Stas 13.50 "Wf 87 Farmstar" nakup rabljenega (6.735)

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.500 mm, prostornina tovornega prostora: 87 m³, Chassis Manufactured as a self-supporting ALUMINIUM structure with appropriate reinforcements in the lower chord for particularly high stability and strength. Aggregated chassis made of ALUMINIUM, frame height 140 mm (max. 39 t), axles and suspension: disc brakes 22.5", Jost axle units 3 x 9 ton with DC air suspension, lifting and lowering function. Wabco Smartboard, electronic brake wear indicator (BVA) for display in the tractor unit (without tractor equipment). 1st and 3rd axles separately liftable with starting aid (without tractor equipment), 3rd axle additionally with Optiturn, ECAS air suspension. Tyres and wheels 6 wheels with 385/65 R 22.5 tyres, manufacturer’s choice, on Alcoa aluminium rims, satin finish, 11.75x22.5 ET 120 (with steel equivalent approx. 120 kg). Landing legs Aluminium drop-leg supports, manufacturer: Alu-Leg, 2 x 10 t support load, with swivelling feet for air suspension. Brake system According to E.E.C. standards, dual-circuit braking system, Wabco EBS E system with RSS (Roll Stability Support), spring-loaded parking brake acting on two axles with control at the rear, aluminium air tank system, premium modulator. Electrical system According to StVZO regulations with 2 Aspöck Europoint III five-chamber rear lights integrated into the ALU rear profile, 24 V system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 work lights at the rear, 2 LED work lights on the sides at the height of the landing legs, 1 LED work light inside front left, operable from the outside. Body/tipper body – "Body fully welded inside" Isdpfxogcw Rio Ahksia Front wall load: 17,250 dkn. Rear and side walls: 10,250/13,400 dkn. Aluminium tipper body, side walls made from 30 mm thick ALU plank profiles (2–3 mm) 600 mm wide, fully welded to lower and upper chords, inside fully welded plank profiles! Floor built as moving floor system on 140 mm ALU cross members, forklift load approx. 7 t/m², closely spaced cross members (approx. 350 mm), ALU front wall with 600 mm plank profile 2–3 mm thick, straight design, special ALU corner profiles, bevelled design. Smooth tailgate in straight design with 2 ALU swing doors, 50/30 mm thick with 4 locking rods, welded in ALU rear frame, mounted with Teflon and stainless steel bearings, travelling ALU wall suspended in reinforced ALU top chord with "Kevlar tarp" for complete evacuation, lateral brush seal and additional Kevlar side tarp, integrated discharge funnel with folding cover plate at the rear left, accessible from outside, rear left viewing window, one sample shutter in each rear door (total 2 pieces), service door left in the front wall. Hydraulic system – "Cargo Floor" 24 board system – smooth finish! Moving floor system in the floor with hydraulically operated ALU profiles on ALU box sections with approx. 880 PE-HD skids, approx. 8 mm floor thickness, hydraulic stroke approx. 200 mm, rigid connections at the front wall, separate hydraulic line connection from under the vehicle with fixed halves, pipe size NW 21, fixed halves with specified size and design to be confirmed, operating pressure 190–max. 240 bar, aluminium end pieces welded into the floor, opening rear left with cable control in a lockable watertight box, without hydraulic hoses. Accessories PVC mudguards with rubber mudflaps, ALU spare wheel holder, foldable side ALU underrun protection, 1 tool box approx. 800x460x430 mm plastic, approx. 3.7 m Alu ladder, 680 g/m² tarpaulin with roller system including side quick release.

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.636 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.300 mm, prostornina tovornega prostora: 60 m³, Chassis manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower flange for particularly high stability and strength, aggregate chassis made of ALUMINUM, 140 mm frame height! (max. 39t) Axles and suspension: "Disc brake 22.5", Jost axle assemblies 3 x 9 tons with DC air suspension, lifting and lowering function, Wabco Smartboard, electronic brake wear indicator (BVA) for display in tractor unit (without tractor unit equipment), 1st and 3rd axles separately liftable with start assist (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension, Wabco Trailerpulse tire pressure monitoring system with ZF wheel-mounted sensors Tires and wheels: 6 wheels with 385/65 R 22.5 tires (manufacturer's choice), Alcoa aluminum rims DuraBright-11, 75x22.5 ET 120, kingpin screwed into a 10 mm thick plate Iodsfakkcepfx Ahkeia Landing legs: aluminum drop landing legs, 2 x 10t support load, aluminum pivoting feet used for air suspension Brake system: compliant with E.G. standards, two-line braking system, Wabco EBS electronic system with RSS (Roll Stability Support), spring-actuated braking system acting on two axles with control at the rear, aluminum air tank system, premium modulator Electrical system: compliant with StVZO, with 2 LED five-chamber Aspöck Europoint taillights integrated into aluminum rear, 24V system with 1x 5-pin and 2x 7-pin sockets, LED side marker lights, 2 separate LED work lamps at the rear, 2 LED work lamps at the height of the landing gear, 1 LED work lamp inside front left, operable from outside Superstructure / Body: "Interior fully welded" Front wall load 17,250 dN, rear and side walls 10,250/13,400 dN, aluminum tipper body, side walls made from 30 mm thick aluminum plank profiles (2-3 mm), 600 mm wide, fully welded with top and bottom rails, plank profiles inside fully welded, floor as moving floor system installed over 140 mm aluminum cross beams, floor load approx. 7 t/m², cross beams closely spaced (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles beveled, smooth straight rear wall with 2 aluminum swing doors 50/30 mm thick with 4 locking bars integrated into a welded aluminum rear frame mounted in Teflon and stainless steel bearings; following wall made of reinforced top aluminum rail with Kevlar curtain for complete emptying, side brush seal and additional Kevlar side curtain, integrated discharge chute with foldable closing plate at rear left, externally operable, inspection window rear left, 1 sampling gate per rear door (total 2), service door front left Hydraulic system: "Cargo Floor" moving floor system in the floor with hydraulically driven aluminum profiles on aluminum square tubes with approx. 670 PE-HD gliders, approx. 6 mm floor thickness, hydraulics with approx. 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and model to be specified, operating pressure 190–240 bar max., aluminum end pieces welded into the floor, electric controls at rear left with cable remote in a lockable waterproof box Accessories: PVC mudguards with rubber mud flaps, aluminum spare wheel holder, foldable aluminum side underrun protection, 1 tool box approx. 800x460x430 mm plastic, approx. 3.7 m aluminum ladder, roll tarp 680g/m² quality with roll tarpaulin system incl

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.650 mm, prostornina tovornega prostora: 93 m³, Chassis Design with reinforced continuous chassis, newly constructed bodywork in a self-supporting design with corresponding reinforcements in the lower belt for particularly high stability and strength. Cross members: reinforced version, 140 mm high (for heavy ground loads). Additional reinforcement as gusset plates in the front lower belt/vehicle frame area. Chassis made of galvanized steel up to the support structure (trailer design max. 39,000 kg). Axles and Suspension: 'Disc brake 22.5' Jost (DCA) axle units, 3x9 tons with DCA air suspension, lift and lower function, Wabco Smartboard info center, electronic brake wear indicator (BVA readable on the tractor unit display), 1st axle with traction aid (new EU regulation, without tractor unit equipment), (optionally 1st + 3rd axle can be liftable). Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 from selected manufacturers (Br-Go-Co) on silver steel rims, 11.75 x 22.5 ET 120. Landing Legs Mechanical landing legs with two speeds, 2x 20 t support load with swiveling foot. Braking System In accordance with EC standard – EBS electronic system by Wabco with RSS (Roll Stability Support) and premium modulator. Spring-loaded brake system acting on two axles with control at the rear. ALU air-tank system. Electrical System According to EC directives 91/633 and 97/28 with two Aspöck Europoint 3 five-chamber lamps integrated into the ALU rear closure, 24V system with 1x 15-pin and 2x 7-pin sockets, LED side marker lamps, two reflective plates on the rear, position lights front 2x white, rear 2x red, two separate LED reverse lights integrated into underrun protection. Iijdpfx Ahsyh S Aiokoa Body/Tipping Body – Fully Welded Inner Structure Reinforced side walls: front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn. Aluminium tipping body: side walls 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with lower and upper belts. Plank profiles inside fully welded. Floor with moving floor system laid on 140 mm ALU cross-members. Floor load capacity approx. 9 t/m2, cross-members closely spaced (approx. 350 mm). ALU front wall with 600 mm plank profile, 2-3mm thick, straight design. Special ALU corner profiles in chamfered design. Smooth rear wall in straight version with two ALU swing doors, 50/30 mm thick, with 2 bar locks mounted in welded ALU rear frame, with Teflon and stainless steel bearings. Doors secured when opened with one chain each side. Hard-wearing wear plates on side walls approx. 2,000x1,500x4 mm, fully welded. Residual discharge wall with Kevlar tarpaulin approx. 1,800 mm length plus side Kevlar seal. Service door in front wall with inward-turning ladder. Hydraulic System “Cargo Floor” Moving Floor System Moving floor system in the floor with hydraulically operated ALU profiles on ALU box beams, approx. 880 PE-HD slides plus anti-lifting slide bearings. Type CF, 10 mm floor version, hydraulics with approx. 200 mm stroke. Fixed halves at the front wall, separate option for connecting hydraulic line under the vehicle with fixed halves, pipe size NW 21, fixed halves with size and type to be specified. Operating pressure 190–max. 240 bar, ALU end pieces welded into the moving floor. Electric operation on the rear left with radio control integrated into a lockable, waterproof box, without hydraulic hoses. Accessories 6 PVC mudguards with 2 anti-spray mud flaps, 6 PVC splash guards above the wheels, 1 ALU spare wheel holder, side ALU underrun protection.

Stanje: novo, največja dovoljena obremenitev: 28.320 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.750 mm, prostornina tovornega prostora: 92 m³, Oprema: ABS, Chassis: Design with continuous frame, newly manufactured in self-supporting aluminum construction with appropriate reinforcements in the lower flange for particularly high stability and strength, crossmembers with a height of 140 mm in reinforced design (for high ground load), additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure. Axles and Suspension: Disc brakes 22.5, Jost (DCA) axle assemblies, 3x9 ton capacity with DCA air suspension, raise/lower function, Wabco Smartboard Info Center, electronic brake wear indicator (BVA, can be read out in the tractor unit display), first axle with start-assist function (new EC regulation, without tractor unit equipment), (first and third axle liftable on request at extra cost). Tyres and Wheels: 6 wheels with tires size 385/65 R 22.5 of manufacturer’s choice (Br-Go-Co) on silver-painted steel rims, 11.75x22.5 ET 120. Kingpin: 2-inch, bolted into a 10 mm thick mounting plate. Landing Gear: Mechanical landing legs with two speeds, 2x 20-ton support capacity with swivel foot. Brake System: According to E.C. regulations, EBS electronic braking system by Wabco with RSS (Roll Stability Support) and premium modulator, spring-type parking brake on two axles operated from the rear, ALU air reservoir system. Electrical System: In accordance with EC Directive 91/633 and 97/28, with 2 five-chamber lamps (Aspöck Europoint) integrated into the ALU rear end, 24-volt system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 reflective warning plates at the rear, position lights at the front (2x white), rear (2x red), 2 separate halogen reversing lights integrated into underrun protection. Body/Tipper Body: Fully welded interior, reinforced side walls, front wall load 17,250 daN, side and rear walls 13,400/10,400 daN. Aluminum tipper body, side walls made from 30 mm thick aluminum plank profiles (2–3 mm), 600 mm wide, completely welded with lower and upper flange, inside profile joints fully welded; floor as walking floor system laid on 140 mm aluminum crossmembers, floor forklift load approx. 9t/m², crossmembers spaced closely (approx. 350 mm), special angled aluminum corner profiles, flat straight rear wall with 2 aluminum swing doors (50/30 mm thick) with 2 locking rods, fixed into the welded ALU rear frame with Teflon and stainless steel bearings; doors secured when open by a chain at each side; hard wear plates welded to side walls, approx. 2000x1500x4 mm; moving residual discharge wall with Kevlar tarp approx. 1800 mm long plus lateral brushes and Kevlar side-sealing; service door in front wall with interior-folding ladder. Iiodpfx Aefi Nmwjhkoa Hydraulic System: Walking floor system in the floor with hydraulically operated ALU profiles on ALU square sections with approx. 880 PE-HD gliders plus anti-lifting slide bearings, Type CF 10 mm floor design, hydraulics with approx. 200 mm working stroke, fixed halves at the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and type to be specified, operating pressure 190–max. 240 bar, ALU end caps welded into walking floor, electric controls on left rear with remote control in a lockable waterproof box, hydraulic hoses not included. Accessories: 6 PVC mudguards with 2 antispray mud flaps, 6 PVC splash guards above the wheels, 1 ALU spare wheel holder, side ALU underrun protection

Stanje: novo, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.750 mm, prostornina tovornega prostora: 92 m³, Oprema: ABS, - Panama sheet 900g - 10 mm floor - V-sheets 2000x1500x4 - Service door in the bulkhead - 12 pairs of lashing rings in the bulkhead Chassis: Reinforced continuous frame design, new body manufactured in self-supporting construction with corresponding reinforcements in the lower flange for exceptionally high stability and strength, crossmembers 140 mm high in reinforced version Axle and Suspension: Disc brakes 22.5"? Jost axle assemblies, 3 x 9 tons with DCA air suspension, lift and lower function, Wabco Smartboard, electronic brake pad wear indicator (BVA), 1st axle with traction aid (without tractor unit configuration) Tyres and Wheels: 6 wheels with premium tyres size 385/65 R 22.5 on steel rims, 11.75 x 22.5 ET 120 Landing Gear: Mechanical landing legs, 2 x 20 t support load Brake System: Wabco EBS E-system with RSS (Roll Stability Support) and premium modulator, spring-actuated parking brake on two axles, operated from the rear Electrical System: In accordance with EU directive 91/633 and 97/28, with two five-chamber lights Aspöck Europoint type integrated in ALU rear, 24 Volt system with 1 x 15-pin and 2 x 7-pin sockets, with side marker lights (LED), 2 separate LED reversing lights integrated in underrun protection Body / Tipper Body: Fully welded interior, reinforced side walls. Aluminium tipper body, side walls 30 mm thick aluminium plank profiles (2–3 mm), 600 mm high, fully welded with top and bottom rails, plank profiles fully welded inside, alu bulkhead with 600 mm plank profile, 2–3 mm thick, straight design, with 2 ALU swing doors 50/30 mm thick, movable residual discharge partition with Kevlar sheet, approx. 1,500 mm long plus side Kevlar tarpaulin seal Hydraulics: 'Cargo Floor' moving floor system, hydraulically operated aluminium floor profiles laid on alu square profiles, with approx. 880 PE-HD sliders, type CF, 8 mm floor, fixed ends at bulkhead, separate option to connect hydraulic line under vehicle with fixed ends, operating pressure 190 – max. 240 bar, ALU end caps welded in moving floor, without hydraulic hoses Accessories: 6 PVC mudguards with 2 anti-spray flaps, 1 ALU E-wheel holder, side alu underrun protection, foldable, 1 tool box approx. 860 x 460 x 400 mm in plastic, 3.7m aluminium ladder, roll tarp approx. 660g/m² with roll tarpaulin system incl. roller bar, either with side tension belts or with quick fastener, catwalk on bulkhead with access ladder, 3 steel bows with swing-out and lockable latches, alu protective cover with hinges foldable for lights, etc. +€590 delivery costs Unladen weight: approx. 7,700 kg Iodpfofi Nmpex Ahkjia Offer and pictures subject to confirmation

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.650 mm, prostornina tovornega prostora: 93 m³, Chassis Design with reinforced continuous chassis, newly constructed bodywork in a self-supporting design with corresponding reinforcements in the lower belt for particularly high stability and strength. Cross members: reinforced version, 140 mm high (for heavy ground loads). Additional reinforcement as gusset plates in the front lower belt/vehicle frame area. Chassis made of galvanized steel up to the support structure (trailer design max. 39,000 kg). Axles and Suspension: 'Disc brake 22.5' Jost (DCA) axle units, 3x9 tons with DCA air suspension, lift and lower function, Wabco Smartboard info center, electronic brake wear indicator (BVA readable on the tractor unit display), 1st axle with traction aid (new EU regulation, without tractor unit equipment), (optionally 1st + 3rd axle can be liftable). Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 from selected manufacturers (Br-Go-Co) on silver steel rims, 11.75 x 22.5 ET 120. Iijdogcw Rmepfx Ahkoa Landing Legs Mechanical landing legs with two speeds, 2x 20 t support load with swiveling foot. Braking System In accordance with EC standard – EBS electronic system by Wabco with RSS (Roll Stability Support) and premium modulator. Spring-loaded brake system acting on two axles with control at the rear. ALU air-tank system. Electrical System According to EC directives 91/633 and 97/28 with two Aspöck Europoint 3 five-chamber lamps integrated into the ALU rear closure, 24V system with 1x 15-pin and 2x 7-pin sockets, LED side marker lamps, two reflective plates on the rear, position lights front 2x white, rear 2x red, two separate LED reverse lights integrated into underrun protection. Body/Tipping Body – Fully Welded Inner Structure Reinforced side walls: front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn. Aluminium tipping body: side walls 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with lower and upper belts. Plank profiles inside fully welded. Floor with moving floor system laid on 140 mm ALU cross-members. Floor load capacity approx. 9 t/m2, cross-members closely spaced (approx. 350 mm). ALU front wall with 600 mm plank profile, 2-3mm thick, straight design. Special ALU corner profiles in chamfered design. Smooth rear wall in straight version with two ALU swing doors, 50/30 mm thick, with 2 bar locks mounted in welded ALU rear frame, with Teflon and stainless steel bearings. Doors secured when opened with one chain each side. Hard-wearing wear plates on side walls approx. 2,000x1,500x4 mm, fully welded. Residual discharge wall with Kevlar tarpaulin approx. 1,800 mm length plus side Kevlar seal. Service door in front wall with inward-turning ladder. Hydraulic System “Cargo Floor” Moving Floor System Moving floor system in the floor with hydraulically operated ALU profiles on ALU box beams, approx. 880 PE-HD slides plus anti-lifting slide bearings. Type CF, 10 mm floor version, hydraulics with approx. 200 mm stroke. Fixed halves at the front wall, separate option for connecting hydraulic line under the vehicle with fixed halves, pipe size NW 21, fixed halves with size and type to be specified. Operating pressure 190–max. 240 bar, ALU end pieces welded into the moving floor. Electric operation on the rear left with radio control integrated into a lockable, waterproof box, without hydraulic hoses. Accessories 6 PVC mudguards with 2 anti-spray mud flaps, 6 PVC splash guards above the wheels, 1 ALU spare wheel holder, side ALU underrun protection.

Stanje: novo, prevoženi kilometri: 60 km, moč: 87 kW (118,29 KM), vrsta goriva: električni, konfiguracija osi: 4x2, medosna razdalja: 4.220 mm, gorivo: elektrika, barva: bela, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, skupna dolžina: 6.450 mm, skupna širina: 2.100 mm, skupna višina: 2.310 mm, Leto izdelave: 2026, Oprema: ABS, EBS (Elektronski zavorni sistem), centralno zaklepanje, dvižna zadnja plošča, električno nastavljivo ogledalo, električno upravljanje oken, klimatska naprava, servovolan, tempomat, = Dodatne možnosti in oprema = - Ogrevana zunanja ogledala - Sovoznikova klop - Voznikov zračni meh - Centralno zaklepanje z daljinskim upravljanjem - Tempomat - Višinsko nastavljiv voznikov sedež - Višinsko nastavljiv volan - Klimatska naprava - LED dnevne luči - Sprednja sredinska naslonjala za roke - Radio DAB MP3 Bluetooth 4.0 - Kamera za vzvratno vožnjo - Stranska vrata - Imobilizator - Ogrevanje vetrobranskega stekla - Predelna stena = Dodatne informacije = Splošne informacije Število vrat: 2 Leto izdelave: 2026 Kabina: enojna Konfiguracija osi Prednja os: Najv. obremenitev osi: 1850 kg; Krmiljena Največja obremenitev zadnje osi: 2100 kg Teže Iiedpfxjwzizyj Ahkoa Največja dovoljena skupna masa: 3.500 kg Funkcionalno Nakladalna ploščad: D'HOLLANDIA DH-LMA.08, zadnja dvižna vrata, 750 kg Stanje Splošno stanje: zelo dobro Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro

Stanje: rabljeno, največja dovoljena obremenitev: 32.447 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2023, naslednji pregled (TÜV): 10/2026, dolžina tovornega prostora: 13.110 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 2.650 mm, prostornina tovornega prostora: 86 m³, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 2023, Oprema: ABS, STAS 3-Axle Hardox Steel Tipper 86 m³ First registration 01/2023, one owner Mileage 188,744 km Internal dimensions (LxWxH): 13,110 x 2,350 / 2,450 x 2,770 mm (conical design) Unladen weight: 9,640 kg Continuous 5 mm Hardox steel HB450 floor Front and side walls in 3 mm Hardox steel HB450 Pneumatically folding rear underrun protection Straight front wall, interior access ladder Rear portal doors 50:50, pneumatic remote unlocking Reinforced roof tarpaulin with roll-up mechanism HYVA tipping cylinder Type Alpha, low pressure 2x pneumatic vibrators JOST full-load crank landing legs SAF axles with large disc brakes, 430 mm 1st axle LIFT AXLE Iedpey Dy E Ujfx Ahksia WABCO Trailer EBS with rollover protection RSS WABCO Smartboard Lifting and lowering device Automatic tipping lowering function 6x tyres 385/55 R 22.5 ALCOA Dura-Bright high-gloss aluminium rims Aluminium access ladder Shovel and broom holder Toolbox left side 4x LED reversing spotlights RENTING is the new BUYING – available immediately as full-service rental with us

Stanje: rabljeno, največja dovoljena obremenitev: 32.410 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2024, naslednji pregled (TÜV): 03/2027, dolžina tovornega prostora: 13.110 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 2.650 mm, prostornina tovornega prostora: 86 m³, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 2024, Oprema: ABS, STAS 3-Axle Hardox Steel Tipper 86 m³ First registration 02/2024, one owner Mileage: 152,200 km Internal dimensions (LxWxH): 13,110 x 2,350 / 2,450 x 2,770 mm (tapered design) Unladen weight: 9,640 kg Floor made entirely of 5 mm Hardox steel HB450 Front wall and side walls made of 3 mm Hardox steel HB450 Pneumatically retractable rear underrun protection Straight front wall, internal access ladder Rear portal doors 50:50 split, pneumatic remote unlocking Heavy-duty reinforced sliding roof tarpaulin HYVA tipping cylinder, Alpha type, low-pressure 2x pneumatic vibrators JOST crank landing legs, full load SAF axles with large disc brakes, 430 mm 1st axle: LIFT AXLE WABCO trailer EBS with rollover stability support (RSS) WABCO Smartboard Lifting and lowering device Automatic tipping lowering function Tyres: 6 x 385/55 R 22.5 ALCOA Dura-Bright high-gloss aluminium rims Iiodey Dy Hropfx Ahkja Aluminium access ladder Shovel and broom holder Toolbox on left side 4x LED reversing lights RENTING is the new BUYING – now available for immediate full-service rental with us -----

Stanje: rabljeno, največja dovoljena obremenitev: 32.590 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2024, naslednji pregled (TÜV): 04/2027, dolžina tovornega prostora: 9.665 mm, širina tovornega prostora: 2.475 mm, višina nakladalnega prostora: 2.165 mm, prostornina tovornega prostora: 52 m³, skupna širina: 2.550 mm, skupna višina: 3.690 mm, Leto izdelave: 2024, Oprema: ABS, STAS 3- osovinska aluminijumska kiper prikolica 52 cbm Erstzulassung 04/2024 Ukupna kilometraža 152.817 km Dimenzije unutrašnjosti (DxŠxV): 9.665 x 2.475 x 2.165 mm Širina za palete Neto težina 6.410 kg Pod potpuno izrađen od 8 mm ALU sa tvrdoćom 110 Brinell Prednji zid 4 mm ALU Bočni zidovi profilisani 3 mm-2 mm, glatka izvedba iznutra i spolja Dvokrilna kombi vrata sa klatnom funkcijom, pneumatsko naknadno otključavanje 2 komada kliznih otvora za žitarice sa 1x vrećom za zaštitu od prašine Ojačana krovna rolo cerada HYVA kip cilindar tip Alpha, pogodan za visok i nizak pritisak Ručno podizanje poluprikolice za punu nosivost SAF osovine sa velikim disk kočnicama, 430 mm 1. osovina podizna osovina WABCO Trailer-EBS sa zaštitom od proklizavanja RSS WABCO Smartboard uređaj za podizanje i spuštanje Pneumatici 385/65 R 22.5 Aluminijumske pristupne merdevine Držač za lopatu i metlu Kutija za alat sa desne strane 4x LED zadnja radna svetla IZNAJMLJIVANJE je nova kupovina, kod nas dostupna i u full-service najmu odmah! Iiodpjy Dy Hfofx Ahkoa

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 12.355 mm, širina tovornega prostora: 2.475 mm, višina nakladalnega prostora: 2.165 mm, prostornina tovornega prostora: 608 m³, skupna širina: 2.550 mm, skupna višina: 2.165 mm, Leto izdelave: 2026, Equipment: * Chassis material: Aluminum * Chassis type: V-chassis * Fifth wheel load (national): 12 t * Axle load (national): 8 t * Axle spacing (mm): 1310-1310 * Coupling height (mm): 1150 * Chassis width (mm): 1400 * Loading width (mm): 2475 * Chassis series: 110 Iiedpfxjy Dmv Hj Ahkoa * Internal height front (mm) (IHF): 2165 * Internal height rear (mm) (IHB): 2165 * Loading length (mm): 11364 * KC-value: 0800 * Total width (mm): 2550 * Volume (m³): 60.8926 * Wheelbase (mm) (WB): 7470 * Total length (mm): 12355 * Brake version: Disc brake * Offset (ET): 120 * Option: 1st axle with lift axle and traction aid * Activation of traction aid via push button in the truck (installation of button not included in scope of supply) and by threefold actuation of the brake pedal * Option: 3rd axle with lift axle and Optiturn * Activation of additional lift axle control via Wabco Smartboard * Brake lining wear indicator connected * Return-to-ride (RTR): 15 km/h * ECAS air suspension with lift and lower valve * Automatic lowering of air suspension during tipping operation, can be manually locked via Smartboard as well as switch on chassis * Pneumatic coupling head: European palm coupling * Control console: EBS controls on left side in direction of travel, in front of axles * Standard Smartboard * Landing gears: Weweler * Tire size: 385/65R22.5 * Tire pressure monitoring: Wabco Trailerpulse * Rims: Alcoa Dura Bright * Tire type: Regional * TPMS sensor type: rim-mounted sensor * Wheel nut caps: Chrome with STAS logo * Lighting type: ECOLED III - with STAS logo * Work lamp position (activated by switch): 2 LED reversing lights rear left and right, mounted on lamp bracket * Work lamp position (activated by switch): 2 LED reversing lights front left and right, mounted in area of landing gears * LEDs in door end crossmember: 2 x 3-function LED * Underrun protection operated manually * Spray flaps underrun protection: Black with STAS logo * Cylinder tipping angle: Normal ±47° * Tipping cylinder model: Hyva - FC 169 * Tipping cylinder stroke: 8130 * Tipping cylinder max. pressure: 250 * Surface treatment of cylinder stages: Standard surface * Hydraulic coupling: Rotary coupling * Hydraulic coupling - size: 1 * Hydraulic coupling - gender: Female * Hydraulic coupling - hose: 2,500 mm * Mudguard type: Domar STAS with white stripe * Splash guard type mudguard: Clear Pass * Toolbox: 860x520x500 * Air connection left side, mounted on lamp carrier * 3 m aluminum access ladder * Two plastic chocks * Safety device chassis - body: Rubber polyps Body: * Front wall slope (°): 90 * Rear wall slope (°): 90 * Inner lower rail profile slope (°): 90 * Front wall: 4 mm (Aluminum) * Side wall profile: 3 mm - 2 mm * Floor: 8 mm ALU - 110 Brinell * Rubber pads mounted below the floor crossmembers * Rear wall type: Combination door * Rear wall: Aluminum * Combination door type: 1/2 - 1/2 with swivelling door end crossmember * Door end crossmember in swivelling design * Slide position: 2 pieces, left + right * Additional rear wall locking: Pneumatic double-acting * Operation of additional lock: automatic during unloading, additionally manually via control on the side of the control panel * Quantity and position of bows: 3 center bows (centrally, evenly spaced) and 1 rear bow (at rear) * Bow type hinge position: right

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.880 mm, širina tovornega prostora: 2.475 mm, višina nakladalnega prostora: 2.165 mm, skupna širina: 2.550 mm, skupna višina: 2.165 mm, Leto izdelave: 2026, Equipment: * Chassis material: Aluminium * Chassis type: V-chassis * Kingpin load (National): 12 t * Axle spacing (mm): 1310-1310 * Fifth wheel height (mm): 1175 * Chassis width (mm): 1400 * Loading width (mm): 2475 * Chassis series: 080 * Internal height front (mm): 2165 * Internal height rear (mm): 2165 * Loading length (mm): 8880 * KC-Value: 0400 * Overall width (mm): 2550 * Volume (m³): 47.5824 * Wheelbase (mm): 5800 * Overall length (mm): 10259 * Chassis * Axles, brakes and suspension * Axles: SAF * Offset (ET): 120 * Option: 1st axle with lift axle and traction aid * Option: 3rd axle with lift axle and Optiturn * Activation of additional lift axle control via Wabco Smartboard * Brake pad wear indicator * Return-to-ride (RTR): 15 km/h * ECAS air suspension with lift and lower valve * Automatic lowering of the air suspension during tipping, can be locked manually via Smartboard or switch on chassis * Pneumatic coupling head: European Palm Coupling * EBS control panel on the left-hand side in the direction of travel, in front of the axles * Standard Smartboard * Air and electric console on the right-hand side in the direction of travel * Landing gears: Weweler as steel gear landing gears, type Weweler, with compensation feet, single-sided operation and 2 speed settings * Tyre size: 385/65R22.5 * Tyre pressure monitoring: Wabco Trailerpulse * Rims: Alcoa Dura Bright * Tyre type: regional distance * TPMS sensor type: rim-mounted sensor * TPMS sensor * Wheel nut caps: Chrome with STAS logo * Work light position (operated by switch): 2 LED reversing lights at the rear, left and right in the direction of travel, mounted on the lamp bracket * Work light position (operated by switch): 2 LED reversing lights at the front, left and right in the direction of travel, mounted in the area of the landing gears * LEDs in rear cross member: 2 x 3-function LED * Manual underrun protection operation * Towing eye: 2 pieces, left and right * Rear underrun splash guards: Black with STAS logo * Cylinder tipping angle: Normal ±47° * Tipping cylinder model: Hyva - FC 169 * Tipping cylinder stroke: 6480 * Tipping cylinder max. pressure: 250 * Cylinder stage surface treatment: Standard surface * Hydraulic coupling: rotary coupling * Hydraulic coupling size: 1 * Hydraulic coupling gender: female * Hydraulic coupling hose: 2,500 mm * Mudguard type: Domar STAS with white line * Number of mudflap pieces on mudguard: 2 * Mudflap type (on mudguard): asphalt Iiedpfx Ahsy Dmvmokoa * Toolbox: 860x520x500 * Aluminium access ladder 3 m - right side in direction of travel * Holder for broom and shovel * Ferry rings * 2 lashing eyes at rear of chassis * 2 plastic wheel chocks * Body retention device: chassis - body rubber buffer Body: * Front wall angle (°): 20 * Rear wall angle (°): 90 * Inner lower belt profile angle (°): 45 * Front wall: 4 mm aluminium * Sidewall profile: 3 mm - 2 mm * Floor: 8 mm aluminium - 110 Brinell * Rubber pads attached below floor cross members * Rear wall type: combination door * Combination door type: 2/3 - 1/3 with pivoting door end cross member * Right door leaf opens first * Door end cross member: pivoting design * Hinge type: double door hinge * Sliding shutter: rectangular design * Position of shutter: 1 piece, centered * Grain outlet / dust sack: 1 grain hopper incl. dust sack * Smooth surface on rear wall * Open door leafs are fixed using a chain * ...

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.880 mm, širina tovornega prostora: 2.475 mm, višina nakladalnega prostora: 2.165 mm, prostornina tovornega prostora: 476 m³, skupna širina: 2.550 mm, skupna višina: 2.165 mm, Leto izdelave: 2026, Equipment: * Chassis material: aluminum * Chassis type: V-chassis * King pin load (National standard, t): 12 * Axle spacing (mm): 1310-1310 * Fifth wheel height (mm): 1175 * Chassis width (mm): 1400 * Loading width (mm): 2475 * Chassis series: 080 * Internal front height (mm): 2165 * Internal rear height (mm): 2165 * Loading length (mm): 8880 * KC-Value: 0400 * Total width (mm): 2550 * Volume (m³): 47.5824 * Wheelbase (mm): 5800 * Total length (mm): 10259 * Chassis * Axles, brakes, and suspension * SAF axles Iisdpfx Ahoy Dmvaekja * Wheel offset (ET): 120 * Option: 1st axle with lift axle and starting aid * Option: 3rd axle with lift axle and Optiturn * Activation of additional lift axle control via Wabco SmartBoard * Brake pad wear indicator * Return-to-ride (RTR) 15 km/h * ECAS air suspension with raise and lower valve * Automatic lowering of air suspension during tipping, manually lockable via SmartBoard and chassis switch * Pneumatic coupling head: European palm coupling * Control console: EBS controls on left in direction of travel, ahead of axles * Standard SmartBoard * Air and electric console on right in direction of travel * Landing gears: Weweler, steel gearbox landing gears, Weweler type, with compensation feet, single-sided operation, and 2-speed * Tire size: 385/65R22.5 * Tire pressure monitoring: Wabco TrailerPulse * Rims: Alcoa Dura-Bright * Tire type: Regional use * TPMS sensor type: rim-mounted sensor * TPMS sensor * Wheel nut caps: chrome with STAS logo * Work lamp positions (switched): 2x LED reverse lamps rear left and right in direction of travel, mounted on lamp bracket * Work lamp positions (switched): 2x LED reverse lamps front left and right in direction of travel, mounted in landing gear area * LEDs in rear door cross member: 2x 3-function LED * Manual control for underrun protection * 2 towing eyes, left and right * Spray flaps under underrun protection, black with STAS logo * Cylinder tipping angle, standard ±47° * Model tipping cylinder: Hyva - FC 169 * Tipping cylinder stroke: 6480 * Tipping cylinder max. pressure: 250 * Standard surface finish for cylinder stages * Hydraulic coupling: rotary coupling * Hydraulic coupling - size 1 * Hydraulic coupling - female * Hydraulic coupling hose: 2,500 mm * Mudguard type: Domar STAS with white stripe * Number of mudguard flaps: 2 * Mudguard flap type: Asphalt * Toolbox: 860x520x500 * Aluminum ladder 3m, right side in direction of travel * Broom and shovel holder * Ferry lashing rings * 2 lashing eyes at rear of chassis * 2 plastic wheel chocks * Retention device chassis/body: rubber poly-pad Body: * Front wall angle (°): 20 * Rear wall angle (°): 90 * Lower belt profile internal angle (°): 45 * Front wall: 4 mm (aluminum) * Side wall profile: 3 mm - 2 mm * Floor: 8 mm ALU - 110 Brinell * Rubber pads installed below floor cross members * Rear wall type: combination door * Combination door design: 2/3 - 1/3 split with pivoting upper transverse door rail * Door leaf opens right first * Pivoting transverse door rail * Hinge type: double knuckle * Slide type: rectangular * Slide position: 1 piece, centered * Grain outlet/dust bag: 1 grain funnel incl. dust bag * Smooth rear wall surface * Open door leaves secured by chain * Standard rubber seal on rear wall * Extra aluminum round profile

Stanje: novo, dolžina tovornega prostora: 13.513 mm, širina tovornega prostora: 2.475 mm, višina nakladalnega prostora: 2.641 mm, prostornina tovornega prostora: 906 m³, skupna širina: 2.550 mm, Leto izdelave: 2026, Equipment: * Chassis material: Steel * Chassis type: Moving floor (walking floor) * King pin load (National, t): 12 * Axle load (National, t): 8 * Axle spacing (mm): 1310-1310 * Saddle height (mm): 1150 * Chassis width (mm): 1200 * Loading width (mm): 2475 * Chassis series: 135 * Wheelbase (WB) moving floor semi-trailer (mm): 7850 * Internal height front (mm) (IHF): 2641 * Internal height rear (mm) (IHB): 2778 * Loading length (mm): 13513 * Neck height (mm): 217 * Total width (mm): 2550 * Volume (m³): 90.6183 * Total length (mm): 14000 * Axles: SAF * Axle version: Intra * Brake version: Disc brake * Brake type: SAF - SBS 2220 (Haldex) * Offset (ET): 120 * Option: 1st axle with lift axle and traction aid * Activation of traction aid via button in truck (installation of button not included) and by pressing brake pedal three times * Option: 3rd axle with lift axle * Brake pad wear indicator connected * Return-to-ride (RTR): 15 km/h * Air suspension: ECAS with lift and lower valve * Lowering of air suspension via smartboard as well as lift/lower valve * Pneumatic coupling head: European palm coupling * Control console: EBS control on driver's side, behind axles * Standard smartboard * Air and electrical console centrally mounted with gantry * Landing legs: Weweler * As steel gearbox landing legs, type Weweler, with compensating feet, single-sided operation and 2 speed stages * Position of landing leg crank handle: outside * Tyre size: 385/65R22.5 * Tyre pressure monitoring: Wabco Trailerpulse * Rims: Steel * TPMS sensor type: Rim-mounted sensor * Wheel nut caps: Black - PVC with STAS logo * Lighting type: ECOLED III - with STAS logo * Reversing lights: 2 LED reversing lights, mounted at rear left and right on the lamp holder * Work lights (operated via switch): 2 LED reversing lights at front left and right, mounted near landing legs * Protection of lighting unit: One-piece mudguard * LEDs in door end cross member: 2 x 3-function LED * Operating underrun protection: Fixed underrun bar * Mud flaps underrun protection: Black with STAS logo * Hydraulic coupling: Swivel coupling * Hydraulic coupling - size: 3/4 Iisdpfoy Dmu Nex Ahkea * Hydraulic coupling - gender: Female * Hydraulic return coupling: Swivel coupling * Hydraulic return coupling - size: 1 * Hydraulic return coupling - gender: Female * Hydraulic coupling - hose: 3,000 mm * Hydraulic coupling - position: Connection possible at front wall (additional connection possible at landing legs) * Hydraulic positioning: Pressure return, pressure left, return right (CON) * Number of mud flaps on fenders: 2 pieces * Toolbox * Air connection mounted laterally on control panel * Aluminium access ladder 3.80 m - right side * Broom and shovel holder * Two plastic wheel chocks * Profile front wall: 3 mm - 2 mm * Profile side wall: 3 mm - 2 mm * Moving floor system: Cargo Floor brand * Floor system operation: Radio remote control * Cargo Floor Control type: CF 500 SL-C - E-CONTROL * Number of floor profiles: 21 * Front wall inclination (°): 90 * Rear wall inclination (°): 90 * Floor profile type: 8 mm ribbed * Oil temperature sensor for moving floor system * Residue emptying wall: Aluminium * Storage for residue emptying wall: 6 wheels with bi-directional cleaning (Cargo Floor) * Door type: Swing door, 1/2 to 1/2 division, with door end cross member

Stanje: rabljeno, največja dovoljena obremenitev: 34.725 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2024, naslednji pregled (TÜV): 10/2026, dolžina tovornega prostora: 8.912 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 2.285 mm, prostornina tovornega prostora: 50 m³, skupna širina: 2.550 mm, skupna višina: 3.672 mm, Leto izdelave: 2024, Oprema: ABS, STAS 3-Axle Hardox Steel Tipper 50 cbm "X-Shape" First registration: 10/2024 Mileage: 47,509 km Internal dimensions (LxWxH): 8,912 x 2,350/2,450 x 2,285 mm (conical body in width) Unladen weight: only 7,275 kg Z-chassis, cranked version Continuous 5 mm Hardox steel HB450 floor Front and side walls in 4/3 mm Hardox steel HB450 Sloped front wall, internal access ladder 2-wing rear portal doors, pneumatic remote unlocking 1 piece GRAIN SLIDE in the right door wing Reinforced roof roll tarp, CENTRAL LOCKING HYVA tipping cylinder Type Alpha, suitable for high and low pressure ALU landing legs, full-load rated 2x air vibrators below the body SAF axles with large disc brakes, 430 mm 1st axle: LIFT AXLE with traction aid WABCO Trailer-EBS with RSS rollover protection WABCO SmartBoard Iodpfoyy Hakex Ahksia Automatic tip lowering Lifting and lowering device Tyres: 385/65 R 22.5 ALCOA Dura-Bright high-gloss aluminium rims Aluminium access ladder Shovel and broom holder Toolbox on the right 4x LED reversing lights RENTING is the new BUYING, and with us also available immediately in FULL-SERVICE RENTAL-----

Stanje: rabljeno, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2024, prostornina tovornega prostora: 91 m³, Leto izdelave: 2024, Oprema: ABS, bioSTAR 91.3 cbm Basalt Grey Axle Spacing (mm): 1310-1310 Fifth Wheel Height (mm): 1150 Chassis Width (mm): 1200 Loading Width (mm): 2475 Internal Front Height (mm) (IHF): 2641 Internal Rear Height (mm) (IHB): 2821 Loading Length (mm): 13513 Volume (m³): 91.3 Chassis Material: Steel Tyre Size: 385/65R22.5 Neck Height (mm): 217 Axles: JOST Brake System: Disc brakes Brake Type: JOST - DCA-T7 Offset (ET): 120 Option: 1st axle with traction aid Optimized traction aid with activation via switch in the truck (switch installation not included in standard scope) and triple actuation of brake pedal Brake pad wear indicator connected Tyre pressure monitoring: Wabco Trailerpulse Air suspension: ECAS with raise/lower valve Lowering of air suspension via Smartboard Rims: Speedline Diamond Landing gears: Weweler steel gearbox landing legs, type Weweler, with compensating feet, single-side operation, and 2 speed stages Underrun protection: fixed underrun bar Splash flaps underrun protection: black with STAS logo, mounted full width Control panel for EBS: driver's side, behind axles Control panel for moving floor: driver's side, behind axles Toolbox: driver's side, behind axles Toolbox material: plastic, driver's side, behind axles Mudguard type: Domar STAS with white line Number of splash flaps on mudguard: 2 pcs Type of splash flap: Clear Pass Lighting manufacturer: Aspöck Lighting type: EUROPOINT III - LED 2 x LED reversing lights, rear, mounted on lamp bracket left and right Work lights (activated by switch): 2 x LED reversing lights, front, mounted near landing legs left and right Hydraulic coupling: rotary coupling Hydraulic coupling size: 3/4" Hydraulic coupling: male Iijdpfxsy Aq S Ao Ahksa Hydraulic return rotary coupling Hydraulic return coupling size: 1" Hydraulic return coupling: male Hydraulic hose: 3,000 mm Hydraulic coupling position: interface at front wall (plus option at landing gear) Standard Smartboard Air connection in the toolbox Aluminium access ladder 3.80 m - installed passenger side Holder for broom and shovel, 3 brackets each Moving floor system: Cargo Floor Rear wall: Swing doors A-sign flap on rear wall, mounted on passenger side Cover plate between floor and front wall: fixed aluminium plate and PVC strips Front wall profile: 3 mm - 2 mm Side wall profile: 3 mm - 2 mm, smooth inside and out, double-walled profile 600 mm wide, 30 mm thick Wear plates: rectangular 1500 x 1000 x 4 mm Moving floor operation: remote control Cargo Floor Control: CF 500 SL-C - E-CONTROL Number of floor profiles: 21 Type of floor profile: 8 mm ribbed End plate moving floor: stainless steel With additional plastic guides below floor profiles End cap reinforcement: stainless steel shoes over end caps, with aluminium wear plate above end caps Oil temperature sensor for moving floor system Emptying wall: aluminium Swing door split: 1/2 to 1/2 Door crossbeam: pivoting type Additional rear wall lock: single-acting pneumatic Rear door bump protection: aluminium ramp buffer, full width

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Stas 56 m³, dvižna os, nosilnost 6000 kg, vrata, prekucna stranica z dvema zaporama, aluminijasta platišča Alcoa, letnik 2016, registriran, ponjava v dobrem stanju, pnevmatike dobre, smart board, zelo dobro stanje. Podrobnosti v zasebno sporočilo. Iodpfoyzg Uqox Ahkoia

Stanje: rabljeno, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2017, naslednji pregled (TÜV): 03/2026, Oprema: ABS, Stas S300ZX Moving Floor Trailer 90 m³ Iodpfx Asxyciljhksia * 90 m³ loading volume * SAF axles * 1st and 3rd axle liftable * Air suspension * Pneumatic control * Disc brakes * Sliding tarpaulin * Smartboard * Double-wing rear doors with rotary bar lock * Access ladder and platform at the front wall * ABS connection * 2 x 7-pin electrical connections * ISO air couplings with red and yellow coupling heads * 21 wooden floor slats * Lashing rings on the sides of the loading area * Foldable rear light protection * Loading pressure gauge Subject to prior sale and errors excepted! Sale exclusively according to our general terms and conditions. Important Notice: Despite careful verification of all details in our offer, errors may occur. Some of these may result from transmission errors in the systems of various platform providers. Therefore, please note that all information is provided without guarantee and does not constitute a legal claim. Legal Information: This sales advertisement does not constitute an offer in the sense of §145 of the German Civil Code (BGB). Rather, it serves as information to initiate a contract. All information provided here is without guarantee and does not constitute warranted characteristics.

Stanje: rabljeno, največja dovoljena obremenitev: 30.780 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2023, dolžina tovornega prostora: 7.500 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 1.650 mm, prostornina tovornega prostora: 29 m³, Leto izdelave: 2023, Oprema: ABS, Zrak, 2× dvig, Jost-plošča, EBS, padajoče podporne noge, dostopna lestev, aluminijasta platišča, SmartBoard, ECAS, majhen WZK, PVC polovične blatnike, vibrator, nadzor tlaka v pnevmatikah z vključenim polnjenjem, pnevmatsko zložljiv podvozni ščit, naležna zadnja stena, drsnik, Okulen, Cramaro ponjava. Iodpfx Ahsy Dy Atoksia

Stanje: rabljeno, največja dovoljena obremenitev: 34.725 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2024, naslednji pregled (TÜV): 10/2026, dolžina tovornega prostora: 8.912 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 2.285 mm, prostornina tovornega prostora: 50 m³, skupna širina: 2.550 mm, skupna višina: 3.672 mm, Leto izdelave: 2024, Oprema: ABS, STAS 3-Axle Hardox Steel Tipper 50 cbm "X-Shape" First registration 10/2024, condition like NEW Iedpfjyxb E Esx Ahkoia Dimensions (internal, LxWxH): 8,912 x 2,350/2,450 x 2,285 mm (tapered body in width) Unladen weight only 7,275 kg Z-chassis dropped version Floor made entirely of 5 mm Hardox steel HB450 Front wall and sidewalls 4/3 mm Hardox steel HB450 Inclined front wall, interior access ladder Twin-leaf portal doors, pneumatic secondary release 1 GRAIN SLIDE in the right door leaf Heavy-duty reinforced sliding roof, CENTRAL LOCKING HYVA tipping cylinder, Alpha type, suitable for high and low pressure Full-load ALU landing legs 2x air vibrators mounted beneath the body SAF axles with large 430 mm disc brakes 1st axle is a LIFT AXLE with starting aid WABCO Trailer EBS with RSS roll stability support WABCO Smartboard Automatic tipping lowering system Lifting and lowering device Tyres: 385/65 R 22.5 ALCOA Dura-Bright high-gloss aluminium rims Aluminium access ladder Shovel and broom holder Toolbox on right side 4x LED reversing lights RENTING is the new BUYING—now also available from us as FULL-SERVICE-RENTAL and ready for immediate delivery.

Stanje: rabljeno, največja dovoljena obremenitev: 32.590 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2023, naslednji pregled (TÜV): 11/2026, dolžina tovornega prostora: 9.700 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.250 mm, prostornina tovornega prostora: 54 m³, skupna širina: 2.550 mm, skupna višina: 3.690 mm, Leto izdelave: 2023, Oprema: ABS, STAS 3-osovinski potpuno aluminijumski kiperski poluprikoličar 54 cbm Prva registracija 11/2023 Pređeni put samo 125.653 km Dimenzije unutrašnjosti (D x Š x V): 9.700 x 2.480 x 2.250 mm Visina utovara/istovara: 3.690 mm Visina sedla: 1.150 do 1.200 mm JOST osovine sa velikim disk kočnicama, 430 mm 1. osovina podizna osovina WABCO EBS sistem za prikolice sa RSS programom stabilnosti WABCO Smartboard ALU vazdušni rezervoari Pneumatici 6x 385/65 R 22.5 ALCOA Dura-Bright visokosjajne aluminijumske felne Navojne nogare za sedlo Potpuno LED osvetljenje 4 LED radna reflektora EDBRO cilindar za kipovanje Dno sanduka u kontinuitetu od 8 mm aluminijuma visoke otpornosti na habanje Prednji zid ojačan Zadnja vrata dvokrilna kombinovana, sa klatnom funkcijom 2x otvora za žito Krovna cerada na uvlačenje sa centralnim zatvaračem Pneumatski vibracioni uređaj Iedpfx Ahjywf Axjksia Stanje: 1-A, odlično održavan IZNAJMLJIVANJE je nova KUPNJA, kod nas je moguća i full-service najam odmah dostupna-----

Stanje: rabljeno, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2022, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.475 mm, prostornina tovornega prostora: 90 m³, Leto izdelave: 2022, Oprema: ABS, Vehicle identification no.: YE6S300ZXN0000950 German MOT due FRAME: ALUMINIUM – Welded aluminium construction with additional reinforcement at axle mounts Unladen weight: 7,650 kg Volume: approx. 90.0 m³ Dimensions: 13,500 x 2,475 x 2,565/2,752 mm Side walls inside & outside smooth Side wall profiles approx. 600 mm wide, 30 mm thick, 3 mm inside, 2 mm outside (grain design) FLOOR BOARDS: 21 aluminium floor boards, 7 mm smooth, extremely durable with welded aluminium end caps Cramaro overquick with electric remote control MERCEDES-BENZ JOST axles with disc brakes 2 x LIFT AXLE Platform Wabco Smart Control Air suspension Crank-operated landing gear Tyres: 385/65 R 22.5 Spare wheel holder WITHOUT spare wheel ALUMINIUM wheels Iiodpfx Ahoylfafskoa Changes, prior sale and errors excepted. This description serves as general identification of the vehicle and does not constitute a warranty in the legal sense. The contractual description at the time of sale is binding. Our offer is generally without new TÜV inspection. Should you require a new TÜV inspection, we would be pleased to provide a quote from our partner workshops! Vehicle may have advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply.

Stanje: rabljeno, največja dovoljena obremenitev: 34.928 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2024, naslednji pregled (TÜV): 01/2027, dolžina tovornega prostora: 8.912 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 2.280 mm, prostornina tovornega prostora: 50 m³, skupna širina: 2.550 mm, skupna višina: 3.672 mm, Leto izdelave: 2024, Oprema: ABS, STAS 3-Axle Hardox Steel Tipper 50 cbm "AGRAR-LINER" First registration: 16.01.2024; Condition: like NEW Internal dimensions (LxWxH): 8,912 x 2,350/2,450 x 2,280 mm (tapered design) Unladen weight: only 7,072 kg Z-chassis, cranked design Continuous floor in 4 mm Hardox steel HB450 Iiedpfxoyv T Sxo Ahkoa Front wall and side walls in 3 mm Hardox steel HB450 Angled front wall, interior access steps Double-wing combined doors with swinging function, pneumatic secondary unlocking 2 x grain discharge slides, each with 1x dust protection bag Reinforced roll-over roof tarp HYVA tipping cylinder, Alpha type, suitable for high & low pressure Full-load ALU landing legs 2x pneumatic vibrators underneath the superstructure SAF axles with large disc brakes, 430 mm 1st axle is a lift axle WABCO trailer EBS with Rollover Stability Support (RSS) WABCO Smartboard Lifting and lowering device Tyres: 385/65 R 22.5 Aluminium access ladder Mounting holders for shovel and broom Toolbox on the right 4x LED reversing spotlights RENTING is the new BUYING: Full-service rental available immediately from us

Stanje: rabljeno, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2021, naslednji pregled (TÜV): 11/2026, dolžina tovornega prostora: 13.530 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.730 mm, prostornina tovornega prostora: 92 m³, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Oprema: ABS, STAS Biostar Schubboden +/- 92 cbm, 'Cargo-Floor' pod sa 21 dasaka, debljine 6 mm, potpuno pražnjenje (pomjerivi prednji zid), funkcija izvlačenja i uvlačenja, daljinski upravljač za pod, dvokrilna vrata sa štapnim zatvaračem pozadi, pristupna stepenica i platforma napred na nadgradnji, klizna cerada, servisna vrata u prednjem zidu, preklopni nosači iznad vrata, ABS, EBS, SAF Intradisk+ osovine, 1. osovina - podizna osovina, disk kočioni sistem, Wabco Smartboard, pneumatsko ogibljenje sa funkcijom podizanja i spuštanja, podupirači, inox kutija za alat, vozilo može biti obljepljeno reklamama i/ili natpisima. Ijdpfxjyzvxxo Ahkoia

Stanje: dober (rabljeno), konfiguracija osi: 3 osi, prva registracija: 05/2011, dolžina tovornega prostora: 10.000 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 2.150 mm, skupna dolžina: 10.900 mm, skupna širina: 2.550 mm, skupna višina: 3.750 mm, vzmetenje: zrak, velikost pnevmatike: 385/65R22,5, barva: drugo, Leto izdelave: 2011, Oprema: ABS, = Additional Options and Equipment = - EBS = Remarks = Number of axles: 3, unladen weight: 7,340 kg, gross weight: 39,000 kg, kingpin size: 2 inch, suspension type: full air, ABS, EBS, body year of manufacture: 2011, side wall material: aluminium, number of sides: 1 side, axle type: MERCEDES-BENZ, 55M3 ALU, COIL = Further Information = General Information: Cabin: Day Registration number: KLEYN1 Driveline: Fuel type: Diesel Transmission: Gearbox: Manual transmission Axle Configuration: Tyre size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tyre tread left: 10 mm; tyre tread right: 8 mm Axle 2: Tyre tread left: 14 mm; tyre tread right: 9 mm Axle 3: Tyre tread left: 10 mm; tyre tread right: 7 mm Weights: Unladen weight: 7,340 kg Payload: 31,660 kg Gross vehicle weight: 39,000 kg Environment: Emission class: Euro 0 Condition: Technical condition: good Visual condition: good Damages: none = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range covers all European brands, years of manufacture, and price categories. Why buy from Kleyn Trucks? Simple! • Large, fast-moving stock • Recognisable quality • Competitive pricing • Reliable commercial practices Iijdpfx Asw S Dfmohkea • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Expert technical services • The security of 'recognisable quality' • And more… Visit our website for special offers and complete stock: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an enquiry through our website. Ask directly about our European warranty package.