Izmenljivi nadgradnja s kesonsko nadgradnjo nakup rabljenega (132)

Stanje: rabljeno, barva: bela, skupna masa: 16.000 kg, največja dovoljena obremenitev: 13.230 kg, lastna masa: 2.770 kg, prostornina tovornega prostora: 39 m³, širina tovornega prostora: 2.480 mm, dolžina tovornega prostora: 7.020 mm, višina nakladalnega prostora: 2.260 mm, vrsta prenosa: drugo, vzmetenje: drugo, velikost pnevmatike: ohne, velikost sprednje pnevmatike: ohne, velikost zadnje pnevmatike: ohne, voznikova kabina: drugo, emisijski razred: noben, Osnovna barva: bela, Vzmetenje: drugo, Nosilnost (kg): 13.230 Bsdoxcvf Sspfx Abvjld Tip nadgradnje: gladka stena – menjalna kesonska nadgradnja, Notranje mere D x Š x V: 7.020 x 2.464 x 2.248 mm, Zadnja portalna vrata, 3 vrste stranskih veznih letev, Lesena obloga ob straneh in spredaj, Lakiranje v redu – potrebno je le čiščenje.

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, barva: bela, 7.82 BDF Krone smooth-wall swap body with portal doors, used (multiple units available) Drop-off height: 1120 mm The swap body is weatherproof. External dimensions (approx. in mm): Length 7820 Width 2550 Height 2925 Internal dimensions (approx. in mm): Length 7700 Width 2480 Height 2700 Lashing: Keyhole type 4 container corner castings on 20' base, symmetrical overhangs 4 grab handle rails Bledpfxjwbgrpo Abvod Floor Type: BO WST 27 mm thick, waterproof bonded phenolic plywood floor, strength to DIN EN 283; suitable for floor loads up to max. 5,460 kg forklift axle load Body Internal height: approx. 2700 mm Overall height: approx. 2,925 mm Corner height: approx. 2,900 mm Closed box body Smooth side panels made of galvanized steel sheet cassettes Roof made of trapezoidal profiled steel sheet, construction height: 25 mm 2 ventilation louvres per side wall Scuff rail and side wall with cut-outs Internal three-sided forklift impact protection, approx. 300 mm high Front wall smooth made of galvanized steel sheet cassettes Front wall inside with 21 mm phenolic plywood, 750 mm high, above this a continuous 12 mm phenolic plywood Upper outer front wall with offset (optimized for cornering) Internal sidewalls entirely covered with keyhole plates 13 recessed steel guide rails on each side to accommodate double deck load beams LM load beams for double deck loading Horizontal steel impact protection on the rear profile left and right Note: Actual dimensions and other specific details may vary slightly from the above information due to continuous product improvement.

Stanje: rabljeno, barva: črn, največja dovoljena obremenitev: 18.000 kg, lastna masa: 2.585 kg, širina tovornega prostora: 2.480 mm, dolžina tovornega prostora: 9.195 mm, številka stroja/vozila: WKEAZ000001090172, Poškodba na levi strani vozila: levi stranski podvozni zaščitni drog je deformiran in udrt, zadnji levi blatnik ter plastičen pokrov zadnjega levega podvoznega zaščitnega droga z odrgninami, pokrovi matic koles spredaj in zadaj levo delno manjkajo oziroma so zlomljeni. Prednji kabel za povezavo je popravljen/pokrpan in ima odrgnine. Sprednji desni podvozni zaščitni drog je deformiran in stisnjen. Prisotne sledi uporabe. Bledpfx Ajw Rpzdsbvsd

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, barva: bela, 7.82 BDF Krone smooth-sided swap body, used (Multiple units available) Color: White Support height: 1120 mm The swap body is watertight, and the roller shutter door operates smoothly. External dimensions (approx., mm): Length 7820, Width 2550, Height 2925 Internal dimensions (approx., mm): Length 7700, Width 2480, Height 2700 Blodjvxbfmspfx Abvod Door openings (mm): Width 2370, Height 2530 Lashing: Keyhole slotted Maximum permissible gross weight for approval/operation: 16,000 kg Intermodal suitable, incl. railway codification according to DIN EN 13044 Railway approval Code XL (for rail transport over 120 km/h) Floor frame: 195 mm high substructure including floor; rectangular tube longitudinal beams with cross members and outer frame as a welded assembly, with bottom-mounted guide tunnel 4 container corner castings, 20' basis, symmetrical overhangs 4 grab bar strips 7 pairs of lashing rings mounted laterally in rubbing strip Floor: Type: BO WST 27 mm thick, water-resistant bonded phenolic plywood floor, strength per DIN EN 283; suitable for floor loads up to max. 5,460 kg forklift axle load 2 ventilation openings at the front end in the floor (per GGVS) Box structure: Construction type: AB WST Internal height: 2700 mm Portal opening height (internal): 2525 mm Total height: 2925 mm Corner height: 2900 mm Closed superstructure Side walls: smooth, made of galvanized steel cassette panels Roof: trapezoidal-profiled steel sheet, construction height: 25 mm 2 ventilators per side wall Rubbing strip and side wall with cutouts Interior anti-collision guard for forklift, three-sided, approx. 300 mm high Front wall: smooth, galvanized steel cassette panels Interior front wall: 21 mm phenolic plywood, 750 mm high, above that a continuous 12 mm plywood panel Exterior front wall: offset at top (optimized for curving) Rear wall: roller shutter (clear width 2370 mm), with DB Train Plus approval, rollers replaceable Flat steel anti-collision protection for roller shutter guide rails Side walls fully lined with keyhole perforated plates on the inside 13 steel guide rails recessed left and right for double-deck load beams 13 aluminum load beams for double-deck loading Horizontal steel anti-collision protection on the rear profile, left and right Note: Actual dimensions and specific details may vary slightly due to ongoing product improvements.

Stanje: rabljeno,

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, 7.82 m BDF Krone smooth-sided swap body, used (multiple units available) Blsdpjvv R Ifsfx Abvjd The exterior of the swap body, including the roof, will be painted in the customer’s chosen color (standard RAL shade). The substructure and parts of the support legs are not painted, as these are not visible once the unit is set down. Set-down height: 1120 mm The swap body is watertight, and the roller shutter operates smoothly. External dimensions (approx. in mm): Length: 7820 | Width: 2550 | Height: 2925 Internal dimensions (approx. in mm): Length: 7700 | Width: 2480 | Height: 2700 Door openings (in mm): Width: 2370 | Height: 2600 Lashing: Keyhole system For registration/operation max. permitted gross weight: 16,000 kg Suitable for intermodal transport, including rail coding as per DIN EN 13044 Rail approval: Code XL (for rail transport over 120 km/h) Floor frame: 195 mm high floor assembly including floor; longitudinal beams made of rectangular pipe with cross members and outer frame as welded construction with bottom guide tunnel 4 container corner castings on 20’ basis, symmetrical overhangs 4 gripper bar strips 7 pairs of lashing rings along the side rubbing rail Flooring: Type: BO WST 27 mm thick, waterproof, bonded phenolic plywood floor, strength according to DIN EN 283; floor load up to max. 5,460 kg fork axle load 2 ventilation openings in the front floor section (per GGVS) Box body: Type: AB WST Internal height: 2700 mm Portal height internal: 2525 mm Overall height: 2,925 mm Corner height: 2,900 mm Sealed body Side walls made from smooth, galvanized steel cassette panels Roof made of trapezoidal-profile steel sheet, height: 25 mm 2 ventilation slots per side wall • Rubbing rail and side wall with cut-outs for internal forklift collision guard, 3-sided, approx. 300 mm high • Front wall smooth, made from galvanized steel cassette panels • Front wall inside with 21 mm phenolic panel, 750 mm high; above that, a continuous 12 mm phenolic panel • Front wall outside, top section with offset (optimized for cornering) • Rear wall with roller shutter (internal width: 2370 mm), DB homologation Train Plus, replaceable rollers • Flat steel protection for roller shutter guide rail • Interior side walls fully fitted with keyhole rail sheets • 13 recessed steel guide rails on both left and right sides for double-deck loading beams • 13 LM loading beams for double-deck loading • Horizontal steel collision guard on rear profile, left & right Attention: Actual dimensions and other specific details may vary slightly due to ongoing product improvements.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, barva: bela, 7.45 m BDF Krone Jumbo smooth side swap body, used Exterior color: White Parking height adjustable from 920–1320 mm. The swap body is watertight and the roller shutter door operates smoothly. Forklift pockets Stackable External dimensions (approx., in mm): Length 7450 x Width 2550 x Height 2950 Internal dimensions (approx., in mm): Length 7289 x Width 2470 x Height 2700 Door openings (in mm): Width 2370 x Height 2550 Lashing: Keyhole type Weight: Tare 3340 kg Bjdsuvibtepfx Abveld Maximum payload: 12,660 kg Gross weight: 16,000 kg Floor load capacity: 5,460 kg Volume: 49.74 m³ Pallet capacity (in mm): Euro 800x1200: 18 Metric 1000x1200: 14 Gitterbox 835x1240: 16 “Aussie” 1170x1170: 12 Note: Actual dimensions and other specific details may vary slightly from the above due to ongoing product improvements.