Müller-Mitteltal Pt 30 Profi Verzinkt Luftfed Liftachse nakup rabljenega (15.576)

Stanje: novo, največja dovoljena obremenitev: 14.650 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, Leto izdelave: 2024, RS-T 18,0 / 018: ----Zavore: * Wabco EBS-E (elektronski zavorni sistem) * Naprava za hitro sprostitev zavor za vzmetne akumulatorje * Kolutne zavore ----Osi: * 2 x 10 ton SAF osi ----Vzmetenje: * Zračno vzmetenje z avtomatskim spuščanjem pri sprostitvi zavor ----Povezovalna prikolica: * Povezovalna prikolica dolžine 2.300 mm s 40 mm priključkom in nastavitvijo višine s pomočjo vzmetne žice in vijačne gredi ----Elektrika / Osvetljava: * Sistem za nadzor tlaka v pnevmatikah (RDÜ) * LED zadnje luči s zaščitno streho * 2 x 7-polni električni vtiči ----Splošni dodatni deli: * Plastična orodjarna omara na desni strani, zaprt plastični blatnik * Zaprt bočni zaščitni element, ki služi kot oglaševalna površina * Podvozni zaščitni element z 2 blažilniki * Zložljiva opozorilna tabla na zadnji strani za odlaganje odpadkov ----Površina za kontejner: * Dolžina valjčne tirnice približno 6.950 mm * Valjčni kontejner je pritrjen s pnevmatično štirikratno objemko * Na sprednji strani sta 2 vstavljiva opora za kontejner z 2 dodatnima položajema za vstavljanje * Primeren za kontejnerje dolžine 5.000 – 7.000 mm ----Višina vozila: * brez obremenitve približno 1.165 mm ----Barvanje: * Šasi vroče pocinkano * Zračni rezervoar, osi, vrtljivi obroč in povezovalna prikolica ----Informacije: Hedjl Tqkwjpfx Akbofl * --Tehnično je možna dovoljena skupna masa 20.000 kg-- * Novo vozilo z garancijo proizvajalca * Pridržane napake in možnost predčasne prodaje ----Dobavni rok: * Na voljo takoj, dobava iz Egestorfa

Stanje: novo, največja dovoljena obremenitev: 14.650 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, Leto izdelave: 2024, RS-T 18,0 / 018: ----Zavore: * Wabco EBS-E (električni zavorni sistem) * Naprava za hitro sproščanje zavor za vzmetne zavorne cilindre * Kolutne zavore ----Osi: * 2 x 10 ton, osi SAF Hfodpfx Akel Tpy Hobel ----Vzmetenje: * Zračno vzmetenje z avtomatskim spuščanjem ob sprostitvi zavor ----Vlečna priprava: * Vlečna priprava dolžine 2.300 mm z vlečno osjo 40 mm in nastavitvijo višine preko vzmetne žice in vretena ----Elektrika / Osvetlitev: * Sistem za nadzor tlaka v pnevmatikah (RDÜ) * LED zadnje luči s zaščitno streho * 2 x 7-polni vtič za priklop električnega sistema ----Splošni dodatni deli: * Plastični orodjarni predal na desni strani, zaprt plastični odbijač * Stranski zaprt zaščitni element za prikazovanje reklam * Zaščita pred podvozjem z 2 odbojniki * Zložljiv znak "A" na zadnji strani za odvoz odpadkov ----Površina za kontejnerje: * Dolžina valjčne tirnice približno 6.950 mm * Kontejner se pritrdi s pnevmatsko 4-točkovno zaporo * Na sprednji strani sta 2 vtični nosilci za kontejnerje z 2 dodatnima vtičnicama * Primerno za kontejnerje dolžine 5.000 do 7.000 mm ----Višina vozila: * Brez tovora približno 1.165 mm ----Barvanje: * Šasi prevlečeno s prevleko proti rji * Zračna posoda, osi, vrtilni obroč in vlečna priprava ----Informacije: * --Tehnično je možna največja dovoljena masa 20.000 kg-- * Novo vozilo z garancijo proizvajalca * Pridržujemo si pravico do sprememb in napak * Prodaja je možna tudi medtem ----Dobavni rok: * Takoj na voljo iz Egestorfa

Stanje: novo, največja dovoljena obremenitev: 23.940 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profi 30.0 ----Braking System: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Parabolic springs with mechanical rear axle equalization ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment via draw spring and turnbuckle ----Lighting / Electrics: * RDÜ tire pressure monitoring * Multi-voltage system * LED tail lights 12 / 24 V * Rear removable rotating beacon * 15-pin power connector ----General Attachments: Hfedpfxjl Th I As Akbel * Lateral underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front: closed plastic mudguards; Rear: straight galvanized steel skirts, each with splash guards * Tool box made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanized) for tool box in the bogie platform * Four stake pockets per side (stakes not included), also suitable for lashing ----Load Securing (La-Si package consists of): * 2 lashing eyes (6.4 t) front left & right on main frame of the bogie platform * 6 pairs of UVV-certified lashing rings, foldable and lowerable, loadable in all directions, recessed into the outer frame * Corner load capacity 13.4 t, otherwise 10 t ----Widening: * 6 pairs of mechanical fold-out outriggers for max. overall width of 3 meters (except at the sloped rear) * Widening planks stored in the center of the loading area ----Ramps: * Hot-dip galvanized one-piece hydraulic drive-on ramps (approx. 3,000 x 720 mm), mechanically laterally adjustable * 4-way valve block for retrofit hydraulic lateral ramp shift ----Loading Area: * Over turntable: approx. 1,960 x 2,520 mm & unladen height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unladen height approx. 910 mm (including 860 mm drive-on slope) ----Tyres: * 235/75 R 17.5 twin tyres ----Unladen weight: * Approx. 5,980 kg unladen weight ----Paintwork: * Chassis, bogie, drawbar and drive-on ramps hot-dip galvanized * Axles, springs, air tanks etc. painted black ----Info: * Permissible gross weight technically up to 30,000 kg * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: Immediately available from Egestorf

Stanje: rabljeno, konfiguracija osi: 2 osi, skupna širina: 25.000 mm, skupna višina: 40.000 mm, Leto izdelave: 2014, Oprema: ABS, Za vprašanja v zvezi z vozilom je vam na voljo gospod Seidel (po telefonu). MÜLLER MITTELTAL SF32BM/BT betonska polprikolica Nadgradnja: Liebherr HTM 1004 10m³, osi BPW, bobnaste zavore, vzmetni akumulator, Wabco ABS, 1. os dvižna, zračno vzmetenje, dovoljena skupna masa: 32.000 kg, lastna masa: 6.510 kg, nosilnost: 25.490 kg, profil pnevmatik: 1. os 14-15mm, 2. os 10mm Po želji vam pripravimo ponudbo za leasing ali financiranje. Gospod Seidel vas z veseljem vodi po telefonu. Več informacij najdete na naši spletni strani. Hfedpfx Aoyfu Sdokbsl ... Napake, spremembe in vmesna prodaja pridržane!!! = Dodatne informacije = Dovoljena skupna masa: 32.000 kg Za dodatne informacije se obrnite na gospoda Tobiasa Eberta.

Stanje: novo, največja dovoljena obremenitev: 8.870 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 11.9: ----Braking System: * Electronic braking system (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: Hodpfxjl Thy Ro Akbofl * 2 x 5.5 t Gigant axle assemblies ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, approx. 300 mm * 40 mm flange drawbar eye ----General Attachments: * Jost mechanical landing gear, front * External, hot-dip galvanized folding supports, rear * Side underrun protection * Plastic quarter mudguards * Plastic toolbox, front right, mounted on front wall outside ----Electrics / Lighting: * Tire pressure monitoring system (TPMS) * 15-pin power connector * LED tail lights ----Loading Platform: * 50 mm softwood floor * 20'' container locks mounted at front and rear * Bolted smooth steel front wall * Drop sides, steel, trapezoidal profile, drop-down with drop-side lifting springs * Hot-dip galvanized, bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing brackets every 600 mm (5 lashing rings fitted each side) * 1 x 6.3 t lashing ring fitted in each corner front and rear * Various holes in front and rear transverse beams for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Rear storage compartment integrated in the chassis below the loading area ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, front wall, and rear wall * Drop side color in RAL 9010 pure white * Side panels can be painted in a RAL color at extra cost ----Info: * New vehicle without registration * Subject to prior sale and errors excepted ----Delivery Time: * Available immediately from Egestorf

Stanje: novo, največja dovoljena obremenitev: 30.740 kg, skupna masa: 40.000 kg, konfiguracija osi: > 3 osi, Leto izdelave: 2026, * T 4: * Wabco EBS-E (electronic braking system) Hfedsl Tik Nopfx Akbjl * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lifting/lowering system and RtR valve * Smard board for payload weighing * Warning sign kits, front and rear * Reflective contour tape on the sides and rear * Removable rotating beacon (rear) * LED lighting * Straight drawbar with 50 mm towing eye and infinitely adjustable height * Tool box made of powder-coated steel sheet and basket-type spare wheel holder, mounted right side * Front: closed single plastic mudguard * Rear: straight steel mudguards, each with spray suppression * Side underrun protection * Bogie platform extension by 520 mm with 45° corners, 3 integrated lockable storage compartments with lids * Chassis made of high-strength fine-grained steel * 50 mm softwood floor over bogie platform, 60 mm softwood on low-bed platform * Outer rails on ramps made of hardwood * 4 stake pockets per side (no stakes included); 2 t lashing possible at each * Load securing package: 2 lashing eyes (6.4 t) front left/right on main frame of bogie platform * 2 pairs of lashing rings (13.4 t) on outer frame front/rear per side; 4 pairs of lashing rings (10 t), swing-out and lowerable per side (front/rear) * All lashing points loadable in all directions and recessed into outer frame * 2 pairs of lashing rings (6.4 t) in excavator arm rest area * 8 pairs of galvanized folding outriggers for 3 m overall width (not at rear slope) * Extension planks stored left side in a storage box * Excavator arm rest above rear axle to end of rear slope, approx. 2,100 x 740 x 190 mm * Rear mechanical fall supports * Hydraulic folding ramps with hydraulically adjustable ramp tip, approx. 4,650 x 720 mm, incl. hydraulic lateral ramp adjustment & load-holding valve * Loading area above turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loading height loaded approx. 890 mm, +/-20 mm (incl. 860 mm approach slope) * Flow divider installed * Chassis, bogie, ramps, outriggers and mechanical fall supports hot-dip galvanized * Axles, drawbar, air reservoir and turntable in black finish * Tires: 235/75 R 17.5 * New vehicle, no initial registration, manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf, A7

Stanje: novo, največja dovoljena obremenitev: 8.780 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2024, * KA-TA-R 11.9 Masterline: ----Brakes: Hfodopk D Dmepfx Akbsl * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Eye: * Height-adjustable hot-dip galvanized drawbar, adjustable by 300 mm, with 40 mm flange eye ----General Attachments: * Jost mechanical landing gear (front) * Two rear mechanical hot-dip galvanized fold-down supports * Tool box made of galvanized steel sheet, mounted right side * Plastic quarter mudguards ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin electrical connector * Bolted underride guard with LED tail lights ----Tipping Platform: * Net hooks on the sides and rear in the central locking mounts as well as 3 external on the front wall * Hot-dip galvanized chassis * Steel pallet 3-way tipper body, fully galvanized * Continuous, drop-side walls with spring-assisted board wall lifters, can be folded down—no center stanchions * Tailgate foldable and pendulum-mounted via manual central locking * Hot-dip galvanized bolted rear stanchion ----Load Securing: * 1 recessed and foldable 5 t lashing ring in each corner, as well as 4 recessed and foldable 3 t lashing rings on each side in the outer frame * 4 mm steel sheet floor, rear mount rail for ramps ----Ramps: * 1 pair aluminum loading ramps approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading area at the rear, integrated into the chassis ----Tires: * 235/75 R 17.5 tires ----Paint Finish: * Axles, springs, air tanks, drawbar and landing gear painted in black * Vehicle is hot-dip galvanized ----Notes: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Available immediately from Egestorf on the A7

Stanje: novo, največja dovoljena obremenitev: 8.780 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2024, * KA-TA-R 11.9 Masterline: ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Eye: * Height-adjustable hot-dip galvanized drawbar, adjustable by 300 mm, with 40 mm flange eye Hedpfjpk D D Uex Akbjfl ----General Attachments: * Jost mechanical landing gear (front) * Two rear mechanical hot-dip galvanized fold-down supports * Tool box made of galvanized steel sheet, mounted right side * Plastic quarter mudguards ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin electrical connector * Bolted underride guard with LED tail lights ----Tipping Platform: * Net hooks on the sides and rear in the central locking mounts as well as 3 external on the front wall * Hot-dip galvanized chassis * Steel pallet 3-way tipper body, fully galvanized * Continuous, drop-side walls with spring-assisted board wall lifters, can be folded down—no center stanchions * Tailgate foldable and pendulum-mounted via manual central locking * Hot-dip galvanized bolted rear stanchion ----Load Securing: * 1 recessed and foldable 5 t lashing ring in each corner, as well as 4 recessed and foldable 3 t lashing rings on each side in the outer frame * 4 mm steel sheet floor, rear mount rail for ramps ----Ramps: * 1 pair aluminum loading ramps approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading area at the rear, integrated into the chassis ----Tires: * 235/75 R 17.5 tires ----Paint Finish: * Axles, springs, air tanks, drawbar and landing gear painted in black * Vehicle is hot-dip galvanized ----Notes: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Available immediately from Egestorf on the A7

Stanje: rabljeno, največja dovoljena obremenitev: 31.000 kg, skupna masa: 40.000 kg, konfiguracija osi: > 3 osi, prva registracija: 07/2024, dolžina tovornega prostora: 9.290 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 950 mm, * PT 40.0 Profi ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 4 x 11 tonne Gigant axles ----Suspension: * Air suspension with lifting and lowering system and RtR valve ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment ----Lighting / Electrical: * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12 / 24 V * LED rotating beacon (removable) at the rear * 2 LED reversing lights (activated via reverse gear) ----General Attachments: * Manometer (pressure gauge) for load weight determination (axles separated into 2 air suspension circuits) * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning boards, front and rear * Front axle plastic mudguards with spray protection * Rear axle straight galvanized steel side skirts with spray protection * Reflective contour tape on the sides and rear * Tool box, black powder-coated galvanized steel, approx. 1,000 mm wide, 600 mm deep, 300 mm high ----Low Loader Platform: Hfodpfjl Tnu Ajx Akbjl * Front extension in front of the turntable platform, approx. 490 mm long with 45° corners * ROBOT-WELDED anti-slip coating on the steel plate of the turntable platform * Hardwood flooring on the running areas of the low-bed platform ----Load Securing (La-Si package consists of): * 1 x 13.4 t UVV lashing ring left & right in front of the headboard carrier * 4 fixing holes each side in the turntable platform, each with 2 t lashing capacity * 1 pair of lashing rings (13.4 t), suspended at the rear left & right in front of the rear carrier * 4 pairs of UVV lashing rings (10 t) per side, pivotable and lowerable, loadable in all directions and recessed into the external frame * 3 stake pockets per side, each offering 2 t lashing capability simultaneously ----Widening Package: * Hot-dip galvanized mechanical folding outriggers for 3 m overall width (not in the rear slope) * Beam bracket for widenings under the chassis on the left, longitudinally mounted ----Excavator Arm Rest: * Excavator arm rest above the rear axle up to the end cross member, approx. 2,100 mm long and approx. 190 mm deep * 2 pairs of 6.4 t lashing rings per side in the excavator arm rest ----Ramps: * Hydraulically operated one-piece drive-on ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * Outer planks of the ramps made from hardwood * Steel construction prepared for 6-way control valve ----Loading Height: * Loading edge unladen approx. 950 mm +/- 20 mm ----Tyres: * Tyres 235/75 R 17.5 ----Coating/Paintwork: * Chassis, turntable, folding outriggers, mechanical supports, and drive-on ramps hot-dip galvanized * --Axles, air tanks, drawbar painted black-- ----Infos: * Vehicle has a daily registration as of 07/2024, due to the missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Available immediately from Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.870 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 11.9: ----Braking System: * Electronic braking system (EBS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle units ----Suspension: * Parabolic springs with balancing unit ----Drawbar / Flange Eye: * Drawbar height adjustable by approx. 300 mm * 40 mm flange towing eye ----General Attachments: * Jost mechanical landing gear at front * Bolt-on, hot-dip galvanized folding supports at rear (external) * Side underrun protection * Plastic quarter mudguards * Plastic toolbox on front right, externally mounted on front wall ----Electrics / Lighting: * Tyre pressure monitoring system (TPMS) * 15-pin power connector * LED tail lights ----Load Area: * 50 mm softwood floor * 20" container locks mounted at front and rear * Bolted bulkhead made of smooth steel sheet * Drop sides made of trapezoidal-profile steel sheet, foldable with sideboard spring lifter * Hot-dip galvanized bolted rear stanchions ----Load Securing: * Perforated outer rail, edged at approx. 45°, with lashing capacity of 2 t every 480 mm * Optional 3 t folding lashing brackets every 600 mm (five lashing rings mounted per side) * One 6.3 t lashing ring in each corner, front and rear * Various bores in front and rear crossmembers for 1.2 t lashing points Hsdpfx Akjl Tilxsbefl ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Rear storage compartment recessed into the chassis frame under the loading area ----Paintwork: * Hot-dip galvanized chassis, drawbar, bulkhead, and rear wall * Sideboard colour in RAL 9010 pure white * Painting of side walls in a RAL colour of choice available at extra charge ----Information: * New vehicle, not registered * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf

Stanje: novo, največja dovoljena obremenitev: 30.740 kg, skupna masa: 40.000 kg, konfiguracija osi: > 3 osi, Leto izdelave: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift/lowering system and RtR valve * Smard board for load weight determination * Warning sign packages front & rear * Reflective contour marking tapes on sides and rear * Rotating beacon (removable) at rear * LED lights * Straight drawbar with 50 mm towing eye and continuously adjustable height * Tool box made of powder-coated sheet steel and spare wheel holder in basket design, right-hand side * Closed single plastic mudguards at front * Straight rear steel splash guards, each with spray suppression * Side underrun protection * Turntable platform front extension by 520 mm with 45° corners and 3 flush storage compartments with lids, lockable * Chassis made of high-strength fine-grained steel * Decking above turntable platform: 50 mm softwood, in low-bed platform: 60 mm softwood * Outer planks of access ramps: hardwood * Each side features 4 stake pockets (stakes not included), with simultaneous 2 t lashing points * Lashing package includes: 2 lashing rings 6.4 t, front left and right on main frame of turntable platform * On sides, front & rear, 2 pairs of 13.4 t lashing rings on outer frame; sides each with 4 pairs of 10 t lashing rings, pivoting & lowerable * Loadable in all directions, recessed in the outer frame * 2 pairs of 6.4 t lashing rings on the excavator stick rest area * 8 pairs of galvanized folding outriggers for 3 m overall width (not in the rear slope) * Extension planks stored left side in a stowage compartment * Excavator stick rest above rear axle to rear slope approx. 2,100 x 740 x 190 mm * Mechanical drop supports, rear * Hydraulic folding ramps with hydraulic tip section approx. 4,650 x 720 mm including lateral hydraulic ramp shift & load holding valve * Load area over turntable: approx. 2,990 x 2,520 mm * Rear load area: approx. 6,780 x 2,520 mm * Loading height loaded: approx. 890 mm, +/- 20 mm (incl. 860 mm drive-on slope) * Flow divider installed * Chassis, turntable, ramps, outrigger arms, and mechanical rear supports hot-dip galvanized * Axles, drawbar, air reservoir, and turntable painted in a black tone * Tires: 235/75 R 17.5 * New vehicle, not previously registered, with manufacturer warranty * Subject to errors and prior sale * Immediately available ex Egestorf on the A7 Hodpfx Ajl Tphrokbsfl

Stanje: novo, največja dovoljena obremenitev: 23.940 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profi 30.0 ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Parabolic springs with mechanical rear axle compensation ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment via drawbar spring & turnbuckle ----Lighting / Electrics: * TPMS Tire Pressure Monitoring System * Multi-voltage system * LED tail lights 12 / 24 V * Rear removable warning beacon * 15-pin power connector ----General Equipment: * Side underrun protection * Rear swing-down support legs on chassis frame * Mechanically adjustable warning panel kits front and rear * VA closed plastic mudguards in front and straight galvanized steel skirts at the rear, each with spray protection * Tool box made of galvanized steel sheet - black powder-coated - approx. 650 x 300 x 600 mm * Folding lid (hot-dip galvanized) for the toolbox in the turntable platform * Four stake pockets per side (stakes not included), also with lashing function ----Load Securing (La-Si package consisting of): * 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform * 6 pairs of UVV folding and retractable lashing rings, loadable in all directions and countersunk into the outer frame * 13.4 t at corners, 10 t otherwise Hedpfx Akel Th Nnobefl ----Widening: * 6 pairs of manual folding outrigger arms for 3 m overall width (not on the sloped rear section) * Widening boards stowed in the center of the loading area ----Ramps: * Hot-dip galvanized one-piece hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-way hydraulic control unit pre-installed for optional hydraulic side shift of ramps ----Loading Area: * Over turntable: approx. 1,960 x 2,520 mm & unladen height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unladen height approx. 910 mm (incl. 860 mm entry incline) ----Tyres: * 235/75 R 17.5 twin tyres ----Unladen weight: * Approx. 5,980 kg unladen weight ----Finish: * Chassis, turntable, drawbar and loading ramps hot-dip galvanized * Axles, springs, air tanks etc. painted black ----Information: * Permissible total weight of 30,000 kg technically possible * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Immediately available ex stock Egestorf

Stanje: rabljeno, lastna masa: 3.210 kg, največja dovoljena obremenitev: 8.690 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, prva registracija: 05/2021, naslednji pregled (TÜV): 06/2026, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.430 mm, višina nakladalnega prostora: 500 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17.5, Leto izdelave: 2021, Oprema: ABS, Nemško vozilo MASTERLINE Müller-Mitteltal KA-TA-R 11,9 trosmerni kiper sa rampama ispod utovarene Godina prve registracije: 05/2021 pocinkovan Dozvoljena ukupna masa: 11.900 kg Sopstvena masa: 3.210 kg Nosivost: 8.690 kg Dimenzije pneumatika: 235/75 R 17,5 Tandem osovina manja od 1 m Vučna ruda je neprekidno podesiva po visini, toplo pocinkovana, vučna kuka 40 mm Ram pocinkovan BPW osovine Visina poda: 0,93 m Dodatne usluge dostupne! Izvozne tablice (crvene / 30 dana) Nemačka Kratkoročne tablice (žute / 5 dana) Nemačka Moguća organizacija austrijskih prevoznih tablica Isporuka vozila (uz nadoknadu) Podaci dati na internetu su nezahtevne informacije. Ne predstavljaju zagarantovana svojstva. Prodavac ne preuzima odgovornost za greške, tipografske greške i greške u prenosu podataka. Hfsdsyw N Npepfx Akbel Prodaja uz mogućnost prethodne prodaje. Prodaja isključivo privrednim subjektima. Važe isključivo naši Opšti uslovi poslovanja.

Stanje: rabljeno, lastna masa: 3.210 kg, največja dovoljena obremenitev: 8.690 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, prva registracija: 05/2021, naslednji pregled (TÜV): 06/2026, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.430 mm, višina nakladalnega prostora: 500 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17.5, Leto izdelave: 2021, Oprema: ABS, Nemško vozilo MASTERLINE Müller-Mitteltal KA-TA-R 11,9 trosmerni kiper sa rampama ispod utovarene Godina prve registracije: 05/2021 pocinkovan Dozvoljena ukupna masa: 11.900 kg Sopstvena masa: 3.210 kg Nosivost: 8.690 kg Dimenzije pneumatika: 235/75 R 17,5 Tandem osovina manja od 1 m Vučna ruda je neprekidno podesiva po visini, toplo pocinkovana, vučna kuka 40 mm Ram pocinkovan BPW osovine Visina poda: 0,93 m Dodatne usluge dostupne! Izvozne tablice (crvene / 30 dana) Nemačka Kratkoročne tablice (žute / 5 dana) Nemačka Moguća organizacija austrijskih prevoznih tablica Isporuka vozila (uz nadoknadu) Hfedpfoyxbgcex Akbsl Podaci dati na internetu su nezahtevne informacije. Ne predstavljaju zagarantovana svojstva. Prodavac ne preuzima odgovornost za greške, tipografske greške i greške u prenosu podataka. Prodaja uz mogućnost prethodne prodaje. Prodaja isključivo privrednim subjektima. Važe isključivo naši Opšti uslovi poslovanja.

Stanje: rabljeno, največja dovoljena obremenitev: 23.180 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2019, dolžina tovornega prostora: 8.300 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 900 mm, skupna dolžina: 10.805 mm, skupna širina: 2.550 mm, Skupna masa: 24.000 kg / 30.000 kg Lastna masa: 6.820 kg Nosilnost: 17.180 kg / 23.180 kg Skupna dolžina: 10.805 mm Dolžina tovornega prostora: skupaj približno 8.300 mm / približno 6.500 mm za nizkopodvojno različico, vključno z zadnjim delom Širina: 2.550 mm Višina tovornega prostora: 900 mm Dodatne informacije: Hjdpfx Akozwkkrobjfl Niše za kolesa Nagibne plošče Stranske nagibne plošče, ki se premikajo vstran Rotacijska luč Opozorilne table spredaj in zadaj Dvojne pnevmatike Os BPW Plastična orodjarna omara Zložljiva zadnja opora Niša za bager, približno 2.400 mm x 800 mm Velik komplet pritrdilnih trakov Pritrdilne obroče na zunanjem okvirju Prostor za shranjevanje v ukrivljenem delu

Stanje: rabljeno, največja dovoljena obremenitev: 38.230 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2026, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Müller-Mitteltal prikolica z nizko ležečo ploščadjo z vdolbinami za kolesa TS 3 RM ML 30,0, 2 višini nakladanja in rampe * Povečanje nosilnosti sedelne prikolice od 12 t na 18 t, vključno z vgrajeno dvojno sedelno pripravo: Druga pozicija sedelne priprave 2", sedelna priprava do vključno 2.750 mm. Največji radij obračanja zadaj približno 2.400 mm v prostem prostoru (priporočljiv minimalni prosti prostor 150 mm). Največji radij obračanja naprej 1.480 mm oz. 1.570 mm z rezervnim kolesom. Opomba: Zadostno razdaljo do vlečne enote mora zagotoviti stranka. * Izpodbujevalne komponente za vdolbinami za kolesa spredaj in zadaj spodaj (globina 205 mm). 6 kosov, vključno s ploščami za vdolbine za kolesa zadaj. Držalo za plošče kot vstavni žepi v skladu s kodo 09.112, aluminijasta tlačna posoda za zračni sistem namesto jeklene posode * Nadzorna enota Smartboard, nameščena na prikolici kot informacijsko orodje z tlačnimi senzorji, izključno za prikaz skupne nosilnosti osi. Možnost prikaza na nadzorni enoti ali v tovornjaku preko sistema zračnega vzmetenja EBS (odvisno od proizvajalca tovornjaka) * ?SP-kombinirani paket: orodjna omara z 45° robovi iz pocinkane jeklene pločevine, dodatno prašno lakirana v barvi RAL 9006 belo-aluminijasto, na platformi prikolice Š=2.480 x V=500 mm z pokrovom, stranska vrata in poševni robovi. Vključno z aluminijastimi stranskimi stenami, ki se odpirajo proti platformi prikolice (višina 500 mm), aluminijasto zadnjo steno (višina 150 mm), aluminijaste bočne stene, pobarvane znotraj in zunaj v barvi RAL 9006 belo-aluminijasto. Vključno z zadnjimi oporniki, ki se odpirajo in odstranjujejo, pocinkani (brez zaključne barve). Vključno z vijačeno nadgradnjo. Dolžina čelne nosilke do poševnine 3.935 mm, največji radij obračanja spredaj, brez dodatnega kolesa, pri poševnem merjenju 2.450 mm oz. 2.750 mm, približno 1.750 oz. približno 1.480 mm. * 2 košti pritrdilnih naprav za kontejner, vgrajenih v čelno nosilko * 3 vstavni žepi pod platformo prikolice za shranjevanje aluminijastih rampt ali lesenih plošč za pokrivanje vdolbin za kolesa * Odpirajoči se izteg / izpodbujevalni drog (pocinkan) in lesene plošče za širitev, vključno (ne na zadnji poševnini), držalo za plošče na platformi prikolice (največja širina tovorja je 2.500 mm) * Druga LED-pozicijska luč na sprednji in zadnji strani varnostnega paketa (dvojna razsvetljava), samo v povezavi z varnostnim paketom * 2 LED-luči za vzvratno vožnjo na zadnji strani prikolice, vklopljeni z vzvratno prestavo (primerno za 12 V in 24 V), največ 2 dodatni luči * Vtičnica z 7 poli na zadnji strani, priključena za osvetlitev presežne širine vozila z zadnjo lučjo (58 R) in maso * Gumijasta prevleka na dostopni rampi na levi in desni strani (približno 860 mm dolžine), 190 07644, gumijasta trakov, na notranji plošči enodelne rampe * Centralni sistem mazanja, popolnoma avtomatski, s črpalko (24 V), rezervoarjem za maščobo in integriranim nadzorom prikolice, brez priključka na rampe (pri krmiljenju: vključno s priključkom razdelilnika na platformi prikolice), Opomba: Možno samo pri vlečnih vozilih z 24-voltno električno napravo! Med prodajo in napake so izrecno izključene! Hfedpfxey R Ipuj Akbel Prodaja samo v skladu z našimi splošnimi pogoji poslovanja. Pomembno opozorilo – pomembne informacije: Kljub natančni pregledu vseh podrobnosti v naši ponudbi se lahko zgodi, da se vključi napaka. Delno so te posledica napak pri prenosu podatkov v sistemih različnih ponudnikov platform. Zato želimo opozoriti, da

Stanje: novo, največja dovoljena obremenitev: 14.620 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, * RA-T 18,0 / 018: ----Zavore: * Wabco EBS-E (elektronski zavorni sistem) * Sistem za hitro sprostitev zavor za cilindr s pomnilnikom vzmeti * Diskovne zavore ----Osi: * 2 x 10 ton, široke osi BPW Hjdev Nulzjpfx Akbofl ----Vzmetenje: * Zračno vzmetenje (avtomatsko spuščanje ob sprostitvi zavor) ----Povezovalna naprava: * Povezovalna naprava, dolžina približno 2.300 mm, z 40 mm vtičnico in nastavitvijo višine s pomočjo vzmetne palice in zapornice ----Elektrika / Osvetlitev: * Sistem za nadzor tlaka v pnevmatikah (RDÜ) * 15-polni električni vtič * LED zadnje luči ----Splošni dodatni deli: * Plastična orodjarna škatla 450 x 470 mm, na desni strani * Omara za orodje, na strani, 1.000 x 500 x 5.000 mm * Zaprti plastični blatniki, spredaj in zadaj * Zaprt bočni odbijač kot reklamna površina * Podvozni ščit zadaj * Plastični odbijač zadaj * A-oznaka zadaj ----Površina za zabojnik: * Dolžina valjčne tirnice, približno 6.830 mm * Pnevmatska 4-kraka zapornica * Mehansko nastavljivi oporni koti (2 položaja), spredaj na levi in desni strani na valjčnih tirnicah * Primerno za zabojnike dolžine 5.500 - 7.000 mm ----Pnevmatike: * 265/70 R 19,5, dvojne pnevmatike ----Lastna teža: * 3.220 kg ----Višina v praznem stanju: * približno 1.130 mm pri obremenitvi ----Barvanje: * Vroče pocinkano podvozje * Zračni rezervoar, osi, vrtilni obroč in povezovalna naprava ----Informacije: * --Dovoljena skupna masa 20.000 kg je tehnično možna-- * Novo vozilo z garancijo proizvajalca * Pridržana možnost sprememb in napak * Medtem lahko pride do prodaje ----Dobavni rok: * Na voljo takoj, od Egestorfa

Stanje: rabljeno, največja dovoljena obremenitev: 23.700 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2008, skupna širina: 2.550 mm, skupna višina: 3.700 mm, Oprema: ABS, Nemška prikolica, Hedpfx Asy Trntokbofl * 30-tonska * Razširljiva na 3 metre * Vzmetene rampe, * 50-mm vlečni obroč * Zračno vzmetenje, Tehnični pregled možen na novo za doplačilo! Dodatne informacije po telefonu Christian Bredemeier

Stanje: novo, največja dovoljena obremenitev: 12.200 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, * TM-TA 14.4: ----Brakes: * Wabco EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Height-adjustable, hot-dip galvanized drawbar +/- 150 mm * 40 mm flange towing eye ----Electrics / Lighting: * 15-pin power connector * LED tail lights * RDÜ tyre pressure monitoring system ----General Attachments: * Jost support winch at the front * 2 x external drop-down supports at the rear * Closed single plastic mudguards * Folding A-board at the rear * Plastic underride guard buffer * Hot-dip galvanized approach protection with integrated chain storage box, W = 370 mm x D = 420 mm x H = 480 mm, at the front left & right ----Load Securing: * Each side with 2 x 5.3 t UVV lashing rings for attaching tensioning elements ----Trough Stops: * 2 removable trough stops for lateral centering of the troughs * Front trough stops pluggable in 4 positions with swivel-mounted stop ----Painting: * Hot-dip galvanized chassis * Axles, springs, air tanks and support winch painted in black ----Information: Hfedpfx Aksl Thyqebjl * Errors and prior sale excepted * New vehicle with manufacturer's warranty ----Delivery time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 12.200 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, * TM-TA 14.4: ----Braking system: * Wabco EBS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange drawbar eye: * Height-adjustable, hot-dip galvanized drawbar, +/- 150 mm * 40 mm flange-type drawbar eye ----Electrics / Lighting: * 15-pin electrical connector * LED tail lights * RDÜ tire pressure monitoring system ----General equipment: * Jost landing gear at front * 2 x external drop-down support legs at rear * Enclosed single plastic mudguards * Foldable A-board at rear * Plastic underride protection buffer * Hot-dip galvanized underrun protection with integrated chain storage box, W= 370 mm x D= 420 mm x H= 480 mm, front left & right ----Load securing: * 2 x 5.3 t UVV lashing rings each side for attaching tensioning elements * Includes 2 ratchet tensioners permanently mounted to the outer frame with chain box Hodpfx Ajpk Dyxjkbsfl * Equalizer chain both sides with eyelet and quick shortening hook, Y-special version 6.3 t ----Container stops: * 2 removable container stops for lateral centering of containers * Container stops at front, pluggable in 4 positions, with pivoting stop ----Paintwork: * Hot-dip galvanized chassis * Axles, springs, air tanks and landing gear painted in a shade of black ----Information: * Tension force with load securing certificate * Errors and prior sale excepted * New vehicle with manufacturer's warranty ----Delivery time: * Available immediately from Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 31.000 kg, skupna masa: 40.000 kg, konfiguracija osi: > 3 osi, prva registracija: 07/2024, dolžina tovornega prostora: 9.290 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 950 mm, * PT 40.0 Profi ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering system, including RtR valve ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment ----Lighting / Electrics: * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12 / 24 V * Removable rear LED beacon * 2 LED reversing lights (activated via reverse gear) ----General equipment: * Manometer - pressure gauge for load weight determination (axles separated into 2 air suspension circuits) * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning sign sets front and rear * VA plastic quarter mudguards with spray protection * HA straight galvanized steel skirts with spray protection * Reflective contour tape on sides and rear * Tool box, galvanized steel sheet, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high ----Low loader platform: Hfjdsl Tlhrjpfx Akbjl * Forepart in front of the turntable platform, approx. 490 mm long with 45° corners * ROBOT-welded anti-slip surface on the steel plate of the turntable platform * Hardwood floor on the running surfaces of the low loader platform ----Load securing (La-Si package comprising): * In front of the front wall support, 1 x 13.4 t UVV lashing point each left & right * 4 lateral holes each in the turntable platform with 2 t lashing capacity each * 1 pair of lashing points (13.4 t) hanging at the rear left & right in front of the rear support * 4 pairs of UVV lashing rings (10 t) on each side, swiveling and lowering, loadable in all directions and recessed in the outer frame * 3 pockets for stanchions per side, with simultaneous 2 t lashing facility ----Widening package: * Hot-dip galvanized mechanical folding outriggers for 3 m overall width (not in the rear taper) * Plank holder for extensions under the chassis on the left, longitudinally ----Excavator arm rest: * Excavator arm rest above HA up to the end support, approx. 2,100 mm long and approx. 190 mm deep * 2 pairs of 6.4 t lashing points each side in the excavator arm rest ----Ramps: * Hydraulic one-piece approach ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * Outer planks of ramps made from hardwood * Steel structure prepped for 6-section control valve ----Loading height: * Loading edge unladen approx. 950 mm +/- 20 mm ----Tires: * 235/75 R 17.5 tires ----Paintwork: * Chassis, turntable, folding outriggers, mechanical supports, and approach ramps hot-dip galvanized * -- Axles, air tanks, drawbar finished in a shade of black -- ----Information: * Vehicle has a day registration in 07/2024 due to missing tire pressure monitoring system, and has not been loaded/used * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available from Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 33.000 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2024, naslednji pregled (TÜV): 02/2027, prostornina tovornega prostora: 30 m³, skupna dolžina: 8.790 mm, skupna širina: 2.550 mm, skupna višina: 3.760 mm, Leto izdelave: 2024, Oprema: ABS, KÄSSBOHRER V2A cisterna za gnojnico, priklopna, 30.000 litrov - tip STN 30L/1 - 12/27 Prva registracija 02/2024, iz prve roke Cisterna iz nerjavečega jekla V2A Premer 2.200 mm 3 prečne pregrade 1 polnilni pokrov DN500 s pokrovom na tečajih Čistilna cev 4 palca po celotni dolžini rezervoarja Rotacijska črpalka VOGELSANG VX 186-260 Q GL, 6.000 litrov/min., zamenljive ohišja Celotna cevovodna napeljava iz nerjavečega jekla V2A Vrtljiv iztok na zadnji strani, 6°, z napravo za izpihovanje zraka 8° sesalna odprtina na zadnji zgornji strani 6 x LED delovne luči Velike posode za cevi na levi in desni strani Osnova BPW z diskovimi zavornimi ploščami WABCO priklopna sistem EBS s programom za stabilnost RSS Hedpfez Am Evox Akbofl WABCO Optiturn - OptiTurn? samodejno zazna, ko vozilo zavije, in ustrezno obremeni ali razbremeni ter dvigne tretjo os priklopnika. To izboljša manevrabilnost priklopnika na omejenem prostoru, saj se zmanjša radij obračanja in je mogoče voziti v ozkih ovinkih. Poleg tega izboljša manevrabilnost pri vožnji nazaj. 1. os je dvižna os (LIFTACHSE) Pnevmatike: 6-krat 385 /65 R 22.5 NAJEM je novi NAKUP, pri nas je vključena tudi možnost celovite storitve (Full-Service-Miete) in je TAKOJ na voljo.

Stanje: rabljeno, prevoženi kilometri: 143.000 km, moč: 316 kW (429,64 KM), prva registracija: 03/2006, vrsta goriva: dizel, lastna masa: 26.000 kg, največja dovoljena obremenitev: 8.200 kg, skupna masa: 17.800 kg, velikost pnevmatike: 385/65R22,5, konfiguracija osi: 6x2, gorivo: dizel, barva: srebrn, voznikova kabina: drugo, vrsta prenosa: mehanski, emisijski razred: noben, vzmetenje: drugo, število sedežev: 3, skupna dolžina: 9.600 mm, obratovalne ure: 14.109 h, gradbena višina: 3.400 mm, Oprema: ABS, centralno zaklepanje, hidravlika, klimatska naprava, nadzor oprijema, nizka raven hrupa, parkirni grelec, računalnik na krovu, tempomat, zapora diferenciala, MAN TGA 26.430 z dvižno osjo, Müller, vozilo za čiščenje kanalizacije (voznikova/sovoznikova vrata kot drsna vrata) Podatki o vozilu: 316 kW / 430 KM - prostornina 10,5 litrov * Dvigna os * Voznikova in sovoznikova vrata kot drsna vrata (posebna izvedba) * Nadgradnja Müller, vozilo za čiščenje kanalizacije Dimenzije in teža: Največja dovoljena skupna masa: 26000 kg * Prazna masa: 17800 kg * Nosilnost: 8200 kg * Višina: 3400 mm * Širina: 2550 mm * Dolžina: 9600 mm Oprema: Euro 4 * Iz prve roke * Ročni menjalnik ZF (16 stopenj) * Zračna zavora * Ogledala, nastavljiva na elektriko * Ogrevana ogledala * 12-voltni dodatni priključek * Zaščita pred soncem * Mehanska strešna odprtina * Kazalnik temperature * Dodatni grelec s časovnikom * ABS * ASR * Blokada diferenciala * Volan, nastavljiv po višini * Velik dodatni predal v kabini iz lesa * Tahograf, analogni * Ogrevan voznikov sedež * Delovne luči * Gasilni aparat 1x * Strešna antena * Držalo za pijačo * Električna okna * Radio / CD * Tempomat * Ogrevan voznikov sedež * Nastavitev višine žarometov * 3 sedeži * Luči za meglo * Kamera za pomoč pri zavijanju v desno Nadgradnja vozila: MÜLLER, prostornina: 6000 litrov * Posoda za blato: 6000 litrov * Letnik: 2006 * TIP: CM F 110 K WA2 Imate kakšna vprašanja o tej ponudbi vozila? Pokličite nas! Leko, številka za WhatsApp: Luka, številka za WhatsApp: Z veseljem vam bomo odgovorili na vaša vprašanja. * Govorimo nemško. * Govorimo angleško. * Parliamo italiano. * Govorimo srbsko/hrvaško. * Mówimy po polsku. * Govorimo rusko. Hfedpfx Aszr Shzokbjl * Govorim bolgarščino. Naše storitve: * Kratkoročne registrske tablice: 5 dni * Izvozne registrske tablice: 30 dni * Potrdila Euro 1 * Izjave dobaviteljev * Sprejem vozil v račun/financiranje * Dostava vozila/transport po Nemčiji * Ladijski prevoz vozil po vsem svetu * Individualne storitve za vsako morebitno situacijo/željo, na zahtevo ... Klima, ročni menjalnik, ogrevan sedež spredaj, ASR, ABS, servisna knjižica, radio, krovni računalnik, tempomat, ogrevana ogledala, centralno zaklepanje z daljinskim upravljanjem, nepušeče vozilo, brez nesreč, servo volan, regulacija nivoja z kompresorjem, merilec vrtljajev, blokiran diferencial, sedežna klop deljiva, zunanji kazalnik temperature, nastavljiv volanski stolpec, zložljiva ogledala, električno nastavljiva ogledala, snemalnik vožnje, vetrobransko steklo, dvojne pnevmatike, vzmetenje: listnato - zračno, naslon za roko, nastavitev višine sedeža, zračno vzmeteno voznikovo mesto, zračno vzmeten voznikov sedež, električna okna, dodatni grelec, ogrevan sedež, delovne luči, strešna antena, 12-voltni dodatni priključek, stikalo za izklop akumulatorja, sušilec stisnjenega zraka, centralni sistem mazanja, pomožni pogon, nizka raven hrupa, rotacijski signal, iz prve roke, dizel, pogon na zadnja kolesa, stanje: rabljeno, HSN 7731, TSN 000, neto cena 74.900 EUR, tehnični pregled + pregled emisij se opravita pred prodajo, označba za fine delce: 4 - zelena, 22-palčna platišča iz lahke zlitine.

Stanje: rabljeno, Leto izdelave: 2023, prostornina tovornega prostora: 30 m³, velikost pnevmatike: 800/60R32, velikost sprednje pnevmatike: 800/60R32, velikost zadnje pnevmatike: 800/60R32, največja hitrost: 40 km/h, delovna širina: 3.000 mm, Oprema: računalnik na krovu, Obleganje (spredaj): 800/60R32, Obleganje (zadaj): 800/60R32, vlečen, krmilna os, monitor zmogljivosti, vlečne cevi, podporna noga / kolo, centralno mazanje, ISOBUS, zgornja priključitev (obroč)_____Tridem, 1. in 3. os krmiljeni, vzmetenje drogov, kamera, Vogel-sang razdelilnik vlečnih cevi, centralno mazanje, TB prestavljanje, NIR senzor, kraj skladiščenja: stranka Hjdpfxezdh Rqs Akbefl

Stanje: rabljeno, lastna masa: 5.300 kg, največja dovoljena obremenitev: 18.700 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2014, dolžina tovornega prostora: 9.400 mm, vzmetenje: jeklo, velikost pnevmatike: 205/65R17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 205/65R17,5, velikost zadnje pnevmatike: 205/65R17,5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Višina nakladalne površine približno 900 mm, dolžina nakladalne površine približno 9.400 mm, pritrdilne točke. – Pridržana pravica do sprememb, napak in tiskarških napak, ilustrativne slike – Več podatkov na: !, Več podrobnosti: ! Hfsdpfxjz An Hns Akbjl