Nizki nakladalnik

Nükte Trailer NEW! Ramps Lift Axle

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 01/2026, dolžina tovornega prostora: 12.950 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 980 mm, skupna dolžina: 13.550 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70R17.5, barva: siv, Leto izdelave: 2026, Datum izdelave: Dimenzija pnevmatik: 245/70R17.5 Znamka osi: TRAX Vzmetenje: Zračno vzmetenje Os 1: Dvižna os Os 4: Krmiljena Emisijski razred: Euro 1 Registrska številka: 70310275 = Podatki o podjetju = Želite več informacij o tem vozilu? Priporočamo, da preverite BAS World. Tam boste našli: • HD inšpekcijski video • 360-stopinjske slike Isdoyftagepfx Ab Hjap • Popolne in preverjene specifikacije • Izračun stroškov in časa dostave • Podporo in storitve podjetja BAS World Želite izvedeti več? Obiščite BAS World na spletu!

Stanje: rabljeno, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2017, * SAF osi * Kolesni jaški * Hidravlične nakladalne rampe nastavljive po širini * Zračno vzmetenje * Razširljiv * Lastna teža: 11.020 kg Iaodpfxowta Ale Ab Hsp -----Interna številka vozila: 11010----Pridržujemo si pravico do napak in vmesne prodaje. WhatsApp podpora na voljo! Za vprašanja o vozilu ali dodatne informacije nam pišite preko WhatsAppa. WhatsApp nemščina, angleščina -- WhatsApp nemščina, angleščina, arabščina

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle is self-steering with electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering system and Ride-on-Road (RtR) valve ----Electrical / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on the trailer as an information tool, with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon at the rear left ----General Attachments: * Lateral underrun protection * Landing legs at the front and mechanical swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder underneath the chassis, right side ----Low Loader Platform: * Fifth wheel platform with 45° chamfered front corners and front toolbox made from galvanized sheet steel, B = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm high aluminum side walls (RAL 9010 pure white) on the fifth wheel platform, foldable and removable * Rear end wall -150 mm- inserted high * Rear slope on the fifth wheel platform to the low bed, approx. 700 mm long * Fifth wheel platform with 50 mm wooden planks and low loader deck with 60 mm wooden planks * Checker plate over the axles ----Extensions: * 8 x mechanical folding extensions to a total width of 3 m, not on the rear slope (extension planks available and stowed on the fifth wheel platform) * Mechanically adjustable warning sign packages front and rear ----Load Securing (Lashing Package): * On the fifth wheel platform: 2 x 6.3 t lashing rings per side, and 3 x 5 t lashing bars on the outer frame * On the low-bed platform: 2 x 13.4 t lashing rings per side, plus 4 x 10 t swivel-mounted and retractable lashing rings recessed in the outer frame * 2 x 6.4 t lashing eyes per side, and 1 lashing ring at the rear in the excavator stick recess * 2 x container locks immediately after the gooseneck on the low-bed platform ----Excavator Stick Recess: * Excavator stick recess from the end of the last rigid axle, over the steering axle, to the end cross member, continuous with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm Iedpfx Absl Tnvgs Hoap ----Access Ramps: * Mechanically single-piece, fully hot-dip galvanized hydraulic ramps approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for future customer-side retrofitting of hydraulically movable ramps * The outer board of the access ramp is made of 50 mm hardwood * Climbing bars on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for truck hydraulic pump flows from 40 l to 120 l/min) ----Loading Dimensions: * Fifth wheel platform loading area: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm slope) ----Coupling Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractors) ----Paintwork: * Chassis, access ramps, rear folding supports, extension consoles hot-dip galvanized * Axles, landing legs, air tanks painted in black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images may show equipment not included in the offered vehicle ----Delivery Time: * Available from c

Stanje: novo, največja dovoljena obremenitev: 38.000 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 12.180 mm, širina tovornega prostora: 3.000 mm, višina nakladalnega prostora: 890 mm, vzmetenje: zrak, Oprema: ABS, HUMBAUR 3-axle low-loader trailer with recessed loading bed, Type HTS30K-V44+ --- INCLUDES lift axle INCLUDES self-steering trailing axle with SAF air suspension INCLUDES 3-metre extension package INCLUDES storage box under loading area INCLUDES TIM/WABCO SmartBoard for axle load display INCLUDES hot-dip galvanized chassis INCLUDES aluminium sideboards and storage box for gooseneck platform INCLUDES stake pockets and lashing package INCLUDES excavator trough Equipment: V44+ * Perm. gross weight 48,000 kg * Payload approx. 38,000 kg * Chassis frame and ramps hot-dip galvanized in immersion bath * SAF air suspension aggregate including lifting and lowering * INCLUDES hot-dip galvanized chassis * Lift axle with start-up aid and trailing self-steering axle * EBS electronic braking system * WABCO SmartBoard for axle load display * LED lighting system * Loading height approx. 890 mm * Fifth wheel height: approx. 1,230 mm * Tyres 235/75R17.5 – 12 units * Lowbed length approx. 8,680 mm including ramped section * Gooseneck platform length approx. 3,500 mm including ramped section * Excavator trough * 2" king pin adjustable by 340 mm for 2+3 axle tractor units * Gooseneck with 400 mm front wall * 400 mm aluminium sideboard, side-foldable + lockable storage box with lid * Ramp rail at recess towards gooseneck Iaodpfx Abjkn N S Uo Hjp * 3 pairs of 6-tonne recessed lashing rings in raised bed * 3 pairs of 3-tonne lashing points in outer frame of raised bed * 5 pairs of 10-tonne recessed lashing rings in lowbed * 3 pairs of 6-tonne lashing eyes bolted to outer frame * 3 pairs of stake pockets in outer frame of raised bed * 5 pairs of stake pockets in outer frame of lowbed * 3-metre widening package with fold-out outriggers, wooden planks * Steel sheet tool box under loading area, lockable, designed as a storage compartment for wooden planks mounted laterally under loading area * Warning package with lighting * Rotating beacon at the rear * One-piece ramps approx. 3,150 x 750 mm – approach angle approx. 10° * Softwood covering on ramps, lowbed & gooseneck platform * Spring lifting mechanism for the ramps * COC documents * 48,000 kg gross vehicle weight only with special permit under §70 * Climbing strips on ramp incline * Brake connection: red/yellow * Electrics: triple socket with 2x 7-pin sockets (1 x ISO 1185 / 1x ISO 3731, 24 V-N/24 V-S) and 15-pin socket ISO 12098 --- Sample photos – Equipment may vary! *Stock vehicle – available immediately *Subject to prior sale *Ex works price

Stanje: rabljeno, največja dovoljena obremenitev: 37.800 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2023, Vehicle description with air suspension, 2-piece ramps, and trailing axle STN-L Gooseneck - 45-degree beveled design - Load platform dimensions: 3,800 x 2,480 mm - Fifth wheel plate with replaceable 2" king pin (fifth wheel pin 50) - Mechanical landing legs - Pivoting radius: 2,500 mm - Tapered transition: 900 mm Chassis Iaodpfxjxwhi Sj Ab Hop - 3-axle air-suspended running gear, wheelbase 1,310 mm - SAF axles, consisting of two fixed axles and two friction-steered steering-knuckle axles - Axles with adjustable tapered roller bearings and automatic slack adjusters (AGS) - Lift and lower valve Rear section - Rear bevel: 1,000 mm Brake system - Dual-line full pneumatic braking system with diaphragm brake cylinders - Automatic load-dependent brake (ALB) - Automatic slack adjusters (AGS) - Parking brake with spring-loaded cylinders - ABS brake system - 2-piece loading ramps (2,950 + 1,700 x 700 mm) incl. hydraulic lifting system - Foldable rear supports - Hydraulic ramp adjustment - Power pack - Extendable widenings including drop-in planks in the platform area to widen the platform to 3,000 mm Technical data Gooseneck Platform (LxW): 3,880 x 2,480 mm Loaded fifth wheel height: 1,250 mm Platform Platform (LxW): 9,300 x 2,550 mm Loaded platform height approx. 860 mm (+145/-55 mm) Steering 1st + 2nd axle: non-steered 3rd axle: trailing steered Power pack

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring actuators * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle self-steering with electro-pneumatic steering lock ----Suspension: * Air suspension with lift and lower system plus RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control unit mounted on the trailer as an infotool with pressure sensors to display total axle load * 15-pin power connector * LED lighting system 12/24V * Removable LED beacon at the rear left ----General fittings: * Side underrun protection * Landing gears at the front and mechanical swiveling supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder mounted on the right side under the chassis ----Low-loader platform: * Saddle platform with 45° chamfered front corners and front tool box made of galvanized sheet steel (W = 2,480 x H = 500 x L = 665 mm) with folding lid * 400 mm high, foldable and removable aluminum side boards (RAL 9010 pure white) on the saddle platform * Rear wall -150 mm- plugged in at the back * Rear slope on the saddle platform to the low-bed approx. 700 mm long * Saddle platform with 50 mm wooden planks and low-bed platform with 60 mm wooden planks * Tread plate above the axles Iedpopk D I Ajfx Ab Hoap ----Extensions: * 8 x mechanical folding extensions up to 3 m overall width, but not in the rear slope (extension planks available with storage on the saddle platform) * Mechanically adjustable warning sign packages at the front and rear ----Load securing (Lashing package): * On the saddle platform, 2 x 6.3 t lashing points each as well as 3 x 5 t lashing bars on each side of the outer frame * On the low-bed platform, 2 x 13.4 t lashing rings on each side as well as 4 x 10 t lashing rings, pivoting and retractable, integrated in the outer frame * 2 x 6.4 t lashing eyes on each side as well as 1 lashing point in the excavator stick recess at the rear * 2 x container locks directly after the gooseneck on the low-bed platform ----Excavator stick recess: * Excavator stick recess from the end of the last rigid axle via the steering axle to the rear cross member, continuous with internal reinforcement profile approx. L = 2,450 x W = 770 mm x D = 270 mm ----Drive-on ramps: * Mechanical one-piece hot-dip galvanized hydraulic drive-on ramps approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for future customer-side retrofit of hydraulic ramp adjustment * The outer slat of the drive-on ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the drive-up slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck between 40 and 120 l/min) ----Loading dimensions: * Loading area saddle platform: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Loading height unladen approx. 910 mm (incl. 860 mm drive-on slope) ----Fifth wheel height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractors) ----Paintwork: * Chassis, drive-on ramps, rear folding supports, extension brackets hot-dip galvanized * Axles, landing gears, air tanks painted in a black tone * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer warranty * Subject to errors and prior sale * Sample images may include equipment not matching the offered vehicle ----Delivery time: * Available