Sprehajalna tla

STAS 13.50 "WF 87 Farmstar"

Chassis
manufactured in self-supporting ALU construction with corresponding reinforcements in the lower chord for particularly high stability and strength? Aggregate chassis made of ALUMINIUM, 140 mm frame height (max. 39 tons), axles and suspension "disc brake 22, 5?, Jost axle units 3 x 9 tons with DC air suspension, lifting and lowering? Wabco Smartboard? electronic brake wear indicator (BVA) for display in the SZM (without SZM equipment)? 1st + 3rd axle separately liftable with starting aid (without SZM equipment), 3rd axle additionally with Optiturn, ECAS air suspension

Tires and wheels
6 wheels with tires size 385/65 R 22.5 according to manufacturer's choice on Alcoa satin aluminum rims, 11, 75x22.5 ET 120 (with steel rim + approx. 120 kg)

Seat posts
Alu-Leg, 2 ? 10 to drawbar load, for air suspension we use swivel feet

Brake system
according to E.E.G. standard, dual-circuit brake system, EBS E system Wabco with RSS system (Roll Stability Support), spring brake system acting on two axles with operation at the rear, aluminum air reservoir system, Premium Modulator

Electrical system
in accordance with the STVZO guidelines with 2 five-chamber Aspöck Europoint III lights integrated in the ALU rear end, 24 volt system with lx 15-pin and 2x 7-pin socket, with LED side marker lights
LED side marker lights, 2 work lights at the rear, 2 LED work lights on the side at the height of the seat posts, 1 LED work light inside front left operable from the outside

Body/body " Body fully welded on the inside "
Front wall load 17,250 dkn? Rear and side walls 10,250/13,400 dkn Aluminum body, side walls 30 mm thick ALU plank profiles (2-3 mm) 600 mm wide completely welded in with top and bottom chord, plank profiles fully welded inside! ! , floor as
Floor laid as a sliding floor system on 140 mm ALU cross beams, floor stacker load approx. 7 to/m2 Cross beams mounted correspondingly narrow (approx. 350 mm), ALU end wall with 600 mm thick plank profile 2-3 mm in straight design, special ALU corner profiles in beveled design
Smooth rear wall in straight design with 2 ALU hinged doors 50/30 mm thick with 4 espagnolettes Locks in welded ALU rear frame fixed in Teflon bearing and Inox bearing. ALU wall suspended in reinforced ALU upper belt with "Kevlar tarpaulin" for complete emptying, lateral brush sealing and additional Kevlar tarpaulin on the side, integrated discharge hopper with hinged cover plate in the floor end, can be operated from the outside at the rear left, viewing window at the rear left, 1 sample slider in each rear door, i.e. 2 pcs.
Otyqh
in each of the rear doors, i.e. 2 pcs. Service door on the left in the bulkhead

Hydraulic system "Cargo Floor" 24 board system - smooth design!
Moving floor system in the floor with hydraulically moved ALU profiles mounted on ALU square profiles with approx. 880 PE-HD glides, approx. 8 mm floor thickness, hydraulics with approx. 200 mm working stroke, fixed halves on the bulkhead, separate option for connecting the hydraulic line under the vehicle with fixed
hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the floor, rear left with cable operation in a lockable watertight box, without hydraulic hoses

Accessories
PVC mudguards with rubber mud flaps, ALU spare wheel holder, lateral ALU collision protection in hinged design, l tool box approx. 800x460x430 mm in plastic,

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.