Es-Ge 3-Achs Sattelanhänger - Bordwände + Cv nakup rabljenega (47.547)

Stanje: rabljeno, lastna masa: 5.950 kg, največja dovoljena obremenitev: 29.050 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2019, naslednji pregled (TÜV): 02/2027, dolžina tovornega prostora: 7.360 mm, širina tovornega prostora: 2.340 mm, višina nakladalnega prostora: 1.500 mm, prostornina tovornega prostora: 25 m³, vzmetenje: zrak, velikost pnevmatike: 385 / 65 R 22,5, barva: oranžna, vrsta prenosa: drugo, velikost sprednje pnevmatike: 385 / 65 R 22,5, velikost zadnje pnevmatike: 385 / 65 R 22,5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, Osnovna barva: oranžna Dodatki v opremi ABS, zračna vzmetenje, vzmetenje: zračno dviganje, nosilnost (kg): 29050 Tip nadgradnje: jeklo - jeklena kesonska prikolica cca 25 m³, D x Š x V 7.360 x 2.340 x 1.500 mm, Hardox 450 - (5 mm dno / 4 mm bočne stene), BPW osi z zračnim vzmetenjem, 1. os dvižna, bobnaste zavore, aluminijasta platišča, platforma, rolo ponjava, elektrika 24 V - 15 + 2 x 7-polno, ABS, zračni priključek rdeč/rumen, podporne noge, lastna teža 5.950 kg Kjdpfoy Igt Hsx Amhsnb

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.510 mm, širina tovornega prostora: 24.500 mm, vzmetenje: zrak, velikost pnevmatike: 385/65-22,5, barva: črn, Oprema: ABS, = Additional Options and Accessories = - EBS (Electronic Braking System) - LED lighting - Air suspension - Disc brakes - Toolbox = Notes = Last stock vehicle!!! -> UNIQUE SUPER SPECIAL PRICE!!!! Internal reference number for customer inquiries: 1-430 Immediately available PAVIC PRSH 27 flatbed semi-trailer with Type 144 pocket and ExTe steel/aluminum telescopic stakes for transporting timber and long materials. * Chassis length approx. 13,510 mm (front frame to front frame) * Chassis width approx. 2,540 mm (outer frame to outer frame) * Ride height unladen approx. 1,400 mm at a fifth wheel height of 1,200 mm * Kingpin load max. approx. 16,000 kg * Front overhang (kingpin to front edge of KoRa) 1,550 mm * 2" kingpin, replaceable from below per SAE standard * Spare wheel holder for 1 spare wheel * 16 stake pockets recessed in outer frame * Including 16 steel/aluminum telescopic stakes, Type 144 (manufacturer: ExTe) * 8 pockets as stowage for insertable stakes, distributed centrally along the entire length * Bulkhead approx. 2,500 mm high, corners angled with sheet metal cladding * Steel floor with 4/6 mm checker plate covering * Outer frame with rounded edges and lashing points approx. every 500 mm * Lift axle on first axle, automatic function, with start-assist * Axle spacing approx. 1,310/1,310 mm * Premium tires 385/65 R 22.5 * EBS braking system with Roll Stability Program * Smartboard/TIM/Infocenter, in addition to H+S valve * LED lighting system * LED work lights * 2x plastic toolboxes Financing through our financing partners possible. Knjdpsyluzfjfx Amheb For further questions, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors, and changes. = Further Information = Tyre size: 385/65-22.5 Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle Gross vehicle weight: 40,000 kg Body manufacturer: PAVIC short timber platform Type 144 General condition: very good Technical condition: very good Visual condition: very good

Stanje: rabljeno, številka stroja/vozila: W09SHL335ATM08351, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.600 mm, širina tovornega prostora: 2.440 mm, višina nakladalnega prostora: 1.700 mm, Leto izdelave: 2010, = Dodatne možnosti in oprema = Kjdezclcbjpfx Amhenb - Zračno vzmetenje zadaj - Zračno vzmetenje spredaj = Dodatne informacije = Teža Nosilnost: 36.000 kg Dovoljena skupna masa: 7.140 kg Stanje Splošno stanje: povprečno Tehnično stanje: povprečno Videz: povprečen Dodatne informacije Stanje pnevmatik spredaj: 40 % Stanje pnevmatik zadaj: 40 % Pnevmatike spredaj: 385/65 R 22.5 Pnevmatike zadaj: 385/65 R 22.5 Zadnji pregled: 2026-06-04 Dodatne informacije Za več informacij se obrnite na Lastas Sales.

Stanje: rabljeno, lastna masa: 12.050 kg, največja dovoljena obremenitev: 32.950 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2015, dolžina tovornega prostora: 14.450 mm, širina tovornega prostora: 2.670 mm, višina nakladalnega prostora: 2.590 mm, skupna dolžina: 2.720 mm, skupna širina: 4.000 mm, skupna višina: 15.500 mm, vzmetenje: zrak, velikost pnevmatike: 425/65R22,5, gradbena višina: 4.000 mm, Oprema: ABS, registracija tovornjaka, Pacton TRD 345 3-axle box trailer | Brakes: disc brakes | Axle type: SAF | Tyres: 425/65R22.5 | Axle 1: Steered, tyre tread left: 7.0 mm, tyre tread right: 15.0 mm | Axle 2: Tyre tread left: 7.0 mm, tyre tread right: 8.0 mm | Axle 3: Steered, tyre tread left: 10.0 mm, tyre tread right: 7.0 mm | Wabco Smartboard | Chassis material: steel | Kingpin size: 2 inch | Central lubrication | ABS, EBS | Subject to errors, input mistakes and prior sale. Ksdpfxezdi Tfs Amhenb

Stanje: rabljeno, največja dovoljena obremenitev: 32.960 kg, skupna masa: 40.000 kg, prva registracija: 11/2017, Interna številka vozila: MK300014 Takoj na voljo na našem dvorišču v Kaufungenu Več informacij na: Ksdjydtydjpfx Amhonb * Golec Nutzfahrzeuge GmbH (nemščina, angleščina, bolgarščina, ruščina) * Viktoria Sologubova (poljščina, ruščina, ukrajinščina, angleščina) Pridržujemo si pravico do napak. Vaše rabljeno vozilo z veseljem vzamemo v račun. Možnost financiranja neposredno pri nas v podjetju. GOLEC NUTZFAHRZEUGE GMBH Govorimo: nemško, angleško, špansko, poljsko, ukrajinsko, rusko, bolgarsko.

Stanje: rabljeno, največja dovoljena obremenitev: 29.700 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2014, naslednji pregled (TÜV): 09/2028, Leto izdelave: 2014, Notranja številka vozila: G400232 Takoj na voljo na našem dvorišču v Kaufungenu. Več informacij: ? Luis Lucena ? Viktoria Sologubova Nemščina Langendorf SKA 24/30 3-osni kipni prikolica | 29.700 kg nosilnosti Naprodaj je rabljena Langendorf SKA 24/30 3-osna kipna prikolica, izdelana leta 2014. Prikolica ponuja visoko nosilnost 29.700 kg pri nizki lastni teži 5.300 kg in je idealna za transport sipkih tovorov. Tehnični podatki: * Proizvajalec/model: Langendorf SKA 24/30 * Vrsta vozila: Kipna prikolica * Prva registracija: 02/2014 * Letnik: 2014 * Osnova: 3 * Dovoljena skupna masa: 35.000 kg * Lastna teža: 5.300 kg * Nosilnost: 29.700 kg * Tehnični pregled: Nov * Številka vozila: G400232 * Stanje: Rabljeno * Nemško vozilo Ogled je možen po predhodnem dogovoru. Dodatne informacije, fotografije in videoposnetke vam bomo z veseljem posredovali na zahtevo. Pridržujemo si pravico do sprememb in napak ter do predhodne prodaje. Angleščina Langendorf SKA 24/30 3-osna kipna prikolica | 29.700 kg nosilnosti Rabljena Langendorf SKA 24/30 3-osna kipna prikolica, izdelana leta 2014. Ta prikolica združuje nizko lastno težo (5.300 kg) z visoko nosilnostjo (29.700 kg) in je idealna za transport sipkih materialov. Tehnični podatki: * Proizvajalec/model: Langendorf SKA 24/30 * Vrsta vozila: Kipna prikolica * Prva registracija: 02/2014 * Letnik: 2014 * Število osi: 3 Kjdezthrropfx Amhjnb * Dovoljena skupna masa: 35.000 kg * Lastna teža: 5.300 kg * Nosilnost: 29.700 kg * Tehnični pregled: Nov * Inventarna številka: G400232 * Stanje: Rabljeno * Nemška prikolica Ogled je možen po predhodnem dogovoru. Dodatne informacije, fotografije in videoposnetke vam bomo z veseljem posredovali na zahtevo. Pridržujemo si pravico do sprememb in napak ter do predhodne prodaje. Pridržujemo si pravico do sprememb in napak. Z veseljem bomo prevzeli vaše rabljeno vozilo. Financiranje je možno neposredno pri nas. GOLEC NUTZFAHRZEUGE GMBH Govorimo: nemščino, angleščino, španščino, poljščino, ukrajinščino, ruščino in bolgarščino.

Stanje: rabljeno, največja dovoljena obremenitev: 18.680 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2014, dolžina tovornega prostora: 6.500 mm, skupna širina: 2.550 mm, skupna višina: 1.150 mm, Oprema: ABS, Kelberg D24B3 3-osni kiper roll-off prikolica Prva registracija: 28-08-2014 Bobnaste zavore z ABS in EBS Serijska številka: SKBD24B31EKE18189 Knedpfx Ajyxa Dajmhob Pnevmatike: 265/70 R19,5 cca 50% BPW Eco Plus osi Dvižna os Zračno vzmetenje Skupna masa: 24.000 kg. Lastna masa: 5.320 kg. Nosilnost: 18.680 kg. Dolžina šasije: 650 cm Zabojniki do 7,00 m Pnevmatsko pritrjevanje zabojnika Pnevmatsko spuščanje vlečne roke za natovarjanje zabojnika s sprednje strani Pridržujemo si pravico do napak ali vmesne prodaje.

Stanje: novo, največja dovoljena obremenitev: 28.620 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prostornina tovornega prostora: 29 m³, skupna dolžina: 9.520 mm, skupna širina: 2.550 mm, skupna višina: 3.270 mm, Leto izdelave: 2026, Oprema: ABS, Reisch 3-osni jekleni prikolica Steelpipe-R HD 29 m³ jeklena okrogla posoda | Hardox 450 | dvižna os | Alcoa Za prodajo je na voljo nova jeklena prikolica Reisch Steelpipe-R HD z okroglo posodo in prostornino 29 m³. Posoda je v celoti izdelana iz jekla Hardox 450 – dno 5 mm, stranske stene 4 mm. Oprema: Reisch Steelpipe-R HD * Prostornina tovora: 29 m³ * Dolžina okvirja: 8.080 mm * Širina vozila: 2.550 mm * Višina sedla: 1.200 mm * Notranja višina prednje stene: 1.650 mm * Prazna teža: približno 6.340 kg * Jekleni okvir MC700 * Šasi prevlečen * Posoda v svetlo srebrni barvi RAL 9006 * Dno iz jekla Hardox 450, 5 mm * Stranske stene iz jekla Hardox 450, 4 mm * Hidravlični cilinder za nagibanje HYVA, 250 bar * Os SAF Intra-CD * Diskovne zavore * 1. os je dvižna * Pnevmatski sistem KNORR * Aluminijasta zračna posoda 120 l * Aluminijasta platišča Alcoa LVL ONE Kjdozuqhxjpfx Amhonb * Pnevmatike Dunlop SP247 385/65 R22.5 * Razsvetljava Aspöck ECO LED III * 2 LED delovni reflektorja zadaj * ABS / EBS * Zračna vzmetenje * Aluminijasta zaščita pod vozilom * Ponjava 650 g/m² v srebrni barvi * Hitro zapiranje ponjave * Metla in lopata Za dodatne informacije smo vam z veseljem na voljo.

Stanje: novo, največja dovoljena obremenitev: 35.585 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 12.950 mm, višina nakladalnega prostora: 1.347 mm, skupna širina: 2.550 mm, Leto izdelave: 2027, Oprema: ABS, 3-osna polprikolica LOGO 14XL posebej zasnovana za terensko in cestno uporabo! * Elektronsko zračno vzmetenje * 3 posamezne preme, znamka SAF, 9 t z diski zavorami * 1. os dvižna, 3. os vodljiva * Daljinsko upravljanje za zaklepanje okvirja in zavoro * Ročno mehansko podpiranje * Podloga: 8x ExTe D7 (poz. 1 z dvojnimi žepi, poz. 2 pomična in z ravnimi žepi za stebričke ter s hitro-zapiralnim klinastim sistemom) * Stebrički: 14x ExTe D7 teleskopski stebrički, 2x ExTe D10 teleskopski stebrički * Pneumatike: 385/65 R 22,5 na jeklenih platiščih * EBS zavorni sistem * LED zadnje luči z integriranim trikotnim odsevnikom * 4x LED delovne luči (1.800 lumnov) * Zračni rezervoar iz aluminija * 1x grabilni kabel * 1x manevrska vlečna sklopka * Okvir + podloga v RAL 9011 antracitno črni barvi * Vsi dodatni deli skladno z EU uredbo Na voljo je različna dodatna oprema. Dodatne informacije na zahtevo. Knjdpfxsgqc Eas Amhjb Slike se lahko razlikujejo od originala. Podatki brez jamstva. Kontakt: Niclas Lott Tel.:

Stanje: rabljeno, največja dovoljena obremenitev: 28.000 kg, skupna masa: 38.500 kg, konfiguracija osi: 3 osi, prva registracija: 03/2018, naslednji pregled (TÜV): 03/2027, dolžina tovornega prostora: 13.480 mm, širina tovornega prostora: 2.540 mm, Oprema: ABS, * 9008 – identifikacijska številka vozila za telefonske povpraševanja * Prikolica z nizko nosilnostjo, tip: MTS-3 * Specialna prikolica z nizko nosilnostjo za transport dvižne ploščadi z odklopnim zadnjim delom * ABS, EBS, osi BPW-Eco-Plus, dvojne pnevmatike, zračno vzmetenje za dvigovanje in spuščanje, 1. os je dvigljiva, 3. os s trenjalnim zgibom in dodatnim krmiljenjem * Vratna prikolica, sprednja stena, pritrdilne točke, škatle za shranjevanje * 24 V električna črpalka, priključena preko vtičnice NATO * električni vitel * brezžični daljinski upravljalnik za vitel in hidravliko * hidravlično dvigljiva in spuščana nakladalna površina na zadnjem delu, hidravlično izvlečna rampa Kodpfx Amey I Iahohenb * hidravlično dvigljiva rampa na krivini * rešetkasta površina po celotni nakladalni površini * tehnično dovoljena skupna masa: 41.500 kg * pnevmatike 1. osi: 235/75R17,5 (6 / 8 / 11 / 11 mm) * pnevmatike 2. osi: 235/75R17,5 (9 / 9 / 9 / 9 mm) * pnevmatike 3. osi: 235/75R17,5 (11 / 11 / 9 / 9 mm) ----naš e-poštni naslov: naša storitev za vas: - ureditev začasnih ali carinskih registrskih tablic - prevoz / dostava po vsej Evropski uniji - carinski postopki za vozila, ki se izvažajo v tretjo državo Whatsapp za angleščino, nemščino, ruščino in druge jezike:

Stanje: rabljeno, največja dovoljena obremenitev: 18.200 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2010, dolžina tovornega prostora: 8.170 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.150 mm, prostornina tovornega prostora: 43 m³, Oprema: ABS, * 1988 – identifikacijska številka vozila za telefonske povpraševanja * Tip: AFG 24 * ABS, osi SAF, kolutne zavore, zračna vzmet (dvigovanje in spuščanje), portalna vrata, stranska vrata na desni strani tovornega prostora (trajno privita), 2x luč, pritrdilne letve na bočnih stenah in podu/stropu * Pnevmatike 1. os: 385/65R22,5 (14 / 10 mm) * Pnevmatike 2. os: 385/65R22,5 (8 / 11 mm) * Pnevmatike 3. os: 385/65R22,5 (12 / 11 mm) ----naš e-poštni naslov: Knjdsx Egnpjpfx Amheb     naša storitev za vas:       - ureditev začasnih ali carinskih registrskih tablic       - prevoz / dostava po vsej EU       - carinski postopki za vozila, ki se izvažajo v tretjo državo WhatsApp za angleščino, nemščino, ruščino in druge jezike:

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902036561, lastna masa: 5.820 kg, največja dovoljena obremenitev: 29.180 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2025, naslednji pregled (TÜV): 04/2026, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.740 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", stanje pnevmatik: 90 odstotek, barva: rdeča, Na slikah so arhivske fotografije! Vozilo je po potrebi v uporabi! #Šasi, sedelna prikolica Jeklena konstrukcija iz fino zrnatega jekla, varjena, lahka zasnova, sedelna plošča z zamenljivim 2-palčnim kraljevskim čepom Zunanji okvir, rahlo nagnjen, nova izvedba z "profilom za pritrditev trakov" za pritrditev zategovalnih trakov 3 pari pritrdilnih točk, dodatno vgrajenih v zunanji okvir, po 2,5 tone 14 parov pritrdilnih točk, dodatno vgrajenih v zunanji okvir, po 2,5 tone 24 ton. Dvo-stopenjska oporna vijačna opora, upravljanje z ene strani, z ravnim spodnjim delom, s kompenzacijo potiska Proizvajalec: SAF Opomba: Prosti kot opornih nog oziroma prosti radij gibanja nazaj je približno 1930 mm Izvlečna lestev na zadnji strani Stranski držalo vrat 2 podstavka s držalom Stranski zaščitni okvir iz aluminija barvan v RAL 3002, karminsko rdečo Brez garancije za prevleko/barvanje pri prebarvanih obdelanih dodatnih delih. Podvozni zaščitni okvir, pocinkan jeklo barvan v RAL 9010, čisto belo, tudi držalo podvoznega zaščitnega okvirja Brez garancije za prevleko/barvanje pri prebarvanih obdelanih dodatnih delih. Polovični blatniki spredaj in za osjo z zaščito proti brizganju v skladu z evropskimi predpisi Zadnji zaščitni okvir 1 aluminijasta lestev, približno 2550 mm, z držalom na strani, za stranskim zaščitnim okvirjem Pritrdilna letev na zunanjem okviru za pritrditev direktnih zategovalnih trakov za ponjavo, v vijačni izvedbi, približno 15–20 mm nad tovorno površino, z zgornjim profilom z luknjami za pritrditev zategovalnih trakov 2 plastični orodjarni kovček, š=800/v=450/g=450 mm vsak po 1 na levi in desni strani, za 3. osjo #Osi in vzmetenje BPW osi s kolutnimi zavorami s 430 mm premerom koluta Pestnice, barvane v RAL 3002, karminsko rdečo "Laserjev merski sistem osi/podvozja", zmanjšanje obrabe pnevmatik in porabe goriva Zračno vzmetenje #Zavorni sistem Dvo-vodni zračni zavorni sistem Barvno kodirana vodila za enostavno vzdrževanje. Zavora z vzmetjo 2 varnostna vtičnica spredaj, ki se ne moreta zamenjati, brez povezovalnega kabla 24-voltni EBS sistem, proizvajalec Wabco, elektronski zavorni sistem z EBS vtičnico spredaj, brez povezovalnega kabla Pozor: Prikolico lahko vlečejo samo vlečna vozila, ki zagotavljajo učinkovitost ABS! z ventilom za dvigovanje in spuščanje + funkcijo samodejnega ponastavitve Vozilo – sistem za stabilnost vožnje Telematika, vključno z LIN akumulatorjem, senzorjem za povezavo in sledilnikom Ksdjxbzkkepfx Amhjnb #Kolesa in pnevmatike 385/65 R22.5", proizvajalec po izbiri Aluminijasta platišča, polirana, proizvajalec Alcoa Dura-Bright #Elektrika 24 voltov, večprekatne luči, stranska rumena LED osvetlitev Nosilec luči, barvan v RAL 9010, čisto belo Brez garancije za prevleko/barvanje pri prebarvanih obdelanih dodatnih delih. 2 beli pozicijski luči spredaj 2 belo/rdeči luči za ohranjanje voznega pasu zadaj 2 x 7-polne in 1 x 15-polna varnostna vtičnica spredaj LED delovna luč na strani, na obeh straneh nameščena v višini prvega prečnega nosilca za opornimi nogami 2 dodatni LED delovni luči, na zadnji strani #Ponjava Ponjava z varjenimi horizontalnimi in vertikalnimi trakovi Na slikah so arhivske fotografije! Vozilo je po potrebi v uporabi!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 3.900 kg, največja dovoljena obremenitev: 20.100 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 9.200 mm, skupna širina: 2.550 mm, skupna višina: 1.180 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R22,5", stanje pnevmatik: 100 odstotek, barva: originalen, Leto izdelave: 2026, Prilagojena transportna rešitev Konfigurirajte svoje vozilo Fliegl glede na vaše zahteve. Prikazano vozilo je samo primer. Proizvodnja in oprema potekata individualno glede na želje stranke. #Podvozje, vrtljiva plošča Finozrnato jeklo, varjena konstrukcija Opora spredaj, nastavljiva in zložljiva v vzdolžni smeri 2 para vodilnih valjev, odstranljivih, spredaj in zadaj 4 zaklepne naprave za kontejnerje s stabilnimi nosilci na osnovi 20", za zamenljive kontejnerje 7,15 in 7,45 Vrtljiva plošča z močnim obročem krogličnih ležajev 2 klini za podpiranje z držalom Stranski zaščitni element iz aluminija Podvozni zaščitni element iz jekla Polovični blatniki spredaj in polovični blatniki zadaj 2 škatli za orodje iz nerjavečega jekla, š=600/v=400/g=500 mm, s poliranimi vrati, ki se zaklenjujejo 1 par opozorilnih tablic z dvojno LED osvetlitvijo, raztegljivih na 3.000 mm zadaj, samo zadaj 1 priprava za vtič za poznejšo namestitev opozorilnih tablic spredaj s strani stranke #Naprava za priklop, vrtljiva plošča prikolice Prijemna vilica z odobreno 40 mm prijemno kljuko Prijemna vilica je mehansko nastavljiva za 6 x 100 mm v vzdolžni smeri in se lahko zaklene (dolžina prijemne vilice približno 1.900 - 2.500 mm) Nastavitev višine prijemne vilice prek vzmeti #Osi + vzmetenje BPW osi z diskovimi zavorami s premerom diska 430 mm "Laserjev meritev osi/podvozja" za zmanjšanje obrabe pnevmatik in porabe goriva Zračno vzmetenje z ventilom za dvigovanje in spuščanje #Kolesa in pnevmatike 385/55 R22,5", po izbiri proizvajalca Jeklena platišča v tovarniški srebrni barvi #Zavorna naprava Zavorna naprava na stisnjen zrak z dvema vodiloma Zavora za parkiranje s pomnilnikom vzmeti 2 vtičnice za priklop, ki se ne moreta zamenjati, spredaj, s povezovalnimi cevmi do vlečne enote EBS, elektronski zavorni sistem z vtičnico EBS spredaj, s povezovalnim kablom Pozor: Prikolico sme vleči samo vlečna enota, ki zagotavlja delovanje ABS! #Elektrika 24 voltov, večprekatne luči, stranska rumena LED osvetlitev Kjdpfx Amszndmzehjnb 2 beli pozicijski svetili spredaj 2 bela/rdeča svetila za označevanje robov zadaj Vrteča luč, odstranljiva 1 dodatni LED delovni reflektor, zadaj, priključen na vzvratno luč 2 LED delovna reflektorja na obeh straneh (1x levo, 1x desno), priključen na vzvratno luč 1 x 15-polni vtič spredaj, s povezovalnim kablom #Država registracije / označbe Država registracije: Nemčija z odobritvijo Dekra in potrdilom (po §13 EG - FGV) 24/7 služba za pomoč pripravljeno za držalo za registrsko tablico, enovrstično Konturna označba z odsevnim trakom po ECE R 048, stransko bela in zadaj rdeča #Barvanje Okvir: Vroče pocinkano, vključno s pasiviranjem "15 let garancije proti prebijanju rje" Prijemna vilica: KTL črna Pozor: Arhivske slike!

Stanje: rabljeno, največja dovoljena obremenitev: 26.760 kg, skupna masa: 34.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2012, naslednji pregled (TÜV): 08/2012, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 2.800 mm, Leto izdelave: 2012, Oprema: ABS, Prva roka Avstrija, vrhunsko stanje. Protiutež za vlečni viličar spredaj pri čelni steni (glej fotografijo). Fiksna aluminijasta streha, nalagalne palice, tovorni sistem, dvigalna os z zračno vzmetenjem. Ksdpfsyd Tawex Amhenb

Stanje: rabljeno, lastna masa: 6.000 kg, največja dovoljena obremenitev: 33.000 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2019, dolžina tovornega prostora: 13.000 mm, širina tovornega prostora: 2.330 mm, višina nakladalnega prostora: 1 mm, vzmetenje: zrak, velikost pnevmatike: 385/65R22.5, barva: črn, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Lokacija vozila: Bovenden, 3 osi, SAF osi, zračno vzmetenje, 1. os dvižna, dviganje + spuščanje, ABS (protiblokirni sistem), stranska zaščita, stranska alu zaščita, podporniki, zaboj za orodje, stebri. Kjdpfxswkvqae Amhjnb Nadgradnja: 3-osna polprikolica za prevoz lesa s 6 pari Ecco Steel nosilcev stebrov, 3x 9 t SAF osi, kolutne zavore, prva os dvižna, zamenljiv 2" kraljevski zatič, višina priklopa neobremenjen pribl. 1150 mm, najmanj 2240 mm prostega sprednjega odmika od sredine priklopnika, lahki okvir iz visoko trdnostnega drobnozrnatega jekla. Višina nakladanja pribl. 1540 mm! Večkrat na zalogi iz stečajne mase! PODATKI O DODATNI OPREMI BREZ GARANCIJE, pridržujemo si pravico do sprememb, vmesne prodaje ali napak!

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 02/2018, dolžina tovornega prostora: 6.060 mm, širina tovornega prostora: 2.200 mm, višina nakladalnega prostora: 300 mm, Errors and prior sale excepted! Internal number: 1448. EQUIPMENT * Flatbed trailer * 3 axles * Jockey wheel * AL-KO coupling Knedpfx Aovwh U Ssmheb * Side planks all around ... and much more. ----The vehicle is offered in unrefurbished condition! Nationwide delivery available for an additional charge. Errors and prior sale excepted. We are happy to take your vehicle in trade-in. Financing / leasing possible even without down payment! Do you have further questions? We are happy to advise you!

Stanje: rabljeno, največja dovoljena obremenitev: 25.620 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2012, dolžina tovornega prostora: 13.350 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.120 mm, prostornina tovornega prostora: 70 m³, skupna širina: 2.550 mm, skupna višina: 3.750 mm, Leto izdelave: 2012, Oprema: ABS, * Sistem dvižne stene Ewers * Mere tovornega prostora: 13.350 x 2.480 x 2.120 mm Kedpfszlvzrsx Amhjnb * 2.500 kg dvižna platforma Dautel * 4 vrste pritrdil za tovor * Certificirano po standardu Dekra * Sistem usmerjanja Trideck * Škatla za dvižni voziček * Oske MB * Kolutne zavore * Zračno vzmetenje * Pritrdilne zanke na zunanjem okvirju

Stanje: novo, lastna masa: 10.700 kg, največja dovoljena obremenitev: 38.800 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r 17,5, barva: sivo-črna, Oprema: ABS, Gooseneck: • Gooseneck with front corners beveled at 45° and rear taper approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood flooring Extendable loading platform: • Loading platform in extendable design with rear taper approx. 1,000 mm x 8° • Cut-outs in outer frame of loading platform for attaching tensioning straps • Approx. 48 mm thick hardwood flooring; anti-slip checker plate covering above the axles Two-piece steel ramps: • One pair of galvanized, two-piece steel ramps with approx. 48 mm thick hardwood covering • Ramps with hydraulically foldable ramp sections, hydraulic lift system, and hydraulically adjustable • Maximum load per pair: approx. 40,000 kg Axles and tires: • BPW axles and suspension, 2 rigid axles, 1 self-steering axle • Technical axle load: 12,000 kg • Electromagnetic reverse lock, activated via reverse gear or manually • Air suspension with lift and lower valve • Axle tools • 235/75 R 17.5 3PMSF Braking system: • WABCO braking system according to EU regulations with EBS-E Paintwork: • First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by two-component zinc dust primer Knedjhlz S Nopfx Amhsb • High-quality, single-color top coat in MB 7350 Novagrey applied with two-component paint • Rear section metallized and painted in RAL 9010 Landing legs: • JOST landing legs with 2-speed gearbox for 24t lifting load (50t test load) Steel construction: • Steel construction made of high-strength fine-grain steels • Steel grades: • S355J2+N/S355MC • S690QL/S700MC Electrical system: • Electrical system in accordance with EU regulations, 24 Volt lighting • ASPÖCK-UNIBOX on front connection panel with 24N, 24S & 15-pin sockets Accessories included: • One spare wheel with holder • Galvanized steel front wall approx. 400 mm high • Yellow-red air couplings on the galvanized front connection panel • 4 wheel chocks • Rear mounting bracket for beacon light at the end of the semitrailer • Recess at rear of gooseneck for ALU approach ramps • Galvanized folding supports under the loading platform taper • Cover plates to bridge the gap between ramps and loading platform • White reflector tape per EU regulations on sides, extension, and red at rear • Electro-hydraulic unit at rear, under the loading platform • On gooseneck and ramps, left and right, each with a holder for warning signs, including socket • Operating valves for the ramps located on the right side of the trailer • ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm • The rear, galvanized plug-in stanchions are removable (superstructure length approx. 2,560 mm) • Four warning panels extendable by approx. 400 mm with a position light • 3 pairs of WADER container pockets in the loading platform for one 20ft, 30ft or 40ft container • 6 pairs of stanchion pockets (100x50 mm) in the outer frame of the loading platform • Galvanized extensions, extendable by approx. 230 mm per side • 20 x 20 mm square climbing strips every 200 mm on the outer frame of the platform taper • Painted anti-slip sand layer on checker plates, above king pin and loading platform • Load gauge for axle load measurement, including load diagram • HRM metallization (High Resistance Metallisation) of the outer frame • Complete steel construction shot-blasted, then defined visible surfaces metallized and hot-finished with ZINACOR 850 (Zinc 85% - Alu 15%)

Stanje: novo, lastna masa: 15.550 kg, največja dovoljena obremenitev: 47.450 kg, skupna masa: 63.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimization of loading platform length, length approx. 3,700 mm - Rear gooseneck with bevel approx. 1,000 mm x 10° Loading Platform: - Extendable loading platform, length approx. 8,800 mm, with rear bevel approx. 500 mm x 10° - A recess in the loading platform as well as into the bevel for accommodating the excavator dipper stick - Pneumatic locking with conical locking bolts and reinforced lock positions - Hardwood covering on the loading platform bevel Ramps: - 1 pair of two-piece steel ramps with a length of approx. 4,350 mm and a width of approx. 900 mm - Ramps with hardwood covering - Hydraulically folding ramp tips - Ramps can be hydraulically shifted individually approx. 235 mm outward and approx. 215 mm inward - Square climbing cleats 20 x 30 mm, approx. every 200 mm on the outer frame of the ramp Axles and Suspension: - BPW axles and suspension, 1st axle lift-steered, all other axles forced-steered with hydromechanical system - Technical axle load: 12,000 kg - 1st axle with electromagnetic reversing lock, activated via reverse gear and manually - Air suspension with raising and lowering valve - Tyres 235/75 R 17.5, twin tires - TPMS tire monitoring system compliant with ECE R141 - TPMS sensors installed in all wheels including spares Accessories included: - Removable steel front wall, approx. 400 mm high - 3kW electro-hydraulic power pack for hydraulic operations, excluding hydraulic winches - Parking position on gooseneck for warning boards when not in use - 1 spare wheel - On the gooseneck: 1 pair of removable side aluminium drop sides, approx. 400 mm high, anodised - On the gooseneck: 1 removable rear aluminium drop side, approx. 400 mm high, anodised Kodpfx Amok Aht Uehsnb - Above the gooseneck: approx. 40 mm thick hardwood floor, chequer plate above king pin - 2" king pin - Guide plate on gooseneck for fifth wheel, approx. 500 mm wide - 4 wheel chocks - Mechanical landing gear with 2-speed gearbox and crank - JOST Modul B – static test load = 50,000 kg - 1 intermediate table, approx. 300 mm wide - Extensions (galvanised) extendable by approx. 230 mm per side - Wheel recesses with square climbing cleats - ALU covers for the wheel recesses - 1 pair of mechanical rear supports - Remote steering at front and rear via cable remote control, with single track monitoring of axles - 1st axle with automatic lift axle function - Central lubrication system with 1 BEKAMAX brand pump - Radio remote control for remote steering, additionally to cable remote, with 2 indicator lights on the receiver as single track monitoring - Wabco Smart Board System - 4 warning boards, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and brackets for revolving beacon

Stanje: novo, lastna masa: 8.300 kg, največja dovoljena obremenitev: 36.700 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 1.080 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22.5, barva: siv, Oprema: ABS, dvižna zadnja plošča, Loading platform: Loading platform in extendable design with pneumatically operated locking mechanism Cutouts in the outer frame of the loading platform for attaching lashing straps Landing legs: JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity Axles and tires: BPW axles, air-suspended, with disc brakes (430 mm), with lift/lower function Trailing steering axle with electromagnetic reverse lock, activated via reverse gear or manually Axle tools Tires 385/65 R 22.5 Braking system: WABCO braking system in accordance with EU regulations with EBS-E Paintwork: Premium and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer A high-quality single-color 2-component topcoat in MB 7350 Novagrau Rear section metallized and painted in RAL 9010 No metallic paint available Steel construction: Steel construction made of high-strength fine-grained steels Steel grades: S355J2+N / S355MC S690QL / S700MC Electrical system: Electrical system in accordance with EU regulations Lighting: 24 Volt ASPÖCK-NORDIK ASPÖCK-UNIBOX at the front connection bar with 24N, 24S and 15-pin sockets Kedpfx Asikyh Homhonb Connection according to ISO Accessories included: Front galvanized connection bar with yellow-red air couplings One galvanized steel front wall approx. 1,600 mm high, EN12642-XL 4 wheel chocks with holders White reflector tape according to EU regulations on the sides, on the extension, and in red at the rear European reflective plates at the rear of the trailer Loading platform with approx. 30 mm thick hardwood floor enclosed in omega profiles 10 pairs of stake pockets for insertable stakes 100 x 50 mm in the outer frame of the loading platform 1 spare wheel holder under the loading platform, right-hand side in the direction of travel Manual and description One holder for a rotating beacon at the rear of the trailer On the gooseneck and each side of the rear plate (left and right), a bracket for warning panels incl. socket Anti-slip sand layer painted onto the central beam 6 pairs of WADER container pockets in the loading platform, for 1x 20ft container, 2x 20ft containers, or 1x 40ft container; the extension includes an additional locking point for one 45ft container 4 pairs of transverse stake pocket rails mounted in the loading platform for plug-in stakes 100 x 50 mm One galvanized holder transversely under the loading platform, 2,390 x 720 x 400 mm Access ladder mounted right-hand side in direction of travel Front axle lift axle with control via TEBS E depending on current axle load and load status Load manometer for determining axle loads, including load chart HRM metallization of the outer frame: complete steel structure shot-blasted, then the defined visible surfaces metallized hot-finished with ZINACOR 850

Stanje: novo, lastna masa: 10.600 kg, največja dovoljena obremenitev: 35.400 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 940 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Loading area: - Loading deck in extendable design - Loading deck with hardwood planks, rear bevel approx. 500 mm x 8° - 2 pairs of lashing rings (LC 5,000 daN) - 1 pair of lashing rings (LC 10,000 daN) Kedel Ux Rwepfx Amhsnb - 6 pairs of outward-folding lashing rings (LC 5,000 daN) - 3 pairs of outward-folding lashing rings (LC 10,000 daN) - Cut-outs in the loading deck's external frame for attaching tension belts Braking system: - Braking system in accordance with EU regulations, with EBS-E (2S2M) Painting: - First-class, durable corrosion protection for the standard shot-blasted welded frame guaranteed by a two-component (2K) zinc-rich primer - High-quality two-component (2K) top coat in solid Novagrey - Rear section metallised and painted in RAL 9010 (pure white) - Metallic paint not available Landing gear: - JOST mechanical landing gear with 2-speed gearbox, 24t lifting capacity (test load 50t) Steel construction: - Steel structure made from high-strength fine grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system according to EU regulations, LED lighting 24 Volt - Sockets: 2x 7-pin & 15-pin Axles and tyres: - BPW axles, air suspended, with disc brakes (377 mm), with lifting/lowering function - Hydro-mechanically forced steering - Axle tools - Twin tyres 235/75 R 17.5 Accessories included: - Yellow-red air couplings at the galvanised front connection bar - 4 wheel chocks with holder - 2" king pin - Galvanised steel headboard approx. 1600 mm high - White reflective tape on the sides, sliding section and rear in red in accordance with EU regulations - Loading deck with heavy-duty hardwood floor - Rear and front steering by cable - Remote control via push buttons, with single-track monitoring of the axles - With wireless remote control for rear steering - 9 pairs of stake pockets for 100 x 50 mm plug-in stakes on the outer frame of the loading deck - Galvanised folding supports under the loading deck bevel - Sliding mounting rail for aluminium loading ramps at the rear of the vehicle - European reflective panels (red-yellow) at the trailer rear - One mud flap at the trailer rear - Mount for a beacon at the trailer rear - Mounts for warning boards including socket on gooseneck and rear panel, each left and right - Stainless steel toolbox INOX 1,500 x 390 x 810 under the loading deck, right side in driving direction - Central lubrication system BEKAMAX (Pico) with NLHI-2 multipurpose grease and removable protection around pump - 6 pairs of WADER container locks on the loading deck for 1x 20ft, 2x 20ft or 1x 40ft containers, additional locking for one 45ft container in extendable section - 4 pairs of crosswise stake pocket strips mounted in the loading area for 100 x 50 mm plug-in stakes - Lift axle on the first axle, controlled by TEBS, dependent on current axle load and load condition - 80 km/h speed stickers at the rear and on both sides - Four extendable warning boards ca. 400 mm (approx. 423 x 423 mm) with LED position light - Beacon mount on the warning boards - Load gauge for axle load determination, including load diagram - HRM metallisation (High Resistance Metallisation) on the external frame - Complete steel construction shot-blasted, then all defined visible areas metallised with ZINACOR 850 (85% zinc, 15% aluminium) by thermal spraying

Stanje: novo, lastna masa: 10.000 kg, največja dovoljena obremenitev: 41.600 kg, skupna masa: 51.600 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Loading Platform: - Gooseneck, length approx. 4,100 mm with central beam - Extendable loading platform, length approx. 9,500 mm with rear taper approx. 350 mm x 10° and integrated hook-on bar for attaching loose ALU approach ramps - Pneumatic locking system with conical locking bolts and reinforced locking positions - Supply lines are protected inside the extendable beams and automatically adjust to the respective platform length Knsdoiuy Nlepfx Amhjb Axles, Suspension, and Tyres: - BPW axles and suspension, all axles hydro-mechanically forced steered - Mounted on turntable - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Tyres 235/75 R17.5, twin-mounted Paintwork: - 6-coat surface treatment - Complete steel structure shot-blasted after welding - One coat of zinc-based primer, one coat of adhesion primer - Final paintwork with 2 layers of 2-component (acrylic) paint, single colour in MB 7350 Novagrau, followed by cavity sealing with special wax Steel Structure: - Steel structure made from high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355MPa) - S690QL/S700MC (yield strength 690MPa) - Welders certified according to DIN-EN 287-1 - Welding process MAG according to EN ISO 4063, shielding gas M21 according to EN ISO 14175 Accessories: - Steel front wall, approx. 1,600 mm high - Round NATO socket at the front connection strip - 3 kW electro-hydraulic unit for controlling hydraulic functions - 4 pairs of recessed lashing rings in the outer frame of the gooseneck - 4 pairs of stake pockets integrated into the outer frame of the gooseneck for stakes approx. 100x50 mm - 1 transverse stake pocket strip mounted in the floor of the gooseneck for stakes approx. 100x50 mm (1x rear on gooseneck) - 2'' kingpin - Mechanical landing legs with 2-speed gearbox and hand crank - JOST Module B – static test load = 50,000 kg - On the gooseneck and loading area, approx. 32 mm wooden flooring in ALU-omega profiles - One locking position on the extension, approx. every 500 mm - 10 pairs of recessed folding lashing rings in the outer frame of the loading area, folding outwards - 6 pairs of stake pockets integrated into the outer frame of the loading area for stakes approx. 100x50 mm - 2 transverse stake pocket strips mounted in the floor of the loading area for stakes approx. 100x50 mm - INOX toolbox approx. 1,250 x 500 x 550 mm - Tapered end crossmember of the vehicle, approx. 350 mm 10° - Integrated hook-on bar for loose ALU approach ramps at the rear crossmember of the vehicle - 1 pair of drop tube supports at the rear crossmember - Mudguards on all axles - Central lubrication system with 1 pump - Remote steering from front and rear operable via cable remote control with push button, including single-track monitoring of the axles - Under the gooseneck and at the rear crossmember, left and right, each with a 7-pin socket for warning panels - One 7-pin socket at the rear crossmember - Container locks "TWIST-LOCKS" in the loading area for transport of 2x 20ft and 1x 40ft containers - Radio remote control for rear steering in addition to cable remote control, with 2 indicator lights on the receiver for single-track monitoring - 2 axle load gauges + axle load diagram - 4 warning panels approx. 423 x 423 mm, extendable by approx. 400 mm - Standard HRM Metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible areas hot-coated in metallic finish using ZIN

Stanje: novo, lastna masa: 11.300 kg, največja dovoljena obremenitev: 36.700 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 1.250 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 r 22,5, barva: sivo-črna, Oprema: ABS, Loading platform: Loading platform in extendable design with pneumatically operated locking mechanism A fixed intermediate table, approx. 250 mm wide, is mounted on the central beam 8 pairs of lashing rings, foldable outwards (LC 5,000 daN) 3 pairs of lashing rings, foldable outwards (LC 10,000 daN) Openings in the outer frame of the loading platform for attaching tensioning straps (LC 2,000 daN) Axles and tyres: BPW axles and suspension, all axles with hydro-mechanical forced steering Disc brakes, technical axle load: 10,000 kg Air suspension with lift and lower valve Axle tools 6 tyres, size 385/65 R 22.5 Brake system: Brake system according to EU regulations with EBS-E (2S2M) Landing gear: JOST landing legs (mechanically operated) with 2-speed gearbox for 24 t lift load (50 t test load) Steel construction: Steel construction made of high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical system: Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX mounted on the front terminal board with 24N, 24S & 15-pin sockets Connections according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paintwork: First-class, long-lasting corrosion protection of the standard grit-blasted welded frame, guaranteed by a 2-component (2K) zinc-dust primer High-quality, single-colour 2-component (2K) top coat in Novagrau Rear section metallised and painted in RAL 9010 (pure white) No metallic paint finish possible Included accessories: At the gooseneck and at the rear plate, left and right, each with a bracket for warning signs, including socket Remote steering from the front and rear via cable remote control with push buttons, with single-track control of the axles Electro-hydraulic unit 4 wheel chocks with brackets on the front wall 2" kingpin A galvanised steel front wall approx. 2,200 mm high Yellow-red air couplings on the galvanised front terminal board White reflective tape on the side, at the extension and rear in accordance with EU regulations, red at the rear European reflective plates (red-yellow) on the rear of the trailer One mud flap on the rear of the trailer Manual and documentation Bracket for a revolving warning light at the rear of the trailer Loading platform with approx. 30 mm thick wooden floor set in omega profiles 10 pairs of stake pockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading platform 1 spare wheel holder under the loading platform on the right-hand side in the driving direction 6 pairs of WADER container locks in the loading platform, for 1x 20ft container, 2x 20ft containers or 1x 40ft container; in the extension, an additional locking position is provided for a 45ft container 5 pairs of stake pocket strips, mounted transversely in the loading platform, for plug-in stanchions 100 x 50 mm A galvanised bracket mounted transversely under the loading platform (2,390 x 720 x 400 mm) Access ladder mounted on the right in the direction of travel One HDPE toolbox 1,200x500x480 mounted at the front under the loading platform on the left in the direction of travel Lift axle on the front axle with control via TEBS E depending on the current axle load and loading status Central lubrication system with 2 BEKAMAX (Pico) pumps with standard grease NLGI-2 and removable protection around the pump Knjdpfx Amjhlz Shjheb Red/white reflective tape on the extension of the loading platform On the central beam,

Stanje: novo, največja dovoljena obremenitev: 36.020 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 435/50 R 19.5, barva: siv, Oprema: ABS, Loading platform: - Loading platform in extendable design with pneumatically operated locking mechanism - 2 pairs of lashing rings (LC 5,000 daN) - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of fold-out lashing rings (LC 5,000 daN) - 2 pairs of fold-out lashing rings (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for attaching tension belts Axles and tires: - BPW axles, air-suspended, with disc brakes (377 mm), equipped with lifting/lowering function - Self-steering axles with electromagnetically controlled reverse lock, activated via reverse gear or manually - Axle tools - Tires: 435/50 R 19.5 Brake system: - Brake system in accordance with EU regulations with EBS-E (2S2M) Ksdji Dwlwepfx Amhenb Paintwork: - Premium, durable corrosion protection for the standard shot-blasted welded frame by means of two-component (2K) zinc dust primer - High-quality two-component (2K) top coat in solid Novagrau - Rear end metallized and painted in RAL 9010 (pure white) - Metallic paint not available Landing gear: - JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Steel construction: - Steel structure made of high-strength fine-grained steels. - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system according to EU regulations, 24 Volt ASPÖCK-NORDICK (ASS3) lighting - ASPÖCK-UNIBOX on the front connection console with 24N, 24S & 15-pin sockets - Connections according to ISO standards: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Accessories included: - Yellow-red air couplings at the galvanized front connection strip - 2 wheel chocks with holder - 2" kingpin - A galvanized steel front wall approx. 1,600 mm high - Yellow reflective tape as per EU regulations, on the sides, on the extension and at the rear of the trailer - European reflective signs (red-yellow) at the rear of the trailer - Loading area with approx. 38 mm thick hardwood floor - 10 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame of the platform - 1 spare wheel holder beneath the loading area on the right in the direction of travel - User manual and documentation on USB stick - One mudflap at the rear of the trailer - Bracket for a revolving beacon at the rear of the trailer - On the gooseneck and on the rear panel, left and right, each a bracket for warning boards including socket - One INOX toolbox transversely mounted beneath the platform (1,000x400x2,500mm) - 6 pairs of WADER container locks in the platform for 1x 20ft container, 2x 20ft containers or 1x 40ft container; an additional locking point is provided in the extension for a 45ft container - 3 sets of crosswise post pocket bars mounted in the platform for 100 x 50 mm plug-in posts - 60 km/h speed sticker on the rear - 2 reversing spotlights mounted on the rear panel - Four warning signs approx. 423 x 423 mm, extendable by approx. 400 mm, with a position light - Mounting bracket for rotating beacon on the warning sign - HRM metallization (High Resistance Metallisation) of the outer frame - Entire steel structure shot-blasted, the defined visible surfaces then hot-finished with ZINACOR 850 metallisation (zinc 85% - aluminum 15%)

Stanje: novo, lastna masa: 11.000 kg, največja dovoljena obremenitev: 38.500 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm hardwood flooring Load Area: - Extendable loading area with rear taper approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm - Wheel recesses fitted with square climbing strips 15 x 15 mm, including lower extensions - Between the 1st and 2nd axle, a pair of fixed wheel recesses with cover, approx. 1,610 x 970 x 400 mm - Recess in the bevel as well as protruding into the loading area for parking excavator dipper stick approx. 2,900 x 750 x 210/290 mm - 1 pair of lashing rings, installed flat at the front of the load area (LC 10,000 daN) - 5 pairs of folding lashing rings on the outside (LC 5,000 daN) - 2 pairs of folding lashing rings on the outside (LC 10,000 daN) - 2 pairs of lashing rings in the dipper stick recess (LC 5,000 daN) - Cut-outs in the outer frame of the load area for securing straps (LC 2,000 daN) - Incl. three-part removable galvanized covers over the wheel recesses – max. point load 3.5 t / pc. Ksdpfx Ajup U Hzjmhenb Two-piece Steel Ramps: - One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood surfacing - Ramp with hydraulically folding ramp sections, hydraulic lifting gear, and hydraulically adjustable Axles and Tyres: - BPW axles and suspension, 2 rigid axles, 1 steering trailing axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lifting and lowering valve - Axle tool kit - Tyres 235/75 R 17.5 - TPMS tyre pressure monitoring system in accordance with ECE R 141 Accessories Included: - Mounts for warning signs left and right at the gooseneck and at the rear, each with socket - One spare wheel - 2" king pin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings at the galvanized front connector strip - 4 wheel chocks - Galvanized, extendable outriggers approx. 230 mm per side - Galvanized folding supports beneath the loading area bevel - Rear trailer bracket for rotating beacon - Cover plates for bridging the gap between ramps and load area - White reflective tape to EU regulations, sides and on extensions; rear in red - Electro-hydraulic unit installed at the rear beneath the loading area - Ramp control valves mounted on right trailer side - European reflective panels (red-yellow) on rear of trailer - Four extendable warning boards, approx. 423 x 423 mm, with position light - Bracket for rotating beacon on warning boards - Removable ALU side boards and rear board on gooseneck approx. 2,440 x 400 mm - Rear galvanized removable stakes (structure length approx. 2,560 mm) - 2 pairs of WADER container pockets in loading area for 20ft or 30ft container - 3 pairs of socket pockets for stakes 100 x 50 mm in outer frame of loading area - Removable, galvanized intermediate table with 1 pair of WADER container pockets - Square climbing strips 20 x 20 mm spaced every 200 mm on outer frame at loading bevelling - Painted sand layer on chequer plates of the gooseneck and loading area for anti-slip protection - 80 km/h speed stickers rear and both sides - Load manometer for axle load measurement, including load chart.