Temared Priklopnik Z Delovno Ploščadjo nakup rabljenega (40.813)

Stanje: rabljeno, prva registracija: 03/2002, naslednji pregled (TÜV): 03/2027, Oprema: ABS, Samo za izvoz Kjdpoy Dmq Djfx Alzenb Prodaja samo v tujino SPR 324 Kotschenreuther 3 osi

Stanje: rabljeno, največja dovoljena obremenitev: 27.500 kg, skupna masa: 33.000 kg, konfiguracija osi: 2 osi, prva registracija: 10/2024, dolžina tovornega prostora: 7.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 1.000 mm, prostornina tovornega prostora: 18 m³, Oprema: ABS, Izjemno robustna prikolica za betonske bloke, dolge materiale in kosovni tovor, zasnovana za zelo visoke točkovne obremenitve. Nova cena po ceniku Glorie: 91.500 EUR neto plus DDV. * Os 1: 9000 kg * Os 2: 9000 kg * SAF široke osi s kolutno zavoro za 22,5-palčno pnevmatiko * Stabilna jeklena varjena konstrukcija iz lasersko rezanih in upognjenih visokokakovostnih finozrnatih in oblikovalskih jekel * 4 Glorijine kombinirane tirnice za vstavne elemente iz kvadratnega profila 70x70 mm, nameščene po celotni dolžini v smeri vožnje Knedpfxozpc Nqs Alzsb * Vsaka vmesna prečka se lahko uporablja kot pritrdilna točka z nosilnostjo 2.000 daN * Dolžina nadgradnje približno 7.500 mm * Skupna dolžina približno 7.750 mm * Višina 1.200 mm * Višina stranske ograje 1.000 mm * Pomoč pri dvigovanju stranske ograje s pomočjo plinskih vzmeti z zaklepanjem v spuščenem položaju * Prisilno krmiljenje zadnje osi s pomočjo mehanskega prisilnega krmilnega sistema s 1 palico podjetja Tridec * Zračna vzmet vseh osi * Prva os je dvižna os * Zadnji podvozni ščit iz aluminijastega profila v skladu z veljavnimi smernicami * Šasija – varjena konstrukcija in čelna stena, popolnoma pocinkana * Škatla za orodje iz nerjavečega jekla * Delovne/luči za vzvratno vožnjo * Zadnje utripajoče luči LED * Kamera za vzvratno vožnjo * Kolutna zavora * ABS * Zračno dvigalo * 2 škatli za orodje * EBS * Podporne noge * SAF osi Vse informacije so podane brez jamstva / pridržana pravica do spremembe cen.

Stanje: novo, največja dovoljena obremenitev: 29.731 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.580 mm, širina tovornega prostora: 2.480 mm, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, Brand-new Kässbohrer K.SPS Platform Semi-Trailer Immediately Available Technical Data: * External length: 13,640 mm Kedpfxjqbn R Nj Alzjnb * Internal length: 13,580 mm * Axle spacing: 1,310 mm * Wheelbase: 7,700 mm * Overall width: 2,550 mm * Internal width: 2,480 mm * Gooseneck height: 200 mm * Fifth wheel height: 1,180 mm * Axle load: 27,000 kg * King pin capacity: 12,000 kg * Gross weight: 39,000 kg * Unladen weight: 6,269 kg * Pallet capacity: 33 Euro pallets load capacity Chassis: * BPW axles with air suspension and disc brakes * First axle liftable, automatic * Wabco brake system * Tyres: 6x 385/65 R22.5 * Axle pressure gauge Frame: * Made from high-quality, durable steel * KTL-coated steel front wall with interior plywood protection, 2,000 mm high * Hardwood floor, 30 mm thick, waterproof, with axle load capacity of 7,200 kg according to DIN EN 283 * Jost landing gears * LED lighting * Load securing system * K-fix with 96 holes per side, each lashing point rated for 2,500 kg * Additionally, 7x2 lashing rings on the floor with 5,000 kg capacity each * 6x2 container locks, suitable for 1x20 ft in the center, 2x20 ft, 1x40 ft container * Stake pockets outside + on the floor * Stake box underframe * Load securing certificate according to EN 12642 Code XL Other features: * 1x stainless steel toolbox * 4x oversize marker boards with LED lighting Chassis colour: MB 7350 Novagrau For further information, please do not hesitate to contact us.

Stanje: novo, največja dovoljena obremenitev: 37.581 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 15.850 mm, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, Brand new Kässbohrer Mega Tele HD platform semi-trailer with wheel recesses TECHNICAL INFORMATION: - Fifth wheel height: 950 mm - Overall length: 13,535 mm - Gooseneck length: 4,285 mm - Platform length: 8,950 mm - Extension: 6,900 mm - Locking position for extension: 500 mm - Gooseneck height: 120 mm - Platform height (loaded): 1,040 mm - Wheelbase: 7,700 mm - Axle load: 10 tons Knodpfxomtwyps Alzeb - Total width: 2,550 mm - Technical gross weight (80 km/h): 48,000 kg - Technical gross weight (60 km/h): 50,000 kg - Unladen weight: 10,419 kg RUNNING GEAR: - BPW axles with air suspension and drum brakes - 2x fixed axles at the front, 1x trailing steering axle at the rear - Air suspension with load gauge - Wabco braking system - Tyres: 12 units, size 245/70 R17.5 CHASSIS: - Chassis made of high-quality, high-strength S700 MC steel - 30 mm thick hardwood floor - 9x2 side extensions, extendable up to 300 mm - Telescopic rear stabilizer with 50 ton capacity - Rear mechanical folding supports with 45 ton capacity - Wheel recesses dimensions: 420 mm deep, 800 mm wide - Suitable for tyre diameter up to 1,800 mm RAMP: - Ramp receptacles at the rear of the vehicle LOAD SECURING: - Lashing rings - Stake pockets - Stakes - Container locks suitable for 1x20 ft, 1x40 ft, or 1x45 ft + 4 twist locks - Front wall made of steel, height 1,500 mm, Code XL certified ACCESSORIES: - 1x plastic toolbox - Stake box with capacity for 18 stakes - 1x rotating beacon - Wheel recess bridge for closing the recesses Chassis colour: RAL 3020 Traffic Red For further information, we are happy to assist you.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 10.320 kg, največja dovoljena obremenitev: 34.680 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2005, Proizvajalec: Faymonville Tip: IL2 / 3 osi Letnik: 2005 Lastna teža: 10.320 kg Nosilnost: 34.680 kg Knsdpfx Alez D Dvljzsb Skupna masa: 42.000 kg Dolžina: 13,30 m

Stanje: novo, največja dovoljena obremenitev: 34.815 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 15.850 mm, skupna širina: 2.550 mm, skupna višina: 1.040 mm, Leto izdelave: 2026, Oprema: ABS, Kässbohrer SPA Mega Extendable HD Platform Trailer Immediately Available TECHNICAL INFORMATION: - Fifth wheel height: 950 mm - Overall length: 13,535 mm - Gooseneck length: 4,285 mm - Platform length: 8,950 mm - Extension: 6,900 mm platform extension - Extension locking positions: 500 mm intervals - Gooseneck height: 120 mm - Platform height (loaded): 1,040 mm - Wheelbase: 7,700 mm - Overall width: 2,550 mm - Gross technical weight (80 km/h): 45,000 kg - Gross technical weight (60 km/h): 46,000 kg - Unladen weight: 10,185 kg CHASSIS: - BPW axles with air suspension and disc brakes - 2x rigid front axles, 1x rear trailing steering axle - Air suspension including load gauge - 1st axle liftable - Wabco braking system - Tyres: 445/45 R19.5 - 1x spare wheel carrier FRAME: - Chassis made of high-quality, high-strength S700 MC steel - 30 mm hardwood floor - 8x2 extendable side extensions up to 300 mm - Telescopic support winch at front with 50t capacity - Mechanically folding rear supports with 45t capacity RAMPS: - Provisions for ramps at the rear of the vehicle LOAD SECURING: - Lashing rings - Stake pockets - Container locks suitable for 1x20 ft, 2x20 ft, 1x40 ft, 1x45 ft - Steel front wall, 1,700 mm high, with Code-XL certificate Kedpfx Alsl N Syvjzonb ACCESSORIES: - 1x stainless steel toolbox - Stake holder at front wall - 2 x 2 oversize signs with LED lighting - Rotating beacon Chassis colour: RAL 3020 Traffic Red We are happy to provide further information upon request.

Stanje: rabljeno, največja dovoljena obremenitev: 58.880 kg, skupna masa: 75.000 kg, konfiguracija osi: > 3 osi, prva registracija: 06/2023, z zračnim vzmetenjem, hidromehanski prisilni sistem krmiljenja, enostavno teleskopično nakladalno površino, z dvodelno nakladalno rampo prevoženi kilometri: 37.800 lastna teža: 16.120 kg nosilnost: 58.880 kg, odvisno od vlečne enote Š = 11.300 mm STZ-L, prikolica s podaljškom - sprednji robovi nagnjeni pod kotom 45° Knedpfxsz Dzvcs Alzeb - oblikovana nakladalna površina 3.200 x 2.480 mm - hidromehanski prisilni sistem krmiljenja (krmiljenje z dvema krogoma) - ležajna plošča s krogličnim ležajem in zamenljivo 3,5-palčno kraljevsko vtičnico ter nastavljivim vodilnim klinom - obremenitev sedla: 25.000 kg - 30.000 kg - radij vrtanja: 2.300 mm - vrhunska škatla za orodje Nakladalna površina - izvedba: enostavno teleskopična - nakladalna površina je enostavno teleskopična, izvedena kot zunanja/notranja cevna konstrukcija - vmesna plošča: 300 mm - fiksna opora spredaj, dolžina 300 mm Podvozje - podvozje z zračnim vzmetenjem in 5 osmi, medosna razdalja: 1.360 mm - osi proizvajalca BPW, sestavljene iz ene vodilne osi in štirih hidromehanskih osi s prisilnim krmiljenjem, z maksimalnim kotom krmiljenja 45° - osi z nastavljivimi stožčastimi ležaji in avtomatskimi nastavljalniki (AGS) - dvižni ventil serijsko za spuščanje na min. 830 mm oziroma dvig na maks. 1030 mm (brez možnosti vožnje) Zadnji del vozila - izvedba: nagnjen za 500 mm - kratek previs 1.240 mm od sredine zadnje osi - 2 integrirani hidravlični podpiralni mehanizmi za podpiranje zadnjega dela vozila med nalaganjem Dvodelna nakladalna rampa z stopničasto površino - 2.900 + 1.400 x 880 mm - hidravlični dvižni mehanizem z ročno črpalko - hidravlična nastavitev rampe Zavorna naprava - dvovojna zavorna naprava za vsa kolesa s komprimiranim zrakom in membranskimi zavorami - avtomatska zavora, odvisna od obremenitve (ALB) - avtomatski nastavljalniki (AGS) - parkirna zavora s pomočjo cilindrov s pomnilnikom vzmeti - ABS zavora - aluminijaste stranske stene - možnost dviga (odvisno od obremenitve): 1 os - centralni sistem za mazanje "BEKA-MAX" - elektroagregat - daljinski upravljalnik Tehnični podatki Prikolica s podaljškom Nakladalna površina (DxŠ): 3.200 x 2.480 mm Nagib: 1.000 mm Višina sedla pri obremenitvi: 1.250 mm Radij vrtanja nazaj: 2.300 mm Nakladalna površina Nakladalna površina (DxŠ): 8.800 x 2.550 mm teleskopično nastavljiva za 6.600 mm v stopnjah na (DxŠ): 15.400 mm x 2.550 mm vključno z nagibom zadaj: 500 mm Višina nakladalne površine pri obremenitvi: približno 890 mm (-70 + 130 mm) Podvozje Medosjna razdalja: 4 x 1.360 mm Previs: 1.240 mm Krmiljenje 1. os: vodilno krmiljeno 2. – 5. os: hidromehanski prisilni sistem krmiljenja (krmiljenje z dvema krogoma)

Stanje: rabljeno, skupna masa: 3.500 kg, konfiguracija osi: 1 os, prva registracija: 09/1996, Leto izdelave: 1996, Oprema: žerjav, * Technische Daten: * Name: DENKA LIFT MK 25 *Clemens AB 25meter Kodpfx Asxzw Hzolzsnb Arbeitshöhe: 25,00 m / 200 kg Korblast: 200 kg / 2 Personen Drehbereich: 360° endlos Reichweite: 11,40 m / 80 kg Reichweite: 9,00 m / 200 kg Eigengewicht: 2.450 kg Arbeitskorb: 0,70 x 1,40 m Durchfahrtsbreite: 1,69 m Durchfahrtshöhe: 2,11 m Gesamtlänge: 9,07 m Gesamtlänge minimal: 8,30 m * Abstütz-Quadrat: 3,90 x 3,90 m * Ausstattung - 24 V Batterieantrieb mit eingebautem Automatik-Ladegerät - hydraulische Schnellabstützung - zweites Bedienpult am Unterwagen - 230 V Steckdose und Werkzeugablage im Korb - Winkelarm mit drehbarem Korb - manueller Notbetrieb - Sicherheitsüberwachung für Stützbeine und Überlast - stufenlose Proportionalsteuerung * Arbeitszeit von Mo bis Fr 07:30-12:00 13:00-18:00, Samstag 07:30-17:00. * E-Mail: * Tel/ Whatsapp/ Viber: Alexandar Ilic * Tel/ Whatsapp/ Viber English: Mladen Ilic

Stanje: rabljeno, največja dovoljena obremenitev: 2.186 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, prva registracija: 02/2026, dolžina tovornega prostora: 3.005 mm, širina tovornega prostora: 1.400 mm, višina nakladalnega prostora: 200 mm, skupna širina: 2.035 mm, skupna višina: 2.130 mm, A45 GW26G000189, Kedpfx Aeyqdqmelzsnb Transporter gradbenih strojev, proizvajalec STEMA, tip BMAT .2, Skupna masa: 2.700 kg, z jeklenimi nakladalnimi rampami, inercialna zavora, 100 km/h, 3,01 m x 1,40 m Vgrajeni blažilci za 100 km/h * Tandem nizek priklopnik, po izbiri z STEMA V-ojem ali centralno cevjo * Zvarjeno in v potopni kopeli vroče pocinkano podvozje iz masivne jeklene pločevine * Sprednja in stranske stene iz 3 mm debele varjene črne pločevine * 20 cm visoke zvarjene stranske stene * Celotno pohodno dno iz vezane plošče s protizdrsnim premazom (debeline 18 mm), po izbiri tudi dodatno aluminijasto rebrasto dno (debelina 3 mm) * Pohodna jeklena blatnika za enostavno vstopanje in izstopanje * 2 vzdolžna nosilca za optimalno porazdelitev tovora ... in še veliko več. Napake in vmesna prodaja pridržane.

Stanje: rabljeno, skupna masa: 2.100 kg, konfiguracija osi: 2 osi, prva registracija: 10/2021, skupna širina: 2.150 mm, skupna višina: 2.330 mm, Oprema: žerjav, Zelo dobro vzdrževana prikolica z dvižno ploščadjo, z višino delovanja 16 m, nosilnostjo košare 200 kg in stranskim iztegonom 9,45 m, ter priključkom za električno napajanje košare, vključno z agregatom. Pregled v skladu s predpisi UVV je opravila družba Paus marca 2026. GT 16 AG, dvižna ploščad Višina delovanja: 16 m Knsdpsznr Rbofx Alzob Izvedba s teleskopskim podstavkom Stranski iztegon: 9,45 m Nosilnost košare: 200 kg Električni priključek 220 V za košaro Vključno z generatorjem električne energije Funkcija vklop/izklop generatorja iz košare Popolnoma hidravlično podpiranje Širina podstavka: 4,08 m Dolžina podstavka: 4,29 m Neomejen obseg vrtenja Celotna dolžina: 6,31 m Širina za transport: 2,15 m Višina za transport: 2,33 m Teža: 2.100 kg Možnost financiranja preko naših partnerskih bank, z veseljem vam bomo pomagali. Izrecno si pridržujemo pravico do vmesne prodaje, saj ta izdelek ponujamo tudi na drugih platformah. Podatki o dodatni opremi so navedeni brez garancije. Pridržujemo si pravico do sprememb, vmesne prodaje ali napak. Priporočamo in močno svetujemo ogled in preizkus, da se pri kupcu ne bi pojavila napačna predstava o stanju in primernosti izdelka. Oglede in preizkuse lahko opravimo kadarkoli po predhodnem dogovoru in so izrecno zaželeni.

Stanje: rabljeno, največja dovoljena obremenitev: 76.000 kg, skupna masa: 107.000 kg, konfiguracija osi: > 3 osi, prva registracija: 04/2013, naslednji pregled (TÜV): 04/2027, Hidravlično dvižni in spuščani gooseneck XLE - odstranljiva in poenostavljena izvedba - satelitska plošča z ležajem v obliki krogličnega obroča, 3,5" kraljevi zatič in nastavljiv vodilni klin - vgrajeno hidromehanski dvojni sistem za krmiljenje za povezavo premičnih osi (krmiljenje na dva kroga) - hidravlično zaklepanje - hidravlična funkcija dviganja in spuščanja - hidravlično upravljanje diferenciala - prečni radij 2.800 mm za štiriosno sestavno vozilo - oblikovana nosilna površina (približno 3.600 x 2.480 mm) z rebrasto jekleno prevleko in poševnimi robovi na sprednji strani - zasnovan za tehnično obremenitev prikolice do - gooseneck izveden za neposredno pritrditev krempljev bagrovske premostitve, kot tudi za neposredno priklop prikolice z dvema osama Goldhofer prikolica z dvema osama s posebnimi kolesnimi nabojev THP/ET dve posamezni premični osi z hidravlično izravnavo osi, skupno 4 kolesa na os - širina prikolice 2.750 mm, medosna razdalja 1.400 mm - največja tehnična obremenitev osi na os 14 t (65 km/h) Knsdpfxjzuu Rdo Alzob - največji kot obračanja premičnih osi približno 70 stopinj - višina nakladalnega prostora v srednjem položaju 1.250 mm, obremenjena - hidravlični hod osi +/- 300 mm - dvokrožni hidromehanski sistem za krmiljenje - dvovodni zračni zavorni sistem na vsa kolesa s pomnilno vzmetjo za parkirno zavoro, zavorni sistem ALB in avtomatska nastavitev povezav (AGS) - zavora ABV (ABS) - hidropnevmatska plinska vzmet za shranjevanje pri vožnji z obremenitvijo, izklopna - 2 posebni priključni jeziček v posebni izvedbi na čelni strani prikolice, samo za priklop naslednjega poenostavljenega hidravličnega goosenecka - na zadnji strani okvirja integriran adapter v kratki in ozki kompaktni izvedbi za povezavo med prikolico in bagrovsko nizko podvozno premostitvijo - hidravlično zaklepanje na mestu ločitve adapter-bagrovska premostitev - dvojno delujoči cilindri za izravnavo osi Goldhofer - bagrovska premostitev 80 t, teleskopska z elementi za razširitev za predelavo v nizko podvozno premostitev Glavne značilnosti - Zasnovan za nosilnost 80.000 kg - Varjena konstrukcija iz fino zrnatega jekla StE 690, oblikovana kot cevni profil - Višina zunanje cevi 400 mm - Osnovne dimenzije (D x Š) približno 6.250 x 1.350 mm, postopoma podaljšuje se naprej za približno 6.750 mm do skupne dolžine približno 13.000 mm - Notranja cev (približno 600 mm široka) se pomika v okvir prikolice pod bagrovsko korito - Stranske stene zunanje cevi pripravljene za namestitev razširitvenih plošč - Na sprednji strani, na mestu pritrditve, fiksna prečna plošča, 1.350 mm široka - Polna nosilnost tudi, ko je bagrovska premostitev popolnoma izpotegnjena Goldhofer prikolica s štirimi osmi, tip THP/ET-korito, optimizirana posebna izvedba - dve posamezni premični osi z hidravlično izravnavo osi, skupno 4 kolesa na os - širina prikolice 2.750 mm, optimizirane medosne razdalje 2 x 1.310 + 1 x 1.400 mm - največja tehnična obremenitev osi na os 14 t. (65 km/h) - največji kot obračanja premičnih osi približno 60 stopinj - višina nakladalnega prostora pri obremenitvi 1.140 mm (+/-200 mm) - skupni hidravlični hod osi 400 mm - dvokrožni hidromehanski sistem za krmiljenje - dvovodni zračni zavorni sistem na vsa kolesa s pomnilno vzmetjo za parkirno zavoro, zavorni sistem ALB in avtomatska nastavitev povezav (AGS) - ABS - hidropnevmatska plinska vzmet za shranjevanje pri vožnji z obremenitvijo, izklopna - neprekinjeno bagrovsko korito v okvirju prikolice, globina 490 mm, širina približno 70

Stanje: novo, lastna masa: 4.400 kg, največja dovoljena obremenitev: 19.600 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.600 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5, medosna razdalja: 8.795 mm, Oprema: ABS, | Krone AD Jumbo plato prikolica 3-osna Nova | Multilock zunanji okvir po celotni dolžini | Zračno vzmetenje spredaj in zadaj (dviganje/spuščanje) | Vrtljivo podvozje z krožno kroglo, nizko vzdrževalni vrtljivi venec | Vlečna ušesa 40 mm | BPW osi z bobnastimi zavorami | Nosilec za rezervno kolo | Dimenzije (D x Š x V): 8,60 x 2,48 x 0,93 m | Jeklena čelna stena 1,60 m | Medosna razdalja: 8.795 mm | Pnevmatike 12x spredaj/zadaj: 235/75 R 17,5 | Pridržujemo si pravico do napak, vnosov in predhodne prodaje. Kodpey H Ilzjfx Alzenb

Stanje: novo, največja dovoljena obremenitev: 36.500 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, skupna višina: 1.250 mm, Oprema: ABS, MAX Trailer Type 210 NEW | Hydraulic steering – extendable | 36t payload | 3 axles | from €76,900 New vehicle – can be individually configured for your application. High payload with robust construction and maximum cost-effectiveness. Highlights: - Extendable loading platform with pneumatic locking - Numerous heavy-duty lashing points for maximum load securing - Hydro-mechanically forced-steered BPW axles with disc brakes - Air suspension with lift and lower function - WABCO EBS brake system in compliance with EU regulations - Mechanical JOST landing legs with 2-speed gearbox - LED lighting system - Tyre pressure monitoring system (TPMS) Construction & Durability: - High-strength fine-grain steel construction - Metallised chassis with premium corrosion protection - Multilayer paintwork with additional cavity sealing - Heavy-duty wooden floor in robust Omega profiles Included Options: - Convenient rear steering via cable remote control - Electro-hydraulic power pack - Galvanised front wall (approx. 1,200 mm) - EN 12642-XL body - 10 pairs of stake pockets for flexible load securing - Spare wheel holder under the loading area Ksdeypaz Sepfx Alzonb - Beacon holder - Reflective tape & European reflector plates - Air couplings at front Additional equipment and individual adaptations available at any time – we configure your vehicle exactly to your requirements. Sample photo. Equipment may vary depending on configuration.

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle with steering function and electro-pneumatic steering lock ----Suspension: * Air suspension with lifting/lowering system and RtR valve ----Electrics / Lighting: * Tire pressure monitoring system (TPMS) * Smartboard operator panel mounted on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon at rear left ----General attachments: * Side underrun protection * Landing legs at the front and mechanical swing supports at rear of chassis * Straight steel mudguards * Spare wheel carrier mounted under chassis, right side ----Low-loader platform: * Gooseneck platform with 45° chamfered front corners and tool box at the front made of galvanized steel, W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm high aluminum side boards (RAL 9010 pure white) foldable and removable, along the sides of the gooseneck platform * Rear panel 150 mm high, plug-in * Rear slope on the gooseneck platform leading to low-bed, approx. 700 mm long * Gooseneck platform with 50 mm wooden planks; low-bed platform with 60 mm wooden planks Knjdpfepk D I Aex Alzob * Tread plate over the axles ----Extensions: * 8 x mechanical folding extensions to a total width of 3 m (not on the rear slope, extension planks available with storage on gooseneck platform) * Mechanically adjustable warning panel sets, front and rear ----Load securing (Lashing package): * On the gooseneck platform: 2 x 6.3 t lashing rings per side and 3 x 5 t lashing bars per side on the outer frame * On the low-bed platform: 2 x 13.4 t lashing rings per side and 4 x 10 t lashing rings, swivel and lowerable, embedded in the outer frame * 2 x 6.4 t lashing eyes per side and 1 lashing ring at the rear, in the excavator-arm recess * 2 x container locks immediately after the step in the low-bed platform ----Excavator-arm recess: * Continuous from the end of the last rigid axle over the steering axle to the end cross member, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Access ramps: * Mechanical one-piece, hot-dip galvanized hydraulic access ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * Quadruple control block for future retrofitting of hydraulically lateral shifting ramps by customer * The outer plank on the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump output of 40 up to 120 liters/min in the truck) ----Loading dimensions: * Gooseneck platform loading area: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Loading height unladen: approx. 910 mm (incl. 860 mm approach slope) ----Fifth wheel height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paint/Finish: * Chassis, access ramps, rear folding supports, and extension brackets are hot-dip galvanized * Axles, landing legs, and air reservoirs are painted in a shade of black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale reserved * Sample images may show equipment not included in the offered vehicle ----Delivery time: * Available from week 38/2026

Stanje: rabljeno, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2013, Oprema: ABS, * Zračno vzmetenje * SAF osi Knedpfx Aljwtaz Ijzeb * Stranične letve * Twist-lock za kontejnerje * Lastna masa: 8.390 kg -----Interna številka vozila: 11009----Pridržujemo si pravico do napak in vmesne prodaje. WhatsApp podpora na voljo! Za vprašanja o vozilu ali dodatne informacije nam lahko pišete prek WhatsAppa. WhatsApp Nemščina, Angleščina -- WhatsApp Nemščina, Angleščina, Arabščina

Stanje: novo, največja dovoljena obremenitev: 39.070 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from specifications. Complete specification available upon request. Knjdpfx Ajyz E T Selzsb Chassis: * Welded construction made of high-quality steel profiles with punched cross-members. Designed for high point loads * Outer frame as UNP profile * Fifth wheel plate approx. 8 mm, underride guard nose approx. 700 mm wide Coupling Device: * 2-inch kingpin (also suitable for 3.5-inch reception) Underride Guard: * In accordance with EC regulations, bolted design Side Impact Protection: * In accordance with EC regulations Landing Legs: * 24 t landing legs with single-side operation (test load approx. 66 t), Jost Modul CH (Heavy Duty) S foot Axles: * 3 x 9 t air suspension axle assembly, manufacturer: SAF, with disc brakes approx. 430 x 45 mm, ABS, hub-piloted 10-hole wheels, offset 120 mm, total air suspension travel approx. 200 mm (lifting approx. 140 mm, lowering approx. 60 mm), control via rotary valve with locking function, with RTR function * Switch for second ride height (+ approx. 50 mm) mounted on lifting/lowering device bracket * Smartboard/TIM/Infocenter, no TPMS display Lift Axle: * First axle liftable, fully automatic load-dependent lift control, starting aid via button in the cab (15-pin socket PIN12). Button in cab is not included in delivery Brake System: * Two-line compressed air brake system according to EC guidelines with EBS and RSS, automatic load-sensing, spring-loaded cylinders as parking brake, non-reversible coupling heads fixed to front cross-member, without connecting line to motor vehicle, Wabco brand Tyres: * 6-fold, 385/65 R22.5 160J on 11.75 x 22.5 rims (brand of our choice), offset 120 mm * Basic version tyre pressure monitoring, connected to the EBS CAN bus system * Tyre pressure display in the cab (pre-installed by tractor manufacturer) Mudguards: * In accordance with EC, PVC mudguards (semi-shell) over all axles * Mud flaps with anti-spray Load Securing: * 8 pairs of welded hook plates in the outer frame (tensile strength approx. 3 t) * 6 pairs of lashing rings on the sides of the outer frame, evenly distributed (tensile strength approx. 10 t) Stake Sockets/Posts: * 5 pairs of stake sockets recessed in the outer frame, approx. 90 x 90 x 4 mm * 3 pairs of stake sockets recessed in the loading floor, approx. 90 x 90 x 4 mm * 10 removable posts made of galvanized square tubing, approx. 80 x 80 x 4 mm, stop at bottom Front Wall: * Bolted front wall, approx. 1,200 mm high, panelled with sheet metal Stake Magazine: * Magazine for removable posts inside front wall Floor: * Approx. 28 mm hardwood floor recessed in the outer frame, with galvanized omega steel profiles Lighting System: * EC-compliant, 24 volt with multi-chamber lights, LED side marker lights, LED front position lights white, LED rear outline marker lights, license plate lights * 1x15-pin and 2x7-pin sockets on the front cross-member Equipment: * Warning panel according to ECE 70 * 2 LED work lights on lamp bracket (switched via reverse gear) * Bracket for revolving beacon at rear (including beacon) * 1 rear access ladder, foldable and extendable (without platform) * 2 stainless steel toolboxes, approx. 450 x 450 x 450 mm, in front of front wall * Smartboard with axle load display * 2 LED work lights above the front wall, switchable via chassis frame switch * 2 LED work lights at the height of the support legs (switched via revers

Stanje: novo, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, Oprema: ABS, 1. Technical Data * Maximum permissible fifth-wheel load: 12,000 kg * Maximum permissible axle load: 24,000 kg * Maximum permissible gross vehicle weight: 36,000 kg (technically up to 39,000 kg) * Technical information for registration and manufacturer’s plate included. 2. Chassis and Superstructure * Welded ladder-frame construction in modular design * Multi Lock outer frame for flexible load securing * Load compartment length: 13,620 mm, load width: 2,480 mm 3. Protection and Safety * Rear underrun protection and side guard in accordance with EU directive * Rear access ladder * Two mechanical landing legs, single-sided operation 4. Axles and Running Gear * 3 axles, each with 9,000 kg load capacity * KRONE axles with air suspension and disc brakes (430 mm diameter) * Lift and lowering device as well as automatic lift axle control * First axle designed as a lift axle 5. Wheels/Tyres * 6 units, 385/65 R 22.5, M+S tread (mud and snow) * Smart Tyre Monitoring and TPMS (telematics services available) * Wheel nuts with protective caps 6. Brakes & Electrics * Braking system in accordance with ECE regulation 13 including ABS and EBS system Knsdpfx Aloyz Et Sjzob * Spring-loaded parking brake * Full-LED lighting, side marker lamps with indicator function, additional sockets 7. Floor & Interior * 30 mm thick, waterproof board floor, sealed * Rear portal through-loading height: 2,700 mm * Steel front wall with impact protection plate 8. Tarpaulin & Side Walls * PVC tarpaulin, sliding roof, reinforced and with tensioning device * White roof tarpaulin, contour markings on sides and rear 9. Other Equipment * Toolbox, pallet stop, warning plates, beverage transport certificate * Telematics Premium included for 24 months 10. Paintwork & Visual Appearance * Chassis deep black RAL 9005 * Rims silver natural * Side under-run protection white 11. Certificates * Load securing certificates according to EN 12642 XL and VDI 2700 Part 12 * EU Declaration of Conformity and Registration Certificate Part II

Stanje: novo, največja dovoljena obremenitev: 37.560 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 ton BPW axles * Start assist for shunting purposes on the first axle, activated via EBS (without truck-side installation) * Last axle is a trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle for maneuvering purposes from the driver’s cab via EBS (without truck-side installation) ----Suspension: * Air suspension with lift and lowering function as well as RtR valve Knedpfx Alsykx Nkozob ----Electrics / Lighting: * Smart-Board infotool mounted on trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * 2 additional LED reversing lights * 7-pin socket at rear for overlength lighting * Side marker lamps with indicator function * Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation) ----General Attachments: * Side underrun protection * Support legs at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall crossmember (without spare wheel) * Mechanically adjustable warning sign packages front and rear * Swing arm as a carrier for connecting lines from truck to semi-trailer ----Low Loader Platform: * 2nd king pin position * Gooseneck platform with 45° chamfered front corners and front-mounted toolbox made of galvanized, powder-coated sheet steel B = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm aluminum side boards (in desired RAL color) foldable and removable along the gooseneck platform * Rear wall, insertable, height 150 mm * Rear incline on the gooseneck platform to the low-bed approx. 700 mm long with checker plate covering and at the end a perforated strip for attaching aluminum approach ramps * Gooseneck platform with 50 mm clamped wooden planks, low-bed platform with 60 mm clamped wooden planks * Tread plate over axles * 9 mechanical extension panels to a total width of 3 m, not included in the rear incline (extension planks available with closed transverse stowage compartment under load floor) * Preparation for 3 storage recesses under the gooseneck platform for optional storage of aluminum approach ramps or planks for covering wheel recesses * Preparation for container locks on the swan neck ----Load Securing (LaSi Package): Gooseneck platform: * Perforated outer frame, 45° angled, with hole pattern for lashing devices (2 t lashing capacity per point with a minimum spacing of 480 mm) * 3 x 13.4 t lashing rings recessed into the floor per side (1 x on gooseneck platform, 1 x on longitudinal frame after the cranking, 1 x above middle axle next to longitudinal frame) Low-bed platform: * 3 x 13.4 t lashing rings per side at the outer frame (1 x start of gooseneck cranking, 1 x start of approach ramp, 1 x end of approach ramp) * 2 x 10 t lashing rings per side (1 x between front wheel recess and 1st axle, 1 x between 2nd and 3rd axle) * 3 x 5 t lashing rings per side screwed to outer frames of the wheel recesses (2 at front wheel recess, 1 at rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest from end of last rigid axle over the steering axle to the end cross member, continuous with internal reinforcing profile approx. W = 770 mm x T rear

Stanje: rabljeno, Leto izdelave: 2021, Load capacity 230 kg, power plug: Schuko 230V, used Magni electric scissor lift ES0807E. Load capacity: 230 kg (max), Drive: front-wheel drive 15 V / 0.5 kW, Lifting motor 17 V / 3.0 kW Tyres: Exmile tyres 323x100 mm Dimensions: Working height 7.8 m, platform height 5.8 m, overall length 1.86 m, overall width 0.76 m, platform dimensions 1.67 m x 0.74 m, platform extension 0.9 m, Stowed height 2.15 m (with guardrails upright), transport height 1.82 m (railings folded) Controls: Basket socket, onboard display, joystick for lift and drive functions, operating hours counter Safety features: Max. permitted number of persons 2, charging protection, anti-entrapment protection, pothole protection, overload cut-off, tilt control with warning, emergency lowering, automatic brake system, horn, speed limitation at maximum lift height, platform door with automatic lock, battery charge indicator, foldable guardrails Weight: 1,630 kg Climbing ability: 25 % Battery: 4x 6V / 170 Ah Charger: 24 V / 8.5 A Knjdpszdvxuefx Alzsb

Stanje: rabljeno, lastna masa: 7.660 kg, največja dovoljena obremenitev: 28.340 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2020, skupna dolžina: 2.550 mm, vzmetenje: jeklo-zrak, velikost pnevmatike: 205/65 R17,5, Oprema: ABS, | Wecon tip prikolice z nizko nosilno platformo | D: 13.860 mm, Š: 2.550 mm, V: 4.000 mm | Os SAF | Pnevmatike: 205/65 R17,5 | Skupna teža: 36.000 kg, nosilnost: 28.340 kg | Os 8.000 kg | Nakladalna rampa | Pridržana pravica do sprememb, napak pri vnosu podatkov in predčasne prodaje. Knodjz Apbaepfx Alzjb

Stanje: novo, največja dovoljena obremenitev: 29.400 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, skupna širina: 2.480 mm, skupna višina: 2.000 mm, Leto izdelave: 2026, Oprema: ABS, Brand new Krone Profil Liner SDP 27 3-axle platform semi-trailer * Krone axles Kjdpfxjvw Hlce Alzjnb * First axle as lift axle * Mechanical landing gears (12t) * Tyres: 385/65 R22.5 * 1x plastic toolbox * Pallet box for 24 Euro pallets * Coupling height: 1,150 mm * Spare wheel carrier * Reinforced front wall * MULTILOCK outer frame * 6 pairs of heavy-duty lashing rings * Stake pockets on the sides and in the centre * Six extendable stake pockets per side * Six lashing winches per side for cargo securing * 18 insertable stanchions * 4 illuminated oversize signs * Rotating beacon ORANGE Sample pictures For further information, please feel free to contact us.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 287.000 km, moč: 119,89 kW (163,00 KM), prva registracija: 08/2016, vrsta goriva: dizel, gorivo: dizel, barva: rumena, vrsta prenosa: mehanski, Leto izdelave: 2016, Oprema: kabelska vitla, Renault Master T35 2.3 dCi/165 PL Recovery Vehicle * PRICE: €27,900 + VAT * Ksdpfoxvik Iox Alzjnb YEAR OF REGISTRATION: 2016 MILEAGE: 287,000 km CATEGORY: USED FUEL: DIESEL TRANSMISSION: MANUAL DRIVE: FRONT-WHEEL DRIVE CHASSIS NUMBER: VF1VBU4Z255664024 FOR A DETAILED VIDEO OF THE VEHICLE, CONTACT TOMMASO AT 3922640499 ONLY WITH CHECCACCI, YOUR NEW PURCHASE WILL GUARANTEE: 🆗 CUSTOMIZED FINANCING 💡 PROFESSIONAL AND KNOWLEDGEABLE SALES CONSULTANCY 🚗 QUALITY STANDARDS 🔒 SECURE PURCHASE 🔧 CERTIFIED VEHICLE INSPECTION ✔️ 12-MONTH WARRANTY 💯 VEHICLE COMPLETENESS ⌛ PEACE OF MIND: WE HANDLE EVERYTHING! - OUR VEHICLES ARE INSPECTED IN OUR WORKSHOPS BY SPECIALIZED TECHNICIANS AND ACCURATELY PREPARED. THEY ARE ALSO CLEANED AND SANITIZED DURING PRE-DELIVERY BY INDUSTRY EXPERTS. - POSSIBILITY TO EXTEND THE WARRANTY UP TO 36 MONTHS 📍 WE ARE AT YOUR DISPOSAL AT OUR HEADQUARTERS IN VIA DEL LAZZERETTO 57, PRATO 59100 🕘 Monday–Saturday 09:00–13:00 ----- 15:00–19:00 Sunday closed Note: Technical specifications and options may, in some cases, differ from the actual equipment of the vehicle. checcacci srl declines any responsibility for unintentional discrepancies, which do not represent a contractual commitment.

Stanje: novo, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 800 mm, Leto izdelave: 2026, Oprema: ABS, takoj dobavljivo SEMI-PRIKOLICA S PLANDEKO ZA GRADBENI MATERIAL KÖGEL 3-OSNA SN24/ BW 800 mm/144 x žepov za kole (LENK) znamka/proizvajalec: KÖGEL EZL: NOVO VOZILO 2025 mere: 13.620 x 2.480 x 800 mm najv. dovoljena skupna masa: 35.000 kg lastna teža: 6.490 kg osna obremenitev: 15.000 kg zračno vzmetenje, dviganje/spuščanje kolutne zavore ABS EBS prevoženi kilometri: 0 osni proizvajalec: BPW ECO PLUS 3 / NOVO dvižna os dirka os os s sledenjem protiprašna tla stranice: 5 parov, 800 mm zložljivi koli: 3 pari sidrne obroče škatla za orodje barvanje nadgradnje: srebrna barvanje šasije: črna gume: 6-kratne stanje gum: 100 % pnevmatike zadnje osi: 385 / 65 R 22,5 IDEALNA SEDEŽNA PRIKOLICA ZA GRADBENI MATERIAL z bočnimi stranicami 800 mm, 5 parov z 21 pari sidrnih obročev po 2.500 kg zatezne sile z 8 x 18 žepi za kole, 80 x 80 mm (lahko se uporabljajo tudi kot sidrni obroči) 7.200 kg stabilna tla? dvižna os / DIRKA OS Ksdpeulqr Eofx Alzenb BPW ECO kolutne zavore 430 mm vozilo je možno uporabljati tudi kot ravno platformo MULTILOCK ZUNANJI OKVIR - po 2 t zatezne sile LASI 12642 XL z NACHLAUFLENKACHSE (os s trenjskim krmiljenjem) NOVO!!! sprednja stena zdaj iz ALU, 2.000 mm visoka TPMS senzorji za pritisk v pnevmatikah sedaj v platiščih slike so simbolične vse informacije so brez garancije, pridržujemo si pravico do predhodne prodaje! če imate vprašanja o tem ali katerem koli drugem vozilu, nas pokličite. if you have any questions for this or an other trailer / car please call us.

Stanje: novo, največja dovoljena obremenitev: 37.350 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Selection of equipment features. Full equipment specification available on request. Chassis: * Welded construction using high-quality steel profiles with through cross-members, designed for high floor and point loads, equipped with heavy-duty outer frame * Rear loading deck as a steel welded construction with two welded-on external driving tracks made of 5-hole steel plate (Lohr/Rolfo pattern) over a length of approx. 2,250 mm, hydraulically lowerable by approx. 350 mm * Integrated at the rear of the vehicle is a hydraulically extendable loading platform (approx. 1,500 mm) as a steel welded construction with 5-hole steel plate (Lohr/Rolfo pattern) cover, lighting mount, and two ramp compartments with ramp supports * Rear operation and control via an electric-hydraulic unit mounted in a stainless steel box on the left side of the chassis, operated by remote control * Power supply via the towing vehicle’s battery * NATO socket on the front wall (no connecting cable to tractor unit) Coupling device: * 2-inch kingpin, replaceable from below Underrun protection: * Fixed installation compliant with EC regulations Kjdpjy Up S Ssfx Alzenb Landing legs: * 2 x 12 t support winches with 2-speed gearbox Axles: * 3 x 10 t air suspension axle units, SAF brand with disc brakes approx. 370 x 45 mm, ABS, 10-stud hub-centered ET120 wheel connection, total air suspension travel approx. 200 mm (lifting approx. 140 mm, lowering approx. 60 mm), air suspension controlled via hand valve with stop function Steering axle: * 3rd axle as trailing steering axle with manual and automatic reverse lock Lifting axle: * 1st axle automatically liftable, additionally switchable via control on chassis frame or via pin 12 of lighting socket Tyres: * 6 units, 445/45R19.5 brand of our choice, mounted on 14.00x19.5 rims, 10-stud ET120 Mudguards: * EC-compliant, 1/4 PVC mudguards before and after the wheels on the 1st axle (front and rear), 2nd and 3rd axles (rear) Spare wheel holder: * None Brake system: * Two-line brake system according to EC with EBS, automatic load-dependent braking * Spring-loaded brake as parking brake acting on 2 axles, anti-swapping couplings fixed on front cross beam, no connecting line to tractor unit, Wabco brand Lighting system: * EC-compliant, 24-volt, multi-chamber rear lights, license plate lights, LED side marker lights, LED front position lights, and LED lane departure lights at rear, 15-pin socket as well as 2x7-pin sockets fixed on front cross beam, no connecting cables to tractor unit Load securing: * 9 pairs of folding lashing rings evenly distributed, tie-down force approx. 8 t * 7 pairs of folding lashing rings evenly distributed, tie-down force approx. 2.5 t * 2 pairs of folding lashing rings at rear, tie-down force approx. 2.5 t * Drilled holes for tension belts in outer frame every approx. 500 mm Stake pockets: * 16 stakes approx. 100/40 mm, usable length approx. 800 mm Stake pocket holders: * Each side 8 pockets integrated into outer frame * 4 rows of transverse stake pockets across the platform Floor: * Approx. 28 mm Z-hardwood floor set into outer frame Front wall: * Solid front wall, stake holder for 16 stakes approx. 100/40 * Front wall bolted to head frame Equipment: * 2 wheel chocks with holders * 2 PVC toolboxes, approx. 600/400/500 mm * Rear beacon holder including lamp * 2 pcs LED rear ...

Stanje: rabljeno, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2004, * trailing steering axle Knedpfx Alswi Edmjzeb * air suspension * front wall * unladen weight: 6,200 kg -----Internal vehicle number: 9150-----Errors and prior sale excepted.