Fliegl Dtl 300 3-Achs Tieflader Agrar Greenl. Hydraulik nakup rabljenega (41.692)

Stanje: rabljeno, največja dovoljena obremenitev: 17.200 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/1999, dolžina tovornega prostora: 8.650 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, Skupna dolžina: 10.910 mm Nakladalna dolžina: 8.650 mm Širina: 2.550 mm / uporabna širina ca. 2.500 mm Višina nakladanja: 900 mm Dodatne informacije: - Dvojna montirana kolesa 235/75R17,5 Godpfxeynrc Es Ab Iebn - BPW osi - Zadnje oporne noge zložljive - 4 vtikači za strani - Nakladalne rampe iz aluminija 2.400 mm - Sidrne zanke v zunanjem okviru

Stanje: rabljeno, največja dovoljena obremenitev: 23.700 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2023, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, Total weight: 24,000kg / 30,000kg Unladen weight: 6,300kg Payload: 17,700kg / 23,700kg Overall length: 10,900mm Loading length: total 8,600mm; 6,500mm including rear bevel; 2,100mm gooseneck Width: 2,550mm Gbedpjwrv Saofx Ab Ijn Loading height: 900mm Further information: - Heavy-duty welded construction made from high-strength fine grain steel - Hot-dip galvanized - Rear support - Twin wheels 235/75R17.5 - Warning panels - LED reversing lights - Lashing points on outer frame - Lashing rings: 4x gooseneck, 6x low bed (10,000 daN) - Single-piece hot-dip galvanized loading ramps (3,100mm x 750mm), 50mm softwood decking, laterally adjustable - Storage box in gooseneck - Plastic toolbox - Bumper - Floor with 50mm softwood decking - Climbing strips on rear loading gradient

Stanje: rabljeno, največja dovoljena obremenitev: 34.440 kg, skupna masa: 46.500 kg, konfiguracija osi: 3 osi, prva registracija: 06/1999, dolžina tovornega prostora: 13.550 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 950 mm, skupna širina: 2.550 mm, Skupna masa: 46.500 kg Lastna masa: 12.060 kg Nosilnost: 34.440 kg Skupna dolžina: 13.550 mm - 26.550 mm Širina: 2.550 mm Dodatne informacije Gbsdpfx Asycpbnjb Ien - 3 osi hidravlično prisilno vodene - Klin za preusmeritev nad sedlom - Vpenjalna letev za rampe - Vstavni koli na nakladalni površini - Dvojno teleskopsko raztegljiv do 26.550 mm - Orodni kovček na labodjem vratu - E-kolo - priprava za eln - hidravlična funkcija sledenja z električnim daljinskim upravljanjem - velik paket za pritrditev - lastna hidravlična črpalna enota Na voljo tudi novi in rabljeni polpriklopniki nizkopodnežnega tipa. Več informacij na

Stanje: rabljeno, največja dovoljena obremenitev: 29.400 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2007, naslednji pregled (TÜV): 04/2026, Oprema: ABS, * 1091 - ID vozila za telefonske upite * Proizvođač: M&V, Tip: NPSL32 Godpsyt Alzofx Ab Iebn * Poluniska niskopodni prikolica sa labud vratom * ABS, EBS, BPW-Eco osovine, doboš kočnice, vazdušno ogibljenje, 1. osovina podizna osovina, 2. + 3. osovina sa hidrauličkim prinudnim upravljanjem, TRIDEC šasija, osovina sa daljinskim ručnim upravljanjem, centralno podmazivanje, šina za priključivanje ulaznih rampi * Zadnji deo pneumatski izvlačiv za 1,50 m * Vrlo dobro stanje, (prema prethodnom vlasniku pre oko 3 godine urađena nova podnica i generalni remont!) * tehnički dozvoljena ukupna masa: 41.000 kg * Pneumatici: 235/75R17,5 (9 mm) ----naša e-mail adresa:     naša usluga za Vas:       - Nabavka kratkoročnih ili carinskih tablica       - Prevoz / dostava širom EU       - Carinjenje vozila za treće zemlje Ako imate pitanja na ruskom jeziku, možete pozvati sledeći broj * WhatsApp samo za govornike ruskog jezika: * WhatsApp za engleski, nemački i druge jezike:

Stanje: novo, največja dovoljena obremenitev: 23.940 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2025, * T3 Profi 30.0 ----Braking System: Gjdpel Th I Asfx Ab Isbn * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Parabolic springs with mechanical rear axle equalization ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment via draw spring and turnbuckle ----Lighting / Electrics: * RDÜ tire pressure monitoring * Multi-voltage system * LED tail lights 12 / 24 V * Rear removable rotating beacon * 15-pin power connector ----General Attachments: * Lateral underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front: closed plastic mudguards; Rear: straight galvanized steel skirts, each with splash guards * Tool box made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanized) for tool box in the bogie platform * Four stake pockets per side (stakes not included), also suitable for lashing ----Load Securing (La-Si package consists of): * 2 lashing eyes (6.4 t) front left & right on main frame of the bogie platform * 6 pairs of UVV-certified lashing rings, foldable and lowerable, loadable in all directions, recessed into the outer frame * Corner load capacity 13.4 t, otherwise 10 t ----Widening: * 6 pairs of mechanical fold-out outriggers for max. overall width of 3 meters (except at the sloped rear) * Widening planks stored in the center of the loading area ----Ramps: * Hot-dip galvanized one-piece hydraulic drive-on ramps (approx. 3,000 x 720 mm), mechanically laterally adjustable * 4-way valve block for retrofit hydraulic lateral ramp shift ----Loading Area: * Over turntable: approx. 1,960 x 2,520 mm & unladen height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unladen height approx. 910 mm (including 860 mm drive-on slope) ----Tyres: * 235/75 R 17.5 twin tyres ----Unladen weight: * Approx. 5,980 kg unladen weight ----Paintwork: * Chassis, bogie, drawbar and drive-on ramps hot-dip galvanized * Axles, springs, air tanks etc. painted black ----Info: * Permissible gross weight technically up to 30,000 kg * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: Immediately available from Egestorf

Stanje: novo, največja dovoljena obremenitev: 23.940 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profi 30.0 ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Parabolic springs with mechanical rear axle compensation Godpol Th Nnofx Ab Isbn ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment via drawbar spring & turnbuckle ----Lighting / Electrics: * TPMS Tire Pressure Monitoring System * Multi-voltage system * LED tail lights 12 / 24 V * Rear removable warning beacon * 15-pin power connector ----General Equipment: * Side underrun protection * Rear swing-down support legs on chassis frame * Mechanically adjustable warning panel kits front and rear * VA closed plastic mudguards in front and straight galvanized steel skirts at the rear, each with spray protection * Tool box made of galvanized steel sheet - black powder-coated - approx. 650 x 300 x 600 mm * Folding lid (hot-dip galvanized) for the toolbox in the turntable platform * Four stake pockets per side (stakes not included), also with lashing function ----Load Securing (La-Si package consisting of): * 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform * 6 pairs of UVV folding and retractable lashing rings, loadable in all directions and countersunk into the outer frame * 13.4 t at corners, 10 t otherwise ----Widening: * 6 pairs of manual folding outrigger arms for 3 m overall width (not on the sloped rear section) * Widening boards stowed in the center of the loading area ----Ramps: * Hot-dip galvanized one-piece hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-way hydraulic control unit pre-installed for optional hydraulic side shift of ramps ----Loading Area: * Over turntable: approx. 1,960 x 2,520 mm & unladen height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unladen height approx. 910 mm (incl. 860 mm entry incline) ----Tyres: * 235/75 R 17.5 twin tyres ----Unladen weight: * Approx. 5,980 kg unladen weight ----Finish: * Chassis, turntable, drawbar and loading ramps hot-dip galvanized * Axles, springs, air tanks etc. painted black ----Information: * Permissible total weight of 30,000 kg technically possible * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Immediately available ex stock Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 34.000 kg, skupna masa: 48.500 kg, konfiguracija osi: 3 osi, prva registracija: 10/2009, naslednji pregled (TÜV): 06/2026, dolžina tovornega prostora: 12.000 mm, širina tovornega prostora: 3.000 mm, višina nakladalnega prostora: 3.750 mm, skupna širina: 2.500 mm, skupna višina: 3.750 mm, Leto izdelave: 2009, Oprema: ABS, Zelo dober 3-osni nizkopodna prikolica Langendorf SATH 30/34 z ugrezi za kolesa, dvojno zložljive nakladalne rampe, tovorna površina 7.400 mm, sprednja ploščad 3.650 mm, zadnja ploščad 4.580 mm, od škripca do konca vozila 14.890 mm, nizko ležeča nakladalna postelja pribl. 500 mm in še več. Popolna nizkopodna prikolica za prevoz bagrov, tovornjakov in seveda viličarjev. Godpowy E Ndofx Ab Iebn

Stanje: novo, lastna masa: 1.150 kg, največja dovoljena obremenitev: 2.350 kg, skupna masa: 3.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 1.950 mm, višina nakladalnega prostora: 300 mm, prostornina tovornega prostora: 2,4 m³, barva: drugo, gradbena višina: 980 mm, delovna širina: 2.060 mm, Manufacturer: Brian James Trailers Model: Rear Tipper Cargo Tipper Gross Vehicle Weight: 3,500 kg, Tri-axle Payload Capacity: 2,350 kg Unladen Weight: 1,150 kg Dimensions of Load Bed: 4,000 x 2,000 x 300 mm Tyres: 195/60 R12C Loading Height: 680 mm Tipping Angle: up to 60° - Equipped with electric pump - New load bed design - Smooth-surface loading area - Swinging rear tailgate - Reinforced loading bed - Robust, stable sidewalls - Integrated lashing points - Safety and maintenance support struts - Tool/storage box - Spare wheel included - Lateral lashing points and net hooks - Integrated coupling lock - Modern lighting system - 5-year chassis warranty Godpfx Abjw Df Rco Isbn Price includes vehicle registration certificate (Part II) and COC papers. We carry a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. Free temporary transit plates on request. We perform repairs on trailers of all makes. Additional accessories available upon request. Technical specifications, prices, and details are subject to change and errors excepted. We do not accept liability for mistakes or typographical errors. Features: - Automatic reversing mechanism - Rubber suspension axles - Tiltable load bed - Jockey wheel - Marker lights - Hot-dip galvanized - Braked - Inclusive warranty - Tipping angle up to 60° - Electric pump - New load bed design - Smooth-surface loading area - Swinging rear tailgate - Reinforced loading bed - Sturdy sidewalls - Integrated lashing points - Safety/maintenance support strut - Tool/storage box - Spare wheel - Lateral lashing points and net hooks - Integrated coupling lock - Modern lighting system - 5-year chassis warranty

Stanje: novo, lastna masa: 1.100 kg, največja dovoljena obremenitev: 2.400 kg, skupna masa: 3.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 3.600 mm, širina tovornega prostora: 1.950 mm, višina nakladalnega prostora: 300 mm, prostornina tovornega prostora: 2,2 m³, barva: drugo, gradbena višina: 980 mm, delovna širina: 2.060 mm, Manufacturer: Brian James Trailers Model: Rear Tipper Cargo Tipper Permissible Total Weight: 3,500 kg, 3-axle Gbedpow Df Eyjfx Ab Isn Payload: 2,400 kg Unladen Weight: 1,100 kg Bed Dimensions: 3,600 x 2,000 x 300 mm Tires: 195/60 R12C Loading Height: 680 mm Tipping Angle: up to 60° Features: - Equipped with electric pump - New platform design - Platform with smooth surface - Pendulum tailgate - Reinforced loading bed - Robust side panels - Integrated lashing points - Safety support / maintenance stand - Storage box - Spare wheel - Side lashing points and net hooks - Integrated coupling lock - Modern lighting system - 5-year chassis warranty Price includes vehicle registration document (Registration Certificate Part II and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. Upon request, we provide a free transfer license plate. We repair trailers from all manufacturers. Additional accessories available upon request. Technical modifications, price changes, and errors excepted. No liability is accepted for errors or printing mistakes. Features summary: automatic reversing system, rubber suspension axle, tiltable loading area, jockey wheel, marker lights, hot-dip galvanization, braked, including warranty, 60° tipping angle, electric pump, new platform design, smooth loading surface, pendulum tailgate, reinforced loading bed, robust side panels, integrated lashing points, safety support/maintenance stand, storage box, spare wheel, side lashing points and net hooks, integrated coupling lock, modern lighting system, 5-year chassis warranty.

Stanje: novo, lastna masa: 6.000 kg, največja dovoljena obremenitev: 24.000 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.540 mm, širina tovornega prostora: 2.550 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 r17,5, Leto izdelave: 2026, Oprema: ABS, osrednja vrtljiva plošča, 3-AXLE HUMBAUR LOW-LOADER TRAILER INCLUDES: 3 PAIRS OF 6-TON LASHING POINTS IN THE OUTER FRAME => HOT-DIP GALVANIZED CHASSIS FRAME => HOT-DIP GALVANIZED BOGIE FRAME => HOT-DIP GALVANIZED LOADING RAMPS => 10 x 10-TON LASHING POINTS => 10 x 3-TON LASHING POINTS, outer frame => 8 x 2-TON LASHING POINTS, above wheels => SPRING-ASSISTED LIFTING DEVICE FOR RAMPS => 40 mm DRAWBAR => APPROX. 2,700 MM LONG LOADING RAMPS => APPROX. 750 MM WIDE LOADING RAMPS => TWIN TIRES 235/75 R17.5 INCH => LOADED PLATFORM HEIGHT ONLY APPROX. 860 MM => COUPLING LENGTH / B-LENGTH APPROX. 10,720 MM Godpfjd U A Tgjx Ab Iebn => FRONT CORNERS BEVELLED => TWO FOLDING SUPPORT LEGS AT REAR => AND MUCH MORE => Delivery freight: 2.90 Euros plus VAT per km => Prices ex works D-86368 Gersthofen Your direct contact: Mr. Hirn Tel. DOLL FAHRZEUGBAU *Subject to prior sale and changes!* *Price valid ex works D-86368 Gersthofen* *Sale to commercial customers only!* *Pictures may differ and serve only as an approximate reference => may show/include options subject to surcharge*

Stanje: novo, lastna masa: 6.650 kg, največja dovoljena obremenitev: 23.350 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.540 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r17,5 zoll, Leto izdelave: 2026, Oprema: ABS, osrednja vrtljiva plošča, 3-AXLE LOWBED TRAILER => FULL AIR SUSPENSION (front and rear) => HOT-DIP GALVANIZED Permissible total weight: 30,000 kg Payload: approx. 23,350 kg Chassis frame hot-dip galvanized via immersion bath Air suspension SAF axle with drum brake EBS electronic braking system Tyres: 235/75R17.5 – 12 units Lowbed length: approx. 6,500 mm 3 pairs of 10 t lashing rings recessed in the lowbed 2 pairs of 10 t lashing rings recessed in the highbed 4 pairs of 3 t lashing points on the outer frame 3 pairs of 6 t lashing eyes on the outer frame 6 pairs of stake pockets 90 x 50 mm in the outer frame Toolbox at the front, top of the platform with hinged lid 3-metre widening package without incline, with fold-out supports Spring ramp lifter 4 x warning panels Rotating beacon Storage compartment under the loading floor 1-piece ramp approx. 3,150 x 750 mm Softwood flooring for loading area and ramps Optional extras if required: Hydraulic ramp lifter €2,690.00 + VAT Godpfx Aehmm N Ujb Iebn => Delivery freight cost: €2.90 plus VAT per km => Prices are ex works D-86368 Gersthofen Your direct contact: Mr. Hirn, Tel. DOLL VEHICLE MANUFACTURING *Subject to prior sale and changes!* *Price valid ex D-86368 Gersthofen* *Sale to business customers only!* *Images may vary and are for general guidance only => may show/accessories subject to surcharge*

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 6.950 kg, največja dovoljena obremenitev: 23.050 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.500 mm, širina tovornega prostora: 2.520 mm, skupna dolžina: 9.350 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, Rešitev za prevoz po meri Konfigurirajte svoje Fliegl vozilo glede na vaše zahteve. Prikazano vozilo je primer. Proizvodnja in oprema se izvajata individualno glede na želje stranke. Šasija prikolice s centralno osjo, gradbena izvedba Varjena konstrukcija iz drobnozrnatega jekla Prednji oporni nogi na menjalniku Hidravlična zadnja podpora Zagozde za kolesa z nosilcem Stranska zaščita iz aluminija brez zaščite proti podvozu Zadnji blatniki čez celotno širino Blatniki pred vsako osjo in antispray-blatniki za vsako osjo Plastična orodjarna, z vmesno polico, š=620/v=360/g=440 mm, zaklepna z obešanko Razširitve izvlečne do 3.000 mm Sredinsko skladišče za lesene deske + lesene deske 70 mm za razširitev na 3.000 mm Privezne točke za nizkonosečo prikolico Vgrajeni obročasti d-vlečni nosilci v zunanjem okviru, vsak 5 t (možnost predelave v cevi za količke) Privezne gobice zgoraj in ob strani v zunanjem okviru, vsak 10 t Vleka centralnoose prikolice Vlečna roka s preizkušeno 50 mm vlečno zanko Osovine in vzmetenje Bobnaste zavore "Lasersko merjene osi/podvozje" - za zmanjšano obrabo pnevmatik in nižjo porabo goriva Zadnja os krmiljena, z avtomatsko blokado pri vzvratni vožnji prek vzvratnega svetila, dodatna blokada na vozilu prek ročnega gumba Zračno vzmetenje 1. os samodejno dvižna os, dodatno ročno spustljiva, upravljanje prek gumba na vozilu Dvig osi pod priporočeno vozno višino, zato ni jamstva za poškodbe pnevmatik Zavorni sistem Dvocevni zračni zavorni sistem, barvno označene cevi za lažje servisiranje Parkirno zavora z vzmetjo 2 nezamenljivi priključni glavi spredaj z povezovalnimi cevmi do vlečnega vozila EBS, Elektronski zavorni sistem z EBS priključkom spredaj, vključno s povezovalnim kablom Opozorilo: Priklopno vozilo sme vleči samo vlečno vozilo, ki zagotavlja delovanje ABS! Gjdpezcv D Njfx Ab Isbn Z dvigalno/spustnim ventilom Višina vozila v kombinaciji z dvižno osjo: ko je os dvignjena, se višina nakladalne oziroma skupne višine poveča za 50 mm Sistem za stabilnost vozila Trailer Infocenter za prikaz podatkov o vozilu, kot so obremenitev osi, prevožena kilometrina in diagnostična/sporočilna sporočila sistema Prepoznavanje obremenitve osi prek EBS-Canbus signala, prikaz na zaslonu v kabini voznika Kolesa in pnevmatike 235/75 R17,5, znamka po izbiri proizvajalca Jeklena platišča, tovarniško srebrna Električni sistem 24 voltov, večkomorni LED žarometi z uporom, stranske rumene LED luči, osvetlitev registrskih tablic v LED 2 bele pozicijske LED luči spredaj 2 bela/rdeča LED luči za ohranjanje pasu zadaj 2 x 7-polni izmenljivo varni vtiči spredaj s povezovalnim kablom Dodatni LED delovni reflektorji na zadku LED rotacijska luč z nosilcem Opozorilne table osvetljene z LED, izvlečne do 3.000 mm Tla potem 70 mm pod iz mehkega lesa, na območju blatnikov jeklena/rebrasta pločevina Zadnja zaokrožitev s 70 mm mehke lesene talne obloge Nizko nakladalna površina z zadnjo zaokrožitvijo 7.500 mm Nakladalne rampe Jeklene rampe dolžine 2.800 mm, širine 750 mm, bočno premične preoblečene z lesom Hidravlično prek stranskega izhoda pogonskega vozila z dušilko, upravljanje stransko na levi spredaj Hidravlično bočno premikanje nakladalnih ramp, možnost individualnega upravljanja Hidravlična povezava s SVK vtičem NW 10/3, vključno s povezovalno cevjo Rešitev za prevoz po meri

Stanje: novo, lastna masa: 5.740 kg, največja dovoljena obremenitev: 24.260 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, barva: srebrn, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Lokacija vozila: Bovenden, rotacijska luč, 3 osi, SAF osi, vrtljiva prikolica, listno vzmetenje, ABS (protiblokirni sistem), razširljivo na 3 m, pritrdilne zanke, dvižne rampe 2-delne, mehanske rampe, izvlečna vlečna palica, stranska aluminijasta zaščita, dvojne pnevmatike, EBS Nadgradnja: tovorna dolžina cca 8,5 m, razširljivo na 3,05 m Demonstracijsko vozilo! Parabolično vzmeteno z izravnavo osi zadaj, 3x 10t SAF osi, dovoljena skupna masa možna 30t, po dolžini nastavljiva vlečna palica. Novo vozilo iz zaloge s priložnostno registracijo na proizvajalca 21.07.2020! Podatki o dodatni opremi brez jamstva, spremembe, vmesna prodaja in napake pridržane! Gsdpfxexbttqo Ab Iebn

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT10401014064, lastna masa: 1.500 kg, največja dovoljena obremenitev: 2.300 kg, skupna masa: 3.800 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 2.000 mm, višina nakladalnega prostora: 1.000 mm, skupna dolžina: 4.300 mm, skupna širina: 2.460 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, barva: zelen, multiple units available Single-axle container trailer Type EPS 38 for diesel generator set installation Single-axle trailer chassis Fine-grained steel welded construction Mounting of the generator unit by bolting Front support wheel in reinforced design, mechanically length-adjustable and foldable downwards 1 pair of two-speed support legs at the rear, with straight base, can be operated separately left and right Wheel chocks with holder Side underrun protection, aluminium, painted RAL 6031 bronze green matte Rear underrun guard, steel, painted RAL 6031 bronze green matte Mudguards in front of and behind the axle, top covered with sheet metal with anti-spray mudflaps 2 pairs of lashing cutouts, one pair at the front and one pair at the rear recessed into the crossmembers, each with 3 t capacity for loading the trailer, with labeling (sticker) 4 pairs of ferry lashing eyes, marked yellow Lashing eye stickers at each lashing point Steel perforated plate with rosette profile" on both sides next to the generator set, pull-out ladder on both sides Mounting bracket for 2 x 20l fuel canisters on the vehicle frame FR-right Central lashing eye sticker Toolbox steel, recessed at the front into the floor with drain holes and lined with perforated rubber mat, lockable lid, lock not included Drawbar arrangement for single-axle trailer Drawbar with approved 40 mm swivel towing eye / NATO towing eye Drawbar height-adjustable via spindle. The nut for the spindle fastening screw is at FR-right bottom Parking sockets for electrics/EBS and air Axle + suspension BPW axles with tapered roller bearings and S-cam brakes "Axle/chassis laser-aligned" for reduced tire wear and fuel consumption Gjdpszazrtjfx Ab Iobn Parabolic suspension with maintenance-free steel-rubber bushings Wheels and tires 235/75 R 17.5 manufacturer's choice Steel rims, factory silver Brake system 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, with connector lines to tractor unit Yellow connection FR-left, red connection FR-right ABS/EBS, electronic braking system with EBS socket at front, with connection cable EBS modulator fitted in protected position Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Vehicle – driving stability system Electrics 24 volt, multi-chamber lights, side LED lighting in yellow Electrics to ADR specification with certificate 2 white front marker lights and reflectors, 2 white/red lane marking lights at rear 1 x 15-pin socket + 1 x 15-pin coil cable at the front, detachable Approval / plates Country of registration: Germany with Dekra inspection and certificate (according to §13 EC-FGV) 24/7 service hotline prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, rear only, white Warning plate according to ECE-70 Paintwork Frame RAL 6031, bronze green matte Drawbar same color as frame Multiple units available

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33001012559, lastna masa: 6.250 kg, največja dovoljena obremenitev: 17.750 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.620 mm, širina tovornega prostora: 2.520 mm, skupna dolžina: 10.890 mm, skupna širina: 2.550 mm, skupna višina: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17,5", stanje pnevmatik: 100 odstotek, barva: črn, Chassis Low-bed Trailer: Steel welded construction, turntable with robust ball-bearing slewing ring, foldable rear support, 2 wheel chocks with holder, aluminum side underrun protection, splash guards at the rear across the full width (not compatible with forklift mounting), half-shell mudguards, 1st axle with anti-spray splash guards, anti-spray splash guards behind 2nd and 3rd axles, 1 plastic toolbox with shelving, W=620/H=360/D=440 mm, lockable with padlock, width extensions retractable to 3,000 mm, storage compartment for timber planks in the middle of the load bed, 70 mm timber planks for extension to 3,000 mm, lashing eyes for low-loader, 1 pair of lashing cutouts in the longitudinal beam at the front on the gooseneck recessed (each 10 t.), 4 pairs of lashing holes in the outer frame (each 5 t. load securing strap hooks), 7 pairs of lashing mushrooms, recessed at the top and sides of the outer frame (each 10 t.), 1x front on gooseneck, 6x in well-bed, first lashing eye 250 mm from the front and last a max. of 250 mm from the rear, spacing of the lashing eyes no greater than 1100 mm, 5 pairs of ring lashing eyes recessed in the outer frame (each 5 t., convertible to stake pockets), 2 pairs of additional folding lashing eyes (each 10 t.), 1x on gooseneck (protruding), 1x recessed in the floor behind the last axle, 1 pair of screw-in lashing eyes (each 6.7 t., JDT), with large flange plate incl. thread as counter-holder, at the front on gooseneck. Towing attachment for turntable trailer: drawbar with certified 40 mm towing eye, parking sockets for electrics/ABS and air connections on the drawbar. Axles & Suspension: SAF drum brake axles, 'axle/chassis laser alignment' for reduction of tire wear and fuel consumption, air suspension with raising & lowering valve, controllable separately for front and rear. Wheels and Tires: 235/75 R17.5" Fulda, rims: 6 x steel rims mounted inside in twin arrangement; 6 x polished aluminum rims mounted outside. Brake system: 2-line compressed air brake system, spring-loaded parking brake, trailer info center to display vehicle data such as axle load (not certified scales) and odometer, vehicle driving stability system, axle load detection via EBS CAN bus signal for display on truck cab screen (truck must be suitably pre-equipped), 2 fail-safe coupling heads at front with connecting lines to tractor unit, EBS, electronic braking system with EBS plug at front including connection cable. Gsdpfjzaznzex Ab Iobn Electrics: 24 Volt, multi-chamber LED lights, side yellow LED lighting, license plate lighting in LED, make: Aspöck EcoLED 2 with dynamic indicator premium LED side marker lights, 2 front white position lights in LED, 2 rear white/red lane control lights in LED, 2 x 7-pin fail-safe plugs at the front with connection cable, additional LED work light at rear, 1 LED rotating beacon with bracket, switched via parking light, 2 pairs of LED-illuminated warning signs, extendable to 3,000 mm. Floor: front gooseneck section with steel/chequer plate covering, tool box recessed in the ramped transition to gooseneck, then with 70 mm Siberian larch wood flooring, wheel arch area with steel/chequer plate surface, rear ramp with 70 mm larch wood flooring, low-bed area including rear ramp 6,500 mm, drive-on ramps: steel ramps 2,800 mm long, 750 mm wide, laterally adjustable, additional ramp securing bracket, foldable underneath (for lateral anti-slip - not in combination with hydraulic lateral ramp shift), with wood overlay, spring

Stanje: rabljeno, največja dovoljena obremenitev: 28.410 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2012, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 700 mm, FLIEGEL polpriklopnik s stranicami in 3 osmi Nosilnost: 28.410 kg TIP: SDS350 Zavora: disk Os: BPW + zračno vzmetenje 2x podporna točka (JOST) Dolžina: 13,60 m Širina: 2,40 m Višina: 0,70 m Gbjdowgghnopfx Ab Ijn Z veseljem vam pomagamo tudi pri financiranju/leasingu v sodelovanju z našimi partnerji. Vse navedene informacije so brez jamstva. Pridržujemo si pravico do napak in vmesne prodaje.

Stanje: novo, največja dovoljena obremenitev: 13.200 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.500 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 860 mm, skupna širina: 2.550 mm, Gross vehicle weight: 18,000kg / 21,000kg Unladen weight: 4,800kg Payload: 13,200kg / 16,200kg Godpsr Da Uvjfx Ab Iobn Overall length: 9,450mm Load length: 7,500mm incl. rear bevel Width: 2,520mm Loading height: 860mm Additional information: - Chassis painted in stock colour Nova grey - Wooden floor 70 mm - Steel ramps, 2,800mm long x 750mm wide, laterally adjustable - With spring lift assistance - Foldable rear supports - Aluminium side underrun protection - Plastic toolbox - 3m widening package - Large lashing package – 5 pairs of ring lashing eyes recessed in the outer frame (convertible to stake pockets), each rated at 5 tonnes; 7 pairs of lashing mushrooms recessed on top and side of the outer frame, each rated at 10 tonnes - 50mm drawbar eye - Air suspension - Lift and lower valve - Axle load detection via EBS CAN bus signal - Tyres: 235/75R17.5 - 2 x 7-pin connectors at front - LED revolving beacon - 2 pairs of double warning boards, LED illuminated, extendable to 3m plus advance transport/setup from warehouse 26639 Wiesmoor: €1,280.00 net

Stanje: rabljeno, konfiguracija osi: 3 osi, skupna širina: 25.500 mm, skupna višina: 35.000 mm, Leto izdelave: 2018, Oprema: ABS, = More options and equipment = Gedpfjy Svrgsx Ab Iebn - Rear air suspension - Front air suspension = Notes = For inquiries about the vehicle, Mr. Seidel (by phone) will be happy to assist you. Fliegl DTS 300 low-bed trailer BPW axles, drum brakes, spring-loaded brakes, mechanical ramps, permissible total weight: 24,000 kg, unladen weight: 6,350 kg, payload: 17,650 kg, loading dimensions: L 8,490 mm W 2,510 mm, tire tread: 1st axle 7-12 mm, 2nd axle 7-8 mm, 3rd axle 4-7 mm On request, we can provide you with a leasing or financing offer. Mr. Seidel (tel.) will be happy to assist you. Further information can be found on our homepage. ... Errors, changes, and prior sale excepted!!! = Further information = Unladen weight: 6,350 kg Payload: 17,650 kg GVW: 24,000 kg Please contact Tobias Ebert for more information.

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 05/2015, prostornina tovornega prostora: 55 m³, skupna dolžina: 10.800 mm, skupna širina: 2.550 mm, skupna višina: 3.700 mm, barva: rdeča, Leto izdelave: 2015, Oprema: ABS, = Additional Options and Accessories = - Electronic Brake System (EBS) - Toolbox - Central lubrication system = Notes = Fliegl tipping trailer 55 cubic meters 3 axles Aluminum body Lifting axle Air suspension SAF axles ABS ZSA Roll tarp Platform Combination tailgate Grain discharge chute Tires 60% tread GR 385/65R 22.5 IDNR 362 We look forward to welcoming you for consultation, contract signing, or vehicle pickup at our dealership. Please schedule an appointment. If you are unable to visit our dealership in person, we also offer complete transaction processing via phone/email/WhatsApp/fax. Upon request, we can deliver your new vehicle directly to your door. This means you get the best price, maximum security, and convenience when buying a vehicle. Trade-in We are happy to accept your used vehicle in part exchange. We offer you the option of a digital vehicle evaluation based on your photos without the need to visit the dealership. Our specialized purchasing team guarantees you the highest price. Upon request, we can deliver your new "pre-owned" vehicle throughout Germany directly to your doorstep and pick up your trade-in in return. Financing - Leasing Instant approval and settlement of existing loans. Your specialist partner for passenger cars, vans, commercial vehicles and construction machinery ITC GmbH & Co KG Siemensstraße 7 32312 Lübbecke (Industrial Area) Gbedpfxjyuyrzj Ab Ijn Visit us on our website Over 400 vehicles in stock at all times The details provided in advertisements, on the internet, price tags, and images are non-binding descriptions and do not constitute guaranteed features. The seller assumes no liability/warranty for typographical or data transmission errors. Listed equipment needs to be checked separately if required. The offer generally does not include a new TÜV inspection; we will gladly provide an offer for this from our partner workshop. Subject to error and prior sale. Show less = Further information = Unladen weight: 6,060 kg Payload: 31,940 kg gross vehicle weight: 38,000 kg Body make: Fliegl Tipper direction: Rear Sales price: €17,999, US$20,900

Stanje: novo, številka stroja/vozila: 195f80ad09517628522e33a91, lastna masa: 7.300 kg, največja dovoljena obremenitev: 16.700 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low Loader Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holders Aluminum side underrun protection Rear mudflaps across the entire width Quarter shell fenders in front of 1st axle 1st pair of wheel recesses embedded after the kink in the loading bed area, ramped entry, length at the bottom approx. 1600 mm, approx. 400 mm deep. Note! The frame in the main beam area is 400 mm higher than the wheel recess. 2nd pair of wheel recesses embedded between the axles in the loading bed area, ramped entry, length at the bottom approx. 600 mm, approx. 300 mm deep. Note! The frame in the main beam area is 300 mm higher than the wheel recess. Sliding extensions for widening, extendable to 3,000 mm (not in tail ramp area) (The track width of the construction machines or vehicles to be transported must not exceed the external frame width of 2,550 mm) Sliding extensions for widening, extendable to 3,000 mm, also at the bottom in the wheel recesses, foldable at the wheel recess extensions (extension not in the tail ramp area) (The track width of the construction machines or vehicles to be transported must not exceed the external frame width of 2,550 mm) 70 mm timber planks for extension to 3,000 mm Tie-down points on low loader 1 pair of lashing cutouts embedded in the longitudinal beam at the front in the kink, each rated at 10 t 4 pairs of lashing holes in the outer frame, each rated at 5 t (for attaching tie-down straps) 7 pairs of lashing mushrooms recessed at the top and side in the outer frame, each rated at 10 t 1x at the front in the kink 6x in the loading bed First lashing point 250 mm from the front and last max. 250 mm from the rear, spacing between lashing points no greater than 1,100 mm Drawbar for turntable trailer Drawbar with certified 40 mm towing eye Axles & suspension SAF drum brake axles Laser axle/chassis alignment – reduces tire wear and fuel consumption Parabolic spring suspension with maintenance-free steel-rubber bushings Wheels and tires 235 / 75 R 17.5 Manufacturer's choice Steel rims in twin arrangement, factory silver Braking system 2-line compressed air braking system Spring-applied parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS connector at the front, with connection cable. Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrics 24 Volt, multi-chamber lights, LED side marker lights, 2 white position lights at the front 2 white/red lane guidance lights at the rear 2 x 7-pin fail-safe connectors at the front, with connection cable, Gedpfxji Ri Rvs Ab Iobn 1 LED rotating beacon with holder, switched via side light (removable beacon) 2 pairs of warning panels, double LED illuminated and extendable to 3,000 mm Floor Front kink with steel/checkered plate covering Storage box embedded in the ramp to the kink, then with 70 mm softwood floor, in the wheel arch area with steel/checkered plate covering Tail ramp with 70 mm softwood floor Low loading area including tail ramp: 6,500 mm Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Wood-covered With spring assist Operating Instructions For 10,000 kg axle load an exemption is required, only indivisible loads allowed! The stated gross weight is technically possible, but depending on the type of load, the gross weight may not be achievable within the pe

Stanje: novo, številka stroja/vozila: 2dff0c136c85096f36822a0bb, lastna masa: 7.150 kg, največja dovoljena obremenitev: 16.850 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis - Low-bed Trailer Steel welded construction Turntable with heavy-duty slewing ring, storage box integrated into turntable front section Foldable rear supports 2 wheel chocks with holders Aluminium side underrun protection Full-width rear mudflaps Extendable extensions to 3,000 mm (not at the rear bevel) (Note: The track width of the construction machines or vehicles to be transported must not exceed the external frame width of 2,550 mm) Central storage compartment for timber boards on the loading platform 70 mm timber boards for extension to 3,000 mm Low-bed lashing rings 3 pairs of 10 t lashing points integrated into the front floor 6 pairs of 10 t lashing mushrooms recessed in the top and side of the outer frame 1 x by the neck area The remaining points are distributed at no more than 1200 mm intervals 1 x at the rear bevel 5 pairs of stake pockets recessed in the outer frame, internal dimensions 70 x 40 mm (can be converted to 5 t ring lashing eyes, not included) Drawbar Turntable Trailer Coupling Drawbar with certified 40 mm towing eye Axles & Suspension SAF drum-braked axles Axles/chassis laser-aligned to reduce tyre wear and fuel consumption Parabolic spring suspension with maintenance-free steel-rubber bearings and mechanical Axle load equalisation (rocker balancing) Brake System 2-line compressed air brake system Gedpfx Asi Riy Esb Iebn Coloured line routing for easy service Spring-loaded parking brake included 2 fail-safe coupling heads at the front, with connecting lines to the tractor unit ABS and ALB, with ABS plug at the front, with connecting cable Note: The trailer may only be towed by vehicles ensuring the proper function of ABS! Wheels and Tyres 235/75 R 17.5 Manufacturer’s choice Steel twin wheels, factory silver finish Electrics 24 volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin fail-safe plugs at the front, with connecting cable 1 LED beacon with holder, switched via parking lights (removable beacon) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Steel floor in the front section, followed by 70 mm softwood flooring; wheel arch covers in steel/chequer plate Rear bevel with 70 mm softwood flooring Low-bed area incl. rear bevel 8,200 mm Access Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Wood-covered, included With spring assist Operating Notes An exemption permit is required for 10,000 kg axle load—only indivisible loads allowed! The specified total weight is technically achievable, but depending on the load, the permissible total weight may not be reached due to axle/support/kingpin limits. (Poor driving and tracking may result from incorrect load distribution) Country of Registration/Plates Country of registration: Germany With Dekra inspection and appraisal (according to §13 EU-FGV) 24/7 service hotline Prepared for double-line license plate holder Contour marking with reflective stripes per ECE R 048, white to the side, red to the rear Paintwork Frame DB 7350 Novagrau 10-year guarantee against rust-through Drawbar galvanized or black, manufacturer's choice Access ramps hot-dip galvanized Note: Archive images!

Stanje: novo, številka stroja/vozila: ede0610378cbe39cc4883251d, lastna masa: 24.000 kg, največja dovoljena obremenitev: 7.550 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further information Gbsdpfx Aji Ri Ryeb Ijn Chassis Low-loader Trailer Steel welded construction 1st pair of wheel recesses embedded in the driving lane area after the steel platform, bevelled for entry, approx. 1,400 mm long at the bottom, approx. 400 mm deep. Note! Frame is 400 mm higher in the main beam area than at the wheel recess. If machines are to be transported where overall height must be verified, we request a technical data sheet for the machine types with precise specifications (if overall height is exceeded -> customer is responsible, approval required). Depending on ground clearance under the machines, inserts for the wheel recesses may be required on the customer side. Turntable with robust ball race ring, storage box integrated in the turntable front section Rear supports foldable 2 wheel chocks with holder Aluminium side underrun protection Full-width rear mudflap Extending wideners to 3,000 mm (not in rear bevel area) (The track width of the construction machines or vehicles to be transported must not exceed the outside frame width of 2,550 mm) Central storage compartment for wooden planks on loading area 70 mm wooden planks for widening to 3,000 mm Lashing eyes low-loader 3 pairs of 10 t lashing points integrated in the floor at the front incl. 6 pairs of lashing mushrooms recessed on top and at the side in the outer frame, each 10 t 1 x at the gooseneck The remaining distributed between, spacing not greater than 1,200 mm 1 x rear bevel 5 pairs of stake pockets integrated into the outer frame, internal 70 x 40 mm (convertible to 5 t ring lashing eyes, not included) Drawbar assembly trailer turntable Drawbar with tested 40 mm towing eye Axles & Suspension SAF drum-braked axles Axles/chassis laser aligned to reduce tyre and fuel wear Parabolic suspension with maintenance-free steel-rubber bearings Brake system 2-line compressed air brake system Colour-coded piping for easy service Spring loaded parking brake 2 interchange-proof coupling heads at the front, with connecting lines to the tractor unit ABS and ALB, with ABS plug at the front, with connection cable Note: The trailer may only be towed by tractor units which ensure the functionality of ABS! Wheels and tyres 235 / 75 R 17.5 Manufacturer’s choice Steel rims in twin arrangement, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED illumination 2 white position lights at front 2 white/red track marker lights at rear 2 x 7-pin interchange-proof plugs at front with connecting cable 1 LED beacon with bracket, switched via parking light (removable lamp) 2 pairs of double warning boards, LED-lit and extendable up to 3,000 mm Floor Front area steel floor, incl. Then with 70 mm softwood floor, in wheel arch area steel/chequer plate covering Rear bevel with 70 mm softwood floor Low-loader deck incl. rear bevel 8,200 mm Loading ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable Wood-covered With spring lifting aid Operating instructions For 10,000 kg axle load, a special permit is required, only indivisible loads possible!!! The specified total weight is technically possible; depending on the load, the total weight may not be achievable while complying with permissible axle/kingpin/saddle loads. (Poor driving and tracking behaviour possible due to incorrect load distribution) Country of registration / Plates Country of registration: Germany incl. With Dekra approval and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for two-line number pla

Stanje: novo, številka stroja/vozila: d461243f559015adca5bb372c, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-bed Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holders Aluminium side underrun protection Full-width rear mudflap Half-shell mudguards on 1st axle with anti-spray mudflaps Anti-spray mudflaps behind 2nd and 3rd axle 1 plastic toolbox with shelf, dimensions: W=620/H=360/D=440 mm, lockable with a padlock Extendable width up to 3,000 mm Central storage compartment for timber planks on loading area 70 mm timber planks for widening to 3,000 mm Lashing rings for low-bed (40 lashing points) 1 pair of lashing apertures recessed in the front longitudinal beam at the gooseneck, each rated for 10 t 4 pairs of lashing holes in the external frame, each rated for 5 t (for lashing strap hooks) 7 pairs of lashing mushrooms embedded on top and side of the outer frame, each rated for 10 t 1 at the front on the gooseneck 6 in the low-bed section First lashing ring 250 mm from the front, last max. 250 mm from the rear, spacing between lashing rings not greater than 1,100 mm 5 pairs of stake pockets embedded in the external frame, internal dimensions 70 x 40 mm (convertible to 5 t ring lashing eyes) 2 pairs of additional folding lashing eyes, each rated for 10 t 1 on the gooseneck (protruding) 1 recessed behind the last axle Drawbar coupling for turntable trailer Drawbar with certified 40 mm towing eye Axles + Suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker equalizer) Wheels and tyres 235/75 R 17.5 Manufacturer's choice Steel rims in twin configuration, factory silver Braking system 2-line pneumatic braking system Spring-actuated parking brake 2 fail-safe coupling heads at the front, with connecting lines to towing vehicle ABS and ALB, ABS connector at the front with connecting cable Brand: Wabco, Knorr or Haldex Electrics 24 Volt, multi-chamber rear lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marking lights at the rear 2 x 7-pin fail-safe plugs at the front, with connecting cable Gsdji Ri Dljpfx Ab Iebn 1 LED beacon with bracket, controlled via parking lights (removable beacon) 2 pairs of warning boards, double, LED illuminated, extendable to 3,000 mm Floor Gooseneck front with steel tread plate covering Storage box recessed in the transition to the gooseneck Followed by 70 mm softwood flooring, wheel arch areas with steel tread plate covering Rear chamfer with 70 mm softwood flooring Low-bed area incl. rear chamfer: 6,500 mm Loading ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable Timber-layered Hydraulically operated via tractor PTO with throttle, operated from left-hand side, front Hydraulic connection with SVK coupling NW 10/3, including connecting hose Country of registration / Plates Country of registration: Germany 24/7 service hotline Prepared for two-line number plate holder Contour marking with reflective strips according to ECE R 048, white on the side and red at the rear Warning board according to ECE - 70 Paintwork Frame hot-dip galvanized incl. passivation 15-year warranty against rust-through Drawbar galvanized or black, at manufacturer's discretion Loading ramps hot-dip galvanized Note: These are archive images!

Stanje: novo, številka stroja/vozila: 628cde0fe99cc2d3c8eaa8dd8, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-Loader Trailer Steel welded construction Turntable with robust ball bearing slewing ring Foldable rear support 2 wheel chocks with holder Side underrun protection made of aluminium Full-width rear spray flap Half-shell mudguards on 1st axle with anti-spray flaps, anti-spray flaps behind 2nd and 3rd axle 1 plastic toolbox with shelf, dimensions: width=620 mm / height=360 mm / depth=440 mm, lockable with padlock (padlock not included) Extendable width up to 3,000 mm Storage compartment for wooden planks in the centre of the loading area 70 mm wooden planks for extension to 3,000 mm Tie-down lugs for low loader (40 lashing points) 1 pair of lashing cut-outs in the longitudinal beam at the front, recessed into the gooseneck, each rated at 10 t 4 pairs of lashing holes in the outer frame, each rated at 5 t (for securing with lashing straps) 7 pairs of lashing mushrooms, recessed at the top and side of the outer frame, each rated at 10 t 1 at the front on the gooseneck 6 in the low bed First lashing point 250 mm from the front, last max. 250 mm from the rear, spacing between lashing points not greater than 1,100 mm 5 pairs of stake pockets recessed in the outer frame, interior dimensions 70 x 40 mm (convertible to 5 t ring lashing points, not included) 2 additional pairs of folding lashing rings, each rated at 10 t 1 on the gooseneck (protruding) 1 behind the last axle, recessed in the floor Towing Device Turntable Trailer Drawbar with certified 40 mm towing eye Axles and Suspension Drum brake axles, manufacturer’s choice Axle/chassis laser alignment to reduce tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalisation (rocker equalisation) Wheels and Tyres 235 / 75 R 17.5 Manufacturer’s choice Steel rims, twin arrangement, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front with connecting lines to the tractor unit ABS and ALB, with ABS socket at the front and connecting cable Manufacturer: Wabco or Knorr Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane lights at the rear 2 x 7-pin non-interchangeable plugs at the front with connecting cable 1 LED beacon with bracket, switched with parking lights (removable beacon) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Gooseneck at the front with steel/chequer plate covering Toolbox recessed into transition slope to gooseneck Following area with 70 mm softwood floor, steel/chequer plate in wheel arch area Rear taper with 70 mm softwood floor Low-loader deck including rear taper: 6,500 mm Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Timber surfaced With spring lift assistance Country of Registration / License Plates Country of registration: Germany 24/7-Service Hotline Prepared for two-line license plate holder Contour marking with reflective strips according to ECE R 048, white on sides, red at rear Warning sign according to ECE-70 Painting Frame hot-dip galvanized including passivation Gbodpfxji Ri Dde Ab Ijn 15 years’ warranty against corrosion perforation Drawbar galvanized or black, manufacturer’s choice Loading ramps hot-dip galvanized Attention! Archive images shown!

Stanje: novo, številka stroja/vozila: f8fb99947a1c19bc4d63549ff, lastna masa: 6 kg, največja dovoljena obremenitev: 17 kg, skupna masa: 24 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-bed Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Rear foldable support 2 wheel chocks with holders Side underrun protection in aluminium Full-width rear mudflap Half-shell mudguards on the 1st axle with anti-spray mudflaps; anti-spray mudflaps behind 2nd and 3rd axles 1 plastic toolbox with shelf, dimensions: width 620 mm, height 360 mm, depth 440 mm, lockable with padlock (padlock not included) Extendable width up to 3,000 mm (not at rear slope) (track width of machines or vehicles to be transported must not exceed external frame width of 2,550 mm) Central storage compartment for timber planks on the loading platform 70 mm timber planks for widening to 3,000 mm Tie-down eyes for low-loader: 1 pair of flush-mounted ring lashing eyes at the front on the swan neck, each rated at 5t 7 pairs of lashing mushroom pins, recessed on top and sides of outer frame, each rated at 10t 1x front on swan neck 6x in low bed area First lashing eye 250 mm from the front and last max. 250 mm from the rear, distance between lashing eyes not more than 1,100 mm 5 pairs of stake pockets recessed in the outer frame, internal dimensions 70 x 40 mm (convertible to 5t ring lashing eyes, not included) 2 additional pairs of foldable lashing eyes, each rated at 10t 1x on swan neck (protruding) 1x behind the last axle, recessed in the floor Drawbar assembly for turntable trailer: Drawbar with certified 40 mm towing eye Axles & Suspension SAF drum brake axles Axle/chassis laser alignment to reduce tyre wear and fuel consumption Parabolic springs with maintenance-free steel-rubber bushings and mechanical axle load equalisation (rocker compensation) Wheels and Tyres 235/75 R 17.5 Manufacturer's choice, with M&S marking Steel rims in twin arrangement, factory silver finish Braking System 2-line compressed air braking system Spring-actuated parking brake 2 foolproof coupling heads at the front, with connecting lines to the towing vehicle ABS and ALB, with ABS socket at the front and connecting cable Brand: Wabco or Knorr Note: The trailer may only be towed by vehicles that ensure the proper functioning of the ABS! Electrics 24 Volt, multi-chamber lights, yellow LED side marker lights 2 white position lights at the front 2 white/red lane departure lights at the rear 2x 7-pin foolproof plugs at the front with connecting cable 1 LED beacon with bracket, switched via parking lights (lamp removable) 2 pairs of warning boards, double LED illuminated and extendable to 3,000 mm Floor Front swan neck with steel chequer plate covering Storage box recessed in the approach slope to the swan neck Then 70 mm softwood flooring, in wheel arch area with steel chequer plate Rear slope with 70 mm softwood flooring Low-bed area incl. rear slope 6,500 mm Loading Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Additional ramp safety device, foldable at the bottom (prevents lateral displacement of ramps, not in combination with laterally hydraulic ramp adjustment) Wooden covering Spring-assisted lifting support Operating Instructions Gbedsi Riwfepfx Ab Ijn At 10,000 kg axle load, a special permit is required, only indivisible loads allowed! The specified total weight is technically possible, but depending on the cargo, the total weight may not be achievable while complying with the permissible axle, support, and king pin loads (poor handling or tracking may result from incorrect load distribution) Country of Registration / Pla