Prevoz zabojnikov

Van Hool 20FT, 66° Tipping-chassis, ADR (EX/II, EX/III, ...

Stanje: rabljeno, največja dovoljena obremenitev: 29.690 kg, skupna masa: 37.800 kg, konfiguracija osi: 3 osi, prva registracija: 12/2002, Leto izdelave: 2002, Oprema: ABS, Curtain-sided low-loader Meusburger MPG 3 Dimensions: Length 13.90 m, Width 2.55 m (extendable to 3.50 m with rear posts), Height 4 m Loading dimensions: Platform height 80 cm, internal height in the low-bed area 3.20 m, low-bed to gooseneck height difference 67 cm, internal height in the gooseneck 2.53 m Condition: Good for its age Nsdpfx Agowrvubsyscp Tyres: 205/65R17.5, tread depth 50-70%

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, 7.82 m BDF Krone smooth-sided swap body, used (multiple units available) The exterior of the swap body, including the roof, will be painted in the customer’s chosen color (standard RAL shade). The substructure and parts of the support legs are not painted, as these are not visible once the unit is set down. Set-down height: 1120 mm The swap body is watertight, and the roller shutter operates smoothly. External dimensions (approx. in mm): Length: 7820 | Width: 2550 | Height: 2925 Internal dimensions (approx. in mm): Length: 7700 | Width: 2480 | Height: 2700 Door openings (in mm): Width: 2370 | Height: 2600 Lashing: Keyhole system For registration/operation max. permitted gross weight: 16,000 kg Suitable for intermodal transport, including rail coding as per DIN EN 13044 Rail approval: Code XL (for rail transport over 120 km/h) Floor frame: 195 mm high floor assembly including floor; longitudinal beams made of rectangular pipe with cross members and outer frame as welded construction with bottom guide tunnel 4 container corner castings on 20’ basis, symmetrical overhangs 4 gripper bar strips 7 pairs of lashing rings along the side rubbing rail Flooring: Type: BO WST 27 mm thick, waterproof, bonded phenolic plywood floor, strength according to DIN EN 283; floor load up to max. 5,460 kg fork axle load 2 ventilation openings in the front floor section (per GGVS) Box body: Type: AB WST Internal height: 2700 mm Portal height internal: 2525 mm Overall height: 2,925 mm Corner height: 2,900 mm Sealed body Side walls made from smooth, galvanized steel cassette panels Roof made of trapezoidal-profile steel sheet, height: 25 mm 2 ventilation slots per side wall • Rubbing rail and side wall with cut-outs for internal forklift collision guard, 3-sided, approx. 300 mm high • Front wall smooth, made from galvanized steel cassette panels • Front wall inside with 21 mm phenolic panel, 750 mm high; above that, a continuous 12 mm phenolic panel • Front wall outside, top section with offset (optimized for cornering) • Rear wall with roller shutter (internal width: 2370 mm), DB homologation Train Plus, replaceable rollers • Flat steel protection for roller shutter guide rail • Interior side walls fully fitted with keyhole rail sheets • 13 recessed steel guide rails on both left and right sides for double-deck loading beams • 13 LM loading beams for double-deck loading Ncsdpfx Ajvv R Ifogyep • Horizontal steel collision guard on rear profile, left & right Attention: Actual dimensions and other specific details may vary slightly due to ongoing product improvements.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, barva: bela, 7.45 m BDF Krone Jumbo smooth side swap body, used Exterior color: White Parking height adjustable from 920–1320 mm. The swap body is watertight and the roller shutter door operates smoothly. Forklift pockets Stackable External dimensions (approx., in mm): Length 7450 x Width 2550 x Height 2950 Internal dimensions (approx., in mm): Length 7289 x Width 2470 x Height 2700 Door openings (in mm): Width 2370 x Height 2550 Lashing: Keyhole type Weight: Tare 3340 kg Maximum payload: 12,660 kg Njdjuvibtjpfx Agyocp Gross weight: 16,000 kg Floor load capacity: 5,460 kg Volume: 49.74 m³ Pallet capacity (in mm): Euro 800x1200: 18 Metric 1000x1200: 14 Gitterbox 835x1240: 16 “Aussie” 1170x1170: 12 Note: Actual dimensions and other specific details may vary slightly from the above due to ongoing product improvements.

Stanje: rabljeno, Leto izdelave: 2007, dolžina zabojnika: 24 čevelj, barva: bela, skupna masa: 16.000 kg, lastna masa: 2.850 kg, širina tovornega prostora: 2.480 mm, dolžina tovornega prostora: 7.300 mm, višina nakladalnega prostora: 2.530 mm, številka stroja/vozila: 476575, BDF swap body / swap box with roller shutter door * Smooth-wall steel box * Length: 7.45 m Nodpfxenhlkcj Agyscp * Roller shutter door – fully serviced, fully functional! * Interior with keyhole plates * Lashing rings recessed into the side walls * Plywood anti-slip floor * Neutral white WITHOUT any lettering! * Paint chips on the side walls and roller shutter door * Light rust on frame and superstructure * Support height: 1.32 m * Loading height at roller door: 2,370 mm Multiple units available! Nationwide delivery possible! We always have a large quantity of various makes and models available for SALE or RENT!!! All prices are net plus legal VAT!

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, barva: bela, 7.82 BDF Krone smooth-sided swap body, used (multiple units available) Ncedpfjwahr Iex Agyop Exterior colour: white Coupling height: 1320 mm The swap body is watertight; the roller shutter door operates smoothly. Approximate exterior dimensions in mm: Length 7820 | Width 2550 | Height 2750 Approximate interior dimensions in mm: Length 7650 | Width 2480 | Height 2500 Door openings in mm: Width 2370 | Height 2600 Lashing: Keyhole type Tare weight: 3000 kg Maximum payload: 13,000 kg Gross weight: 16,000 kg Please note: Actual dimensions and specific details may vary slightly from those stated above due to ongoing product improvements.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33802032235, lastna masa: 4.983 kg, največja dovoljena obremenitev: 33.017 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2022, naslednji pregled (TÜV): 12/2025, vzmetenje: zrak, velikost pnevmatike: 385/55 R22.5", barva: svetlo zelena, Leto izdelave: 2022, Chassis Semi-Trailer for Containers Fine-grained steel welded construction, fifth wheel plate with replaceable 2" kingpin and two kingpin positions Container mounts: rear extension retracted: 1 x 20 ft or 1 x 30 ft flush with the rear New locking positions for improved fifth wheel load on 20" containers flush at rear Rear lights protected and recessed into the rear end Mid telescope 1st stage, rear extension extended 1st stage: 2 x 20 ft or 1 x 40 ft without gooseneck tunnel Mid telescope 1st stage, rear extension extended 1st stage: 1 x 40 ft with gooseneck tunnel Mid telescope 2nd stage, rear extension extended 2nd stage: 1 x 45 ft with gooseneck tunnel and overhanging to the rear Mid telescope 2nd stage, front extension extended 1st stage, rear extension extended 2nd stage: 1 x 45 ft with long gooseneck tunnel and chamfered corners Mid telescope as integrated central tube frame with pin locking Transport of filled tank containers is excluded. With rear height adjustment in galvanized version and foldable middle supports for containers without tunnel Plug-in front container guide Front cross member with Vario V3+ New Generation locking system Front extension mounted on rollers, manually extendable (for 45" container with long tunnel) Rear extension mounted on rollers, with manual hand crank 24 t 2-speed landing gear, single-sided operation, with straight base, without equalization 2 wheel chocks with holders Side impact protection, aluminium Underrun protection, galvanized steel Extendable underrun protection for 45 ft containers Rear splash guard full width (not in combination with forklift bracket) Half-shell mudguards With anti-spray mud flaps according to EC Rear bump guard Spare wheel holder for 1 wheel incl. attachment kit 1 toolbox for fire extinguisher up to 6 kg Nsdpfx Asww Iczjgyjcp 1 fire extinguisher (ABC powder, 6 kg)

Stanje: dober (rabljeno), konfiguracija osi: 3 osi, prva registracija: 03/2018, vzmetenje: zrak, barva: rdeča, Leto izdelave: 2018, Znamka osi: BPW Zavore: Kolutne zavore Nedpfox Dbh Ujx Agyocp Vzmetenje: Zračno vzmetenje Lastna teža: 3.540 kg Nosilnost: 35.460 kg Skupna masa: 39.000 kg Tehnično stanje: dobro Vizualno stanje: dobro Za več informacij kontaktirajte Arieja. = Dodatne možnosti in oprema = - Elektronski zavorni sistem (EBS) - Zračno vzmetenje - Kolutne zavore - Twist-locki = Opombe = ADR : EX/II / EX/III / FL / AT

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, prva registracija: 04/2003, skupna dolžina: 9.060 mm, skupna širina: 2.500 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5, medosna razdalja: 7.450 mm, Leto izdelave: 2003, Oprema: ABS, = Additional Options and Equipment = - ADR (Dangerous Goods Regulation compliant) - EBS (Electronic Braking System) - Lift axle - Alloy wheels - Air suspension - Disc brakes = Remarks = Attractive 2005 Van Hool 20FT tipper chassis, SAF axles with disc brakes (Intradisc), ABS, 2 x lift axle, ADR (EXII, EXIII, FL, AT), tiltable up to 20 degrees, 24V, unladen weight: 5,300 kg, maximum gross weight: 39,000 kg, 385/65-R22.5 tires (left: 4/11/12mm; right: 9/11/9mm), Dutch registration = Further Information = Axle configuration Nodpfov D Iblsx Agyjcp Tyre size: 385/65 R22.5 Axle make: SAF Intradisc Brakes: disc brakes Suspension: air suspension Rear axle 1: Alloy wheels; lift axle; max. axle load: 9,000 kg; left tyre tread: 25%; right tyre tread: 55% Rear axle 2: Alloy wheels; lift axle; max. axle load: 9,000 kg; left tyre tread: 70%; right tyre tread: 70% Rear axle 3: Alloy wheels; max. axle load: 9,000 kg; left tyre tread: 75%; right tyre tread: 55% Weights Unladen weight: 5,300 kg Payload: 33,700 kg gross weight: 39,000 kg Functional Body make: Van Hool 3B2013 Condition Technical condition: very good Optical condition: very good Identification Registration number: OH-91-FS Further information Please contact Arne Honingh for more information.

Stanje: novo, lastna masa: 34.500 kg, največja dovoljena obremenitev: 106.700 kg, skupna masa: 141.200 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.150 mm, širina tovornega prostora: 2.850 mm, višina nakladalnega prostora: 580 mm, velikost pnevmatike: 285/70 R19.5, barva: siv, obratovalna teža: 34.500 kg, Oprema: ABS, Gooseneck: - Gooseneck hydraulically lift/lowerable as well as detachable - Length approx. 3,650 mm - Extensive lashing positions - For tractor units: 6 x 4 or 8 x 4 3-Axle Compact Front Bogie: - Hook mounts at front and rear - Chassis length x chassis width approx. 3,560 mm x 2,850 mm - Extensive lashing positions Excavator Deck “BB-A”: - Telescopic excavator deck “BB-A” with drive-over deck hooks at the front and bolted lug coupling at the rear - Length x base width approx. 7,150 mm x 2,850 mm - Beam height x beam width approx. 430 mm x 1,350 mm - Loading height 580 mm with 150 mm ground clearance - 5 pairs of hanging lashing rings (LC 10,600 daN) - 4 pairs of threaded blocks M30 on inner beam for mounting screw-on rings 5-Axle Rear Bogie: - Mechanical bolt-on lug coupling for fitting a lowbed front, rear end traverse - Chassis length x chassis width approx. 6,840 mm x 2,850 mm - Extensive lashing positions Pendulum Axle and Tyres (front and rear bogie): - “PENDEL-AXLE”, all axles hydromechanically forced-steered - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pre-plugs for securing in lifted position - Final paint of axles with 2 coats of 2K paint, single-colour in MB 7350 Novagrau - Technical axle load: 14,640 kg (62 km/h) - Hydraulic axle compensation - Axle tools - Tyres 285/70 R19.5 Steering Override: - Remote steering from the front and rear via cable remote control with push buttons, including axle tracking control Ncjdewhywfepfx Agyop - Socket for steering control operation on the gooseneck - Cable remote control with push buttons including axle tracking control Included accessories: - Yellow-red air couplings on galvanised front connection rail - Steel headboard approx. 400 mm high - 4 wheel chocks with holders - 2 spare wheels 285/70 R19.5 - 3.5" kingpin - Gantry with winch for spare wheel at the front side of the gooseneck - Truck hydraulic connection with flow control valve (40 l/min), including gantry for suspension of supply lines, tractor unit tank must be at least 80 litres with couplings - White reflective tape according to EU regulations on sides and extension, red at rear - Plug-in ALU side panels and rear wall on gooseneck, approx. 400 mm high, anodised - Operating lever on gooseneck protected by folding cover - Separate air connection with air pistol on gooseneck - Central lubrication system BEKAMAX with standard grease NLGI-2: 1x on the gooseneck, 1x on 3-axle bogie, 1x on 5-axle bogie - Variomax tool kit - Multi-coupling hydraulic connections in the lowbed hook area - Front bogie with separate air connection for air screwdriver - Threaded inserts (ø 40 mm) every approx. 500 mm on outside of upper flange of excavator deck for screw rings - Folding extensions with steel mats, width adjustable from approx. 2,850 mm to approx. 3,250 mm - Steel mats with rubber covering approx. 12 mm thick - Two INOX toolboxes 855 x 340 x 390 mm - Radio remote control for steering override in addition to cable remote - Painted sand layer as anti-slip measure - 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery