Teleskopska delovna ploščad

Haulotte HA 15 IP 2 Pieces!

Stanje: rabljeno, Leto izdelave: 2019, obratovalne ure: 204 h, vrsta goriva: električni, Haulotte HA 15 IP. Leto: 2019. Delovni čas: 204 ure. Teža: 7300 kg. CE oznaka. Maksimalna nosilnost košare: 230 kg / 2 osebi + 70 kg. Maksimalna bočna sila: 400 N. Maksimalna hitrost vetra: 12,5 m/s. Maksimalno dovoljeni nagib: 3 stopinje. 10,7 kW, popolnoma električen. Košara se lahko vrti. Maksimalna delovna višina: 15 metrov. Maksimalni doseg: 8,65 metra. Nwsdpfx Aez Eth Tjb Del Pnevmatike, ki ne puščajo sledi: 23x10-12. Na voljo 2 kosa. Številka: 291. Splošni pogoji poslovanja družbe Heinhuis veljajo za vsa oglaševanja, ponudbe in cenitve družbe Heinhuis, za vsa sklenjena sporazuma s strani družbe Heinhuis in za pogajanja, ki predhodijo sklenitvi sporazuma. S kakršnim koli odgovorom potrjujete veljavnost splošnih pogojev poslovanja družbe Heinhuis in izjavljate, da ste se seznanili s temi splošnimi pogoji poslovanja. Naše cene so izvozne neto cene. = Dodatne informacije = Leto proizvodnje: 2019. Pogonski sistem: kolesa. Maksimalna dovoljena teža (zGG): 7.300 kg. Vrsta masta: zložljiv. CE oznaka: da. = Informacije o podjetju = Za več informacij:

Stanje: rabljeno, moč: 55,4 kW (75,32 KM), vrsta goriva: dizel, barva: rdeča, dvižna moč: 4 kg/m, dvižna višina: 18.000 mm, velikost pnevmatike: 15.5 / 80 - 24, stanje pnevmatik: 98 odstotek, konfiguracija osi: 4x4, tip droga: teleskopski, Leto izdelave: 2018, obratovalne ure: 907 h, Oprema: hidravlika, kabina, pogon na vsa štiri kolesa, spojka prikolice, vilice za palete, Rough terrain telescopic handler MANITOU, model: MT 1840 ST3B TURBO - 4x4x4, first commissioned in 2019, LIFTING CAPACITY: 4,000 kg, LIFT HEIGHT: 18.00 m, LONG FORKS (fork length: 1,200 mm / carriage width: 1,100 mm) – AUXILIARY HYDRAULICS, LOAD BACKREST, QUICK COUPLER, 4-cylinder DEUTZ turbo diesel engine (model: TD 3.6 L4 – 75.34 HP / 55.40 kW at 2,200 rpm), CPB, FOUR-WHEEL DRIVE and FOUR-WHEEL STEERING (4x4x4) – CRAB STEERING, hydraulic stabilizers (2x), LATERAL LEVELING SYSTEM, OVERLOAD WARNING DEVICE, PANORAMIC CABIN (spacious driver's cab) – tinted safety glass, ROPS / FOPS, operator comfort seat, trailer coupling, road lighting, twin windscreen wipers, dual exterior mirrors, AUDIBLE ALARM / WARNING BEACON, heating / ventilation, OPERATING INSTRUCTIONS (in German). Tyres: BKT OFF-ROAD TYRES (15.5/80 - 24) – approx. 98% tread remaining. Transport dimensions: length approx. 7,420 mm (approx. 6,100 mm without forks), width approx. 2,400 mm, height approx. 2,540 mm. FINANCING OPTIONS AVAILABLE / AFFORDABLE WORLDWIDE TRANSPORT / FOR EXPORT, NET PRICE ONLY (!) Nwjdpfxor Nvx He Ab Dsl

Stanje: rabljeno, Leto izdelave: 1998, obratovalne ure: 7.950 h, Oprema: pogon na vsa štiri kolesa, MF Femtec 860 B backhoe loader from municipal ownership, always regularly serviced. 70 kW (95 hp). Rear excavator laterally displaceable with telescopic extension. Bucket accessories: 60 cm and 30 cm trench buckets, 1.6 m ditch clearing bucket, and additional triangular ditch clearing bucket. 4-in-1 front bucket with teeth. Tyres 70%. 4-speed powershift gearbox with torque converter, shuttle shift on steering column, all-wheel drive, differential lock, rotating operator seat, sliding windows. Perkins 4-cylinder turbo engine. The machine is in good condition and ready for use. Njdsv A Dgzjpfx Ab Dswl VAT not deductible. Phone: Email: josef. Location: 97778 Fellen/Rengersbrunn

Stanje: novo, Leto izdelave: 2022, Oprema: pogon na vsa štiri kolesa, New machine Manufacturer: FAE Type: Radio-controlled Mulching Crawler Model: RCU 55 Standard equipment: - Engine: Kohler KDI 1903 with turbocharger and intercooler - Exhaust aftertreatment: DOC/DPF - Hydrostatic drive system - Hydrostatic drive for attachments - Auxiliary hydraulics for implements - Load control function - Quick-attach plate with tilt and float system - Independently hydraulically adjustable track width 1350 mm – 1750 mm - High-profile rubber tracks and bogie roller system - Combination aluminium radiator with anti-clogging fins - Proportional reversible fan with hydraulic control - Ergonomic joystick controls - 3.5-inch LCD colour display on remote control - Remote control with two batteries and onboard charger - 7-inch LCD colour display on the machine - LED work lights Technical specifications: - Engine power: 56 hp - Emission level: EU Stage V - Travel pumps: 2 – EP control – 28 cc – Danfoss - Travel motors: 2 – HY control – 30 cc – Danfoss - Max. travel pressure: 325 bar - Attachment pump: 1 – EP control – 32 cc – Danfoss - Max. mulcher pressure: 300 bar - Hydraulic oil tank: 47 l - Fuel tank: 42 l - Undercarriage: 72 pitch – 250 mm width – high profile Nodpfx Abor Ivznj Dswl - Track rollers: 5 + 5 HD style – triple flange – bogie system (4 + 4) - Front idler/tensioning group: triple flange – automatic tensioning system - Voltage: 12 V - Max. forward speed: 7 km/h - Max. reverse speed: 7 km/h - Climbing ability: 55° – all directions - Operating weight: 2340 kg (standard equipment, std. tracks) - Ground pressure: 0.36 kg/cm² Attachments – Forestry Mulcher - Type: BL1/RCU 125 - Working width: 1240 mm - Overall width: 1532 mm - Weight: 560 kg - Rotor diameter: 310 mm - Number of blades: Mini C/3 – 24 pcs Attachments – Flail Mower - Type: PML/RCU 150 - Working width: 1496 mm - Overall width: 1724 mm - Weight: 410 kg - Rotor diameter: 355 mm - Number of flails: PML hammer flails – 24 pcs

Stanje: rabljeno, lastna masa: 10.900 kg, največja dovoljena obremenitev: 43.600 kg, skupna masa: 54.500 kg, konfiguracija osi: > 3 osi, prva registracija: 04/2025, dolžina tovornega prostora: 8.700 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 855 mm, velikost pnevmatike: 245/70 r17.5, barva: siv, Leto izdelave: 2025, obratovalna teža: 10.900 kg, Oprema: ABS, Gooseneck, rigid, center tube design: - Closed outer frame with cutouts for lashing straps (LC 1,500 daN) - Steel floor with anti-slip coating - Including perforated rail for aluminum approach ramps - 2" king pin - Manually operated BPW landing legs - 550 mm long, 8° chamfer at end of gooseneck - Front wall including park position for rear wall, 400 mm high - Spare wheel holder mounted vertically on the front side of the gooseneck - 3 pairs of recessed lashing rings (LC 5,000 daN) in the loading area of the gooseneck - Aluminum side boards, 400 mm high, comprising 2x side boards each 3,150 mm long, and rear board with stanchions (galvanized) - Rectangular aluminium toolbox with folding lid, lockable, approx. 400 x 800 mm, center - 45’ aluminium toolbox with folding lid, lockable, approx. 400 x 800 mm, left - 45’ aluminium toolbox with folding lid, lockable, approx. 400 x 800 mm, right Loading platform, single-extendable: - Closed outer frame with cutouts for lashing straps (LC 1,500 daN) - Fixed section at front 700 mm - Steel plate floor with anti-slip coating - Chamfered transition between fixed part and deck for bridging rails and wheel recesses - Excavator trough including elongated holes for load securing (LC 1,500 daN), length approx. 3,850 mm - Prepared for hydraulic ramps (electrical supply) - Rails to widen up to 3,000 mm - 8° chamfered vehicle rear, 550 mm long - Slide system for easy mounting/dismounting of ramps - Continuous mud flap at the rear - 1 pair of lashing points LC 10,000 daN centrally on the loading area behind the gooseneck - 7 pairs of lashing points LC 10,000 daN in the outer frame of the loading platform - 6 pairs of stanchion pockets 100 x 50 mm in the outer frame of the loading platform - 1 pair of lashing points LC 10,000 daN centrally in the rear section of the loading platform - 1 pair of stanchion pocket rails approx. center of the loading area - 1 pair of stanchion pocket rails on the fixed part - 1 pair of stanchion pocket rails behind the last axle Ramps: - Hydraulic double-folding ramps, 2,750+1,500x800 mm - Larch wood surface - Operated by remote control (wired and wireless) - Quick-change ramp (dismantling system) Chassis: - Axle brand: BPW ECO Max - 2 ride heights - 4 axles @ 10 t (technically 12 t) Nsdpfxoi Ai E Ro Ab Dswl - Twin tires 245/70 R17.5 - 2 x rigid axles and 2 x friction-steered axles - Reverse steering lock for friction-steered axles via reverse gear - Brake system by Knorr (according to EU standards with EBS-E) - Knorr TIM G2 (Trailer Information Module) - RSS (Roll Stability Support) stability control - Load-dependent lift axle on the first axle incl. starting aid (forced lowering of lift axle via TIM possible) Accessories: - 4 wheel chocks with holder - 2 pairs of warning panels 423 mm x 423 mm, with 2 position lights and socket for rotating beacon, steplessly adjustable up to 3,950 mm - Securing points on gooseneck and on loading platform (alternatively on ramp, if available) included - Plug-in bulkhead at the end of the excavator trough - Electrohydraulic unit for ramp operation - Ramp control by wireless remote - Hydraulic rear support legs for stabilization during loading - 1 pair of additional reversing lights at the rear, activated when reversing - Larch wood widening planks (option)

Stanje: rabljeno, prevoženi kilometri: 1.091.180 km, moč: 375 kW (509,86 KM), prva registracija: 11/2014, vrsta goriva: dizel, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, zavore: retarder, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, Leto izdelave: 2014, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, parkirni grelec, * Daf XF 510 * Zaviranje s pomočjo retarderja * Statična klima * Novo tehnično pregledano pri DAF * Letnik 2014 * Prevoženih kilometrov: 1091188 * VIDEO: Tovornjak je pripravljen za vožnjo na dvorišču * Okvara motorja, pritisk v vodnem sistemu * Okvara motorja, pritisk v vodnem sistemu * Motor je bil obnovljen pri 950000 km pri DAF servisu * XLRTEH4300G046773 * Tel/ Whatsapp/ Viber: Aleksander Ilić * Tel/ Whatsapp/ Viber (angleško): Mladen Ilić * Več tovornjakov, gradbenih strojev in drugih strojev najdete na naši spletni strani: * / Nsdpfxsx Nz Ize Ab Djwl * Odkrijte več tovornjakov, gradbenih strojev in drugih strojev na naši spletni strani: * / * Odpiralni čas od ponedeljka do petka: 07:30–12:00, 13:00–18:00, ob sobotah: 07:30–17:00

Stanje: novo, lastna masa: 15.420 kg, največja dovoljena obremenitev: 61.080 kg, skupna masa: 76.500 kg, konfiguracija osi: > 3 osi, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 900 mm, velikost pnevmatike: 235/75/r17,5, barva: siv, Oprema: ABS, Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading Platform: Extendable loading platform with rear chamfer approx. 500 mm x 8° 8 pairs of flip-out lashing rings 1 pair of recessed lashing rings at the front of the loading area Cutouts in the outer frame for securing straps Approx. 48 mm thick hardwood flooring; checker plate above the axles Two-Part Steel Ramps: One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering. Ramps with hydraulically folding ramp sections, hydraulic lifting and hydraulic lateral movement. Max load per pair: 50,000kg. Landing Legs: • JOST landing legs (mechanical) with two-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: BPW axles and suspension, 4th and 5th axle self-steering Technical axle load: 12,000 kg 4th and 5th axle with electromagnetically operated reverse lock, activated by reverse gear and manually Tyres: 235/75 R 17.5 3PMSF Brake System: Brake system according to EU regulations with EBS-E (4S3M) Sockets and Lighting: Electrical system according to EU standards, 24 Volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets Connections per ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paintwork: Premium and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by two-component (2K) zinc-rich primer High-quality single-colour 2K topcoat in MB 7350 Novagrau Rear section metallized and painted in RAL 9010 (pure white) No metallic paint finish possible Steel Structure: High-strength fine-grained steel construction Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Accessories: One spare wheel with holder in front of the front wall 2" king pin Galvanized steel front wall approx. 400 mm high Yellow-red air couplings on the galvanized front connection panel 2 wheel chocks with holder on the front wall Mounting at the rear of the gooseneck for ALU approach ramps Bracket for beacon at trailer rear Galvanized supports under sloped area of load floor White reflective tape per EU regulations on sides, extension, and red at the rear Electro-hydraulic unit under the rear of loading platform Warning sign brackets including sockets left/right on gooseneck and rear plate Nwedpsl Sl Izefx Ab Del Control valves for ramps mounted right side of trailer Mudflap at rear of trailer Manual and documentation on USB stick 3.5" loose king pin supplied On gooseneck: ALU side boards and rear wall, plug-in approx. 2,440 x 400 mm (LxH) Removable rear galvanized stakes (Body length approx. 2,560 mm) 3 pairs WADER container pockets for 1x 20'/30' or 1x 40' container 6 pairs stake pockets for 100 x 50 mm plug-in stakes in outer frame Galvanized extensions, extendable by approx. 230 mm per side Lift axle on front axle, controlled via TEBS E according to actual axle load and current payload Square climbing strips 20 x 20 mm every 200 mm on outer frame chamfer of load floor Checker plate coverings above the king pin and loading area...

Stanje: novo, prostornina tovornega prostora: 14 m³, Leto izdelave: 2026, Vacuum Roll-off Container 10 m³ Suction Tank / Vacuum Tank · On subframe DIN 30722 – length 6060 mm · Steel tank with 10,000 liter capacity · Container and subframe hot-dip galvanized · Continuous welded corner frame along total length · Rated for max. 0.5 bar pressure · Rated for max. 1.0 bar vacuum · 2 liquid separators · Safety system: manhole lid, control valve with safety manhole and overflow valve · Mechanical level indicator with scale · 2 internal baffle walls with T-section reinforcement ring · Suction connection on rear base 4" x Ø108 Perrot coupling · Suction connection on left side 4" x Ø108 Perrot coupling · Lockable storage boxes left and right with lid for hoses and tools · Engine unit is positioned at the front between the tank and roll-off hook Compressor: MECII 9000 Ballast System Nwedpfsl Ixwlsx Ab Dol · Vacuum compressor with air injection cooling · Heat-resistant vanes · Crash protection system · Max. output: 9,000 liters/minute · Max. pressure: 0.5 bar · Max. vacuum: -0.95 bar · Continuous operation permissible at -0.6 bar · Automatic lubrication · Lubricating oil tank 2.5 liters · Oil level indicator Engine: • Briggs & Stratton Vanguard • 31 HP / 23.1 kW • Two-cylinder V-engine, 4-stroke • OHV valve control • Electric start • 12-volt battery • V-belt drive incl. guard • Fully mounted on console • Lockable enclosure for theft protection High-pressure cleaner: • Working pressure: 30-150 bar • Cleaning performance: 13 l/min • With original Honda engine • Automatic high-pressure hose reel • With 15 m HD hose DN08 • Cleaning lance • Dirt blaster • 2 plastic tanks, each 500 liters For technical data and further information, please contact us. delivery worldwide, dealer inquiries welcome Special constructions and custom equipment available on request, please contact us. Pictures are sample images, for current images please contact us: Tel.: +49 (0)2723 717 61-0 or via email: anfrage(ât)altro-tec.de

Stanje: rabljeno, prva registracija: 08/1998, skupna dolžina: 16.000 mm, skupna širina: 2.550 mm, Leto izdelave: 1998, GOLDHOFER STZ -TL 3 -33/80 3-osna polprikolica z upognjenim (labodjim vratom) SEMI, s 3 krmiljenimi osmi, z znižljivo ploščadjo in hidravličnimi rampami Nedpowpknwsfx Ab Dewl PRIKOLICA JE BILA PESPESKANA IN LAKIRANA!! • ABS • 3 x BPW ECO-Plus osi z zračnim vzmetenjem • 3 x krmiljene osi • Dvižno/spustno napravo • Hidravlične, dvodelne vzponske rampe • Hidravlično znižljiva ploščad • Razširljivo na 3 m širine • Opozorilne table • NATO vtikač za električno/hidravlično črpalko • Skupna dolžina: 16.000 mm • Lastna masa: 15.900 kg • Dovoljeno skupno maso: 48.000 kg (tehnično možno 48.000 kg) • Nosilnost: 32.100 kg • 4 x merilniki obremenitve osi • Dvojna pnevmatika: 235/75 R17,5 - Tehnični pregled in varnostni pregled: !! novo !! - Nemško vozilo! Pridržujemo si pravico do napak in vmesne prodaje!

Stanje: rabljeno, prevoženi kilometri: 278.066 km, Leto izdelave: 2009, Pogon: kolo Lastna teža: 72.000 kg Nwedpfx Asw D N Rajb Dol Dvižna kapaciteta: 150.000 kg Dimenzije tovornega prostora: 1620 x 285 x 395 cm Serijska številka: 068506 Stanje sprednjih pnevmatik: 80% Stanje zadnjih pnevmatik: 80% Za več informacij kontaktirajte PFEIFER GROUP.