Unsinn Gtp Multitransporter Mit Rampen nakup rabljenega (8.989)

Stanje: novo, največja dovoljena obremenitev: 16.000 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2024, * KA-TA-RT 21.0 ML: * Without ABS / EBS, approved for 40 km/h * Spring-loaded parking brake, drum brakes * Gigant axles * Tandem compensating aggregate with 100 mm wide parabolic springs * Support windlass at the front * Mechanical drop-down supports at the rear * Fixed welded drawbar with low-maintenance K80 ball coupling (offset by +77 mm / 33 mm adjustable via head plate) with elevated gantry for connection lines * 12 V 7 + 4 pole electrical wiring * LED lighting system 12 / 24 V with protective grille * 2 LED work lights at the rear, switchable from towing vehicle without vehicle-side installation * Side marker lights with indicator control * Plastic quarter mudguards * Plastic toolbox approx. 750 x 350 x 300 mm, right side * Chassis made of fine-grain steel * Steel Pal.- three-way tipper body with M-Strong side walls (fixed front wall, continuous side walls without central stanchions, swinging via manual central locking and mechanically foldable with side wall spring lifter * Hydraulic tailgate, 500 mm high, acts as a hydraulic chute with a 115° opening angle * 4 mm Hardox 450 steel floor * In each corner 1 x 7 t, and on each side 4 x 3 t recessed and foldable lashing rings * Hot-dip galvanized two-step access ladder in front of the front wall (left side) * 1 pair of aluminum ramps (10 t/pair with axle distance over 2,500 mm) 3,570 x 410 x 120 mm, suitable for rubber-tired and tracked vehicles * 2 rear-integrated storage compartments for aluminum ramps in the chassis; load securing according to EN 12642 XL * --Coupling height loaded approx. 530 mm * unloaded approx. 590 mm-- * Body paint finish in RAL 9010 pure white Nodpfsr Dpz Hsx Aibewf * Chassis, drawbar, rear drop supports, underrun protection are hot-dip galvanized * Axles, air tanks, front support windlass * K80 coupling painted in a shade of black * New vehicle with manufacturer warranty * Errors and prior sale reserved * Immediately available ex Egestorf

Stanje: kot nova (razstavni stroj), največja dovoljena obremenitev: 2.557 kg, skupna masa: 3.500 kg, dolžina tovornega prostora: 5.560 mm, širina tovornega prostora: 2.200 mm, višina nakladalnega prostora: 300 mm, Pri ANHÄNGERWIRTZ je na raspolaganju mnogo modela online. Kupujte udobno i 24/7 putem našeg online trailershop-a. Nwodey D Hf Uepfx Aibof Preuzmite lično ili organizujte dostavu. Naš online centar za preuzimanje vaših novih prikolica nudi snažne brendove! Preko 850 novih prikolica na lageru. Preko 130 polovnih prikolica stalno u ponudi. Neobavezujući primer: Univerzalni transporter Atlas 3500, dimenzije 556x218x30cm, nosivost 3500kg, tridem osovine, plato sa aluminijumskim stranicama visine 30cm, podeljene po sredini sa reflektujućom trakom, spoljašnji sistemi za zaključavanje, niska visina utovarnog prostora od 56cm, pneumatika 6x 10", rampe za utovar ispod platforme, 20 veznih ušica na šasiji, automatski točak za stabilizaciju... Isključivo dostupno online! Prodaja i telefonsko preuzimanje porudžbina u sledećim terminima: ili 24 časa preko našeg online shop-a na trailer-shop-u. Autorska prava – Zaštita marke POB30-350-56 04.26.

Stanje: novo, lastna masa: 775 kg, največja dovoljena obremenitev: 2.725 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.500 mm, širina tovornega prostora: 2.000 mm, višina nakladalnega prostora: 750 mm, prostornina tovornega prostora: 7,2 m³, barva: drugo, gradbena višina: 720 mm, delovna širina: 2.080 mm, Manufacturer: Brian James Trailers Type: Car Transport Trailer T Transporter 231-4520-35-2-12 Permissible Gross Weight: 3500 kg, Twin-Axle Payload: 2725 kg Unladen Weight: 775 kg Internal Dimensions: 4500 x 2000 mm Tyres: 195/60 R12C Loading Height: 665 mm Supplied with the following options: - hydraulically tiltable - 2 individual rear ramps, each 2.35 m long - Ramps adjustable to multiple positions - 100 km/h road approval - manual winch incl. spare wheel incl. grip deck incl. LED lighting incl. heavy-duty jockey wheel, foldable incl. coupling head with integrated lock incl. anti-slip perforated steel loading area incl. wooden floor section in the centre incl. storage box with aluminium lid As a Brian James PREMIUM PARTNER we have many models in stock. 5-year chassis warranty. Price includes vehicle registration certificate (Part II and COC papers). We hold a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide a free temporary number plate. We repair trailers of all makes. Additional accessories available upon request. Technical changes, price adjustments, and errors excepted. No liability is assumed for errors or printing mistakes. Automatic reversing system, rubber torsion axle, loading ramp, tiltable platform, jockey wheel, marker lights, hot-dip galvanisation, braked, including warranty, equipment configurable as required, modifications upon request, multiple lashing options, mesh hooks on underside, V-drawbar hot-dip galvanised, 13-pin plug and reversing lights, durable, anti-slip surface, 5-year chassis warranty. Njdpoyw E A Sjfx Aibowf

Stanje: novo, lastna masa: 1.000 kg, največja dovoljena obremenitev: 2.500 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.150 mm, višina nakladalnega prostora: 750 mm, prostornina tovornega prostora: 8,8 m³, barva: drugo, gradbena višina: 720 mm, delovna širina: 2.180 mm, Manufacturer: Brian James Trailers Model: Car Transporter T Transporter 231-5021-35-2-12 Gross vehicle weight: 3,500 kg, twin axle Payload: 2,500 kg Unladen weight: 1,000 kg Bed dimensions: 5,000 x 2,150 mm Tyres: 195/60 R12C Loading height: 665 mm Including the following options: - Hydraulically tiltable - Rear with 2 individual ramps, each 2.35 m long - Ramps adjustable to multiple positions - Certified for 100 km/h - High tyre rack - 5 anthracite aluminium alloy wheels including spare wheel - Grip Deck non-slip surface - LED lighting - Heavy-duty, retractable jockey wheel - Coupling head with integrated lock - Perforated steel anti-slip loading platform - Wooden insert in the centre of the floor Nedpfx Aievtf Iuobowf - Tool/storage box with aluminium lid As a Brian James PREMIUM PARTNER, we have many models in stock. 5-year chassis warranty. Price includes vehicle registration documents (Registration Certificate Part II and COC papers). We stock a large selection of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we can provide a free temporary number plate for vehicle transfer. We carry out repairs on trailers of all makes. Further accessories available upon request. Specifications, prices and availability subject to change. Errors and misprints excepted. No liability for errors or misprints. Reverse-automatic brake, rubber suspension axles, loading ramps, tilting platform, jockey wheel, side marker lights, hot-dip galvanised, braked, warranty included, customisable equipment and adaptations, multiple lashing options, mesh hooks underneath, hot-dip galvanised V-drawbar frame, 13-pin plug and reverse lights, heavy-duty anti-slip surface, 5-year chassis warranty.

Stanje: novo, lastna masa: 1.000 kg, največja dovoljena obremenitev: 2.500 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.100 mm, višina nakladalnega prostora: 750 mm, prostornina tovornega prostora: 8,4 m³, barva: drugo, gradbena višina: 720 mm, delovna širina: 2.180 mm, Manufacturer: Brian James Trailers Type: Vehicle Transport Trailer T Transporter 231-5021-35-2-12 Permissible Gross Weight: 3,500 kg, twin-axle Payload: 2,500 kg Unladen Weight: 1,000 kg Internal Dimensions: 5,000 x 2,100 mm Tyres: 195/60 R12C Loading Height: 665 mm Equipment Options: - Hydraulically tiltable - Rear with 2 x individual ramps, 2.35 m long - Adjustable ramp positions - 100 km/h road approval - Manual winch Included: - Spare wheel - Grip Deck - LED lighting - Heavy-duty, foldable jockey wheel - Coupling head with integrated lock - Perforated anti-slip load bed - Wooden floor insert in centre area - Storage box with aluminium lid As a Brian James PREMIUM PARTNER, we have many models in stock. 5-year chassis warranty. Price includes vehicle registration documents (Certificate of Registration Part II and COC papers). We have a large inventory of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. Complimentary export plates available on request. We repair trailers of all makes. Additional accessories available upon request. Nwedeiprk Uepfx Aibof Technical specifications, prices and details subject to change; errors excepted. No liability for mistakes or typographical errors. Automatic reverse function, rubber suspension axles, drive-on ramp, tilting loading area, jockey wheel, marker lights, hot-dip galvanised, braked, warranty included, customised configuration and modifications on request, numerous tie-down points, net hooks on the underside, V-shaped drawbar hot-dip galvanised, 13-pin plug and reversing lights, durable, non-slip deck surface, 5-year chassis warranty.

Stanje: novo, lastna masa: 3.120 kg, največja dovoljena obremenitev: 8.780 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.280 mm, širina tovornega prostora: 2.480 mm, vzmetenje: jeklo, velikost pnevmatike: 245 / 70 R 17,5, medosna razdalja: 990 mm, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 245 / 70 R 17,5, velikost zadnje pnevmatike: 245 / 70 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, per ramp approx. 2,700 mm long x 900 mm wide, ramps with grating, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 lashing eyes each 6 t, steel side panels, foldable and removable, 50 mm wooden planks, loading area tapered at the rear, internal loading width 2,480 mm, removable rear stake, open at the front for through-loading, also available with 5,300 mm load area length! Rental price from €500, -- Errors, misprints and alterations excepted, sample images -- More data on request!, More details:! Nwjdpfx Asywfhhoibjf

Stanje: novo, lastna masa: 3.120 kg, največja dovoljena obremenitev: 8.780 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.280 mm, širina tovornega prostora: 2.480 mm, vzmetenje: jeklo, velikost pnevmatike: 245 / 70 R 17,5, medosna razdalja: 990 mm, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 245 / 70 R 17,5, velikost zadnje pnevmatike: 245 / 70 R 17,5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, per ramp approx. 2,700 mm long x 900 mm wide, ramps with grating, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 lashing eyes each 6 t, steel side walls, foldable and removable, 50 mm wooden planks, loading platform tapered at the rear, internal loading width 2,480 mm, removable rear stanchion, open at the front for through-loading. Also available with a loading platform length of 5,300 mm! Rental price from €500. -- Subject to misprints, errors and changes. Sample images -- More data at: !, More Details: ! Nodpjywfd Aofx Aibjwf

Stanje: novo, največja dovoljena obremenitev: 37.560 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: Nedpsykx Nksfx Aibowf ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 ton BPW axles * Start assist for shunting purposes on the first axle, activated via EBS (without truck-side installation) * Last axle is a trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle for maneuvering purposes from the driver’s cab via EBS (without truck-side installation) ----Suspension: * Air suspension with lift and lowering function as well as RtR valve ----Electrics / Lighting: * Smart-Board infotool mounted on trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * 2 additional LED reversing lights * 7-pin socket at rear for overlength lighting * Side marker lamps with indicator function * Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation) ----General Attachments: * Side underrun protection * Support legs at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall crossmember (without spare wheel) * Mechanically adjustable warning sign packages front and rear * Swing arm as a carrier for connecting lines from truck to semi-trailer ----Low Loader Platform: * 2nd king pin position * Gooseneck platform with 45° chamfered front corners and front-mounted toolbox made of galvanized, powder-coated sheet steel B = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm aluminum side boards (in desired RAL color) foldable and removable along the gooseneck platform * Rear wall, insertable, height 150 mm * Rear incline on the gooseneck platform to the low-bed approx. 700 mm long with checker plate covering and at the end a perforated strip for attaching aluminum approach ramps * Gooseneck platform with 50 mm clamped wooden planks, low-bed platform with 60 mm clamped wooden planks * Tread plate over axles * 9 mechanical extension panels to a total width of 3 m, not included in the rear incline (extension planks available with closed transverse stowage compartment under load floor) * Preparation for 3 storage recesses under the gooseneck platform for optional storage of aluminum approach ramps or planks for covering wheel recesses * Preparation for container locks on the swan neck ----Load Securing (LaSi Package): Gooseneck platform: * Perforated outer frame, 45° angled, with hole pattern for lashing devices (2 t lashing capacity per point with a minimum spacing of 480 mm) * 3 x 13.4 t lashing rings recessed into the floor per side (1 x on gooseneck platform, 1 x on longitudinal frame after the cranking, 1 x above middle axle next to longitudinal frame) Low-bed platform: * 3 x 13.4 t lashing rings per side at the outer frame (1 x start of gooseneck cranking, 1 x start of approach ramp, 1 x end of approach ramp) * 2 x 10 t lashing rings per side (1 x between front wheel recess and 1st axle, 1 x between 2nd and 3rd axle) * 3 x 5 t lashing rings per side screwed to outer frames of the wheel recesses (2 at front wheel recess, 1 at rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest from end of last rigid axle over the steering axle to the end cross member, continuous with internal reinforcing profile approx. W = 770 mm x T rear

Stanje: novo, največja dovoljena obremenitev: 37.560 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Moving-off aid for shunting, connected to the first axle via EBS (no installation required on the truck side) * Last axle as self-steering trailing axle with electro-pneumatic lock * Trailing axle lock for shunting purposes, activated from the cab via EBS (no installation required on the truck side) ----Suspension: * Air suspension with lifting and lowering system, including RtR valve ----Electrics / Lighting: * Smart-Board infotool mounted on trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * 2 additional LED reversing lights * 7-pin socket at rear for overlength lighting * Side marker lights with indicator circuit Nwodpfx Aijykx Nqobsf * Tire pressure monitoring with display in the truck via EBS signal (no installation required on the truck side) ----General Attachments: * Side underrun protection * Landing gear at front, swing supports at rear of the chassis * Straight steel fenders * Spare wheel carrier in front of front wall crossmember (spare wheel not included) * Mechanically adjustable warning sign packages at front and rear * Swing arm as carrier for connection lines from truck to trailer ----Low Loader Deck: * 2nd kingpin position * Saddled platform with 45° chamfered front corners and front toolbox made from galvanized, powder-coated steel sheet (W = 2,480 x H = 500 x L = 665 mm) with folding lid * 400 mm high drop-down/removable aluminium sideboards (custom RAL color) on saddle platform * Removable 150 mm high rear wall * Rear inclined ramp of approx. 700 mm at the end of saddle platform to low-bed deck, fitted with checker plate and lashing bar for attaching aluminium approach ramps * Saddle platform with 50 mm tongued-and-grooved timber floor, low-bed platform with 60 mm tongued-and-grooved timber planks * Tread plate above axles * 9 x mechanical folding extensions to 3 m overall width, but not on rear ramp (extension planks included with lockable transverse storage compartment under load area) * Preparation for 3 ramp storage compartments under saddle platform for either aluminium ramps or timber planks for wheel trough covers * Preparation for container locks on the gooseneck ----Load Securing (LaSi Package): Saddle Platform: * Perforated external frame, angled at 45°, with hole pattern for lashing equipment (2 t lashing capacity per point, minimum spacing 480 mm) * 3 x 13.4 t recessed tie-down rings per side (1 on saddle platform, 1 on main longitudinal beams after the step, 1 above the center axle beside the beam) Low-bed Deck: * 3 x 13.4 t tie-down rings per side on outer frame (1 at the start of the gooseneck, 1 at the start of the rear ramp, 1 at the end of the ramp) * 2 x 10 t tie-down rings per side (1 between front wheel-well and 1st axle, 1 between 2nd and 3rd axle) * 3 x 5 t tie-down rings per side, bolted to the outer frame of wheel wells (2 at front, 1 at rear wheel well) ----Digger Arm Rest: * Extended digger arm rest from end of last fixed axle over steering axle to end crossmember, continuous with internal reinforcement profile, approx. W = 770 mm x D at rear

Stanje: novo, največja dovoljena obremenitev: 58.860 kg, skupna masa: 73.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete range of vehicles, including those available immediately and at short notice, on our website. Excerpt from the equipment list. Full specification available on request. Gooseneck: * Gooseneck with approx. 45° chamfered front corners and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring, approx. 30 mm thick Extendable loading platform: * Extendable loading platform with rear chamfer approx. 500 mm x 8° * 8 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) * Cutouts in the outer frame of the loading platform for attaching tensioning straps (LC 2,000 daN) * Hardwood flooring, approx. 48 mm thick; checker plate flooring over the axles Two-piece steel ramps: * One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 900 mm, with Super Grip rubber coating * Ramp with hydraulically folding and unfolding ramp sections * Hydraulic lifting mechanism, hydraulically adjustable * Maximum load per pair: 50,000 kg * In accordance with Regulation 1230/2012/EU, ramps with a length less than 300 mm do not need to be included in the overall vehicle length of 16,500 mm when in driving position Axles: * BPW axles and suspension, 1st axle with steering, 2nd and 3rd rigid, 4th and 5th axles trailing-steered, air suspension, with raise/lower function, drum brakes * Trailing steering axles with electromagnetic reverse lock, activated via reverse gear or manually * Technical axle load: 12,000 kg each Tyres: * Tyres 235/75 R 17.5 3PMSF – make of our choice TPMS: * TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the truck via standardized EBS interface according to ISO 11992. For correct display, the truck must be capable of receiving and displaying this data Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Brake system: * Wabco brake system in compliance with EU regulations with EBS-E (4S3M), without connecting lines to the tractor unit Steel structure: * Steel structure made from high-tensile fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical system in accordance with EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Complete steel structure automatically shot blasted after welding with a blast wheel system * Second blasting treatment with corundum for optimum adhesion of the coating system * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection Njdpfoy Augwjx Aibswf * Final paint finish with two coats of 2K topcoat, single color in RAL 3002 carmine red according to RAL system 841GL * Rear section metallized and painted in RAL 9010 (pure white) Including the following additional equipment: * 2-inch king pin * One galvanized steel front wall, approx. 400 mm high * A spare wheel carrier in front of the front wall * Yellow-red air couplings at the galvanized front connection strip * A bracket for a rotating beacon at the rear of the trailer * Galvanized supports under the chamfered section of the loading platform * Super Grip 2 rubber coati

Stanje: novo, največja dovoljena obremenitev: 16.750 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 21.0: * Wabco EBS-E (electronic braking system) * RDÜ tyre pressure monitoring system * Emergency release mechanism for spring brake cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension with lifting and lowering function * Mounting provisions at the front bulkhead and rear slope for subsequent fitting of container locks for transporting 20" containers * Drawbar with 50 mm flange towing eye and height-adjustable drawbar * Jost landing gear at the front * Rear external folding supports * Plastic toolbox approx. 750 x 350 x 300 mm, right-hand side * Side underrun protection * Plastic quarter mudguards * 15-pin power socket Nwedpfx Ajl Tihxoibof * LED lights * 21 t GVW version with reinforced frame and reinforced axles * Reinforcement package on the chassis for drilling rig transport * 50 mm softwood floor, clamped design * Provisions at the front bulkhead for retrofitting container locks * Bolted front bulkhead made from smooth sheet metal * Split, foldable trapezoidal-profile steel sidewalls with centre folding stake * Steel rear wall, insertable between ramps – storage bracket inside front bulkhead when not in use * Screw-mounted rear stakes * Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm * Option for fitting 3 t folding lashing rings every 600 mm * Profifix lashing rail centrally on longitudinal axis for lashing up to LC 3000 daN * 1 x 10 t lashing ring each at front and rear corners * Lashing package: 2 x 8 t retractable lashing rings per side recessed into the outer frame; various holes in the bulkhead and rear crossmember for lashing up to 1.2 t * One-piece mechanical grating ramps with spring mechanism for single-person operation approx. 3,000 x 620 mm (can be collapsed to 20 mm) * Rear entry angle approx. 860 mm on chassis * Drawbar, front wall, tailgate, folding supports and ramps hot-dip galvanised * Axles, springs, air tanks, and landing gear finished in black paint * Load height unladen approx. 940 mm * Loaded approx. 910 mm * Wheelbase: 1,810 mm * Tyres: 235/75R17.5 * Side wall painting colour freely selectable up to approx. 2 weeks before production date, except metallic and special colours * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from CW 29 / 2026

Stanje: kot nova (razstavni stroj), največja dovoljena obremenitev: 2.557 kg, skupna masa: 3.500 kg, dolžina tovornega prostora: 5.560 mm, širina tovornega prostora: 2.200 mm, višina nakladalnega prostora: 300 mm, Bei ANHÄNGERWIRTZ viele Modelle online verfügbar Bequem und rund um die Uhr Online kaufen auf trailershop Selbst abholen oder liefern lassen. Der online Abholmarkt für Ihren neuen Anhänger bietet starke Markenfabrikate! über 850 Neuanhänger auf Lager über 130 gebrauchte Anhänger ständig im Angebot. unverbindliches Beispiel: Allzwecktransporter Atlas 3500 556x218x30cm 3500kg Tridem Fahrwerk, Plateau mit 30cm Aluminium Bordwänden mittig geteilt mit Reflektorband, Spannverschlüsse aussenliegend, 56 cm niedrige Ladehöhe, Bereifung 6x 10", Auffahrampen unter Ladefläche, 20 Zurrbügel im Chassisrand, Automatik Stützrad... jetzt nur Online erhältlich! Verkauf telefonische Bestellannahme zu folgenden Zeiten: Nwsdpfoywf Rcox Aibef oder rund um die Uhr über unseren Onlineshop auf trailer-shop Urheberrecht - Markenschutz POB30-350-56 03.26

Stanje: kot nova (razstavni stroj), največja dovoljena obremenitev: 2.557 kg, skupna masa: 3.500 kg, dolžina tovornega prostora: 5.560 mm, širina tovornega prostora: 2.200 mm, višina nakladalnega prostora: 300 mm, Pri ANHÄNGERWIRTZ je na raspolaganju mnogo modela online. Kupujte udobno i u bilo koje doba dana putem trailershop-a. Moguća lična preuzimanja ili dostava. Online tržište za preuzimanje vaših novih prikolica nudi renomirane brendove! Više od 850 novih prikolica na lageru. Preko 130 polovnih prikolica stalno u ponudi. Neobavezan primer: Nwsdpfx Aieyt Dvuobsf Višenamenski transporter Atlas 3500, dimenzije 556x218x30cm, nosivost 3500kg, Tridem osovinski sklop, platforma sa 30cm aluminijumskim stranicama podeljena po sredini sa reflektujućom trakom, spoljašnji napinjači, niska visina utovara 56 cm, gume 6x 10", rampe za utovar ispod platforme, 20 prstenova za vezivanje na ivici šasije, automatski točak za potporu... Sada dostupno samo online! Prodaja i telefonsko naručivanje u sledećim terminima: ili uvek putem našeg internet shopa na trailer-shop-u. Autorsko pravo - zaštita brenda 5522-5-POB30-350-56 03.26

Stanje: rabljeno, lastna masa: 10.900 kg, največja dovoljena obremenitev: 43.600 kg, skupna masa: 54.500 kg, konfiguracija osi: 3 osi, prva registracija: 04/2025, dolžina tovornega prostora: 8.700 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 855 mm, velikost pnevmatike: 245/70 r17.5, barva: siv, Leto izdelave: 2025, obratovalna teža: 10.900 kg, Oprema: ABS, Gooseneck, rigid, center tube design: - Closed outer frame with cutouts for lashing straps (LC 1,500 daN) - Steel floor with anti-slip coating - Including perforated rail for aluminum approach ramps - 2" king pin - Manually operated BPW landing legs - 550 mm long, 8° chamfer at end of gooseneck - Front wall including park position for rear wall, 400 mm high - Spare wheel holder mounted vertically on the front side of the gooseneck - 3 pairs of recessed lashing rings (LC 5,000 daN) in the loading area of the gooseneck - Aluminum side boards, 400 mm high, comprising 2x side boards each 3,150 mm long, and rear board with stanchions (galvanized) - Rectangular aluminium toolbox with folding lid, lockable, approx. 400 x 800 mm, center - 45’ aluminium toolbox with folding lid, lockable, approx. 400 x 800 mm, left - 45’ aluminium toolbox with folding lid, lockable, approx. 400 x 800 mm, right Nedpfx Aiji Ai E Rebowf Loading platform, single-extendable: - Closed outer frame with cutouts for lashing straps (LC 1,500 daN) - Fixed section at front 700 mm - Steel plate floor with anti-slip coating - Chamfered transition between fixed part and deck for bridging rails and wheel recesses - Excavator trough including elongated holes for load securing (LC 1,500 daN), length approx. 3,850 mm - Prepared for hydraulic ramps (electrical supply) - Rails to widen up to 3,000 mm - 8° chamfered vehicle rear, 550 mm long - Slide system for easy mounting/dismounting of ramps - Continuous mud flap at the rear - 1 pair of lashing points LC 10,000 daN centrally on the loading area behind the gooseneck - 7 pairs of lashing points LC 10,000 daN in the outer frame of the loading platform - 6 pairs of stanchion pockets 100 x 50 mm in the outer frame of the loading platform - 1 pair of lashing points LC 10,000 daN centrally in the rear section of the loading platform - 1 pair of stanchion pocket rails approx. center of the loading area - 1 pair of stanchion pocket rails on the fixed part - 1 pair of stanchion pocket rails behind the last axle Ramps: - Hydraulic double-folding ramps, 2,750+1,500x800 mm - Larch wood surface - Operated by remote control (wired and wireless) - Quick-change ramp (dismantling system) Chassis: - Axle brand: BPW ECO Max - 2 ride heights - 4 axles @ 10 t (technically 12 t) - Twin tires 245/70 R17.5 - 2 x rigid axles and 2 x friction-steered axles - Reverse steering lock for friction-steered axles via reverse gear - Brake system by Knorr (according to EU standards with EBS-E) - Knorr TIM G2 (Trailer Information Module) - RSS (Roll Stability Support) stability control - Load-dependent lift axle on the first axle incl. starting aid (forced lowering of lift axle via TIM possible) Accessories: - 4 wheel chocks with holder - 2 pairs of warning panels 423 mm x 423 mm, with 2 position lights and socket for rotating beacon, steplessly adjustable up to 3,950 mm - Securing points on gooseneck and on loading platform (alternatively on ramp, if available) included - Plug-in bulkhead at the end of the excavator trough - Electrohydraulic unit for ramp operation - Ramp control by wireless remote - Hydraulic rear support legs for stabilization during loading - 1 pair of additional reversing lights at the rear, activated when reversing - Larch wood widening planks (option)

Stanje: novo, skupna masa: 78.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 850 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, Oprema: ABS, Gooseneck: • Gooseneck in SNT design to optimize loading area length, approx. 3,700 mm long, rear with a bevel approx. 1,000 mm x 10° • For tractor units: 4 x 2, 6 x 2 and 6 x 4 Loading Area: • Extendable loading platform, approx. 8,800 mm long with rear bevel approx. 500 mm x 10° • A recess in the platform and rear bevel to accommodate the excavator dipper stick, approx. 3,950 x 580 x 370/450 mm Nwjdpfx Ajrvw U Sjibsf Ramps: • One pair of two-piece steel ramps, approx. 4,350 mm long and 900 mm wide • Hydraulically folding ramp tips • Ramps hydraulically adjustable separately approx. 235 mm outwards and approx. 215 mm inwards • Hardwood decking on the beveled part of the loading area • Ramp with hardwood decking • 20 x 30 mm square climbing strips, approx. every 200 mm on the outer frame of the ramp Axles and Tyres: • TWINAXLE-II independent wheel suspension with BPW stub axles, 1st axle steered in advance, all other axles are hydromechanically forced steered • 1st axle with electromagnetic reverse lock via reverse gear and manual activation • Technical axle load: 12,000 kg • Hydr. axle compensation, hydraulic cylinders with shut-off valves • Tyres 245/70 R 17.5 • TPMS tyre pressure monitoring system according to ECE R 141 Accessories Included: • Plug-in steel front wall, approx. 400 mm high • 4 wheel chocks with holder • Front connection bar with yellow-red air couplings • 3 kW electro-hydraulic power pack for hydraulic control, except for hydraulic winches • 1 spare wheel • 2 pairs of screw-in lashing rings • 1 pair of horizontal lashing rings in the rear area of the gooseneck • On the gooseneck: 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized • On the gooseneck: 1 plug-in ALU rear board, approx. 400 mm high, anodized • Approx. 40 mm thick hardwood decking on the gooseneck, checker plate over the king pin • 3.5" king pin • Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide • Load area locking with conically welded arresting profiles every 250 mm • Incl. pre-tensioning plate • 1 pair of lashing rings on the front cross member • 8 pairs of recessed, fold-out lashing rings in the outer frame of the platform • Extendable (galvanized) widenings approx. 230 mm per side • 1 pair of fixed open wheel recesses up to extension, approx. 700 x 410 mm, in the platform in front of the 1st axle • Wheel recesses with checker plate covering and 15 x 15 mm square climbing strips, approx. every 200 mm • 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm, in the platform between the 1st and 2nd axle • Wheel recesses with 15 x 15 mm square climbing strips and widenings in the lower section • ALU covers for the wheel recesses between 1st and 2nd axle, which can also be used as broadening planks • 1 pair of mechanical rear supports • 20 x 30 mm square climbing strips, approx. every 200 mm on the outer frame of the bevel of the loading area • Central lubrication system with 1 pump, BEKAMAX brand, standard grease as per NLGI-2 • Radio and cable remote control, with 2 indicator lights on the receiver for single wheel control • WABCO Smart Board system • The Smart Board is equipped with an odometer • 4 warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and mounts for rotating beacon

Stanje: novo, lastna masa: 4.680 kg, največja dovoljena obremenitev: 13.320 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.750 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 600 mm, vzmetenje: jeklo, velikost pnevmatike: 245/70 R17,5, | Möslein tandem kiper-nizkopriležnik DTD 18 Schwebheim | Tristranski kiper z vgradnimi rampami | Nosilnost 13.320 kg | Višinsko nastavljivo vlečno oje | ABS | Dolžina tovorne površine: 5,75 m, širina: 2,35 m, višina stranic: 0,60 m | Zložljive zadnje podporne noge | Pnevmatske gume: 435/50 R19.5, BPW osi | Pridržujemo si pravico do napak, tipkarskih napak in predhodne prodaje. Nwodpfx Aiexztrmebsf

Stanje: rabljeno, konfiguracija osi: 2 osi, prva registracija: 04/2005, barva: črn, Leto izdelave: 2005, Oprema: ABS, = Additional Options and Accessories = - Spare wheel - Twin tires = Notes = Nwedpfxsxw T Uaj Aibof Müller Mitteltal 2-axle T5 2AL low loader with ramps Air suspension BPW axles ABS ZSA Tires 60% tread, GR 235R17.5 ID No.: 665 We look forward to welcoming you for consultation, contract signing or vehicle collection at our dealership. Please arrange an appointment in advance. If you are unable to visit us in person, we offer complete processing via phone/email/WhatsApp/fax. On request, we deliver your new vehicle directly to your door. This means you get the best price, maximum security, and convenience when buying your vehicle. Trade-in We are happy to take your used vehicle in part exchange. We offer the possibility of digital vehicle valuation based on your photos, even without visiting our dealership. Our specialized purchasing team offers you a guaranteed top price. On request, we will deliver your new pre-owned vehicle nationwide right to your doorstep and take your old vehicle back with us. Financing – Leasing Immediate approval and settlement of existing loans. Your specialist partner for cars, vans, commercial vehicles, and construction machinery. ITC GmbH & Co KG Siemensstraße 7 32312 Lübbecke (industrial area) Visit us on our website Always over 400 vehicles in stock The information provided in advertisements, online, price tags, and images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typing and data transmission errors. Listed equipment may require separate verification; the offer is generally without new TÜV inspection, but we would be pleased to make you an offer through our partner workshop. Subject to errors and prior sale. = Additional Information = Unladen weight: 8,900 kg Payload: 26,100 kg Gross vehicle weight: 35,000 kg Sales price: €18,000, US$21,210

Stanje: rabljeno, prva registracija: 04/1993, lastna masa: 550 kg, največja dovoljena obremenitev: 1.450 kg, skupna masa: 2.000 kg, barva: siv, vrsta prenosa: mehanski, vzmetenje: drugo, Low-loader, first registered on 06/04/1993. Loading ramp, Rockinger coupling. Payload: 1,450 kg. Permissible total weight: 2,000 kg. FOR US, CONDITION AND OVERALL IMPRESSION ARE CRUCIAL, PRICE IS SECONDARY. For further information, please contact Mr. Faller at the provided number. //*TRADE-IN, ACCEPTANCE OF YOUR VEHICLE AS PART PAYMENT OR COLLATERAL, AS WELL AS FINANCING POSSIBLE! All information without guarantee* More offers can be found on our homepage. The description and specified data do not constitute a guarantee and are not binding. The only binding agreement is the purchase contract concluded at the dealership when buying the vehicle. Subject to errors and prior sale! Nsdpfel Tikhsx Aibowf

Stanje: rabljeno, največja dovoljena obremenitev: 75.700 kg, skupna masa: 93.200 kg, konfiguracija osi: 3 osi, prva registracija: 06/2008, dolžina tovornega prostora: 8.700 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 885 mm, velikost pnevmatike: 245/70 R17.5, barva: bež, Leto izdelave: 2008, Gooseneck, rigid, in central beam design: - Loading area: 3,700 mm x 2,480 mm - Beveled 10°, front corners 45° (1,080 mm long, 190 mm high bevel at the end of the gooseneck) - Closed outer frame - Max. fifth wheel load: 26,000 kg - Swing radius: 2,700 mm - 2" kingpin - Wooden floor - Hydraulically operated landing legs - One-piece aluminum drop sides, 400 mm high, closed on 3 sides including rear tailboard, stakes foldable and removable - 2 pairs of lashing points LC 8,000 daN Loading area: - Single telescoping, continuous over chassis - External/internal tube construction with 1,090 mm fixed loading platform section at front - (L x W): 8,700 mm x 2,550 mm, extendable by 6,700 mm to max. 15,400 mm - Steel floor covering - Locking of extension stages via spring-loaded cylinders and conical bolts - Vehicle optimized for maximum extension - 7 pairs of lashing points LC 13,000 daN - 6 pairs of lashing points LC 6,000 daN - 6 pairs of stake pockets 100 x 50 mm (LC 2,000 daN) 6-axle running gear: - 1 rigid axle, 5 forced-steering axles - Axle brand: SAF - Chassis width: 2,550 mm - 1st axle: load-dependent lift axle - 2nd axle: manually liftable (not load-dependent) - Wheelbase, starting from first axle: 1,310 mm - Twin tires 245/70 R 17.5 - Air suspension, 200 mm lift - Ride height: 885 mm +100 mm / -100 mm - 2nd ride height: 845 mm +140 mm / -60 mm - Floor covering: steel / wood Vehicle rear: - "Beveled" design (600 mm long, 10° bevel) - 1,000 mm overhang from center of last axle Nodpfx Aijxp U Tzjbswf - Ramp eye detachable at the rear cross member - Mechanical support for stowage during loading - 1 pair of lashing points LC 6,000 daN - 1 pair of lashing points LC 13,000 daN Loading ramps: - Two-piece loading ramps, length 2,850 mm + 1,540 mm, width 720 mm - Hydraulic ramp lifting mechanism - SuperGrip rubber surface - Climbing strips on outside of ramps 20 mm x 20 mm x 100 mm - Laterally adjustable by hydraulic cylinder to maximum external width of 2,790 mm or minimum internal spacing of 480 mm - Integrated mechanical lock in ram lift cylinder for securing in transport position - Mounting bracket for beacon light Hydraulics: - Hydraulic coupling for tractor unit (1 set), connectors for tractor, hydraulic pump on tractor unit with maximum 60 l/min delivery rate - Hydraulic hand emergency pump - Electric-hydraulic power pack Rear steering: - Rear steering bottle for manual steering of trailer axles by cable remote control, spiral cable extendable from 1.5 m to 5 m Accessories included: - Spare wheel holder at front of gooseneck, pluggable, galvanized - Mounting bracket for stakes on gooseneck - 2 pairs warning signs, approx. 423 mm x 423 mm - Widening kit incl. widening beams, hook-on widening element at vehicle rear - 1 pair wheel chocks incl. holder - 1 spare wheel - Central lubrication system with 2 grease pumps - Single-color paint finish in RAL-1001 beige

Stanje: novo, največja dovoljena obremenitev: 10.900 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, ETÜ-TA-R 14.4 ----Brake System: * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Air suspension ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm up to 2,250 mm * 40 mm flange towing eye ----Lighting / Electrical: * TPMS (Tire Pressure Monitoring System) * LED tail lights 12 / 24 V * 15-pin power connector ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox mounted externally at the front right on the bulkhead * Side underrun protection Njdpfxeq Dyvye Aibowf * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Preparation in front of the bulkhead for retrofitting container locks * Bolted smooth sheet metal bulkhead * Trapezoidal-profiled, fold-down steel side walls with drop-side spring assists * Steel rear wall, can be stowed between the ramp holders when not in use, inside in front of the bulkhead * Bolted rear stanchions * Rear drive-on slope approx. 860 mm ----Load Securing: * Perforated outer frame, edged at approx. 45 degrees with 2 t lashing capacity every 480 mm * Installation of 3 t fold-down lashing rings possible every 600 mm * 1 x 6.3 t lashing ring at each front and rear corner * Various holes for 1.2 t lashing options in bulkhead and rear crossmember ----Ramps: * One-piece mechanical grating drive-up ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (collapsible down to 20 mm) ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, bulkhead, rear wall, tailgate, and drive-up ramps * Side wall color in RAL 9010 pure white * Painting of side walls in any RAL color available at extra cost ----Info: * — Reinforced and certified body according to EN 12642 XL including load securing certificate — * New vehicle with manufacturer warranty * Errors and prior sale excepted ----Delivery time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.900 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, ETÜ-TA-R 14.4 ----Braking System: * EBS Electronic Braking System * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: Nwjdpfx Aepk Dv Rjibof * 2 x 7 t Gigant axles ----Suspension: * Air suspension ----Tow Bar / Flange Towing Eye: * Height-adjustable tow bar, adjustable by 300 mm * Tow bar extension by 250 mm to a total of 2,250 mm * 40 mm flange towing eye ----Lighting / Electrics: * Tire pressure monitoring system (TPMS) * LED rear lights 12 / 24 V * 15-pin power connector ----General Attachments: * Jost landing gear at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox on the front right side of the headboard * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Preparation in front of the headboard for retrofitting container locks * Bolted headboard made of smooth sheet metal * Trapezoidal profiled drop-side walls made of steel, foldable with drop-side spring assist * Steel rear wall insertable between ramp mounts; when not in use, stowed inside in front of the headboard * Bolt-on rear posts * Rear approach angle approx. 860 mm ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Possible installation of 3 t drop lashing rings every 600 mm * One 6.3 t lashing point in each front and rear corner * Various holes in the front and rear cross member for 1.2 t lashing options ----Ramps: * One-piece mechanical grid ramps with spring assistance for single-person operation, approx. 2,750 x 600 mm (can be telescoped down to 20 mm) ----Painting: * Hot-dip galvanized chassis as well as tow bar, headboard, rear wall, tailgate, and ramps * Side wall color RAL 9010 pure white * Painting of side walls in a RAL color of choice available at extra cost ----Information: * --Reinforced and certified body according to EN 12642 XL incl. load securing certificate-- * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately ex works Egestorf

Stanje: novo, največja dovoljena obremenitev: 37.390 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-up aid for maneuvering purposes switched to the first axle via EBS (no installation required on the truck side) * Rear axle as self-steering axle with electro-pneumatic steering lock * Locking of the self-steering axle from the driver's cab for maneuvering purposes, controlled via EBS (no installation required on the truck side) ----Suspension: * Air suspension with lifting/lowering device and Ride-to-Return valve ----Electrics / Lighting: * Smart Board mounted on the trailer as an information tool with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12/24 V * LED rotating beacon (removable) at the rear * 2 additional LED reversing lights * 7-pin socket at rear for extended length lighting * Side marker lights with indicator signal control * Tyre pressure monitoring system with display option in the truck via EBS signal (no installation required on the truck side) ----General equipment: * Side underrun protection * Landing gears at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall crossmember (without spare wheel) * Mechanically adjustable warning sign packages at front and rear * Swing arm as carrier for connecting cables from truck to semi-trailer ----Low loader deck: * 2nd king pin position * Fifth wheel platform with 45° chamfered front corners and front tool box made of galvanized powder-coated sheet steel B = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm high aluminium side boards (in RAL colour of choice) on the sides of the fifth wheel platform, foldable and removable Nodpjq Euakofx Aibswf * Rear wall -150 mm- high plug-in * Rear slope on fifth wheel platform to low bed approx. 700 mm long with tread plate covering and at the end a perforated strip for attaching aluminium loading ramps * Fifth wheel platform with 50 mm clamped wooden planks and low bed platform with 60 mm clamped wooden planks * Tear plate above the axles * 9 x mechanical folding extensions to 3 m overall width, but not in the rear slope (extension planks available with closed storage compartment across the direction of travel under the loading floor) * 3 mounting shafts under the fifth wheel platform for storage of optional aluminium loading ramps or wooden planks for wheel well coverings ----Load securing (LaSi package): Fifth wheel platform: * Perforated outer frame angled at 45° with hole pattern for lashing points (2 t lashing capacity per point at a minimum spacing of 480 mm) * 3 x 13.4 t lashing rings each side recessed in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal beams after the drop, 1 x above the centre axle next to the longitudinal beam) Low loader platform: * 3 x 13.4 t lashing rings each side on the outer frame (1 x beginning of the drop on the fifth wheel platform, 1 x beginning of the ramp slope, 1 x end of the ramp slope) * 2 x 10 t lashing rings each side (1 x between front wheel well and 1st axle, 1 x between 2nd and 3rd axle) * 3 x 5 t lashing rings each side bolted to the outer frame of the wheel wells (2 on the front wheel well, 1 on the rear wheel well) ----Excavator arm recess: * Extended excavator arm recess from end of last fixed axle through to steering axle up to rear crossmember, continuous with

Stanje: novo, največja dovoljena obremenitev: 37.390 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Traction aid for shunting purposes engaged on the first axle via EBS (without truck-side installation) * Last axle as trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle from the driver's cab for shunting via EBS (without truck-side installation) ----Suspension: Nwjdjtpta Depfx Aibef * Air suspension with lifting and lowering function as well as RtR valve ----Electrics / Lighting: * Smart Board mounted on trailer as info tool with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting 12 / 24 V * LED rotating beacon (removable) at the rear * 2 extra LED reversing lights * 7-pin socket at the rear for additional length lighting * Side marker lights with indicator activation * Tire pressure monitoring system with display option in the truck via EBS signal (without truck-side installation) ----General attachments: * Side underrun protection * Landing gears at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the headboard crossmember (without spare wheel) * Mechanically adjustable warning sign packages at the front and rear * Swivel arm as carrier for connection cables from truck to semi-trailer ----Lowbed platform: * Second kingpin position * Fifth wheel platform with 45° bevelled front corners and front toolbox made of galvanised, powder-coated steel sheet, W = 2,480 mm x H = 500 mm x L = 665 mm with folding lid * Side aluminium drop sides, 400 mm high (in RAL custom colour), foldable and removable * Rear wall -150 mm- high plug-in * Rear slope on the saddle platform to the lowbed approx. 700 mm long with chequer plate covering and a perforated strip at the end for attaching aluminium loading ramps * Fifth wheel platform with 50 mm clamped wooden planks and lowbed platform with 60 mm clamped wooden planks * Tread plate over the axles * 9 x mechanical folding wideners to 3 m overall width, not in rear slope (widening planks available with sealed crosswise storage compartment under the loading area) * 3 mounting shafts under the saddle platform for the storage of either aluminium loading ramps or wooden planks for wheel well covering ----Load securing (LaSi-package): Fifth wheel platform: * Perforated outer frame, 45° angled, with hole pattern for lashings (2 t lashing capacity per tie-down point at a minimum spacing of 480 mm) * 3 x 13.4 t recessed lashing rings per side in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal members after the cranking, 1 x above the central axle next to the longitudinal member) Lowbed platform: * 3 x 13.4 t lashing rings per side on the outer frame (1 x at the start of the cranked platform, 1 x at the start of the access slope, 1 x at the end of the access slope) * 2 x 10 t lashing rings per side (1 x between the front wheel well and 1st axle, 1 x between the 2nd and 3rd axle) * 3 x 5 t lashing rings per side bolted to the outer frames of the wheel wells (2 at the front wheel well, 1 at the rear wheel well) ----Excavator arm rest: * Extended excavator arm rest from end of last rigid axle over steering axle to end crossmember, continuous with internal reinforcing profile approx. W = 770 mm x D rear = 270 mm / D front = 170 mm * 2 x 6.4 t lashing rings per side in the exca

Stanje: novo, including ramp shaft with ramps / closed loading platform with numerous lashing points / hand winch Technical specifications: • Brand: Martz Nodpfxox S Rm Ss Aibewf • Model: GT PLATEAU 450/2 S 2.7T • Vehicle type: Car transporter • Vehicle condition: New vehicle • First registration: Without first registration • TÜV/HU: 2 years from first registration • Internal dimensions (LxWxH): 449 x 211 x 0 cm • External dimensions (LxWxH): 600 x 215 x 89 cm • Permissible total weight: 2,700 kg • Unladen weight: 625 kg • Payload: 2,075 kg • Chassis: High-loader (wheels under the platform) • Tyres: 195/55R10C • Suspension: KNOTT rubber torsion axle • Jockey wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Phenolic plywood floor, anti-slip and waterproof • Including hand winch with brake • Ramp storage compartment under the loading platform • 2 x steel loading ramps included • Very sturdy welded steel frame • Frame fully hot-dip galvanized by immersion • 10x lashing eyes integrated in the side frame profile (600daN/kg) • Sideboards can be retrofitted at any time • Reverse automatic brake • KNOTT overrun device and parking brake • Very solid bolted V-drawbar, reinforced • 13-pin plug • Reversing light • Large format safety lighting • Integrated rear fog lamp • Rear frame lighting recessed • Rear left and right LED marker lights • Automatic jockey wheel fitted Optional accessories – please enquire: • 100 km/h approval with shock absorbers • Wheel chocks • Sideboards • Anti-theft device • Spare wheel • Storage box • Reversing light • Lashing straps • and more New vehicle with warranty and TÜV. - Financing or leasing possible - Nationwide delivery available - All prices include VAT - Vehicle registration document can be sent in advance or provisional license plates (Germany) can be provided - Export license plates including customs clearance available Descriptions and images are copyright protected!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you from stock! We have been specialist dealers & service workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many more brands for over 30 years. - Subject to errors, omissions, and prior sale -

Stanje: novo, največja dovoljena obremenitev: 14.660 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 19.0: * Wabco EBS brake system * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 10 t BPW Eco axles * Parabolic springs, 110 mm wide, with tandem equalizer unit * Drawbar with 50 mm flange towing eye and height-adjustable drawbar * Jost landing gear at the front * External folding supports at the rear * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * LED tail lights * 50 mm softwood floor * Preparation in front of the bulkhead for retrofitting container locks * Bolted smooth sheet metal front wall * Side walls made of trapezoidal profiled steel sheet, foldable with board spring lifter * Steel rear wall, insertable between the ramps (holder for unused panel inside the front wall) Nsdpfx Aiol Th Hwobowf * Bolted rear stanchions * Outer frame perforated and angled at approx. 45 degrees with 2 t lashing capacity every 480 mm * Possible installation of 3 t recessed lashing rings every 600 mm * In each corner front and rear: 1 x 10 t lashing ring; various holes in the front and end crossmembers for 1.2 t lashing options * Profifix lashing rail centrally along longitudinal axis for lashing up to LC 3,000 daN * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 620 mm (collapsible to 20 mm) * Rear approach slope approx. 860 mm * Chassis, drawbar, front wall, rear wall, ramps, and folding supports hot-dip galvanized * Side boards painted RAL 9010 pure white * Side wall painting in a RAL color available at extra charge * Axles, springs, air tank, flange towing eye, and landing gear painted in black * New vehicle with full manufacturer warranty * Errors and prior sale excepted * Available approx. from calendar week 21/2026 * Sample images