Polpriklopnik z nizko nakladalno ploščadjo

DOLL 2- Achs Tiefbett Tera mit überfahrbarem Heck

Stanje: novo, lastna masa: 11.000 kg, največja dovoljena obremenitev: 38.500 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm hardwood flooring Load Area: - Extendable loading area with rear taper approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm - Wheel recesses fitted with square climbing strips 15 x 15 mm, including lower extensions - Between the 1st and 2nd axle, a pair of fixed wheel recesses with cover, approx. 1,610 x 970 x 400 mm - Recess in the bevel as well as protruding into the loading area for parking excavator dipper stick approx. 2,900 x 750 x 210/290 mm - 1 pair of lashing rings, installed flat at the front of the load area (LC 10,000 daN) - 5 pairs of folding lashing rings on the outside (LC 5,000 daN) - 2 pairs of folding lashing rings on the outside (LC 10,000 daN) - 2 pairs of lashing rings in the dipper stick recess (LC 5,000 daN) - Cut-outs in the outer frame of the load area for securing straps (LC 2,000 daN) - Incl. three-part removable galvanized covers over the wheel recesses – max. point load 3.5 t / pc. Gijdpoup U Hzefx Adbjp Two-piece Steel Ramps: - One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood surfacing - Ramp with hydraulically folding ramp sections, hydraulic lifting gear, and hydraulically adjustable Axles and Tyres: - BPW axles and suspension, 2 rigid axles, 1 steering trailing axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lifting and lowering valve - Axle tool kit - Tyres 235/75 R 17.5 - TPMS tyre pressure monitoring system in accordance with ECE R 141 Accessories Included: - Mounts for warning signs left and right at the gooseneck and at the rear, each with socket - One spare wheel - 2" king pin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings at the galvanized front connector strip - 4 wheel chocks - Galvanized, extendable outriggers approx. 230 mm per side - Galvanized folding supports beneath the loading area bevel - Rear trailer bracket for rotating beacon - Cover plates for bridging the gap between ramps and load area - White reflective tape to EU regulations, sides and on extensions; rear in red - Electro-hydraulic unit installed at the rear beneath the loading area - Ramp control valves mounted on right trailer side - European reflective panels (red-yellow) on rear of trailer - Four extendable warning boards, approx. 423 x 423 mm, with position light - Bracket for rotating beacon on warning boards - Removable ALU side boards and rear board on gooseneck approx. 2,440 x 400 mm - Rear galvanized removable stakes (structure length approx. 2,560 mm) - 2 pairs of WADER container pockets in loading area for 20ft or 30ft container - 3 pairs of socket pockets for stakes 100 x 50 mm in outer frame of loading area - Removable, galvanized intermediate table with 1 pair of WADER container pockets - Square climbing strips 20 x 20 mm spaced every 200 mm on outer frame at loading bevelling - Painted sand layer on chequer plates of the gooseneck and loading area for anti-slip protection - 80 km/h speed stickers rear and both sides - Load manometer for axle load measurement, including load chart.

Stanje: novo, številka stroja/vozila: dc46d2e1cd272305b99fb3160, lastna masa: 9.800 kg, največja dovoljena obremenitev: 31.200 kg, skupna masa: 41.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Vehicle consisting of: Chassis low-bed semi-trailer Steel welded construction, kingpin plate with replaceable double kingpin and two kingpin positions 24-ton, 2-speed landing gear, single-sided operation, straight lower section, without thrust compensation Foldable rear support 2 wheel chocks with holders Side underrun protection, aluminum Quarter mudguards in front of and behind the axle assembly 1st pair of wheel recesses embedded in the low-bed drive lane area after the gooseneck, tapered for entry. Lower length approx. 1,600 mm, recess depth approx. 260 mm. Note! Frame in the main beam area is 260 mm higher than the wheel recess. 2nd pair of wheel recesses between axles A and B. Lower length approx. 350 mm, depth approx. 260 mm. Note! Frame in the main beam area is 260 mm higher than the wheel recess. If wheel loaders are to be transported and the total height needs to be checked, please provide technical data sheets of the wheel loader types with exact information (if total height is exceeded -> customer responsibility, approval required), (depending on ground clearance under the machines, inserts in the wheel recesses may be required by the customer) Wheel recess covers extendable from the main frame, with wooden inserts. Extensions extendable to 3,000 mm (not in the rear bevel and not in the lower wheel recesses). (The track width of construction machines or vehicles to be transported must not exceed the external frame width of 2,550 mm.) Storage compartment for wooden planks on the gooseneck, crosswise at the front 70 mm planks for extension to 3,000 mm Lashing eyes low-bed trailer 2 pairs of ring lashing eyes, each 5t at the front on the gooseneck 11 pairs of lashing mushrooms recessed at the top and side in the external frame, each 10t 2x on gooseneck, 9x distributed on low-bed platform; first lashing point 250 mm from the front and last at max. 250 mm from the rear, distance between lashing points no greater than 1,100 mm 8 pairs of stake pockets recessed in the external frame, internal dimensions 70 x 40 mm, or instead of stake pockets, 5t ring lashing eyes recessed in the floor Axles & Suspension SAF drum brake axles Axles/chassis laser-measured to reduce tire wear and fuel consumption Air suspension Wheels and tires 235 / 75 R 17.5 as per manufacturer's choice Steel rims in twin arrangement, factory silver Brake system 2-line compressed air braking system Spring-loaded parking brake EBS, electronic braking system with EBS socket at the front, without connection cable Attention: The trailer may only be towed by tractors that ensure the effectiveness of ABS! 2 non-interchangeable coupling heads at the front, without connecting line with lift & lower valve Axle load detection via EBS CAN bus signal, for display in the driver's cab (truck must be pre-equipped accordingly, not installed on truck; not a calibrated scale) Vehicle stability control system Electrics Giodpfei Ri Hcox Adbsp 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane mark lights at the rear 2 x 7-pin, non-interchangeable sockets at the front, without connection cable 1 x LED beacon with holder, switched via parking light (lamp removable) 2 pairs of warning panels, double LED illuminated and extendable to 3,000 mm, removable with plug Floor Gooseneck with steel/chequer plate covering Storage box embedded in the sloped transition to gooseneck Then with 70 mm softwood floor; in the lower wheel recesses and w

Stanje: rabljeno, največja dovoljena obremenitev: 31.870 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2024, naslednji pregled (TÜV): 03/2026, skupna širina: 2.550 mm, skupna višina: 3.130 mm, Oprema: ABS, K.SLS ECO Low Loader Semi-Trailer with Hydraulic Ramps, As-New Condition Technical Specifications Fifth Wheel Height: 1,250 mm * Overall Length: 13,190 mm * Neck Length: 3,950 mm * Platform Length: 9,240 mm Godpfjw A D D Sox Adbjip * Platform Height: 875 mm * Wheelbase: 8,100 mm * Overall Width: 2,550 mm * Unladen Weight: 10,130 kg * Permissible Gross Weight (60 km/h): 52,800 kg * Permissible Gross Weight (80 km/h): 48,000 kg ----Chassis BPW Axles with Air Suspension & Drum Brakes * 2x fixed front axles, 1x trailing steering axle at rear * WABCO braking system * Tyres: 12x 245/70 R17.5 * 1x spare wheel holder on front bulkhead * 1x load gauge * NATO socket ----Frame High-strength S700 MC steel * Gooseneck with 90° corners * 45 mm hardwood floor * Jost landing legs, foldable at rear * Inclined rear: 500x10° ----Ramp Drive-on ramp capacity: 40 tonnes * 2x long hydraulic ramps, laterally adjustable * 40 mm hardwood surfacing * Dimensions: 3,800 mm long, 850 mm wide * With ramp protection/tension chain ----Load Securing & Equipment Lashing rings & stake pockets with plug-in stakes * 6x container locks (for 1x20-ft container) * Steel front bulkhead (450 x 2,550 mm) * 2x aluminium side walls (360 x 1,500 mm) * 1x aluminium rear wall (360 x 2,550 mm) * Large internal toolbox in front of bulkhead * Side-mounted toolbox ----Accessories Toolbox * 1x beacon * 1x work light * 2x2 oversize load boards with LED * Oversize load package: extendable supports & timber planks ----Colour Chassis: RAL 3020 Traffic Red For further information, we are at your disposal.

Stanje: rabljeno, obratovalne ure: 3.221 h, nosilnost: 2.000 kg, dvižna višina: 4.500 mm, vrsta goriva: električni, gradbena višina: 2.500 mm, vrsta prenosa: samodejen, lastna masa: 4.500 kg, barva: rumena, prevoženi kilometri: 3.221 km, prva registracija: 06/1996, vzmetenje: drugo, število sedežev: 1, voznikova kabina: drugo, delovna širina: 3.000 mm, emisijski razred: noben, gorivo: elektrika, Kontaktna oseba za prodajo: Frank Rau / Ruščina / Angleščina / Nemščina - Bachar Ibrahim / Arabščina / Angleščina / Nemščina - Registracijska storitev, tehnični pregled/HU/SP/UVV, prevoz do pristanišča Avtomatski menjalnik, električen, osnovna barva: rumena Dodatna oprema Gisdpfxovy Dnmo Adbjp Video Tip nadgradnje: Baumann E 4S20/08 električni viličar nosilnost 2000 kg baterije 80V dolžina vilic 600 mm Pridržujemo si pravico do napak.

Stanje: rabljeno, največja dovoljena obremenitev: 34.840 kg, skupna masa: 48.000 kg, konfiguracija osi: 2 osi, prva registracija: 08/2001, with air suspension, hydromechanical forced steering, single-extendable loading platform STZ-L Gooseneck - robust steel welded construction - specified loading platform 4,150 x 2,480 mm - hydromechanical forced steering (dual-circuit steering) in low-profile design (235 mm build height) with adjustable guide elements - Ball bearing turntable-mounted fifth wheel plate with replaceable 2" kingpin and adjustable steering wedge Loading platform - single-extendable, designed as an outer and inner tube structure with a 1,000 mm long fixed front loading platform section - 500 mm long sliding table, adjustable and lockable on the inner tube - locking of extended sections via spring-loaded cylinders and cone bolts Chassis - 3-axle air-suspended chassis - BPW (Eco) axle assembly, consisting of three hydromechanically forced-steered stub axles - Axles with adjustable tapered roller bearings and automatic slack adjusters (ASA) - Lift and lowering valve Gsdpfxow Rix As Adbsip - Loading height: 885 mm Rear of vehicle - hydraulic rear support Braking system - 2-line full-air brake system with diaphragm brake cylinders - automatic load-dependent brake (ALB) - automatic slack adjusters (ASA) - parking brake via spring-loaded cylinders - ABS brake Special equipment - Central lubrication system "BekaMax" - Electric power unit with steering assist Technical data Gooseneck Loading platform (L x W): 4,150 x 2,480 mm Build height above fifth wheel: 235 mm Fifth wheel height (loaded): 1,250 mm Loading platform Loading platform (L x W): 9,200 x 2,550 mm Extendable by 6,300 mm In increments up to (L x W): 15,500 x 2,550 mm Loading height (loaded): 885 mm (+/- 100 mm) Widenable to 3,000 mm Steering 1st to 3rd axle hydromechanically forced steered (dual-circuit steering)