Vrtalna naprava

HUETTE HBR202 TF - Elektro Bohrgerät

Stanje: novo, lastna masa: 22.700 kg, največja dovoljena obremenitev: 79.300 kg, skupna masa: 102.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 11.000 mm, širina tovornega prostora: 2.850 mm, višina nakladalnega prostora: 920 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, obratovalna teža: 22.700 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design to optimize load platform length, approx. 3,750 mm long, rear with chamfer approx. 850 mm x 10° - Hydraulically liftable and lowerable, stroke ± 250 mm including hydraulic connection linked to the hydraulic axle compensation of the first two axles - Open in the rear third - For tractor units: 6 x 4 and 8 x 4 Load platform: - Extendable load platform, approx. 11,000 mm long with rear chamfer approx. 500 mm x 10° - Recess in the platform and into the chamfer for receiving the excavator dipper stick, approx. 4,240 x 900 x 440 mm - Pneumatic locking with conical locking pin and reinforced locking positions, supply lines protected within the extendable beams, automatically adapting to the actual platform length Ramps: - One pair of two-piece steel ramps approx. 4,650 mm long and 900 mm wide - Hydraulically foldable ramp tips - Ramps individually hydraulically adjustable approx. 235 mm outward and approx. 215 mm inward - 25 mm "Super Grip" rubber flooring and approx. 5 mm checker plate as additional reinforcement on the chamfered section of the platform - Square climbing strips 20x30 mm, spaced approx. every 200 mm on the outer frame of the ramp Axles, Suspension, and Tires: - PA-X axle system, all axles hydro-mechanically forced steered - Steering performance of the first two axles can be optimally adjusted to the platform length, both mechanically and hydraulically - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pre-fitted locking pins for securing in raised position - 245/70 R 17.5 3PMSF Accessories included: - Plug-in steel front wall, approx. 400 mm high - Supply line connection strip for tractor unit, mounted at the height of the outer frame profile Ncsdpfxek Af Svs Aibor - 1 spare wheel - Outer beams of gooseneck with mounting holes for bolted lashing rings - First hole approx. 200 mm from front, then every approx. 400 mm - 2 pairs of screw-in lashing rings included - Chequer plate covering over the gooseneck - On gooseneck: 1 pair of removable anodized ALU side walls, approx. 400 mm high - On gooseneck: 1 removable anodized ALU rear wall, approx. 400 mm high - 3.5" king pin / 2" king pin mounted - Guide plate of the gooseneck for fifth wheel plate, approx. 500 mm wide - 4 chocks - 4 axle load gauges - Mechanical drop tube supports at the front - 1 one-piece INOX toolbox, approx. 2,480 x 340 x 390 mm - Mechanical drop tube supports at the front - Continuous steel deck with baked-in sand layer as anti-slip protection on the platform - 1 intermediate table, approx. 500 mm wide, for the extension, with slotted holes for insertable and relocatable bridging elements - Sand coating on support surfaces of the intermediate table - Mechanical locking for securing the intermediate table on the extension - 8 pairs of stake pockets in the outer frame - Extendable (galvanized) widenings, approx. 230 mm per side - 1 pair of hydraulic rear supports - Central lubrication system - 1 reversing spotlight each on left and right rear of the vehicle - 3 kW electro-hydraulic power unit - Loose widening planks in reinforced steel U-frame - Radio and cable remote control - 4 warning signs, approx. 423 x 423 mm

Stanje: novo, največja dovoljena obremenitev: 67.200 kg, skupna masa: 85.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment features. Full equipment details upon request. GOOSENECK * Gooseneck in SNT design for optimized loading platform length, approx. 3,700 mm long, with a rear chamfer approx. 1,000 mm x 10° * For tractor units: 6x2, 6x4, and short 8x4 * Plug-in steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for controlling hydraulic functions, excluding hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized finish * One plug-in ALU rearboard, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood flooring above the gooseneck, checker plate flooring above the king pin * 3.5 inch king pin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Round NATO socket on the front connection bar (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow control, incl. bracket for suspension of supply lines (Faymonville couplings) * 2 pairs of stake pockets sunk into the gooseneck, for plug-in stakes approx. 100 x 50 mm LOADING DECK * Extendable loading deck, length approx. 11,000 mm, rear chamfer approx. 500 mm x 10° * Pneumatic locking with conical locking bolt and reinforced lock positions, supply lines are routed protected in the extendable beams and automatically adjust to the respective platform length * BPW axles and suspension, 1st axle steerable, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Tyres: 235/75 R 17.5 3PMSF, twin tyres Ncedpfxsrgzv Ne Aibsr * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * Continuous 50 mm thick hardwood flooring on the loading deck, interrupted between the axles (increases coefficient of friction) * Slotted holes for attachable and re-positionable bridging elements: - on the fixed section behind the gooseneck - at the front of the loading area * 1 sliding intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate flooring, slotted holes front and rear for attachable and repositionable bridging elements * 1 pair of recessed horizontal lashing rings at the front of the fixed platform section (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the deck, fold-out to the outside (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering operated from both front and rear via cable remote control, with axle tracking control, no installation in the tractor unit * 1st axle with automatic lift-axle function and start-up aid according to EU Directive 2021/535 * Under the gooseneck and on the rear cross member, one 7-pin socket each on left and right, with bracket for warning signs * Painted sand coating on the outer frame of the platform as well as on the checker plates of the platform and in the transition area between the loading deck

Stanje: rabljeno, moč: 70 kW (95,17 KM), vrsta goriva: dizel, barva: rdeča, dvižna višina: 9.000 mm, velikost pnevmatike: 15.5 / 80 - 24, stanje pnevmatik: 98 odstotek, tip droga: teleskopski, Leto izdelave: 2009, obratovalne ure: 2.362 h, nosilnost: 3.200 kg, Oprema: hidravlika, kabina, pogon na vsa štiri kolesa, vilice za palete, Rough terrain telescopic forklift MANITOU, model: MT 932 D-E3 - 4x4x4, first use: 2010, LIFTING CAPACITY: 3,200 kg, LIFT HEIGHT: 9.00 m, LONG FORKS (fork length: 1,180 mm / fork carriage width: 1,120 mm) – LOAD GUARD, AUXILIARY HYDRAULICS, QUICK COUPLER, 4-cylinder PERKINS TURBO diesel engine (type: 2978/2200 – 95.20 HP / 70.00 kW at 2,200 rpm), ALL-WHEEL DRIVE and ALL-WHEEL STEERING (4x4x4) – CRAB STEERING, OVERLOAD WARNING SYSTEM, spacious cab (low overall height, only approx. 2,280 mm) – tinted windows, comfort seat, ROPS/FOPS, trailer hitch (with electrical connection), road lighting, CPB, WARNING BEACON, exterior mirrors (2x), windshield wipers (2x), heating/ventilation, lashing and transport lugs, OPERATION MANUAL (in German). Tyres: OFF-ROAD TYRES (15.5 / 80 – 24) – approx. 98% all around. Transport dimensions: Length: approx. 5,850 mm (approx. 4,600 mm without forks), width: approx. 2,280 mm, height: approx. 2,280 mm. Price is net for export, subject to VAT within the country. FINANCING AVAILABLE / COST-EFFECTIVE TRANSPORT (WORLDWIDE) / FOR EXPORT ONLY THE NET PRICE IS PAYABLE! © pb Ncjdpfxjuq Hyps Aibsr

Stanje: rabljeno, Leto izdelave: 2014, nosilnost: 5.000 kg, dvižna višina: 21.000 mm, vrsta goriva: dizel, gradbena višina: 3.050 mm, stanje pnevmatik: 50 odstotek, velikost sprednje pnevmatike: 18 R22.5, velikost zadnje pnevmatike: 18 R22.5, barva: drugo, Special equipment: 3rd valve, heating, full cabin. Special equipment description: Driver protection roof, 3rd control circuit, lighting, radio control, joystick. Ncedpfxei Rhtve Aibor

Stanje: novo, največja dovoljena obremenitev: 65.400 kg, skupna masa: 93.400 kg, konfiguracija osi: 3 osi, Leto izdelave: 2025, Pos. 1: Type STZ-VP 6 (245) (2+4) with pendulum axles The specified technical data apply only when using a 4-axle tractor unit with the following data: Dimension a: 5,400 mm Fifth wheel height (loaded): 1,300 mm Weights at speed 80 km/h Fifth wheel load: 22,000 kg Axle load: 6 x 12,000 kg Gross vehicle weight rating: 94,000 kg Curb weight: approx. 29,600 kg Payload: approx. 64,400 kg (depending on load diagram / easyLOAD calculation) Dimensions Dimension b: 18,765 mm Overall length of combination: 24,165 mm Vehicle width: — Gooseneck length x width: 3,700 mm x 2,480 mm Ncedpjwg N N Ijfx Aiber Fifth wheel height (loaded): 1,300 mm Articulation radius front/rear: 1,370 mm / 2,735 mm King pin: 3.5'' 2-axle front bogie Wheelbase: 1,510 mm Single tires: Continental, 245/70 R 17.5 143/141 L (146/146 F) M+S Steering axle arrangement: counter-steered Flatbed 14,400 mm (external beams), single telescopic with separating point Length x width: 7,000 mm x 2,750 mm Telescopic extension by / to max. 3,400 mm / 10,400 mm Deck height: 300 mm Plus 4,000 mm extension beam included Loaded loading height: approx. 450 mm 4-axle rear bogie Wheelbase: 3 x 1,510 mm Single tires: Continental, 245/70 R 17.5 143/141 L (146/146 F) M+S Steering axle arrangement: forced steering

Stanje: rabljeno, moč: 74,5 kW (101,29 KM), vrsta goriva: dizel, barva: rdeča, dvižna moč: 4 kg/m, dvižna višina: 14.000 mm, velikost pnevmatike: 15.5 / 80 - 24, stanje pnevmatik: 98 odstotek, tip droga: teleskopski, Leto izdelave: 2007, obratovalne ure: 1.048 h, Oprema: kabina, pogon na vsa štiri kolesa, vilice za palete, Rough terrain telescopic handler MANITOU, model: MT 1440 SLT ULTRA TURBO Series III-E2 - 4x4x4, first delivered: 2008, LIFTING CAPACITY: 4,000 kg, LIFTING HEIGHT: 14.00 m, LONG FORKS – QUICK COUPLER, AUXILIARY HYDRAULICS, LOAD PROTECTION GUARD, 4-cylinder PERKINS TURBO diesel engine (101.32 hp / 74.50 kW at 2,200 rpm), RADIO REMOTE CONTROL, FOUR-WHEEL DRIVE and FOUR-WHEEL STEERING (4x4x4) – CRAB STEERING, hydraulic outriggers (2x / WIDE DESIGN), SIDE SHIFT - LEVELLING, OVERLOAD PROTECTION DEVICE, spacious cab (coloured glass), comfort seat, ROPS / FOPS, road lighting, WORK LIGHTS (front/rear), WARNING BEACON, exterior mirrors (2x), windscreen wipers (2x), heating / ventilation, trailer coupling, lashing and transport points. Tyres: BKT OFF-ROAD TYRES (15.5/80 – 24) – approx. 98% all round. Transport dimensions: Length: approx. 7,290 mm (approx. 5,930 mm without forks), width: approx. 2,440 mm, height: approx. 2,560 mm. Price is net export; for domestic sales, VAT applies. Financing possible / low-cost worldwide transport / for export sales, only the net price is payable. Njdpfxjuiyqdj Aibjcr

Stanje: rabljeno, moč: 74,5 kW (101,29 KM), vrsta goriva: dizel, barva: rdeča, dvižna višina: 18.000 mm, velikost pnevmatike: 15.5 - 25, stanje pnevmatik: 98 odstotek, tip droga: teleskopski, Leto izdelave: 2011, obratovalne ure: 2.847 h, gradbena višina: 2.540 mm, dolžina vilic: 1.200 mm, širina nosilnega okvirja vilic: 1.200 mm, nosilnost: 4.000 kg, Oprema: kabina, pogon na vsa štiri kolesa, vilice za palete, Rough terrain telescopic handler MANITOU, model: MT 1840 EP PRIVILEGE TURBO - 4x4x4, year of first use: 2012. Lifting capacity: 4,000 kg, maximum lifting height: 18.00 m. Equipped with radio remote control, emergency lowering system, long forks (fork length: 1,200 mm / fork carriage width: 1,200 mm), auxiliary hydraulics with hydraulic quick coupler and hydraulic side-shift. Includes load protection guard. Powered by a 4-cylinder PERKINS diesel engine (101.32 HP / 74.50 kW at 2,200 rpm), CPB, permanent four-wheel drive and all-wheel steering (4x4x4) including crab steering mode. Features hydraulic stabilizers (2x), chassis leveling system, overload warning system, spacious panoramic cab with tinted glass, ROPS/FOPS, comfort seat from GRAMMER, tow hitch, front and rear work lights, road lighting, warning beacon, reverse alarm, three windshield wipers, dual external mirrors, heating/ventilation system, and German-language operator’s manual. Fitted with BKT off-road tyres (size 15.5 – 25) with approximately 98% tread remaining. Transport dimensions: length: approx. 7,420 mm (approx. 6,100 mm without forks), width: approx. 2,400 mm, height: approx. 2,540 mm. Financing available / cost-effective worldwide transportation / for export, only the net price is payable (!). Ncsdpfx Aouiwv Reiber

Stanje: rabljeno, Leto izdelave: 2018, obratovalne ure: 907 h, dvižna višina: 18.000 mm, vrsta goriva: dizel, tip droga: teleskopski, gradbena višina: 2.540 mm, moč: 55,4 kW (75,32 KM), širina nosilnega okvirja vilic: 1.100 mm, dolžina vilic: 1.200 mm, stanje pnevmatik: 98 odstotek, skupna dolžina: 7.420 mm, barva: rdeča, dvižna moč: 4 kg/m, gorivo: dizel, Oprema: kabina, osvetlitev, pogon na vsa štiri kolesa, spojka prikolice, vilice za palete, Rough terrain telescopic handler MANITOU, model: MT 1840 ST3B TURBO – 4x4x4, year of first use: 2019, LIFT CAPACITY: 4,000 kg, LIFT HEIGHT: 18.00 m. Long forks (fork length: 1,200 mm / fork carriage width: 1,100 mm), auxiliary hydraulics, load protection grid, quick coupler, 4-cylinder DEUTZ turbo diesel engine (type: TD 3.6 L4 – 75.34 hp / 55.40 kW at 2,200 rpm). With cab protection frame (ROPS/FOPS), comfort seat, tow hitch, road lights, two windscreen wipers, two exterior mirrors, audible alarm/warning beacon, heating/ventilation, operator manual (German). Four-wheel drive and all-wheel steering (4x4x4) including crab steering mode, two hydraulic outriggers, side-tilt adjustment, overload warning system, panoramic cab with tinted glass, BKT off-road tires (15.5/80-24) with approx. 98% tread remaining. Transport dimensions: length approx. 7,420 mm (approx. 6,100 mm without forks), width approx. 2,400 mm, height approx. 2,540 mm. Financing available / Competitive worldwide shipping / For export, only net price payable Ncsdpfx Aisr Nvykebsr

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, dolžina tovornega prostora: 14.600 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 880 mm, skupna dolžina: 14.600 mm, skupna širina: 2.550 mm, skupna višina: 880 mm, vzmetenje: zrak, velikost pnevmatike: 245 / 70 R17.5, barva: modra, Leto izdelave: 2008, Oprema: dvižna zadnja plošča, Color: Blue Loading capacity: 72,600 kg Deck height: 885 mm Extendable Braked Main Features Manufacturer: Goldhofer Type: STZ L6 65/80A Semi Low Loader with ramps Chassis Number: WG0STZL6A80030419 Year of manufacture: 2008 Weights/Loading Capacity King-pin load: 26,000 kg Axle load per axle: 11,200 kg Total axle load: 6 x 11,200 kg = 67,200 kg Gross Vehicle Weight (GVW): 93,200 kg Unladen weight: 20,600 kg Payload: 72,600 kg Axles Axle brand: BPW Air suspension 1st axle fixed Axles 2–6 hydraulically steered Axles 1 & 2 liftable High/low valve WABCO braking system Tyres: 245 / 70 R17.5 Dimensions Length: 14,600 mm Extensible by: +7,200 mm Max extended length: 21,800 mm Load floor width: 2,550 mm Platform height: approx. 885–925 mm King-pin height: +/- 1,350 mm Additional Information • PTO-operated (Truck) • Lashing rings • Stake pockets • Partially wooden floor • Mechanical landing gear • Hydraulic ramps • Extendable loading platform • Rear bumper with lights • 3.5" king-pin • Central lubrication system • Oversize load marker boards • Radio remote control • Outriggers • Toolbox on gooseneck = More Information = General Information Year of manufacture: 2008 Ncjdpfxsx R Undo Aibor Axle configuration Tyre size: 245 / 70 R17.5 Axle brand: BPW Eco Suspension: Air suspension Rear axle 1: Twin tires; lift axle; max. axle load: 11,200 kg Rear axle 2: Twin tires; lift axle; max. axle load: 11,200 kg; steered Rear axle 3: Twin tires; max. axle load: 11,200 kg; steered Rear axle 4: Twin tires; max. axle load: 11,200 kg; steered Rear axle 5: Twin tires; max. axle load: 11,200 kg; steered Rear axle 6: Twin tires; max. axle load: 11,200 kg; steered Weights Unladen weight: 20,600 kg Payload: 72,600 kg GVW: 93,200 kg Functional Superstructure brand: WABCO Deck height: 88 cm Extendable superstructure: Yes Condition Technical condition: very good Visual condition: very good Financial information Price: On request Further information For more information, please contact Stefan Schaapveld.

Stanje: zelo dobro (rabljeno), prva registracija: 08/2008, barva: zelen, Leto izdelave: 2008, Izvlečna nadgradnja: da Tehnično stanje: zelo dobro Optično stanje: zelo dobro Nsdpjykz Uisfx Aibocr