Stas Sa339K 58M3 Liftas Klep/Deuren! Mb Schijfremmen... nakup rabljenega (8.858)

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 09/2008, dolžina tovornega prostora: 9.700 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 2.165 mm, prostornina tovornega prostora: 50 m³, Chassis ALU chassis, aluminum alloy 5383H34 Two fully automatically welded T profiles (width 200 mm) Corrosion protection between steel and aluminum parts, continuous rubber bonded under pressure to the longitudinal beams, maximum stability with integrated tipping bearing shaft fitted with wear-resistant special bushings, chassis width approx. 1,600 mm, air and electrical lines integrated inside a plastic tube. Axles and Suspension Disc Brakes Jost disc axle assemblies 3 x 9 tonnes with DCA air suspension system, raising and lowering valve, load pressure gauge, third axle automatically liftable. Redpfx Aexf Spfjn Ejt Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5, approx. 50-60% tread remaining, on silver steel rims, size 11.75x22.5 ET 120. Landing Legs Mechanical landing gears, load capacity 2 x 20 tonnes, with pivoting feet for use with air suspension systems. Brake System According to E.G. standard, dual-circuit Wabco system, spring-loaded parking brake acting on two axles, Wabco EBS-E system 2S/2M with RSS (Roll Stability Support), ALU air reservoir. Electrical System According to StVZO regulations with 2 five-chamber Aspöck LED taillights, 24-volt system with two 7-pin and one 15-pin front sockets, EBS socket, side LED outline markers, 2 clearance lights, 2 separate LED reversing lights. Tipping Body/Tipper Body Aluminum tipper body, side walls with welded vertical aluminum profiles, approx. 6 mm floor of highly wear-resistant aluminum alloy (5383H34), Brinell HB 110, sloping front wall of 4 mm aluminum with reinforcing profiles for tipping cylinder bracket, side walls 3 mm hard alloy, straight rear wall, automatic pneumatic (lockable) universal tailgate with pendulum and wing door (2/3-1/3 split), with double hinge, made of 4 mm aluminum, single grain discharge slide with water protection, wear plates on the side approx. 400-1,000mm x 3,000mm x 4mm. Hydraulic System Hydraulic cylinder mounted on front wall, operating pressure 150 bar, manufacturer Edbro, approx. 2m hydraulic hose and loose half 1". Accessories 6 Parlok plastic mudguards with 2 Stas mudflaps, 3 m aluminum ladder, reinforced collapsible underrun protection with 2 towing eyes, one foldable side guard, walkway on bulkhead with left-hand access ladder, 3 ALU bows with swing function, one central additional bow holder, roll tarp with central ALU tube, roll tarp system, tarp material quality approx. 660g/m², tarp fastener with quick-release catch (no tension straps), wheel wrench, 2x wheel chocks, toolbox type 800, continuous spray guard fitted on underrun protection, etc. Offer and pictures non-binding.

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 09/2017, dolžina tovornega prostora: 10.550 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 1.900 mm, prostornina tovornega prostora: 50 m³, Chassis light version In aluminium (15-6-12) Two fully automatically welded I-beam longitudinal members with welded cross members. Chassis width approx. 1,600 mm Axles and Suspension, Disc brakes 430 mm “off-road version” SAF-Intradisc axle units 3 x 9 t with SAF air suspension, airbags centrally positioned to chassis longitudinal beam, 1st axle liftable with start-up aid and manual forced lowering, Smart Board Infocenter, raise/lower valve, 3rd axle with trailing steering, electrically lockable. Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5, approx. 40-50% tread, with Alcoa "satin" aluminium rims 11.75 x 22.5 ET 120, UNI wheel bolts for aluminium rims. Landing Legs Mechanical version, single-side operation with two speeds, swing foot for air suspension, 2x20t support load. Braking System According to EU standard, two-line Wabco system, spring-loaded parking brake acting on two axles and Wabco EBS-E incl. RSS (Roll-Stability-System), Wabco Smartboard Infocenter, aluminium air reservoir system. Electrical System According to German Road Traffic Licensing Regulations (StVZO), with two five-chamber lamps type Aspöck Ecopoint 2, 24V system with 2x7 and 1x15-pin socket, with side marker lights, 2 separate LED reversing lights at the rear. All air and electrical lines are neatly routed in plastic conduit. Tipping Body / Tipper Body, Inside Fully Welded Aluminium tipper body, sidewalls 30 mm thick plank profiles (2-3 mm), 600 mm wide, fully welded. Floor 8 mm wear-resistant alloy (5383H34/HB 110), front wall 4 mm reinforced, straight; rear wall double-leaf door, straight, with two doors in 1/2-1/2 design, each with a grain chute. Air vibrators under the floor with pneumatic operation, rear spreader made from aluminium, pivoting, two hold-down devices with rubber buffers on the tipper body fixed to the front wall frame. Hydraulic System, Tipping Cylinder with “Cardan” Suspension, 7,630 mm lift Hydraulic cylinder mounted on front wall, working pressure 220 bar, brand Hyva, 220 bar, approx. 2.5 m hydraulic hose and loose 1" half coupling, tipping angle approx. 48 degrees. Accessories 6 Parlok mudguards, full-width spray flaps on underrun bar, ALU spare wheel holder, foldable right side underrun protection, large tool box type 860, approx. 3 m aluminium ladder, 3 aluminium swinging bows, raised approx. 150 mm in centre, tarpaulin with central light strip and separate reinforcement in wear areas, approx. 660 g/m2 quality, with rolling tarpaulin system, circumferential rubber cord at rear closure with two tension hooks to be fixed to rear swing bow, walkway at tipper body with access on left, side tarpaulin closure with tension straps, rear tarpaulin closure with welded-in rubber cord for water protection, robust foldable aluminium underrun protection with two towing eyes left & right incl. locking pins, 2 “Clear-Pass” mud flaps on wheel arch to EU standard, etc. Offer and photos subject to change. Redpsxf Sn Isfx An Ejt

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 09/2021, dolžina tovornega prostora: 9.700 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.200 mm, prostornina tovornega prostora: 53 m³, Chassis, Light Version Made of aluminum (15-6-12) Two fully automatically welded I-section longitudinal beams with welded cross members. Chassis width 1,600 mm. Axles and Suspension Disc brakes 430 mm, "off-road version" SAF Intradisc light axle assemblies, 3 x 9 t with SAF air suspension, centrally mounted to the chassis longitudinal beam, 1st axle with liftable air bellows, starting aid function and manual forced lowering, Smart Board info center, lowering valve, front load pressure gauge. Tyres and Wheels on Aluminum Rims 6 wheels with tires 385/65 R 22.5 approx. 50%, 11.75 x 22.5 ET 120, UNI wheel bolts for aluminum rims. Kingpin 2" screwed into an 8 mm thick "light" plate Landing Legs Support winches, loadable to 2x20 t, with swiveling base for air suspension Rodpfx Ajyiw T Esn Est Brake System Built according to E.G. standards, dual-line Wabco system, spring-actuated parking brake affecting two axles, Wabco EBS-E with RSS (roll stability system), Wabco Smartboard Info Center, aluminum air tank system. Electrical System According to STVZO guidelines, with 3 round three-chamber lamps type Aspöck, 24V system with 2 x 7-pin and 1 x 5-pin sockets, 2 x 7 side outline markers, 2 LED reversing lamps centrally at the rear, 1 round fog lamp, 4 LED work lamps, 1 interior LED lamp, 4 red LED position lamps in the door bar. All air and electrical lines are neatly routed in plastic tubing! Tipper Body / Body “Smooth Design”, Body Interior Fully Welded Aluminum tipper body, side walls made from 30 mm thick plank profiles (2-3 mm), 600 mm wide, welded. Floor 8 mm high-wear-resistant alloy (5383H34/HB 110) with 90-degree profile to the side wall. Front wall 4 mm reinforced, straight design. Tailgate as universal door, straight version, with two half-and-half swing doors and grain chute. Universal door operated automatically-pneumatically, lockable via separate lever, rear portal in aluminum, swing-away, two hold-downs with rubber buffers on the tipper body, fixed to the front wall. Hydraulics, Tipping Cylinder with “Sleeve” Suspension Hydraulic cylinder mounted on the front wall, working pressure 150 bar, Edbro make, with approx. 2.5 m hydraulic hose and quick coupling 1", tipping angle approx. 48 degrees. Accessories 6 Parlok mudguards, complete splash flaps across full vehicle width mounted on underrun protection, no aluminum spare wheel holder, side underrun protection right, foldable version, large toolbox type 860, approx. 3 m aluminum ladder, 3 aluminum swing bars mid, approx. 150 mm raised with additional middle support, roll tarp with central light strip and separate reinforcements in wear areas, approx. 660 g/m² quality, roll tarp system with fast tension closure, surrounding rubber cord at rear edge of tarp with two catch hooks to be fixed on the rear swing bar, catwalk on frame, tarp closure at rear with welded-in rubber cord for water ingress protection, robust foldable underrun protection, 2 "Clear-Pass" mud flaps to EG standard mounted on mudguards, side-mounted on the frame an aluminum grain funnel with drawstring bag, brackets for shovel, broom, and scraper mounted over axles, etc… Unladen weight: 5,950 kg Offer and images subject to change.

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 06/2013, dolžina tovornega prostora: 9.700 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 1.900 mm, prostornina tovornega prostora: 46 m³, Chassis light version In aluminium (15-6-12) Two fully automatically welded I-beam longitudinal members with welded cross members. Chassis width: 1,600 mm Axles and suspension Disc brakes 430 mm "off-road version" SAF-Intradisc light axle assemblies 3 x 9 t with SAF air suspension, central-positioned air bellows on chassis longitudinal member, 3rd axle liftable with starting aid and manual forced lowering, Smart Board info center, lift-lower valve, BVA brake wear indicator Tyres and wheels 6 wheels with tyres size 385/65 R 22.5 approx. 60-70 % remaining tread, with silver steel rims, 11.75x22.5 ET 120, UNI wheel bolts King pin Rjdsyiw T Sspfx An Eot 2" – screwed into an 8 mm thick plate Landing gear Mechanical landing legs with 2 speeds, 2x20t support load, with swing foot for air suspension, Brake system According to E.E.C. standard, two-line system Wabco, spring-loaded parking brake acting on two axles and Wabco EBS-E incl. RSS (Roll-stability-system), Wabco Smartboard Info Center, aluminium air reservoir system Electrical system According to German Road Traffic Licensing Regulations (StVZO) with 2 five-chamber lights type Aspöck, 24-volt system with 2x7 and 1x15-pin socket, with side marker lights, 2 separate halogen reversing lights, all air and electrical lines neatly routed in plastic conduits Tipper body/smooth body design, interior fully welded Aluminium tipper body, side walls 30 mm thick plank profiles (2-3 mm), 600 mm wide, welded. Floor 6 mm thick high-wear-resistant alloy (5383H34/HB 110), with 45-degree angled profile to side wall. Front wall 4 mm, reinforced, angled design. Rear wall as universal door in straight design, with two-leaf doors (2/3-1/3 split) and one grain slide, ALU round profile welded to seal the door gap on the rear doors, side and bottom. Rear doors partly covered with smooth aluminium sheeting. Universal door operation is automatic-pneumatic with separate lever lock, rear swing bar in aluminium, two hold-downs with rubber buffer fixed to the tipper body at the bulkhead. Hydraulic system Tipping cylinder with "Rotulen"-mounting (light) Hydraulic cylinder mounted at the front wall with 150 bar working pressure, brand Edbro, approx. 2.5 m hydraulic hose and loose half 1", tipping angle approx. 48 degrees Accessories 6 Parlok mudguards, complete spray flaps across the entire vehicle width fixed to underrun protection, no spare wheel holder (aluminium), foldable side underrun guard (right), large tool box type 860, approx. 3 m aluminium ladder, 3 aluminium swing bows approx. 150 mm raised in the centre, an additional centrally mounted bow holder for positioning in total 2 bows to increase loading width, rolling tarpaulin with central light strip and separate reinforcements in wear areas, 660 g/m2 quality with rolling tarp system, all-around elastic rope on rear closure of tarpaulin with two hooks fixed to the swing bow at rear, catwalk on chassis in chassis colour with steps left and right, side tarp closure with quick lock, rear tarp closure with welded elastic rope for water resistance, robust foldable underrun guard in aluminium, 2 "Clear Pass" mud flaps at mudguard to EC standard, side-mounted on frame one aluminium grain funnel with sack, brackets for shovel, broom and scraper mounted above axles, etc. Curb weight: 5,960 kg Offer and images non-binding

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.650 mm, prostornina tovornega prostora: 93 m³, Chassis Design with reinforced continuous chassis, newly constructed bodywork in a self-supporting design with corresponding reinforcements in the lower belt for particularly high stability and strength. Cross members: reinforced version, 140 mm high (for heavy ground loads). Additional reinforcement as gusset plates in the front lower belt/vehicle frame area. Chassis made of galvanized steel up to the support structure (trailer design max. 39,000 kg). Axles and Suspension: 'Disc brake 22.5' Jost (DCA) axle units, 3x9 tons with DCA air suspension, lift and lower function, Wabco Smartboard info center, electronic brake wear indicator (BVA readable on the tractor unit display), 1st axle with traction aid (new EU regulation, without tractor unit equipment), (optionally 1st + 3rd axle can be liftable). Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 from selected manufacturers (Br-Go-Co) on silver steel rims, 11.75 x 22.5 ET 120. Landing Legs Mechanical landing legs with two speeds, 2x 20 t support load with swiveling foot. Braking System In accordance with EC standard – EBS electronic system by Wabco with RSS (Roll Stability Support) and premium modulator. Spring-loaded brake system acting on two axles with control at the rear. ALU air-tank system. Electrical System According to EC directives 91/633 and 97/28 with two Aspöck Europoint 3 five-chamber lamps integrated into the ALU rear closure, 24V system with 1x 15-pin and 2x 7-pin sockets, LED side marker lamps, two reflective plates on the rear, position lights front 2x white, rear 2x red, two separate LED reverse lights integrated into underrun protection. Body/Tipping Body – Fully Welded Inner Structure Reinforced side walls: front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn. Aluminium tipping body: side walls 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with lower and upper belts. Plank profiles inside fully welded. Floor with moving floor system laid on 140 mm ALU cross-members. Floor load capacity approx. 9 t/m2, cross-members closely spaced (approx. 350 mm). ALU front wall with 600 mm plank profile, 2-3mm thick, straight design. Special ALU corner profiles in chamfered design. Smooth rear wall in straight version with two ALU swing doors, 50/30 mm thick, with 2 bar locks mounted in welded ALU rear frame, with Teflon and stainless steel bearings. Doors secured when opened with one chain each side. Hard-wearing wear plates on side walls approx. 2,000x1,500x4 mm, fully welded. Residual discharge wall with Kevlar tarpaulin approx. 1,800 mm length plus side Kevlar seal. Service door in front wall with inward-turning ladder. Hydraulic System “Cargo Floor” Moving Floor System Moving floor system in the floor with hydraulically operated ALU profiles on ALU box beams, approx. 880 PE-HD slides plus anti-lifting slide bearings. Type CF, 10 mm floor version, hydraulics with approx. 200 mm stroke. Fixed halves at the front wall, separate option for connecting hydraulic line under the vehicle with fixed halves, pipe size NW 21, fixed halves with size and type to be specified. Operating pressure 190–max. 240 bar, ALU end pieces welded into the moving floor. Electric operation on the rear left with radio control integrated into a lockable, waterproof box, without hydraulic hoses. Redoyh S Aijpfx An Eot Accessories 6 PVC mudguards with 2 anti-spray mud flaps, 6 PVC splash guards above the wheels, 1 ALU spare wheel holder, side ALU underrun protection.

Stanje: novo, največja dovoljena obremenitev: 28.320 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.750 mm, prostornina tovornega prostora: 92 m³, Oprema: ABS, Chassis: Design with continuous frame, newly manufactured in self-supporting aluminum construction with appropriate reinforcements in the lower flange for particularly high stability and strength, crossmembers with a height of 140 mm in reinforced design (for high ground load), additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure. Axles and Suspension: Disc brakes 22.5, Jost (DCA) axle assemblies, 3x9 ton capacity with DCA air suspension, raise/lower function, Wabco Smartboard Info Center, electronic brake wear indicator (BVA, can be read out in the tractor unit display), first axle with start-assist function (new EC regulation, without tractor unit equipment), (first and third axle liftable on request at extra cost). Tyres and Wheels: 6 wheels with tires size 385/65 R 22.5 of manufacturer’s choice (Br-Go-Co) on silver-painted steel rims, 11.75x22.5 ET 120. Kingpin: 2-inch, bolted into a 10 mm thick mounting plate. Landing Gear: Mechanical landing legs with two speeds, 2x 20-ton support capacity with swivel foot. Rjdpjfi Nmwjfx An Est Brake System: According to E.C. regulations, EBS electronic braking system by Wabco with RSS (Roll Stability Support) and premium modulator, spring-type parking brake on two axles operated from the rear, ALU air reservoir system. Electrical System: In accordance with EC Directive 91/633 and 97/28, with 2 five-chamber lamps (Aspöck Europoint) integrated into the ALU rear end, 24-volt system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 reflective warning plates at the rear, position lights at the front (2x white), rear (2x red), 2 separate halogen reversing lights integrated into underrun protection. Body/Tipper Body: Fully welded interior, reinforced side walls, front wall load 17,250 daN, side and rear walls 13,400/10,400 daN. Aluminum tipper body, side walls made from 30 mm thick aluminum plank profiles (2–3 mm), 600 mm wide, completely welded with lower and upper flange, inside profile joints fully welded; floor as walking floor system laid on 140 mm aluminum crossmembers, floor forklift load approx. 9t/m², crossmembers spaced closely (approx. 350 mm), special angled aluminum corner profiles, flat straight rear wall with 2 aluminum swing doors (50/30 mm thick) with 2 locking rods, fixed into the welded ALU rear frame with Teflon and stainless steel bearings; doors secured when open by a chain at each side; hard wear plates welded to side walls, approx. 2000x1500x4 mm; moving residual discharge wall with Kevlar tarp approx. 1800 mm long plus lateral brushes and Kevlar side-sealing; service door in front wall with interior-folding ladder. Hydraulic System: Walking floor system in the floor with hydraulically operated ALU profiles on ALU square sections with approx. 880 PE-HD gliders plus anti-lifting slide bearings, Type CF 10 mm floor design, hydraulics with approx. 200 mm working stroke, fixed halves at the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and type to be specified, operating pressure 190–max. 240 bar, ALU end caps welded into walking floor, electric controls on left rear with remote control in a lockable waterproof box, hydraulic hoses not included. Accessories: 6 PVC mudguards with 2 antispray mud flaps, 6 PVC splash guards above the wheels, 1 ALU spare wheel holder, side ALU underrun protection

Stanje: rabljeno, konfiguracija osi: 3 osi, Leto izdelave: 2000, Stas S 3SA 334K Leto izdelave: 2000 3-osni Zračno vzmetenje Ponjava 2 x podporni nogi Lastna teža: 5.260 kg Rsdpfx Anjydb R Ro Ejt Največja dovoljena masa: 38.000 kg = Dodatne informacije = Prazna teža: 5.260 kg

Stanje: rabljeno, konfiguracija osi: 3 osi, barva: siv, Leto izdelave: 2000, Stas S 3SA 334K Letnik: 2000 3-osni Zračno vzmetenje Ponjava 2 nosilca Lastna teža: 5.260 kg Skupna dovoljena masa: 38.000 kg = Dodatne informacije = Rodpfxsyda Tdj An Eet Lastna masa: 5.260 kg Nosilnost: 32.740 kg Skupna dovoljena masa: 38.000 kg

Stanje: rabljeno, konfiguracija osi: 3 osi, Leto izdelave: 2001, Stas S3 SA334K Letnik izdelave: 2001 3 osi Zračno vzmetenje Ponjava Redsyda E Hepfx An Ejt 2 x podpori Lastna teža: 5.260 kg Dovoljena skupna masa: 39.000 kg = Dodatne informacije = Prazna masa: 5.260 kg Nosilnost: 33.740 kg Skupna dovoljena masa: 39.000 kg

Stanje: rabljeno, konfiguracija osi: 3 osi, barva: siv, Leto izdelave: 2008, Oprema: ABS, Stas S 339 CX Letnik izdelave: 2008 Zračno vzmetenje 3-osni Ponjava 2 x podporni nogi Polkrožni prekucnik = Dodatne informacije = Redpfx Aeydavxsn Eet Lastna teža: 6.800 kg Nosilnost: 32.200 kg Dovoljena skupna masa: 39.000 kg

Stanje: rabljeno, konfiguracija osi: 3 osi, Leto izdelave: 2015, Oprema: ABS, Stas S3 SA334K Letnik izdelave: 2001 3 osi Zračno vzmetenje Ponjava 2 x podpori Lastna teža: 5.260 kg Dovoljena skupna masa: 39.000 kg Rsdpfxeydargo An Eot = Dodatne informacije = Prazna masa: 5.260 kg Nosilnost: 33.740 kg Skupna dovoljena masa: 39.000 kg

Stanje: rabljeno, konfiguracija osi: 3 osi, Leto izdelave: 2008, Stas S 339 CX Redpfxjyc U Uas An Ejt Letnik: 2008 3-osni Zračno vzmetenje Ponjava 2 x opori Lastna teža: 4.890 kg Največja dovoljena masa: 39.000 kg = Dodatne informacije = Lastna teža: 4.890 kg Nosilnost: 34.110 kg Skupna dovoljena masa: 39.000 kg

Stanje: rabljeno, lastna masa: 7.910 kg, največja dovoljena obremenitev: 31.090 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2018, vzmetenje: zrak, velikost pnevmatike: 385/65 22,5, stanje pnevmatik: 40 odstotek, barva: srebrn, Leto izdelave: 2018, velikost sprednje pnevmatike: 385/65 22,5, velikost zadnje pnevmatike: 385/65 22,5, voznikova kabina: dnevna kabina, emisijski razred: noben, Oprema: ABS, registracija tovornjaka, Reference number for inquiries: 40573 Stas, S 300CX * Year of manufacture: 2018 * ABS, Anti-lock Braking System * Air suspension * Lift axle * Air line coupling head (red + yellow) * 15-pin connector plug * Lifting and lowering device * Storage/toolbox * Aluminium tipping body * Platform * Sliding tarpaulin * Grain outlet slider * Suspension: Air * Gross vehicle weight: 39,000 kg * Unladen weight: 7,910 kg * Payload: 31,090 kg * Permissible gross weight: 39,000 kg * Tire condition 1st axle: 40% -- 40% - Tire size: 385/65 R22.5 * Tire condition 2nd axle: 40% -- 40% - Tire size: 385/65 R22.5 * Tire condition 3rd axle: 50% -- 50% - Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 * Wabco SmartBoard * Rear support * Wear plates left and right * Folding underrun protection Disclaimer: Subject to change, prior sale, and errors excepted. More photos and videos can be found on our website. Our comprehensive service includes e.g.: * Purchase / sale / rental of commercial vehicles * Quick, hassle-free financing Rsdpfx Aeyicqyen Eet * Processing all (export) documents * Ordering of export / customs number plates * Vehicle preparation: New tarpaulins, decals, painting, etc. * Professional loading / load securing * TÜV approvals, registration service * Transfer and delivery of commercial vehicles Consult our trained specialists – we are happy to advise you.

Stanje: rabljeno, največja dovoljena obremenitev: 28.150 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2019, prostornina tovornega prostora: 92 m³, Leto izdelave: 2019, Oprema: ABS, * Stas 3-axle Walking Floor S300ZX Rjdpfjw H Hprsx An Eot * 10 mm floor * approx. 92 m³ * Radio remote control * Roll tarp * Air suspension * 2x lift axles * Disc brakes * JOST axles * EBS * ABS

Stanje: rabljeno, največja dovoljena obremenitev: 32.550 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2016, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 1.500 mm, prostornina tovornega prostora: 30 m³, skupna širina: 2.550 mm, skupna višina: 3.350 mm, Oprema: ABS, Stas S300CX Prva registracija: 25-08-2016 Rjdpfxoyf Sf Ue An Eet Aluminijasto šasijo / Jeklena keson SAF osi s kolutnimi zavorami, ABS in EBS Zračno vzmetenje Smartboard Serijska številka: YE6S300CXG0001112 Pnevmatike: 385/65 R22,5 35% Skupna masa: 39.000 kg, Lastna masa: 6.450 kg, Nosilnost: 32.550 kg Preklopna zaščita proti podletu Kesa: D-8,50 m, Š-2,35 m, V-1,50 m = 30 m3 Izdelano za ADR homologacijo Pridržujemo si pravico do napak/napisnih napak in vmesne prodaje.

Stanje: rabljeno, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2019, * Dvižna os * ALU platišča * JOST osi * Pomikajoča cerada * Lastna teža: 7.760 kg -----Interna številka vozila: 10296----Pridržujemo si pravico do napak in vmesne prodaje Podpora preko WhatsAppa na voljo! Redpfx Anow Rit To Eot Za vprašanja o vozilu ali dodatne informacije nam pišite preko WhatsAppa.

Stanje: rabljeno, največja dovoljena obremenitev: 33.370 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2014, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 1.500 mm, prostornina tovornega prostora: 30 m³, skupna širina: 2.550 mm, skupna višina: 3.160 mm, Oprema: ABS, Stas S300CX izolirani asfaltni kiper Rodpfx Anex Txmie Est Prva registracija MB osi z disk zavorami, ABS in EBS Zračno vzmetenje Smartboard Serijska številka: YE6S300CXD0001049 Pnevmatike: 385/65 R22,5 35% Skupna teža: 39.000 kg, lastna teža: 5.630 kg, nosilnost: 33.370 kg Delovni podest Ročna ponjava 3x žitna zaporna loputa Poklopna zaščita proti podletu Box: D-8,50 m, Š-2,35 m, V-1,50 m = 30 m3 Izdelano za ADR homologacijo Pridržujemo si pravico do napak/tipkarskih napak in vmesne prodaje.

Stanje: rabljeno, lastna masa: 11.245 kg, skupna masa: 36.000 kg, Leto izdelave: 2009, Oprema: ABS, STAS/ALU/TIPPER Year of manufacture: 10/2009 2 axles Gross weight: 36,000 kg Rsdpfovdrt Ssx An Eot Unladen weight: 11,245 kg ABS

Stanje: novo, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 1.900 mm, prostornina tovornega prostora: 56 m³, Oprema: ABS, Chassis – Lightweight Version Made from aluminium (15-6-12) Two fully automated welded I-beam longitudinal members with welded cross members. Chassis width: 1,600 mm Rjdpjfi Nmuofx An Est Axles and Suspension - 430 mm disc brakes - Jost (ex Mercedes DCA) axle assemblies, 3 x 9 t with air suspension, air bellows centrally positioned on the chassis longitudinal member - 1st axle liftable with start-up aid and manual forced lowering - Smart Board Info Center - Raise/lower valve - BVA brake wear indicator Tyres and Wheels - 6 wheels with 385/65 R22.5 tyres from selected manufacturers, steel rims 11.75 x 22.5 ET 120 Landing Gear - Mechanical version with single-sided operation, 2-speed gearbox, swiveling foot for air suspension Brake System - According to E.G. standard, two-line Wabco system, spring-loaded parking brake on two axles, and Wabco EBS-E including RSS (Roll Stability System) and Premium Modulator, Wabco Smartboard Info Center, aluminium air reservoir system Electrical System - According to German Road Traffic Licensing Regulations (StVZO), with 2 five-chamber Aspöck Ecopoint 2 lights, 24V system with 2 x 7- and 1 x 5-pin sockets, side marker lights, 2 separate LED reversing lights at the rear, 1 LED interior light Tipping Body / Body Construction (fully welded interior) - Aluminium tipper body - Sidewalls: 30 mm thick plank profiles (2–3 mm), welded 600 mm wide - Floor: 8 mm high-wear resistant alloy (5383H34/HB 110) - Front wall: 4 mm reinforced, straight version - Rear wall: Universal door, straight version with 2 wing doors in 2/3-1/3 division with one grain chute, or optional in 1/2-1/2 version with one grain chute per door - Aluminium round profile sealing at rear doors (side and bottom) - Rear doors partially smooth aluminium-plated - Universal door operation: pneumatically automatic with separate lever lock - Aluminium swing-out rear canopy - 2 hold-down devices with rubber buffers on tipping body frame at the front wall Hydraulic System – Tipping Cylinder with Large Housing - Hydraulic cylinder mounted on the front wall, max. working pressure 150 bar, manufacturer Edbro - Approx. 2.5 m hydraulic hose and 1" loose half coupling - Tipping angle approx. 48° Accessories - 6 Parlok mudguards - Complete splash apron covering the entire vehicle width mounted to the underrun protection - Aluminium spare wheel holder - Right-side foldable side underrun guard - Large toolbox type 860 - Approx. 3 m aluminium ladder - 3 aluminium pivoting bows approx. 150 mm raised in the middle - Additional centrally mounted bow bracket for a total of 2 bows to increase loading width - Rolling tarpaulin with central light strip and separate reinforcements at wear points, approx. 660 g/m² quality, with roll tarp system, perimeter rubber cord at the rear closure of the tarp with two hooks to fix at rear pivoting bow - Walkway on chassis frame painted in chassis color - Tarpaulin quick release lock - Rear tarp closure with welded-in rubber seal for water ingress protection - Robust, foldable underrun protection with two towing eyes left and right incl. pin - 2 "Clear-Pass" splash guards on the fenders (EG standard) - Aluminium grain funnel with sack, mounted on the side of the frame - Holder for shovel, broom, and scraper above the axles +€590 delivery charge Available in 50 m³ – 56 m³ Loading compartment length: 9,700 mm and 10,500 mm * Price varies according to equipment configuration

Stanje: novo, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 1.900 mm, prostornina tovornega prostora: 40 m³, Oprema: ABS, Tipping semi-trailer, ALUMINIUM chassis, Jost axle assemblies 22.5" / off-road, 3 x 9-ton axles with air suspension, 1st axle lift with traction aid and electric operation, raise & lower valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with 385/65 R22.5 tires on STEEL rims, 2" king pin bolted into a 10mm plate, mechanical landing gear with single-side operation, braking system per EEC standard, Westinghouse two-line system, spring brakes on two axles and EBS electronic system Wabco with RSS (Roll Stability Support), aluminum air tanks, electrical system per StVZO with two Aspöck five-chamber lights, 24-volt system, aluminum tipper body, Edbro hydraulic system with approx. 2m hydraulic hose, 6 PVC mudguards with rubber mud flaps, lateral underrun protection, rear underrun protection, catwalk on the frame, fully welded, LL rubber seal, spindle locks on the tailgate, prepared for vibrating plate, mud-tight! ADDITIONAL EQUIPMENT AVAILABLE TO ORDER AS REQUESTED COLOR FREELY CHOOSABLE +590€ delivery costs Rodpfxsu Dvw Ej An Est *Pictures and offers non-binding*

Stanje: novo, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.750 mm, prostornina tovornega prostora: 92 m³, Oprema: ABS, - Panama sheet 900g - 10 mm floor - V-sheets 2000x1500x4 - Service door in the bulkhead - 12 pairs of lashing rings in the bulkhead Chassis: Reinforced continuous frame design, new body manufactured in self-supporting construction with corresponding reinforcements in the lower flange for exceptionally high stability and strength, crossmembers 140 mm high in reinforced version Axle and Suspension: Disc brakes 22.5"? Jost axle assemblies, 3 x 9 tons with DCA air suspension, lift and lower function, Wabco Smartboard, electronic brake pad wear indicator (BVA), 1st axle with traction aid (without tractor unit configuration) Rsdpfofi Nmpox An Eet Tyres and Wheels: 6 wheels with premium tyres size 385/65 R 22.5 on steel rims, 11.75 x 22.5 ET 120 Landing Gear: Mechanical landing legs, 2 x 20 t support load Brake System: Wabco EBS E-system with RSS (Roll Stability Support) and premium modulator, spring-actuated parking brake on two axles, operated from the rear Electrical System: In accordance with EU directive 91/633 and 97/28, with two five-chamber lights Aspöck Europoint type integrated in ALU rear, 24 Volt system with 1 x 15-pin and 2 x 7-pin sockets, with side marker lights (LED), 2 separate LED reversing lights integrated in underrun protection Body / Tipper Body: Fully welded interior, reinforced side walls. Aluminium tipper body, side walls 30 mm thick aluminium plank profiles (2–3 mm), 600 mm high, fully welded with top and bottom rails, plank profiles fully welded inside, alu bulkhead with 600 mm plank profile, 2–3 mm thick, straight design, with 2 ALU swing doors 50/30 mm thick, movable residual discharge partition with Kevlar sheet, approx. 1,500 mm long plus side Kevlar tarpaulin seal Hydraulics: 'Cargo Floor' moving floor system, hydraulically operated aluminium floor profiles laid on alu square profiles, with approx. 880 PE-HD sliders, type CF, 8 mm floor, fixed ends at bulkhead, separate option to connect hydraulic line under vehicle with fixed ends, operating pressure 190 – max. 240 bar, ALU end caps welded in moving floor, without hydraulic hoses Accessories: 6 PVC mudguards with 2 anti-spray flaps, 1 ALU E-wheel holder, side alu underrun protection, foldable, 1 tool box approx. 860 x 460 x 400 mm in plastic, 3.7m aluminium ladder, roll tarp approx. 660g/m² with roll tarpaulin system incl. roller bar, either with side tension belts or with quick fastener, catwalk on bulkhead with access ladder, 3 steel bows with swing-out and lockable latches, alu protective cover with hinges foldable for lights, etc. +€590 delivery costs Unladen weight: approx. 7,700 kg Offer and pictures subject to confirmation

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.500 mm, prostornina tovornega prostora: 87 m³, Chassis Manufactured as a self-supporting ALUMINIUM structure with appropriate reinforcements in the lower chord for particularly high stability and strength. Aggregated chassis made of ALUMINIUM, frame height 140 mm (max. 39 t), axles and suspension: disc brakes 22.5", Jost axle units 3 x 9 ton with DC air suspension, lifting and lowering function. Wabco Smartboard, electronic brake wear indicator (BVA) for display in the tractor unit (without tractor equipment). 1st and 3rd axles separately liftable with starting aid (without tractor equipment), 3rd axle additionally with Optiturn, ECAS air suspension. Tyres and wheels 6 wheels with 385/65 R 22.5 tyres, manufacturer’s choice, on Alcoa aluminium rims, satin finish, 11.75x22.5 ET 120 (with steel equivalent approx. 120 kg). Landing legs Aluminium drop-leg supports, manufacturer: Alu-Leg, 2 x 10 t support load, with swivelling feet for air suspension. Brake system According to E.E.C. standards, dual-circuit braking system, Wabco EBS E system with RSS (Roll Stability Support), spring-loaded parking brake acting on two axles with control at the rear, aluminium air tank system, premium modulator. Electrical system According to StVZO regulations with 2 Aspöck Europoint III five-chamber rear lights integrated into the ALU rear profile, 24 V system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 work lights at the rear, 2 LED work lights on the sides at the height of the landing legs, 1 LED work light inside front left, operable from the outside. Body/tipper body – "Body fully welded inside" Front wall load: 17,250 dkn. Rear and side walls: 10,250/13,400 dkn. Aluminium tipper body, side walls made from 30 mm thick ALU plank profiles (2–3 mm) 600 mm wide, fully welded to lower and upper chords, inside fully welded plank profiles! Floor built as moving floor system on 140 mm ALU cross members, forklift load approx. 7 t/m², closely spaced cross members (approx. 350 mm), ALU front wall with 600 mm plank profile 2–3 mm thick, straight design, special ALU corner profiles, bevelled design. Smooth tailgate in straight design with 2 ALU swing doors, 50/30 mm thick with 4 locking rods, welded in ALU rear frame, mounted with Teflon and stainless steel bearings, travelling ALU wall suspended in reinforced ALU top chord with "Kevlar tarp" for complete evacuation, lateral brush seal and additional Kevlar side tarp, integrated discharge funnel with folding cover plate at the rear left, accessible from outside, rear left viewing window, one sample shutter in each rear door (total 2 pieces), service door left in the front wall. Hydraulic system – "Cargo Floor" 24 board system – smooth finish! Moving floor system in the floor with hydraulically operated ALU profiles on ALU box sections with approx. 880 PE-HD skids, approx. 8 mm floor thickness, hydraulic stroke approx. 200 mm, rigid connections at the front wall, separate hydraulic line connection from under the vehicle with fixed halves, pipe size NW 21, fixed halves with specified size and design to be confirmed, operating pressure 190–max. 240 bar, aluminium end pieces welded into the floor, opening rear left with cable control in a lockable watertight box, without hydraulic hoses. Accessories PVC mudguards with rubber mudflaps, ALU spare wheel holder, foldable side ALU underrun protection, 1 tool box approx. 800x460x430 mm plastic, approx. 3.7 m Alu ladder, 680 g/m² tarpaulin with roller system including side quick release. Rjdpfx Anogcw Rij Est

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.880 mm, širina tovornega prostora: 2.460 mm, višina nakladalnega prostora: 2.165 mm, prostornina tovornega prostora: 47 m³, Oprema: ABS, Tipping semi-trailer, ALUMINIUM chassis, Jost axle assemblies 22.5" / off-road, 3 x 9-ton axles with air suspension, 1st axle with lift, traction aid, and electric operation, raising and lowering valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with 385/65 R22.5 tires on STEEL rims, 2" kingpin bolted into a 10 mm thick plate, mechanical landing gear with unilateral operation, braking system according to EEC standards, two-line system, spring actuators acting on two axles, EBS electronic brake system by Wabco with RSS (Roll Stability Support), aluminum air tanks, electrical system in accordance with StVZO regulations, 2 five-chamber tail lights (Aspöck type), 24-volt system, aluminum tipper body, Edbro brand hydraulics with approx. 2 m hydraulic hose, 6 PVC mudguards with rubber mud flaps, side underrun protection, rear underrun protection, catwalk on the frame, fully welded, continuous sealing rubber, spindle locks on the rear door; tipper body optionally also available with mud-tight seal! Rjdsu Dvw Sepfx An Ejt Combination tailgate, split 2/3-1/3, with grain chute and automatic pneumatic locking. FURTHER EQUIPMENT AVAILABLE ON REQUEST COLOR FREELY CHOICEABLE +€590 delivery costs Also available in versions Z9-Z13 *Images and offers subject to change*

Stanje: novo, največja dovoljena obremenitev: 28.840 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.660 mm, širina tovornega prostora: 2.250 mm, višina nakladalnega prostora: 2.350 mm, prostornina tovornega prostora: 50 m³, Oprema: ABS, STRONG & LIGHT, now also available for heavy-duty applications, from 40 m³ loading volume and 6,600 kg. High-quality aluminium chassis with high-strength steel body, ACTUAL 7,160 KG. Chassis with 3x 9t DCA axles, equipped with 430 mm disc brakes, 6x steel rims, 1st axle as a lift axle with starting aid, aluminium drop-down landing legs (can be decoupled when loaded), foldable underrun protection, digital load gauge for axle load indication, toolbox, access ladder. Body made from HB450 steel sheets, floor 5 mm thick, side walls and rear doors made from 4 mm HB450 steel sheets. Rear doors split 1/2 - 1/2 with a grain chute on the right, rear doors can be unlocked from the rear, doors sealed with round steel bar (optionally with rubber seal – mud-tight), roll tarp with central support tube, aluminium splash guard to protect the roof tarpaulin during loading, platform mounted on the frame, EdBro tipping cylinder with long casing, loading height = 3,650 mm. (The vehicles shown are partly equipped with special options) Further equipment details and a comprehensive vehicle quotation are available upon request. Various loading volumes, vehicle lengths, and heights are possible. Painting and equipment according to customer specifications. Rjdpfxshfiqce An Eot +€500 delivery charge Offers and images are subject to change.

Stanje: rabljeno, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2017, naslednji pregled (TÜV): 09/2026, dolžina tovornega prostora: 13.179 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 2.800 mm, Oprema: ABS, * Stas premična tla * Pokrivna ponjava * ALU platišča * SAF osi Redoxu Th Uspfx An Ejt * Lastna teža: 7790 kg * Leto izdelave: Interna številka vozila: 11498-----Pridržane so napake in vmesna prodaja