Prikolica za cisterno

Vakuumsaugfass Vakuumsystem Saughänger Saugfass

Stanje: novo, največja dovoljena obremenitev: 33.329 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prostornina tovornega prostora: 40 m³, skupna višina: 3.950 mm, Oprema: ABS, Delivery time: approx. 4 months after order confirmation Kässbohrer SSK 40m³ Tipping Silo with Electric Hydraulic System BRAND NEW VEHICLE Tank: # 4 x filling domes DN 450 # 1 x filling connection DN 100 Storz B # Vacuum valve # Pressure relief valve 2.0 bar # Air pipe right side, aluminium # Aluminium ladder and catwalk on the left # Tank colour: RAL 9010 pure white Discharge system: # 4" stainless steel mixing valve right side with filter preparation and sight glass Hpsdsgimwispfx Aghoa # DN700 -> DN200 stainless steel cone valve, foldable and swingable to the side # DN 200 shut-off valve # Triple Solimar fluidisation system Hydraulics: # 4kW electro-hydraulic pump in aluminium box with stainless steel cover (mirror finish) # Aluminium hydraulic oil tank with approx. 190l capacity # hyva hydraulic cylinder, tipping angle 45° Chassis & axles: # BPW Airlight II axles with 22.5" disc brakes # 1st axle as lift axle # Wabco braking system EBS 4S / 2M with RSS # Wabco ECAS air suspension system # 6 x premium tyres 385 / 65 / 22.5" on Alcoa aluminium rims ET 0 (satin finish) # Chassis colour: RAL 3002 carmine red Other & accessories: # Aluminium combined toolbox with stainless steel cover (mirror finish) # Aspöck 24V lighting # LED work light, rear left # Hose container both sides, 5m length DN 200 (Storz A) # 1 x rubber mallet # 2 x hook spanners ----Subject to errors, changes and prior sale! Location: KTH-Trailer GmbH in 47574 Goch, Germany.

Stanje: novo, Leto izdelave: 2025, ALTRO-Tec GmbH supplies you with the right vacuum suction system for every application! S-Vac 5000 l / 5 m³ - Tank with 5,000-liter capacity - Hot-dip galvanized tank Hpodjtytzmepfx Aghoa - Inclined for improved cleaning - Lid for opening and cleaning - Tank lid lockable to the side - 4" suction/discharge port in the tank lid - Ports fitted with MZ brass gate valves - Italian coupling system with lever set - Overflow fitting with two float balls - Vacuum gauge on the overflow fitting - Tank lid secured with hook bolts - Mechanical fill level indicator with scale - Fork pockets / forklift shoes - Central hitching point when empty Power unit - Industrial petrol engine - Equipped with oil sensor and fuel tank - Electric start with powerful 12V battery - Maintenance-free drive via V-belt - Vacuum compressor with 9,000 l/min air throughput - Safety valve and drip oiler - Silencer for vacuum compressor with oil separator - Overpressure valve For technical data and further information, please contact us. Delivery worldwide, dealer inquiries are welcome. - Custom design and special equipment available on request, please contact us. ALTRO-Tec GmbH +49 (0)2723/717 611-0 or by email: info(ât)altro-tec.de Delivery times and availability upon agreement. Images are sample images, for current ones please contact us.

Stanje: novo, Leto izdelave: 2025, kapaciteta rezervoarja za gorivo: 2.000 l, ALTRO-Tec GmbH supplies the right vacuum suction system for any application! M-VAC 2000l / 2.0 m³ - 2.0 m³ hot-dip galvanized tank - Fully galvanized 3.5t chassis - Lid for opening the drum - Tank can be emptied by switching the compressor - Compact, maneuverable vehicle – ideal for urban use, parking garages, etc. - Suitable accessories for various applications available - Suction depths up to 6 meters possible - 3600 liters air capacity - Various drive options: petrol, diesel, electric Application examples: - Suction of heavily sandy drilling muds in specialist foundation engineering - Suction of liquids, including those containing solids - Cleaning of channels, shafts, pits - Emptying of mobile toilets and shafts - Suction of alkalis, emulsions, and wastewater - Large selection of accessories - Custom paintwork in customer color available (special equipment) With ALTRO-Tec GmbH, you get everything from a single source: - On-site demonstration and instruction at your construction site - Repair and maintenance - Fast spare parts supply - Assistance with troubleshooting - Bodywork of all kinds: Multi Car, hook lift system, and much more! - Custom constructions / special filters Hpjdju Ianvspfx Aghsa - Rental equipment and trade-ins delivery worldwide Images are sample pictures. For current images, please contact us at: 02723 717 611-0 or by email: info(at)altro-tec.de

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 1.180 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, prostornina tovornega prostora: 1,5 m³, Leto izdelave: 2024, Standard Equipment Basic Series models always in stock Vacuum Suction Tank STS VR-1.5 Rear Tipper 1,500 L Tank • 1,500-liter tank capacity • Rear tipper with wired remote control • Tank hot-dip galvanized • Tank slightly inclined to the rear for easier cleaning • Side rinsing opening in the tank for removing dirt or blockages without opening the tank lid • Tank lid opens completely towards the passenger side and is secured with hook bolts • Two integrated safety levels as standard to prevent compressor damage • Siphon separator • Overflow with 2 balls and sight glass • Manometer mounted on the suction assembly with protective guard • Mechanical fill level indicator with color scale Engine and Compressor • MEC 3000 vacuum compressor with 3,500 L air capacity • Maximum vacuum: -0.8 bar (continuous operation at -0.5 bar) • Maximum overpressure: 0.49 bar • Maintenance-free V-belt drive for vacuum compressor • B&S Industrial Engine Vanguard 13 HP • Electric starter, oil sensor, control panel with ignition lock, battery, and fuel tank • Internal suction hose to protect the engine compartment • Silencer for vacuum compressor with oil collector • Stainless steel heat shield above the exhaust • 1 liter biodegradable compressor oil stored in oil bottle holder Hpjdpfxoutcq Aj Aghsa • 5L petrol canister in bracket • Standard funnel with long neck for easy changing and refilling of engine oil • All engine components and accessories stored in lockable engine box Chassis • Self-supporting chassis, fully hot-dip galvanized • Low-loader tandem chassis 2.7t • Track width identical to car and Sprinter for optimal driving • Lowest possible center of gravity for the suction tank • 2 axles each with 1,350 kg load capacity, independent wheel suspension from a reputable manufacturer • Continuous welded V-drawbar • Robust metal fenders with lamp housings • Stake brackets for quick securing of suction hoses with rubber bands • Storage space for tools and accessories between engine enclosure and tank body Suction Tank • Overrun brake with reverse automatic • Automatically locking ball coupling • Reinforced jockey wheel • 13-pin cable connection Connections and Hoses • 2x suction hoses (3”) 5m long with Perrot couplings • 1x suction lance 3” (1,500 mm long) • 1x Perrot connection (3”) on the lower part of the tank lid • 1x Perrot connection (3”) on the right-hand side in the direction of travel If you are looking for something other than this unit, please do not hesitate to contact us directly. Our in-house vehicle construction division can fulfill nearly every requirement. For further detailed information and/or photos, please contact us directly. You will also find a large selection of other vehicles for SALE or RENT with us. Subject to changes, prior sale, and errors. The buyer is obliged to independently verify the condition and equipment of the goods. Sale is exclusively subject to our terms and conditions and excludes any warranty.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 1.250 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, prostornina tovornega prostora: 2 m³, Leto izdelave: 2025, Standard Equipment Basic Vacuum Suction Tank STS V-2.0 with 20m/2" Suction Hose Reel + MEC 5000 Tank • Tank capacity: 2,000 litres • Tank hot-dip galvanized • Tank slightly inclined to the rear for better cleaning • Lateral cleaning port on the tank for cleaning out blockages or impurities without opening the tank lid • Tank lid opens fully to the passenger side and is secured with hook bolts • Two integrated safety levels to prevent compressor damage as standard • Siphon separator • Overflow with two balls and sight glass • Vacuum gauge on the suction unit with protective guard • Mechanical fill level indicator with colour scale Engine and Compressor • MEC 5000 vacuum compressor with 5,200 l/min air capacity • Maximum vacuum: -0.8 bar (continuous operation at -0.5 bar) • Maximum overpressure: 0.49 bar • Maintenance-free V-belt drive for vacuum compressor • B&S Vanguard 18 HP industrial engine • Electric starter, oil sensor, control panel with ignition lock, battery and fuel tank • Internal intake hose to prevent damage within the engine unit • Silencer for vacuum compressor with oil trap • Stainless steel heat deflector above exhaust • 1 litre biodegradable compressor oil stored in oil bottle holder • 5l petrol can in holder • Standard: long-neck funnel for engine oil changes and refilling • All engine components and accessories are housed in a lockable engine compartment Chassis • Self-supporting chassis, fully hot-dip galvanized • Low-loader tandem chassis 3.5t • Track width identical to passenger cars and Sprinters for optimized driving • Lowest possible centre of gravity for the suction tank • 2 axles with 1,750kg load capacity each and independent suspension by a reputable manufacturer • Continuous welded V-drawbar • Sturdy wheel arches with metal lamp housings • Stake holders for quick securing of suction hoses with rubber bands • Storage options for tools and accessories between engine enclosure and suction tank • Overrun brake with automatic reverse (Rückmatic) • Automatically locking ball coupling • Reinforced jockey wheel • 13-pin electrical connector Connections and Hoses • 2x suction hoses (3”) 5m long with Perrot couplings • 1x suction lance 3” (1,500mm long) • 1x Perrot connector (3”) at bottom of tank lid • 1x Perrot connector (3”) side-mounted, facing right in direction of travel If you are looking for something different than this unit, do not hesitate to contact us directly. Our in-house vehicle construction can meet almost any requirement. For further details and/or photos, please contact us directly. You can find a wide selection of other vehicles for SALE or RENT at: Subject to change, prior sale and errors excepted. The buyer is obliged to verify the condition and equipment of the goods independently. Sale exclusively according to our terms and conditions and with exclusion of any warranty. Hjdpfx Asu Rpfcoghspa

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, prostornina tovornega prostora: 2 m³, Leto izdelave: 2025, Standard Equipment Basic STS VS-1.5 Tank • Tank with 1,500-litre capacity • Hot-dip galvanised tank • Lateral cleaning opening in the tank for removing contamination or blockages without opening the tank lid • Tank lid can be fully opened towards the passenger side and secured with hook bolts • Equipped with 2 safety stages as standard to prevent compressor damage • Syphon separator • Overflow with 2 balls and sight glass • Manometer on suction assembly with protective bracket • Mechanical fill level indicator with colour scale Engine and Compressor • MEC 3000 vacuum compressor with 3,500 l air output • Maximum vacuum: -0.8 bar (continuous operation at -0.5 bar) • Maximum overpressure: 0.49 bar • Maintenance-free V-belt drive for vacuum compressor • B&S Vanguard 13 HP industrial engine • Electric starter, oil sensor, control panel with ignition lock, battery, and fuel tank • Internal suction hose to prevent protection issues within engine unit • Silencer for vacuum compressor with oil catcher • Stainless steel heat shield over exhaust • 1 litre of biodegradable compressor oil stored in oil bottle holder • 5-litre petrol canister in holder • Standard funnel with long neck for engine oil change and refilling • All engine components and accessories stored in a lockable engine compartment • Engine compartment made of aluminium, powder-coated in desired colour Chassis/Base Frame • Self-supporting chassis, fully hot-dip galvanised • Forklift-compatible base frame Connections and Hoses • 2x suction hoses (3”), 5 m length with Perrot couplings • 1x suction lance 3" (1,500 mm long) Hedpfxsu Rpc Uj Aghspa • 1x Perrot connection (3") at the bottom of the tank lid • 1x Perrot connection (3") laterally right in the direction of travel If you are looking for something other than this unit, please do not hesitate to contact us directly. With our in-house vehicle construction, we can meet almost every requirement. For further details and/or images, please contact us directly. You will find a large selection of other vehicles for SALE or RENT at our company. Modifications, prior sale and errors excepted. The buyer is obliged to independently verify the condition and equipment of the goods. Sale is exclusively subject to our general terms and conditions and without any guarantee or warranty.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 1.200 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, prostornina tovornega prostora: 2 m³, Leto izdelave: 2025, Standard Equipment Basic Vacuum Suction Tank STS V-2.0 Tank • Tank with a capacity of 2,000 liters • Tank hot-dip galvanized • Tank slightly inclined to the rear for easier cleaning • Side inspection opening on the tank to remove impurities or blockages without opening the tank lid • Tank lid can be fully opened towards the passenger side and is secured with hook bolts • Equipped as standard with 2 safety stages to prevent compressor damage • Siphon separator • Overflow with 2 balls and sight glass • Pressure gauge on suction assembly with protective bracket • Mechanical level indicator with colored scale Engine and Compressor • Vacuum compressor MEC 3000 with an air capacity of 3,500 liters • Vacuum max. -0.8 bar (continuous operation at -0.5 bar) • Overpressure max. 0.49 bar • Maintenance-free V-belt drive for vacuum compressor • B&S industrial engine Vanguard 13 HP • Electric starter, oil sensor, control panel with ignition switch, battery, and tank • Internal suction hose to prevent damage inside the engine compartment • Silencer for vacuum compressor with oil catchment • Stainless steel heat shield over the exhaust • 1 liter biologically degradable compressor oil stored in oil bottle holder • 5l petrol can in holder • Standard funnel with long neck for changing and refilling engine oil • All engine components and accessories housed in a lockable engine box Chassis • Self-supporting chassis, fully hot-dip galvanized • Low-loader tandem chassis 3.5t • Track width identical to passenger cars and Sprinter for optimal driving characteristics • Lowest possible center of gravity for suction tank • 2x axles each with 1,750kg load capacity and independent suspension by a renowned manufacturer • Continuous welded V-drawbar • Sturdy metal mudguards with light housing • Pole holders for rapid securing of suction hoses with rubber bands • Storage option for tools and accessories between the engine housing and the suction tank Suction Tank • Overrun brake with reverse automatic • Automatically locking ball coupling • Reinforced jockey wheel • 13-pin cable connection Connections and Hoses • 2x suction hoses (3") 5m long with Perrot couplings • 1x suction lance 3" (1500mm long) • 1x Perrot connection (3") at the bottom of the tank lid • 1x Perrot connection (3") on the right side in the direction of travel Hpedpfx Agjuq A Ucjhea If you are looking for something different from this machine, please do not hesitate to contact us directly. Our in-house vehicle manufacturing can meet almost any requirement. For further detailed information and/or images, please contact us directly. A wide selection of other vehicles for PURCHASE or RENT can be found at: Subject to change, prior sale, and errors. The buyer is obliged to independently verify the condition and equipment of the goods. Sale is made exclusively according to our terms and conditions and under exclusion of any warranty.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 1.280 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, prostornina tovornega prostora: 1,5 m³, Leto izdelave: 2025, Standard Basic Equipment Series models always in stock Vacuum Suction Tank STS VR-2.0 Rear Tipper 2,000 l Tank • 2,000-litre tank capacity • Rear tipper with wired remote control • Tank hot-dip galvanized • Tank slightly sloped backwards for easier cleaning • Lateral cleaning port in tank to remove contamination or blockages without opening the tank lid • Tank lid opens fully to passenger side and secured with hook bolts • Two safety stages as standard to prevent compressor damage • Siphon separator • Overflow with 2 balls and sight glass • Manometer on suction assembly with protective bracket • Mechanical fill level indicator with color scale Engine and Compressor • MEC 3000 vacuum compressor with 3,500 l air capacity • Maximum vacuum: -0.8 bar (continuous operation at -0.5 bar) • Maximum overpressure: 0.49 bar • Maintenance-free V-belt drive for vacuum compressor • B&S Vanguard 13 HP industrial engine • Electric starter, oil sensor, control panel with ignition lock, battery, and tank • Internal suction hose to protect the engine unit • Silencer for vacuum compressor with oil catcher • Stainless steel heat shield above exhaust • 1-litre biodegradable compressor oil stored in oil bottle holder • 5-litre petrol can in holder • Standard funnel with long neck for changing and topping up engine oil • All engine components and accessories stored in a lockable engine box Chassis • Fully self-supporting, hot-dip galvanized chassis • 3.5t tandem low-loader chassis • Track width identical to passenger cars and Sprinter vans for optimal driving • Lowest possible centre of gravity for suction tank • Two axles with 1,750 kg load capacity each and independent suspension by reputable manufacturer • Continuous welded V-drawbar • Sturdy metal mudguards with lamp housings Hjdpfx Agsutclyshjpa • Rung holders for quick securing of suction hoses with rubber bands • Storage option for tools and accessories between engine compartment and tank Suction Tank • Overrun brake with reverse automatics • Automatically locking ball hitch • Reinforced jockey wheel • 13-pin cable connector Connections and Hoses • 2 x suction hoses (3”) 5 m long with Perrot couplings • 1 x suction lance 3” (1,500 mm long) • 1 x Perrot connection (3”) at bottom of tank lid • 1 x Perrot connection (3”) on right side in driving direction If you are looking for something different from this unit, do not hesitate to contact us directly. Our in-house vehicle manufacturing can accommodate almost any request. For further detailed information and/or pictures, please contact us directly. A large selection of additional vehicles for PURCHASE or RENT is available. Subject to change, prior sale, and errors. Buyers are obliged to independently verify the condition and equipment of the goods. Sale is exclusively subject to our general terms and conditions and excludes any warranty.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, prostornina tovornega prostora: 2 m³, Leto izdelave: 2025, Standard Equipment Basic STS VS-2.0 Tank • 2,000-litre capacity tank • Tank hot-dip galvanized • Side cleaning opening in the tank for removing impurities or blockages without opening the tank lid • Tank lid can be fully opened towards the passenger side and secured with hook bolts • Standard with two safety levels to prevent damage to the compressor • Syphon separator • Overflow with two balls and sight glass • Pressure gauge on suction assembly with protective bracket • Mechanical level indicator with colour scale Engine and Compressor • MEC 3000 vacuum compressor with 3,500 L air capacity • Vacuum max. -0.8 bar (continuous operation at -0.5 bar) • Overpressure max. 0.49 bar • Maintenance-free V-belt drive for vacuum compressor • B&S industrial engine Vanguard 13 HP • Electric starter, oil sensor, control panel with ignition lock, battery and fuel tank • Internal suction hose to prevent damage within the engine unit • Silencer for vacuum compressor with oil collector • Stainless steel heat shield above the exhaust • 1-litre biodegradable compressor oil in oil bottle holder • 5-litre petrol canister in holder • Standard funnel with long neck for engine oil changes and refills • All engine components and accessories housed in lockable engine box • Engine box made from aluminium and powder-coated in desired colour Chassis/Base Frame • Self-supporting chassis, fully hot-dip galvanized Hpsdpfx Agsu Rpczjhja • Forklift-compatible base frame Connections and Hoses • 2x suction hoses (3”) 5m long with Perrot couplings • 1x suction lance 3” (1,500 mm long) • 1x Perrot coupling (3”) in lower part of tank lid • 1x Perrot coupling (3”) on the side, right in direction of travel If you are looking for a different machine than this, do not hesitate to contact us directly. With our in-house vehicle construction, we can accommodate almost any requirement. For further detailed information and/or images, please contact us directly. You will find a wide range of other vehicles for SALE or RENT with us. Modifications, prior sale and errors excepted. The buyer is obliged to independently verify the condition and equipment of the goods. Sale is subject exclusively to our general terms and conditions and under exclusion of any warranty.

Stanje: rabljeno, največja dovoljena obremenitev: 34.000 kg, prva registracija: 04/1996, velikost pnevmatike: 385/65/22,5, Leto izdelave: 1996, Ogled možen samo po predhodnem dogovoru. Vzmetenje: • 1. os: zračno vzmetenje • 2. os: zračno vzmetenje • 3. os: zračno vzmetenje Zavorni sistem: • 1. os: bobnasta zavora • 2. os: bobnasta zavora s vzmetnim akumulatorjem • 3. os: bobnasta zavora s vzmetnim akumulatorjem Dvignjena os: • 1. os: ne • 2. os: ne • 3. os: ne Opremljenost s pnevmatikami: • 1. os: enojna kolesa • 2. os: enojna kolesa • 3. os: enojna kolesa • Velikost pnevmatik: 385/65/22,5 • Globina profila v %: 90 % • Tip platišč: aluminijasta Ostala oprema • Lastna teža: 6800 kg • Nosilnost: 28200 kg • Prostornina tovora: 23 m³ • 2 prekata 50/50% • Delovni nadtlak: 2,0 bara Hpodswir U Sopfx Aghea • ABS • EBS • Število osi: 3 • Proizvajalec osi: BPW Dimenzije vozila pribl.: • Dolžina: 9.050 mm • Širina: 2.550 mm • Višina: 3.550 mm • Material: nerjavno jeklo Vmesna prodaja, napake in tipkarske napake pridržane.