Polpriklopnik za prevoz avtomobilov

FAYMONVILLE Multimax

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 20.000 kg, največja dovoljena obremenitev: 120.000 kg, konfiguracija osi: 3 osi, stanje pnevmatik: 70 odstotek, barva: rdeča, Leto izdelave: 2006, 3 dvižne in krmilne osi. Iedpfx Adoyaaz Heheal Hidravlično vzmetenje. Višinsko nastavljiv vrat. Pomožni bencinski motor Hartz. Neodvisno brezžično krmiljenje. Hidravlične zadnje rampe za strojno obremenitev do 70 ton.

Stanje: rabljeno, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2017, * SAF osi * Kolesni jaški * Hidravlične nakladalne rampe nastavljive po širini * Zračno vzmetenje * Razširljiv * Lastna teža: 11.020 kg -----Interna številka vozila: 11010----Pridržujemo si pravico do napak in vmesne prodaje. WhatsApp podpora na voljo! Za vprašanja o vozilu ali dodatne informacije nam pišite preko WhatsAppa. Ijdpfx Ajwta Aledhsal WhatsApp nemščina, angleščina -- WhatsApp nemščina, angleščina, arabščina

Stanje: rabljeno, največja dovoljena obremenitev: 59.740 kg, skupna masa: 73.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2008, skupna širina: 2.750 mm, Leto izdelave: 2008, Oprema: ABS, Nizkopodna prikolica Faymonville Multimax STN-4AU 4 osi, prva os dvignljiva, 3. in 4. os vodljivi 3 m teleskopsko izvlečljiva Širina 2,75 m, razširljiva na 3,20 m Lastna teža: 13.260 kg Obremenitev na sedlo: 25.000 kg Nosilnost: 59.740 kg Hidravlične rampe Iajdpfsx Sb Dzox Adhjl

Stanje: rabljeno, največja dovoljena obremenitev: 40.800 kg, skupna masa: 53.800 kg, konfiguracija osi: 3 osi, prva registracija: 11/2012, naslednji pregled (TÜV): 11/2025, Oprema: ABS, Faymonville 4-osovinski Multimax STN-4AX niskopodni teleskopski poluprikolica Godina proizvodnje: 11.2012 Tara: 13.000 kg Dozvoljena ukupna masa: 53.800 kg Tehnički dozvoljena masa: 55.400 kg Nosivost: 40.800 kg Podpritisna sila: 25.000 kg Dimenzije guma: 205.65R17,5 3. i 4. osovina – prinudno upravljane 4x SAF osovine 7.600 kg sa vazdušnim ogibljenjem Dužina: 13.475 mm do 20.275 mm (izvlačiva) Širina: 2540 mm do 2620 mm Visina: 1200 mm ! Dodatne informacije na zahtev putem e-maila ! Podaci su informativni i bez garancije na tačnost! Iodpju Aynlsfx Adheal Informacije dostupne na internetu su neobavezujući opisi i ne predstavljaju zagarantovane karakteristike. Prodavac ne odgovara za greške, tipografske greške ili greške u prenosu podataka. Zadržavamo pravo na izmene. Stalan otkup i prodaja, kao i zamena i iznajmljivanje dizalica i podiznih vozila, kao i građevinskih i teških vozila.

Stanje: novo, skupna masa: 80.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, Other vehicles available under . Summary of features. Complete specification on request. NECK/SCHWANENHALS Iasdpfx Asxarmaodhsl Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, rear tapers approx. 1,000 mm x 10°. For tractor units: 4 x 2, 6 x 2 and 6 x 4. - Front wall made of steel, plug-in, approx. 400 mm high - ASPÖCK-UNIBOX on the front connector strip with 24N, 24S & 15-pin sockets - 3 kW electro-hydraulic unit for controlling hydraulic functions, except for hydraulic winches - Outer side members of the gooseneck with mounting holes for bolted lashing rings. First hole approx. 200 mm from the front, then approx. every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) - 1 pair of horizontal lashing rings in the rear area of the gooseneck (LC 10,000 daN) - 1 pair of plug-in side aluminum side walls on the gooseneck, approx. 400 mm high, anodized - 1 plug-in aluminum rear wall on the gooseneck, approx. 400 mm high, anodized - Gooseneck surface with approx. 40 mm hardwood flooring, over king pin with checker plate - 3.5 inch king pin - Gooseneck guidance plate for fifth wheel plate, approx. 500 mm wide - Round NATO socket on the front connector strip (Maeler & Kaege VG 96 917) - 2 pairs of lashing rings with retaining springs, suspended on the outside of the gooseneck (LC 5,000 daN) LOADING PLATFORM Loading platform in extendable version, approx. 8,800 mm in length with rear taper approx. 500 mm x 10°. Pneumatic locking with conical locking pin and reinforced locking positions; supply lines run protected inside the extendable beams and automatically adjust to the platform length. - BPW axles and suspension, 1st axle steering, all other axles hydro-mechanical forced steering. 1st axle with electromagnetic reverse lock via reverse gear and manual activation. Technical axle load: 12,000 kg each - Air suspension with lift/lower valve - 235/75 R 17.5 3PMSF twin tyres - brand of our choice - Mechanical landing legs with 2-speed gearbox and crank handle, JOST Modul B - static test load = 50,000 kg - Continuous and between axles interrupted approx. 50 mm thick hardwood flooring (increases coefficient of friction) - Long holes for attachable and repositionable bridging elements: - at the front of the loading platform - 1 movable intermediate table, approx. 300 mm wide, for the extension tube with large cross-section, with checker plate covering. - At front and rear with long holes for attachable and repositionable bridging elements - 1 pair of lashing rings on the front cross member (LC 10,000 daN) - 7 pairs of recessed lashing rings in the outer frame of the platform, foldable outwards (LC 10,000 daN) - Galvanized, extendable widenings of approx. 230 mm per side (without wooden planks) - 1 pair of mechanical rear supports - Remote steering from the front and rear via cable remote control, with tracking control for the axles, no installation required in tractor unit - TPMS tire pressure monitoring sensors installed in all wheels - Securing of the platform with conically welded locking profiles every 500 mm - Lock monitoring left and right on the trailer - For the intermediate table, approx. 300 mm wide, a mechanical lock for securing the intermediate table on the sliding extension - 5 pairs of threaded blocks on the extendable beam for mounting bolted rings M20 (LC 5,000 daN) BRAKE SYSTEM Brake system

Stanje: novo, največja dovoljena obremenitev: 36.410 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available for immediate or short-term delivery, on our website. Extract from the specification. Complete specification available on request. Gooseneck * Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long * Rear with chamfer approx. 1,000 mm x 10°. For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Plug-in steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX on the front connection rail with sockets Iaedpjxc Axrofx Adhel * 3 kW electro-hydraulic power unit for hydraulic operations (except hydraulic winches) * External beams of the gooseneck with mounting holes for screwable lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings at the rear of the gooseneck (LC 10,000 daN) * Approx. 40 mm thick hardwood covering over the gooseneck * 2-inch kingpin * Gooseneck guide plate for the fifth wheel, approx. 500 mm wide * Round NATO socket on front connection rail (Maeler & Kaege VG 96 917) * 1 pair of stake pockets recessed in the gooseneck for insertable stakes approx. 100 x 50 mm (inside the chassis beam) Loading Platform * Extendable loading platform, approx. 8,800 mm long with rear chamfer approx. 500 mm x 10° * Recess in the loading platform and in the chamfer for excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Continuous 50 mm thick hardwood covering on the loading platform (interrupted between axles) * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Platform locking with conically welded locking profiles every approx. 250 mm * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 9 pairs of recessed, outward-folding lashing rings in the outer frame (LC 10,000 daN) * 1 pair of permanently integrated wheel recesses in front of the axles, open up to the cross member of the gooseneck, approx. 700 x 410 mm (W x D) * 1 pair of permanently integrated wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), located between the 1st and 2nd axle * Aluminium covers for the wheel recesses in front of the axles and between the 1st and 2nd axle, usable as widening planks * Hardwood covering on the loading platform chamfer * Painted sand coating on the outer frame and chequer plates of the loading platform Chassis * BPW axles and suspension * 1st and 2nd axle rigid * 3rd axle self-steering * 3rd axle with electro-magnetic reverse lock via reverse gear and manual activation * Air suspension with lift and lower valve * 1st axle with traction aid * 2 axle load gauges mounted on the left side, including axle load diagram Tyres * 235/75 R 17.5 3PMSF twin tyres * TPMS tyre pressure monitoring system compliant with ECE R 141 Paintwork * 1 LED work light mounted left and right ahead of axles, wired to the tractor unit Loading Ramps * Hydraulic loading ramps DR-15/60-900-4350-HB-HV-M. Pair of two-part steel ramps, approx. 4,350 mm length, 900 mm width * Hardwood covering * Hydraulically foldable ramp tips * Ramps individually hydraulically adjustable approx. 235 mm outward and 215 mm inward * Hardwood covering on platform chamfer * Ramp with hardwood covering Brake System WABCO EBS-E according to EU regulations Lighting System * 24-volt lighting system * ASPÖCK-NORDIK full L

Stanje: rabljeno, največja dovoljena obremenitev: 57.900 kg, skupna masa: 73.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2024, naslednji pregled (TÜV): 07/2026, skupna širina: 2.540 mm, Oprema: ABS, Our complete inventory of vehicles, including models available for immediate or short-term delivery, is available on our website. Excerpt from the equipment list. Full equipment details available upon request. Gooseneck: * Gooseneck in SNT design for optimized loading area length, approx. 3,700 mm long * Gooseneck tapered at the rear, approx. 1,000 mm x 10° * Technical fifth wheel load: 30,000 kg; suitable for tractor units: 4x2, 6x2, and 6x4 Loading Area: * Extendable loading area, approx. 8,800 mm long, with rear tapering approx. 500 mm x 10° Axles and Suspension: * BPW axles and suspension * 1st axle with hydraulic steering and electro-magnetic reverse lock, all other axles hydro-mechanically forced-steered * Technical axle load: 12,000 kg per axle * Air suspension with lift and lower valve Tyres: * 235/75 R 17.5 3PMSF twin tyres, load index 143/141J (144/144F) Braking System: * WABCO EBS-E braking system compliant with EU regulations Paintwork: * Trailer colour: RAL 3002 Carmine Red Included Accessories: * Plug-in steel front wall, approx. 400 mm high * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 3 kW electro-hydraulic power unit for hydraulic functions (excluding hydraulic winches), without installation of supply connections to the tractor unit * Parking position for warning signs on the gooseneck when not in use * 1 mounting adapter for E-wheel in front of the gooseneck bulkhead (without E-wheel) * External carrier on the gooseneck with fixing bores for bolted lashing rings. First bore approx. 200 mm from the front, then every approx. 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of removable ALU side walls on the gooseneck, approx. 400 mm high, anodized finish * 1 removable ALU rear wall on the gooseneck, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood floor on the gooseneck, chequered plate above the king pin * 2 inch king pin * Mechanical landing legs with 2-speed gearbox and JOST Modul B crank * Continuous approx. 50 mm thick hardwood floor on loading area and interrupted between the axles * Securing of the loading area with conically welded locking profiles approx. every 500 mm * Long holes for detachable and repositionable bridging elements: - at the front of the loading area * 1 movable intermediate table, approx. 300 mm wide, for the draw-out tube with large cross-section, with chequered plate surface; at front and rear with long holes for attachable and repositionable bridging elements * 1 pair of lashing rings on the front cross-member (LC 10,000 daN) * 7 pairs of recessed lashing rings in the outer frame of the loading area, foldable outwards (LC 10,000 daN) * Extendable (galvanized) widening elements, approx. 230 mm per side (without timber planks) * 1 pair of mechanical rear supports * Remote steering from front and rear using cable remote control with push-button operation; single-track alignment of axles, without installation in the tractor unit * Cable (approx. 35 mm², approx. 3.5 m long) for supplying the electro-hydraulic unit and/or electric winch between trailer and tractor unit with plug (NATO-NATO) * 2 additional pairs of bolted lashing rings (LC 5,000 daN) * 1 single-piece INOX toolbox, approx. 2,480 x 340 x 390 mm (L x W x H), straight design, with two side exterior doors and one top lid, located behind the front wall. Ijdpfjxuyprsx Adhsal

Stanje: rabljeno, največja dovoljena obremenitev: 51.870 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2025, naslednji pregled (TÜV): 03/2026, skupna širina: 2.540 mm, Oprema: ABS, Our complete stock of vehicles, including those available immediately and at short notice, can be found on our website. Extract from the equipment. Full equipment details available upon request. GOOSENECK - Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, rear with 1,000 mm x 10° bevel - Suitable for tractor units: 4x2, 6x2, and 6x4 - Removable steel front wall, approx. 400 mm high - Yellow-red air couplings on the front connector strip Isdpfx Adoxtc Uhoheal - ASPÖCK UNIBOX on the front connector strip with 24N, 24S, & 15-pin sockets - 3 kW electro-hydraulic unit for hydraulic control - Outer beams of the gooseneck with mounting holes for bolt-on lashing rings - One mounting hole at the upper rear of the gooseneck outer beams for a bolt-on lashing ring - 1 pair of screw-in lashing rings included (LC 10,000 daN) - On the gooseneck, 1 pair of plug-in aluminum sideboards, approx. 400 mm high, anodized finish - On the gooseneck, one plug-in aluminum rear board, approx. 400 mm high, anodized finish - Approx. 40 mm thick hardwood flooring above the gooseneck - 2-inch kingpin - Gooseneck guide plate for fifth wheel, approx. 500 mm wide - Rear mount on gooseneck for aluminum drive-on ramps - Round NATO socket at the front connector strip (Maeler & Kaege VG 96 917) LOADING PLATFORM - Extendable loading platform, approx. 8,800 mm long, rear with 500 mm x 10° bevel - Recess in the loading platform and the bevel to accommodate excavator dipper arm, approx. 2,490 x 750 x 210/290 mm (L x W x H) - TPMS tire pressure monitoring system according to ECE R 141 - BPW axles and suspension - 1st and 2nd axles fixed, 3rd and 4th axles steering trailing axles - 3rd and 4th axles with electro-magnetic reverse lock, activating via reverse gear and manually - Technical axle load: 12,000 kg each - Air suspension with raising/lowering valve - 235/75 R 17.5 3PMSF twin tires - Mechanical landing legs with 2-speed gearbox and crank, JOST Module B – static test load: approx. 50,000 kg - Continuous and inter-axle interrupted approx. 50 mm thick hardwood flooring on the loading platform (increased friction coefficient) - Loading platform locking using conically welded locking profiles every approx. 250 mm - Slotted holes for attachable and repositionable bridging elements at the front of the platform - Intermediate platform with offset surface, approx. 300 mm wide, for the large cross-section sliding tube with sheet covering – front and rear with slotted holes for attachable and repositionable bridging elements – removable panel flush with the loading platform - 1 pair of lashing rings on the front cross member (LC 10,000 daN) - 6 pairs of recessed lashing rings in the outer frame, foldable outwards (LC 10,000 daN) - Additionally, 1 pair of external lashing rings on the front cross member, rotated approx. 90° inwards to the platform (LC 10,000 daN) - Extendable (galvanized) extensions, approx. 230 mm per side - 1 pair of fixed wheel recesses open up to the extension, approx. 700 x 410 mm (W x D), in the platform before the 1st axle, wheel recesses with sheet covering and square climbing strips of approx. 15 x 15 mm, each approx. 200 mm - Between 2nd and 3rd axles in the platform, 1 pair of fixed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D); covers for wheel recesses split lengthwise, with wood overlay, external plug-in mounting

Stanje: novo, največja dovoljena obremenitev: 50.400 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment specification. Full specification available on request. GOOSENECK * Gooseneck in SNT design to optimize platform length, approx. length 3,700 mm, with rear bevel of approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection rail with sockets * 3 kW electro-hydraulic unit for controlling hydraulic operations, except for hydraulic winches * 1 pair of detachable ALU side walls, approx. 400 mm high, anodized finish * 1 detachable ALU rear wall, approx. 400 mm high, anodized finish * Over the gooseneck, approx. 40 mm thick hardwood flooring, over the king pin with checker plate covering * 2-inch king pin * Mount at the rear of the gooseneck for ALU drive-on ramps * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) LOAD PLATFORM * Extendable load platform, approx. length 8,800 mm, with rear bevel approx. 500 mm x 10° * Recess in platform and rear bevel for accommodating an excavator dipper stick, approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, 1st axle self-steering, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reversing lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * Tires: 235/75 R 17.5 3PMSF twin tires * Mechanical landing legs with 2-speed gearbox and crank, JOST Modul B - static test load = approx. 50,000 kg * Platform with continuous and between-axles interrupted 50 mm thick hardwood flooring (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Extendable galvanized side extensions by approx. 230 mm each side (without wooden planks) * Wheel wells with square climbing strips, approx. 15 x 15 mm in front of the axles, continuous opening up to the cross member of the gooseneck, approx. 700 x 410 mm (W x D) * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks * Lockable aluminium elements on the extension tubes of the side extensions * Widenable U-profiles for inserting ALU covers: - on the fixed section behind the gooseneck - on the intermediate table - on the extendable platform * Wheel wells with square climbing strips, approx. 15 x 15 mm between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks * Lockable aluminium elements on the extension tubes of the side extensions * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with single-track monitoring of the axles, without installation in the tractor unit Iodpfxotx Nwnj Adhsal HYDRAULIC LOADING RAMPS * One pair of two-part steel ramps, type: DR-15/60-900-4350-KG-HV-M, approx. length 4,350 mm and width approx. 900 mm * Hydraulically folding ramp tips * Ramps hydraulically adjustable individually by approx. 235 mm outward and approx. 215 mm inward * Super Grip rubber surface approx. 25 mm and steel surface approx. 5 mm as additional

Stanje: novo, največja dovoljena obremenitev: 67.200 kg, skupna masa: 85.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment features. Full equipment details upon request. GOOSENECK * Gooseneck in SNT design for optimized loading platform length, approx. 3,700 mm long, with a rear chamfer approx. 1,000 mm x 10° * For tractor units: 6x2, 6x4, and short 8x4 * Plug-in steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for controlling hydraulic functions, excluding hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized finish * One plug-in ALU rearboard, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood flooring above the gooseneck, checker plate flooring above the king pin * 3.5 inch king pin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Round NATO socket on the front connection bar (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow control, incl. bracket for suspension of supply lines (Faymonville couplings) * 2 pairs of stake pockets sunk into the gooseneck, for plug-in stakes approx. 100 x 50 mm LOADING DECK * Extendable loading deck, length approx. 11,000 mm, rear chamfer approx. 500 mm x 10° * Pneumatic locking with conical locking bolt and reinforced lock positions, supply lines are routed protected in the extendable beams and automatically adjust to the respective platform length * BPW axles and suspension, 1st axle steerable, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Tyres: 235/75 R 17.5 3PMSF, twin tyres * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg Iedsrgzv Nspfx Adheal * Continuous 50 mm thick hardwood flooring on the loading deck, interrupted between the axles (increases coefficient of friction) * Slotted holes for attachable and re-positionable bridging elements: - on the fixed section behind the gooseneck - at the front of the loading area * 1 sliding intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate flooring, slotted holes front and rear for attachable and repositionable bridging elements * 1 pair of recessed horizontal lashing rings at the front of the fixed platform section (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the deck, fold-out to the outside (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering operated from both front and rear via cable remote control, with axle tracking control, no installation in the tractor unit * 1st axle with automatic lift-axle function and start-up aid according to EU Directive 2021/535 * Under the gooseneck and on the rear cross member, one 7-pin socket each on left and right, with bracket for warning signs * Painted sand coating on the outer frame of the platform as well as on the checker plates of the platform and in the transition area between the loading deck