Nizki nakladalnik

Castera Oplegger

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 09/2005, skupna dolžina: 13.200 mm, skupna višina: 3.500 mm, vzmetenje: zrak, velikost pnevmatike: 235/75R17.5, stanje pnevmatik: 25 odstotek, Leto izdelave: 2005, Profil pnevmatik: 25% Zavore: bobnaste zavore Vzmetenje: zračno vzmetenje Zadnja os 1: Dimenzija pnevmatike: 235/75R17.5 Lastna teža: 11.000 kg Nosilnost: 23.000 kg Skupna dovoljena masa: 34.000 kg = Informacije o podjetju = Ob povpraševanju vedno navedite številko zaloge (8 mest). Hnjdpfx Aoyz Euvehysk Pri Smz Smeets & Zonen: - na trgu od leta 1976, že 65.000 prodanih/1.700 letno/1.000 na zalogi - Popolna storitev od A do Ž, vključno z organizacijo prevoza/carinske registracije (dodatno!) - Storitev natovarjanja za najcenejši prevoz po svetu Veliko skladišče vseh novih in rabljenih delov: Vedno oglašujemo z najboljšimi cenami Obiščite nas za popolno zalogo in informacije Sprejemamo vas na 130.000 m2 zemljišča z 20.000 m2 skladišča in popolnoma opremljeno delavnico. Oglejte si naš video

Stanje: novo, največja dovoljena obremenitev: 27.940 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2025, * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes * 3 x 11 t axles * Air suspension with lift and lower function, including RtR valve * Start assist for shunting, applied to first axle via EBS – no truck-side installation – when lift axle is raised +30 mm ride height * Smart-Board installed on trailer as an info tool, with pressure sensors for total axle load indication * Rear axle as self-steering axle with electro-pneumatic steering lock * Steering lock for trailing axle controlled from driver’s cab for maneuvering purposes via EBS (no truck-side installation) * 2" king pin * 1 lift axle * Side underrun protection * Front aluminium drop support legs and rear swing-down supports on chassis Hedpfowh Hdxex Ahyenk * Alcoa LVL One aluminium wheels * 15-pin electrical connector * LED lighting 12/24 V * Removable rear LED beacon * 2 additional LED reverse lights * 2 LED work lights mounted on trailer sides – no truck-side installation * 7-pin power socket at rear for overlength lighting * Side marker lamps with indicator activation * Tyre pressure monitoring system with display in truck via EBS signal (no truck-side installation) * Mechanically adjustable warning sign sets front and rear * Straight steel fenders * Saddle platform with 45° bevelled front corners and front toolbox made of galvanized, powder-coated steel sheet (B = 2,480 x H = 500 x L = 665 mm), top hinged lid and side doors at the beveled corners * 400 mm aluminium side boards (RAL 9010 pure white) fold-down and removable, mounted laterally on the saddle platform * Rear wall –150 mm– slotted in * Tapered rear on the saddle platform to lowbed approx. 700 mm long with chequer plate covering and lashing bar at end for attaching aluminium ramps * Saddle and lowbed platform with 50 mm clamped wooden planks * Tear plate above the axles * Prepared for 3 mounting shafts under the saddle platform for optional aluminium ramps storage * Swing arm as a carrier for connection lines from truck to trailer * Load securing package consisting of: outer frame of the saddle platform with punched holes, 45° bent and hole-pattern for lashing devices (2 t lashing force per point, min. 480 mm spacing), side-mounted 2 x 6.3 t recessed lashing rings per side, 1 x 16.5 t lashing ring per side at incline from lowbed to saddle platform, 2 pairs 16.5 t lashing rings in lowbed (1x on longitudinal beams after the step, 1x above the centre axle beside longitudinal beam), side 3 x 13.4 t lashing rings per outer frame (1x at start of platform step, 1x start of ramp slope, 1x end of ramp slope), 3 x 10 t each side (2x between front wheel recess and 1st axle, 1x between 2nd and 3rd axle), 3 x 5 t per side screwed to the wheel recess outer frames (2 at front, 1 at rear recess) * Extended excavator arm trough from end of last rigid axle over steering axle to end cross member, continuous with internal reinforcement profile approx. W = 770 mm x D rear = 270 / D front = 170 mm; each side 2 x 6.4 t lashing rings in the arm trough * Each side two wheel recesses, 390 mm deep and 640 mm wide for transporting wheel loaders with wheelbase 3,000–3,590 mm, tyre diameter up to 1,760 mm – retractable covers – * Second retractable cover ...

Stanje: rabljeno, konfiguracija osi: 2 osi, prva registracija: 08/1971, skupna dolžina: 12.800 mm, skupna višina: 3.000 mm, vzmetenje: jeklo, velikost pnevmatike: 9.5R17.5, stanje pnevmatik: 25 odstotek, Leto izdelave: 1971, Dimenzija pnevmatike: 9.5R17.5 Profil pnevmatike: 25 % Zavore: bobnaste zavore Vzmetenje: listnate vzmeti Hnodpfxjxrhlcs Ahyjk = Podatki o podjetju = Ob povpraševanju vedno navedite številko skladišča (8 številk) Pri SMZ Smeets & Zonen: - na trgu od leta 1976, prodanih več kot 65.000 vozil / 1.700 letno / 1.000 na zalogi - Popolna storitev od A do Ž, vključno z organizacijo prevoza / pridobitev carinske oznake (doplačilo!) - Nakladalna storitev za najcenejši transport po svetu Veliko skladišče vseh novih in rabljenih delov: Vedno oglašujemo z najboljšimi cenami Obiščite nas za celotno zalogo in dodatne informacije Sprejemamo vas na 130.000 m2 zemljišča z 20.000 m2 skladišča in popolnoma opremljeno delavnico. Oglejte si naš video