Meusburger Meusburger Mps-3, Mega, Jumbo nakup rabljenega (39.030)

Stanje: rabljeno, lastna masa: 6.750 kg, največja dovoljena obremenitev: 24.750 kg, prva registracija: 04/2011, naslednji pregled (TÜV): 10/2025, skupna širina: 25.500 mm, vzmetenje: zrak, velikost pnevmatike: 425 / 65 R 22.5 / 6mm, velikost sprednje pnevmatike: 425 / 65 R 22.5 / 6mm, obratovalna teža: 31.500 kg,

Stanje: rabljeno, največja dovoljena obremenitev: 28.000 kg, skupna masa: 38.500 kg, konfiguracija osi: 3 osi, prva registracija: 03/2018, naslednji pregled (TÜV): 03/2027, dolžina tovornega prostora: 13.480 mm, širina tovornega prostora: 2.540 mm, Oprema: ABS, * 9008 – Vehicle ID for telephone inquiries * Low-bed semi-trailer, type: MTS-3 * Special low-bed semi-trailer for transporting work platforms with foldable rear section * ABS, EBS, BPW Eco Plus axles, twin tires, air suspension with lift and lower function, 1st axle liftable, 3rd axle friction-steered with additional steering * Gooseneck, front wall, lashing rings, storage boxes * 24 V electric pump powered via NATO socket * Electric winch * Remote control for winch and hydraulics * Hydraulically lowerable and foldable loading platform at the rear, ramp extendable hydraulically * Hydraulically raised ramp at the gooseneck transition * Grating floor over the entire loading area * Technically permissible total weight: 41,500 kg * Tires 1st axle: 235/75R17.5 ( 6 / 8 / 11 / 11 mm ) * Tires 2nd axle: 235/75R17.5 ( 9 / 9 / 9 / 9 mm ) * Tires 3rd axle: 235/75R17.5 ( 11 / 11 / 9 / 9 mm ) ----Our email address: Our service for you: Gedpfx Absy I Iahj Isbn – Procurement of short-term or export license plates – Transfer / delivery EU-wide – Customs clearance for vehicles to third countries If you have questions in Russian, you can call the following number * WhatsApp just for Russian speakers: * WhatsApp for English, German and other languages:

Stanje: rabljeno, skupna masa: 47.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2008, FRANÇAIS Visitez notre site internet, où vous trouverez notre stock complet avec de nombreuses autres photos et des informations dans plusieurs langues. SEL 8001 Meusburger MTS-3 Télescopique / 13 085 - 17 385 mm / Essieu directeur Immatriculation allemande Mise en circulation : 18.11.2008 PTAC technique (kg) : 49.000 PTAC autorisé (kg) : 47.000 Poids à vide (kg) : 7.670 N° de série (VIN) : W09TS300980M49145 PNEUMATIQUES ET ESSIEUX : Pneumatiques : 245/70 R 17,5 Configuration des essieux : 3 Essieux BPW 3ème Essieu : Essieu suiveur à friction Suspension pneumatique Freins à tambour Godpfxjxpl Nts Ab Iebn AUTRES SPÉCIFICATIONS : Télescopique DOCUMENTS DU VÉHICULE : Certificat d’immatriculation Carte grise M. BUFANO m. (Italien, Anglais, Allemand) J. CORDEIRO j. (Portugais, Espagnol, Italien, Anglais) J. MARJANOVIC j. (Allemand, Bosnien) L. OBODYNSKA (Ukrainien/?????, Russe/??-?????) Nous parlons : ALLEMAND, ANGLAIS, ITALIEN, ESPAGNOL, PORTUGAIS, UKRAINIEN, RUSSE, POLONAIS, BOSNIEN Bien que tous les efforts aient été faits pour garantir l’exactitude des informations, nous ne pouvons être tenus responsables des erreurs ou omissions éventuelles. Nous invitons nos clients à consulter les photos disponibles. Les mesures indiquées sont des valeurs approximatives. Nos véhicules sont vendus dans leur état actuel. Nous invitons nos clients à visiter notre société afin d’inspecter personnellement l’état du véhicule. Nous offrons également la possibilité d’un essai routier. Il est important de noter que les batteries livrées avec le véhicule sont celles actuellement installées. Si le client souhaite des batteries neuves, nous restons à disposition pour une information sur le prix.

Stanje: rabljeno, največja dovoljena obremenitev: 36.250 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2015, dolžina tovornega prostora: 12.350 mm, širina tovornega prostora: 2.490 mm, višina nakladalnega prostora: 800 mm, skupna širina: 2.550 mm, skupna višina: 3.030 mm, Oprema: ABS, Meusburger kesonska polprikolica s 3 osmi Tip: MPS-3 Zavorni sistem: kolutne zavore Nosilnost: 36.250 kg Os: BPW 1x dvižna os 2x podporni točki Gsdpfx Abjy Iibto Iobn Keson: Dolžina: 12,35 m Širina: 2,49 m Višina: 0,80 m Z veseljem vam pomagamo tudi pri financiranju/leasingu skupaj z našimi partnerji. Vse informacije so brez garancije. Pridržujemo si pravico do napak in vmesne prodaje.

Stanje: rabljeno, največja dovoljena obremenitev: 31.300 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2019, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.050 mm, skupna širina: 2.550 mm, Oprema: ABS, Meusburger MPG-3 Nizkopodnožno prikolica s ponjavo, krmiljena/dvigljiva os Oprema: zračno vzmetenje Godpfx Abowfwd Do Ijbn * Tehtnica za os * 1. os dvigljiva * 3. os krmiljena * Hidravlična rampa z dodatno podporo in daljinskim upravljanjem * Prehodna rampa * Električni vitel z daljinskim upravljanjem * Edscha streha * Stranski zaboji za shranjevanje * Rezervno kolo s standardno pnevmatiko * Dodatni žarometi * Izvlečne table za izredne širine Varnost: ABS * EBS * Kolutne zavore Pridržujemo si pravico do napak in predhodne prodaje. Interna številka vozila: 8303

Stanje: rabljeno, največja dovoljena obremenitev: 39.470 kg, skupna masa: 48.400 kg, konfiguracija osi: 3 osi, prva registracija: 02/2012, naslednji pregled (TÜV): 11/2026, skupna širina: 2.550 mm, Leto izdelave: 2012, Oprema: ABS, 4-axle Meusburger MTS-4 low-loader semi-trailer VIN: WO9TS401C0M49438 Chassis / Attachments: * Air suspension with raise/lower function * First axle liftable * Axle 3 and 4 trailing steered / friction steered * EBS / ABS braking system * 4 x BPW ECO axles with drum brakes * Tyres: 205/65 R17.5 * Tyre tread remaining: * Axle 1: approx. 60% / 60% * Axle 2: approx. 30% / 60% * Axle 3: approx. 30% / 60% * Axle 4: approx. 30% / 60% Gjdoy Trmvjpfx Ab Ijbn * 6 x PVC storage boxes * 2 x spare wheels * Rear landing supports * Wide-load marker boards * 6 pairs of heavy-duty lashing rings * 9 pairs of lashing rings Body: * Low-bed semi-trailer * Upper deck length: approx. 3,650 mm * Lower deck length: approx. 9,870 mm * Total loading area length: approx. 13,520 mm * Internal width: approx. 2,550 mm * Loading height: approx. 870 mm * 8 pairs of long stanchions * 1 pair of short stanchions * 6 pairs of outer stanchion pockets * 1 pair of upper deck stanchion pockets * 1 pair of centrally positioned stanchion pockets, upper deck Weights: * Permissible total weight: 48,400 kg * Unladen weight: approx. 8,930 kg * Payload: approx. 39,470 kg Other: * German registration * TÜV valid until 11/2026 * Safety inspection (SP) valid until 05/2027 * Immediately operational New main inspections / safety checks, or adjustment of weight ratings (downrating/uprating), are possible upon request. We will gladly assist you with obtaining export/temporary license plates as well as arranging transfer of your purchased vehicles within Germany. Contact us! — We speak the following languages: German, English, and Russian! — No liability for printing and typing errors. Subject to changes, prior sale, and errors! — Who are we? Leible Nutzfahrzeuge is a family-run company based in Kehl am Rhein. With our many years of experience in vehicle preparation and sales, we are a reliable partner for customers worldwide. Our particular strength at Leible Nutzfahrzeuge is the sale of new and used commercial vehicles. On 11,000 m², you will find a wide variety of vehicles. Our company philosophy is characterised by fairness and integrity. Since customer satisfaction is very important to us, we offer an excellent all-round service package and provide a competent contact person to assist you in the purchase or sale of vehicles. See for yourself! Our services for you: Loading of vehicles We gladly assist you with loading of your purchased vehicles. Organisation of special transports We gladly assist in organising special transport. Temporary/export license plates We will gladly help you obtain export or short-term license plates. Handling customs formalities We also assist you in completing customs-related matters.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 12.000 kg, največja dovoljena obremenitev: 30.000 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 10.000 kg, dovoljena osna obremenitev (os 2): 10.000 kg, dovoljena osna obremenitev (os 3): 10.000 kg, prva registracija: 05/2021, naslednji pregled (TÜV): 05/2027, vzmetenje: zrak, stanje pnevmatik: 80 odstotek, barva: rdeča, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2021, Oprema: ABS, sprednja zaščita, REDKI MODEL, MEUSBURGER 2021, Raztegljiva mega, 7 m razširitve, skupno 20 m, ALVEOLE, PRIPRAVLJENA ZA DELO! Gedpfxjy Udvle Ab Isbn

Stanje: rabljeno, lastna masa: 10.100 kg, največja dovoljena obremenitev: 38.900 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2025, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, velikost pnevmatike: 245/70 R 17,5, barva: siv, Leto izdelave: 2025, For every used semi-trailer, you receive a current and complete inspection and functional report. Chassis: - Robust steel frame welded construction with front cranked frame and flat loading area, inclined at the rear approx. 500x100 mm - Frame neck 200 mm with chamfered corners - Sloped end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in the rear sloped area) - 2 kingpin settings with replaceable 2" kingpin - Outer frame closed outward as perforated external frame for lashing with tension straps (chains not possible) - Reinforced frame design / point load at the center of gravity - Provisions for extendable load floor widenings - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting after 2nd axle to end of vehicle - 1 pair of wheel recesses in front of the axle with steel covers - (Covers with Körapur coating), depth approx. 400 mm, and 1 pair of wheel recesses between 1st and 2nd axle steel covers Gsdpfx Abezabnbs Iebn - Underrun protection = extended end plate - Drop-down supports at rear Ramps: - 2-piece special-design loading ramps, mechanically extendable - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lift (only in conjunction with electrohydraulic unit) - Width approx. 800 mm - Wood surface - Incl. traction ribs on loading ramps - Can be secured in driving position with tension straps - Actuated via control lever mounted to the right at rear in direction of travel - Laterally hydraulically adjustable Floor: - 35 mm larch wooden floor with aluminum omega profiles Landing Gears: - Mechanical 24t landing gears with one-side operation and push rod compensation Axles, Steering and Tyres: - BPW air suspension axles, each 10t axle load, air bag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lift and lower mechanism with total lift approx. 200 mm - 2nd driving position via ball valve +50mm - 1st axle lift axle (wired via EBS), fully automatic control with mechanical emergency operation via button on the trailer - 3rd axle self-steering trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, with centered offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring Accessories: - Plug-in side and rear walls approx. 400 mm high on gooseneck - Spare wheel holder - Lateral aluminum side underrun protection - 4 wheel chocks with holders - Long license plate holder in end plate - 1 ECE-board insertable at the rear - 11 pairs of ZK modules 10t laterally: - 2x on the gooseneck - 9x on the loading area - Extendable warning signs incl. 3 position lights each, at front on landing gears and rear before end plate, infinitely extendable up to loading width of 4,500 mm - 4 fittings for warning signs, plug-in to pockets on loading area - 6 pairs of stake pockets at sides for stakes 100x50 mm - 2 rows of crosswise stake pockets for stakes 100x50 mm on gooseneck from outer frame inwards up to main frame (1x before and 1x after kingpin positions) - 3 rows of crosswise stake pockets for stakes 100x50 mm on load area from outer frame inwards up to main frame (1x front, 1x before 1st axle, 1x after 3rd axle) - 2 pairs of steel plates in loading area for container locks to accommodate one 20ft container - Rubber skirt mounted on underrun protection

Stanje: rabljeno, največja dovoljena obremenitev: 32.960 kg, skupna masa: 40.000 kg, prva registracija: 11/2017, Interna št. vozila: MK300014 Gsdjydtydspfx Ab Iobn Več INFO pri Luis Lucena (nemško, angleško, špansko, francosko) Viktoria Sologubova (poljsko, rusko, ukrajinsko, angleško) Pridržujemo si pravico do napak. Vaše rabljeno vozilo z veseljem vzamemo v račun. Financiranje možno neposredno pri nas. GOLEC NUTZFAHRZEUGE GMBH Govorimo: nemško, angleško, špansko, poljsko, ukrajinsko, rusko, bolgarsko.

Stanje: rabljeno, barva: zelen, Leto izdelave: 2017, Meusburger MTS-4. Baujahr: 2017. 8 t BPW-Achsen. Gbjdpjy I T Abjfx Ab Ion Leergewicht: 10.510 kg. Nutzlast: 39.490 kg. Max. Gesamtgewicht: 50.000 kg. Sattellast: 18.000 kg. Auf 4 Meter ausziehbar. 1. Achse Liftachse. 3. und 4. Achse gelenkte Nachlaufachsen. Verzinkt. Twistlocks. Luftfederung. EBS, ABS, ALB. Abmessungen Ladefläche: Hals: L: 3.900 mm. B: 2.540 mm. H: 1.100 mm. Sattelhöhe: 1.000 mm. Ladefläche: L: 9.620 mm. B: 2.540 mm. H: 800 mm. Reifen: 205/65R17,5, 80 % Profil. Deutscher Auflieger! ID-Nr.: 623. Die Allgemeinen Geschäftsbedingungen der Firma Heinhuis gelten für alle Anzeigen, Angebote und Offerten der Firma Heinhuis, für alle mit der Firma Heinhuis abgeschlossenen Verträge sowie für die diesen vorausgehenden Verhandlungen. Mit jeder Form der Antwort akzeptieren Sie die Geltung der Allgemeinen Geschäftsbedingungen von Heinhuis und erklären, dass Sie von deren Inhalt Kenntnis genommen haben. Unsere Preise sind Netto-Exportpreise. = Weitere Informationen = Baujahr: 2017 Leergewicht: 10.510 kg Nutzlast: 39.490 kg zulässiges Gesamtgewicht: 50.000 kg Ausziehbarer Aufbau: Ja = Firmeninformationen = Für weitere Informationen: WhatsApp:

Stanje: rabljeno, največja dovoljena obremenitev: 26.520 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, prva registracija: 08/2012, Leto izdelave: 2012, Oprema: ABS, Semi-trailer Meusburger MPS-2, steered axles, crane Palfinger PK 26002, radio remote control, 4 extensions incl. rotator, 5,500kg at 4m, 1,700kg at 12m. Tractor unit MAN TGS 26.440 6X2 Euro 5 EEV, retarder, dual-circuit hydraulics. Condition: Very good, passed technical inspection (TÜV). Tyres: 65-95% tread remaining. Gjdporcz Izofx Ab Isbn

Stanje: novo, lastna masa: 8.900 kg, največja dovoljena obremenitev: 40.100 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 8.900 kg, Chassis: - Robust welded steel frame construction with front frame lowering and level loading platform, rear chamfer approx. 500x100 mm - Neck height 200 mm with chamfered front corners - Chamfered end swan neck approx. 500 x 100 mm (traction ribs on the outer frame in the area of the rear chamfer) - 2 kingpin positions with replaceable 2” kingpin - Outer frame closed to the outside as perforated outer frame - Loading platform with extendable central frame, extendable by approx. 2,000 mm, lockable pneumatically every 500 mm - Frame before and after extension with 80x80 mm step - Reinforced frame design / point load focused in the retracted state - Without extendable loading platform widenings, however, prepared for retrofitting (=guiding tubes welded into the frame) - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting after the 2nd axle, extending to the end of the vehicle - 1 pair of wheel recesses between 1st and 2nd axle with steel covers (covers coated with Körapur), depth approx. 400 mm - Underrun protection = extended end plate - Drop support legs at the rear Axles, Steering and Tyres: - BPW air suspension axles, each with 10 t axle load, air bellows diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake linings Gbedpexnnk Dofx Ab Ien - Automatic slack adjuster - Lifting and lowering device with total lift approx. 200 mm - 2nd driving position via ball valve +50mm - 1st axle lift axle (wired to EBS), confirmation fully automatic with manual emergency activation via button on semi-trailer - 3rd axle as friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, centered by offset - 12 tyres 245/70 R 17.5 143/141J, tubeless - Including tyre pressure monitoring Accessories: - Plug-in side and rear boards on swan neck, approx. 400 mm high - Spare wheel holder - Side aluminium underrun protection - 4 wheel chocks with holder - Elongated number plate holder in end plate - 1 removable ECE sign at the rear - 11 pairs ZK modules 10t, on the side: - 2x on the swan neck - 2x on the loading platform in front of the extension - 7x after the extension - Extendable warning signs including 3 position lamps each, front at landing gear and rear before end plate, steplessly extendable up to loading width 4,500 mm - 4 plug-in holders for warning signs in stake pockets on loading platform - 6 pairs of stake pockets on the side for plug-in stakes 100x50 mm - 2 transverse rows of stake pockets for plug-in stakes 100x50 mm on the swan neck from the outer frame to the main frame (1x in front of and 1x after the kingpin positions) - 3 transverse rows of stake pockets for plug-in stakes 100x50 mm on the loading platform from outer frame to main frame (1x in front of the extension, 1x after the extension and 1x after the 3rd axle) - 2 pairs of steel plates in the loading platform for container locks to accommodate 1x 20ft container - Rubber apron mounted on underrun protection Optional: The trailer is available with ramps.

Stanje: novo, lastna masa: 9.400 kg, največja dovoljena obremenitev: 39.600 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 9.400 kg, Oprema: ABS, Chassis: - Robust welded steel frame construction with a front frame depression and flat loading platform, rear taper approx. 500x100 mm - Gooseneck height 200 mm with beveled corners at the front - Tapered end of gooseneck approx. 500 x 100 mm (traction ribs on the outer frame in the area of the rear bevel) - 2 king pin positions with replaceable 2" king pin - Outer frame closed outward, punch-hole design - Loading platform with extendable central frame, can be extended approx. 2,000 mm in increments of 500 mm, pneumatically lockable - Step 80x80 mm in the frame before and after the division - Reinforced frame version / point load in retracted position at center of gravity - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting approx. after 2nd axle to vehicle end - 1 pair of wheel recesses between 1st and 2nd axle with steel covers (covers with Körapur coating), depth approx. 400 mm - Underrun protection = extended rear plate - Drop leg supports at the rear Ramps: - 2 single-piece aluminum ramps, special version with spring-assisted lifting - Length x width approx. 2,500 mm x 600 mm - Lockable in transit position with lashing straps - Manually adjustable sideways Axles, Steering and Tyres: - BPW air suspension axles, each with 10 t axle load, airbag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - Lifting and lowering device with a total lift of approx. 200 mm - 2nd ride height via ball valve +50 mm - 1st axle as lift axle (wired via EBS), fully automatic activation with manual emergency actuation via button on semi-trailer - 3rd axle as self-steering trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, center-offset - 12 tyres 245/70 R 17.5 143/141J, tubeless - Tyre pressure monitoring included Floor: - 35 mm larch wood floor with aluminum omega profiles Landing Gear: - Mechanical 24 t landing gear with single-side operation and compensating support Paintwork: - Steel grit-blasted, spray-galvanized chassis and primed - Chassis/wheel hubs/outer frame painted in DB 7350 Novagrey - Reflective side and rear stripes in yellow Accessories: - Plug-in side and rear panels on gooseneck, approx. 400 mm high - Spare wheel holder - Lateral aluminum underrun protection - 4 chocks with holders - Elongated license plate holder in rear plate - 1 ECE panel at the rear, plug-in - 11 pairs ZK modules 10t, side-mounted: - 2x on gooseneck - 2x on loading platform before extension - 7x after extension - Extendable warning signs incl. 3 position lights each, at front landing gear and before rear plate, infinitely extendable up to load width 4,500 mm - 4 holders for warning signs, plug-in to stake pockets on loading platform - 6 pairs of lateral stake pockets for 100x50 mm plug-in stakes - 2 cross rows of stake pockets for 100x50 mm plug-in stakes on gooseneck from outer frame inwards to main frame (1x before and 1x after king pin positions) Gbsdpfoxnym Dex Ab Ion - 3 cross rows of stake pockets for 100x50 mm plug-in stakes on loading platform from outer frame inwards to main frame (1x before extension, 1x after extension and 1x after 3rd axle) - 2 pairs of steel plates in loading platform for container locks to accommodate 1x 20ft container - Rubber apron mounted to underrun protection

Stanje: novo, lastna masa: 10.100 kg, največja dovoljena obremenitev: 38.900 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, velikost pnevmatike: 245/70 R 17,5, obratovalna teža: 10.100 kg, Oprema: ABS, Chassis: - Sturdy welded steel frame construction with front frame cranking and flat loading platform, rear ramped section approx. 500x100 mm - Gooseneck 200 mm with beveled corners - Sloped gooseneck end approx. 500x100 mm (traction ribs on outer frame behind rear inclination) - 2 kingpin positions with replaceable 2" kingpin - Outer frame closed on the outside as perforated frame for lashing with tension belts (chains not permitted) - Reinforced frame design / point load at the center of gravity - Prepared for extendable load platform widenings - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting after 2nd axle to end of vehicle - 1 pair wheel recesses in front of axle with steel covers (covers with Körapur coating), depth approx. 400 mm, and 1 pair between 1st and 2nd axle, steel covers - Underrun protection = extended end plate - Drop-down supports at rear Ramps: - 2-piece drive-up ramps, custom design, with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting mechanism (only in connection with electrohydraulic unit) - Width approx. 800 mm - Wood topping - Incl. traction ribs on ramps - Can be secured for travel with tension belts - Operated by manual lever mounted rear right in direction of travel - Hydraulically laterally shiftable Floor: - 35 mm larch wood floor with aluminum omega profiles Landing Gears: Godpfx Abswviwko Isbn - Mechanical 24 t landing gears, operated from one side with load equalization Axles, Steering, and Tires: - BPW air suspension axles, each rated at 10 t axle load, airbag diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lift and lower device, total stroke approx. 200 mm - 2nd drive position via ball valve +50 mm - 1st axle as lift axle (wired via EBS), operation fully automatic with mechanical emergency actuation via button on trailer - 3rd axle as friction steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, center-fitted offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring Accessories: - Plug-in side walls and rear wall on gooseneck approx. 400 mm high - Spare wheel holder - Lateral aluminum underrun protection - 4 wheel chocks - Long license plate holder in end plate - 1 detachable ECE sign at rear - 11 pairs ZK modules 10t on the sides: - 2x on the gooseneck - 9x on the load platform - Steel mudguards with clear pass - Extendable warning panels incl. 3 position lamps each, front at landing gears and rear before end plate, infinitely extendable up to loading width 4,500 mm - 4 plug-in holders for warning panels in stake pockets on loading surface - 6 pairs of lateral stake pockets for 100x50 mm stakes - 2 rows of crosswise stake pockets for 100x50 mm stakes on the gooseneck from outer frame towards main frame (1x before and 1x after kingpin positions) - 3 rows of crosswise stake pockets for 100x50 mm stakes on loading platform from outer frame towards main frame (1x in front area, 1x before 1st axle, 1x after 3rd axle) - 2 pairs of steel plates in load platform for container locks to receive 1x 20ft container - Rubber apron mounted on underrun protection - Steel shot blasting, chassis hot-dip galvanized and primed - Chassis/wheel hubs/outer frame painted in DB 7350 Nova grey

Stanje: novo, lastna masa: 9.800 kg, največja dovoljena obremenitev: 39.200 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 9.800 kg, Oprema: ABS, Chassis: - Robust welded steel frame construction with a front frame dip and flat loading platform featuring a rear bevel approx. 500x100 mm - Frame neck 200 mm with chamfered corners at the front - Sloped swan neck end approx. 500 x 100 mm (with anti-slip profile strips on outer frame in the area behind the rear bevel) - 2 king pin positions with replaceable 2” king pin - Outer frame closed to the outside and designed as perforated outer frame - Loading platform with extendable central frame, extendable by around 2,000 mm, lockable in 500 mm increments pneumatically - Frame with 80x80 mm step at and after extension joint - Reinforced frame design / maximum point load when retracted at center of gravity - Without extendible load platform outriggers, but pre-fabricated to allow retrofit (= guide tubes welded in frame) - With excavator trough (no cover), approx. 220 mm deep, 600 mm wide, starting behind 2nd axle to vehicle end - 1 pair of wheel wells between 1st and 2nd axles, covered with steel plates (covers with Körapur coating), approx. 400 mm deep - Rear underrun protection = extended rear plate - Drop-down supports at the rear Ramps: - 2 two-piece loading ramps, special design with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting device (only with electro-hydraulic unit) - Width approx. 800 mm - Wooden surfacing - Including anti-slip strips on ramps - Can be locked in transport position with tie-down straps - Operated by control lever mounted on rear right in frame - Hydraulically laterally adjustable Floor: - 35 mm larch wood floor with aluminium omega profiles Landing legs: - Mechanical 24-ton landing legs with single-sided operation and compensating device Axles, steering and tires: - BPW air suspension axles, each with 10-ton axle load, air bellows diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - Lifting and lowering system with total lift approx. 200 mm - 2nd driving position via ball valve +50 mm - 1st axle lift axle (wired through EBS), automatic control, with manual override button on the trailer - 3rd axle as friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, center offset by center bore - 12 tires, 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring system Accessories: - Insertable side and rear stakeboards on the swan neck, approx. 400 mm high - Spare wheel carrier Gbedpfoxgm S Dsx Ab Isn - Side aluminium underrun protection - 4 chocks - 1 plug-in ECE rear warning board - 11 pairs of ZK modules 10t, lateral: - 2x on the swan neck - 2x on loading area before extension - 7x after extension - Extendable warning signs including 3 position lamps each, at the front on landing legs and rear before the rear plate, steplessly extendable up to 4,500 mm loading width - 4 plug-in sockets for warning signs in stake pockets on the loading platform - 6 pairs of stake pockets laterally for 100x50 mm stakes - 2 cross rows stake pockets for 100x50 mm stakes on swan neck, from outer frame to main frame (1x before/1x after king pin positions) - 3 cross rows stake pockets for 100x50 mm stakes on loading area from outer frame to main frame (1x before the extension, 1x after extension, 1x after the 3rd axle) - 2 pairs of steel plates in the loading platform for container locks to accommodate 1x 20ft container - Rubber apron mounted on underrun protection

Stanje: novo, lastna masa: 8.950 kg, največja dovoljena obremenitev: 40.050 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 8.950 kg, Oprema: ABS, Chassis: - Robust welded steel frame construction with front frame cranking and flat loading area with rear taper approx. 500x100 mm - Neck of frame 200 mm with beveled corners - Tapered end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in area behind rear taper) - 2 king pin positions with replaceable 2" king pin - Outer frame closed outside as perforated outer frame for lashing with tie-down straps - Reinforced frame design / point load at center of gravity - Prepared for extendable width extensions in the loading area - With excavator trough, depth approx. 220 mm, width approx. 600 mm, starting after the 2nd axle to end of vehicle - 1 pair of wheel recesses in front of axle with steel covers - (Covers with Körapur coating), depth approx. 400 mm and 1 pair of wheel recesses between 1st and 2nd axle with steel covers - Underrun protection = extended end plate - Drop-leg supports at rear Ramps: - 2 pieces, single-part aluminium loading ramps with spring lift system - Dimensions (L x W) approx. 2,500 mm x 600 mm Gedpfxswu Agie Ab Ijbn - Can be locked in transport position with tie-down straps - Laterally adjustable by hand Floor: - 35 mm larch wood floor with aluminium omega-profiles Landing Gear: - Mechanical 24 t landing gears with single-sided operation and load compensation Axles, Steering, and Tyres: - BPW air suspension axles, 10 t axle load each, air spring diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - Lift/lowering device with total travel approx. 200 mm - 2nd driving position via ball valve +50mm - 1st axle lift axle (wired via EBS), fully automatic confirmation with mechanical emergency operation by push button on trailer - 3rd axle is friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, hub-centered - 12 tyres 245/70 R 17.5 143/141J, tubeless - Incl. tyre pressure monitoring Brake System: - Two-line brake system with EBS-E including RSS - EBS (WABCO 4S3M) - Spring-loaded parking brake - Air connections yellow / red Paintwork: - Steel shot-blasting, chassis spray galvanising and priming - Chassis / wheel hub / outer frame painted in DB 7350 Novagrau - Plastic parts black, unpainted - Rims: factory silver - Reflective strips on sides and rear in yellow Accessories: - Removable side and rear walls approx. 400 mm high on gooseneck - Spare wheel bracket - Aluminium bump guard - 4 wheel chocks - Sheet metal mudguards with Clear-Pass - Long licence plate holder in end plate - 1 removable ECE board at rear - 11 pairs ZK modules 10 t at sides: - 2x on gooseneck - 9x on loading area - Without tow rings at rear - Extendable warning boards incl. 3 position lights each, front at landing gears and rear before end plate, infinitely extendable to loading width 4,500 mm - 4 mounting holders for warning boards plug-in type in stake pockets on loading area - 6 pairs of stake pockets at sides for 100x50 mm plug-in stakes - 2 rows transversely on gooseneck for 100x50 mm plug-in stakes from outer frame to main frame (1x before and 1x after king pin positions) - 3 rows transversely on loading area for 100x50 mm plug-in stakes from outer frame to main frame (1x front section, 1x before 1st axle, 1x after 3rd axle) - 2 pairs of steel plates in loading area for container locks, suitable for 1x 20ft container - Rubber apron fitted on underrun protection

Stanje: novo, lastna masa: 11.000 kg, največja dovoljena obremenitev: 27.000 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.300 mm, širina tovornega prostora: 2.550 mm, velikost pnevmatike: 235/75 R17.5, barva: siv, obratovalna teža: 11.000 kg, Oprema: ABS, Chassis: - Welded steel frame construction with front and rear frame cranks and a lowered bed without rear chamfer - Neck and kingpin plate 225 mm - Lowered bed rated for 25 t point load over 5 m Gsdpfxoiu Eu Ne Ab Iobn - Outer frame closed to the outside with welded-on lashing rings for securing - Interchangeable 2" king pin - Rear hook-in rail for aluminum ramps Axles and Tyres: - BPW low-loader axles, each with a 10 t axle load, air bellows diameter 360 mm - Air suspension with lifting and lowering function, stroke 220 mm (-60/+160 mm) - Wabco SmartBoard with ECAS function for 2 coupling heights +100 mm - S-cam brakes 300/200 mm, asbestos-free brake pads - Automatic slack adjusters - IVTM tyre pressure monitoring - 9 tyres 235/75 R 17.5, tubeless Steering: - 1st and 2nd axles hydraulically forced steered via fifth wheel coupling Floor: - Multi-layer bonded board floor, 27 mm thick, flush with outer frame and longitudinal beams - Underside reinforced with GRP coating - 12 pairs of lashing rings welded in outer frame (8 pairs RUD 8 t – 6 pairs in the lowered bed as well as one pair each on the gooseneck and at the front of the rear aggregate – 2 pairs of 4 t lashing rings on gooseneck and rear aggregate) - 6 pairs of mushroom anchors in outer frame in the lowered bed - Storage box with lid in the lowered bed floor, front left and right Front Wall: - 25 mm aluminum hollow profiles raised up to the lower edge of the roof with integrated tarpaulin tensioning device Sliding Tarpaulins: - Tarpaulin curtains on both sides with integrated vertical and horizontal belts (approx. 600 mm spacing) and stainless steel tension locks - Adjustable tarp straps (overcentre) up to loading width 4,000 mm including tarpaulin extension with press studs and Velcro fastener - Tarp extension in driving direction: 300 mm, in height: 750 mm - Incl. eyelets for separate tarpaulin extension piece - 1 pair of vertical tarpaulin pockets approx. 1,000 mm long, positioned in the lowered bed at the front crank - With belt pockets Rear Wall: - Steel rear portal frame with side tarpaulin hook-in device - Aluminum double-wing door, 25 mm thick - Both door wings fully foldable with door holders - Each door wing with aluminum double-joint hinge and two recessed grip hollows Front Corner Posts: - Roof height, bolted to front side Central Posts: - 3 pairs of infinitely adjustable folding posts - Posts are movable along the entire length via trolley - Middle posts in the lowered bed also fixable at the rear platform Roof: - EDSCHA sliding roof (galvanized) with cross beams movable in both directions (stacked forward inside the cargo area) - Rear portal cross beam swivels away - PVC tarpaulin roof without customs closure - Manually operated hydraulic lifting roof on both sides, lift 450 mm - Movable lifting roof in positions front (9x50) and rear (9x50), can be driven at increased height - Including tarpaulin extension and apron at rear - Roof can be cranked out 900 mm at front wall Accessories: - Extendable warning signs (removable at front and rear, with socket) incl. position lights up to loading width 4,000 mm - Storage for 4 warning signs on inside of front wall, top right and left - 1 aluminum ladder with holder 2,500 mm long on front wall - 2 rows of self-securing aluminum slats - Metal mudguards with splash flaps - 1 overnight parking plate and 1 ADR plate on rear wall - BEKAMAX central lubrication system with pump and grease class 2 for approx. 35 lubrication points - Electrohydraul

Stanje: novo, lastna masa: 8.490 kg, največja dovoljena obremenitev: 40.510 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 8.490 kg, Oprema: ABS, Chassis: - Robust welded steel frame structure with front frame drop and flat loading platform with rear bevel, approx. 500x100 mm - Gooseneck height 200 mm with beveled corners - Gooseneck end with bevel approx. 500 x 100 mm (traction ribs on outer frame in the area behind rear bevel) - 2 kingpin positions with interchangeable 2" kingpin - Outer frame closed outwards as slotted rail for lashing with tie-down straps - Reinforced frame design / point load at center of gravity - Provisions for extendable deck wideners - With excavator trough (without cover), approx. 220 mm deep, 600 mm wide, starting after the 2nd axle to end of vehicle - 1 pair wheel recesses in front of the axle with steel covers (covers with Körapur coating), approx. 400 mm deep, plus 1 pair wheel recesses between the 1st and 2nd axle with steel covers - Underride protection = extended end plate - Hydraulic drop-down supports at rear Floor: - 35 mm larch timber floor with aluminum omega profiles Axles, Steering, and Tyres: - BPW air suspension axles, each rated at 10 t axle load, bellows diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - Lifting and lowering device, total lift approx. 200 mm - 2nd driving height via ball valve +50mm - 1st axle lift axle (wired through EBS), fully automatic actuation with manual emergency actuation via button on trailer - 3rd axle as friction-steered trailing axle with electric and mechanical locking - 12 steel disc wheels, 10-hole, hub-centered - 12 tyres 245/70 R 17.5 143/141J, tubeless - Incl. tyre pressure monitoring system Braking System: - Dual-line brake system with EBS-E including RSS - EBS (WABCO 4S3M) - Spring-loaded parking brake - Pneumatic connection yellow/red Paintwork: - Steel shot blasting, spray galvanising of chassis and primer - Painting of chassis/wheel hubs/outer frame in DB 7350 Novagrau Accessories: - Removable side and rear boards on the gooseneck, approx. 400 mm high - Spare wheel holder - Side aluminum underrun protection - 4 wheel chocks - Steel fenders with Clear-Pass - Long license plate holder in end plate - 1 removable ECE plate at the rear - 11 pairs ZK modules 10t lateral: - 2x on the gooseneck - 9x on the loading platform - Without rear towing eyes - Extendable warning signs including 3 position lamps each, front at landing legs and rear in front of end plate, steplessly extendable up to 4,500 mm load width Gbedpfxowu A Slj Ab Ijn - 4 insertable sockets for warning signs in stake pockets on loading platform - 6 pairs stake pockets along sides for 100x50 mm stakes - 2 cross rows of stake pockets for 100x50 mm stakes on the gooseneck from outside frame to main frame (1 before and 1 after kingpin positions) - 3 cross rows of stake pockets for 100x50 mm stakes on loading platform from outer frame to main frame (1 in front section, 1 before 1st axle, 1 after 3rd axle) - 2 pairs steel plates on loading platform for container locks to accept 1x 20ft container - Rubber skirt mounted on underrun protection - Preparation (cable routing for NATO cable and hole pattern for subsequent mounting of NATO socket at front of end plate and bracket on vehicle) for optional retrofit of electrohydraulic power unit at right rear for potential operation of access ramps - Mechanical 24-ton stabiliser landing gear with single-sided operation and compensating shaft Optional: Trailer available with aluminum folding ramps.

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 12/2012, skupna dolžina: 13.860 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75R17.5, medosna razdalja: 11.250 mm, barva: črn, Leto izdelave: 2012, 400 cm extendable. 3 x steering axle. Remote steering. Loading bed: 565 cm + 400 cm. Loading height: 45 cm. = Further information = Axle configuration Tyre size: 235/75R17.5 Brakes: Drum brakes Suspension: Air suspension Gsdpfxewypate Ab Isbn Rear axle 1: Twin tyres; Steered; Tyre tread left inside: 30%; Tyre tread left outside: 50%; Tyre tread right inside: 30%; Tyre tread right outside: 50% Rear axle 2: Twin tyres; Steered; Tyre tread left inside: 40%; Tyre tread left outside: 40%; Tyre tread right inside: 40%; Tyre tread right outside: 40% Rear axle 3: Twin tyres; Tyre tread left inside: 30%; Tyre tread left outside: 40%; Tyre tread right inside: 30%; Tyre tread right outside: 40% Weights Tare weight: 13,320 kg Payload: 34,680 kg Gross vehicle weight: 48,000 kg Identification Type number: MPG 3 / EXTENDABLE / LOW BED / 3 = Company information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-EN), Wouter Greutink (NL-DE-EN-ES-IT), Govorim po russki. We make every effort to provide correct information, but no rights can be derived from the information provided.

Stanje: rabljeno, barva: rdeča, Leto izdelave: 2017, Meusburger MTS-3 Godpfx Asy Dvi Aeb Isbn Baujahr: 2017. 10 t BPW-Achsen. Max. Gesamtgewicht: 38.500 kg. EBS, ABS, ALB. Hydraulik vom Anhänger funktioniert auf NATO-Anschluss. Geschlitzter Boden. Hydraulische Brücke vom Boden zum Schwanenhals: - Länge: 3.450 mm. Seilwinde. Hydraulisch ausfahrbare Rampe. Luftfederung. 3. Achse nachlauflenkend (Nachlaufgelenkte Achse). Abmessungen: Schwanenhals: L: 3.370 mm. B: 2.550 mm. H: 1.300 mm. Sattelhöhe: 1.150 mm. Ladefläche: L: 7.100 + 2.750 mm. B: 2.550 mm. H: 900 mm. Bereifung: 235/75R17,5 ca. 50 % Profil. Deutscher Auflieger! ID-Nr.: 528 Die Allgemeinen Geschäftsbedingungen der Firma Heinhuis gelten für sämtliche Anzeigen, Angebote und Kostenvoranschläge von Heinhuis sowie für sämtliche von Heinhuis abgeschlossenen Verträge und den ihnen vorausgehenden Verhandlungen. Mit jeder Form der Reaktion erklären Sie sich mit der Geltung der Allgemeinen Geschäftsbedingungen der Firma Heinhuis einverstanden und bestätigen, dass Sie von diesen Kenntnis genommen haben. Unsere Preise sind Netto-Exportpreise. = Weitere Informationen = Baujahr: 2017 zGG: 38.500 kg Preis: Auf Anfrage = Firmeninformationen = Für weitere Informationen: WhatsApp:

Stanje: dober (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 02/2004, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.490 mm, višina nakladalnega prostora: 2.620 mm, skupna dolžina: 13.900 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65/22.5, medosna razdalja: 9.310 mm, barva: rdeča, Leto izdelave: 2004, Oprema: ABS, Konfiguracija osi Dimenzija pnevmatik: 385/65/22.5 Zavore: bobnaste zavore Vzmetenje: zračno vzmetenje Gbjdpfew S Hp Ujx Ab Ion Zadnja os 1: Največja osna obremenitev: 9.000 kg; Profil pnevmatike levo: 30%; Profil pnevmatike desno: 30% Zadnja os 2: Največja osna obremenitev: 9.000 kg; Profil pnevmatike levo: 20%; Profil pnevmatike desno: 20% Zadnja os 3: Največja osna obremenitev: 9.000 kg; Profil pnevmatike levo: 30%; Profil pnevmatike desno: 30% Teže Lastna masa: 8.330 kg Nosilnost: 31.170 kg Skupna dovoljena masa: 39.500 kg Stanje Tehnično stanje: dobro Vizualno stanje: dobro Dodatne informacije Za več informacij kontaktirajte Bas Wolfs ali Bas Wolfs.

Stanje: rabljeno, barva: zelen, Leto izdelave: 2017, Meusburger MTS-4. Leto proizvodnje: 2017. BPW osovine, 8 tona. Maksimalna dozvoljena masa: 50.000 kg. Opteretivost na selište: 18.000 kg. Produžava se za 4 metra. EBS, ABS, ALB sistemi. Twistlocks. Vazdušno ogibljenje. Treća i četvrta osovina su upravljačke (nachlaufachsen). Pocinkovan. Dimenzije: Dužina: 3950 mm Širina: 2550 mm Visina: 1100 mm Visina selišta: 1000 mm Pod: Dužina: 9600 mm Širina: 2550 mm Visina: 800 mm Gume: 205/65R17,5, 70% profil. Mega – Lowdeck! ID broj: 466. Opšti uslovi i odredbe Heinhuis-a primenjuju se na sve oglase, ponude i predračune Heinhuis-a, na sve ugovore zaključene sa Heinhuis-om i na pregovore koji im prethode. Odgovorom u bilo kom obliku prihvatate primenu opštih uslova i odredbi Heinhuis-a i izjavljujete da ste ih pročitali. Naše cene su neto izvoz cene. = Dodatne informacije = Godina proizvodnje: 2017 Dozvoljena ukupna masa: 50.000 kg Produživi okvir: Da = Informacije o firmi = Za više informacija: Godpfxey Ay Uyj Ab Iobn WhatsApp:

Stanje: rabljeno, barva: rdeča, Leto izdelave: 2018, Meusburger MTS-3. Baujahr: 2018. 10-t-BPW-Achsen. Eigengewicht: 11.700 kg. Nutzlast: 36.300 kg. Max. Gesamtgewicht: 48.000 kg. Sattellast: 18.000 kg. 1. Achse Liftachse. 3. Achse Nachlaufachse (lenkbar). Luftfederung. Gelochter Boden. Gbsdpfx Asy Ayyvsb Ien Seilwinde. Hydraulische Brücke zwischen Boden und Schwanenhals. Ladeflächenlänge: 3.420 mm. Hydraulik arbeitet über NATO-Elektrik vom Zugfahrzeug. 2-Punkt-Heckabstützungen hydraulisch. 2-Wege-Hydraulikrampen: - Hydraulische Verstellung von links nach rechts. - Länge: 4.600 mm. Werkzeugkästen. Abmessungen: Schwanenhals: L: 3.750 mm. B: 2.550 mm. H: 1.440 mm. Sattelhöhe: 1.200 mm. Ladefläche: L: 9.730 mm. B: 2.550 mm. H: 900 - 950 mm. Bereifung: 70 %. Deutscher Auflieger! ID-Nr.: 408. Es gelten die Allgemeinen Geschäftsbedingungen der Firma Heinhuis für alle Inserate, Angebote und Kostenvoranschläge, alle von Heinhuis geschlossenen Vereinbarungen sowie die ihnen vorausgehenden Verhandlungen. Mit jeglicher Form der Reaktion erkennen Sie die Anwendbarkeit dieser Bedingungen an und bestätigen, dass Sie diese zur Kenntnis genommen haben. Unsere Preise sind Netto-Exportpreise. = Weitere Informationen = Baujahr: 2018 Leergewicht: 11.700 kg Nutzlast: 36.300 kg zul. Gesamtgewicht: 48.000 kg = Firmeninformationen = Für weitere Informationen: WhatsApp:

Stanje: rabljeno, lastna masa: 8.900 kg, največja dovoljena obremenitev: 40.100 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2025, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: siv, Leto izdelave: 2025, Oprema: ABS, For every used semi-trailer, you will receive a current and comprehensive inspection and functionality report. Chassis: -Robust steel frame welded construction with front frame drop and flat cargo bed with rear taper approx. 500x100 mm -Frame neck 200 mm with beveled front corners -Tapered rear end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in rear taper area) -2 king pin positions with replaceable 2” king pin -Outer frame closed to the outside as hole profile outer frame -Cargo bed with extendable central frame, extendable by approx. 2,000 mm, lockable pneumatically every 500 mm -Frame before and after extension with 80x80 mm step -Reinforced frame design / point load support in retracted position at center of gravity -Without extendable widening sections in the cargo bed, but prepared for retrofitting (= guide tubes welded into the frame) -With excavator recess (without cover), depth approx. 220 mm, width approx. 600 mm, starting after 2nd axle to rear end of vehicle -1 pair of wheel recesses between 1st and 2nd axles with steel covers (covers with Körapur coating), depth approx. 400 mm -Underrun protection = extended rear plate -Drop support legs at rear Floor: -35 mm larch wood floor with aluminum omega profiles Axles, Steering and Tires: -BPW air suspension axles, each with 10 t axle load, air bellows diameter 360 mm -S-cam brakes 300/200 mm, asbestos-free brake pads -Automatic slack adjuster -Lift-and-lower system with total lift approx. 200 mm -2nd ride height via ball valve +50mm -1st axle is a lift axle (wired via EBS), confirmation fully automatic with mechanical emergency activation via push button on the trailer -3rd axle is a friction-steered trailing axle with electric and mechanical lock -12 steel disc wheels, 10-hole, centrally offset -12 tires 245/70 R 17.5 143/141J, tubeless Gbsdpfoywv Ixjx Ab Ijn -Including tire pressure monitoring Accessories: -Removable drop sides and rear wall on the gooseneck, approx. 400 mm high -Spare wheel holder -Lateral aluminum side underrun protection -4 wheel chocks with bracket -Elongated license plate holder in the rear plate -1 plug-in ECE sign at rear -11 pairs of 10t lashing modules at the sides: 2x on gooseneck 2x on cargo bed in front of the extension 7x after extension -Without rear towing eyes -Extendable warning boards incl. 3 position lights each, front at landing gear and rear in front of rear plate, steplessly extendable to a load width of 4,500 mm -4 holders for warning boards, insertable in stake pockets on the cargo bed -6 pairs of side stake pockets for plug-in stakes 100x50 mm -2 rows of transverse stake pockets for plug-in stakes 100x50 mm on gooseneck from outer frame inward to main frame (1x before and 1x after kingpin positions) -3 rows of transverse stake pockets for plug-in stakes 100x50 mm on cargo bed from outer frame inward to main frame (1x before extension, 1x after extension, and 1x after 3rd axle) -2 pairs of steel plates in the cargo bed for container locks to accommodate 1x 20ft container -Rubber apron mounted on underrun protection -Prepared (= cable routing for NATO cable and hole pattern for retrofit mounting of NATO socket in front section of rear plate as well as bracket on vehicle) for retrofitting electrohydraulic power pack on right rear in driving direction for potential operation of loading ramps Optional: the trailer is available with aluminum loading ramps

Stanje: rabljeno, lastna masa: 12.450 kg, največja dovoljena obremenitev: 32.550 kg, skupna masa: 45.000 kg, prva registracija: 11/2008, dolžina tovornega prostora: 9.730 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, barva: oranžna, obratovalna teža: 12.450 kg, Very well-maintained vehicle from first owner Meusburger MTS 3 - 45T Three-axle low-bed trailer with drive-over loading ramps Heavy-duty transport Model MTS 3 Gsdjwb Sh Ajpfx Ab Isbn Gross vehicle weight - 45,000 kg Payload - 32,550 kg Length - 13,900 mm Width - 2,500 mm Air suspension