Nizki nakladalnik

Fruehauf Oplegger

Stanje: rabljeno, konfiguracija osi: 2 osi, prva registracija: 05/1997, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.300 mm, višina nakladalnega prostora: 1.400 mm, skupna dolžina: 8.200 mm, skupna višina: 3.000 mm, vzmetenje: jeklo, velikost pnevmatike: 445/65R22.5, stanje pnevmatik: 50 odstotek, Leto izdelave: 1997, Dimenzije pnevmatik: 445/65R22.5 Zavore: bobnaste zavore Vzmetenje: listno vzmetenje Zadnja os 1: profil pnevmatik: 50 % Zadnja os 2: profil pnevmatik: 25 % Lastna teža: 6.130 kg Dovoljena nosilnost: 26.870 kg Skupna dovoljena masa: 33.000 kg = Informacije o podjetju = Nedpjz D N Rhsfx Ab Dsdb Pri vseh povpraševanjih navedite številko zaloge (8 številk). Pri Smz Smeets & Zonen: - v poslu že od leta 1976, prodali že 65.000 vozil/1700 na leto/1000 na zalogi - Celovit servis od A do Ž, podpora pri transportu/organiziramo tudi označevanje vozil (dodatno!) - Storitev nakladanja za najcenejši transport po vsem svetu. Velika zaloga vseh novih in rabljenih delov. Vedno oglašujemo po najboljših cenah. Obiščite nas za celoten seznam zalog in dodatne informacije. Čakamo vas na 130.000 m2 površine, z 20.000 m2 skladiščnih in delavničnih prostorov. Oglejte si naš video.

Stanje: novo, največja dovoljena obremenitev: 27.940 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes * 3 x 11 t axles * Air suspension with lift and lower function, including RtR valve * Start assist for shunting, applied to first axle via EBS – no truck-side installation – when lift axle is raised +30 mm ride height * Smart-Board installed on trailer as an info tool, with pressure sensors for total axle load indication * Rear axle as self-steering axle with electro-pneumatic steering lock * Steering lock for trailing axle controlled from driver’s cab for maneuvering purposes via EBS (no truck-side installation) * 2" king pin * 1 lift axle * Side underrun protection * Front aluminium drop support legs and rear swing-down supports on chassis * Alcoa LVL One aluminium wheels * 15-pin electrical connector * LED lighting 12/24 V * Removable rear LED beacon * 2 additional LED reverse lights * 2 LED work lights mounted on trailer sides – no truck-side installation * 7-pin power socket at rear for overlength lighting * Side marker lamps with indicator activation * Tyre pressure monitoring system with display in truck via EBS signal (no truck-side installation) * Mechanically adjustable warning sign sets front and rear * Straight steel fenders * Saddle platform with 45° bevelled front corners and front toolbox made of galvanized, powder-coated steel sheet (B = 2,480 x H = 500 x L = 665 mm), top hinged lid and side doors at the beveled corners * 400 mm aluminium side boards (RAL 9010 pure white) fold-down and removable, mounted laterally on the saddle platform * Rear wall –150 mm– slotted in * Tapered rear on the saddle platform to lowbed approx. 700 mm long with chequer plate covering and lashing bar at end for attaching aluminium ramps * Saddle and lowbed platform with 50 mm clamped wooden planks * Tear plate above the axles * Prepared for 3 mounting shafts under the saddle platform for optional aluminium ramps storage * Swing arm as a carrier for connection lines from truck to trailer * Load securing package consisting of: outer frame of the saddle platform with punched holes, 45° bent and hole-pattern for lashing devices (2 t lashing force per point, min. 480 mm spacing), side-mounted 2 x 6.3 t recessed lashing rings per side, 1 x 16.5 t lashing ring per side at incline from lowbed to saddle platform, 2 pairs 16.5 t lashing rings in lowbed (1x on longitudinal beams after the step, 1x above the centre axle beside longitudinal beam), side 3 x 13.4 t lashing rings per outer frame (1x at start of platform step, 1x start of ramp slope, 1x end of ramp slope), 3 x 10 t each side (2x between front wheel recess and 1st axle, 1x between 2nd and 3rd axle), 3 x 5 t per side screwed to the wheel recess outer frames (2 at front, 1 at rear recess) Njdpfx Abswh Hdxs Dsdb * Extended excavator arm trough from end of last rigid axle over steering axle to end cross member, continuous with internal reinforcement profile approx. W = 770 mm x D rear = 270 / D front = 170 mm; each side 2 x 6.4 t lashing rings in the arm trough * Each side two wheel recesses, 390 mm deep and 640 mm wide for transporting wheel loaders with wheelbase 3,000–3,590 mm, tyre diameter up to 1,760 mm – retractable covers – * Second retractable cover ...

Stanje: rabljeno, konfiguracija osi: 1 os, prva registracija: 02/1999, dolžina tovornega prostora: 10.500 mm, širina tovornega prostora: 2.440 mm, višina nakladalnega prostora: 2.500 mm, skupna dolžina: 11.300 mm, skupna višina: 4.000 mm, vzmetenje: zrak, velikost pnevmatike: 275/70R22.5, stanje pnevmatik: 25 odstotek, Leto izdelave: 1999, Dimenzija pnevmatik: 275/70R22.5 Profil pnevmatike: 25% Zavore: Bobnaste zavore Vzmetenje: Zračno vzmetenje Lastna teža: 9.530 kg Nosilnost: 12.470 kg Dovoljena skupna masa: 22.000 kg = Podatki o podjetju = Prosimo, vedno navedite številko zaloge pri povpraševanju (8 števk) Pri Smz Smeets & Zonen: Ndodpfxjymt N Ro Ab Djb - na trgu od leta 1976, že 65.000 prodanih/1700 letno/1000 na zalogi - Popolna storitev od A do Ž, pomoč pri transportu/organiziramo carinsko označevanje (dodatno!) - Storitev nakladanja za najcenejši prevoz po svetu Veliko skladišče vseh novih in rabljenih delov: Vedno oglašujemo z našimi najboljšimi cenami Obiščite nas za popolno zalogo in informacije Sprejemamo vas na 130.000 m2 zemljišča s 20.000 m2 skladiščem in popolnoma opremljeno delavnico. Oglejte si naš video