Nizki nakladalnik za prevoz strojev na gradbišču

Syltrailer SYL table hydraulique (Location/rent)

Stanje: novo, prevoženi kilometri: 100 km, moč: 390 kW (530,25 KM), vrsta goriva: dizel, vrsta prenosa: samodejen, konfiguracija osi: 3 osi, skupna masa: 44.000 kg, barva: rumena, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, parkirni grelec, pogon na vsa štiri kolesa, žerjav, Immediately available!!! Specially designed recovery boom with lifting cradle for recovery and towing of damaged vehicles, trucks, tractor units, buses, trailers, etc. Fully hydraulic system. HDRV paint finish (STANDARD) TOOLBOXES (inside): yellow RAL 1032 TOOLBOXES (outside): yellow RAL 1032 LIFTING CRADLE: black, U-TEXT RAL 9005 RECOVERY BOOM: black, U-TEXT RAL 9005 REAR STABILIZERS: black, U-TEXT RAL 9005 COUNTERWEIGHT (front, under cab, if applicable): black, U-TEXT RAL 9005, smooth at the front subframe (STANDARD) - hot-dip galvanized - For front counterweight installation - rear section painted in superstructure color (STANDARD) - lifting angle 40° (see HDRV 1013) - mounting plates for main and auxiliary winch shackles 2x15000kg - left and right side at rear of the boom - space for spare wheel mount on the recovery boom - lifting cradle (STANDARD) - range of movement relative to horizontal axis -5°/+10° - load capacity retracted: 20,000 kg - load capacity extended: 10,000 kg - extension: 3,800 mm - area up to hydraulic rear stabilizers (STANDARD) - independently controlled - maximum width: 3,000 mm - swivelable stabilizers for work on asphalt and hydraulically extendable beam No HDRV 1013 Single extension: 0 - 3,000 mm maximum payload: 2,000 kg - tank positioned behind cab - Relocation of air reservoir behind cab - Relocation of battery behind cab - Relocation of AdBlue tank - Counterweight behind cab on front frame (weight 100 kg) - main winch COME UP Bison 50, mounted on recovery boom, pulling force 22 t, auxiliary winch COME UP Bison 50, mounted on recovery boom, pulling force 22 t, hydraulic system (STANDARD) - dual hydraulic pump (STANDARD) - hydraulic control block on right side (STANDARD) - on right side, rear connections for brake system supply, transferred from chassis - quick coupling with 20-meter cable - air pressure reel on left side of body - electrical connection for trailer + trailer hitch, from chassis - jump start 12V/24V, cable, lever, mounted on right side - jump start 12V/24V, cable, lever, mounted on left side Kfsdpepl Avdjfx Ab Uja - camera + LCD screen in cab - camera above winches + LCD screen in control box SCREEN: - vibration resistance: 10G - shock resistance: 100G - operating temperature: -30 to +70°C - CE marking - EMC approval - provision for EMERGENCY STOP switch - radio remote control - 1 function - made of aluminium - holder for tools and accessories - floor with rubber mats - small ladder - auxiliary ladder in toolbox opening - doors - guard rail on toolboxes - stainless steel - aluminium work platform, perforated, mounted on top of toolboxes - stainless steel holder in large toolbox, behind cab, for fork, hook, open toolbox edges with stainless steel profile - lighting package meets road traffic regulations - LED lighting in toolboxes - LED exterior lighting - LED warning lightbar GAMET DE LUX, 1800 mm - installation of warning lightbar on top of superstructure - ORANGE FLASH warning lights, 2 pcs front mounted - ORANGE FLASH warning lights, 2 pcs rear mounted - ORANGE FLASH warning lights, 2 pcs edge of last toolbox door - switches for all spotlights

Stanje: novo, največja dovoljena obremenitev: 29.500 kg, skupna masa: 42.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.100 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 300 mm, Leto izdelave: 2025, Oprema: ABS, * DOLL panther running gear + 5-year warranty * DOLL tronic operating and control system including radio remote control Kodpfx Aogvr T Hob Ujfa * Hydraulically detachable gooseneck * Reinforced chassis platform * Rear ramps * Outboard main frame * Hydraulic steering * Comprehensive load securing package * Low-bed length: 11,750mm (6,100mm + 5,650mm) or 12,400mm (6,700mm + 5,700mm) * Unladen weight: 13,700kg (+/- 2%) * Optional comprehensive equipment This trailer is available with a low-bed length of 6,700mm or 6,100mm and with short delivery times. Images may differ from the original. All information subject to change and without guarantee. Contact: Tel.:

Stanje: novo, velikost pnevmatike: 315/80R22.5, Oprema: ABS, 🇬🇧 SEM. MENCI SA700G TIPPING BODY - CHASSIS TYPE SA700G - AXLE BRAND ROR CAMPANATO ETO - AXLE CONFIGURATION: 1 STEERING + 2 FIXED Kfedpsvzh T Njfx Ab Uea - DISC BRAKES - KNORR SYSTEM: 2 SENSORS / 2 CHANNELS, 1 LIFT AXLE - WHEELBASE 1310 - STANDARD LANDING LEGS - CHASSIS COLOR MENCI METALLIC GREY, WITH MANUAL ANTI-INTRUSION BAR - PENTA HYDRAULIC CYLINDER - ROUND TYPE BODY, STEEL CONSTRUCTION - BODY LENGTH 7450 mm - BODY HEIGHT 1840 mm - REAR DOOR B, 20° ANGLED - BODY CAPACITY 30 m³ - FLOOR THICKNESS 5.5 mm, HB 500 - SIDE WALL THICKNESS 3.5 mm, HB 500 - FRONT WALL THICKNESS 4 mm, HB 500 - DOOR THICKNESS 4 mm, HB 500 - HYDRAULIC DOOR OPENING - HYDRAULIC DOG CLASP RELEASE - 2 SAFETY CLAMPS - BODY COLOR IVECO WHITE IC194 - SIDE BANDS COLOR BLUE RAL 5010 - DOOR WITHOUT SEAL - TMPS BRAND KNORR - REAR LIGHT SYSTEM EUROPOINT III - 10 SPEEDLINE DISCS 22.5x9.00, CENTER HOLE, FIXING D. 26 - 10 TYRES GY 315/80R22.5 KMAXSG2 - PREPARED FOR VIBRATOR - STAINLESS STEEL BOX 400x300x450 mm - STANDARD PRESSURE GAUGE - 2 TOWING HOOKS - QUICK DUMP WITH BUTTON VALVE - CRAMARO ELECTRIC ROLL COVER SYSTEM, TYPE C, WITH REMOTE CONTROL, BLUE RAL5010 - ARCH HEIGHT 500 mm - WHEEL HOOKS - POSSIBILITY OF FINANCING OR CUSTOM LEASING AVAILABLE AT LOCATION. - FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS, ALSO WITH ZERO DOWN PAYMENT. OTHER LOCATIONS OF OUR GROUP: DOMENICO TRUCK SRL NAPLES BRANCH DOMENICO ESPOSITO S.P.A. EBOLI (SA) BRANCH - OFFICIAL DEALER MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL, AND MAXUS CONTACTS: 0823 1686306 335 6713062 - 377 7064530 OPENING HOURS: MONDAY-FRIDAY 8:30 AM / 7:00 PM - SATURDAY 8:30 AM / 2:00 PM WE OFFER A WIDE SELECTION OF USED MULTIBRAND COMMERCIAL / INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf - Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way -S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man - Nissan V8 - Intarder- 770s -Limited Edition - 660 S Semi-trailer-Refrigerated Tipper – Lamberet - Schmitz Isuzu-Drop-side body-Crane-Tipper-4 Axles -4 Rear Axles -Tway-T-Way-540-460 HP - Xway-X-Way-Trilateral - V8 - Scania - Frost Edition Curtain Sider-Box bodies-Tail-lift - Refrigerated Cell-Insulated With Fridge - Van Domenico Truck srl accepts no responsibility for any discrepancies in equipment, options, or features that may differ at times from those described. Please verify the specifications of the specific vehicle.

Stanje: novo, največja dovoljena obremenitev: 49.000 kg, skupna masa: 60.800 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r 17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with front corners chamfered at 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Extendable Loading Platform: - Loading platform, extendable design with rear chamfer of approx. 1,000 mm x 8° - 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) - 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) - 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick, checker-plate covering above the axles Two-Part Removable Ramps: - One pair of galvanized two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering - Ramps with hydraulically folding ramp sections, hydraulic lifting mechanism, and hydraulic side-shift - Maximum load per pair: 40,000 kg Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and Tyres: - BPW axles, two fixed axles and two steering axles (self-steering), air suspended, with drum brakes, raise/lower function - Self-steering axles with electro-magnetic reverse lock, can be activated by reverse gear or manually - Axle tool kit - Tyre size 235/75 R 17.5 Brake System: - Braking system according to EU regulations with EBS-E (4S3M) Steel Structure: - Steel structure made of high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Paintwork: - First-class, long-lasting corrosion protection of the standard shot-blasted welded frame ensured by a 2-component (2K) zinc dust primer - High-quality single-tone topcoat using 2-component (2K) paint in Nova grey Electrical System: - Electrical system according to EU regulations, 24 volt lighting, ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX on the front connector strip with 24N, 24S, and 15-pin sockets Included Accessories: - 2" kingpin - Galvanized steel front wall, approx. 400 mm high - One spare wheel with holder in front of the headboard - Yellow-red air couplings on the galvanized front connector strip - 4 wheel chocks with holders on the front wall - Mount at the rear section of the gooseneck for ALU approach ramps - Galvanized folding supports underneath the loading platform chamfer - One holder for warning beacon - Cover plates to bridge the gap between ramps and loading platform - White reflective tape on the side, red on extension and rear, according to EU regulations - Electro-hydraulic power unit - At the gooseneck and ramps (left/right) a holder each for warning signs including socket - Control valves for the ramps mounted on the right side of the trailer - One mud flap at the rear of the trailer - Manual and documentation on USB stick - On the gooseneck, plug-in ALU side boards and rear wall approx. 2,440 x 400 mm - Rear galvanized plug-in stakes are removable (body length approx. 2,560 mm) - 4 pairs of WADER container pockets in the loading platform for one 20ft, two 20ft or one 40ft container - 7 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading platform - Galvanized, extendable platform wideners approx. 230 mm per side - Lift axle on the front axle with control system Kfjdpfx Aeh Etf Rob Uja - 20 x 20 mm square climbing bars - BEKAMAX central lubrication system - Four warning signs extendable by approx. 400 mm eac

Stanje: rabljeno, največja dovoljena obremenitev: 23.500 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2013, naslednji pregled (TÜV): 01/2025, dolžina tovornega prostora: 19.100 mm, Oprema: ABS, Faymonville 3-Axle Multimax Low Loader F-S43-1AAF First registration: .23 Gross weight: 35,000 kg Technical permitted gross mass: 58,600 kg Unladen weight: 11,500 kg Payload: 23,500 kg SAF axles: 8,000 kg + 8,000 kg + 8,000 kg Max. capacity: 11,200 kg + 11,200 kg + 11,200 kg Kingpin load / fifth wheel load: 11,000 kg Length: 13,675 mm, extendable to 19,475 mm Width: 2,540 mm / Height: 3,270 mm Loading platform: 13,300 mm, extendable to 19,100 mm Wheelbase: 2,900 mm / 1,360 mm Tyres: 245/70R17.5 1st axle liftable / 3rd axle steerable TÜV valid until: Further information available upon request by email! No guarantee for the accuracy of information/errors excepted! Details provided online are non-binding descriptions and do not constitute warranted characteristics. The seller assumes no liability for errors, input mistakes and data transmission errors. Subject to change without notice. Ksdpfx Abeu Ry T Rj Uofa Permanent purchase and sale as well as trade-in and rental of crane and lifting vehicles as well as construction and heavy-duty vehicles.

Stanje: novo, konfiguracija osi: 3 osi, Leto izdelave: 2025, GVN prikolica s 3 osovine, ekskluzivni niskopodni model Kedpoqxbcnsfx Ab Uefa Za više informacija kontaktirajte nas.

Stanje: novo, prevoženi kilometri: 100 km, moč: 184 kW (250,17 KM), vrsta goriva: dizel, skupna masa: 11.990 kg, zavore: retarder, vrsta prenosa: samodejen, emisijski razred: Euro 6, Oprema: ABS, klimatska naprava, navigacijski sistem, parkirni grelec, Car transporter for transporting 3 vehicles: * Truck body for transporting 1 vehicle * Tiltable loading platform for easy vehicle loading * Aluminium loading ramps * Platform area: approx. 600 x 240 cm * Hydraulic platform extension for lowering and lifting * When lowered, vehicles can be loaded using the ramps (solo operation) * Ramps stored laterally under the body * Winch with wireless and cable remote control * Body hot-dip galvanized Trailer: Kedpfstqzfxex Ab Uefa * BLYSS tandem trailer for 2 vehicles or vans * GVW 18,000 kg * Loading area: approx. 1,000 x 240 cm * Extendable rear section approx. 150 cm * Aluminium loading ramps * 2x 7,000 kg BPW axles * ABS braked * Trailer equipped with perforated drive plates * Vehicles can be secured in any position according to DIN standards * Trailer hot-dip galvanized Load securing accessories available: * Lashing and tie-down straps * Load bars * Safety vests * Transport boxes * Edge protectors * Airbags for load securing * Wheel chocks * etc. Financing and leasing available We manufacture bodies of any size and type for any chassis. Tarpaulin, GRP sandwich, aluminium. Visit us at: Bodies – Complete vehicles – Trailers – Consulting – Financing Subject to errors and prior sale, no liability for printing or input errors.

Stanje: novo, največja dovoljena obremenitev: 67.200 kg, skupna masa: 85.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment features. Full equipment details upon request. GOOSENECK * Gooseneck in SNT design for optimized loading platform length, approx. 3,700 mm long, with a rear chamfer approx. 1,000 mm x 10° * For tractor units: 6x2, 6x4, and short 8x4 * Plug-in steel front wall, approx. 400 mm high Kedpfx Aborgzv Ns Uofa * 3 kW electro-hydraulic unit for controlling hydraulic functions, excluding hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized finish * One plug-in ALU rearboard, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood flooring above the gooseneck, checker plate flooring above the king pin * 3.5 inch king pin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Round NATO socket on the front connection bar (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow control, incl. bracket for suspension of supply lines (Faymonville couplings) * 2 pairs of stake pockets sunk into the gooseneck, for plug-in stakes approx. 100 x 50 mm LOADING DECK * Extendable loading deck, length approx. 11,000 mm, rear chamfer approx. 500 mm x 10° * Pneumatic locking with conical locking bolt and reinforced lock positions, supply lines are routed protected in the extendable beams and automatically adjust to the respective platform length * BPW axles and suspension, 1st axle steerable, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Tyres: 235/75 R 17.5 3PMSF, twin tyres * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * Continuous 50 mm thick hardwood flooring on the loading deck, interrupted between the axles (increases coefficient of friction) * Slotted holes for attachable and re-positionable bridging elements: - on the fixed section behind the gooseneck - at the front of the loading area * 1 sliding intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate flooring, slotted holes front and rear for attachable and repositionable bridging elements * 1 pair of recessed horizontal lashing rings at the front of the fixed platform section (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the deck, fold-out to the outside (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering operated from both front and rear via cable remote control, with axle tracking control, no installation in the tractor unit * 1st axle with automatic lift-axle function and start-up aid according to EU Directive 2021/535 * Under the gooseneck and on the rear cross member, one 7-pin socket each on left and right, with bracket for warning signs * Painted sand coating on the outer frame of the platform as well as on the checker plates of the platform and in the transition area between the loading deck

Stanje: novo, konfiguracija osi: 1 os, skupna širina: 2.550 mm, Leto izdelave: 2025, Oprema: ABS, Met de vrachtwagen-trekkertransporter kunt u uw vrachtwagen-trekker snel vervoeren als u onderweg problemen heeft. Kjdpfxom Duc Uj Ab Ujfa Deze aanhanger kan zelfs de grootste cabine van elk merk transporteren. Twee lieren aan boord voor het op- en afslepen van de aanhanger. 24 volt, 400 ampère – elke vrachtwagen kan met deze aanhanger rijden, mits voorzien van een NATO-aansluiting. Voor bestellen kunt u Mannes bellen. Twente Trucks bedient de wereld.

Stanje: novo, največja dovoljena obremenitev: 50.400 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Kfedetx Nwnspfx Ab Uja Excerpt from the equipment specification. Full specification available on request. GOOSENECK * Gooseneck in SNT design to optimize platform length, approx. length 3,700 mm, with rear bevel of approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection rail with sockets * 3 kW electro-hydraulic unit for controlling hydraulic operations, except for hydraulic winches * 1 pair of detachable ALU side walls, approx. 400 mm high, anodized finish * 1 detachable ALU rear wall, approx. 400 mm high, anodized finish * Over the gooseneck, approx. 40 mm thick hardwood flooring, over the king pin with checker plate covering * 2-inch king pin * Mount at the rear of the gooseneck for ALU drive-on ramps * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) LOAD PLATFORM * Extendable load platform, approx. length 8,800 mm, with rear bevel approx. 500 mm x 10° * Recess in platform and rear bevel for accommodating an excavator dipper stick, approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, 1st axle self-steering, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reversing lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * Tires: 235/75 R 17.5 3PMSF twin tires * Mechanical landing legs with 2-speed gearbox and crank, JOST Modul B - static test load = approx. 50,000 kg * Platform with continuous and between-axles interrupted 50 mm thick hardwood flooring (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Extendable galvanized side extensions by approx. 230 mm each side (without wooden planks) * Wheel wells with square climbing strips, approx. 15 x 15 mm in front of the axles, continuous opening up to the cross member of the gooseneck, approx. 700 x 410 mm (W x D) * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks * Lockable aluminium elements on the extension tubes of the side extensions * Widenable U-profiles for inserting ALU covers: - on the fixed section behind the gooseneck - on the intermediate table - on the extendable platform * Wheel wells with square climbing strips, approx. 15 x 15 mm between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks * Lockable aluminium elements on the extension tubes of the side extensions * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with single-track monitoring of the axles, without installation in the tractor unit HYDRAULIC LOADING RAMPS * One pair of two-part steel ramps, type: DR-15/60-900-4350-KG-HV-M, approx. length 4,350 mm and width approx. 900 mm * Hydraulically folding ramp tips * Ramps hydraulically adjustable individually by approx. 235 mm outward and approx. 215 mm inward * Super Grip rubber surface approx. 25 mm and steel surface approx. 5 mm as additional