Prikolica za cisterno

Schmies.eu STS V-2.0 Saugfass, Vakuumsaugfass

Standard Equipment Basic

Vacuum Suction Tank STS V-2.0

Tank
• Tank with a capacity of 2,000 liters
• Tank hot-dip galvanized
• Tank slightly inclined to the rear for easier cleaning
• Side inspection opening on the tank to remove impurities or blockages without opening the tank lid
• Tank lid can be fully opened towards the passenger side and is secured with hook bolts
• Equipped as standard with 2 safety stages to prevent compressor damage
• Siphon separator
• Overflow with 2 balls and sight glass
• Pressure gauge on suction assembly with protective bracket
• Mechanical level indicator with colored scale

Engine and Compressor
• Vacuum compressor MEC 3000 with an air capacity of 3,500 liters
• Vacuum max. -0.8 bar (continuous operation at -0.5 bar)
• Overpressure max. 0.49 bar
• Maintenance-free V-belt drive for vacuum compressor
• B&S industrial engine Vanguard 13 HP
• Electric starter, oil sensor, control panel with ignition switch, battery, and tank
• Internal suction hose to prevent damage inside the engine compartment
• Silencer for vacuum compressor with oil catchment
Rcodpfjuq A Ucex Af Neh
• Stainless steel heat shield over the exhaust
• 1 liter biologically degradable compressor oil stored in oil bottle holder
• 5l petrol can in holder
• Standard funnel with long neck for changing and refilling engine oil
• All engine components and accessories housed in a lockable engine box

Chassis
• Self-supporting chassis, fully hot-dip galvanized
• Low-loader tandem chassis 3.5t
• Track width identical to passenger cars and Sprinter for optimal driving characteristics
• Lowest possible center of gravity for suction tank
• 2x axles each with 1,750kg load capacity and independent suspension by a renowned manufacturer
• Continuous welded V-drawbar
• Sturdy metal mudguards with light housing
• Pole holders for rapid securing of suction hoses with rubber bands
• Storage option for tools and accessories between the engine housing and the suction tank

Suction Tank
• Overrun brake with reverse automatic
• Automatically locking ball coupling
• Reinforced jockey wheel
• 13-pin cable connection

Connections and Hoses
• 2x suction hoses (3") 5m long with Perrot couplings
• 1x suction lance 3" (1500mm long)
• 1x Perrot connection (3") at the bottom of the tank lid
• 1x Perrot connection (3") on the right side in the direction of travel

If you are looking for something different from this machine, please do not hesitate to contact us directly. Our in-house vehicle manufacturing can meet almost any requirement.

For further detailed information and/or images, please contact us directly. A wide selection of other vehicles for PURCHASE or RENT can be found at:

Subject to change, prior sale, and errors. The buyer is obliged to independently verify the condition and equipment of the goods. Sale is made exclusively according to our terms and conditions and under exclusion of any warranty.

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.