Fliegl Tps 118 Bau Mit Heckan Tandem Plattf Rampen nakup rabljenega (11.813)

Stanje: rabljeno, največja dovoljena obremenitev: 7.500 kg, skupna masa: 10.700 kg, konfiguracija osi: 2 osi, prva registracija: 08/2003, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.000 mm, Oprema: ABS, id: 302473 TPS 100 Za več informacij pokličite: , +????? Za češki jezik pokličite: 420734511212 Fpjdpfx Alsycazle Heg

Stanje: novo, številka stroja/vozila: 195f80ad09517628522e33a91, lastna masa: 7.300 kg, največja dovoljena obremenitev: 16.700 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low Loader Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holders Aluminum side underrun protection Rear mudflaps across the entire width Quarter shell fenders in front of 1st axle 1st pair of wheel recesses embedded after the kink in the loading bed area, ramped entry, length at the bottom approx. 1600 mm, approx. 400 mm deep. Note! The frame in the main beam area is 400 mm higher than the wheel recess. 2nd pair of wheel recesses embedded between the axles in the loading bed area, ramped entry, length at the bottom approx. 600 mm, approx. 300 mm deep. Note! The frame in the main beam area is 300 mm higher than the wheel recess. Sliding extensions for widening, extendable to 3,000 mm (not in tail ramp area) (The track width of the construction machines or vehicles to be transported must not exceed the external frame width of 2,550 mm) Sliding extensions for widening, extendable to 3,000 mm, also at the bottom in the wheel recesses, foldable at the wheel recess extensions (extension not in the tail ramp area) (The track width of the construction machines or vehicles to be transported must not exceed the external frame width of 2,550 mm) 70 mm timber planks for extension to 3,000 mm Tie-down points on low loader 1 pair of lashing cutouts embedded in the longitudinal beam at the front in the kink, each rated at 10 t 4 pairs of lashing holes in the outer frame, each rated at 5 t (for attaching tie-down straps) 7 pairs of lashing mushrooms recessed at the top and side in the outer frame, each rated at 10 t 1x at the front in the kink 6x in the loading bed First lashing point 250 mm from the front and last max. 250 mm from the rear, spacing between lashing points no greater than 1,100 mm Drawbar for turntable trailer Drawbar with certified 40 mm towing eye Axles & suspension SAF drum brake axles Laser axle/chassis alignment – reduces tire wear and fuel consumption Parabolic spring suspension with maintenance-free steel-rubber bushings Wheels and tires 235 / 75 R 17.5 Fpodpfji Ri Rvjx Al Hjg Manufacturer's choice Steel rims in twin arrangement, factory silver Braking system 2-line compressed air braking system Spring-applied parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS connector at the front, with connection cable. Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrics 24 Volt, multi-chamber lights, LED side marker lights, 2 white position lights at the front 2 white/red lane guidance lights at the rear 2 x 7-pin fail-safe connectors at the front, with connection cable, 1 LED rotating beacon with holder, switched via side light (removable beacon) 2 pairs of warning panels, double LED illuminated and extendable to 3,000 mm Floor Front kink with steel/checkered plate covering Storage box embedded in the ramp to the kink, then with 70 mm softwood floor, in the wheel arch area with steel/checkered plate covering Tail ramp with 70 mm softwood floor Low loading area including tail ramp: 6,500 mm Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Wood-covered With spring assist Operating Instructions For 10,000 kg axle load an exemption is required, only indivisible loads allowed! The stated gross weight is technically possible, but depending on the type of load, the gross weight may not be achievable within the pe

Stanje: novo, številka stroja/vozila: e763c8c2bb3370bd2342236a4, lastna masa: 3 kg, največja dovoljena obremenitev: 8 kg, skupna masa: 11 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Central Axle Tipper Trailer Steel welded construction, continuous tipping shaft at the rear with 80 mm spherical tipping bearings Gearbox support leg at the front 2 wheel chocks with holders Steel underride protection Lockable storage compartment for loading ramps beneath the loading area Central axle trailer drawbar system Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 300 mm Axles & Suspension Euro axles (manufacturer’s choice), with tapered roller bearings and S-cam brakes Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalization (rocker balance) Wheels and Tyres 235 / 75 R 17.5 Manufacturer’s choice Factory silver steel rims Braking System Fpodpfji Rizbox Al Hog 2-line air brake system with color-coded line routing for easy service. Hand spindle parking brake Integral air reservoir Without ABS but with mechanical automatic load-dependent braking (ALB), max. 60 km/h registration 2 swap-proof coupling heads at the front, with connecting lines to the towing vehicle Electrics 12 Volt, multi-chamber lights, no side yellow LED lighting, side reflectors 2 white position lights at the front 2 white/red lane marker lights at the rear 1 x 7-pin 12 Volt plug at the front, with connection cable extended by approx. 60 cm Hydraulics Three-way tipper system, hydraulic multi-piston press with lift limitation and safety cable, Low-pressure cylinder up to max. 170 bar, without throttle. If required, throttle to be retrofitted on truck. Hydraulic connection with SVK plug NW 10/3, incl. connecting hose Operated hydraulically via truck PTO Tipping body Robust tipping body with 4 mm steel plate floor, steel side wall construction, continuous side walls, fold-down and pendulum-mounted with central locking at the bottom. Detachable corner posts at the rear. Tailgate fold-down and pendulum mounted, with central locking at the bottom. Bed length approx. 4,500 mm, side walls with 5 bottom hinges. Bed width 2,420 mm 5 pairs of lashing eyes in the floor, each rated at 5 t Operational notes The specified gross weight is technically achievable; depending on the cargo, the gross weight may not be attainable when observing permissible axle/support/kingpin loads. (Poor driving or trailing behavior possible due to incorrect load distribution) Country of Registration / Plates Country of Registration: Germany With Dekra inspection and certificate, for max. 60 km/h registration, towing vehicle LoF, (country of registration Switzerland max. 40 km/h possible) Prepared for single-line number plate holder Without contour marking / reflective tape as per ECE R 048, Paintwork Frame hot-dip galvanized including passivation, 15 years warranty against corrosion Side/tipper body RAL 3002 carmine red Note! If body is galvanized, it will not be painted! Note! Inside of body is only primed! Wide tyres available at extra charge: 355 / 60 R 18, loading height approx. 980 mm Attention: Archive pictures!

Stanje: novo, številka stroja/vozila: 207ad28f83705ed0d38a4f174, lastna masa: 3 kg, največja dovoljena obremenitev: 11 kg, skupna masa: 14 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235/75 r17,5, Further information Chassis Change Central-Axle Trailer Fine-grain steel welded construction Front stops, longitudinally adjustable and foldable Pair of removable guide rollers, front and rear 4 container locks with robust outriggers on 20-foot base for swap bodies 7.15 and 7.45 rear-flush (with 7.15 swap bodies not rear-flush, fork pockets/frame protrude) Telescopic support leg at front 1 pair gearbox support legs at front, with straight lower part and single-sided operation on FR right Wheel chocks with holder Aluminium side underrun protection Steel rear underrun protection Semi-shell mudguards Mounting for truck-mounted forklift at rear, including 2 fork insertion pockets, 2 extendable support tubes, holder for chain safety device with locking pin. Rear underrun protection with lighting unit, foldable. Includes 2 loose rubber buffers for rear wall protection; counterweight recommended! Note: Partial low ground clearance when fitted with forklift, potential poor trailing behavior, no warranty! (Forklift self-weight up to max. 1,500 kg for trailers). (With proximity switch for forklift control in combination with lift axle). Due to the forklift mount, axles are shifted rearwards; mind load distribution when driving without forklift—customer's risk! (For swap body trailers, driving with a forklift is only permitted in combination with a swap body). Forklift mount as per AU 203670 adapted for 7.45 m swap bodies. Counterweight at front between frames, approx. 300 kg, if required—exact assessment still pending Towing device for central axle trailer Drawbar with certified 50 mm towing eye, forwarding version (not suitable for trucks with tail lift, or final check required upon order) Lower coupling drawbar Drawbar without length adjustment Axles + suspension SAF drum brake axles as per manufacturer’s choice Axle/chassis laser alignment to reduce tire wear and fuel consumption Air suspension Brake system Two-line compressed air brake system Color-coded line layout for easy servicing Spring-loaded parking brake Duomatic connection at front with line to tractor unit, located FR-left Duomatic connection at front with line to tractor unit, located FR-right EBS electronic braking system with EBS plug at front and connection cable, FR-left Note: Trailer may only be towed by vehicles that ensure the effectiveness of ABS! With lift and lower valve, hold function in both raised/lowered position Vehicle stability system Wheels and tires 235/75 R17.5, brand at manufacturer’s discretion Twin arrangement steel rims, factory silver Electrics 24 volt, 4 x 3-chamber lights + 1 round reversing light and + 1 round rear fog light, side yellow LED lighting, protected installation! 2 white position lights at front 2 white/red lane marker lights at rear 1 x 15-pin plug at front with connection cable, FR-left 2 x 7-pin sockets at FR-left rear for truck-mounted forklift 1 x 15-pin socket at FR-left rear for truck-mounted forklift LED worklights to both sides behind the 2nd axle (switched via reverse gear) Extra LED worklight at rear, switched via reverse gear Approval / License Plates Germany With Dekra inspection and certificate (per §13 EU FGV) 24/7 service hotline Prepared for single-line license plate holder Fedpfsi Ri Iaex Al Hepg Contour marking with reflective strips per ECE R 048, white on sides and red rear Paint Frame in DB 7350 Novagrau 10-year warranty

Stanje: novo, številka stroja/vozila: ede0610378cbe39cc4883251d, lastna masa: 24.000 kg, največja dovoljena obremenitev: 7.550 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further information Chassis Low-loader Trailer Steel welded construction 1st pair of wheel recesses embedded in the driving lane area after the steel platform, bevelled for entry, approx. 1,400 mm long at the bottom, approx. 400 mm deep. Note! Frame is 400 mm higher in the main beam area than at the wheel recess. If machines are to be transported where overall height must be verified, we request a technical data sheet for the machine types with precise specifications (if overall height is exceeded -> customer is responsible, approval required). Depending on ground clearance under the machines, inserts for the wheel recesses may be required on the customer side. Turntable with robust ball race ring, storage box integrated in the turntable front section Rear supports foldable 2 wheel chocks with holder Aluminium side underrun protection Full-width rear mudflap Extending wideners to 3,000 mm (not in rear bevel area) (The track width of the construction machines or vehicles to be transported must not exceed the outside frame width of 2,550 mm) Central storage compartment for wooden planks on loading area 70 mm wooden planks for widening to 3,000 mm Lashing eyes low-loader Fodsi Ri Ryepfx Al Hepg 3 pairs of 10 t lashing points integrated in the floor at the front incl. 6 pairs of lashing mushrooms recessed on top and at the side in the outer frame, each 10 t 1 x at the gooseneck The remaining distributed between, spacing not greater than 1,200 mm 1 x rear bevel 5 pairs of stake pockets integrated into the outer frame, internal 70 x 40 mm (convertible to 5 t ring lashing eyes, not included) Drawbar assembly trailer turntable Drawbar with tested 40 mm towing eye Axles & Suspension SAF drum-braked axles Axles/chassis laser aligned to reduce tyre and fuel wear Parabolic suspension with maintenance-free steel-rubber bearings Brake system 2-line compressed air brake system Colour-coded piping for easy service Spring loaded parking brake 2 interchange-proof coupling heads at the front, with connecting lines to the tractor unit ABS and ALB, with ABS plug at the front, with connection cable Note: The trailer may only be towed by tractor units which ensure the functionality of ABS! Wheels and tyres 235 / 75 R 17.5 Manufacturer’s choice Steel rims in twin arrangement, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED illumination 2 white position lights at front 2 white/red track marker lights at rear 2 x 7-pin interchange-proof plugs at front with connecting cable 1 LED beacon with bracket, switched via parking light (removable lamp) 2 pairs of double warning boards, LED-lit and extendable up to 3,000 mm Floor Front area steel floor, incl. Then with 70 mm softwood floor, in wheel arch area steel/chequer plate covering Rear bevel with 70 mm softwood floor Low-loader deck incl. rear bevel 8,200 mm Loading ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable Wood-covered With spring lifting aid Operating instructions For 10,000 kg axle load, a special permit is required, only indivisible loads possible!!! The specified total weight is technically possible; depending on the load, the total weight may not be achievable while complying with permissible axle/kingpin/saddle loads. (Poor driving and tracking behaviour possible due to incorrect load distribution) Country of registration / Plates Country of registration: Germany incl. With Dekra approval and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for two-line number pla

Stanje: novo, številka stroja/vozila: bdf30cb8a53c70e900bdb40a7, lastna masa: 2 kg, največja dovoljena obremenitev: 9 kg, skupna masa: 11 kg, konfiguracija osi: 2 osi, velikost pnevmatike: -, Further Information Chassis Central Axle Tipping Trailer Steel welded construction, continuous tipping shaft at the rear with 80 mm spherical tipping bearing Gear support foot at the front 2 wheel chocks with holders Steel underrun protection Full-width rear mudflap Quarter-shell mudguards Lockable storage compartment for loading ramps beneath the load platform Central axle trailer drawbar system Drawbar with certified 40 mm towing eye Drawbar height-adjustable via spindle, max. adjustment range 300 mm Axles & Suspension BPW drum brake axles Axles/chassis laser-aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation (rocker equalization) Wheels and Tires 235 / 75 R 17.5 Fpjdji Riwispfx Al Heg manufacturer's choice Steel rims, factory silver Braking System 2-line air brake system with color-coded piping for easy service. Manual spindle parking brake Integral air tank ABS and ALB, with ABS plug at the front, including connection cable. Note: The trailer may only be towed by vehicles that guarantee ABS functionality! 2 non-interchangeable coupling heads at the front, with connecting lines to the truck Electrics 24 Volt, multi-chamber lighting, yellow LED side marker lights 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin non-interchangeable plugs at the front, with connection cable Hydraulics Three-way tipping system, hydraulic multi-piston cylinder with stroke limiter and safety cable Low pressure cylinder up to max. 170 bar, without restrictor. If required, the restrictor must be retrofitted on the truck. Hydraulic connection with SVK plug NW 10/3, incl. connecting hose Tipping operated hydraulically via truck PTO Tipper Body Robust tipping platform with 4 mm steel sheet floor, steel side wall construction, continuous side walls, foldable and swinging with central locking at the bottom. Removable rear corner stanchions. Rear wall foldable and swinging, with central locking at the bottom. Platform length approx. 4,500 mm, side walls with 5 bottom hinges. Platform width 2,420 mm 5 pairs of lashing rings in the floor, each rated for 5 tonnes Operating Notes The specified gross weight is technically feasible; depending on the cargo, the gross weight might not be attainable while complying with permissible axle/support/kingpin loads. (Poor handling or tracking may result from incorrect load distribution) Registration/Country & Plates Country of registration: Germany with Dekra inspection and report (according to §13 EC-FGV) 24/7 Service Hotline Prepared for single-line license plate holder Conspicuity marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame hot-dip galvanized including passivation 15-year anti-corrosion warranty against rust-through Side wall/platform RAL 3002 Carmine Red Rear support, loading ramps, and toolbox are optionally available at additional cost Note: Archive images

Stanje: novo, številka stroja/vozila: dc46d2e1cd272305b99fb3160, lastna masa: 9.800 kg, največja dovoljena obremenitev: 31.200 kg, skupna masa: 41.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Vehicle consisting of: Chassis low-bed semi-trailer Steel welded construction, kingpin plate with replaceable double kingpin and two kingpin positions 24-ton, 2-speed landing gear, single-sided operation, straight lower section, without thrust compensation Foldable rear support 2 wheel chocks with holders Side underrun protection, aluminum Quarter mudguards in front of and behind the axle assembly 1st pair of wheel recesses embedded in the low-bed drive lane area after the gooseneck, tapered for entry. Lower length approx. 1,600 mm, recess depth approx. 260 mm. Note! Frame in the main beam area is 260 mm higher than the wheel recess. 2nd pair of wheel recesses between axles A and B. Lower length approx. 350 mm, depth approx. 260 mm. Note! Frame in the main beam area is 260 mm higher than the wheel recess. If wheel loaders are to be transported and the total height needs to be checked, please provide technical data sheets of the wheel loader types with exact information (if total height is exceeded -> customer responsibility, approval required), (depending on ground clearance under the machines, inserts in the wheel recesses may be required by the customer) Wheel recess covers extendable from the main frame, with wooden inserts. Extensions extendable to 3,000 mm (not in the rear bevel and not in the lower wheel recesses). (The track width of construction machines or vehicles to be transported must not exceed the external frame width of 2,550 mm.) Storage compartment for wooden planks on the gooseneck, crosswise at the front 70 mm planks for extension to 3,000 mm Lashing eyes low-bed trailer 2 pairs of ring lashing eyes, each 5t at the front on the gooseneck 11 pairs of lashing mushrooms recessed at the top and side in the external frame, each 10t 2x on gooseneck, 9x distributed on low-bed platform; first lashing point 250 mm from the front and last at max. 250 mm from the rear, distance between lashing points no greater than 1,100 mm 8 pairs of stake pockets recessed in the external frame, internal dimensions 70 x 40 mm, or instead of stake pockets, 5t ring lashing eyes recessed in the floor Axles & Suspension SAF drum brake axles Axles/chassis laser-measured to reduce tire wear and fuel consumption Air suspension Wheels and tires 235 / 75 R 17.5 as per manufacturer's choice Steel rims in twin arrangement, factory silver Brake system 2-line compressed air braking system Spring-loaded parking brake EBS, electronic braking system with EBS socket at the front, without connection cable Attention: The trailer may only be towed by tractors that ensure the effectiveness of ABS! 2 non-interchangeable coupling heads at the front, without connecting line with lift & lower valve Axle load detection via EBS CAN bus signal, for display in the driver's cab (truck must be pre-equipped accordingly, not installed on truck; not a calibrated scale) Vehicle stability control system Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane mark lights at the rear 2 x 7-pin, non-interchangeable sockets at the front, without connection cable 1 x LED beacon with holder, switched via parking light (lamp removable) 2 pairs of warning panels, double LED illuminated and extendable to 3,000 mm, removable with plug Fedpfx Aoi Ri Hcjl Hopg Floor Gooseneck with steel/chequer plate covering Storage box embedded in the sloped transition to gooseneck Then with 70 mm softwood floor; in the lower wheel recesses and w

Stanje: novo, številka stroja/vozila: 3c70e9a5d82cfb3ada79baf95, lastna masa: 8 kg, največja dovoljena obremenitev: 17 kg, skupna masa: 26 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 205 / 65 r 17,5, Further Information Chassis: Semitrailer Logistics Fine-grained steel welded construction, fifth wheel plate with interchangeable 2-inch kingpin, rear bevel approx. 1920 mm, continuous ramp hanging bar at the rear and at the front of the gooseneck, ground rollers at the rear, lowered deck (deep bed) after the step-down up to the axle assembly. Drawing release from the customer required upon order! Pair of lashing mushroom pins recessed on top and side in the outer frame, each rated for 10t Pair of lashing eyes recessed in the outer frame on the gooseneck, each rated for 5t Fsdpfx Aloi Ri Hro Hepg 24t two-speed landing gear, single-sided operation, with straight lower part, without compensating plate Foldable rear support, mounted externally Wheel chocks with holder Side underrun protection – aluminum Rear underrun protection – steel, for EU, where technically possible Quarter-shell mudguards With anti-spray mudflaps according to EU regulations 1 pair of wheel recesses recessed after the gooseneck in the deep-bed lane area, sloped for easier entry. Bottom length approx. 1840 mm, recess depth approx. 200 mm. Second pair of wheel recesses at rear bevel. Depth approx. 200 mm. Note! Frame in the main beam area is 200 mm higher than the wheel recess. Detailed technical inspection required upon order. Removable wheel recess covers from the deep bed with hardwood inlays, at rear bevel with hardwood inlays. Electric cable winch, 24 volts, pulling force 5500 kg, mounted in the gooseneck step-down, does not reach into load area, operated by remote control, cable length 35 m × approx. 10 mm, with roller fairlead and detachable guide roller at the rear bevel. Axles & Suspension SAF or BPW drum brake axles at our discretion Air suspension with raise & lower valve + auto-reset function Wheels and Tires 205/65 R 17.5 tires with 129/127K (132/132G) rating for 8t tire load capacity at max. 90 km/h, preference of manufacturer Steel twin wheels, factory silver Brake System 2-line compressed air brake system Spring-actuated parking brake 2 interchangeable coupling heads at front, without connecting line EBS by Haldex, electronic braking system with EBS socket at front, without connecting cable (brake calculation sent to customer for approval, 15.07.2021) Attention: The trailer may only be towed by tractor units that ensure ABS effectiveness! Axle load detection via EBS CAN bus signal, display in the driver’s cab possible (truck must be properly prepared, not installed, not a calibrated scale) Electrics 24 volts multi-chamber rear lights, lateral yellow LED lights 2 white position lights at front 2 white/red outline marker lights at rear 2 × 7-pin and 1 × 15-pin interchangeable sockets at front, without connecting cable Floor Gooseneck with steel/checker plate covering 30 mm phenolic resin plywood floor, in deep bed between main rails In the drive lane area with serrated grating, in wheel recesses with steel/checker plate covering Ramps Pair of aluminum ramps, 3,200 mm long, load capacity 12,000 kg per pair Pair of steel ramps for entry into deep bed Pair of steel ramps for crossing gooseneck Sidewalls Approval / Signage Registration country: Germany With DEKRA inspection and certificate (according to §13 EC-FGV) Prepared for single-line license plate holder Contour marking with reflective strips as per ECE R 048, yellow at sides and red at rear Warning plate as per ECE-70 Paintwork Frame painted RAL 9018 Papyrus White Support feet coated black Attention: Archive ima

Stanje: novo, številka stroja/vozila: 7dbf076fea9ec110acb399f8f, lastna masa: 5 kg, največja dovoljena obremenitev: 32 kg, skupna masa: 38 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 385/55 r22.5, Further Information Chassis Semi-Trailer Container Fine-grained steel welded construction, kingpin plate with replaceable 2" kingpin and 2 kingpin positions Container Mounts: Rear Extension Retracted: 1 x 20 ft or 1 x 30 ft flush with rear Central telescopic section 1st stage, rear extension extended 1st stage: 2 x 20 ft or 1 x 40 ft with and without gooseneck tunnel Central telescopic section 2nd stage, rear extension extended 2nd stage: 1 x 45 ft with gooseneck tunnel and extended over the rear Central telescopic section 2nd stage, front extension extended 1st stage, rear extension extended 2nd stage: 1 x 45 ft with long gooseneck tunnel and bevelled corners Central telescopic section as interlocking central tube frame with bolt locking with rear height adjustment and foldable central supports for containers without tunnel Front container guide plug-in and removable (electrics, air, and brake connections at the front cross member) Plug adapter for front locking to secure containers without tunnel from underneath, with bracket for storage when not in use Front extension mounted on rollers, manually extendable (for 45 ft containers with long tunnel) Rear extension mounted on rollers, with hand crank 24 ton, 2-speed landing gear, single-sided operation, with semi-round base and straight mounting plate, with travel equalizer 2 wheel chocks with holder Side underrun protection in aluminium Rear underrun protection, galvanized steel Rear underrun protection extendable for 45 ft containers Half-shell fenders with anti-spray flaps as per EC regulations Rear impact protection Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axles/chassis laser measured to reduce tire wear and fuel consumption Axle spacing staggered mm (intermodal transport) up to 44 t gross train weight Air suspension 1st axle automatic lift axle, incl. forced lowering and traction aid, activation by applying brakes 3x (traction aid is functional up to 30% axle overload and a maximum speed of 25 km/h) Braking system 2-line compressed air braking system Color-coded line routing for easy servicing Spring-loaded parking brake Tele Control Axle relief for easy telescoping 2 non-interchangeable coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connection cable Attention: The trailer may only be towed by tractor units that ensure the ABS operates effectively! with raise & lower valve Vehicle stability control system Axle load recognition via EBS CAN bus signal, for display in the driver’s cab; the truck must be accordingly prepared, no truck installation (not a calibrated scale) Wheels and Tires 385/55 R22.5 make at manufacturer’s discretion Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, rear and brake lights in LED, side yellow LED lighting (Note! With certain tractor units, incorrect diagnostics may appear, even when function is assured) 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin non-interchangeable sockets at front, without connection cable Operating Instructions When transporting a 45 ft container with a short tunnel, with or without front extension, the permissible system length from kingpin to rear edge and the total towing length of 16,500 mm is exceeded! The rear underrun protection must be extended manually! An exemption permit pursuant to § 70 StVZo is required! Country of registration/plates Fpedpfsi Ri R Sox Al Hjg Germany Approval as per EC 2007/46

Stanje: novo, številka stroja/vozila: 1f4581c873ed977cb9602039b, lastna masa: 3 kg, največja dovoljena obremenitev: 34 kg, skupna masa: 38 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 385/65 r22.5, Further information Chassis: Semi-trailer Container Fine-grained steel welded construction, fifth wheel plate with replaceable 2" kingpin. Container mounts: 1 x 20 ft centered (or swap body container 7.15 / 7.45), front not retractable, twistlocks for the longer version of the container restraint 24 t 2-speed landing gear, single side operation, with straight base, without compensating rod Fpedpoi Rixkefx Al Hjg 2 wheel chocks with holder Side underrun protection Aluminum rear underrun protection Half-shell mudguards With anti-spray mudflaps according to EC Stainless steel drip tray with 1 1/4 inch drain pipe + 1 1/4 inch shut-off valve, including drip plate, with perforated tread plates, approx. 400 mm wide, left and right between drip tray and longitudinal beam 4 hose storage compartments approx. 4500 mm long (hose box) for hose pipes 2 x DN 200 (outer) + 2 x DN 160 (centered), at the rear a hose box (stainless steel) 300 mm deep, splash-proof, lid (stainless steel) with all-round rubber seal, drain hole at lowest point, then without lid on hose pipes 1 stainless steel grounding lug in the right rear of the frame, with international grounding label on the frame Access steps rear right on underrun protection, at the rear right outside on main beam tread plate approx. 260 mm long and 300 mm wide Axles & suspension SAF disc brake axles Axle/chassis laser alignment reduces tire wear and fuel consumption Offset axle spacing mm (intermodal transport) up to 44t gross train weight Air suspension 1st axle automatic lift axle, including forced lowering and traction aid, actuation 3x brakes (traction assist functions up to 30% axle overload and at speeds of max. 25 km/h) Brake system 2-line compressed air brake system Color-coded line routing for easy service Spring chamber parking brake 2 interchangeable coupling heads at front, without connecting line EBS, electronic braking system with EBS socket at front, without connecting cable Note: This trailer may only be towed by towing vehicles which ensure the effectiveness of ABS! With raise and lower valve Vehicle - driving stability system Axle load detection via EBS CAN bus signal, for display in the cab (truck must be prepared for this, not installed on truck, not a calibrated scale) Wheels and tires 385/65 R22.5 brand at manufacturer's choice Steel rims, factory silver Electrics 24 volts, multi-chamber lights, side yellow LED lighting 2 white position lights in front 2 white/red lane marker lights at rear 1 x 15-pin socket in front, without connecting cable Operating notes The specified gross weight is technically achievable; depending on the cargo, the permitted axle, support, and fifth wheel load limits may restrict the achievable gross weight. (Poor driving and tracking behavior possible due to incorrect load distribution) This vehicle may only be loaded with 20’ tank containers compliant with ISO 668 and especially ISO 1496-3! The tank containers must have "end load-transfer areas" (end crossbeam load transfer zones)! Country of registration / plates Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for single-line license plate holder Warning panel according to ECE-70 ADR approval according to 9.1.1.2 of the ADR, EX/II, EX/III / Approval certificate for vehicles for the transport of certain dangerous goods (ex.B3) with warning panel at rear, not valid for substances according to UN 0331 and 0332 (explosives B-E) Outline marking with reflective strips

Stanje: novo, največja dovoljena obremenitev: 13.200 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.500 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 860 mm, skupna širina: 2.550 mm, Gross vehicle weight: 18,000kg / 21,000kg Unladen weight: 4,800kg Payload: 13,200kg / 16,200kg Overall length: 9,450mm Load length: 7,500mm incl. rear bevel Width: 2,520mm Loading height: 860mm Additional information: - Chassis painted in stock colour Nova grey - Wooden floor 70 mm - Steel ramps, 2,800mm long x 750mm wide, laterally adjustable - With spring lift assistance - Foldable rear supports Fpodpfx Aor Da Uvsl Heg - Aluminium side underrun protection - Plastic toolbox - 3m widening package - Large lashing package – 5 pairs of ring lashing eyes recessed in the outer frame (convertible to stake pockets), each rated at 5 tonnes; 7 pairs of lashing mushrooms recessed on top and side of the outer frame, each rated at 10 tonnes - 50mm drawbar eye - Air suspension - Lift and lower valve - Axle load detection via EBS CAN bus signal - Tyres: 235/75R17.5 - 2 x 7-pin connectors at front - LED revolving beacon - 2 pairs of double warning boards, LED illuminated, extendable to 3m plus advance transport/setup from warehouse 26639 Wiesmoor: €1,280.00 net

Stanje: novo, največja dovoljena obremenitev: 14.660 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 19.0: * Wabco EBS brake system * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 10 t BPW Eco axles * Parabolic springs, 110 mm wide, with tandem equalizer unit * Drawbar with 50 mm flange towing eye and height-adjustable drawbar * Jost landing gear at the front * External folding supports at the rear * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * LED tail lights * 50 mm softwood floor Fjdpfjl Th Hwex Al Hopg * Preparation in front of the bulkhead for retrofitting container locks * Bolted smooth sheet metal front wall * Side walls made of trapezoidal profiled steel sheet, foldable with board spring lifter * Steel rear wall, insertable between the ramps (holder for unused panel inside the front wall) * Bolted rear stanchions * Outer frame perforated and angled at approx. 45 degrees with 2 t lashing capacity every 480 mm * Possible installation of 3 t recessed lashing rings every 600 mm * In each corner front and rear: 1 x 10 t lashing ring; various holes in the front and end crossmembers for 1.2 t lashing options * Profifix lashing rail centrally along longitudinal axis for lashing up to LC 3,000 daN * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 620 mm (collapsible to 20 mm) * Rear approach slope approx. 860 mm * Chassis, drawbar, front wall, rear wall, ramps, and folding supports hot-dip galvanized * Side boards painted RAL 9010 pure white * Side wall painting in a RAL color available at extra charge * Axles, springs, air tank, flange towing eye, and landing gear painted in black * New vehicle with full manufacturer warranty * Errors and prior sale excepted * Available approx. from calendar week 21/2026 * Sample images

Stanje: novo, največja dovoljena obremenitev: 14.660 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 19.0: * Wabco EBS brake system * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 10 t BPW Eco axles * Parabolic springs (110 mm wide) with tandem equalizing unit * Drawbar with 50 mm flanged tow eye and height-adjustable drawbar * Jost landing gear at the front * Rear external folding supports * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * LED tail lights * 50 mm softwood flooring * Preparation in front of the bulkhead for retrofitting container locks * Bolted smooth sheet metal bulkhead * Sidewalls made of trapezoidal-profiled steel sheet, foldable with drop-side spring lifting device * Steel rear wall, can be inserted between the ramps (storage bracket inside front bulkhead when not in use) * Bolted rear stanchions * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to fit 3 t folding lashing rings every 600 mm * In each front and rear corner 1 x 10 t lashing ring; various holes in the front and rear crossmember for 1.2 t lashing options * Profifix lashing rail mounted centrally along longitudinal axis, lashing capacity up to LC 3000 daN * One-piece mechanical grid ramps with spring mechanism for single-person operation, approx. 2,750 x 620 mm (can be pushed together to 20 mm) * Rear drive-on slope approx. 860 mm * Chassis, drawbar, bulkhead, rear wall, ramps, and folding supports hot-dip galvanized * Platform sidewalls painted in RAL 9010 pure white * Sidewalls can be painted in any RAL color at extra cost * Axles, springs, air tank, flanged tow eye and landing gear painted black * New vehicle with full manufacturer’s warranty * Errors and prior sale excepted * Available approx. from week 21/2026 Fodpfxel Th Hlo Al Hopg * Example images

Stanje: novo, največja dovoljena obremenitev: 30.310 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, NEW VEHICLE Fliegl 4-axle low loader with 2 pairs of wheel recesses and ramps Gross weight: 40,000 kg Payload: 30,310 kg Unladen weight: 9,690 kg Overall length: 12,000 mm Loading length: 10,000 mm Loading bed: 7,150 mm including 850 mm drive-on slope Loading height: 900 mm Fpsdpfxsnzlg Ds Al Hsg 1st pair of wheel recesses after drop in the loading bed, length at bottom approx. 1,600 mm, 400 mm deep 2nd pair of wheel recesses between the axles in the loading bed, length at bottom 600 mm, 300 mm deep Extensions to 3,000 mm, warning boards, rotating beacon, comprehensive lashing package 5 pairs of stake pockets in the outer frame Excavator arm recess, 1,800 mm long, 150 mm deep Drawbar 50 mm Air suspension with raise/lower valve, separately operable BPW drum brakes Tyres: 235 / 75 R 17.5" Axle load detection via EBS CAN bus signal, Trailer Info Center Ramps: 2,800 mm x 750 mm, hydraulically operated Hydraulic lateral displacement Hire purchase offer: term 48 months, residual value 40%, down payment only the VAT on the installments, monthly payment EUR 970.00 net Vehicle available from 11.09.2023 from the Neumünster trade fair. Visit us at Nordbau - Stand West 121, right next to the main entrance. Further 3-, 4- and 5-axle low loaders new and used available immediately

Stanje: rabljeno, največja dovoljena obremenitev: 13.560 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 02/2012, naslednji pregled (TÜV): 02/2026, dolžina tovornega prostora: 7.300 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.700 mm, prostornina tovornega prostora: 48 m³, * 18t Sonntag bodywork with air suspension in reinforced design * Gigant axles / air suspension / drum brakes / rear support legs / height and length adjustable drawbar / sliding tarp / portal doors / 50 mm towing eye with air coil and Duomatic coupling Fodox Nb H Djpfx Al Hepg ----As viewed or offered, without additional services or accessories. Our offers are generally without new TÜV inspection. If a new TÜV inspection is required, we are happy to provide a quote from our partner workshops! The vehicle may be covered with advertising stickers and/or lettering. Our general terms of delivery and payment apply. We support you with export procedures, preparation of export documents, procurement of license plates, supplier declarations, etc.! The information provided in advertisements, on the Internet, price tags, and images are non-binding descriptions and are not guaranteed characteristics. The seller assumes no liability/warranty for typographical or data transfer errors. Stated equipment should be separately verified if necessary. We explicitly reserve the right to prior sale, as we also list this item on other platforms. Accessories indicated are subject to change without notice. Alterations, prior sale, or errors excepted. We offer and strongly recommend an inspection and examination in order to avoid any misunderstandings regarding the condition and suitability by the buyer. The vehicle and tarp may be labeled; images may be edited. We sell exclusively in accordance with our terms and conditions, with any warranty excluded. Inspections and examinations are possible at any time by appointment and are expressly recommended.

Stanje: rabljeno, največja dovoljena obremenitev: 28.933 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2015, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.490 mm, višina nakladalnega prostora: 3.000 mm, prostornina tovornega prostora: 101 m³, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Oprema: ABS, * Edscha pomična streha * Haldex EBS, ABS, LSV * Dvižna os * Škatla za orodje * BPW Eco Plus osi z disk zavorami ----* Dimenzija pnevmatik: 385/55R19,5 * Skupna dolžina: 13.850 mm * Lastna masa: 6.067 kg * TÜV & SP: potekel -----Pridržujemo si pravico do napak in vmesne prodaje Številka vozila 5726 WhatsApp podpora na voljo! Fodpfx Aevhvcfel Hopg Za vprašanja glede vozila ali dodatne informacije nam pišite preko WhatsAppa Whatsapp Whatsapp

Stanje: rabljeno, največja dovoljena obremenitev: 28.933 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2015, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.490 mm, višina nakladalnega prostora: 3.000 mm, prostornina tovornega prostora: 101 m³, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Oprema: ABS, * Edscha pomična streha * Haldex EBS, ABS, LSV * Škatla za orodje * BPW Eco Plus osi z disk zavorami Fodjvhv H Rjpfx Al Hjpg ----* Dimenzija pnevmatik: 385/55R19,5 * Skupna dolžina: 13.850 mm * Lastna teža: 6.097 kg * TÜV & SP: potekel -----Napake in vmesna prodaja pridržane Številka vozila 5732 Podpora prek WhatsApp na voljo! Za vprašanja glede vozila ali dodatne informacije nas preprosto kontaktirajte prek WhatsApp

Stanje: novo, največja dovoljena obremenitev: 8.800 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.370 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-R 11.9: ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders Fjdol Th Nropfx Al Hepg * Drum brakes, 2 x 5.5 t ----Axles: * Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Drawbar height adjustable by 300 mm * 40 mm flange towing eye ----General Attachments: * Jost landing gear front * Rear external folding supports * Plastic toolbox front right, outside on the front wall * Side underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * LED lighting ----Loading Platform: * Loading platform 5.37 m * 50 mm softwood flooring * Bolted front wall made of smooth sheet steel * Side walls made of trapezoidal-profile steel sheet, foldable with drop-side spring assist * Rear wall made of steel, can be slid in between ramp mounts, stored inside in front of the front wall when not in use * Rear stanchions bolted ----Load Securing: * Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in the front and rear cross-members for 1.2 t lashing options ----Ramps: * One-piece mechanical mesh loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compacted to 20 mm) * Rear approach incline approx. 860 mm chassis ----Tyres: * Tyres 235/75 R 17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Drawbar, front wall, tailgate, folding supports, and loading ramps hot-dip galvanized * Axles, springs, air tanks, and 40 mm flange towing eye painted in black * Drop-sides painted in RAL2011 deep orange * Painting of the side walls in any RAL colour available at extra cost ----Info: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.800 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.370 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-R 11.9: ----Brakes: Fjdpfxsl Th Nco Al Hspg * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes, 2 x 5.5 t ----Axles: * Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar by 300 mm * 40 mm flange towing eye ----General Attachments: * Jost landing gear at the front * External folding supports at the rear * Plastic toolbox, front right outside on the front wall * Side underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * LED lighting ----Loading Platform: * Platform length 5.37 m * 50 mm softwood floor * Bolted smooth sheet steel front wall * Fold-down side walls made of trapezoidal-profiled steel sheet with board lifting spring * Rear wall made of steel, insertable between the ramp holders for storage in front of the front wall when not in use * Rear stanchions bolted ----Load Securing: * Perforated outer frame, approx. 45-degree bent, with 2 t lashing capacity every 480 mm * Installation of 3 t recessed lashing rings every 600 mm possible * In each corner front and rear, 1 x 6.3 t lashing ring * Various holes in front and rear crossmembers for 1.2 t lashing options ----Ramps: * One-piece mechanical grating loading ramps with spring system for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm) * Rear approach angle approx. 860 mm chassis ----Tyres: * Tyres 235/75 R 17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Drawbar, front wall, tailgate, folding supports, loading ramps galvanized * Axles, springs, air tanks, 40 mm flange towing eye painted in black * Board walls painted in RAL2011 deep orange * Side panels available in other RAL colors at extra cost ----Information: * New vehicle with manufacturer warranty * Errors and prior sale excepted ----Delivery Time: * Immediately available ex works Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.780 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2024, * KA-TA-R 11.9 Masterline: ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes Fsdopk D D Uspfx Al Hepg ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Eye: * Height-adjustable hot-dip galvanized drawbar, adjustable by 300 mm, with 40 mm flange eye ----General Attachments: * Jost mechanical landing gear (front) * Two rear mechanical hot-dip galvanized fold-down supports * Tool box made of galvanized steel sheet, mounted right side * Plastic quarter mudguards ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin electrical connector * Bolted underride guard with LED tail lights ----Tipping Platform: * Net hooks on the sides and rear in the central locking mounts as well as 3 external on the front wall * Hot-dip galvanized chassis * Steel pallet 3-way tipper body, fully galvanized * Continuous, drop-side walls with spring-assisted board wall lifters, can be folded down—no center stanchions * Tailgate foldable and pendulum-mounted via manual central locking * Hot-dip galvanized bolted rear stanchion ----Load Securing: * 1 recessed and foldable 5 t lashing ring in each corner, as well as 4 recessed and foldable 3 t lashing rings on each side in the outer frame * 4 mm steel sheet floor, rear mount rail for ramps ----Ramps: * 1 pair aluminum loading ramps approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading area at the rear, integrated into the chassis ----Tires: * 235/75 R 17.5 tires ----Paint Finish: * Axles, springs, air tanks, drawbar and landing gear painted in black * Vehicle is hot-dip galvanized ----Notes: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Available immediately from Egestorf on the A7

Stanje: novo, največja dovoljena obremenitev: 8.780 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2024, * KA-TA-R 11.9 Masterline: ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Eye: * Height-adjustable hot-dip galvanized drawbar, adjustable by 300 mm, with 40 mm flange eye ----General Attachments: * Jost mechanical landing gear (front) * Two rear mechanical hot-dip galvanized fold-down supports * Tool box made of galvanized steel sheet, mounted right side * Plastic quarter mudguards ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin electrical connector * Bolted underride guard with LED tail lights Fjdpfx Aepk D Dmol Hopg ----Tipping Platform: * Net hooks on the sides and rear in the central locking mounts as well as 3 external on the front wall * Hot-dip galvanized chassis * Steel pallet 3-way tipper body, fully galvanized * Continuous, drop-side walls with spring-assisted board wall lifters, can be folded down—no center stanchions * Tailgate foldable and pendulum-mounted via manual central locking * Hot-dip galvanized bolted rear stanchion ----Load Securing: * 1 recessed and foldable 5 t lashing ring in each corner, as well as 4 recessed and foldable 3 t lashing rings on each side in the outer frame * 4 mm steel sheet floor, rear mount rail for ramps ----Ramps: * 1 pair aluminum loading ramps approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading area at the rear, integrated into the chassis ----Tires: * 235/75 R 17.5 tires ----Paint Finish: * Axles, springs, air tanks, drawbar and landing gear painted in black * Vehicle is hot-dip galvanized ----Notes: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Available immediately from Egestorf on the A7

Stanje: rabljeno, največja dovoljena obremenitev: 6.800 kg, skupna masa: 8.900 kg, konfiguracija osi: 2 osi, prva registracija: 06/2012, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 2.050 mm, višina nakladalnega prostora: 700 mm, skupna širina: 2.550 mm, Skupna masa: 8.900 kg Prazna masa: 2.100 kg Nosilnost: 6.800 kg Skupna dolžina: 5.950 mm Nakladalna dolžina: dolžina kesona 4.000 mm Širina: širina kesona 2.050 mm / 2.550 mm Nakladalna višina: višina kesona cca 630 mm Dodatne informacije - Prednja teleskopska podporna noga - Vlečna gred nastavljiva po višini preko vretena - Varjena konstrukcija iz drobnozrnatega jekla - Parabolično vzmetenje Fjdpfxoycbkbj Al Hepg - Jekleno rebrasto dno - Velik paket pritrdišč - Rampe iz mrežaste rešetke

Stanje: novo, največja dovoljena obremenitev: 8.670 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2025, * KA-TA-R 11.9 Masterline: ----Braking system: * Wabco EBS * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem compensation unit ----Drawbar / Flange Towing Eye: * 300 mm height-adjustable hot-dip galvanized drawbar with 40 mm flange towing eye ----Electrics / Lighting: * RDÜ tire pressure monitoring system * LED lighting * 15-pin power connector ----General attachments: * Tool box made of galvanized sheet steel, mounted on the right side * Bolted underrun guard * Plastic quarter mudguards * Jost mechanical landing gear at the front * Two rear mechanical hot-dip galvanized folding supports ----Tipper body: * Net hooks on the sides and rear integrated into the central locking brackets as well as 3 pieces mounted externally on the front wall * Hot-dip galvanized chassis * Steel 3-way tipping body * Full-length drop sides without center post, folding down with drop side spring assist * Rear flap drop-down and swinging, lockable via manual central locking * Hot-dip galvanized bolted rear stanchion * 4 mm steel floor plate * Rear mounting rail for loading ramps ----Load securing: * 1 x 5 t recessed and foldable lashing ring in each corner * Additionally, 4 x 3 t recessed and foldable lashing rings in each side frame ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Lockable storage compartment integrated under the loading area at the rear of the chassis Fpodpfeq Hg Dxjx Al Hjg ----Tyres: * Tyres 235/75 R 17.5 ----Painting: * Axles, springs, air tanks, drawbar, and landing gear painted in a shade of black * Sideboard painted RAL 9010 pure white * Painting of side walls in any RAL color available at extra cost * Floor and front wall hot-dip galvanized ----Information: * Reinforced body with EN 12642 XL load securing certificate * New vehicle with manufacturer warranty * Errors and prior sale excepted ----Delivery time: * Available immediately ex works Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.600 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2025, * KA-TA-R 11.9 Masterline: ----Braking system: * Wabco EBS * Emergency release device for spring brake cylinders * Drum brakes Fpodpfxov Dz N Ae Al Hsg ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Towing Eye: * Height-adjustable hot-dip galvanized drawbar, adjustable by 300 mm, with 40 mm flange towing eye ----Electrical / Lighting: * RDÜ tire pressure monitoring system * LED lighting * 15-pin power connector ----General Attachments: * Toolbox made of galvanized sheet steel on the right side * Bolted underrun protection * Plastic quarter mudguards * Jost mechanical landing gear at the front * Two mechanical hot-dip galvanized folding supports at the rear ----Tipper body: * Mesh hooks on the sides and rear in the central locking mounts plus 3 pieces on the outside of the front panel * Hot-dip galvanized chassis * Steel pallet 3-way tipper body * Continuous, drop-down side walls without center stanchion, with drop-side spring lift assist * Rear drop gate can be swung down or used as a pendulum via manual central locking * Hot-dip galvanized, bolted rear stanchion * 4 mm steel floor plate * Rear mounting rail for loading ramps ----Load securing: * One flush-mounted, foldable 5 t lashing ring in each corner * Four flush-mounted, foldable 3 t lashing rings in the outer frame on each side ----Ramps: * 1 pair of aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t per pair), suitable for rubber-tired and tracked vehicles * Lockable rear storage compartment underneath the loading area, integrated into the chassis ----Tires: * Tires 235/75 R 17.5 ----Paintwork: * Axles, springs, air tanks, drawbar, and landing gear painted black * Drop side painted RAL 9010 pure white * Painting of the side walls in any RAL color possible for an extra charge * Floor and front wall hot-dip galvanized ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available from Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.870 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 11.9: ----Braking System: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with equalizer unit ----Drawbar / Drawbar Eye: * Drawbar height-adjustable by 300 mm * 40 mm flanged drawbar eye ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic quarter mudguards * Plastic toolbox mounted on the front right side of the bulkhead ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * LED lighting ----Loading Platform: * Loading platform length: 6.27 m * Suitable for container transport * 50 mm softwood floor * Provision in front of the bulkhead for retrofitting container locks * Bolted smooth sheet metal bulkhead * Trapezoidal-profiled steel drop sides with spring-assisted opening * Steel rear wall can be inserted between the ramp holders in front of the bulkhead when not in use * Bolted rear stakes ----Load Securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * 1 x 6.3 t lashing point in each of the front and rear corners * Various holes in the front and rear cross members for 1.2 t lashing options ----Ramps: * Single-piece mechanical loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (retractable to 20 mm) Fpedeq Ra D Eopfx Al Hjg * Rear approach angle approx. 860 mm ----Tyres: * Tyre size: 235/75R17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Hot-dip galvanized chassis, drawbar, bulkhead, rear wall, rear stakes and loading ramps * Sideboards painted RAL 9010 pure white * Painting of side walls in other RAL colours available at surcharge ----Notes: * Errors and prior sale reserved * New vehicle with manufacturer's warranty ----Delivery Time: ? Available from CW