Spanish, French, Turkish, Romanian, and Arabic.

Stanje: rabljeno, lastna masa: 10.100 kg, največja dovoljena obremenitev: 38.900 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2025, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, velikost pnevmatike: 245/70 R 17,5, barva: siv, Leto izdelave: 2025, For every used semi-trailer, you receive a current and complete inspection and functional report. Chassis: - Robust steel frame welded construction with front cranked frame and flat loading area, inclined at the rear approx. 500x100 mm - Frame neck 200 mm with chamfered corners - Sloped end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in the rear sloped area) - 2 kingpin settings with replaceable 2" kingpin - Outer frame closed outward as perforated external frame for lashing with tension straps (chains not possible) - Reinforced frame design / point load at the center of gravity - Provisions for extendable load floor widenings - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting after 2nd axle to end of vehicle - 1 pair of wheel recesses in front of the axle with steel covers - (Covers with Körapur coating), depth approx. 400 mm, and 1 pair of wheel recesses between 1st and 2nd axle steel covers - Underrun protection = extended end plate - Drop-down supports at rear Ramps: - 2-piece special-design loading ramps, mechanically extendable - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lift (only in conjunction with electrohydraulic unit) - Width approx. 800 mm - Wood surface - Incl. traction ribs on loading ramps - Can be secured in driving position with tension straps - Actuated via control lever mounted to the right at rear in direction of travel - Laterally hydraulically adjustable Floor: - 35 mm larch wooden floor with aluminum omega profiles Landing Gears: - Mechanical 24t landing gears with one-side operation and push rod compensation Axles, Steering and Tyres: - BPW air suspension axles, each 10t axle load, air bag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lift and lower mechanism with total lift approx. 200 mm - 2nd driving position via ball valve +50mm - 1st axle lift axle (wired via EBS), fully automatic control with mechanical emergency operation via button on the trailer - 3rd axle self-steering trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, with centered offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring Accessories: - Plug-in side and rear walls approx. 400 mm high on gooseneck - Spare wheel holder - Lateral aluminum side underrun protection - 4 wheel chocks with holders - Long license plate holder in end plate Gujdpjzabnbofx Amrjc - 1 ECE-board insertable at the rear - 11 pairs of ZK modules 10t laterally: - 2x on the gooseneck - 9x on the loading area - Extendable warning signs incl. 3 position lights each, at front on landing gears and rear before end plate, infinitely extendable up to loading width of 4,500 mm - 4 fittings for warning signs, plug-in to pockets on loading area - 6 pairs of stake pockets at sides for stakes 100x50 mm - 2 rows of crosswise stake pockets for stakes 100x50 mm on gooseneck from outer frame inwards up to main frame (1x before and 1x after kingpin positions) - 3 rows of crosswise stake pockets for stakes 100x50 mm on load area from outer frame inwards up to main frame (1x front, 1x before 1st axle, 1x after 3rd axle) - 2 pairs of steel plates in loading area for container locks to accommodate one 20ft container - Rubber skirt mounted on underrun protection

Stanje: rabljeno, skupna masa: 1.400 kg, prva registracija: 01/1999, At ANHÄNGERWIRTZ, over 100 used trailers and more than 740 new trailers are available directly from stock. Alternatively, secure your desired model with your preferred equipment and color at an attractive price now. Are you interested in purchasing this pictured trailer or another model? Viewings are expressly encouraged but can only take place by appointment! To schedule an appointment, please contact us at: Non-binding example: used Westfalia box trailer Comfort chassis, cargo space approximately 260x130x30 cm First registered in 1999 Available upon agreement Inspection overdue (no TÜV), significant signs of use – repairs required The trailer is offered and sold as seen! For more offers, visit our online shop at trailershop.de, available around the clock. We accept trade-ins for all trailers at our location and offer financing options starting from €0 down payment. Gedpfx Aon E Rupsmrjuc Viewings by appointment only! Jägerhof 10 A 41516 Grevenbroich (Hülchrath) Sales opening hours: Mon. – Fri. 08:00 – 12:30 and 14:00 – 18:00 used westfalia kl3035 05/26

Stanje: rabljeno, številka stroja/vozila: AHW used ckc400, skupna masa: 660 kg, prva registracija: 04/1955, Leto izdelave: 1955, One of over 130 used examples: Example of a used passenger car box trailer! Guedpfx Amji Nubusrsc Low loader, 80 km/h chassis without brakes Classic car, first registration 1955 Valid technical inspection until— Internal dimensions approx. 117 x 97 x 38 cm, railing 46 cm External dimensions approx. 280 x 158 cm 7-pin connector As always, inspections at our location are expressly encouraged! Load floor and wooden panels should be replaced at the next opportunity Gross vehicle weight 660 kg The trailer is offered and sold as-is, in need of repair and, as always, inspections are expressly encouraged. Sale by appointment on site during our business hours Closed on Saturdays Differential taxation according to § 25 UStG Images and description in this advertisement are protected by copyright—logos and trademarks are protected. 05/25

Stanje: rabljeno, prevoženi kilometri: 215.118 km, moč: 120 kW (163,15 KM), prva registracija: 05/2018, vrsta goriva: dizel, skupna masa: 3.050 kg, barva: modra, vrsta prenosa: samodejen, emisijski razred: Euro 6, število sedežev: 2, dolžina tovornega prostora: 2.580 mm, širina tovornega prostora: 1.650 mm, višina nakladalnega prostora: 1.380 mm, Leto izdelave: 2018, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, No. 40 - You can find this and many other inspected Mercedes-Benz transporters on our website: ---- Mercedes-Benz Vito 116 CDI Compact, with numerous extras, from second owner. Factory-upgraded permissible gross weight to 3.05t. New HU/AU (TÜV) valid until 05/2028; also fitted with new rear brake discs and pads, plus a fresh oil change. Key extras include: 7G-Tronic Plus automatic transmission, LED-ILS headlights, Driver Comfort Package, air conditioning, parking assistance (…) ---- Permissible gross weight: 3,050 kg Curb weight: 2,000 kg Payload: approx. 1,050 kg Emission standard: EURO 6, with AdBlue tank Wheelbase: 3,200 mm Cargo hold dimensions LxWxH (approx. in cm): 258 x 165 x 138 VIN: WDF44760113466738 Warranty available with co-payment COC document present 2 keys ----* New TÜV, fresh oil change, new rear brakes * Mercedes-Benz Vito 116 CDI Compact * 7G-Tronic Plus automatic transmission * LED-ILS headlights * Air conditioning * Driver Comfort Package * Front and rear parking assist, self-steering * 270° rear doors * Audio 10 * Cruise control * Multifunction steering wheel * Leather steering wheel * Double front cup holder * Driver and passenger airbags * LED cargo area lighting * Two-way speakers, front * On-board computer * Hands-free system * Driver assistance system: Attention Assist (fatigue detection) * Driver assistance system: Crosswind Assist * ASSYST service interval display * Electric windows * Central locking * And much more ---- Errors, changes, and prior sale reserved Special equipment: Audio system Audio 10, Equipment package: Driver Comfort, electrically adjustable & heated exterior mirrors (both sides), additional (reinforced) battery, fixed window, front right in cargo/passenger compartment, double front cup holder, A-pillar grab handles, rear doors without glazing (270-degree opening angle), Intelligent LED Light System, terminal strip for electrical connections (driver seat box), comfort lighting in passenger/cargo area, enlarged fuel tank, LED cargo area lighting, continuous solid bulkhead with sliding window, bulkhead with window, mechanically adjustable steering column, multifunction steering wheel incl. trip computer, center console with storage compartment, driver’s seat with lumbar support, special paint, cut-off relay for additional battery, rear tinted glazing / privacy glass, 92 Ah AGM battery, front two-way speakers Further equipment: Guedpfx Amjy Ttdierjc Third brake light, adaptive brake light, passenger airbag, driver airbag, hill start assist, aspherical exterior mirrors (both sides), outside temperature display, roof rack mounting rails, TPO passenger area flooring, brake assist, ABS+ASR braking system, driver assistance system: Attention Assist (fatigue detection), driver assistance system: Crosswind Assist, windshield with built-in antenna, 150 A alternator, rear cup holder, front cup holder, seatbelt tensioners, passenger grab handle, lockable glove compartment, body/construction: standard van, body/construction: compact, load securing/tie-down eyes, engine 2.1 L – 120 kW CDI CAT, rear fog light, 3,200 mm wheelbase, interior mirror, low emission to Euro 6 standard, right side sliding door (cargo/passenger area), seatbelt warning system (driver/passenger), seat upholstery: fabric, window pillar trim, hardboard half-height trim in cargo/passenger compartment, lashing rails in cargo area – sidewall at roof frame, maintenance indicator

Stanje: rabljeno, največja dovoljena obremenitev: 7.618 kg, skupna masa: 9.990 kg, konfiguracija osi: 2 osi, prva registracija: 11/2020, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.000 mm, višina nakladalnega prostora: 250 mm, skupna širina: 2.550 mm, skupna višina: 3.020 mm, Humbauer tandem prikolica z 2 osmi in rampami Tip: HS 105020 BS Nosilnost: 7618 kg Material: aluminij Zavora: boben Os: SMB 3x podporna točka 2x rampi (dolžina: 2,30 m in širina: 0,45 m) Dolžina: 5,00 m Širina: 2,00 m Višina: 0,25 m Z veseljem vam pomagamo tudi pri financiranju/leasingu z našimi partnerji. Vsi podatki so brez garancije. Pridržujemo si pravico do napak in vmesne prodaje. Gedsy Unvcjpfx Amreuc

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.380 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * PT 30 Profile: ----Braking System: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering function as well as Return-to-Ride (RtR) valve ----Drawbar: Drawbar, 1,200 mm long with 40 mm draw eye and height adjustment via tension spring & turnbuckle ----Electrics / Lighting: * Smart Board mounted on the trailer as an information tool (for axle load display – front and rear separately) * Tire pressure monitoring system with display possibility in the truck via EBS signal, no installation required on the truck side * 15-pin power connector * LED lighting 12/24 V * LED beacon (removable) at the rear ----General Attachments: * Side underride protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle (FA) plastic quarter mudguards with spray protection * Rear axle (RA) straight galvanized steel mudguards with spray protection * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm, powder-coated black, mounted right side * Box in rotating frame for accessories, with folding lid, 2 pcs. container locks permanently fitted (directly after the rotating frame platform) * 2 galvanized steps on the rotating frame, left and right ----Low-loader Platform: * ROBOT-welded anti-slip covering to the steel plate of the rotating frame platform (protruding weld beads) ----Load Securing (Load Securing Package consists of): * 2 lashing eyes (13.4 t) front left & right at the front wall crossmember * 1 pair of UVV lashing rings (13.4 t) at the front & rear, and 3 pairs UVV lashing rings (10 t) each side, pivotable and lowerable, loadable in all directions and recessed in the outer frame * 3 stake pockets each side with simultaneous 2 t lashing capability * Profifix lashing rail lengthwise in the center axis, in the flat area, for lashing up to LC 3000 daN ----Widening: * 6 pairs of mechanical folding outriggers for 3 m total width (not on rear slope) * Widening planks stored in the middle of the loading area ----Ramps: * Hydraulic one-piece drive-on ramps approx. 3,000 x 720 mm * Mechanically adjustable sideways * 4-way control block for future retrofitting of hydraulic ramp shifting ----Excavator Arm Rest: * Excavator arm rest over rear axle, continuous up to the end crossmember (total length approx. 2,100 mm) * 2 pairs of lashing eyes LC 6400 daN in the excavator arm rest, positioned laterally in the longitudinal frame ----Loading Height: * Loaded approx. 910 mm +/- 20 mm air suspension ----Coating/Paintwork: * Chassis, rotating frame, folding outriggers, fall supports, and drive-on ramps hot-dip galvanized * Axles, slewing ring, air tanks, drawbar painted in a black tone ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted Gjdpfx Amotplwisrsuc ----Delivery Time: * Immediately available ex Egestorf