Fliegl Sds 470 T Mit Radmulden nakup rabljenega (59.560)

Stanje: novo, številka stroja/vozila: db8c7ca763dc8d3b3d034dfa4, lastna masa: 3 kg, največja dovoljena obremenitev: 34 kg, skupna masa: 38 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 385/55 r22.5, Further information Chassis Semi-Trailer Container Fine-grained steel welded construction, fifth wheel plate with replaceable 2-inch kingpin Container mounts: 1 x 40-foot container with gooseneck tunnel Front extension fully extended: 1 x 45-foot container with long gooseneck tunnel and rear overhang Transport of filled tank containers is excluded. No rear height adjustment and no folding intermediate supports, transport of containers without tunnel is not possible. Cgsdpfx Alsi Riwmj Hjt 2 container guides, incl. connector plate for electrics, air, and brake connections (connections mounted upwards) Front extension is roller-mounted, manually extendable (for 45-foot containers with long tunnel) 24 t, 2-speed landing gear, single-side operation, straight lower section, without compensation Wheel chocks with holders Aluminum side underrun protection Galvanized steel rear underrun protection Extendable rear underrun protection for 45-foot containers Half-shell mudguards With anti-spray flaps, EG compliant Rear impact protection Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axles/chassis laser-aligned to reduce tire wear and fuel consumption Staggered axle spacing mm (intermodal transport) up to 44t gross train weight Air suspension Brake system 2-line compressed air system, color-coded lines for easy servicing Spring-loaded parking brake 2 foolproof coupling heads at the front, without interlinking cable EBS, electronic braking system with EBS socket at the front, no connection cable Test port for brake cylinder pressure externally accessible on the EBS module Note: The trailer may only be towed by tractors that ensure the effectiveness of the ABS! With raise & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, for display on truck cab monitor, truck must be pre-equipped, not installed for trucks (not a certified scale) Wheels and Tires 385/55 R22.5, brand at manufacturer’s discretion Steel rims, factory silver Electrics 24 volts, multi-chamber lights, LED tail and brake lights, lateral yellow LED lighting (Note: certain tractors may report false errors, though function is intact) 2 white front position lights 2 white/red rear marker lights 2 x 7-pin foolproof sockets at the front, no interlinking cable Operating notes Attention: Transport of filled tank containers is excluded! When transporting 45-foot containers with short tunnel, with or without front extension, the permissible system length from kingpin to rear edge and total train length of 16,500 mm is exceeded! The underrun guard must be manually extended! An exemption permit according to § 70 StVZo is required! Country of Registration/Plates Germany Test approval according to EC 2007/46 24/7 service hotline Prepared for single-line license plate holder Warning sign according to ECE-70 Conspicuity marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paint Frame: DB 7350 Nova Grey 10-year anti-corrosion warranty Landing legs: black coated No pallet box paint Note: Archive images!

Stanje: novo, številka stroja/vozila: e4d182b7a074e7b83e540ed58, lastna masa: 5 kg, največja dovoljena obremenitev: 32 kg, skupna masa: 38 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 385/55 r22.5, Further information Chassis Semi-Trailer for Containers Fine-grained steel welded construction, kingpin plate with replaceable 2-inch kingpin and 2 kingpin positions Container positions: Rear extension retracted: 1 x 20 ft flush with rear, low fifth-wheel load Rear extension extended 1st stage: 1 x 30 ft, 2 x 20 ft, 1 x 40 ft with gooseneck tunnel Rear extension extended 2nd stage: 1 x 45 ft with short gooseneck tunnel and overhang to the rear Rear extension extended 2nd stage + front extension 1st stage: 1 x 45 ft with long gooseneck tunnel and chamfered corners With rear height adjustment and folding center supports for containers without a tunnel Front container guides, plug-in and removable (electrics, air and brake connections located at the front cross member) Plug-in adapter for front locking, for securing containers without tunnel from below, with holder for storage when not in use Front extension mounted on rollers, manually extendable (for 45 ft containers with long tunnel) Rear extension mounted on rollers, with hand crank 24 t, 2-speed landing gear, single-side operation, straight lower part, without compensation 2 wheel chocks with holder Side underrun protection made of aluminum Rear underrun protection, galvanized steel Extendable underrun protection for 45ft containers Cgjdpfx Aloi Rizuo Hjt Half-shell mudguards with anti-spray mudflaps as per EC standards Rear bumper protection Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser alignment to reduce tire wear and fuel consumption Axle spacing offset mm (combined transport) up to 44 t gross combination weight Air suspension 1st axle is a liftable axle with automatic lift, including forced lowering and traction assistance, activated by braking three times (traction aid functional up to 30% axle overload and up to a maximum speed of 25 km/h) Braking System 2-line compressed air brake system, color-coded lines for easy servicing. Spring-loaded parking brake 2 non-interchangeable coupling heads in front, no connecting line EBS, Electronic Braking System with EBS socket at front, no connecting cable Attention: This trailer may only be towed by tractor units that ensure the effectiveness of ABS! With lift & lower valve + auto-reset function Vehicle stability control system Axle load detection via EBS-CAN bus signal, for display in the truck cab (truck must be accordingly prepared, no truck-side installation/no calibrated scale) Wheels and Tires 385/55 R22.5, brand at the manufacturer's discretion Steel rims, factory silver Electrics 24 volt, multi-chamber lamps, yellow LED side marker lights 2 white marker lights at front 2 white/red lane marker lights at rear 2 x 7-pin non-interchangeable sockets at front, no connecting cable Operating Instructions The specified gross weight is technically possible, but depending on the cargo, the gross weight may not be achievable while adhering to permitted axle, support, and fifth-wheel loads. Special permit required if total towing length exceeds 16,500 mm. When transporting 45ft containers with short tunnel, with or without front extension, the permitted system length from kingpin to rear end and the total towing length of 16,500 mm is exceeded! Rear underrun protection must be extended manually! An exemption according to § 70 StVZo is required! Registration / Plates Germany Approval according to EC 2007/46 24/7 Service Hotline Prepared for single-line license plate holder Warning sign according to ECE-70 Contour marking

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902029406, lastna masa: 5.800 kg, največja dovoljena obremenitev: 29.200 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2021, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.790 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5", barva: srebrn, Leto izdelave: 2021, The images are archive photos; the vehicle may still be in use! Cgjdpfx Alewhp A De Hjt Chassis: Semi-Trailer Forwarding Body Fine-grain steel welded construction in lightweight design, fifth wheel plate with replaceable 2" kingpin, coil well approx. 8,040 mm long, 6 coil supports (coil pockets internal dimensions 82 x 52 mm), coil well cover with screen-printed boards and steel crossbeams, 2 split strip covers for the coil well, each approx. 293 mm wide, unladen weight approx. 13 kg per cover, outer frame slightly sloped with "Load-Lock profile" for lashing strap attachment. Note: To attach lashing straps in combination with drop sides, the sides must be opened! 9 pairs of lashing rings, each rated to 5 t, embedded within the coil well area, 24 t two-speed landing gear, single-sided operation, with straight lower part, without cross-brace, note: clear landing gear foot dimension / free rear swivel radius approx. 1930 mm to the rear without supports, pull-out ladder at the rear, door retainers at sides, 2 wheel chocks with holders, aluminium side underrun guard, cross and longitudinal mounting brackets for support of aluminium slats, aluminium rear underrun protection, half-shell mudguards with anti-spray flaps (EC compliant), rear impact protection, 1 plastic toolbox, 2 pairs of stake pockets recessed into the outer frame (approx. 72 x 42 mm internal dimension) at positions 1 and 2 according to Fliegl stake data sheet old version, as with AU 19219, 2 stake pockets centrally recessed into the floor, approx. 72 x 42 mm internal dimension at positions 1 and 2 according to Fliegl stake data sheet old version, as with AU 192198. Note: Stake pockets/insertable stakes are not designed for exclusive load securing of long materials, pipes, etc., without lashing. Axles + Suspension: SAF disc brake axles with 430 mm disc diameter, "axles/chassis laser-aligned" to reduce tire wear and fuel consumption, axle spacing offset 1410/1310 mm (suitable for combined transport) up to 44 t total train weight, air suspension, No lift axle The images are archive photos; the vehicle may still be in use!

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33901014232, lastna masa: 5.900 kg, največja dovoljena obremenitev: 29.100 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2025, naslednji pregled (TÜV): 07/2026, dolžina tovornega prostora: 13.800 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 2.638 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5, barva: drugo, Leto izdelave: 2025, Chassis Semi Logistics Fine-grained steel welded construction, fifth wheel plate with replaceable 2" king pin. Driveable and load-bearing for construction/agricultural machinery up to max. 24,000 kg GVW and up to a maximum machine width of 2,480 mm (the track width of the construction machinery or vehicles to be transported must not exceed 2,200 mm). Rear hook bar for aluminium ramps (wider construction/agricultural machinery is not permitted for loading). Outer frame slightly inclined, new version with "Load-Lock profile" for attaching lashing straps. 14 pairs of recessed lashing rings in the outer frame, each 2.5 t 6 pairs of recessed lashing rings in the outer frame, each 5 t 24 t, two-speed landing gear, single-sided operation, with straight baseplate, without load compensation Free landing leg dimension or free swing radius at rear approx. 1,920 mm Foldable rear support 2x wheel chocks with holder Side impact guard in aluminium Underrun protection in steel Cjdpfx Aexb D Swel Hjgt Quarter-shell mudguards in front of and behind each axle With anti-spray mudflaps behind each axle 1x spare wheel holder for 1 electronic spare wheel, with wheel fixing kit 1x spare wheel, same make as standard tyres, steel rim Axles & Suspension SAF drum brake axles "Axle/chassis laser alignment" – reduces tyre wear and fuel consumption Air suspension 1st axle automatic lift axle, additionally electrically controllable from the truck, including forced lowering and traction aid, without truck installation (traction aid functional up to axle load exceedance of 30% and up to a speed of max. 25 km/h) Brake System 2-line compressed air brake system Colour-coded piping for easy servicing Spring-loaded parking brake 2 coded coupling heads at the front, without connection line 24 Volt EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be towed by towing vehicles that ensure the functionality of the ABS! With raise & lower valve Vehicle stability control system "TPMS" tyre pressure monitoring system according to ECE R 141, display via the towing vehicle’s monitor, via EBS, without truck installation. (This requires preinstallation in the truck. Only available for standard tyres) Wheels and Tyres 12x 235/75 R17.5 Dual wheels 12x steel rims, factory silver Electrics 24 volt, multi-chamber lights, side-mounted yellow LED lighting Side yellow LED lighting with indicator coupling “flashing side marker lights” 2 white LED position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin coded sockets at the front, without connection cable Floor Anti-slip phenolic plywood panels approx. 30 mm thick, for high point loads, suitable for forklift axle load up to max. 5,600 kg Front wall / front corner posts 25 mm aluminium hollow profile, 1,350 mm high, steel corner posts in heavy-duty design Front wall additionally lined on the inside with 1,250 mm high phenolic plywood panel

Stanje: novo, številka stroja/vozila: 1e7fb50bfb3671204fb4d0b92, lastna masa: 4 kg, največja dovoljena obremenitev: 33 kg, skupna masa: 38 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 385/55 r22.5, Further Information Chassis Semi-Trailer for Containers Fine-grain steel welded construction, fifth wheel plate with replaceable king pin and two king pin positions Container Mountings: Cgjdpfxji Riv Nj Al Hjt - 1 x 20-foot centered, without steel or checker plate covering in the rear area - 2 x 20-foot or 1 x 40-foot with gooseneck tunnel No rear height adjustment and no folding center supports, transport of containers without tunnel not possible. 24-ton, 2-speed landing gear, single-sided operation, with straight bottom part, without compensating rod 2 wheel chocks with holders Aluminum side underrun protection Zinc-plated steel rear underrun protection Half-shell mudguards With EC-compliant anti-spray mud flaps Rear impact protection Axles & Suspension SAF disc brake axles with 430 mm disc diameter Laser-measured axles/chassis to reduce tire wear and fuel consumption Offset axle spacing mm (combined transport) up to 44 tons gross train weight Air suspension Brake System 2-line compressed air braking system Color-coded line routing for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS electronic braking system with EBS socket at the front, no connecting cable Note: The trailer may only be towed by tractors that ensure effective ABS operation! With lift & lower valve Vehicle driving stability system Axle load detection via EBS CAN-bus signal, for display on the truck cabin display (truck must be appropriately equipped, no installation/truck not included, not a calibrated scale) Wheels and Tires 385/55 R22.5 tires, manufacturer at seller’s discretion Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, tail and brake lights in LED, lateral yellow LED lighting (Note: On certain tractors, false diagnostics may occur although functionality is ensured) 2 white position lights at the front 2 white/red line marker lights at the rear 2 x 7-pin non-interchangeable sockets at the front, without connecting cable 2 additional LED work lights at the rear, switched via reversing light Operational Notes Attention: Transport of filled tank containers is excluded! Country of Registration/Signs Germany With Dekra inspection and report (according to §13 EC-FGV) Prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on sides and red at rear Paintwork Frame DB 7350 Nova Grey 10-year rust-through warranty Note: Archive images!

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902029968, lastna masa: 6.100 kg, največja dovoljena obremenitev: 28.900 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2022, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.000 mm, vzmetenje: zrak, velikost pnevmatike: 435/50 R19,5", The images are for reference only; the vehicle may still be in use. Codpfx Alowk Dckj Hegt Equipment details available upon request!

Stanje: rabljeno, največja dovoljena obremenitev: 15.620 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 03/2017, skupna širina: 2.550 mm, skupna višina: 1.150 mm, Leto izdelave: 2017, Oprema: ABS, Fliegl FLT 216 2-Axle Dolly First registration: 31-03-2017 Csdpfx Aswbxtxjl Hjgt 2x BPW axles Air suspension Tyres: 385/55 R22.5 Approx. 30% Drum brakes with ABS and EBS Gross weight: 18,000 kg, Unladen weight: 2,380 kg, Payload: 13,620 kg Telescopic drawbar Minimum distance between fifth wheel and towing eye 420 cm, extendable by 80 cm up to 500 cm Fifth wheel height: approx. 115 cm Towing eye height: approx. 45-50 cm Hot-dip galvanized chassis Approved for NL Dolly Errors / typos and prior sale reserved.

Stanje: rabljeno, največja dovoljena obremenitev: 15.620 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 03/2017, skupna širina: 2.550 mm, skupna višina: 1.150 mm, Leto izdelave: 2017, Oprema: ABS, Fliegl FLT 216 2-Axle Dolly First registration: 31-03-2017 2x BPW axles Air suspension Tyres: 385/55 R22.5 Approx. 30% Drum brakes with ABS and EBS Gross weight: 18,000 kg, Unladen weight: 2,380 kg, Payload: 13,620 kg Csdpjvv Anqjfx Al Hjgt Telescopic drawbar Minimum distance between fifth wheel and towing eye 420 cm, extendable by 80 cm up to 500 cm Fifth wheel height: approx. 115 cm Towing eye height: approx. 45-50 cm Hot-dip galvanized chassis Approved for NL Dolly Errors / typos and prior sale reserved.

Stanje: novo, največja dovoljena obremenitev: 25.050 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 950 mm, skupna širina: 2.550 mm, Total weight: 35,000 kg / 48,000 kg Unladen weight: 9,950 kg Payload: 25,050 kg / 38,050 kg Overall length: 21,000 mm Loading length: Platform internal length approx. 13,500 mm / max. loading length 21,000 mm Width: 2,550 mm Loading height: 950 mm Additional Information: New vehicle from ongoing production, available from approx. calendar week 8/2026 Rear telescopic support 4 wheel chocks with holders 4 pairs of flush-mounted container locks in the floor for 1 x 40 ft. container or 2 x 20 ft. containers 1 spare wheel carrier for 1 spare wheel, including wheel fixing kit, basket type design 11 pairs of stake pockets set into the outer frame, suitable for FR insertable stakes 80x50 mm, flush-mounted in the outer frame, with opening for lashing strap or chain attachment 20 insertable stakes, W=80 / D=50 / L=1500 mm 1 plastic toolbox Cedoumha Nopfx Al Hogt 3 pairs of lashing eyes, each with 3.5 t capacity, embedded in the side frame – in the neck section 13 pairs of folding lashing rings, each 10,000 daN, freely pivoting in the side frame profile (also suitable for oversize load securing) 1 pair of folding lashing rings, each 10,000 daN, installed laterally in the intermediate support Air suspension with raising and lowering 1st axle automatic lift axle, additionally with forced lowering including start assist with control button on semi-trailer, no cab operation with raising & lowering valve + auto-reset function Wheels and tyres 235 / 75 R 17.5" Steel rims in twin arrangement, factory silver 24 Volt, multi-chamber lights, yellow LED side marker lights 2 white front position lights in LED 2 white/red rear contour lights in LED 2 x 7-pin and 1 x 15-pin interchangeable sockets at the front, without connecting cable 2 additional LED work lights at the rear, activated by reverse light 1 removable rotating beacon on the underrun guard 1 x 7-pin socket at rear 6 side sockets, 2x front bulkhead, 2x support legs, 2x rear end (left + right) 7-pin 2 work lights, recessed in the upper front wall incl. switch 2 pairs of overwidth boards, each with 2 LED marker lights per board, laterally extendable to 3,500 mm, additionally pluggable onto loading area (infinitely adjustable width) Fixed steel front wall 1,200 mm high, with robust steel corner posts without corner chamfer, side straight loading 2 lashing holes top inside and outside in the upper front wall corners Chassis front hot-dip galvanized + outer frame visible area Final painted in RAL 3002 Carmine Red Chassis rear hot-dip galvanized + outer frame visible area Final painted in RAL 3002 Carmine Red Front wall RAL 3002 Carmine Red

Stanje: novo, največja dovoljena obremenitev: 8.840 kg, skupna masa: 11.800 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.200 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, New Fliegl tandem low-loader with ramps, model TPS 118 Chassis fully hot-dip galvanized – sidewalls aluminum Vehicle from current production – delivery time approx. two weeks Gross weight: 11,800 kg Empty weight: 2,960 kg Payload: 8,840 kg Total length: 8,000 mm Loading length: 6,200 mm incl. rear slope Width: 2,550 mm Loading height: 900 mm Further information plus pre-carriage / handling from storage location 26639 Wiesmoor €1,280.00 net Loading width: 2,480 mm Chassis: Central axle trailer Fine-grain steel welded construction Slightly sloping outer frame, new design with "Load-Lock profile" for lashing strap attachment 3 pairs of lashing rings on the exterior floor, each 5t 1x front corners, 1x in front and 1x in the rear slope at the back Pair of lashing rings on the exterior floor / outer frame, each 5t Support leg at front Foldable rear support 2 wheel chocks with holder Side impact protection aluminum Underrun protection galvanized steel Spray flaps at the rear across the full width (not in conjunction with forklift holder) Quarter-shell fenders 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Drawbar arrangement for central axle trailer Drawbar with certified 40 mm towing eye Height-adjustable drawbar via spindle, max adjustment 300 mm Axles + Suspension GFA axles with tapered roller bearings and S-cam brakes "Axle/chassis laser alignment" reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load balancing (rocker equalizer) Brake system 2-line compressed air brake system Color-coded line layout for easier servicing Hand spindle parking brake 2 key-proof coupling heads at front, with connection lines to towing vehicle 24 volt ABS and ALB, ABS socket at front, with connecting cable Note: The trailer may only be towed by vehicles that ensure proper ABS functionality! Wheels and Tires 4 x 235/75 R17.5, brand at manufacturer’s discretion 4 steel rims, factory silver Electrics 24 volt, multi-chamber taillights, side yellow LED lighting 2 white position lights at front LED 2 white/red lane marker lights at rear 2 x 7-pin key-proof plugs at front, with connecting cable Floor Steel / checker plate floor for high point load capacity Note: Light floor warping due to welding distortion possible! Platform length: approx. 6,200 mm Rear slope approx. 900 mm Front wall / front corner stanchions 25 mm aluminum hollow profile, 400 mm high Cgsdpov E Dqlefx Al Hst Sidewalls 25 mm aluminum hollow profile, 400 mm high, foldable and removable Central stanchions 1 pair of folding stanchions in sidewall height, foldable and removable Rear wall / rear corner stanchions 1 pair of steel stanchions bolted to frame with holder for ramp locking, entry width approx. 2,430 mm Loading ramps 2 steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable with handgrip on ramps wood-covered (ramp tip with steel/checker plate) gas strut for single-operator handling Paintwork Frame hot-dip galvanized with passivation "15-year warranty against rust-through" Front wall RAL 9006 white aluminum Sidewall RAL 9006 white aluminum Loading ramps hot-dip galvanized Hire purchase offer: 48-month term, down payment only VAT, residual value 40%, monthly installment EUR 350.00

Stanje: rabljeno, lastna masa: 11.130 kg, največja dovoljena obremenitev: 36.870 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2019, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5 140J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5 140J, velikost zadnje pnevmatike: 235/75 R 17,5 140J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, 4 kolesne vdolbine s pokrovi, pritrdilne zanke, elektro-hidravlična črpalka za rampe in podporo, -- pridržujemo si pravico do tiskarskih napak, sprememb in nepravilnosti, vzorčne slike --, Več podatkov na: !, Več podrobnosti: ! Codpfx Ajy Igvhel Hsgt

Stanje: rabljeno, prevoženi kilometri: 358.000 km, moč: 375 kW (509,86 KM), prva registracija: 06/2020, vrsta goriva: dizel, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, zavore: retarder, barva: zelen, vrsta prenosa: samodejen, emisijski razred: Euro 6, prostornina tovornega prostora: 24 m³, dolžina tovornega prostora: 6.000 mm, širina tovornega prostora: 2.300 mm, višina nakladalnega prostora: 1.600 mm, Leto izdelave: 2020, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, Mercedes-Benz Arocs 4451 Fliegl Asphalt Tipper Push-off Cover Sheet Lift/Steer Axle Euro 6 Int. Ref. No. for inquiries: 0426380 * Condition: very good * Power: 375 kW / 510 HP * Unladen weight: 17,500 kg * Permissible total weight: 40.00 t * Suspension: leaf/air * ABS * ASR (traction control) * ESP (electronic stability program) * Rear axle differential lock * PTO (power take-off) * Push-off system * Emission standard: EURO 6 * External transparent sun visor * Air-suspended comfort driver's seat * Driver's seat heating Cjdpfx Asy Eug Nel Hogt * Air conditioning * 24/12V socket * Electric windows driver/passenger * Electrically heated and adjustable mirrors * CD radio / USB / AUX / Bluetooth * Mechanical roof hatch * Multifunction steering wheel * On-board computer * Fog lights * Fuel tank: 290 l aluminum, left * Light and rain sensor * Lift axle * Steer axle Body: Asphalt tipper with moving floor * Thermo body * Manufacturer: Fliegl * Electric sliding cover * Radio remote control Tyres: 1st axle: 385 / 65 R22.5 30% leaf-suspended 2nd axle: 385 / 65 R22.5 20% leaf-suspended steer axle 3rd axle: 315 / 80 R22.5 25% air-suspended 4th axle: 315 / 80 R22.5 25% air-suspended 5th axle: 385 / 65 R22.5 20% air-suspended lift axle steer axle ----Price: 64,900,- Euro + 19% VAT For further inquiries, you can reach us at the following numbers: We speak: German, English, French, Polish and ????? Subject to errors, alterations, and prior sale.

Stanje: novo, število postelj: 4, barva: bela, skupna dolžina: 6.830 mm, skupna širina: 2.320 mm, skupna višina: 2.570 mm, konfiguracija osi: 1 os, skupna masa: 1.500 kg, Funkcionalnost: popolnoma funkcionalen, Oprema: enoposteljne postelje, kopalnica, parkirni grelec, The CaraCito is consistently different. This begins with its fully electric equipment and ends with its unbeatable price-to-performance ratio. However, compromising on quality is not its way. Instead, it boasts a clean, youthful interior design that truly stands out. CaraCito highlights: No gas (with us available as a gas package), unique design. Consistently different, consistently modern, and consistently electric. The CaraCito stands out in many ways and impresses with the proven design and quality standards of WEINSBERG. In addition to standard features, this vehicle includes the following extensive optional equipment: • Service hatch, front right • Service hatch, front left • Service hatch, rear right • Midi-Heki skylight, rear • Insect screen door • GRP (fiberglass) roof (standard: aluminum for Cito) • Opening window in bathroom including combination blackout/insect roller (60 × 52 cm) • Opening window, front (100 × 62.4 cm) • Clear roof vent, center • Opening window, front right (90 × 52 cm) • Opening window, rear left (70 × 51 cm) • Opening window, rear (90 × 52 cm) • Spare wheel holder in gas locker • Load increase to 1,500 kg • Jockey wheel with integrated nose weight scale • Wheel trims • Break-System (self-adjusting brake) • ESP-ETS-Plus • LED downlights above dinette • Folding worktop extension • Electric floor heating • Roll-out bed function • Upholstery: Sweet Chestnut CaraCito Package includes: • Combination blinds on the windows, including blackout and insect protection • Heavy-duty corner steadies • Stabilizer safety coupling • Hydraulic wheel shock absorbers • Awning light with rain gutter in LED technology • 45-liter fresh water tank, fixed installation Gas Package includes: • Gas locker with large external hatch • TRUMA S gas heater including recirculation system • Refrigerator • 2-burner gas stove Shower Upgrade Package includes: • TRUMA water boiler with connections for kitchen and bathroom (230V operation) • 25-liter rollable waste water tank • Shower upgrade for washroom: hand shower with holder and shower curtain • Shower tray Socket Plus Package includes: • Additional 230V SCHUKO socket in the dinette • Additional 230V SCHUKO socket in the sleeping area • Additional 230V SCHUKO socket (kitchen, 1 unit) • USB socket (1 unit) in the dinette • USB socket (1 unit) in the sleeping area Of course, we also offer you tailor-made financing options—with or without a down payment. Small monthly installments, thanks to terms of up to 180 months. Regular sale price with above equipment: €29,767 Special price without trade-in Permanent exhibition of Knaus / Weinsberg / Tabbert vehicles. Our own specialist workshop with in-house inspections and gas system testing. We look forward to your visit! Errors, typos, and prior sale excepted. This listing does not constitute a legally binding promise. Individual inspection of the vehicle remains essential and is part of this offer. Cgodpeybvz Sefx Al Hst

Stanje: rabljeno, prevoženi kilometri: 416.483 km, moč: 330 kW (448,67 KM), prva registracija: 11/2011, vrsta goriva: dizel, lastna masa: 22.310 kg, največja dovoljena obremenitev: 9.690 kg, skupna masa: 32.000 kg, konfiguracija osi: 8x4, medosna razdalja: 5.020 mm, barva: bela, voznikova kabina: drugo, vrsta prenosa: samodejen, vzmetenje: jeklo, število sedežev: 2, Oprema: ABS, hidravlika, klimatska naprava, nizka raven hrupa, spojka prikolice, tempomat, zapora diferenciala, CERTIFIED PRE-OWNED Standard, lastna masa: 22310 kg, dovoljeno skupno maso: 32000 kg, sedeži iz blaga, listnato vzmetenje, digitalni tahograf, vlečna kljuka: Rockinger, pomožni pogon: dvojni z dvema neodvisno preklopnima izhodoma – črpalka zgoraj/prirobnica spodaj, nizka raven hrupa: 80 dB(A), voznikov komfortni sedež: ledvena opora, voznikov sedež zračno vzmeten, naslon za roko voznik, gretje sedeža voznika, radio/CD s daljinskim upravljanjem, priprava za telefon, parkirni pomočnik, multifunkcijski volan, ledvena opora voznik, ABS proti blokadi koles: za uporabo na terenu, električni pomik stekel, elektr. in ogrevana zunanja ogledala, zadnja diferencialna zapora, senčnik, rezervno kolo, priključni vtikač 1x15 polni, ročna dvižna streha, omejevalnik hitrosti: 90 km/h, sistem proti škropljenju, priklopna različica, gretje rezervoarja za AdBlue, pridržujemo si pravico do napak in sprememb. Prodaja le poslovnim strankam. Cgjdpfx Aloyvv Nme Hjt

Stanje: rabljeno, največja dovoljena obremenitev: 36.540 kg, skupna masa: 48.500 kg, konfiguracija osi: 3 osi, prva registracija: 06/2020, naslednji pregled (TÜV): 05/2028, Leto izdelave: 2020, Oprema: ABS, Interna št. vozila: G400133 Na poti na našo dvorišče v Kaufungen - Kassel, Nemčija, takoj na voljo Več informacij pri Luis Luceni Nizkopodni polpriklopnik LANGENDORF SATÜ 30 – 10,0 m z poglobitvami za kolesa Letnik 2020 Radijsko daljinsko upravljanje 3 osi – 2 vodeni – 1 dvižna Dolžina: 13.900 mm Nakladalna površina: 10.000 mm Tehnično dovoljeno skupno maso: 48.500 kg Lastna masa: 11.960 kg Pridržujemo si pravico do napak. Vaše rabljeno vozilo z veseljem vzamemo v račun. Cgsdpfx Aley A Uxae Het Možnost financiranja neposredno pri nas v podjetju. GOLEC NUTZFAHRZEUGE GMBH Govorimo: nemško, angleško, špansko, poljsko, ukrajinsko, rusko, bolgarsko.

Stanje: novo, največja dovoljena obremenitev: 37.560 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 ton BPW axles * Start assist for shunting purposes on the first axle, activated via EBS (without truck-side installation) * Last axle is a trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle for maneuvering purposes from the driver’s cab via EBS (without truck-side installation) ----Suspension: * Air suspension with lift and lowering function as well as RtR valve ----Electrics / Lighting: Cgedpfxjykx Nkj Al Hst * Smart-Board infotool mounted on trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * 2 additional LED reversing lights * 7-pin socket at rear for overlength lighting * Side marker lamps with indicator function * Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation) ----General Attachments: * Side underrun protection * Support legs at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall crossmember (without spare wheel) * Mechanically adjustable warning sign packages front and rear * Swing arm as a carrier for connecting lines from truck to semi-trailer ----Low Loader Platform: * 2nd king pin position * Gooseneck platform with 45° chamfered front corners and front-mounted toolbox made of galvanized, powder-coated sheet steel B = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm aluminum side boards (in desired RAL color) foldable and removable along the gooseneck platform * Rear wall, insertable, height 150 mm * Rear incline on the gooseneck platform to the low-bed approx. 700 mm long with checker plate covering and at the end a perforated strip for attaching aluminum approach ramps * Gooseneck platform with 50 mm clamped wooden planks, low-bed platform with 60 mm clamped wooden planks * Tread plate over axles * 9 mechanical extension panels to a total width of 3 m, not included in the rear incline (extension planks available with closed transverse stowage compartment under load floor) * Preparation for 3 storage recesses under the gooseneck platform for optional storage of aluminum approach ramps or planks for covering wheel recesses * Preparation for container locks on the swan neck ----Load Securing (LaSi Package): Gooseneck platform: * Perforated outer frame, 45° angled, with hole pattern for lashing devices (2 t lashing capacity per point with a minimum spacing of 480 mm) * 3 x 13.4 t lashing rings recessed into the floor per side (1 x on gooseneck platform, 1 x on longitudinal frame after the cranking, 1 x above middle axle next to longitudinal frame) Low-bed platform: * 3 x 13.4 t lashing rings per side at the outer frame (1 x start of gooseneck cranking, 1 x start of approach ramp, 1 x end of approach ramp) * 2 x 10 t lashing rings per side (1 x between front wheel recess and 1st axle, 1 x between 2nd and 3rd axle) * 3 x 5 t lashing rings per side screwed to outer frames of the wheel recesses (2 at front wheel recess, 1 at rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest from end of last rigid axle over the steering axle to the end cross member, continuous with internal reinforcing profile approx. W = 770 mm x T rear

Stanje: novo, največja dovoljena obremenitev: 37.560 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Moving-off aid for shunting, connected to the first axle via EBS (no installation required on the truck side) * Last axle as self-steering trailing axle with electro-pneumatic lock * Trailing axle lock for shunting purposes, activated from the cab via EBS (no installation required on the truck side) ----Suspension: * Air suspension with lifting and lowering system, including RtR valve ----Electrics / Lighting: * Smart-Board infotool mounted on trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * 2 additional LED reversing lights * 7-pin socket at rear for overlength lighting * Side marker lights with indicator circuit * Tire pressure monitoring with display in the truck via EBS signal (no installation required on the truck side) ----General Attachments: * Side underrun protection * Landing gear at front, swing supports at rear of the chassis * Straight steel fenders * Spare wheel carrier in front of front wall crossmember (spare wheel not included) * Mechanically adjustable warning sign packages at front and rear * Swing arm as carrier for connection lines from truck to trailer ----Low Loader Deck: * 2nd kingpin position * Saddled platform with 45° chamfered front corners and front toolbox made from galvanized, powder-coated steel sheet (W = 2,480 x H = 500 x L = 665 mm) with folding lid * 400 mm high drop-down/removable aluminium sideboards (custom RAL color) on saddle platform * Removable 150 mm high rear wall * Rear inclined ramp of approx. 700 mm at the end of saddle platform to low-bed deck, fitted with checker plate and lashing bar for attaching aluminium approach ramps * Saddle platform with 50 mm tongued-and-grooved timber floor, low-bed platform with 60 mm tongued-and-grooved timber planks * Tread plate above axles * 9 x mechanical folding extensions to 3 m overall width, but not on rear ramp (extension planks included with lockable transverse storage compartment under load area) * Preparation for 3 ramp storage compartments under saddle platform for either aluminium ramps or timber planks for wheel trough covers Cedpsykx Nqsfx Al Hegt * Preparation for container locks on the gooseneck ----Load Securing (LaSi Package): Saddle Platform: * Perforated external frame, angled at 45°, with hole pattern for lashing equipment (2 t lashing capacity per point, minimum spacing 480 mm) * 3 x 13.4 t recessed tie-down rings per side (1 on saddle platform, 1 on main longitudinal beams after the step, 1 above the center axle beside the beam) Low-bed Deck: * 3 x 13.4 t tie-down rings per side on outer frame (1 at the start of the gooseneck, 1 at the start of the rear ramp, 1 at the end of the ramp) * 2 x 10 t tie-down rings per side (1 between front wheel-well and 1st axle, 1 between 2nd and 3rd axle) * 3 x 5 t tie-down rings per side, bolted to the outer frame of wheel wells (2 at front, 1 at rear wheel well) ----Digger Arm Rest: * Extended digger arm rest from end of last fixed axle over steering axle to end crossmember, continuous with internal reinforcement profile, approx. W = 770 mm x D at rear

Stanje: rabljeno, lastna masa: 8.900 kg, največja dovoljena obremenitev: 40.100 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2025, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: siv, Leto izdelave: 2025, Oprema: ABS, For every used semi-trailer, you will receive a current and comprehensive inspection and functionality report. Chassis: -Robust steel frame welded construction with front frame drop and flat cargo bed with rear taper approx. 500x100 mm -Frame neck 200 mm with beveled front corners -Tapered rear end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in rear taper area) -2 king pin positions with replaceable 2” king pin -Outer frame closed to the outside as hole profile outer frame -Cargo bed with extendable central frame, extendable by approx. 2,000 mm, lockable pneumatically every 500 mm -Frame before and after extension with 80x80 mm step -Reinforced frame design / point load support in retracted position at center of gravity -Without extendable widening sections in the cargo bed, but prepared for retrofitting (= guide tubes welded into the frame) -With excavator recess (without cover), depth approx. 220 mm, width approx. 600 mm, starting after 2nd axle to rear end of vehicle -1 pair of wheel recesses between 1st and 2nd axles with steel covers (covers with Körapur coating), depth approx. 400 mm -Underrun protection = extended rear plate -Drop support legs at rear Floor: -35 mm larch wood floor with aluminum omega profiles Axles, Steering and Tires: -BPW air suspension axles, each with 10 t axle load, air bellows diameter 360 mm -S-cam brakes 300/200 mm, asbestos-free brake pads -Automatic slack adjuster -Lift-and-lower system with total lift approx. 200 mm -2nd ride height via ball valve +50mm -1st axle is a lift axle (wired via EBS), confirmation fully automatic with mechanical emergency activation via push button on the trailer -3rd axle is a friction-steered trailing axle with electric and mechanical lock -12 steel disc wheels, 10-hole, centrally offset -12 tires 245/70 R 17.5 143/141J, tubeless -Including tire pressure monitoring Accessories: -Removable drop sides and rear wall on the gooseneck, approx. 400 mm high -Spare wheel holder -Lateral aluminum side underrun protection -4 wheel chocks with bracket -Elongated license plate holder in the rear plate -1 plug-in ECE sign at rear -11 pairs of 10t lashing modules at the sides: 2x on gooseneck 2x on cargo bed in front of the extension 7x after extension Codpsywv Ixsfx Al Hogt -Without rear towing eyes -Extendable warning boards incl. 3 position lights each, front at landing gear and rear in front of rear plate, steplessly extendable to a load width of 4,500 mm -4 holders for warning boards, insertable in stake pockets on the cargo bed -6 pairs of side stake pockets for plug-in stakes 100x50 mm -2 rows of transverse stake pockets for plug-in stakes 100x50 mm on gooseneck from outer frame inward to main frame (1x before and 1x after kingpin positions) -3 rows of transverse stake pockets for plug-in stakes 100x50 mm on cargo bed from outer frame inward to main frame (1x before extension, 1x after extension, and 1x after 3rd axle) -2 pairs of steel plates in the cargo bed for container locks to accommodate 1x 20ft container -Rubber apron mounted on underrun protection -Prepared (= cable routing for NATO cable and hole pattern for retrofit mounting of NATO socket in front section of rear plate as well as bracket on vehicle) for retrofitting electrohydraulic power pack on right rear in driving direction for potential operation of loading ramps Optional: the trailer is available with aluminum loading ramps

Stanje: rabljeno, konfiguracija osi: 2 osi, prva registracija: 04/2005, barva: črn, Leto izdelave: 2005, Oprema: ABS, = Additional Options and Accessories = - Spare wheel - Twin tires = Notes = Müller Mitteltal 2-axle T5 2AL low loader with ramps Air suspension BPW axles ABS ZSA Tires 60% tread, GR 235R17.5 ID No.: 665 We look forward to welcoming you for consultation, contract signing or vehicle collection at our dealership. Please arrange an appointment in advance. Cgodpfx Aexw T Uaol Het If you are unable to visit us in person, we offer complete processing via phone/email/WhatsApp/fax. On request, we deliver your new vehicle directly to your door. This means you get the best price, maximum security, and convenience when buying your vehicle. Trade-in We are happy to take your used vehicle in part exchange. We offer the possibility of digital vehicle valuation based on your photos, even without visiting our dealership. Our specialized purchasing team offers you a guaranteed top price. On request, we will deliver your new pre-owned vehicle nationwide right to your doorstep and take your old vehicle back with us. Financing – Leasing Immediate approval and settlement of existing loans. Your specialist partner for cars, vans, commercial vehicles, and construction machinery. ITC GmbH & Co KG Siemensstraße 7 32312 Lübbecke (industrial area) Visit us on our website Always over 400 vehicles in stock The information provided in advertisements, online, price tags, and images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typing and data transmission errors. Listed equipment may require separate verification; the offer is generally without new TÜV inspection, but we would be pleased to make you an offer through our partner workshop. Subject to errors and prior sale. = Additional Information = Unladen weight: 8,900 kg Payload: 26,100 kg Gross vehicle weight: 35,000 kg Sales price: €18,000, US$21,210

Stanje: kot nova (razstavni stroj), lastna masa: 10.000 kg, največja dovoljena obremenitev: 30.000 kg, skupna masa: 40.000 kg, konfiguracija osi: 4x2, dolžina tovornega prostora: 9.220 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5, Leto izdelave: 2025, Oprema: ABS, osrednja vrtljiva plošča, spojka prikolice, HTD 40K-RM-BM_ Internal dimensions: approx. 9,220 mm x 2,540 mm Overall dimensions: approx. 11,300 mm x 2,540 mm x 3,850 mm Cedpeiciutofx Al Hogt Permissible total weight: 24,000 kg Payload: approx. 14,000 kg Tyres: 235/75R17.5 inches Loading height: approx. 900 mm Drawbar length: approx. 1,500 mm Coupling height: approx. 820-1,000 mm Ramp angle: approx. 10° Ramp length: approx. 3,150 mm Ramp width: approx. 750 mm Permissible total weight special approval: 40,000 kg Payload special approval: approx. 30,000 kg Low bed length: approx. 6,610 mm Overall dimensions (LxWxH): 11,200 Technical overall weight: approx. 44,000 kg Technical axle load: approx. 11,000 kg 6 pairs of lashing points, 3,000 kg per lashing point Lashing points in the outer frame of the low bed 4 pairs of lashing points, 3,000 kg per lashing point Lashing/stake pockets 3 t in the outer frame of the high bed 1 pair of lashing points, 3,000 kg per lashing point Lashing/stake pockets 3 t in the outer frame of the low bed Suspension Air suspension unit including raising and lowering effective on the rear axle unit Braking system Braking system according to EC directives with EBS 4S/3M in multivoltage version (12-24V), spring-loaded parking brake incl. 2 external test connections for brakes/modulator and bellows pressure Electrics LED lighting with indicator function for side marker lights, multivoltage (12-24V) Turntable Robust welded construction with low-maintenance ball race turntable Towing device Cranked drawbar with towing eye Ø 50mm, low-maintenance silent bushings including height adjustment for drawbar Frame Robust welded construction made of high-strength fine-grained steel Continuous cross members for maximum stability Wheel recesses at the front (top length approx. 2,500 mm - depth approx. 410 mm) and at the rear (top length approx. 1,470 mm - depth approx. 370 mm); without wheel recess covers; Excavator trough (length 1,650 mm, width 750 mm, depth 190 mm) Wheel cut-outs above the rear wheels with wheelbase 2,010 mm, front corners chamfered, rear climbing bars on the incline for maximum safety during loading and unloading 4 pairs of stake pockets (90x50 mm) in the outer frame high bed 1 pair of stake pockets (90x50 mm) in the outer frame low bed Floor 50 mm softwood planking (painted/impregnated) Ramps One-piece hot-dip galvanised loading ramps (3,150 mm x 750 mm) with 50 mm softwood planking (painted/impregnated), laterally adjustable, directly acting upright spring lifters for effortless operation Finishing Chassis frame hot-dip galvanised in immersion bath Support 2 folding supports at the rear left and right at the vehicle rear Equipment Folding side underrun protection, front semicircular plastic mudguards – rear straight steel mudguards with antispray, 2 wheel chocks with holders; contour markings in accordance with ECE Directive R48 Front wheel recess cover with 3 pairs of stake pockets, without planking (cover retractable under the longitudinal beams) 975.00888 Hardwood planking for front wheel recess cover Rear wheel recess cover with 1 pair of stake pockets, without planking (cover retractable under the longitudinal beams) 975.00897 Hardwood planking for rear wheel recess cover 3 pairs of screwed lashing rings 6 t 3 m equipment package without incline B=11,200 Folding extension with softwood boards 970.04199-36 LED warning package HTD cranked Aspöck warning boards 4-fold, electrics and revolving beacon 1 pair of storage compartments for wooden boards 3 m package (2 pieces moun

Stanje: novo, največja dovoljena obremenitev: 26.500 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.450 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, WIESE 3-axle low-loader with ramps and wheel recesses ? NEW Availability approx. 4 months from order ---- Vehicle data Manufacturer: WIESE * Type: WSA 3-36 TL * Year of manufacture: 2025 * Axles: 3 * Gross weight: 39,000 kg * Fifth-wheel load: 12,000 kg * Aggregate axle load: 27,000 kg * Unladen weight: approx. 9,500 kg * Tyres: 235/70 R17.5 * Brakes: WABCO EBS with RSS Cedpoyuq Igsfx Al Hegt ---- Dimensions * Load bed length: 13,450 mm * Low-bed length: approx. 9,550 mm * Fifth-wheel section: approx. 3,640 mm * External width: 2,550 mm * Bed height low-bed: approx. 920 mm * Fifth-wheel height: approx. 1,250 mm ---- Equipment * 3 x SAF axles (9 t) with air suspension * 1st axle with lift function * 3rd axle with trailing steering axle (lockable) * Electronic air suspension E-TASC * WABCO EBS brake system with Roll Stability Support * Tyre pressure monitoring system for 12 tyres * Full LED lighting * 4 x LED work lights * 15-pin + 2 x 7-pin sockets ---- Bodywork * Sturdy steel frame * 28 mm hardwood floor / Omega floor * 13 pairs of lashing rings 8,000 kg * Additional lashing points 5,000 daN * 2 pairs of wheel recesses * Digger arm recess * Aluminium plug-in side boards on the raised deck * Toolbox at the front ---- Ramps * 2 x aluminium drive-on ramps * Dimensions: approx. 2,800 x 600 mm * Load capacity: 27,460 kg * Spring lifting system * Sideways adjustable ---- Miscellaneous * Warning boards for overwidth up to 3 m * Contour marking in accordance with ECE-R48 * Technical documentation and TÜV certificate For further information, we are happy to assist you.

Stanje: novo, lastna masa: 8.900 kg, največja dovoljena obremenitev: 40.100 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 8.900 kg, Chassis: - Robust welded steel frame construction with front frame lowering and level loading platform, rear chamfer approx. 500x100 mm - Neck height 200 mm with chamfered front corners - Chamfered end swan neck approx. 500 x 100 mm (traction ribs on the outer frame in the area of the rear chamfer) - 2 kingpin positions with replaceable 2” kingpin - Outer frame closed to the outside as perforated outer frame Cedjxnnk Depfx Al Hogt - Loading platform with extendable central frame, extendable by approx. 2,000 mm, lockable pneumatically every 500 mm - Frame before and after extension with 80x80 mm step - Reinforced frame design / point load focused in the retracted state - Without extendable loading platform widenings, however, prepared for retrofitting (=guiding tubes welded into the frame) - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting after the 2nd axle, extending to the end of the vehicle - 1 pair of wheel recesses between 1st and 2nd axle with steel covers (covers coated with Körapur), depth approx. 400 mm - Underrun protection = extended end plate - Drop support legs at the rear Axles, Steering and Tyres: - BPW air suspension axles, each with 10 t axle load, air bellows diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lifting and lowering device with total lift approx. 200 mm - 2nd driving position via ball valve +50mm - 1st axle lift axle (wired to EBS), confirmation fully automatic with manual emergency activation via button on semi-trailer - 3rd axle as friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, centered by offset - 12 tyres 245/70 R 17.5 143/141J, tubeless - Including tyre pressure monitoring Accessories: - Plug-in side and rear boards on swan neck, approx. 400 mm high - Spare wheel holder - Side aluminium underrun protection - 4 wheel chocks with holder - Elongated number plate holder in end plate - 1 removable ECE sign at the rear - 11 pairs ZK modules 10t, on the side: - 2x on the swan neck - 2x on the loading platform in front of the extension - 7x after the extension - Extendable warning signs including 3 position lamps each, front at landing gear and rear before end plate, steplessly extendable up to loading width 4,500 mm - 4 plug-in holders for warning signs in stake pockets on loading platform - 6 pairs of stake pockets on the side for plug-in stakes 100x50 mm - 2 transverse rows of stake pockets for plug-in stakes 100x50 mm on the swan neck from the outer frame to the main frame (1x in front of and 1x after the kingpin positions) - 3 transverse rows of stake pockets for plug-in stakes 100x50 mm on the loading platform from outer frame to main frame (1x in front of the extension, 1x after the extension and 1x after the 3rd axle) - 2 pairs of steel plates in the loading platform for container locks to accommodate 1x 20ft container - Rubber apron mounted on underrun protection Optional: The trailer is available with ramps.

Stanje: novo, lastna masa: 8.490 kg, največja dovoljena obremenitev: 40.510 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 8.490 kg, Oprema: ABS, Chassis: - Robust welded steel frame structure with front frame drop and flat loading platform with rear bevel, approx. 500x100 mm - Gooseneck height 200 mm with beveled corners - Gooseneck end with bevel approx. 500 x 100 mm (traction ribs on outer frame in the area behind rear bevel) - 2 kingpin positions with interchangeable 2" kingpin Cjdpswu A Slofx Al Hjgt - Outer frame closed outwards as slotted rail for lashing with tie-down straps - Reinforced frame design / point load at center of gravity - Provisions for extendable deck wideners - With excavator trough (without cover), approx. 220 mm deep, 600 mm wide, starting after the 2nd axle to end of vehicle - 1 pair wheel recesses in front of the axle with steel covers (covers with Körapur coating), approx. 400 mm deep, plus 1 pair wheel recesses between the 1st and 2nd axle with steel covers - Underride protection = extended end plate - Hydraulic drop-down supports at rear Floor: - 35 mm larch timber floor with aluminum omega profiles Axles, Steering, and Tyres: - BPW air suspension axles, each rated at 10 t axle load, bellows diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - Lifting and lowering device, total lift approx. 200 mm - 2nd driving height via ball valve +50mm - 1st axle lift axle (wired through EBS), fully automatic actuation with manual emergency actuation via button on trailer - 3rd axle as friction-steered trailing axle with electric and mechanical locking - 12 steel disc wheels, 10-hole, hub-centered - 12 tyres 245/70 R 17.5 143/141J, tubeless - Incl. tyre pressure monitoring system Braking System: - Dual-line brake system with EBS-E including RSS - EBS (WABCO 4S3M) - Spring-loaded parking brake - Pneumatic connection yellow/red Paintwork: - Steel shot blasting, spray galvanising of chassis and primer - Painting of chassis/wheel hubs/outer frame in DB 7350 Novagrau Accessories: - Removable side and rear boards on the gooseneck, approx. 400 mm high - Spare wheel holder - Side aluminum underrun protection - 4 wheel chocks - Steel fenders with Clear-Pass - Long license plate holder in end plate - 1 removable ECE plate at the rear - 11 pairs ZK modules 10t lateral: - 2x on the gooseneck - 9x on the loading platform - Without rear towing eyes - Extendable warning signs including 3 position lamps each, front at landing legs and rear in front of end plate, steplessly extendable up to 4,500 mm load width - 4 insertable sockets for warning signs in stake pockets on loading platform - 6 pairs stake pockets along sides for 100x50 mm stakes - 2 cross rows of stake pockets for 100x50 mm stakes on the gooseneck from outside frame to main frame (1 before and 1 after kingpin positions) - 3 cross rows of stake pockets for 100x50 mm stakes on loading platform from outer frame to main frame (1 in front section, 1 before 1st axle, 1 after 3rd axle) - 2 pairs steel plates on loading platform for container locks to accept 1x 20ft container - Rubber skirt mounted on underrun protection - Preparation (cable routing for NATO cable and hole pattern for subsequent mounting of NATO socket at front of end plate and bracket on vehicle) for optional retrofit of electrohydraulic power unit at right rear for potential operation of access ramps - Mechanical 24-ton stabiliser landing gear with single-sided operation and compensating shaft Optional: Trailer available with aluminum folding ramps.

Stanje: novo, največja dovoljena obremenitev: 37.390 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-up aid for maneuvering purposes switched to the first axle via EBS (no installation required on the truck side) * Rear axle as self-steering axle with electro-pneumatic steering lock * Locking of the self-steering axle from the driver's cab for maneuvering purposes, controlled via EBS (no installation required on the truck side) ----Suspension: * Air suspension with lifting/lowering device and Ride-to-Return valve ----Electrics / Lighting: * Smart Board mounted on the trailer as an information tool with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12/24 V * LED rotating beacon (removable) at the rear * 2 additional LED reversing lights * 7-pin socket at rear for extended length lighting * Side marker lights with indicator signal control * Tyre pressure monitoring system with display option in the truck via EBS signal (no installation required on the truck side) ----General equipment: * Side underrun protection * Landing gears at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall crossmember (without spare wheel) * Mechanically adjustable warning sign packages at front and rear * Swing arm as carrier for connecting cables from truck to semi-trailer ----Low loader deck: * 2nd king pin position * Fifth wheel platform with 45° chamfered front corners and front tool box made of galvanized powder-coated sheet steel B = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm high aluminium side boards (in RAL colour of choice) on the sides of the fifth wheel platform, foldable and removable * Rear wall -150 mm- high plug-in * Rear slope on fifth wheel platform to low bed approx. 700 mm long with tread plate covering and at the end a perforated strip for attaching aluminium loading ramps * Fifth wheel platform with 50 mm clamped wooden planks and low bed platform with 60 mm clamped wooden planks * Tear plate above the axles * 9 x mechanical folding extensions to 3 m overall width, but not in the rear slope (extension planks available with closed storage compartment across the direction of travel under the loading floor) Cedpeq Euakjfx Al Hjgt * 3 mounting shafts under the fifth wheel platform for storage of optional aluminium loading ramps or wooden planks for wheel well coverings ----Load securing (LaSi package): Fifth wheel platform: * Perforated outer frame angled at 45° with hole pattern for lashing points (2 t lashing capacity per point at a minimum spacing of 480 mm) * 3 x 13.4 t lashing rings each side recessed in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal beams after the drop, 1 x above the centre axle next to the longitudinal beam) Low loader platform: * 3 x 13.4 t lashing rings each side on the outer frame (1 x beginning of the drop on the fifth wheel platform, 1 x beginning of the ramp slope, 1 x end of the ramp slope) * 2 x 10 t lashing rings each side (1 x between front wheel well and 1st axle, 1 x between 2nd and 3rd axle) * 3 x 5 t lashing rings each side bolted to the outer frame of the wheel wells (2 on the front wheel well, 1 on the rear wheel well) ----Excavator arm recess: * Extended excavator arm recess from end of last fixed axle through to steering axle up to rear crossmember, continuous with

Stanje: novo, največja dovoljena obremenitev: 37.390 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Traction aid for shunting purposes engaged on the first axle via EBS (without truck-side installation) * Last axle as trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle from the driver's cab for shunting via EBS (without truck-side installation) ----Suspension: * Air suspension with lifting and lowering function as well as RtR valve ----Electrics / Lighting: * Smart Board mounted on trailer as info tool with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting 12 / 24 V * LED rotating beacon (removable) at the rear * 2 extra LED reversing lights * 7-pin socket at the rear for additional length lighting * Side marker lights with indicator activation * Tire pressure monitoring system with display option in the truck via EBS signal (without truck-side installation) ----General attachments: * Side underrun protection * Landing gears at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the headboard crossmember (without spare wheel) * Mechanically adjustable warning sign packages at the front and rear * Swivel arm as carrier for connection cables from truck to semi-trailer ----Lowbed platform: * Second kingpin position * Fifth wheel platform with 45° bevelled front corners and front toolbox made of galvanised, powder-coated steel sheet, W = 2,480 mm x H = 500 mm x L = 665 mm with folding lid * Side aluminium drop sides, 400 mm high (in RAL custom colour), foldable and removable * Rear wall -150 mm- high plug-in * Rear slope on the saddle platform to the lowbed approx. 700 mm long with chequer plate covering and a perforated strip at the end for attaching aluminium loading ramps Cgodpfxstpta Ds Al Hot * Fifth wheel platform with 50 mm clamped wooden planks and lowbed platform with 60 mm clamped wooden planks * Tread plate over the axles * 9 x mechanical folding wideners to 3 m overall width, not in rear slope (widening planks available with sealed crosswise storage compartment under the loading area) * 3 mounting shafts under the saddle platform for the storage of either aluminium loading ramps or wooden planks for wheel well covering ----Load securing (LaSi-package): Fifth wheel platform: * Perforated outer frame, 45° angled, with hole pattern for lashings (2 t lashing capacity per tie-down point at a minimum spacing of 480 mm) * 3 x 13.4 t recessed lashing rings per side in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal members after the cranking, 1 x above the central axle next to the longitudinal member) Lowbed platform: * 3 x 13.4 t lashing rings per side on the outer frame (1 x at the start of the cranked platform, 1 x at the start of the access slope, 1 x at the end of the access slope) * 2 x 10 t lashing rings per side (1 x between the front wheel well and 1st axle, 1 x between the 2nd and 3rd axle) * 3 x 5 t lashing rings per side bolted to the outer frames of the wheel wells (2 at the front wheel well, 1 at the rear wheel well) ----Excavator arm rest: * Extended excavator arm rest from end of last rigid axle over steering axle to end crossmember, continuous with internal reinforcing profile approx. W = 770 mm x D rear = 270 mm / D front = 170 mm * 2 x 6.4 t lashing rings per side in the exca