Fliegl Dtl 300 Agrar Greenlight Hydraul. 3-Achs Tieflad nakup rabljenega (43.974)

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 06/2024, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.680 mm, Day registration in 06/2024 due to the new TPMS regulation. Chassis: Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin Outer frame slightly angled with 'Load-Lock profile' for lashing strap attachment 24 t, 2-speed landing gear, single-sided operation Side underrun protection, aluminum Rear underrun protection, galvanized steel Quarter-shell mudguards in front of and behind axle assembly With anti-spray mud flaps compliant with EU regulations Rear impact protection Spare wheel holder for 1 spare wheel, with wheel fixing kit Axles & Suspension: SAF disc brake axles with 430 mm disc diameter 'Axles/chassis laser alignment' reduces tire wear and fuel consumption 1st axle automatic lift axle, additionally electrically operable from the truck Includes forced lowering and start-up aid, no installation required on truck Brake System: 2-line compressed air braking system Spring-loaded parking brake EBS by Wabco, electronic braking system with EBS socket at the front, without connection cable With raise & lower valve + auto-reset function Vehicle stability control system Axle load detection via EBS CAN bus signal, display via monitor Wheels and Tires: 385/65 R22.5" / 6 steel rims, factory silver Electrics: 24 volt, multi-chamber lights, side LED marker lights (amber) 2 white LED position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin and 1 x 15-pin foolproof sockets at the front, without connection cable 2 additional LED work lights at the rear, controlled via reverse light Floor: Approximately 30 mm thick phenolic plywood, mounted on continuous longitudinal beams for high point load capacity, suitable for forklift axle loads up to max. 7100 kg at the bulkhead Drop-in Slats: 5 rows of aluminum V-insert slats 2 pairs of Vario steel slats, in conjunction with Vario beams for fore and aft load securing (then no insert slats required in the area of the steel slats) Hsdpfx Agjri Hiho Ienl Rear Portal Doors: Double-winged, each with 2 internal lock rods. Tarp with welded horizontal and vertical belts Unladen weight: 5,960 kg Offer and pictures non-binding

Stanje: novo, največja dovoljena obremenitev: 29.500 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 1.450 mm, prostornina tovornega prostora: 25 m³, skupna širina: 2.550 mm, Vehicle is from current production - available in approx. 2 weeks Vehicle / Body: Tipping Trough Gross Weight: 35,000kg / 39,000kg Unladen Weight: 5,500kg !!! Payload: 29,500kg / 33,500kg Total Length: 8,600mm Volume: 25 cbm Further Information: - Overall height approx. 3,160mm - Internal width approx. 2,350mm - Coupling height approx. 1,200mm Chassis – Semi-Trailer Tipper: - Fine-grained steel welded construction, basic lightweight design - 1x centre support leg - Folding underrun protection - Underrun protection with "spring assistance" for easier operation - Half-shell mudguards - Integrated “mudguard holder” with a stone-repellent surface - With antispray mud flaps only on the rear axle - 2 towing hooks at the rear Axles & Suspension: - SAF disc brake axles with 430 mm disc diameter - “Axle/chassis laser measured" for reduced tyre wear and fuel consumption - Axles in off-road specification - Air suspension - Air bag pressure gauge, mounted front on curved chassis - 1st axle is an automatic lift axle, also electrically operable from the truck, including forced lowering and start-off assist, without truck installation (start-off assist is functional up to 30% axle overload and up to a max. speed of 25 km/h) Braking System: - 2-line compressed air brake system Coloured line routing for easy servicing. - Spring-actuated parking brake - 2 front foolproof coupling heads, without connecting line - 24 volt EBS, Electronic Braking System with EBS socket at the front, without connection cable Hnsdpfx Aovhyf Rjg Ijl - With raise & lower valve - Vehicle stability control system - Automatic tip lowering with shut-off valve Wheels and Tyres: - 6 x 385/65 R22.5" European brand, manufacturer’s choice Electrics: - 24 volt, multi-chamber LED lights, side yellow LED marker lights, number plate illumination in LED (Note: with some tractors, diagnostic errors may occur even though functions are correct) Side yellow LED lighting linked with indicator - "flashing side marker lights" - Premium LED side marker lamps, each with 20 LEDs per unit - 2 white front position LED lights included - 2 white/red lane control rear LED lights included - 2 x 7-pin and 1 x 15-pin foolproof sockets at the front, no connection cables - LED working lights mounted on both sides (activated via reverse light) - 2 additional LED work lights recessed at rear Hydraulics: - High-pressure cylinder max. 250 bar, smallest stage hard chromed, with HDK screw coupling, fixed part, NW 48 mm - Hyva make - Operated hydraulically via truck PTO - Hydraulic connection with hose and vehicle plug NW = 54 mm with large wing nut Tipping Body: HARDOX steel round trough in “Stone Master Design” of highly wear-resistant HB 400/450 steel. Inclined front wall with external hydraulic cylinder mount. Interior with ladder at front wall - Greenline – conical, aerodynamic body design - Shovel and broom holder on exterior front wall - "Membrane" tailgate - Tailgate as pendulum flap with "double-joint hinge", externally mounted with dual hook lock. 2 clamping bolts with toggle locks at the bottom on each side - Tailgate with rubber seal Note: Heat-resistant up to max. 170°C! - Continuous sidewalls 4 mm thick, floor 4/5 mm thick, wear- and weight-optimised structure - Fliegl S.T.E.P. – swivelling platform at front with folding ladder for side access LH side,

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 07/2022, velikost pnevmatike: 385/65 R22,5, Krone SDR 27 Cool Thermo King SLX 300, dvižna os, škatla za palete, priprava za dvojno nadgradnjo (brez nosilcev), širina za cvetje 2.490 mm, škatla za orodje, nosilec za rezervno kolo, zadnji valjasti odbijač, skupne hladilne ure 1.936 / dizel 1.806. Prodaja izključno pravnim osebam, brez kakršnega koli jamstva. Pridržujemo si pravico do napak in vmesne prodaje. Hnsdpfxey N Tgps Ag Isl

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 07/2022, velikost pnevmatike: 385/65 R22,5, Krone SDR 27 Cool Thermo King SLX 300, dvižna os, škatla za palete, priprava za dvojno nadgradnjo (brez nosilcev), širina za cvetje 2.490 mm, škatla za orodje, nosilec za rezervno kolo, zadnji valjasti odbijač, skupne hladilne ure 1.936 / dizel 1.806. Prodaja izključno pravnim osebam, brez kakršnega koli jamstva. Pridržujemo si pravico do napak in vmesne prodaje. Hnsdpfx Aey N Tgieg Isl

Stanje: novo, lastna masa: 1.150 kg, največja dovoljena obremenitev: 2.350 kg, skupna masa: 3.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 1.950 mm, višina nakladalnega prostora: 300 mm, prostornina tovornega prostora: 2,4 m³, barva: drugo, gradbena višina: 980 mm, delovna širina: 2.060 mm, Manufacturer: Brian James Trailers Model: Rear Tipper Cargo Tipper Gross Vehicle Weight: 3,500 kg, Tri-axle Payload Capacity: 2,350 kg Unladen Weight: 1,150 kg Dimensions of Load Bed: 4,000 x 2,000 x 300 mm Tyres: 195/60 R12C Hnjdpfow Df Rcjx Ag Ijl Loading Height: 680 mm Tipping Angle: up to 60° - Equipped with electric pump - New load bed design - Smooth-surface loading area - Swinging rear tailgate - Reinforced loading bed - Robust, stable sidewalls - Integrated lashing points - Safety and maintenance support struts - Tool/storage box - Spare wheel included - Lateral lashing points and net hooks - Integrated coupling lock - Modern lighting system - 5-year chassis warranty Price includes vehicle registration certificate (Part II) and COC papers. We carry a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. Free temporary transit plates on request. We perform repairs on trailers of all makes. Additional accessories available upon request. Technical specifications, prices, and details are subject to change and errors excepted. We do not accept liability for mistakes or typographical errors. Features: - Automatic reversing mechanism - Rubber suspension axles - Tiltable load bed - Jockey wheel - Marker lights - Hot-dip galvanized - Braked - Inclusive warranty - Tipping angle up to 60° - Electric pump - New load bed design - Smooth-surface loading area - Swinging rear tailgate - Reinforced loading bed - Sturdy sidewalls - Integrated lashing points - Safety/maintenance support strut - Tool/storage box - Spare wheel - Lateral lashing points and net hooks - Integrated coupling lock - Modern lighting system - 5-year chassis warranty

Stanje: novo, lastna masa: 1.100 kg, največja dovoljena obremenitev: 2.400 kg, skupna masa: 3.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 3.600 mm, širina tovornega prostora: 1.950 mm, višina nakladalnega prostora: 300 mm, prostornina tovornega prostora: 2,2 m³, barva: drugo, gradbena višina: 980 mm, delovna širina: 2.060 mm, Manufacturer: Brian James Trailers Model: Rear Tipper Cargo Tipper Permissible Total Weight: 3,500 kg, 3-axle Payload: 2,400 kg Unladen Weight: 1,100 kg Bed Dimensions: 3,600 x 2,000 x 300 mm Tires: 195/60 R12C Hnjdpfxsw Df Eye Ag Ijl Loading Height: 680 mm Tipping Angle: up to 60° Features: - Equipped with electric pump - New platform design - Platform with smooth surface - Pendulum tailgate - Reinforced loading bed - Robust side panels - Integrated lashing points - Safety support / maintenance stand - Storage box - Spare wheel - Side lashing points and net hooks - Integrated coupling lock - Modern lighting system - 5-year chassis warranty Price includes vehicle registration document (Registration Certificate Part II and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. Upon request, we provide a free transfer license plate. We repair trailers from all manufacturers. Additional accessories available upon request. Technical modifications, price changes, and errors excepted. No liability is accepted for errors or printing mistakes. Features summary: automatic reversing system, rubber suspension axle, tiltable loading area, jockey wheel, marker lights, hot-dip galvanization, braked, including warranty, 60° tipping angle, electric pump, new platform design, smooth loading surface, pendulum tailgate, reinforced loading bed, robust side panels, integrated lashing points, safety support/maintenance stand, storage box, spare wheel, side lashing points and net hooks, integrated coupling lock, modern lighting system, 5-year chassis warranty.

Stanje: rabljeno, konfiguracija osi: 3 osi, skupna širina: 25.500 mm, skupna višina: 35.000 mm, Leto izdelave: 2018, Oprema: ABS, = More options and equipment = Hsdsy Svrgepfx Ag Ijnl - Rear air suspension - Front air suspension = Notes = For inquiries about the vehicle, Mr. Seidel (by phone) will be happy to assist you. Fliegl DTS 300 low-bed trailer BPW axles, drum brakes, spring-loaded brakes, mechanical ramps, permissible total weight: 24,000 kg, unladen weight: 6,350 kg, payload: 17,650 kg, loading dimensions: L 8,490 mm W 2,510 mm, tire tread: 1st axle 7-12 mm, 2nd axle 7-8 mm, 3rd axle 4-7 mm On request, we can provide you with a leasing or financing offer. Mr. Seidel (tel.) will be happy to assist you. Further information can be found on our homepage. ... Errors, changes, and prior sale excepted!!! = Further information = Unladen weight: 6,350 kg Payload: 17,650 kg GVW: 24,000 kg Please contact Tobias Ebert for more information.

Stanje: rabljeno, največja dovoljena obremenitev: 28.410 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2012, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 700 mm, FLIEGEL polpriklopnik s stranicami in 3 osmi Nosilnost: 28.410 kg TIP: SDS350 Zavora: disk Os: BPW + zračno vzmetenje 2x podporna točka (JOST) Dolžina: 13,60 m Širina: 2,40 m Hsdpfx Agewgghnj Ionl Višina: 0,70 m Z veseljem vam pomagamo tudi pri financiranju/leasingu v sodelovanju z našimi partnerji. Vse navedene informacije so brez jamstva. Pridržujemo si pravico do napak in vmesne prodaje.

Stanje: rabljeno, prva registracija: 09/2016, barva: drugo, Leto izdelave: 2016, Oprema: ABS, = Druge možnosti in oprema = - BPW osi - Dvižna os - Bobnaste zavore = Opombe = Hodjy Avafspfx Ag Isnl Fliegl, 2016, BPW osi, 1. os dvižna, bobnaste zavore = Podatki o podjetju = Bančni podatki: Račun pri Rabobank: 39.33.10.655 IBAN: NL73RABO0393310655 SWIFT koda: RABONL2U - Pred transakcijo vedno preverite naše bančne podatke! - Vozila ni možno rezervirati brez pologa. - Pridržujemo si pravico do napak pri pisanju in besedilu za vsa ponujena vozila.

Stanje: novo, lastna masa: 5.740 kg, največja dovoljena obremenitev: 24.260 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, barva: srebrn, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Lokacija vozila: Bovenden, rotacijska luč, 3 osi, SAF osi, vrtljiva ploščad, listnate vzmeti, ABS (protiblokirni sistem), možnost razširitve na 3 m, pritrdilne zanke, nakladalne rampe v dveh delih, mehanske rampe, izvlečna vlečna gred, stranska aluminijasta zaščita, dvojne pnevmatike, EBS. Nadgradnja: dolžina nakladalne površine pribl. 8,5 m, možnost razširitve na 3,05 m. Predstavitveno vozilo! Hodpfxsxbttqs Ag Isnl Parabolično vzmetenje z izravnavo osi zadaj, 3x 10 t SAF osi, možna dovoljena skupna masa 30 t, po dolžini nastavljiva vlečna gred. Novo vozilo iz zaloge z enodnevno registracijo na proizvajalca! PODATKI O DODATNI OPREMI SO BREZ GARANCIJE, spremembe, vmesna prodaja in napake so pridržane!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S1576, skupna masa: 31.000 kg, konfiguracija osi: 2 osi, dovoljena osna obremenitev (os 1): 10.000 kg, dovoljena osna obremenitev (os 2): 10.000 kg, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.250 mm, višina nakladalnega prostora: 1.200 mm, prostornina tovornega prostora: 20 m³, vzmetenje: hidravlika, velikost pnevmatike: 600/55-R26,5, stanje pnevmatik: 100 odstotek, medosna razdalja: 1.810 mm, največja hitrost: 60 km/h, barva: rdeča, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2025, Opis Podvozje lakirano u novosivoj: Optimizovano za korisnu nosivost s integriranim okvirom vozila Ukupna masa 31.000 kg, opterećenje na zadnjoj osovini do 20.000 kg, prihvaćeno opterećenje sedla 11.000 kg, međuosovinski razmak cca 1810 mm, Visina sedla cca 1400 mm Podizna nožica Teška kiper korpa 30 cbm s cilindrom napred Poluokrugli čelični bunker od Hardoxa 400, debljine 6 mm, cca 7.200 mm x 2.250 mm x 1.200 mm, kompletno čelična korpa grundirana, boja crvena Hidraulična zadnja stranica (potreban 1 dvosmerni hidraulički priključak) Kočioni sistem sa 2 kruga zraka 2 osovine s kočnicama, zadnja osovina upravljiva, automatski blokirajuća Osovine s doboš kočnicama standard Čelične felne Izvedba za 60 km/h za Nemačku s TÜV dokumentacijom (uključuje kontur svetla, bočne oznake) Hidraulično vešanje Hidraulično preklopiva zaštita od podletanja Osvetljenje 24 V s 15-polnom utičnicom, bez spojnog kabla Zadnja kontur svetla (bela/crvena) Prednja poziciona svetla (bela) Označavanje kontura po ECE R 048 Hjdoyik R Ijpfx Ag Isnl Prodaja podložna prethodnoj prodaji! Informacije bez garancije!

Stanje: novo, številka stroja/vozila: 2f960ff7c44de83fd060ec5df, lastna masa: 6.750 kg, največja dovoljena obremenitev: 32.250 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.150 mm, prostornina tovornega prostora: 50 m³, skupna dolžina: 10.300 mm, skupna širina: 2.550 mm, skupna višina: 3.670 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22,5, Further Information Chassis Semi-Trailer Tipper Fine-grained steel welded construction, lightweight basic design, fifth-wheel plate with exchangeable 2" kingpin Curved front end patented 24 t, two-speed landing gear, single-sided operation, with straight base, without thrust compensation Wheel chocks with holder Folding underrun protection Half-shell mudguards Integrated mudguard bracket, stone-repellent surface Tarp bar with holder Tow hook at rear Axles & Suspension BPW disc brake axles with 430 mm disc diameter Axle/chassis laser alignment to reduce tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and traction aid Hot-dip galvanized lift axle mechanism, 10-year warranty against corrosion Braking System 2-line air brake system, color-coded piping for easy service Spring-loaded parking brake Hjdpfx Agei Rizfs Ionl 2 foolproof coupling heads at front, without interconnection EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractors that ensure the functionality of ABS! With raise/lower valve Vehicle driving stability system Wheels and Tires 385/65 R22.5 Steel rims, factory silver "TPMS" Tire pressure monitoring system (ECE R 141), display via screen in towing vehicle via EBS, not installed in truck (truck needs to be prepared; system only for original tires) Electrics 24 Volts, multi-chamber lights, side yellow LED lighting Side yellow LED lighting linked to turn signal, "flashing side markers" 2 x 7-pin foolproof sockets at front, without interconnecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operated hydraulically via truck PTO Body Steel half-pipe body made of highly wear-resistant HB 400 steel, sloped front wall with external hydraulic cylinder mount. Shovel and broom holders outside on the front wall. Climbing access inside at front wall. Side walls continuously 3 mm, floor continuously 3 mm thick Membrane rear wall Internal width at base approx. 1440 mm Aluminum rear wall, pendulum-mounted with "double joint hinge" and two-leaf door split (1/2 to 1/2), overhead swing bar, each door with its own grain chute Standing platform with access, connecting plate for air/electric and brake with large clearance for optimal operability Rolling tarp to be stowed to the right in direction of travel, with central locking on the left in direction of travel Approval Country/ Registration Germany Type approval in accordance with EC 2007/46 Body strength as per EN 12642 24/7 Service Hotline Prepared for single-line license plate holder Warning sign according to ECE-70 Contour marking with reflective strips acc. to ECE R 048, white on sides and red at rear Paintwork Frame: DB 7350 Novagrau "10-year warranty against corrosion" Body: Single color to RAL selection Rolling tarp: RAL 7035 light grey

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 05/2015, prostornina tovornega prostora: 55 m³, skupna dolžina: 10.800 mm, skupna širina: 2.550 mm, skupna višina: 3.700 mm, barva: rdeča, Leto izdelave: 2015, Oprema: ABS, = Additional Options and Accessories = - Electronic Braking System (EBS) - Toolbox - Central lubrication system = Remarks = Fliegl tipping body 55 cubic meters 3 axles Aluminium body Lift axle Air suspension SAF axles ABS ZSA (trailer stability assistance) Hjdpfeyuyrzox Ag Ijnl Roll tarp Platform Combination tailgate Grain chute Tires 60% GR 385/65R 22.5 ID No. 362 We look forward to welcoming you for consultation, contract signing, or vehicle collection at our dealership. Please arrange an appointment. If you are unable to come to our dealership, we offer full processing via telephone/email/WhatsApp/fax. Upon request, we can deliver your new vehicle directly to your door. This means for you: the best price, maximum security, and convenience when purchasing your vehicle. Trade-In We are happy to accept your used vehicle as a trade-in. We offer you the option of a digital vehicle appraisal based on your vehicle photos, even without visiting the dealership. Our specialized purchase team guarantees you a top price. Upon request, we can deliver your new “pre-owned” vehicle anywhere in Germany directly to your door and collect your trade-in vehicle. Financing - Leasing Immediate approval and settlement of your existing finance agreements. Your specialist partner for cars, vans, commercial vehicles, and construction machinery ITC GmbH & Co. KG Siemensstraße 7 32312 Lübbecke (industrial area) Visit us on our website Over 400 vehicles in stock at all times The information provided in advertisements, online listings, price tags, and images are non-binding descriptions and do not constitute guaranteed features. The seller assumes no liability/warranty for typographical and data transmission errors. Listed features may need to be checked separately; the offer generally comes without a new roadworthiness inspection (TÜV). We would be happy to make you an offer for this service via our partner workshop. Errors and prior sale excepted. = Further Information = Unladen weight: 6,060 kg Payload: 31,940 kg Gross vehicle weight: 38,000 kg Body manufacturer: Fliegl Tipping direction: Rear Sale price: €19,800, US$22,830

Stanje: novo, številka stroja/vozila: 195f80ad09517628522e33a91, lastna masa: 7.300 kg, največja dovoljena obremenitev: 16.700 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low Loader Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holders Aluminum side underrun protection Rear mudflaps across the entire width Quarter shell fenders in front of 1st axle 1st pair of wheel recesses embedded after the kink in the loading bed area, ramped entry, length at the bottom approx. 1600 mm, approx. 400 mm deep. Note! The frame in the main beam area is 400 mm higher than the wheel recess. 2nd pair of wheel recesses embedded between the axles in the loading bed area, ramped entry, length at the bottom approx. 600 mm, approx. 300 mm deep. Note! The frame in the main beam area is 300 mm higher than the wheel recess. Sliding extensions for widening, extendable to 3,000 mm (not in tail ramp area) (The track width of the construction machines or vehicles to be transported must not exceed the external frame width of 2,550 mm) Sliding extensions for widening, extendable to 3,000 mm, also at the bottom in the wheel recesses, foldable at the wheel recess extensions (extension not in the tail ramp area) (The track width of the construction machines or vehicles to be transported must not exceed the external frame width of 2,550 mm) 70 mm timber planks for extension to 3,000 mm Hedpsi Ri Rvjfx Ag Ienl Tie-down points on low loader 1 pair of lashing cutouts embedded in the longitudinal beam at the front in the kink, each rated at 10 t 4 pairs of lashing holes in the outer frame, each rated at 5 t (for attaching tie-down straps) 7 pairs of lashing mushrooms recessed at the top and side in the outer frame, each rated at 10 t 1x at the front in the kink 6x in the loading bed First lashing point 250 mm from the front and last max. 250 mm from the rear, spacing between lashing points no greater than 1,100 mm Drawbar for turntable trailer Drawbar with certified 40 mm towing eye Axles & suspension SAF drum brake axles Laser axle/chassis alignment – reduces tire wear and fuel consumption Parabolic spring suspension with maintenance-free steel-rubber bushings Wheels and tires 235 / 75 R 17.5 Manufacturer's choice Steel rims in twin arrangement, factory silver Braking system 2-line compressed air braking system Spring-applied parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS connector at the front, with connection cable. Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrics 24 Volt, multi-chamber lights, LED side marker lights, 2 white position lights at the front 2 white/red lane guidance lights at the rear 2 x 7-pin fail-safe connectors at the front, with connection cable, 1 LED rotating beacon with holder, switched via side light (removable beacon) 2 pairs of warning panels, double LED illuminated and extendable to 3,000 mm Floor Front kink with steel/checkered plate covering Storage box embedded in the ramp to the kink, then with 70 mm softwood floor, in the wheel arch area with steel/checkered plate covering Tail ramp with 70 mm softwood floor Low loading area including tail ramp: 6,500 mm Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Wood-covered With spring assist Operating Instructions For 10,000 kg axle load an exemption is required, only indivisible loads allowed! The stated gross weight is technically possible, but depending on the type of load, the gross weight may not be achievable within the pe

Stanje: novo, številka stroja/vozila: 2dff0c136c85096f36822a0bb, lastna masa: 7.150 kg, največja dovoljena obremenitev: 16.850 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis - Low-bed Trailer Steel welded construction Turntable with heavy-duty slewing ring, storage box integrated into turntable front section Foldable rear supports 2 wheel chocks with holders Aluminium side underrun protection Full-width rear mudflaps Extendable extensions to 3,000 mm (not at the rear bevel) (Note: The track width of the construction machines or vehicles to be transported must not exceed the external frame width of 2,550 mm) Central storage compartment for timber boards on the loading platform 70 mm timber boards for extension to 3,000 mm Low-bed lashing rings 3 pairs of 10 t lashing points integrated into the front floor 6 pairs of 10 t lashing mushrooms recessed in the top and side of the outer frame 1 x by the neck area The remaining points are distributed at no more than 1200 mm intervals 1 x at the rear bevel 5 pairs of stake pockets recessed in the outer frame, internal dimensions 70 x 40 mm (can be converted to 5 t ring lashing eyes, not included) Drawbar Turntable Trailer Coupling Drawbar with certified 40 mm towing eye Axles & Suspension SAF drum-braked axles Axles/chassis laser-aligned to reduce tyre wear and fuel consumption Parabolic spring suspension with maintenance-free steel-rubber bearings and mechanical Hodpfx Agoi Riy Es Ionl Axle load equalisation (rocker balancing) Brake System 2-line compressed air brake system Coloured line routing for easy service Spring-loaded parking brake included 2 fail-safe coupling heads at the front, with connecting lines to the tractor unit ABS and ALB, with ABS plug at the front, with connecting cable Note: The trailer may only be towed by vehicles ensuring the proper function of ABS! Wheels and Tyres 235/75 R 17.5 Manufacturer’s choice Steel twin wheels, factory silver finish Electrics 24 volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin fail-safe plugs at the front, with connecting cable 1 LED beacon with holder, switched via parking lights (removable beacon) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Steel floor in the front section, followed by 70 mm softwood flooring; wheel arch covers in steel/chequer plate Rear bevel with 70 mm softwood flooring Low-bed area incl. rear bevel 8,200 mm Access Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Wood-covered, included With spring assist Operating Notes An exemption permit is required for 10,000 kg axle load—only indivisible loads allowed! The specified total weight is technically achievable, but depending on the load, the permissible total weight may not be reached due to axle/support/kingpin limits. (Poor driving and tracking may result from incorrect load distribution) Country of Registration/Plates Country of registration: Germany With Dekra inspection and appraisal (according to §13 EU-FGV) 24/7 service hotline Prepared for double-line license plate holder Contour marking with reflective stripes per ECE R 048, white to the side, red to the rear Paintwork Frame DB 7350 Novagrau 10-year guarantee against rust-through Drawbar galvanized or black, manufacturer's choice Access ramps hot-dip galvanized Note: Archive images!

Stanje: novo, številka stroja/vozila: ede0610378cbe39cc4883251d, lastna masa: 24.000 kg, največja dovoljena obremenitev: 7.550 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further information Chassis Low-loader Trailer Steel welded construction 1st pair of wheel recesses embedded in the driving lane area after the steel platform, bevelled for entry, approx. 1,400 mm long at the bottom, approx. 400 mm deep. Note! Frame is 400 mm higher in the main beam area than at the wheel recess. If machines are to be transported where overall height must be verified, we request a technical data sheet for the machine types with precise specifications (if overall height is exceeded -> customer is responsible, approval required). Depending on ground clearance under the machines, inserts for the wheel recesses may be required on the customer side. Turntable with robust ball race ring, storage box integrated in the turntable front section Rear supports foldable 2 wheel chocks with holder Aluminium side underrun protection Full-width rear mudflap Extending wideners to 3,000 mm (not in rear bevel area) (The track width of the construction machines or vehicles to be transported must not exceed the outside frame width of 2,550 mm) Central storage compartment for wooden planks on loading area 70 mm wooden planks for widening to 3,000 mm Lashing eyes low-loader 3 pairs of 10 t lashing points integrated in the floor at the front incl. 6 pairs of lashing mushrooms recessed on top and at the side in the outer frame, each 10 t 1 x at the gooseneck The remaining distributed between, spacing not greater than 1,200 mm 1 x rear bevel 5 pairs of stake pockets integrated into the outer frame, internal 70 x 40 mm (convertible to 5 t ring lashing eyes, not included) Drawbar assembly trailer turntable Drawbar with tested 40 mm towing eye Axles & Suspension SAF drum-braked axles Axles/chassis laser aligned to reduce tyre and fuel wear Parabolic suspension with maintenance-free steel-rubber bearings Brake system 2-line compressed air brake system Hjdpfx Asi Ri Rysg Ionl Colour-coded piping for easy service Spring loaded parking brake 2 interchange-proof coupling heads at the front, with connecting lines to the tractor unit ABS and ALB, with ABS plug at the front, with connection cable Note: The trailer may only be towed by tractor units which ensure the functionality of ABS! Wheels and tyres 235 / 75 R 17.5 Manufacturer’s choice Steel rims in twin arrangement, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED illumination 2 white position lights at front 2 white/red track marker lights at rear 2 x 7-pin interchange-proof plugs at front with connecting cable 1 LED beacon with bracket, switched via parking light (removable lamp) 2 pairs of double warning boards, LED-lit and extendable up to 3,000 mm Floor Front area steel floor, incl. Then with 70 mm softwood floor, in wheel arch area steel/chequer plate covering Rear bevel with 70 mm softwood floor Low-loader deck incl. rear bevel 8,200 mm Loading ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable Wood-covered With spring lifting aid Operating instructions For 10,000 kg axle load, a special permit is required, only indivisible loads possible!!! The specified total weight is technically possible; depending on the load, the total weight may not be achievable while complying with permissible axle/kingpin/saddle loads. (Poor driving and tracking behaviour possible due to incorrect load distribution) Country of registration / Plates Country of registration: Germany incl. With Dekra approval and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for two-line number pla

Stanje: novo, številka stroja/vozila: d461243f559015adca5bb372c, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-bed Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holders Aluminium side underrun protection Full-width rear mudflap Half-shell mudguards on 1st axle with anti-spray mudflaps Anti-spray mudflaps behind 2nd and 3rd axle 1 plastic toolbox with shelf, dimensions: W=620/H=360/D=440 mm, lockable with a padlock Extendable width up to 3,000 mm Central storage compartment for timber planks on loading area 70 mm timber planks for widening to 3,000 mm Lashing rings for low-bed (40 lashing points) 1 pair of lashing apertures recessed in the front longitudinal beam at the gooseneck, each rated for 10 t 4 pairs of lashing holes in the external frame, each rated for 5 t (for lashing strap hooks) 7 pairs of lashing mushrooms embedded on top and side of the outer frame, each rated for 10 t 1 at the front on the gooseneck 6 in the low-bed section First lashing ring 250 mm from the front, last max. 250 mm from the rear, spacing between lashing rings not greater than 1,100 mm 5 pairs of stake pockets embedded in the external frame, internal dimensions 70 x 40 mm (convertible to 5 t ring lashing eyes) 2 pairs of additional folding lashing eyes, each rated for 10 t 1 on the gooseneck (protruding) 1 recessed behind the last axle Drawbar coupling for turntable trailer Drawbar with certified 40 mm towing eye Axles + Suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker equalizer) Wheels and tyres 235/75 R 17.5 Manufacturer's choice Steel rims in twin configuration, factory silver Braking system 2-line pneumatic braking system Spring-actuated parking brake 2 fail-safe coupling heads at the front, with connecting lines to towing vehicle ABS and ALB, ABS connector at the front with connecting cable Brand: Wabco, Knorr or Haldex Electrics 24 Volt, multi-chamber rear lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marking lights at the rear 2 x 7-pin fail-safe plugs at the front, with connecting cable 1 LED beacon with bracket, controlled via parking lights (removable beacon) 2 pairs of warning boards, double, LED illuminated, extendable to 3,000 mm Floor Gooseneck front with steel tread plate covering Storage box recessed in the transition to the gooseneck Followed by 70 mm softwood flooring, wheel arch areas with steel tread plate covering Rear chamfer with 70 mm softwood flooring Low-bed area incl. rear chamfer: 6,500 mm Loading ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable Timber-layered Hydraulically operated via tractor PTO with throttle, operated from left-hand side, front Hydraulic connection with SVK coupling NW 10/3, including connecting hose Country of registration / Plates Country of registration: Germany 24/7 service hotline Prepared for two-line number plate holder Contour marking with reflective strips according to ECE R 048, white on the side and red at the rear Warning board according to ECE - 70 Hsdpfsi Ri Dlox Ag Ionl Paintwork Frame hot-dip galvanized incl. passivation 15-year warranty against rust-through Drawbar galvanized or black, at manufacturer's discretion Loading ramps hot-dip galvanized Note: These are archive images!

Stanje: novo, številka stroja/vozila: 628cde0fe99cc2d3c8eaa8dd8, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-Loader Trailer Steel welded construction Turntable with robust ball bearing slewing ring Foldable rear support 2 wheel chocks with holder Side underrun protection made of aluminium Full-width rear spray flap Half-shell mudguards on 1st axle with anti-spray flaps, anti-spray flaps behind 2nd and 3rd axle 1 plastic toolbox with shelf, dimensions: width=620 mm / height=360 mm / depth=440 mm, lockable with padlock (padlock not included) Extendable width up to 3,000 mm Storage compartment for wooden planks in the centre of the loading area 70 mm wooden planks for extension to 3,000 mm Tie-down lugs for low loader (40 lashing points) 1 pair of lashing cut-outs in the longitudinal beam at the front, recessed into the gooseneck, each rated at 10 t 4 pairs of lashing holes in the outer frame, each rated at 5 t (for securing with lashing straps) 7 pairs of lashing mushrooms, recessed at the top and side of the outer frame, each rated at 10 t 1 at the front on the gooseneck 6 in the low bed First lashing point 250 mm from the front, last max. 250 mm from the rear, spacing between lashing points not greater than 1,100 mm 5 pairs of stake pockets recessed in the outer frame, interior dimensions 70 x 40 mm (convertible to 5 t ring lashing points, not included) 2 additional pairs of folding lashing rings, each rated at 10 t 1 on the gooseneck (protruding) 1 behind the last axle, recessed in the floor Towing Device Turntable Trailer Drawbar with certified 40 mm towing eye Axles and Suspension Drum brake axles, manufacturer’s choice Axle/chassis laser alignment to reduce tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalisation (rocker equalisation) Wheels and Tyres Hnjdpfx Aoi Ri Ddsg Iel 235 / 75 R 17.5 Manufacturer’s choice Steel rims, twin arrangement, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front with connecting lines to the tractor unit ABS and ALB, with ABS socket at the front and connecting cable Manufacturer: Wabco or Knorr Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane lights at the rear 2 x 7-pin non-interchangeable plugs at the front with connecting cable 1 LED beacon with bracket, switched with parking lights (removable beacon) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Gooseneck at the front with steel/chequer plate covering Toolbox recessed into transition slope to gooseneck Following area with 70 mm softwood floor, steel/chequer plate in wheel arch area Rear taper with 70 mm softwood floor Low-loader deck including rear taper: 6,500 mm Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Timber surfaced With spring lift assistance Country of Registration / License Plates Country of registration: Germany 24/7-Service Hotline Prepared for two-line license plate holder Contour marking with reflective strips according to ECE R 048, white on sides, red at rear Warning sign according to ECE-70 Painting Frame hot-dip galvanized including passivation 15 years’ warranty against corrosion perforation Drawbar galvanized or black, manufacturer’s choice Loading ramps hot-dip galvanized Attention! Archive images shown!

Stanje: novo, številka stroja/vozila: f8fb99947a1c19bc4d63549ff, lastna masa: 6 kg, največja dovoljena obremenitev: 17 kg, skupna masa: 24 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-bed Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Rear foldable support 2 wheel chocks with holders Side underrun protection in aluminium Full-width rear mudflap Half-shell mudguards on the 1st axle with anti-spray mudflaps; anti-spray mudflaps behind 2nd and 3rd axles 1 plastic toolbox with shelf, dimensions: width 620 mm, height 360 mm, depth 440 mm, lockable with padlock (padlock not included) Extendable width up to 3,000 mm (not at rear slope) (track width of machines or vehicles to be transported must not exceed external frame width of 2,550 mm) Central storage compartment for timber planks on the loading platform 70 mm timber planks for widening to 3,000 mm Tie-down eyes for low-loader: 1 pair of flush-mounted ring lashing eyes at the front on the swan neck, each rated at 5t 7 pairs of lashing mushroom pins, recessed on top and sides of outer frame, each rated at 10t 1x front on swan neck 6x in low bed area First lashing eye 250 mm from the front and last max. 250 mm from the rear, distance between lashing eyes not more than 1,100 mm 5 pairs of stake pockets recessed in the outer frame, internal dimensions 70 x 40 mm (convertible to 5t ring lashing eyes, not included) 2 additional pairs of foldable lashing eyes, each rated at 10t 1x on swan neck (protruding) 1x behind the last axle, recessed in the floor Drawbar assembly for turntable trailer: Drawbar with certified 40 mm towing eye Axles & Suspension SAF drum brake axles Hnsdpfxei Riwfe Ag Isl Axle/chassis laser alignment to reduce tyre wear and fuel consumption Parabolic springs with maintenance-free steel-rubber bushings and mechanical axle load equalisation (rocker compensation) Wheels and Tyres 235/75 R 17.5 Manufacturer's choice, with M&S marking Steel rims in twin arrangement, factory silver finish Braking System 2-line compressed air braking system Spring-actuated parking brake 2 foolproof coupling heads at the front, with connecting lines to the towing vehicle ABS and ALB, with ABS socket at the front and connecting cable Brand: Wabco or Knorr Note: The trailer may only be towed by vehicles that ensure the proper functioning of the ABS! Electrics 24 Volt, multi-chamber lights, yellow LED side marker lights 2 white position lights at the front 2 white/red lane departure lights at the rear 2x 7-pin foolproof plugs at the front with connecting cable 1 LED beacon with bracket, switched via parking lights (lamp removable) 2 pairs of warning boards, double LED illuminated and extendable to 3,000 mm Floor Front swan neck with steel chequer plate covering Storage box recessed in the approach slope to the swan neck Then 70 mm softwood flooring, in wheel arch area with steel chequer plate Rear slope with 70 mm softwood flooring Low-bed area incl. rear slope 6,500 mm Loading Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Additional ramp safety device, foldable at the bottom (prevents lateral displacement of ramps, not in combination with laterally hydraulic ramp adjustment) Wooden covering Spring-assisted lifting support Operating Instructions At 10,000 kg axle load, a special permit is required, only indivisible loads allowed! The specified total weight is technically possible, but depending on the cargo, the total weight may not be achievable while complying with the permissible axle, support, and king pin loads (poor handling or tracking may result from incorrect load distribution) Country of Registration / Pla

Stanje: novo, največja dovoljena obremenitev: 31.920 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.410 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, New vehicle: Fliegl 4-axle low-loader trailer with ramps, model VTS 400 Gross weight: 24,000 kg / 40,000 kg Unladen weight: 8,080 kg Payload: 15,920 kg / 31,920 kg Overall length: 11,940 mm Loading length: total approx. 10,410 mm; neck approx. 2,490 mm; loading bed incl. rear taper approx. 7,920 mm Width: 2,550 mm Loading height: 900 mm Further information: Plus pre-freight / preparation ex stock 26639 Wiesmoor: €1,280.00 / net Chassis: Low-bed trailer Steel welded construction Turntable with heavy-duty ball race ring Foldable rear support 2 wheel chocks with holders Side underrun protection, aluminium Full-width rear mud flap Half-shell mudguards, 1st and 2nd axles with anti-spray flaps behind each axle, Anti-spray flaps in front of and behind 3rd and 4th axles Excavator stick trough over rear axles to the rear, approx. 1,800 mm long, 650 mm wide, 150 mm deep 2 pairs of lashing holes, each 5 t, in the excavator stick trough on the longitudinal frame, approx. 300 mm from the front and 200 mm in front of the rear slope 1 plastic toolbox, w=600 mm / h=425 mm / d=460 mm, lockable Storage box recessed in the neck floor with lid, w=720 mm / l=520 mm / d=170 mm Hnodoxrx Nlepfx Ag Iel Extendable outriggers to 3,000 mm (not for rear slope) (Track width of construction machinery/vehicles to be transported must not exceed external frame width of 2,550 mm) Storage compartment for wooden planks under the low-bed deck Wooden planks, 70 mm, for extension to 3,000 mm Lashing points, low-loader: 1 pair of lashing cutouts in the front longitudinal beams, embedded in the neck, each 10 t 4 pairs of lashing holes in the outer frame, each 5 t (for attaching ratchet straps) 9 pairs of lashing mushrooms, embedded in and above the outer frame, each 10 t: - 2 × on the neck - 7 × in the low-bed section First lashing point 250 mm from the front, last max. 250 mm from the rear; lashing point spacing max. 1,100 mm Additionally, 3 pairs of folding lashing eyes, each 10 t: - 1 × on the neck (protruding) - 1 × at the start of the low-bed inside the longitudinal beams - 1 × in the floor behind the last axle Drawgear, turntable trailer: Drawbar with certified 50 mm eye Drawbar height adjustment via spring Axles & Suspension: Drum brake axles, per manufacturer’s choice "Axles/chassis laser-aligned" to reduce tire wear and fuel consumption Air suspension with lift & lower valve + auto-reset function Wheels and Tyres: 235 / 75 R 17.5", per manufacturer’s choice Steel twin wheels, factory silver Braking system: 2-line air-operated brake system Spring-loaded parking brake Axle load detection via EBS CAN bus signal for display in truck cab (truck must be equipped accordingly; not a calibrated scale) Vehicle stability system: 2 non-interchangeable coupling heads at the front, connection lines to the tractor 12-24V EBS, electronic braking system with EBS socket at the front, including connecting cable (Knorr brand) Attention: The trailer may only be towed by vehicles that guarantee ABS functionality! Electrics: 12-24V, multi-chamber LED lights, side LED marker lights (yellow), LED license plate lighting (Note: Some towing vehicles may display incorrect errors despite proper function) 2 white front position lights, LED 2 white/red rear lane marker lights, LED 2 × 7-pin non-interchangeable sockets at the front, with connection cable 1 LED rotating beacon with bracket, switchable via sidelights (removable beacon) 2 pairs...

Stanje: novo, največja dovoljena obremenitev: 31.920 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.410 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, New Fliegl 4-Axle Low Loader Trailer with Ramps, Model VTS 400 Gross weight: 24,000kg / 40,000kg Unladen weight: 8,080kg Payload: 15,920kg / 31,920kg Total length: 11,940mm Total loading length: approx. 10,410mm; Gooseneck: approx. 2,490mm; Loading platform incl. rear bevel: approx. 7,920mm Width: 2,550mm Loading height: 900mm Additional information plus delivery/preparation from stock location 26639 Wiesmoor: €1,280.00 net Leasing offer: term 48 months, down payment only VAT, residual value 40% Hedpfx Aovv D Ixeg Isnl Monthly instalment EUR 759.00 Chassis Low Loader Trailer Steel welded construction Turntable with heavy-duty ball-bearing slewing ring Foldable rear support 2 wheel chocks with holders Aluminium side underrun protection Full-width rear spray flap Half-shell mudguards on axle 1 + 2 with anti-spray flaps behind each axle Anti-spray flaps before and behind axles 3 and 4 Excavator arm recess over rear axles, stretching to the rear, approx. 1,800mm long, 650mm wide, 150mm deep 2 pairs of lashing holes (5t each) in the excavator arm recess, side-mounted on the longitudinal frame, approx. 300mm from the front and approx. 200mm before the rear bevel 1 plastic toolbox, w=600mm / h=425mm / d=460mm, lockable Storage box recessed into the gooseneck floor with lid, w=720mm / l=520mm / d=170mm Extendable widenings to 3,000mm (not at rear bevel) (Note: the track width of machines or vehicles being transported must not exceed the outer frame width of 2,550mm) Wooden plank compartment under the low-bed platform 70mm wooden planks for extension to 3,000mm Low loader lashing points 1 pair of lashing cutouts sunk in the longitudinal beam at the front of the gooseneck, 10t each 4 pairs of lashing holes in external frame (5t each, suitable for tension belt attachment) 9 pairs of lashing mushrooms set into the external frame above and on the sides, each 10t 2x front on gooseneck 7x low-bed area 1st lashing point 250mm from front, last max. 250mm from rear, max distance between lashing points 1,100mm 3 additional pairs of folding lashing eyes, 10t each: - 1x on gooseneck (protruding) - 1x inside start of low-bed area in longitudinal beams - 1x recessed in floor behind last axle Towing arrangement, turntable trailer Drawbar with certified 50mm draw eye Drawbar height adjustment via spring Axles & Suspension Drum brake axles, manufacturer’s choice Chassis/axle laser alignment (reduces tyre wear and fuel consumption) Air suspension with raise & lower valve + auto reset function Wheels and tyres 235/75 R 17.5”, manufacturer’s choice Steel twin wheels, factory silver Braking system 2-line pneumatic brake system Spring-loaded parking brake Axle load detection via EBS CAN-Bus signal (for in-cab display, truck must be pre-equipped, not a calibrated scale) Vehicle stability system 2 foolproof coupling heads at the front, with connecting lines to tractor unit 12-24V EBS (Electronic Braking System) with EBS plug at the front and connecting cable (Knorr brand) Note: Trailer must only be towed by towing vehicles capable of ensuring full ABS functionality! Electrics 12-24V, multi-chamber LED lamps, amber LED side markers, LED license plate lighting (Note: On certain tractor units, malfunction messages may appear even if operational) 2 white position lights at the front (LED) 2 white/red contour marker lights at the rear (LED) 2x 7-pin foolproof connectors at the front

Stanje: novo, največja dovoljena obremenitev: 31.100 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.410 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.520 mm, Gross weight: 24,000kg / 40,000kg Curb weight: 8,900kg Payload: 15,100kg / 31,100kg Total length: 11,940mm Loading length: 10,410mm total, 2,490mm gooseneck, 7,920mm loading deck including rear bevel Width: 2,520mm Loading height: 900mm Further information: plus pre-carriage / provision ex stock location 26639 Wiesmoor: €1,280.00 net Steel welded construction Turntable with heavy-duty ball-bearing slewing ring Foldable rear support Wheel chocks with holder Aluminium side underrun protection Rear mudflaps across the full width (not in combination with forklift holder) Half-shell fenders on 1st and 2nd axles with anti-spray mudflaps behind each axle Anti-spray mudflaps in front of and behind 3rd and 4th axles Excavator arm recess over rear axles to the rear, approx. 1,800 mm long, approx. 650 mm wide, approx. 150 mm deep 2 pairs of lashing holes (5 t each) in the excavator recess at the side of the longitudinal frame, approx. 300 mm from the front and approx. 200 mm before the rear bevel 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable 1 storage box embedded in gooseneck floor with lid, W=720 mm / L=520 mm / D=170 mm Extendable width to 3,000 mm (not in rear bevel) (Track width of machines/vehicles to be transported must not exceed outer frame width of 2,550 mm) Storage compartment for timber planks under low-bed platform 70 mm timber for widening to 3,000 mm Low loader lashing eyes 1 pair of lashing cut-outs at the front longitudinal member in gooseneck, each rated 10 t Hnedporducpsfx Ag Isl 4 pairs of lashing holes in the outer frame, each 5 t (lashing strap attachment) 9 pairs of recessed lashing mushrooms in the outer frame, top and side, each 10 t 2 x front on gooseneck 7 x in lowered bed First lashing eye 250 mm from the front, last max. 250 mm from the rear, spacing not greater than 1,100 mm 3 pairs of additional folding lashing eyes, each 10 t: 1 x on gooseneck (protrudes) 1 x at beginning of low bed, recessed in longitudinal rails 1 x behind the last axle, recessed in the floor Trailer tow device Drawbar with certified 50 mm towing eye Drawbar height adjustable by spring Axles & suspension Drum brake axles, manufacturer's choice Axles/chassis laser aligned—reduces tire and fuel wear Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation front and rear (equalisation rocking beams) Wheels and tires 235/75 R 17.5" manufacturer's choice Steel rims in twin configuration, factory silver Braking system 2-line compressed air brake system Spring-loaded parking brake 2 foolproof coupling heads at the front with connection leads to tractor unit 24 Volt ABS and ALB, with ABS connector at front, with connecting cable Note: The trailer may only be towed by tractors supporting ABS function! Electrics 12–24 volt, multi-chamber LED lamps, side yellow LED marker lights, LED license plate lights (note: some tractors may show false diagnostics despite correct function) 2 white position lights at the front, LED 2 white/red lane marker lights at the rear, LED 2 x 7-pin foolproof connectors at the front, with connecting cable 1 LED beacon with holder, switched via position light (removable beacon) 2 pairs of warning plates, double LED illuminated and extendable to 3,000mm Floor Gooseneck front with steel/checker plate covering then approx. 70 mm softwood floor, in the wheel arch area steel/checker plate covering Rear bevel with 70 mm softwood floor A

Stanje: novo, lastna masa: 7.300 kg, največja dovoljena obremenitev: 26.700 kg, skupna masa: 34.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.000 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Šasija: vroče pocinkana, lesen pod s 70 mm debeline, 18 pritrdilnih obročev, 12 žepov za kole, 2 rampi, vsaka dolžine 3.110 mm x 760 mm širine, plezalni trak na zunanji strani ramp in zadnji klančini, hidravlične enodelne rampe, višina nalaganja: 880 mm, vključuje prikazovalnike obremenitve osi. Doplačila: zadnja os kot krmiljena os: 3.500 €, opozorilne table + razsvetljava in rotacijska luč: 200 €, razširitev na 3 m z lesenimi vložki: 300 €, hidravlični premik ramp: 1.000 €. -- Pridržujemo si pravico do napak v tisku, sprememb in dopolnitev, slike so simbolične -- Več podatkov na:! Hnjdpoy Sttbsfx Ag Ijl

Stanje: novo, lastna masa: 7.950 kg, največja dovoljena obremenitev: 37.050 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Ojačana izvedba, zračno ovješena s podiznom osovinom, mjerač osovinskog opterećenja, dužina visokog ležaja cca 4.140 mm, dužina niskog ležaja cca 8.600 mm, visina utovara cca 900 mm, za 2-osovinske i 3-osovinske tegljače, prednji zid cca 1.600 mm visine, 18 x džepovi za rukohvate u vanjskom okviru, 3 x poprečne letve za rukohvate, 24 x vezne ušice, 4 para kontejnerskih bravica za, 2 x 20 ft ISO kontejnera ili 1 x 40 ft ISO kontejner, doplata za alu rampe, cijena: 1.900 €; rezervni kotač, cijena: 300 €; – tiskarske greške, zadržavamo pravo na promjene i pogreške, slike su uzorak – više podataka na:!, više detalja:! Hnedpjy Sn Itjfx Ag Isl

Stanje: novo, lastna masa: 7.460 kg, največja dovoljena obremenitev: 22.540 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.000 mm, širina tovornega prostora: 2.550 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Loading platform length: 9,000 mm, loading height (loaded) approx. 900 mm, 20 lashing eyes, each rated for 10 t, 16 stake pockets in the outer frame, loading ramps (approx. 3,000 x 750 mm), ramps laterally adjustable, spring lifting device for one-piece ramps, 70 mm thick wooden floor, storage box with lid for lashing chains or tension belts, contour marking according to regulations, spring-actuated parking brake, chassis hot-dip galvanized, incl. axle load indicators, Surcharges for: Warning panels with lighting and beacon = Price: €800, widening to 3 m = Price: €1,100, hydraulic one-piece ramps €500, Also available with 8.10 m loading platform length + widened version in stock. -- Subject to misprints, errors, and modifications, Sample images --. More data at: !, More Details: ! Hodpfx Aey Sn Eljg Ionl