Fliegl Dtl 300 3-Achs Tieflader Agrar Greenl. Hydraulik nakup rabljenega (39.924)

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT34202038273, lastna masa: 5.680 kg, največja dovoljena obremenitev: 29.320 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, skupna višina: 2.680 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5", stanje pnevmatik: 100 odstotek, barva: srebrn, Chassis semi low loader for haulage Fine-grained steel welded construction in reinforced Scandic design, fifth wheel plate with replaceable 2" kingpin Outer frame in low loader design: 7 pairs of lashing mushrooms recessed at the top and side in the outer frame, each rated for 10 t 10 pairs of combined stake pockets with lashing rings (bolted), each rated for 5 t, recessed in outer frame, approx. 72 x 42 mm inner dimensions Outer frame with "Load-Lock profile" for fitting tensioning straps, approx. one hole every 400mm 24 t, 2-speed landing leg with single-sided operation Free swing radius to landing foot approx. 2,500 mm, landing foot width approx. 2,600 mm Extension ladder at rear 2 wheel chocks with holders Side underrun protection, aluminium Rear underrun protection, galvanized steel Spray flaps at the rear over entire width Quarter mudguards in front of and behind axle assembly With antispray mudflap only on rearmost axle 2 plastic toolboxes, w=600 / h=425 / d=460 mm, lockable In front of axles, 1x left, 1x right 1 storage box, full width, closed, beneath loading floor, approx. w=450 mm/h=400 mm/d=2,460 mm, mounted directly in front of axles 3 tie-down/stake rails with 4 pairs of locking cut-outs, recessed transversely in floor over total width up to outer frame (max. usable internal width between outer stanchions approx. 1,782 mm), approx. 80 mm high. With cut-outs at top and bottom for lashing and fitting stakes 80 x 80 mm. Bottom with angled plate as stop, half open downward. Combined design for 2 x 20 ft or 1 x 40 ft container, 4 pairs of container lock adapters 10 combined plug-in stakes with cut-out at bottom, w=80/ d=50/ l=1,200 mm 6 plug-in stakes w=80/ d=80/ l=1,200 mm, hot-dip galvanized Axles and Suspension BPW disc brake axles with 430 mm disc diameter Air suspension 1st axle auto lift, additionally electrically operable from tractor, including forced lowering and start aid Braking system 2-line compressed air braking system Spring-type parking brake 2 non-interchangeable couplings at front 24V EBS, electronic braking system with EBS socket at front Note: Towed vehicle may only be towed by towing vehicles that guarantee proper functioning of ABS! with raise & lower valve + auto-reset function Vehicle Stability Control System Axle load detection via EBS CAN bus signal, display in driver’s cab Wheels and Tyres 385/65 R22.5" Steel rims "TPMS" tyre pressure monitoring system according to ECE R 141, display via towing vehicle, through EBS Electrics 24 Volt, multi-chamber lamps, side yellow LED marker lights Side yellow LED marker lights linked with indicator “flashing side markers” 2 white LED position lights at front 2 white/red lane marker lights at rear 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at front 2 additional LED work lights, at rear 1 LED beacon with mounting bracket 2 pairs of LED illuminated warning signs, extendable to 3,000 mm 2 additional LED worklights, top of front wall Additional 7-pin socket in rear underrun guard Floor Slip-resistant screen printing panels approx. 30 mm thick, for high point load, suitable for forklift wheel loads up to max. 7,900 kg "Premium floor sealing", circumferentially sealed joints Front wall / corner posts 25 mm aluminium hollow profile, 1,350 mm high, corner posts steel, volume design Front wall additionally lined inside with 1,250 mm high phenolic plywood "Crash Blocker", bottom inside at approx. 140 mm high, with steel impact protection Dodpfxjzbbpus Aklskn

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902036248, lastna masa: 7.272 kg, največja dovoljena obremenitev: 27.728 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.460 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.655 mm, prostornina tovornega prostora: 92 m³, skupna dolžina: 13.800 mm, skupna širina: 2.550 mm, skupna višina: 4.005 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R22,5", stanje pnevmatik: 100 odstotek, Monocoque colour: single tone, RAL shade freely selectable Chassis: Semitrailer for forwarding/logistics applications Fine-grain steel welded construction in lightweight design, all the way to the support legs; fifth wheel plate with interchangeable 2" kingpin 24 t, 2-speed landing gear, single-sided operation Extension ladder at rear Side-mounted door retainers Foldable splash guard for lighting unit Rear underrun protection Dedpfx Asza S E Rjklokn 1 aluminium ladder approx. 3,550 mm, side-mounted holder 1 plastic toolbox, width=600 / height=425 / depth=460 mm, lockable Axles & Suspension BPW disc brake axles with 430 mm disc diameter Air suspension, first axle with automatic lift axle function, including forced lowering and starting aid, actuation via "3x braking" Braking System 2-line compressed air brake system Spring-actuated parking brake 2 non-interchangeable coupling heads at front 24 Volt EBS (Electronic Braking System) with EBS socket at front Note: The trailer may only be towed by vehicles that ensure ABS effectiveness! With raise/lower valve Vehicle stability control system "TPMS" Tyre Pressure Monitoring System per ECE R 141, display in towing vehicle via EBS 1 additional air connection, front left/rear, with quick-release coupling Wheels and Tyres 385/55 R22.5" make as per manufacturer’s choice Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED lighting Side yellow LED lamps linked to indicators ("flashing side markers") 2 white front position lights in LED 2 white/red lane marking lights at the rear 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connecting cable 2 additional LED work lights at the rear, switched via reverse light Sliding Floor Hydraulic System Hydraulic cylinder with sliding device installed in floor. Dual-circuit hydraulic system. Electric shifting for forward/reverse via wired remote control Operation hydraulically via truck PTO Hydraulic connection with hose at front wall and HDK threaded connector NW = 48 mm Sliding Floor (SB) Sliding floor with wear plate at rear Floor boards made of aluminium, 8 mm profile, grooved design Body (Monocoque, SB/Bin) Aluminium box body made of high-grade, wear-resistant material. Front and side walls from aluminium hollow profiles, top edge all around made from welded, wide special aluminium reinforcement profile, bottom with welded-in special frame. Moving bulkhead wall for improved unloading of cargo, with reinforced tarpaulin skirts at the bottom. Rear wall of aluminium hollow profile as double-leaf door, split 1/2 to 1/2, all-round special U-profile with stop and rubber seal, two external rotary bolt locks, locked at top and bottom. Rear wall with mechanical safety lock; operation at rear, left in direction of travel Standing platform with double-sided ladder access (left/right in direction of travel) and railing, for opening and closing the sliding roof tarpaulin 3 removable and swivelling cross bows for tarpaulin support + tarpaulin supports front at headboard and rear at tailgate Paintwork Frame: DB 7350 Nova grey "10 years anti-perforation warranty" Support legs: black coated Body: natural aluminium – can be painted any RAL colour as per customer request Roll tarpaulin: not yet installed

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33901014072, lastna masa: 7.300 kg, največja dovoljena obremenitev: 27.700 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.530 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, skupna višina: 3.330 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22,5", stanje pnevmatik: 100 odstotek, barva: srebrn, Chassis Semi-Trailer for Freight Forwarding Fine-grain steel welded construction in lightweight design, fifth wheel plate with replaceable 2" king pin, main frame reinforced for 25 t at the center of gravity over 3 m loading length in retracted condition 13 pairs of welded hooks on cross members for lashing strap attachment 23 pairs of recessed lashing rings in the outer frame, each rated 3.5 t 24 t 2-speed landing gear in reinforced version for uncoupling when loaded, single-side operation 1 spare wheel holder for 1 spare wheel 1 open storage compartment for stakes, with insertion option behind front wall for storage / or storage in compartment between extended main beams 4 pairs of recessed stake pockets in the outer frame, for square tubes 80x80 mm 5 stake pockets recessed centrally in the floor, for square tubes 80x80 mm, with reinforcement beams, each installed between the outer stake pockets except one 6 lashing/stake rails recessed crosswise in the floor over the full width to the outer frame (max. usable internal width between outer stake pockets approx. 2170 mm), approx. 100 mm high. With 20 mm round steel bars, top and bottom, distance between top and bottom approx. 60 mm (of the round steel). Bottom closed with angle plate, half open downwards. For lashing and plugging stakes, 80 x 80 mm. Rear pull-out ladder on right side in travel direction (FR) 5 x 3 pairs of stake pockets recessed in the outer sides of the main beams, for square tubes 80x80 mm, incl. reinforcement beams 10 “lightweight” plug-in stakes, W=80/D=80 mm, usable height approx. 1850 mm, hot-dip galvanized, with welded lashing points on both ends 2 plastic toolboxes, W=600 / H=425 / D=460 mm, lockable Telescoping Extendable by max. 4,000 mm, lockable at approx. every 500 mm Main frame telescopic Locking with pneumatic pin system + frame lock indicator on both sides, operated via hand button; control for brake/lock and suspension on left in travel direction (FR-left) in front of the axles Storage compartment between the main beams when extended Axles & Suspension SAF disc brake axles with 430 mm disc diameter Last axle is steered, with automatic reverse lock via reversing light and additional lock function on vehicle via hand button Axle spacing offset 1310/1410 mm Air suspension 1st axle with automatic lift, additionally electrically controllable from the truck, with start assist Braking System 2-line compressed air braking system Spring-loaded parking brake 2 anti-mix-up coupling heads at front EBS Wabco, electronic braking system with EBS socket at front With raise & lower valve + auto-reset function Axle load detection via EBS CAN bus signal, for display in cab (truck must be equipped accordingly) Wheels & Tyres Dedpfx Aeza Dyysklokn 385/65 R 22.5" steel rims Electrics 24 Volt, multi-chamber tail lights, side yellow LED lighting 2 white LED position lights at front 2 white/red LED lane guidance lights at rear 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at front 1 beacon with bracket, switchable via parking light 2 pairs of warning panels, LED illuminated and extendable to 3,500 mm Flashing side marker lights Side 7-pin sockets, positioned 2x at front panel, 2x at landing gear, 2x at rear underrun protection 1 additional 7-pin socket in the rear underrun protection 2 additional LED work lights, mounted top inside at front wall, with switch on front wall outside, left in travel direction (FR-left) Screen-printed wooden flooring approx. 30 mm thick 25 mm aluminium hol

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33901014200, lastna masa: 6.700 kg, največja dovoljena obremenitev: 28.300 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, višina nakladalnega prostora: 900 mm, skupna dolžina: 13.800 mm, skupna širina: 2.550 mm, skupna višina: 2.500 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, barva: sivo-črna, Chassis, semi-trailer, forwarding version Fine-grain steel welded construction, fifth wheel plate with replaceable 2" king pin Outer frame slightly chamfered, new design with "Load-Lock profile" for securing strap hooks 24 t, 2-speed landing gear, single-sided operation, with straight base, without telescopic adjustment Free landing leg corner dimension or free rear swing radius approx. 1920 mm 2 wheel chocks with holders Side underrun protection, aluminium Rear underrun protection, steel Quarter-shell mudguards in front of and behind each axle Spray flaps in front of the 1st axle and behind each axle with anti-spray, according to EC 1 lockable plastic toolbox, w=600 / h=425 / d=460 mm (lock not included) Axles + Suspension SAF drum brake axles "Axles/chassis laser alignment" reduces tyre wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and start assist, operated by "3x braking" (start assist is active up to a 30% overload on the axle and up to a maximum speed of 25 km/h) Axle lift below recommended driving height, therefore no warranty for tyre damage Brake system 2-line compressed-air brake system Colour-coded line routing for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be towed by tractors that ensure the effectiveness of the ABS! With raise & lower valve Vehicle dynamic stability system Wheels and tyres 235/75 R17.5, brand according to manufacturer's choice Steel rims, factory silver Electrics 24 V, multi-chamber lamps, yellow LED side marker lamps 2 white marker lamps at the front 2 white/red lane marker lamps at the rear 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, without connecting cable Floor Dodpfx Akoza A Txslokn Phenolic plywood approx. 30 mm thick, for high point load capacity, suitable for forklift axle load up to max. 5,600 kg Front wall / front corner posts 25 mm aluminium hollow section, 1,350 mm high, front corner posts in steel, volume design Country of registration / plates Germany With Dekra inspection and certificate (according to §13 EC FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame: DB 7350 Novagrau Front corner posts: hot-dip galvanized Front wall: aluminium

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902028859, lastna masa: 5.660 kg, največja dovoljena obremenitev: 29.340 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 13.700 mm, skupna širina: 2.550 mm, skupna višina: 3.700 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", stanje pnevmatik: 100 odstotek, barva: rdeča, Chassis Semi-Trailer for Freight Forwarding Steel welded construction in reinforced design, only two longitudinal beams as double T-beams with steel/checker plate between the beams. Fifth wheel plate with replaceable 2" king pin. Protective cover for rear lights. 8 pairs of lashing rings, bolted or welded to the frame as per manufacturer’s choice. 24 t two-speed landing gear, single-sided operation, with straight base, without compensating leg. Wheel chocks with holders. Side underrun protection in aluminium. Rear underrun protection in galvanized steel. Half-shell mudguards with anti-spray flaps according to EC specifications. 1 spare wheel holder for 1 spare wheel, incl. wheel fixing kit. 1 toolbox recessed between the longitudinal beams. 8 wooden stake pockets, as per manufacturer’s preference, bolted onto the frame, each with 2 telescopic wooden stakes adjustable from 1800 mm to 2800 mm, 7 t per pair. Axles + Suspension BPW disc brake axles with 430 mm disc diameter. Air suspension with lift & lower valve, axle safety cables. First axle with automatic lift, incl. forced lowering and start assist, activated by “3x brake” (start assist functions up to 30% axle overload and up to 25 km/h). Axle spacing offset 1410/1310 mm (suitable for combined transport) up to 44 t gross train weight. Wheels and Tyres 385/65 R 22.5" Manufacturer’s choice. Steel rims, factory silver. Brake System 2-line compressed air brake system. Spring-type parking brake. Axle load detection via EBS CAN-bus signal for display in truck cab (truck must be equipped accordingly, no truck installation, not a verified scale). 2 front coupling heads, non-interchangeable, without connection line. EBS (Electronic Braking System) with front EBS socket, without connecting cable. Note: The trailer may only be towed by tractors that can guarantee ABS effectiveness! “Safe Parking.” Electrical System 24 Volt, multi-chamber tail lights, side LED marker lamps in yellow. 2 white position lamps front. 2 white/red lane-control lamps rear. 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connection cables. Front Bulkhead/Corners Steel/mesh bulkhead, approx. 2,300 mm high, bolted to frame. Approval / Signage Registration country: Germany Type approval according to EC 2007/46 Prepared for single-row license plate holder Dodpfx Aoza Anvjklekn Contour marking with reflective tape per ECE R 048, white on sides, red at rear Warning sign per ECE-70 Paintwork Frame: DB 7350 Novagrau Landing gear legs: black coated Bulkhead: hot-dip galvanized

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33801013475, lastna masa: 7.180 kg, največja dovoljena obremenitev: 28.820 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, barva: srebrn, Available in multiple units. Fine-grain steel welded construction, saddle plate with replaceable 2" kingpin, additional splash guard made from sheet metal riveted to the underside floor, in the gooseneck area above the rear axle of the tractor unit as well as above the wheels on the vehicle. Reinforced frame version for vehicle loads up to the outer frame. Outer frame equipped with "Load-Lock profile" approx. every 400 mm for lashing strap attachment, 10 pairs of lashing mushrooms recessed into the outer frame, each rated at 10 tons, 24 ton 2-speed landing gear, single-sided operation, with semi-rounded lower section and straight connection plate, featuring load compensation, foldable rear support, wheel chocks with holder, aluminum side underrun protection, steel underrun protection, quarter-fender mudguards in front of and behind each axle, with additional sheet splash guards over the wheels, fitted with anti-spray mud flaps according to EC standards, 1 plastic toolbox (600 x 425 x 460 mm), lockable. Container locks: 4 pairs of locking recesses embedded in the floor for 2 x 20-foot or 1 x 40-foot container, 4 pairs of container locking adapters (additional cross supports at the front and rear of the container required; the container must be evenly supported across the width; cross supports not included). Ramp attachment bar at rear extension across full width, mechanical rear extension with hand crank extendable by approx. 1,500 mm, lockable every 500 mm, includes extendable underrun protection with lighting. Lane area fitted with Lohr perforated sheet, central area with steel checker plate, storage space for drive-on ramps integrated in rear extension—usable only when rear extension is extended by approximately 1000 mm. For ramp transport with retracted rear extension, ramp storage is located on the right in front of the axles. One pair of ramps, 3,000 mm long, 300 mm wide, load capacity per pair 6,000 kg. Electric cable winch, 24 volts, pulling force approx. 8,165 kg, centrally mounted at the very front, operated by remote control, cable length 35 m x approx. 10 mm, with roller cable window and removable guide rollers. Dkodpsza Aiyofx Aklen Axles & Suspension: SAF or BPW drum-braked axles as selected by the manufacturer, air suspension, first axle with automatic lift axle, additionally electrically operable from the truck, including forced lowering and drive assist. Brake system: 2-line compressed air brake system, color-coded line routing for easy service, spring-loaded parking brake, 2 fail-safe coupling heads at the front, EBS (electronic braking system) with EBS socket at the front (no connection cable provided), with raise & lower valve and fast venting, hold function in lowered position + auto-reset function, vehicle stability system, axle load detection via EBS CAN bus signal. Wheels & Tires: 235 / 75 R 17.5" — brand per manufacturer's choice, twin-mounted steel rims. Electrics: 24 volts, LED multi-chamber lights, side yellow LED lighting, license plate lighting in LED, 2 white position lights at the front in LED, 2 white/red lane marker lights at the rear in LED, 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, 2 additional LED work lights at the rear, 1 rotating beacon with holder, operated via parking light, 2 pairs of double LED-illuminated warning panels extendable to 3,000 mm, 1 additional 7-pin socket (ISO 1724) in the rear underrun protection, 2 side LED work lights (1 each on front left and right). Floor: Lohr perforated stee

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33801012811, lastna masa: 6.350 kg, največja dovoljena obremenitev: 28.650 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 435/50 R19,5", stanje pnevmatik: 100 odstotek, barva: srebrn, multiple units available Chassis fifth wheel forwarding: Fine-grain steel welded construction, fifth wheel plate with replaceable 2" king pin, reinforced frame for vehicle loading, outer frame with "Load-Lock profile" every approx. 400 mm for lashing strap hooks, 10 pairs of lashing mushrooms recessed on top/outside of the outer frame, each rated at 10 t, foldable rear support, 2 wheel chocks with holders, aluminum side underrun protection, galvanized steel rear underrun protection, quarter mudguards in front of 1st axle and behind each axle, with anti-spray flaps behind each axle, 1 spare wheel holder for 1 single wheel, incl. wheel mounting kit, 2 lockable plastic toolboxes, w=600 / h=425 / d=460 mm, container locks: 4 pairs of locks recessed in the floor for 2 x 20 ft or 1 x 40 ft container, front-most position is a recessed fold-down lock, 10 pairs of stanchion pockets recessed in the outer frame, 70 x 40 mm internal dimension, 10 stanchion pockets recessed centrally in the floor, 70 x 40 mm internal dimension, 2 cross tie-down/stanchion rails recessed into the floor spanning the full width to the outer frame (approx. max usable interior width between external stake pockets 2170 mm), about 100 mm high. Includes 20 mm round steel rails at top and bottom, spacing about 60 mm (between rails); bottom end with angled sheet as closure, open downwards halfway. For lashing and inserting stakes up to 80 x 80 mm. Arrangement: Positions 2 and 4 according to Fliegl data sheet, 20 removable stakes, hot-dip galvanized, storage space for aluminium drive-on ramps, ramps can be inserted from the rear, 3 pairs of fold-down lashing points (10 t) in outer frame (1x in front of front wall and 2x at the rear) Axles & Suspension: SAF disc brake axles, air suspension, 1st axle with automatic lift axle, includes forced lowering and start assist, actuated by "brake 3x", axle lift below recommended driving height, therefore no warranty for tire damage Dkodpfxsza Agrj Akljn Brake system: 2-line compressed air brake system, color-coded routing for easy service, spring-type parking brake, 2 fail-safe coupling heads at front, no connecting line, EBS, electronic braking system with EBS socket at front, no connection cable, with raise & lower valve, 2 driving heights adjustable via manual knob: 1x for coupling height 980 mm, 1x for coupling height 1100 mm, ride height in combination with lift axle; when lift axle is raised, load/overall height increases by 50 mm, vehicle stability control system Wheels and tires: 435/50 R19.5, brand at manufacturer's discretion, steel rims Electrics: 24V, multi-chamber lights, yellow LED side lighting, 2 white LED position lights at the front, 2 white/red lane marker lights at the rear, 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, LED work lights: 1x each left/right in front frame, 2 additional LED work lights at rear, 1 rotating beacon with holder, switched via parking lights, 2 pairs of warning panels: LED-illuminated and extendable to 4,000 mm, additional 7-pin socket at rear underrun protection Floor: phenolic plywood, approx. 30 mm thick, on longitudinal beams for high point loading, suitable for forklift axle load up to max. 7,100 kg Front wall / corner stanchions: 25 mm aluminum hollow section, 1,350 mm high, steel corner stanchions in volume version, front wall inside also lined with 1,250 mm phenolic plywood, "Crash-Blocker", lower 140 mm inside with steel impact protection, storage compartment for insertable stanchions insi

Stanje: rabljeno, največja dovoljena obremenitev: 30.400 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2019, prostornina tovornega prostora: 25 m³, Oprema: ABS, * 4956 - ID vozila za telefonska povpraševanja * ABS, SAF osi, kolutne zavore, zračno vzmetenje dviganje + spuščanje, dvižna os, izpustne podpore, zložljiva zaščita proti podletu, rolo ponjava, alu platišča, podest, prekucni sistem * Pnevmatske gume prva os: 385/65R22,5 (4 / 2 mm) Djdpfxey U S Sno Akljkn * Pnevmatske gume druga os: 385/65R22,5 (2 / 2 mm) * Pnevmatske gume tretja os: 385/65R22,5 (4 / 9 mm) ----naš e-poštni naslov:     naša storitev za vas:       - pridobitev začasnih ali carinskih tablic       - prevoz / dostava po EU       - carinjenje vozil v tretje države Če imate vprašanja v ruščini, lahko pokličete na naslednjo številko * WhatsApp samo za rusko govoreče: * WhatsApp za angleščino, nemščino in druge jezike:

Stanje: rabljeno, Funkcionalnost: omejena funkcionalnost, lastna masa: 6.575 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 07/2011, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 1.300 mm, skupna dolžina: 13.650 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65R22,5, stanje pnevmatik: 30 odstotek, medosna razdalja: 1.360 mm, Leto izdelave: 2011, Oprema: ABS, Rabljen odprt polpriklopnik Jeklena sprednja stena z izbočenjem za dolge jeklene profile Tla okrepljena z jeklenimi profili Dkjdpfx Asy Ercbskljn Stranski žepki za stebričke Skladiščna škatla za vstavljive stebričke

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902030381, lastna masa: 5.960 kg, največja dovoljena obremenitev: 29.040 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2022, naslednji pregled (TÜV): 03/2027, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.740 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", barva: črn, The images shown are archive photos; the vehicle may still be in use! Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin, outer frame slightly angled with "Load-Lock profile" for securing straps, rated at 24 tons. Two-speed landing gear with single-side operation, straight bottom section, without sliding compensation. Note: Free supporting leg corner measurement or free rear swing radius approx. 1930 mm without supports. Rear extension ladder, side mounted door retainers, pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm. Rear impact guard, "Blocker" crosswise galvanized steel angle as forklift and hinge protection, pallet stop on both sides approx. 15-20 mm high in bolted design; loading height is reduced by approx. 15–20 mm. Axles & Suspension: SAF disc brake axles with 430 mm disc diameter, "axle/chassis laser alignment" to reduce tire wear and fuel consumption. Air suspension, without lift axle. Brake System: 2-line compressed air braking system, color-coded hose layout for easy maintenance. Spring-loaded parking brake. 2 non-interchangeable coupling heads at the front, without connecting line. EBS system from Haldex: electronic braking system with EBS socket at the front, without connecting cable, with raise & lower valve. Vehicle stability system, brake pad wear indicator via EBS CAN bus signal (display through driver’s cab dashboard; truck must be pre-equipped), axle load detection via EBS CAN bus signal (display through dashboard; truck must be pre-equipped), no truck installation (not a certified scale). TPMS (Tire Pressure Monitoring System) Haldex via EBS, without truck installation (truck must be suitably equipped). Electrics: 24 Volt, LED multi-chamber lights with resistor, yellow LED side marker lights, LED license plate lights. 2 white position lights at front, 2 white/red lane marker lamps at rear. 1 x 15-pin socket at front, without connection cable. Additional LED work light at the rear, controlled via reverse light. Floor: Screen printing plates approx. 30 mm thick, on longitudinal crossmembers for high point-load capacity (forklift axle load up to max. 7100 kg). Dedpjy Tvwxefx Aklokn Body: Body assembled. Front wall / front corner posts: Height 2580 mm, steel corner posts in high-volume design, release device for curtain side at front wall. "Crash blocker" steel impact protection inside bottom at approx. 140 mm height. Centre posts: 2 pairs of sliding posts, movable along the entire length, with 4 fold-in pockets and long bottom pocket. 2 pairs of post positions. Slats: 5 rows of aluminum V-insert slats. Rear wall / rear corner posts: Rear steel corner posts up to roof bottom edge, curtain runner with round pipe and ratchet tensioner. Rear portal doors, double-wing, each with 2 internal locking rods. Curtainside: Curtain with welded-in horizontal and vertical straps, tension locks made of stainless steel. Roof: Sliding roof, end lift at rear foldable, cover slidable from rear to front, L-roof rail for automotive industry, interior width between roof rails approx. 2490 mm, curtain color: white, non-elastic roof, minimal roof rail deflection during loading/unloading, anti-ice system with single central hose and automatic forced ventilation through brake light. Optimal rear rain guard, upper end rail above doors.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902030382, lastna masa: 5.960 kg, največja dovoljena obremenitev: 29.040 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2022, naslednji pregled (TÜV): 03/2027, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.740 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5, The images shown are archive images; the vehicle may still be in operation! Tarpaulin color freely selectable Fine-grained steel welded construction, fifth wheel plate with replaceable 2" king pin, exterior frame slightly angled with "Load-Lock profile" for lashing strap hooks. Note: In order to hook straps in combination with drop sides, the sides must be opened! 24-ton, two-speed landing gear, single-sided operation without support legs, pull-out ladder at the rear, wheel chocks with holder, pallet box for 32 Euro pallets. Loading height is reduced by approx. 15-20 mm Axles & Suspension SAF disc brake axles with 430 mm disc diameter, "axles/chassis laser-aligned" to reduce tire wear and fuel consumption; air suspension, without lift axle Brake System 2-line compressed air brake system with color-coded lines for easy servicing. Spring-loaded parking brake 2 foolproof coupling heads at the front (no connecting line), EBS by Haldex, Electronic Braking System with EBS socket at the front, no connection cable, Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system, brake pad wear indicator via EBS-CAN bus signal for display on the cab monitor (truck must be appropriately equipped), axle load detection via EBS-CAN bus signal for display on the cab monitor (truck must be appropriately equipped); no truck installation (not a calibrated scale) Tire pressure monitoring system (TPMS) Haldex via EBS, without truck installation (truck must be pre-equipped) Dsdpfx Asy Tt Sysklskn Electrical System 24 Volt, multi-chamber LED lights with resistor, yellow LED side marker lights, LED license plate lighting (note: certain tractors may produce error messages even though operation is guaranteed) 2 white position lights (front), 2 white/red lane marker lights (rear), 1 x 15-pin socket (front) without connection cable, additional LED work lamp at the rear operated via reverse light Floor Approx. 30 mm thick phenolic plywood floor on long longitudinal beams for high point load capacity, suitable for forklift axle loads up to max. 7,100 kg Front Bulkhead / Front Corner Posts 2,580 mm high, steel corner posts in high-volume design, release device for side curtain at bulkhead, "Crash-Blocker," lower interior reinforced with steel ram protection at approx. 140 mm height Center Posts: 2 pairs of sliding stakes, adjustable throughout the length, with fourfold stake pockets and long pocket at the bottom. Multiple stake positions Insert slats: 5 rows of aluminum V-insert slats Rear Wall / Rear Corner Posts Steel rear corner posts up to lower roof edge, hoop for curtain with round tube and curtain tensioner ratchet Rear portal doors, 2-winged with two internal locking rods each Tarpaulin: Tarp with welded horizontal and vertical belts, tension closures in stainless steel, single-color tarp as desired Roof: Sliding roof, rear end lift-up, roof slides from back to front, L-roof rail for automotive industry, internal width between roof rails approx. 2,490 mm, tarpaulin color: white. Non-elastic roof, minimal roof beam deflection during loading and unloading, anti-ice system with 1 hose in the center, automatic forced ventilation via brake light (not available with front-opening sliding roof); optimized rain gutter at rear on the end hoop above the doors

Stanje: rabljeno, številka stroja/vozila: WFDFLT33901007921, lastna masa: 9.000 kg, največja dovoljena obremenitev: 26.000 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2018, naslednji pregled (TÜV): 02/2027, dolžina tovornega prostora: 15.150 mm, širina tovornega prostora: 2.480 mm, skupna dolžina: 15.350 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", barva: črn, Attention, the images shown are archive photos! The vehicle may currently be in use! Weights and Dimensions: Permissible/Technical Gross Weight: 35,000 / 39,000 kg Permissible/Technical Payload approx.: 26,000 / 30,000 kg Permissible/Technical Axle Load: 24,000 / 27,000 kg Permissible/Technical Kingpin Load: 11,000 / 12,000 kg Unladen Weight approx.: 9,000 kg +/- build tolerance Overall length approx.: 13,850 + 1,500 mm Overall width max.: 2,550 mm Overall height approx.: 3,200 mm Dkjdpfx Akjy Slp Ielon Internal length approx.: 13,650 + 1,500 mm Neck length approx.: 4,050 mm Low bed length approx.: 9,600 + 1,500 mm Internal width approx.: 2,480 mm Loading height (low bed) approx.: 900 mm Fifth wheel height approx.: 1,150 mm Kingpin mounting dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis | Fifth-Wheel Platform Haulage Fine-grained steel welded construction, fifth wheel plate with replaceable 2" kingpin Lashing rings recessed into outer frame, each rated at 2.5 t 24 t, 2-speed landing gear, single-sided operation, with straight lower section, no lateral compensation Wheel chocks with holder Side underrun protection, aluminium Rear underrun protection, steel Quarter-shell mudguards in front of 1st axle and behind each axle With anti-spray mudflaps behind each axle Rear collision guard Plastic toolbox with drawer and shelf, w=650 / h=520 / d=670 mm Document box, front bulkhead mounted Telescoping Central tube frame made of cleanly welded, interlocking telescopic frame sections. Extendable by max. 1,500 mm and lockable after approx. 1,500 mm, outer frame sections approx. 1,500 mm long for insertion into the outer frame when extended Locking by mechanical pin locking Axles & Suspension SAF drum brake axles Air suspension Brake System 2-line compressed air brake system Spring-loaded parking brake 2 error-proof coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connection cable Note: This trailer may only be towed by tractors that ensure the effectiveness of the ABS! With lift & lower valve Wheels & Tires 235 / 75 R 17.5 Steel twin wheels, factory silver Electrics 24 Volt, multi-chamber rear lights, lateral LED marker lights (yellow) 2 white position lights at the front 2 white/red lane marking lights at the rear 2 x 7-pin error-proof sockets at the front, without connection cable Rotating beacon with holder, controlled via parking light (lamp removable) Floor Non-slip phenolic plywood panels approx. 30 mm thick, for high point load capacity, suitable for forklift axle loads up to max. 7,100 kg Where required in wheel arch areas: steel/chequer plate covering Bulkhead/Front Stakes 25 mm aluminium hollow section, 1,950 mm high, steel front stakes, full height in heavy duty design Certification / Signage With Dekra inspection and appraisal Prepared for single-line license plate holder Warning sign according to ECE - 70 Contour marking with reflective tape according to ECE R 048, lateral white and rear red Attention, the images shown are archive photos! The vehicle may currently be in use!

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33903000364, lastna masa: 6.120 kg, največja dovoljena obremenitev: 28.880 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2022, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, skupna dolžina: 13.800 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", barva: srebrn, Attention: The images are archive photos! The vehicle may currently be in use! Weights and Dimensions: Permissible/technical gross weight: 35,000 / 39,000 kg Permissible/technical payload approx.: 28,880 / 32,880 kg Permissible/technical aggregate load: 24,000 / 27,000 kg Permissible/technical fifth wheel load: 11,000 / 12,000 kg Unladen weight (basic version) approx.: 6,120 kg +/- build tolerance Overall length approx.: 13,800 mm Max. overall width: 2,550 mm Overall height approx.: 2,388 mm Gooseneck length approx.: 4,050 mm Low-bed length approx.: 9,600 mm Loading height in low-bed, loaded approx.: 900 mm Internal width approx.: 2,480 mm Fifth wheel height approx.: 950 mm King pin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis semi-trailer for haulage company Fine-grained steel welded construction, fifth wheel plate with replaceable 2" king pin Telescoping at the beginning of the low-bed extendable by approx. 1,500 mm, lockable every 500 mm Slightly sloped new outer frame design with "Load-Lock profile" for securing lashing straps "Patented Load-Lock-Cross" for attaching lashing straps, mounted on the crossmember underneath the outer frame 24 t two-speed landing gear, single-sided operation, with straight lower section, without load equalizer Free landing leg corner dimension or free rear swiveling radius of approx. 1,920 mm Side underrun protection: aluminum Rear underrun protection: steel Quarter shell mudguards 9 pairs of lashing/ stanchion rails recessed across the floor up to the main frame, approx. 100 mm high. With 20 mm round steel bars top and bottom, spacing between bars approx. 60 mm. Bottom with angle plate as closure, half open downwards. For securing and inserting stanchions 80 x 80 mm (3 pairs in gooseneck, 6 pairs in low-bed area) 3 pairs of stake pockets recessed in the outer frame, internal dimension approx. 72 x 42 mm Axles & Suspension: Drum brake axles as per manufacturer’s choice "Laser-measured axles/chassis" for reduced tire and fuel consumption Air suspension Brake system: 2-line compressed air braking system Color-coded piping for easy service Spring-loaded parking brake 2 foolproof coupling heads at the front, without connecting line Dsdpfxjy Slhqj Aklskn EBS electronic braking system, EBS socket at front, no connecting cable Note: The trailer must only be towed by tractor units that guarantee the effectiveness of the ABS! With lift and lower valve Vehicle stability system Wheels and Tires: 235/75 R17.5, manufacturer at the buyer’s discretion Steel rims, factory silver Electrics: 24 volt, multi-chamber lights, yellow LED side lighting (recessed inward) 2 white position lights front 2 white/red lane marker lights rear 2 x 7-pin foolproof sockets at the front, no connecting cable 1 additional LED work light at rear, switched via reverse light Floor: Approximately 30 mm thick anti-slip plywood, high point load capacity, suitable for forklift axle loads up to max. 5,600 kg Front wall / front corner stanchions: 25 mm aluminum hollow profile, 1,350 mm high Country of registration / plates: Germany Inspection and certificate in Bosnia 24/7 service hotline Prepared for single-row license plate holder Contour marking with reflective tape in accordance with ECE R 048, white on the sides, red at the rear Warning sign according to ECE 70 Painting: Frame: hot-dip galvanized incl. passivation “15-year guarantee against corrosion perforation” Front corner pillars: hot-dip galvanized Front wa

Stanje: rabljeno, največja dovoljena obremenitev: 31.410 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2021, naslednji pregled (TÜV): 08/2026, prostornina tovornega prostora: 92 m³, skupna širina: 2.550 mm, Leto izdelave: 2020, Oprema: ABS, Celoten naš vozni park z vozili, ki so na voljo takoj ali v kratkem času, najdete na naši spletni strani. Djdpfx Aksw Tpr Uslskn Izvleček opreme. Celoten seznam opreme je na voljo na zahtevo. - 3 x SAF osi - Kolutne zavore - 1. os z avtomatskim dvižnim mostom - Zračno vzmetenje - 24 t, dvostopenjska podporna noga, enostransko upravljanje - Izvlečna lestev zadaj - Plastična orodna skrinja s predalom in vmesno polico - Dvocevni pnevmatski zavorni sistem, EBS/ABS - Pnevmatske gume 385/55 R22.5 - Pomikajoča tla Cargo Floor, približno 10 mm talni profil - Zadnja stena iz aluminijastih votlih profilov, dvokrilna vrata - LED delovne luči - Barvanje okvirja v DB 7350 Novagrau - Barvanje kesona v RAL 7035 svetlo sivo - Ponjava v barvi podobni RAL 3002 karmin rdeča

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902037031, lastna masa: 4.795 kg, največja dovoljena obremenitev: 30.320 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2025, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 1.450 mm, prostornina tovornega prostora: 25 m³, skupna dolžina: 8.600 mm, skupna širina: 2.550 mm, skupna višina: 3.040 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5", barva: siv, These images are archive photos! The vehicle may still be in use! Fine-grain steel welded construction in basic lightweight design, fifth wheel plate with interchangeable 2" kingpin, Curved front closure, patented 24-ton, 2-speed landing gear, single-side operation, with semi-circular base and straight mounting plate, with thrust compensation Wheel chocks with holders Foldable underrun protection Half-shell fenders Integrated mudguard bracket, stone-repellent finish With anti-spray mud flaps only on the last axle Tarpaulin rod with bracket Tow hook at rear (not included on Revolution model) Axles & Suspension SAF disc brake axles with 430 mm disc diameter "Laser-measured axles/chassis" reduces tire wear and fuel consumption Axles in off-road version Air suspension 1st axle is an automatic lift axle, including forced lowering and traction aid, operated by "brake 3x" function (traction aid works up to axle overload of 30% and a maximum speed of 25 km/h) "Hot-dip galvanized lift axle mechanism" Brake system 2-line compressed air braking system Color-coded piping for easier maintenance Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting hose 24-volt EBS, electronic braking system with EBS socket at the front, without connecting cable Note: This trailer may only be towed by towing vehicles equipped to ensure proper ABS function! With raise/lower valve Vehicle stability system Automatic tipping lowering with shut-off valve "TPMS" tire pressure monitoring system – display via towing vehicle, through EBS, not installed in truck (prerequisite: required installation in truck; only monitors base tyres) Wheels & Tires 385/65 R22.5" Steel rims Electrics 24 Volts, multi-chamber LED lights, side yellow LED lighting, license plate lighting in LED (Note: for certain towing vehicles, error messages may occur despite fully functioning system) Side yellow LED lighting linked to turn signal ("blinking side marker lights") 2 white front position lights in LED 2 white/red lane marker lights at the rear in LED 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connecting cable Integrated additional LED work light at the rear, switched with reverse light Dsdpfoy Rrplox Akljkn Hydraulics Low-pressure cylinder, max. 170 bar Operation hydraulically via vehicle PTO Body Aluminium box body made of high-grade, abrasion-resistant material. Inclined front wall, 5 mm thick, with external cylinder mounting. Side walls constructed from 30 mm hollow section profiles, neatly welded, with spill-repellent top rail profile. Interior with access steps at front wall (not with Cramaro system). External shovel and broom holders at front wall Greenline – conical, aerodynamic body form "Membrane" tailgate Tailgate as pendulum flap with double-joint hinges, externally mounted, dual hook locking Tailgate with rubber seal Continuous 6 mm thick floor Standing platform with access steps, connector plate for air/electricity/brake with large working space for optimal operability Roll tarpaulin can be stowed on right side, with central locking on the left Operating notes For transport involving salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to protect against material corrosion and rusting.

Stanje: rabljeno, številka stroja/vozila: WFDFLT33902030059, lastna masa: 7.452 kg, največja dovoljena obremenitev: 27.548 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2023, dolžina tovornega prostora: 13.460 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.655 mm, prostornina tovornega prostora: 92 m³, skupna dolžina: 13.800 mm, skupna širina: 2.550 mm, skupna višina: 4.005 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R22,5", barva: črn, The images are archive photos; the vehicle may still be in use! Weights and dimensions: Permissible / technical gross weight: 35,000 / 39,000 kg Permissible / technical payload approx.: 27,548 / 31,548 kg Permissible / technical aggregate load: 24,000 / 27,000 kg Specified fifth wheel load permissible / technical: 11,000 / 12,000 kg Unladen weight (standard version) approx.: 7,452 kg +/- build tolerance Overall length approx.: 13,800 mm Overall width max.: 2,550 mm Overall height approx.: 4,005 mm Internal length approx.: 13,460 mm Internal width approx.: 2,470 mm Internal height front approx.: 2,655 mm Internal height rear approx.: 2,853 mm Volume approx.: 92 cbm Coupling height approx.: 1,130 mm Kingpin installation dimension approx.: 1,640 mm Front corner dimension approx.: 2,040 mm Chassis: Semi-trailer for freight forwarding High-tensile steel welded lightweight construction up to the support legs, fifth wheel plate with replaceable 2" kingpin Lashing ring preparation laterally in the floor (max. 13 pairs) Dksdpfx Akswk Dc Rjlen 24 t 2-speed landing gear, one-sided operation, with straight lower section, no load equalizer Pull-out ladder at the rear Door retainers on the sides Wheel chocks with holders Side underrun protection made of aluminum Steel underrun protection with wide Fliegl mud flaps Foldable fender for light unit Quarter shell mudguards Rear impact guard Axles & Suspension BPW disc brake axles Air suspension 1st axle is an automatic lifting axle with forced lowering and start-up aid, activated via triple brake application Brake system 2-line compressed air braking system Colored line routing for easier maintenance Spring-type parking brake 2 non-interchangeable coupling heads at the front, without connection line EBS (Electronic Braking System) with socket at the front, without connection cable Wheels 385/55 R22.5" Electrics 24 volts, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin non-interchangeable sockets at the front, without connection cable SB Hydraulics Hydraulic cylinder with sliding mechanism integrated into the floor. Dual-circuit hydraulics. Note: A dual-circuit hydraulic system is required! Recommended pump capacity: Flow rate: 110 l/min Pressure: 250 bar Oil reservoir minimum: 100 l SB Body Box-shaped aluminum body made from high-grade, wear-resistant material. Front and side walls made from aluminum hollow profiles, welded all-around with a large special reinforcement profile at the top, with a special subframe welded in at the bottom. Moving wall for improved unloading of the load, with reinforced tarpaulin flaps at the bottom. Rear wall made from aluminum hollow profiles, as two-leaf doors, split 1/2 to 1/2, all-around with special U-profile with stop and rubber gasket, fitted with 2 external rotary bolt locks, locked top and bottom. Rear wall with mechanical safety lock, operation at the rear on the left in driving direction. With pivoting transverse brace at the top. Standing platform with ladders on both sides (left/right in direction of travel) and railing for opening and closing the sliding roof tarp. Removable, swiveling cross bars for tarp support + tarp support at front bulkhead and rear wall. Sliding tarp can be rolled to one side with 2 longitudinal tensioning straps, 3 side ratchet straps. At the front bulkhead and above the rear doors, the tarp is secured with hooks and rubber

Stanje: novo, konfiguracija osi: 3 osi, barva: sivo-črna, vrsta prenosa: mehanski, Colour: Natural, lift axle, electronic braking system (EBS), 1x 15-pin connection plug. Equipment: Slightly beveled new-design outer frame with “Load-Lock Profile” for lashing straps, 13 additional pairs of lashing rings in the outer frame, each rated 5 t for a total of 24 t. Two-speed landing gear, single-sided operation, with semi-circular lower section and straight forklift underrun protection made of steel on the outer frame (sides and rear). One spare wheel carrier for one single wheel, with wheel fastening kit. 1 plastic toolbox (650 mm x 520 mm x 670 mm). 7 pairs of drop-in stake pockets (83 x 83 mm) integrated into the outer frame. SAF disc brake axles with 430 mm air suspension. First axle is an automatic lift axle, including forced lowering and starting aid, activated with third brake circuit. Wheels and tires: 6 x 385/65 R22.5, brand manufacturer; 6 steel rims, factory silver. Flooring: approx. 30 mm phenolic plywood, cross joints with Omega insert for high point loading, forklift axle load up to max. 7,100 kg. Front wall / corner posts: 25 mm aluminium hollow profile, 1,950 mm high; steel corner posts in high-volume version plus 2 center supports as “Crash Blocker” (mounted inside lower area at approx. 140 mm). Sideboards: 25 mm aluminium hollow profile, 700 mm high. Paintwork: chassis hot-dip galvanized including passivation ("15-year anti-corrosion warranty"). Aluminium sideboards anodized. Subject to errors and changes. Dodpjtcwmiofx Aklskn

Stanje: rabljeno, lastna masa: 5.905 kg, največja dovoljena obremenitev: 33.095 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2024, naslednji pregled (TÜV): 04/2026, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.800 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5, Leto izdelave: 2024, Oprema: ABS, Nemško vozilo Kot novo, prevoženih le cca 30.000 km Prva registracija: 6.5.2024 Fliegel SDS 390 Roadrunner Skupna masa: 39.000 kg Lastna masa: 5.905 kg Nosilnost: 33.095 kg BPW osi I-Lock Blitz ponjava Velikost pnevmatik: 385/65 R 22,5 Ponjava z napisi, fotografije so retuširane Možne dodatne storitve! Djdpoynkiksfx Akljkn Izvozne registrske tablice (rdeče / 30 dni) Nemčija Kratkotrajne tablice (rumene / 5 dni) Nemčija Prevozna dovoljenja Avstrije je možno posredovati Dostava vozil (za doplačilo) Podatki na spletu so nezavezujoči opisi in ne predstavljajo jamčenih lastnosti. Prodajalec ne odgovarja za napake, vnosne ali prenosne napake podatkov. Prodaja vmes mogoča. Prodaja samo poslovnim uporabnikom. Veljajo izključno naši splošni pogoji.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902027997, lastna masa: 6.832 kg, največja dovoljena obremenitev: 28.168 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2021, dolžina tovornega prostora: 13.460 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.740 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5", barva: črn, These images are archive photos; the vehicle may still be in use! Equipment details available on request. Dodjwk Dg Nspfx Aklskn

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902024321, lastna masa: 5.765 kg, največja dovoljena obremenitev: 29.235 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2018, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.470 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5", barva: črn, The images are for reference only; the vehicle may still be in use. Equipment details available upon request! Djdpfowk Dk Isx Akljkn

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 06/2024, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.680 mm, Day registration in 06/2024 due to the new TPMS regulation. Chassis: Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin Outer frame slightly angled with 'Load-Lock profile' for lashing strap attachment 24 t, 2-speed landing gear, single-sided operation Side underrun protection, aluminum Rear underrun protection, galvanized steel Quarter-shell mudguards in front of and behind axle assembly With anti-spray mud flaps compliant with EU regulations Rear impact protection Spare wheel holder for 1 spare wheel, with wheel fixing kit Axles & Suspension: SAF disc brake axles with 430 mm disc diameter 'Axles/chassis laser alignment' reduces tire wear and fuel consumption 1st axle automatic lift axle, additionally electrically operable from the truck Includes forced lowering and start-up aid, no installation required on truck Brake System: 2-line compressed air braking system Spring-loaded parking brake EBS by Wabco, electronic braking system with EBS socket at the front, without connection cable With raise & lower valve + auto-reset function Vehicle stability control system Axle load detection via EBS CAN bus signal, display via monitor Wheels and Tires: 385/65 R22.5" / 6 steel rims, factory silver Electrics: 24 volt, multi-chamber lights, side LED marker lights (amber) Dsdpfx Aori Hihjkljkn 2 white LED position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin and 1 x 15-pin foolproof sockets at the front, without connection cable 2 additional LED work lights at the rear, controlled via reverse light Floor: Approximately 30 mm thick phenolic plywood, mounted on continuous longitudinal beams for high point load capacity, suitable for forklift axle loads up to max. 7100 kg at the bulkhead Drop-in Slats: 5 rows of aluminum V-insert slats 2 pairs of Vario steel slats, in conjunction with Vario beams for fore and aft load securing (then no insert slats required in the area of the steel slats) Rear Portal Doors: Double-winged, each with 2 internal lock rods. Tarp with welded horizontal and vertical belts Unladen weight: 5,960 kg Offer and pictures non-binding

Stanje: novo, največja dovoljena obremenitev: 31.920 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.410 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, New vehicle: Fliegl 4-axle low-loader trailer with ramps, model VTS 400 Gross weight: 24,000 kg / 40,000 kg Unladen weight: 8,080 kg Payload: 15,920 kg / 31,920 kg Overall length: 11,940 mm Loading length: total approx. 10,410 mm; neck approx. 2,490 mm; loading bed incl. rear taper approx. 7,920 mm Width: 2,550 mm Loading height: 900 mm Further information: Plus pre-freight / preparation ex stock 26639 Wiesmoor: €1,280.00 / net Chassis: Low-bed trailer Steel welded construction Turntable with heavy-duty ball race ring Foldable rear support 2 wheel chocks with holders Side underrun protection, aluminium Full-width rear mud flap Half-shell mudguards, 1st and 2nd axles with anti-spray flaps behind each axle, Anti-spray flaps in front of and behind 3rd and 4th axles Excavator stick trough over rear axles to the rear, approx. 1,800 mm long, 650 mm wide, 150 mm deep 2 pairs of lashing holes, each 5 t, in the excavator stick trough on the longitudinal frame, approx. 300 mm from the front and 200 mm in front of the rear slope 1 plastic toolbox, w=600 mm / h=425 mm / d=460 mm, lockable Storage box recessed in the neck floor with lid, w=720 mm / l=520 mm / d=170 mm Extendable outriggers to 3,000 mm (not for rear slope) (Track width of construction machinery/vehicles to be transported must not exceed external frame width of 2,550 mm) Storage compartment for wooden planks under the low-bed deck Wooden planks, 70 mm, for extension to 3,000 mm Lashing points, low-loader: 1 pair of lashing cutouts in the front longitudinal beams, embedded in the neck, each 10 t 4 pairs of lashing holes in the outer frame, each 5 t (for attaching ratchet straps) 9 pairs of lashing mushrooms, embedded in and above the outer frame, each 10 t: - 2 × on the neck - 7 × in the low-bed section First lashing point 250 mm from the front, last max. 250 mm from the rear; lashing point spacing max. 1,100 mm Additionally, 3 pairs of folding lashing eyes, each 10 t: - 1 × on the neck (protruding) - 1 × at the start of the low-bed inside the longitudinal beams - 1 × in the floor behind the last axle Drawgear, turntable trailer: Dsdoxrx Nlopfx Aklokn Drawbar with certified 50 mm eye Drawbar height adjustment via spring Axles & Suspension: Drum brake axles, per manufacturer’s choice "Axles/chassis laser-aligned" to reduce tire wear and fuel consumption Air suspension with lift & lower valve + auto-reset function Wheels and Tyres: 235 / 75 R 17.5", per manufacturer’s choice Steel twin wheels, factory silver Braking system: 2-line air-operated brake system Spring-loaded parking brake Axle load detection via EBS CAN bus signal for display in truck cab (truck must be equipped accordingly; not a calibrated scale) Vehicle stability system: 2 non-interchangeable coupling heads at the front, connection lines to the tractor 12-24V EBS, electronic braking system with EBS socket at the front, including connecting cable (Knorr brand) Attention: The trailer may only be towed by vehicles that guarantee ABS functionality! Electrics: 12-24V, multi-chamber LED lights, side LED marker lights (yellow), LED license plate lighting (Note: Some towing vehicles may display incorrect errors despite proper function) 2 white front position lights, LED 2 white/red rear lane marker lights, LED 2 × 7-pin non-interchangeable sockets at the front, with connection cable 1 LED rotating beacon with bracket, switchable via sidelights (removable beacon) 2 pairs...

Stanje: novo, največja dovoljena obremenitev: 31.920 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.410 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, New Fliegl 4-Axle Low Loader Trailer with Ramps, Model VTS 400 Gross weight: 24,000kg / 40,000kg Unladen weight: 8,080kg Payload: 15,920kg / 31,920kg Total length: 11,940mm Djdpsvv D Ixefx Aklekn Total loading length: approx. 10,410mm; Gooseneck: approx. 2,490mm; Loading platform incl. rear bevel: approx. 7,920mm Width: 2,550mm Loading height: 900mm Additional information plus delivery/preparation from stock location 26639 Wiesmoor: €1,280.00 net Leasing offer: term 48 months, down payment only VAT, residual value 40% Monthly instalment EUR 759.00 Chassis Low Loader Trailer Steel welded construction Turntable with heavy-duty ball-bearing slewing ring Foldable rear support 2 wheel chocks with holders Aluminium side underrun protection Full-width rear spray flap Half-shell mudguards on axle 1 + 2 with anti-spray flaps behind each axle Anti-spray flaps before and behind axles 3 and 4 Excavator arm recess over rear axles, stretching to the rear, approx. 1,800mm long, 650mm wide, 150mm deep 2 pairs of lashing holes (5t each) in the excavator arm recess, side-mounted on the longitudinal frame, approx. 300mm from the front and approx. 200mm before the rear bevel 1 plastic toolbox, w=600mm / h=425mm / d=460mm, lockable Storage box recessed into the gooseneck floor with lid, w=720mm / l=520mm / d=170mm Extendable widenings to 3,000mm (not at rear bevel) (Note: the track width of machines or vehicles being transported must not exceed the outer frame width of 2,550mm) Wooden plank compartment under the low-bed platform 70mm wooden planks for extension to 3,000mm Low loader lashing points 1 pair of lashing cutouts sunk in the longitudinal beam at the front of the gooseneck, 10t each 4 pairs of lashing holes in external frame (5t each, suitable for tension belt attachment) 9 pairs of lashing mushrooms set into the external frame above and on the sides, each 10t 2x front on gooseneck 7x low-bed area 1st lashing point 250mm from front, last max. 250mm from rear, max distance between lashing points 1,100mm 3 additional pairs of folding lashing eyes, 10t each: - 1x on gooseneck (protruding) - 1x inside start of low-bed area in longitudinal beams - 1x recessed in floor behind last axle Towing arrangement, turntable trailer Drawbar with certified 50mm draw eye Drawbar height adjustment via spring Axles & Suspension Drum brake axles, manufacturer’s choice Chassis/axle laser alignment (reduces tyre wear and fuel consumption) Air suspension with raise & lower valve + auto reset function Wheels and tyres 235/75 R 17.5”, manufacturer’s choice Steel twin wheels, factory silver Braking system 2-line pneumatic brake system Spring-loaded parking brake Axle load detection via EBS CAN-Bus signal (for in-cab display, truck must be pre-equipped, not a calibrated scale) Vehicle stability system 2 foolproof coupling heads at the front, with connecting lines to tractor unit 12-24V EBS (Electronic Braking System) with EBS plug at the front and connecting cable (Knorr brand) Note: Trailer must only be towed by towing vehicles capable of ensuring full ABS functionality! Electrics 12-24V, multi-chamber LED lamps, amber LED side markers, LED license plate lighting (Note: On certain tractor units, malfunction messages may appear even if operational) 2 white position lights at the front (LED) 2 white/red contour marker lights at the rear (LED) 2x 7-pin foolproof connectors at the front

Stanje: novo, največja dovoljena obremenitev: 31.100 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.410 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.520 mm, Gross weight: 24,000kg / 40,000kg Curb weight: 8,900kg Payload: 15,100kg / 31,100kg Total length: 11,940mm Loading length: 10,410mm total, 2,490mm gooseneck, 7,920mm loading deck including rear bevel Width: 2,520mm Loading height: 900mm Further information: plus pre-carriage / provision ex stock location 26639 Wiesmoor: €1,280.00 net Steel welded construction Turntable with heavy-duty ball-bearing slewing ring Foldable rear support Wheel chocks with holder Aluminium side underrun protection Rear mudflaps across the full width (not in combination with forklift holder) Half-shell fenders on 1st and 2nd axles with anti-spray mudflaps behind each axle Anti-spray mudflaps in front of and behind 3rd and 4th axles Excavator arm recess over rear axles to the rear, approx. 1,800 mm long, approx. 650 mm wide, approx. 150 mm deep 2 pairs of lashing holes (5 t each) in the excavator recess at the side of the longitudinal frame, approx. 300 mm from the front and approx. 200 mm before the rear bevel 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable 1 storage box embedded in gooseneck floor with lid, W=720 mm / L=520 mm / D=170 mm Dkjdpfx Aerducpekljn Extendable width to 3,000 mm (not in rear bevel) (Track width of machines/vehicles to be transported must not exceed outer frame width of 2,550 mm) Storage compartment for timber planks under low-bed platform 70 mm timber for widening to 3,000 mm Low loader lashing eyes 1 pair of lashing cut-outs at the front longitudinal member in gooseneck, each rated 10 t 4 pairs of lashing holes in the outer frame, each 5 t (lashing strap attachment) 9 pairs of recessed lashing mushrooms in the outer frame, top and side, each 10 t 2 x front on gooseneck 7 x in lowered bed First lashing eye 250 mm from the front, last max. 250 mm from the rear, spacing not greater than 1,100 mm 3 pairs of additional folding lashing eyes, each 10 t: 1 x on gooseneck (protrudes) 1 x at beginning of low bed, recessed in longitudinal rails 1 x behind the last axle, recessed in the floor Trailer tow device Drawbar with certified 50 mm towing eye Drawbar height adjustable by spring Axles & suspension Drum brake axles, manufacturer's choice Axles/chassis laser aligned—reduces tire and fuel wear Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation front and rear (equalisation rocking beams) Wheels and tires 235/75 R 17.5" manufacturer's choice Steel rims in twin configuration, factory silver Braking system 2-line compressed air brake system Spring-loaded parking brake 2 foolproof coupling heads at the front with connection leads to tractor unit 24 Volt ABS and ALB, with ABS connector at front, with connecting cable Note: The trailer may only be towed by tractors supporting ABS function! Electrics 12–24 volt, multi-chamber LED lamps, side yellow LED marker lights, LED license plate lights (note: some tractors may show false diagnostics despite correct function) 2 white position lights at the front, LED 2 white/red lane marker lights at the rear, LED 2 x 7-pin foolproof connectors at the front, with connecting cable 1 LED beacon with holder, switched via position light (removable beacon) 2 pairs of warning plates, double LED illuminated and extendable to 3,000mm Floor Gooseneck front with steel/checker plate covering then approx. 70 mm softwood floor, in the wheel arch area steel/checker plate covering Rear bevel with 70 mm softwood floor A

Stanje: novo, največja dovoljena obremenitev: 29.500 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 1.450 mm, prostornina tovornega prostora: 25 m³, skupna širina: 2.550 mm, Vehicle is from current production - available in approx. 2 weeks Vehicle / Body: Tipping Trough Gross Weight: 35,000kg / 39,000kg Unladen Weight: 5,500kg !!! Payload: 29,500kg / 33,500kg Total Length: 8,600mm Volume: 25 cbm Further Information: - Overall height approx. 3,160mm - Internal width approx. 2,350mm - Coupling height approx. 1,200mm Chassis – Semi-Trailer Tipper: - Fine-grained steel welded construction, basic lightweight design - 1x centre support leg - Folding underrun protection - Underrun protection with "spring assistance" for easier operation - Half-shell mudguards - Integrated “mudguard holder” with a stone-repellent surface - With antispray mud flaps only on the rear axle - 2 towing hooks at the rear Axles & Suspension: - SAF disc brake axles with 430 mm disc diameter - “Axle/chassis laser measured" for reduced tyre wear and fuel consumption - Axles in off-road specification - Air suspension - Air bag pressure gauge, mounted front on curved chassis - 1st axle is an automatic lift axle, also electrically operable from the truck, including forced lowering and start-off assist, without truck installation (start-off assist is functional up to 30% axle overload and up to a max. speed of 25 km/h) Braking System: - 2-line compressed air brake system Coloured line routing for easy servicing. - Spring-actuated parking brake - 2 front foolproof coupling heads, without connecting line - 24 volt EBS, Electronic Braking System with EBS socket at the front, without connection cable - With raise & lower valve - Vehicle stability control system - Automatic tip lowering with shut-off valve Wheels and Tyres: - 6 x 385/65 R22.5" European brand, manufacturer’s choice Electrics: - 24 volt, multi-chamber LED lights, side yellow LED marker lights, number plate illumination in LED (Note: with some tractors, diagnostic errors may occur even though functions are correct) Side yellow LED lighting linked with indicator - "flashing side marker lights" - Premium LED side marker lamps, each with 20 LEDs per unit - 2 white front position LED lights included - 2 white/red lane control rear LED lights included - 2 x 7-pin and 1 x 15-pin foolproof sockets at the front, no connection cables - LED working lights mounted on both sides (activated via reverse light) Dkodpfx Akovhyf Rolon - 2 additional LED work lights recessed at rear Hydraulics: - High-pressure cylinder max. 250 bar, smallest stage hard chromed, with HDK screw coupling, fixed part, NW 48 mm - Hyva make - Operated hydraulically via truck PTO - Hydraulic connection with hose and vehicle plug NW = 54 mm with large wing nut Tipping Body: HARDOX steel round trough in “Stone Master Design” of highly wear-resistant HB 400/450 steel. Inclined front wall with external hydraulic cylinder mount. Interior with ladder at front wall - Greenline – conical, aerodynamic body design - Shovel and broom holder on exterior front wall - "Membrane" tailgate - Tailgate as pendulum flap with "double-joint hinge", externally mounted with dual hook lock. 2 clamping bolts with toggle locks at the bottom on each side - Tailgate with rubber seal Note: Heat-resistant up to max. 170°C! - Continuous sidewalls 4 mm thick, floor 4/5 mm thick, wear- and weight-optimised structure - Fliegl S.T.E.P. – swivelling platform at front with folding ladder for side access LH side,