Fliegl Polpriklopnik Z Odprto Ploščato Ploščadjo nakup rabljenega (28.676)

Stanje: novo, skupna masa: 43.500 kg, konfiguracija osi: 3 osi, Leto izdelave: 2025, Oprema: ABS, GVN 4GVN O4 EXTRA-WIDE PLATFORM KOC LIFT HYDRAULIC RAMP ----VEHICLE HISTORY * NEW VEHICLE 09/2025 * VIDEO AVAILABLE UPON REQUEST Dedpfsxpzr Djx Al Hscg VEHICLE FEATURES EQUIPMENT AND BODY * SPARE WHEEL * FRONT STORAGE COMPARTMENT * FRONT STORAGE COMPARTMENT BELOW GOOSENECK * STORAGE BOXES ON BOTH SIDES * FIRE EXTINGUISHER HOLDER * LOADING AREA ON GOOSENECK * EXTENDABLE PANEL FOR OVERSIZE LOADS * SIDE EXTENSIONS FOR OVERSIZE LOADS * WARNING SIGNS FOR OVERSIZE LOADS 4X * LASHING POINTS * ADDITIONAL SUPPORT LEGS * FIXED HYDRAULIC LOADING RAMPS * ELECTRICAL CONNECTION FOR RAMP HYDRAULICS * TRAILER LIGHT SYSTEMS * PRESSURE GAUGE ----CHASSIS AND AXLES * OSMAN KOC AXLES (IDENTICAL TO BPW AXLES) * 4 AXLES * 1 LIFT AXLE * LAST AXLE: LOCKABLE STEERING * FULL AIR SUSPENSION * DRUM BRAKES * WABCO BRAKE SYSTEM ----TYRES * ALL TYRES * 235/75 R17.5 ----DIMENSIONS * CARGO AREA DIMENSIONS * 9.55 M L x 2.55 M W / 3 M W IN OVERSIZE MODE * RAMP LENGTH * 3.23 M L x 0.75 M W * CARGO AREA ABOVE GOOSENECK * 1.8 M L x 2.4 M W * GOOSENECK HEIGHT FROM GROUND * 1.4 M H * LOAD FLOOR HEIGHT FROM GROUND * 0.9 M H * OVERALL LENGTH WITHOUT RAMPS * 13.6 M L ---- IMMEDIATELY READY FOR USE ---- * EXPORT SALES ONLY WITH DEPOSIT (DEPOSIT) MIN. 500¤ - 2000¤ * EXPORT SALES ONLY WITH DEPOSIT MIN. 500¤ - 2000¤ ----EXPORT/EXW CUSTOMS REGISTRATION IN 10 MIN. (AUTHORIZED EXPORTER) 5-DAY, 30-DAY LICENSE PLATE AND 17–21 DAY AUSTRIAN LICENSE PLATE EURO 1 VEHICLE RESERVATIONS ONLY VIA EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID! For sales to the EU and third countries, a deposit of at least ¤ 500.00 / ¤ 1,000.00 is required. (For sales to the EU and third countries a deposit/guarantee of at least ¤ 500.00 / ¤ 1,000.00 will be levied) Subject to alterations, errors and prior sale! For more vehicles, please visit our website: Sale is exclusively based on our General Terms and Conditions – see our website Important note: Despite careful inspection of all details in our offer, errors may occur, in part due to transmission errors in the systems of various platform providers. Therefore, all information is provided without guarantee and does not constitute a legal claim. Legal notice: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it serves as information for contract initiation. All information provided here is without guarantee and does not represent warranted characteristics.

Stanje: novo, skupna masa: 58.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, OTHER GÜVEN LOW-LOADER? 4 AXLES? HYDRAULIC RAMPS? STEERING AXLE? WIDE-LOAD PREPARATION?----VEHICLE HISTORY OTHER GÜVEN TRAILER? STEERING AXLE? PENDLE AXLE? MOVABLE RAMPS? OVERWIDTH? NEW? LIFT AXLE? MANUFACTURER * GVN-TRAILER - OUR OWN PRODUCTION FROM TURKEY AXLES * 4 AXLES * AXLE CONFIGURATION * TRI-AXLE * THIRD AXLE WITH STEERING AXLE * LIFT AXLE * OSMAN KOÇ AXLES * DRUM BRAKES * AIR SUSPENSION BODY * WITH GOOSENECK * EXTENDABLE LOW-LOADER - 6 M EXTENSION * ADJUSTABLE FIFTH WHEEL PIN, UP TO 22 TONS DIMENSIONS * FROM RAMPS TO KING PIN (CLOSED): 9.40 M * FROM RAMPS TO KING PIN: 12.10 M * FULLY EXTENDED TOTAL LENGTH: 15.40 M * EXTENSION: 6.00 M RAMPS * HYDRAULIC RAMPS * SWIVELING * HYDRAULICALLY ADJUSTABLE (LEFT AND RIGHT) EQUIPMENT * AIR SUSPENSION * LOAD SECURING LASHING EYES * WIDE-LOAD PREPARATION * TOOLBOX TYRES * TYRE SIZE: 235/75 R17.5 * TWIN TYRES Dcedpfx Aoymu Nxjl Hjg WEIGHTS * UNLADEN WEIGHT: 12,500 KG * GROSS VEHICLE WEIGHT (GVW): 68,000 KG * TECHNICAL PAYLOAD: 45,500 KG * TECHNICAL GVW: 58,000 KG * AXLE LOADS: 12,000 KG PER AXLE CONDITION * NEWLY MANUFACTURED DESCRIPTION GVN TRI-AXLE LOW-LOADER WITH LIFT AXLE AND STEERING AXLE (3RD AXLE), AIR SUSPENSION AND OSMAN KOÇ AXLES WITH DRUM BRAKES. EXTENDABLE SEMI-TRAILER WITH 6 M EXTENSION AND ADJUSTABLE KING PIN. HYDRAULIC, SWIVELING RAMPS AS WELL AS OVERWIDTH PRE-EQUIPMENT AND LOAD SECURING. IDEAL FOR CONSTRUCTION MACHINERY AND HEAVY HAULAGE TRANSPORTS. ---- * EXPORT SALE ONLY WITH DEPOSIT (MIN. €500 - €2,000) * EXPORT SALES ONLY WITH DEPOSIT MIN. €500 - €2,000 ----EXPORT DECLARATION CUSTOMS EXW IN 10 MIN. (AUTHORIZED EXPORTER) 5 DAYS, 30 DAYS PLATES, 17-21 DAYS AUSTRIAN PLATES EURO 1 VEHICLE RESERVATION REQUESTS ONLY VIA EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID! For sales to EU and non-EU countries, a deposit of at least €500.00 / €1,000.00 will be charged. (For sales to the EU and third countries, a deposit/guarantee of at least €500.00 / €1,000.00 will be levied.) Subject to change, errors and prior sale! More vehicles can be found on our homepage: Sales are only carried out according to our terms and conditions – see homepage. Important note – Important information: Despite carefully checking all details in our offer, errors may occur. Some of these are due to transmission errors within the systems of different platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal notice: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it serves as information for contract initiation. All information provided is without guarantee and does not represent warranted characteristics.

Stanje: novo, skupna masa: 58.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, OTHER GÜVEN LOWBED TRAILER? HYDRAULIC RAMPS? STEERING AXLE? OVERSIZE EQUIPMENT? ----VEHICLE HISTORY OTHER GÜVEN TRAILER? STEERING AXLE? PEN? MOVABLE RAMPS? OVERSIZE? NEW? LIFT AXLE? MANUFACTURER * GVN-TRAILER – OUR OWN PRODUCTION FROM TURKEY * AXLE CONFIGURATION * THREE-AXLE * THIRD AXLE WITH STEERING AXLE * WITH LIFT-AXLE * OSMAN KOÇ AXLES * DRUM BRAKES * AIR SUSPENSION BODY * WITH GOOSENECK * EXTENDABLE LOWBED TRAILER, 6 M EXTENSION * ADJUSTABLE KINGPIN, 22 TONS DIMENSIONS * FROM RAMPS TO KINGPIN (CLOSED): 9.40 M * FROM RAMPS TO KINGPIN: 12.10 M * EXTENDED OVERALL LENGTH: 15.40 M * EXTENSION: 6.00 M RAMPS * HYDRAULIC RAMPS * SWIVELING * HYDRAULICALLY MOVABLE RIGHT AND LEFT EQUIPMENT * AIR SUSPENSION * LOAD SECURING LOOPS * OVERSIZE PREPARATION * TOOLBOX TIRES Djdpoylfmfsfx Al Hocg * TIRE SIZE: 235/75 R17.5 * TWIN TIRES WEIGHTS * EMPTY WEIGHT: 12,500 KG * PERMISSIBLE TOTAL WEIGHT: 58,000 KG * TECHNICAL PAYLOAD: 45,500 KG * TECHNICALLY PERMISSIBLE OVERALL WEIGHT: 58,000 KG * AXLE LOADS: 12,000 KG PER AXLE CONDITION * NEWLY MANUFACTURED DESCRIPTION GVN THREE-AXLE LOWBED TRAILER WITH LIFT AXLE AND STEERING AXLE (3RD AXLE), AIR SUSPENSION, AND OSMAN KOÇ AXLES WITH DRUM BRAKES. EXTENDABLE SEMI-TRAILER WITH 6 M EXTENSION AND ADJUSTABLE KINGPIN. HYDRAULIC, SWIVELABLE RAMPS, AS WELL AS OVERSIZE PREPARATION AND LOAD SECURING. IDEAL FOR CONSTRUCTION MACHINERY AND HEAVY-DUTY TRANSPORTS. ----* EXPORT SALES ONLY WITH DEPOSIT MIN. €500 - €2,000 ----EXPORT CUSTOMS CLEARANCE EXW IN 10 MIN. (AUTHORIZED EXPORTER) 5 DAYS, 30 DAYS REGISTRATION PLATES, AND 17-21 DAYS AUSTRIAN PLATES EURO 1 VEHICLE RESERVATION ONLY VIA EMAIL FUNCTION. VERBAL RESERVATIONS ARE NOT VALID! For sales to the EU & third countries, a deposit of at least €500 / €1,000 will be charged. (For sales to the EU and third countries will be levied deposit/guarantee of at least €500.00 / €1,000.00) Subject to change, error, and prior sale! More vehicles can be found on our website. Sales are made exclusively according to our General Terms and Conditions – see website. IMPORTANT NOTICE: Despite careful inspection of all details in our offer, errors may occur. Some are caused by transmission errors in the systems of the various platform providers. We therefore point out that all information is without guarantee and does not constitute a legal claim. Legal notice: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it is information for contract initiation. The information provided here is without guarantee and therefore does not constitute warranted characteristics.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, lastna masa: 12.900 kg, skupna masa: 49.000 kg, konfiguracija osi: 2 osi, prva registracija: 03/2022, Leto izdelave: 2022, Faymonville 2-axle lowbed semi-trailer MEGAMAX 2x12 t PA 2 steered axles Single-extendable, 2 x 12 t pendle axles Overall length: approx. 13,500 mm Overall width: approx. 2,550 mm Neck width: approx. 2,480 mm Load bed width: approx. 2,550 mm Chassis width: approx. 2,550 mm Technically extendable: approx. 4,700 mm Coupling height (loaded): approx. 1,205 mm Loading height (max. loaded): approx. 1,005 mm Load area length: approx. 6,850 mm Chassis length: approx. 2,600 mm King pin distance to front: approx. 1,200 mm Swing radius of tractor unit (rear): approx. 2,300 mm Swing radius (front): approx. 1,800 mm Axle spacings: approx. 1,360 mm Gooseneck: - Gooseneck in SNT design for optimized load floor length, length approx. 3,750 mm - Gooseneck hydraulically liftable/lowerable and detachable - Technical fifth-wheel load: 25,000 kg Boiler deck: - Deep-designed extendable boiler deck "SUPER LOW" design - Length approx. 6,850 mm, with mechanical locking system Rear chassis: - Rear chassis with closed outer frame, chequer plate and continuous prism digger recess, approx. 1,250/700 x 505 mm, open at the rear - PENDLE-AXLE, all axles hydro-mechanically forced-steered - Burst hose valve on axle compensation cylinder with automated RESET function - Hydraulic cylinders with shut-off cocks and front pins to secure lifted position - Technical axle load: 12,000 kg each - Hydraulic axle levelling Brake system: Dcedpfx Aloy Hxd Ie Heg - WABCO brake system, EBS-E according to regulations Chassis tyres: - 245/70 R 17.5 3PMS Metalizing: - Complete HRM metallization (High Resistance Metallisation) - Entire steel structure shot-blasted, then hot-finished with ZINACOR 850 (Zinc 85%, Alu 15%) Painting: - 6-coat final treatment - Entire steel structure shot-blasted after welding. One layer of zinc-based primer, one adhesion primer. Final coat with 2 layers of 2K lacquer (acrylic) in a single colour, followed by cavity sealing with special wax - Trailer colour: RAL 3002 Carmine Red - Rim colour: Silver Grey - Side board colour: Natural Aluminum Steel structure: - Steel structure made of high-strength fine-grained steels. - Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690Q/S700MC (yield strength 690MPa) - MAG welding process according to EN ISO 4063

Stanje: rabljeno, lastna masa: 12.400 kg, največja dovoljena obremenitev: 39.500 kg, prva registracija: 10/2006, naslednji pregled (TÜV): 10/2025, skupna dolžina: 13.500 mm, skupna širina: 25.500 mm, skupna višina: 10.000 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17.5/7mm, medosna razdalja: 1.300 mm, velikost sprednje pnevmatike: 245/70 R 17.5/7mm, obratovalna teža: 51.900 kg,

Stanje: rabljeno, lastna masa: 13.000 kg, največja dovoljena obremenitev: 35.000 kg, prva registracija: 07/2009, naslednji pregled (TÜV): 01/2025, skupna dolžina: 13.000 mm, skupna širina: 25.500 mm, skupna višina: 20.000 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17.5/7mm, medosna razdalja: 1.300 mm, velikost sprednje pnevmatike: 245/70 R 17.5/7mm, obratovalna teža: 48.000 kg,

Stanje: rabljeno, največja dovoljena obremenitev: 26.500 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/1994, dolžina tovornega prostora: 13.030 mm, širina tovornega prostora: 2.600 mm, skupna širina: 2.600 mm, skupna višina: 4.000 mm, Ladebett: 8620 mm, Schräge hinten: 450 mm, Breite: 2600 mm, Breite: 3111 mm mit Verbreiterung, ausziehbare und/oder klappbare Verbreiterungen, Schwanenhals: 3960 mm, Ladehöhe Bett: ca. 880 mm, hydraulisch seitlich verschiebbare Auffahrrampen (LxB) 2900 x 830 mm, elektrische Hydraulikpumpe, Kabelfernbedienung, 2 x Schwerlast-Zurringe je Seite, 5 x Rungenstecktaschen je Seite, ausziehbare Warntafeln, Zentralschmieranlage, Stützwinden, drei Achsen hydraulisch zwangsgelenkt, Trommelbremsanlage, Luftfederung, Rundumkennleuchte, Rückfahrscheinwerfer, Fahrzeug kann mit Werbung beklebt und/oder beschriftet sein. SI85616 Dcjdpfjw Sb Sqsx Al Hog Unser Angebot ist generell ohne neue TÜV-Abnahme. Falls neue TÜV-Abnahme erwünscht, unterbreiten wir Ihnen gerne ein Angebot unserer Partnerwerkstätten! Fahrzeug kann mit Werbung beklebt und/oder beschriftet sein. Es gelten unsere allgemeinen Liefer- und Zahlungsbedingungen. Gerne erstellen wir Ihnen für dieses Objekt ein Finanzierungs- oder Leasingangebot. Bitte sprechen Sie uns an!

Stanje: rabljeno, največja dovoljena obremenitev: 85.000 kg, skupna masa: 105.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/1999, dolžina tovornega prostora: 18.000 mm, širina tovornega prostora: 3.500 mm, skupna širina: 3.500 mm, Cargo Master CM 90, namenjen za notranjo uporabo, primer: industrija, pristanišča, strme ladijske rampe, neodvisno vzmetenje koles, hidravlično dvigovanje, izjemen kot krmiljenja, velika okretnost, znižana nakladalna višina približno 670 mm, dvignjena nakladalna višina približno 1150 mm, nosilnost: približno 85.000 kg, vozilo je lahko polepljeno z oglaševanjem in/ali označeno. Dodpfexvwb Ujx Al Hocg SI86388 Naša ponudba je praviloma brez novega tehničnega pregleda (TÜV). Če želite nov tehnični pregled, vam z veseljem pripravimo ponudbo naših partnerskih delavnic! Vozilo je lahko polepljeno z oglaševanjem in/ali označeno. Veljajo naši splošni pogoji dobave in plačila. Za ta objekt vam z veseljem pripravimo ponudbo financiranja ali leasinga. Prosimo, kontaktirajte nas!

Stanje: rabljeno, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2011, Oprema: ABS, Vehicle Identification No.: W09TS300990M49248 TELESCOPIC EXTENSION up to 4,300 mm SLIDING TABLE Dcodpfxoyx N Eye Al Hsg WHEEL RECESSES Unladen weight: 9,000 kg German MOT (HU) due Neck length: 3,650 mm – Saddle height: 1,250 mm Low bed: Length: 9,430 mm (of which 1,830 mm are tapered) – Width: 2,540 mm – Loading height: 890 mm Hook-in rails Support stands Widening lighting Fifth wheel load at front: max. 19,000 kg Axle loads (technical) 3 x 10,000 kg BPW Eco Plus axles with drum brakes Axle 1 = LIFTABLE 2 x toolboxes Tyres: 235/75 R 17.5 Spare wheel holder WITH spare wheel Modifications, prior sale, and errors excepted. The description is intended for general vehicle identification only and does not represent a guarantee as per sales law. The terms outlined in the purchase contract are decisive. Our offer is in general without new TÜV inspection. If a new TÜV inspection is required, we would be happy to provide a quote from one of our partner workshops! The vehicle may have advertising stickers and/or lettering applied. Our general terms of delivery and payment apply.

Stanje: rabljeno, skupna masa: 70.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/1998, Oprema: ABS, Vehicle identification number: XL952N5SAWL007036 Dcedpfoyx N Dvsx Al Hjg Fifth wheel load: 20,000 kg - Axle loads: 5 x 10,000 kg Unladen weight: 13,100 kg Roadworthiness test (HU) due Neck length: 4,100 mm Coupling height: 1,250 mm Low-bed: Length: 9,200 mm (650 mm thereof chamfered) -- Width: 2,525 mm -- Loading height: 880 mm Extendable by 6,200 mm Widenable to 3,000 mm Detachable rails Axle load (technical): 5 x 10,000 kg SAF axles with drum brakes Axles 1, 2: liftable Axles 5, 6: friction-steered Tyres: 235/75 R 17.5 ===== Subject to changes, prior sale and errors. The description is for general identification of the vehicle and does not constitute a warranty in the legal sense. The purchase contract description is binding. Our offer is generally without new roadworthiness inspection (TÜV approval). If a new TÜV approval is required, we will gladly provide you with an offer from our partner workshops! Vehicle may be stickered and/or lettered with advertisements. Our general terms and conditions of delivery and payment apply.

Stanje: rabljeno, največja dovoljena obremenitev: 39.450 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2021, naslednji pregled (TÜV): 06/2026, Leto izdelave: 2021, Oprema: ABS, * Ceylan Treyler nizkopodna prikolica * Prva registracija: 07-2021 * TÜV do: 07-2026 * Dvigljiva os * Hidravlične rampe * Lastna teža: 8.550 kg * Nosilnost: 39.450 kg * Dovoljena skupna masa: 48.000 kg * Več slik in videoposnetkov preko Whatsapp * Podatki brez garancije, vmesna prodaja pridržana. Dedoyt Ut Djpfx Al Hjcg

Stanje: rabljeno, največja dovoljena obremenitev: 36.540 kg, skupna masa: 48.500 kg, konfiguracija osi: 3 osi, prva registracija: 06/2020, naslednji pregled (TÜV): 05/2028, Leto izdelave: 2020, Oprema: ABS, Interna št. vozila: G400133 Na poti na našo dvorišče v Kaufungen - Kassel, Nemčija, takoj na voljo Več informacij pri Luis Luceni Nizkopodni polpriklopnik LANGENDORF SATÜ 30 – 10,0 m z poglobitvami za kolesa Letnik 2020 Radijsko daljinsko upravljanje 3 osi – 2 vodeni – 1 dvižna Dolžina: 13.900 mm Nakladalna površina: 10.000 mm Tehnično dovoljeno skupno maso: 48.500 kg Lastna masa: 11.960 kg Pridržujemo si pravico do napak. Vaše rabljeno vozilo z veseljem vzamemo v račun. Dcsdpfx Aley A Uxae Hjg Možnost financiranja neposredno pri nas v podjetju. GOLEC NUTZFAHRZEUGE GMBH Govorimo: nemško, angleško, špansko, poljsko, ukrajinsko, rusko, bolgarsko.

Stanje: rabljeno, največja dovoljena obremenitev: 26.240 kg, skupna masa: 36.000 kg, konfiguracija osi: 2 osi, prva registracija: 10/2008, dolžina tovornega prostora: 10.819 mm, Oprema: ABS, Proizvajalec: B-XL Model: 4,5 m, 2-osna razširitev Leto: 2008 Stanje: dobro Serijska številka: WKVDAS00200021091 Referenčna številka: 7721 Datum registracije: 27.10.2008 Bobnasta zavora: ? Dodpfx Aovl Dkrol Hscg ABS: ? Zadnje preme: SAF Vzmetenje: zračno Velikost pnevmatik: 245/70R17,5 Preostala profilna pokritost: 40–40 % Skupna masa: 36.000 kg Lastna masa: 9.760 kg Krmiljena zadnja os: ?

Stanje: rabljeno, lastna masa: 8.980 kg, največja dovoljena obremenitev: 24.020 kg, skupna masa: 33.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2005, naslednji pregled (TÜV): 07/2025, skupna dolžina: 2.600 mm, skupna širina: 4.000 mm, skupna višina: 13.970 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5, Oprema: ABS, | Menci freezer trailer | Meat refrigeration unit | Overhead rail system | BPW axles, first axle lift | Permissible axle load: 24,020 kg | Lift axle, BPW | Carrier 1800 refrigeration unit | Diesel operating hours: 5,730 h | Jost landing gear with lateral compensation Dodpfx Ajymn S Tjl Hjcg

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, lastna masa: 10.600 kg, največja dovoljena obremenitev: 25.400 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2017, naslednji pregled (TÜV): 11/2026, vzmetenje: zrak, velikost pnevmatike: 25/65 R 17,5, barva: siv, Oprema: ABS, dvižna zadnja plošča, Številka objekta # 30881 Dcsdpjyz Tbwefx Al Hjg Dhollandia rampa 9 t. vodena povlečna os A3 električni vitel aluminijaste nakladalne rampe za visoko posteljo zadaj razširljiv za 30 cm na vsaki strani SAF osi bobnaste zavore dvižna os gume 205/65 R 17,5 Nadgradnja d.: 9.470 x 2.420 x 3.120 mm in 4.150 x 2.420 x 2.870 mm drseča ponjava drseča streha perforiran zunanji okvir 15 parov pritrdilnih točk 5 t 3 pari pritrdilnih točk 10 t ABS/EBS dvig/spuščanje električni nosilec rezervnega kolesa delovni žarometi 2x orodjarna stranska zaščita proti podletu SAF podvozje za polpriklopnik hidravlična zadnja podpora NATO priključek

Stanje: rabljeno, največja dovoljena obremenitev: 38.000 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2012, with air suspension, hydromechanical forced steering, single-extendable loading platform, STZ-L gooseneck - robust steel welded construction - formed loading platform 3,500 x 2,480 mm - hydromechanical forced steering (dual-circuit steering) in low-profile design (installation height 235mm) with adjustable guide elements - turntable-mounted fifth wheel plate with interchangeable 2” kingpin and adjustable steering wedge Loading platform - Single-extendable, designed as external-internal tube construction with fixed 1,000 mm front platform section - Extension stages locked via spring-actuated cylinders and conical pins Chassis - 3-axle air suspension chassis - BPW (Eco) axle assembly comprising three hydromechanically forced-steered steering-axle units - Axles with adjustable tapered roller bearings and automatic slack adjusters (AGS) - Standard lift and lower valve for a minimum platform height of 825 mm or maximum of 1,025 mm - Loading height 1: 885 mm - Loading height 2: 925 mm Rear of vehicle - Straight design - Short rear overhang of 1,000mm from the center of the last axle - Rear mechanical support Brake system - Dual-line full air brake system with diaphragm brake cylinders - Automatic load-dependent brake (ALB) - Automatic slack adjusters (AGS) - Parking brake via spring-loaded cylinders - ABS brake Special equipment - Central lubrication system "BekaMax" - Electric power unit - Radio remote control Technical data Gooseneck Platform (LxW): 3,500 x 2,480 mm Build height above fifth wheel: 235 mm Coupling height loaded: 1,300 mm Loading Platform Dcodpfxjyxcpfs Al Hog Platform (LxW): 10,000 x 2,550 mm Extendable by 7,500 mm In increments up to (LxW): 17,500 x 2,550 mm Loaded platform height: 925 mm (+/- 100 mm) 2nd driving position: 885 mm (+140/-60 mm) Steering 1st to 3rd axle hydromechanically forced-steered (dual-circuit steering)

Stanje: rabljeno, največja dovoljena obremenitev: 36.910 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, prva registracija: 06/2020, Dimension B 11,450 mm Unladen weight 13,450 kg with air suspension, hydromechanical forced steering, single-extendable loading platform, STZ-L Gooseneck - robust steel welded construction - formed loading platform 4,000 mm x 2,480 mm - rear articulation radius 2,400 mm - fifth-wheel load 18,000 kg - chamfered - hydromechanical forced steering (dual-circuit steering) in low-profile design (construction height 235 mm) with adjustable guide elements - slewing ring-mounted fifth-wheel plate with replaceable 2" king pin and adjustable steering wedge - mechanical landing legs Loading platform - single telescopic, designed as an external-internal tube construction with 700 mm long fixed front deck section - locking of extension stages by spring-loaded cylinders - 300 mm long sliding table Chassis - air-suspended 4-axle chassis, - BPW axle assembly (Eco), consisting of one rigid axle and three hydromechanically forced-steered axles - axles with adjustable tapered roller bearings and automatic slack adjusters (AGS) - lifting and lowering valve as standard - 1 axle liftable Rear of vehicle - straight construction Dcedpfx Aloyxcnzo Hsg - short 1,100 mm rear overhang from centre of last axle - drop pipe support at rear Brake system - 2-line full air brake system with diaphragm brake cylinders - automatic load-dependent braking (ALB) - automatic slack adjusters (AGS) - parking brake via spring-loaded cylinders - ABV brake Special equipment - extendable width extensions - "BekaMax" central lubrication system - all available lashing rings installed - lift option (load-dependent) for 1st axle - radio remote control - stanchion rails Technical data Gooseneck Loading platform (LxW): 4,000 x 2,480 mm incl. Wirtgen slope Construction height over fifth wheel: 235 mm Fifth wheel height loaded: 1,275 mm Loading platform Platform (LxW): 8,500 mm x 2,550 mm Telescopic by 5,800 mm up to 14,300 mm Platform height loaded: 755 mm (+140/-60 mm) 2nd drive position: 805 mm (+/-100 mm) Steering 1st axle liftable 2nd to 4th axle hydromechanically forced-steered (dual-circuit steering)

Stanje: novo, največja dovoljena obremenitev: 86.300 kg, skupna masa: 110.000 kg, konfiguracija osi: 3 osi, with BPW axles 12 t, hydraulic suspension, hydromechanical forced steering, single-extendable loading platform type, with 2-piece access ramps Unladen weight: 23,700 kg Payload: 86,300 kg Length: 15,620 – 24,920 mm STZ-L Gooseneck - Front corners chamfered at 45° (468 x 468 mm), closed outer frame - Robust steel and welded construction - Designed loading platform 3,700 x 2,480 mm - Hydromechanical forced steering (dual circuit steering) in flat-bed design (overall height 235 mm) with adjustable guide elements - Ball bearing turntable mounting plate with interchangeable 3.5" king pin and adjustable steering wedge - Fifth wheel load: 26,000 kg - Maximum steering radius: 2,800 mm - Comfort storage box Dsdpeyxcn Iefx Al Hocg Loading Platform - Design: "single telescopic platform" - Traffidecko polymer rubber covering - Loading area single-extendable, executed as an outer-inner tube construction - Locking of extension stages via spring-loaded cylinders and locking pins - Fixed front bearing 700 mm length - Intermediate table 300 mm Chassis - 7-axle chassis with hydraulic suspension, axle spacing 1,510 mm - BPW axle assembly, consisting of one non-steered axle and six hydromechanically forced steered axle units with a maximum steering angle of 45° - Axles with adjustable tapered roller bearings and automatic slack adjusters (AGS) - Ride height: 890 mm +170 mm/-90 mm - Chassis with open outer frame Vehicle Rear End - Design: "chamfered 500 mm" - 2 integrated drop leg supports for stabilizing the vehicle rear during loading operations 2-piece access ramps with Super Grip surface, 50,000 kg - 2,600 + 1,200 x 720 mm - Hydraulic lifting unit with hand pump, cable actuation - Hydraulic ramp adjustment Brake System - Dual line full air braking system with diaphragm brake cylinders - Automatic load-dependent brake (ALB) - Automatic slack adjusters (AGS) - Parking brake via spring-loaded cylinders - ABV brake system - Hydraulic connection - easyControl - Aluminum sideboards, three-sided - Lift function for 2 axles - Central lubrication system "BEKA-MAX" - Electric power unit - Extending width adjusters incl. infill boards, width extendable telescopically to 3,390 mm Technical Data Gooseneck Loading platform (L x W): 3,700 x 2,480 mm Chamfer: 1,080 mm Build height above fifth-wheel: 235 mm Fifth-wheel height (laden): 1,300 mm Steering clearance rear: 2,800 mm Steering clearance front: 1,300 mm King pin: 3.5" Loading Platform Loading platform (L x W): 12,500 x 2,750 mm Telescopically extendable by 9,300 mm Incrementally up to (L x W): 21,800 x 2,750 mm Width extendable up to 3,390 mm Rear chamfer included: 500 mm Loading height (laden): approx. 890 mm Chassis Axle spacing: 6 x 1,510 mm Rear overhang: 1,100 mm Steering 1st axle non-steered 2nd – 7th axles hydromechanically forced steered (dual-circuit steering)

Stanje: novo, največja dovoljena obremenitev: 29.260 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.200 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, skupna višina: 3.570 mm, Leto izdelave: 2026, Oprema: ABS, Technical Data: Model and Manufacturer - Model: Kässbohrer K.SLA R 3 / 1N - 18 / 30 - Manufacturer: Kässbohrer - Type: Extendable low-bed semi-trailer with excavator recesses, suitable for transporting vehicles and heavy machinery. Dimensions - Overall length: 13,190 mm - Gooseneck length: 3,950 mm - Platform length: 9,240 mm - Extension: 3,500 mm (pe) - Total width: 2,550 mm (expandable by 600 mm with side extensions) - Fifth wheel height: 1,250 mm - Platform height: 875 mm - Ramp length: 2,750 mm - Ramp width: 850 mm - Wheelbase: 7,800 mm - Axle distance: 2,260 mm Weights and Load Capacities - Permissible gross weight: - 52,800 kg at 60 km/h - 48,000 kg at 80 km/h - Tare weight: 12,744 kg ±3% - Axle load capacity: 30,000 kg (10 tonnes per axle) - King pin load capacity: 18,000 kg Axle Equipment - Number of axles: 3 (2 rigid at front, 1 trailing axle at the rear) - Lift axle: Manually raiseable depending on load (1st axle) - Axle material: BPW axles with drum brakes Tyres and Rims - Tyre size: 245/70 R17.5 - Tyre brand: GOODYEAR - Tyre markings: M+S label and 3PMSF marking - Tyre pressure monitoring system: Increases fuel efficiency and tyre life - Number of rims: 12 units (steel rims with offset ET120) Chassis and Suspension - Suspension: Air suspension with load gauge - Braking system: Dual-circuit air brake by WABCO, EBS 4S/3M with ABS and RSS (roll stability support) Lighting and Electrics - Lighting system: 24V, multi-chamber lights from ASPÖCK, LED side marker and rear lights - Coupling type: Standard yellow/red for air supply connection - Electrical connectors: NATO socket with 2 x 50mm² interconnection cables (3 m long) Ramps - Type: Foldable hydraulic loading ramps with sliding mechanism - Capacity: 40 tonnes - Ramp surface: Hardwood - Safety: Ramp protection tension chain included Load Securing - Lashing rings: - 2 x 2 lashing rings, each 5,000 daN capacity - 1 x 2 lashing rings, 10,000 daN capacity on gooseneck - 4 x 2 lashing rings, 6,000 daN capacity in the low bed area - Container lock housing: Suitable for transportation of 1 x 20 FT or 1 x 30 FT containers - Stake pockets: 5 x 2 stakes (50 mm x 100 mm) Dcedpfx Aju Tarpjl Heg Special Features - Gooseneck: With 90° vertical corners, stable and durable - Floor: 45 mm thick hardwood floor and steel floor with chequer plate structure - Excavator recess bridge: Bridge consists of hardwood planks with steel supports to cover wheel recesses - Toolbox: PVC-coated steel, dimensions 750 x 400 x 360 mm Paintwork - Chassis: Traffic red (RAL 3020) - Partial metallization of the loading areas Condition: New and ready for immediate use. - Perfectly suited for heavy hauling and use in construction or machinery relocation.

Stanje: rabljeno, največja dovoljena obremenitev: 38.048 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2020, dolžina tovornega prostora: 13.190 mm, širina tovornega prostora: 3.150 mm, višina nakladalnega prostora: 890 mm, skupna širina: 2.550 mm, skupna višina: 3.550 mm, Leto izdelave: 2020, Oprema: ABS, Kaessbohrer LB3E polpriklopnik nizke izvedbe s hidravličnimi rampami Prva registracija BPW Eco Plus osi Dvižna os Bobnaste zavore z ABS in EBS Zračno vzmetenje Pnevmatike: 245/70 R17,5 40/45% Skupna masa: 48.000 kg, Lastna masa: 9.952 kg, Nosilnost: 38.048 kg. Dolžina labodjega vratu: 3,95 m Dsdoy Eupwepfx Al Hscg Dolžina nizke ploščadi: 9,24 m Širina: 2,55 m + 2x30 cm Višina nakladalne površine: 89 cm Hidravlične rampe s stranskim pomikom Zadnje podporne noge Privezni obroči Žepi za kole Pridržujemo si pravico do napak/opisnih napak in vmesne prodaje.

Stanje: novo, največja dovoljena obremenitev: 37.560 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Moving-off aid for shunting, connected to the first axle via EBS (no installation required on the truck side) * Last axle as self-steering trailing axle with electro-pneumatic lock * Trailing axle lock for shunting purposes, activated from the cab via EBS (no installation required on the truck side) ----Suspension: * Air suspension with lifting and lowering system, including RtR valve ----Electrics / Lighting: * Smart-Board infotool mounted on trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * 2 additional LED reversing lights * 7-pin socket at rear for overlength lighting * Side marker lights with indicator circuit * Tire pressure monitoring with display in the truck via EBS signal (no installation required on the truck side) ----General Attachments: * Side underrun protection * Landing gear at front, swing supports at rear of the chassis * Straight steel fenders * Spare wheel carrier in front of front wall crossmember (spare wheel not included) * Mechanically adjustable warning sign packages at front and rear * Swing arm as carrier for connection lines from truck to trailer ----Low Loader Deck: * 2nd kingpin position * Saddled platform with 45° chamfered front corners and front toolbox made from galvanized, powder-coated steel sheet (W = 2,480 x H = 500 x L = 665 mm) with folding lid * 400 mm high drop-down/removable aluminium sideboards (custom RAL color) on saddle platform * Removable 150 mm high rear wall * Rear inclined ramp of approx. 700 mm at the end of saddle platform to low-bed deck, fitted with checker plate and lashing bar for attaching aluminium approach ramps * Saddle platform with 50 mm tongued-and-grooved timber floor, low-bed platform with 60 mm tongued-and-grooved timber planks * Tread plate above axles * 9 x mechanical folding extensions to 3 m overall width, but not on rear ramp (extension planks included with lockable transverse storage compartment under load area) * Preparation for 3 ramp storage compartments under saddle platform for either aluminium ramps or timber planks for wheel trough covers * Preparation for container locks on the gooseneck Dcjdoykx Nqspfx Al Heg ----Load Securing (LaSi Package): Saddle Platform: * Perforated external frame, angled at 45°, with hole pattern for lashing equipment (2 t lashing capacity per point, minimum spacing 480 mm) * 3 x 13.4 t recessed tie-down rings per side (1 on saddle platform, 1 on main longitudinal beams after the step, 1 above the center axle beside the beam) Low-bed Deck: * 3 x 13.4 t tie-down rings per side on outer frame (1 at the start of the gooseneck, 1 at the start of the rear ramp, 1 at the end of the ramp) * 2 x 10 t tie-down rings per side (1 between front wheel-well and 1st axle, 1 between 2nd and 3rd axle) * 3 x 5 t tie-down rings per side, bolted to the outer frame of wheel wells (2 at front, 1 at rear wheel well) ----Digger Arm Rest: * Extended digger arm rest from end of last fixed axle over steering axle to end crossmember, continuous with internal reinforcement profile, approx. W = 770 mm x D at rear

Stanje: novo, največja dovoljena obremenitev: 38.000 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.000 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.540 mm, skupna višina: 3.780 mm, Leto izdelave: 2026, Oprema: ABS, * Humbaur HTS 30 K * Heavy-duty semi-trailer * Low loader * NEW * Immediately available * Fully galvanized * Robust construction * Overall dimensions: 12,630 mm x 2,540 mm x 3,780 mm * Internal dimensions: 12,000 mm x 2,540 mm * Loading height: 890 mm * Fifth wheel height: 1,230 mm * Fifth wheel platform: 3,500 mm * Low bed: 8,680 mm * Gross weight: 48,000 kg * Payload: 38,000 kg * Tires: 235/75R17.5 * SAF low loader axles with lift and trailing steering axle * Air suspension with raising and lowering function * Twin tires * EBS braking system * 24-volt lighting system * LED side marker lights * Wabco Smart Board * 2-inch kingpin * Chassis frame hot-dip galvanized by immersion * Heavy-duty, welded chassis frame * Climbing strips on ramp incline * 50 mm softwood floor * Recess for excavator stick storage Deder Ic Rwopfx Al Hscg * 3 m equipment package * Steel toolbox under loading platform * Gooseneck with 400 mm front wall * 400 mm high aluminum side boards, foldable * Front storage box with lid * 3 pairs of lashing rings 6 t * 3 pairs of lashing rings 3 t * 5 pairs of lashing rings 10 t * 6 pairs of lashing rings 3 t * 6 pairs of lashing rings 2 t * Ramps with rubber covering * Spare wheel with holder on front wall * LED reversing lights * Visual paint finish on request * Additional equipment options available by arrangement ATTENTION!!!!! PLEASE READ CAREFULLY!!!!! We expressly reserve the right to prior sale, as this item is also offered on other platforms. We strongly recommend inspection and examination so that no misunderstandings arise regarding condition and suitability. Inspections and examinations are possible and expressly welcome by appointment at any time!!! The specified internal dimensions are approximate values. For new vehicles, additional costs for freight and documents may apply. TRADE-INS POSSIBLE FOR ALMOST ANYTHING!!! PART EXCHANGE AND EXTRA PAYMENT POSSIBLE!!! Display area: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday to Friday 8:00 am to 5:00 pm, Saturday 8:00 am to 2:00 pm Over 500 new and used trailers in stock at all times!!! Tel.: Fax:

Stanje: novo, lastna masa: 13.850 kg, največja dovoljena obremenitev: 31.150 kg, skupna masa: 45.000 kg, konfiguracija osi: 2 osi, dovoljena osna obremenitev (os 1): 12.000 kg, dovoljena osna obremenitev (os 2): 12.000 kg, dolžina tovornega prostora: 6.800 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 300 mm, velikost pnevmatike: 245/70 R 17,5, barva: črn, Oprema: ABS, Gooseneck: - Hydraulically detachable gooseneck with external main frame featuring integrated steering pick-up and individually operated push-off cylinders - Integrated hydraulic cylinders and support arms for coupling and uncoupling the lowbed deck - Piping connections to the lowbed, mounted on the inside of the main frame at the gooseneck kink - Bracket for locking pins Lowbed, extendable: - Frame pre-tensioning adapted for the maximum payload, reduced payload in the telescoped positions - Prepared for the installation of load area wideners - Telescoping stages approx. every 500 mm + container positions - 7 pairs of swivelling lashing rings, 13,400 daN lashing capacity - 5 pairs of stake pockets 100x50 mm in the outer frame - 3 pairs of M36 threaded bushings on the outside of the telescopic frame for screwing in lashing brackets - 1 pair of M36 threaded bushings on the inside of the telescopic frame for screwing in lashing brackets - Prepared for the installation of container locks - Adapter without pin-tab coupling: 2 pairs of 13,400 daN lashing rings welded on the adapter facing the lowbed; 1 pair on the outer adapter; 1 pair on the inner adapter - 45 mm spruce plank flooring between the flatbed frame sections Chassis, drive-over type: - Steel welded construction in compact design with open excavator trough at the rear - Kink to lowbed at 90°, with 2 pairs of holes at the front and rear of the chassis platform for hanging loading ramps using locking pins - Different track widths can be set using 2 different holes - Welded smooth steel floor above the axles with anti-slip coating, max. 5,000 kg axle load - End beam with cutouts for lights, designed as underrun protection according to ECE R58-003 - Valves and electrical distribution protected, installed in the double floor Axles, suspension, and tires: - DOLL tera pendle axle technology with hydraulically suspended GIGANT pendle axles - All axles rated at 12 t, with ABS and AGS (automatic slack adjuster) - All axles hydraulically steered, with max. 60° steering angle on the rearmost axle - Use of low-maintenance bearing points in the steering area - All lubrication points connected to the central lubrication system - Lift axle / jack function, a locking pin is supplied for each axle to allow axle lifting - DOLL tera pendle axle with hydraulic suspension and damping elements - Lifting and lowering device with 600 mm total stroke (-70/+530) - Hydraulic dual-circuit displacement steering system - Steering pick-up at the king pin plate, mounted on a turntable - Transmission of steering angles via a tie rod to the front master cylinders - Rear slave cylinders transfer the front steering angles via solid steering rods to the steering axles - All valves are centrally mounted on a control block Dedpfxey Dqkhe Al Hocg - Axle load indicator via manometer on the side - Steering pressure monitoring - Tire pressure monitoring system - Tires: 245/70 R 17.5 Accessories included: - Steel front wall with spare wheel holder, bolted, 520 mm high, hot-dip galvanized - Side and rear panels, insertable, approx. 400 mm high, anodized - Two central lubrication systems BEKAMAX - DOLL Tronic - CAN-Bus system - Support arms for coupling and uncoupling the lowbed deck - Fifth wheel plate with integrated steering pick-up, steering wedge, and 2'' king pin to accommodate the trailer - Gooseneck cylinders for coupling and uncoupling the lowbed deck - 6-way hydraulic coupling with pressure relief valve for easy disconnection of hydraul

Stanje: novo, največja dovoljena obremenitev: 87.500 kg, skupna masa: 120.000 kg, konfiguracija osi: 3 osi, Type STZ-VP 8 (245) (3+5) with pendulum axles The technical data provided are only valid when used with a 4-axle tractor unit with the following specifications: Dimension a: 5,400 mm Fifth wheel height (laden): 1,300 mm Weights - Speed: 80 km/h Fifth wheel load: 22,000 kg - 30,000 kg Axle load: 8 x 12,000 kg Gross vehicle weight: 120,000 kg Dcodpfx Aowc Inhel Hsg Curb weight: approx. 32,500 kg Payload: approx. 87,500 kg (depending on the load chart / easyLOAD calculation) Dimensions - Dimension b: 21,990 mm – 26,490 mm total train length Vehicle width: 2,750 – 3,000 mm Gooseneck length x width: 3,700 mm x 2,480 mm Fifth wheel height (laden): 1,300 mm Steering radius front / rear: 1,370 mm / 2,835 mm King pin: 3.5'' Front 3-axle bogie Wheelbase: 2 x 1,510 mm Single tires Continental, 245/70 R 17.5 143/141 L (146/146 F) M+S Steering axle configuration: counter-steered Excavator trough: single-extendable Length x width: 7,000 mm x 3,000 mm Extendable by/up to max. 4,500 mm / 11,500 mm Construction height: 450 mm Load height when loaded: approx. 600 mm with 150 mm ground clearance Stick width: 1,350 mm Mattresses and outriggers removable Rear 5-axle bogie Wheelbase: 4 x 1,510 mm Single tires Continental, 245/70 R 17.5 143/141 L (146/146 F) M+S Steering axle configuration: forced steering Radio remote control

Stanje: novo, največja dovoljena obremenitev: 31.400 kg, skupna masa: 45.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.700 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 300 mm, Leto izdelave: 2026, Oprema: ABS, DOLL NEXT DOLL Tiefbett tera T2P-S3FS21 – 2-achsiger Tieflader aus der kurzfristig verfügbaren rapid-Serie der DOLL Fahrzeugbau GmbH aus Oppenau – aus dem Herzen des Schwarzwaldes. Ideal für den anspruchsvollen Einsatz im harten Off-Road-Bereich, schwierigem Gelände sowie im täglichen Baustellenbetrieb. Je nach Verfügbarkeit sehr schnelle Lieferung und sofort einsatzbereit dank der DOLL-rapid-Serienfertigung. Individuell konfigurierbar nach Ihren Wünschen und Anforderungen. Technische Daten * Zulässiges Gesamtgewicht: 45.000 kg Dcsdpfxeyytm Re Al Hsg * Eigengewicht: ca. 13.600 kg – Nutzlast: ca. 31.400 kg * Fahrwerk: 2x 12-t-Pendelachsen * Tiefbett teleskopierbar * Fahrzeugbreite: 2.550 mm * Ladehöhe (beladen): 300 mm * Radstand: 1.360 mm Ausstattungsmerkmale * Abfahrbarer Schwanenhals für deutlich erleichtertes und schnelleres Be- sowie Entladen * Leichtgängige Teleskopierung für effizientes Handling * Hochwertige Spritzverzinkung – optimaler Korrosionsschutz und reduzierte Standzeiten * Pulverbeschichtete und feuerverzinkte Anbauteile – robust, langlebig und rostfrei Ihre Vorteile auf einen Blick * Schnelle Verfügbarkeit * Robust & zuverlässig – bewährte Technik, auch unter schwierigen Bedingungen ideal * Made in Germany – gefertigt bei DOLL Fahrzeugbau, Oppenau – über 145 Jahre Erfahrung im hochwertigen Fahrzeugbau Smarte Technologien Unser innovativer Ansatz vereint höchste Qualität, Leistung und Wirtschaftlichkeit. Die stetig steigende Nachfrage nach unseren Tiefbett-Sattelaufliegern treibt die konsequente Weiterentwicklung modernster Technologien in der Serienfertigung voran. Kontakt & Standort Hergestellt von DOLL Fahrzeugbau GmbH, Industriestraße 13, 77728 Oppenau (Hauptsitz und Produktionsstandort) * Die Fahrzeuge können je nach Kundenstandort direkt im Werk oder bei ausgewählten Referenzkunden deutschlandweit zusammen mit einem Außendienstmitarbeiter präsentiert werden.