Prikolica Za Cisterno nakup rabljenega (32.053)

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 1.250 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, prostornina tovornega prostora: 2 m³, Leto izdelave: 2026, Standard Equipment Basic Vacuum Suction Tank STS V-2.0 with 20m/2" Suction Hose Reel + MEC 5000 Tank • Tank capacity: 2,000 litres • Tank hot-dip galvanized • Tank slightly inclined to the rear for better cleaning • Lateral cleaning port on the tank for cleaning out blockages or impurities without opening the tank lid • Tank lid opens fully to the passenger side and is secured with hook bolts • Two integrated safety levels to prevent compressor damage as standard • Siphon separator • Overflow with two balls and sight glass • Vacuum gauge on the suction unit with protective guard • Mechanical fill level indicator with colour scale Engine and Compressor • MEC 5000 vacuum compressor with 5,200 l/min air capacity • Maximum vacuum: -0.8 bar (continuous operation at -0.5 bar) • Maximum overpressure: 0.49 bar • Maintenance-free V-belt drive for vacuum compressor • B&S Vanguard 18 HP industrial engine Bljdpfju Rpfcjx Al Hog • Electric starter, oil sensor, control panel with ignition lock, battery and fuel tank • Internal intake hose to prevent damage within the engine unit • Silencer for vacuum compressor with oil trap • Stainless steel heat deflector above exhaust • 1 litre biodegradable compressor oil stored in oil bottle holder • 5l petrol can in holder • Standard: long-neck funnel for engine oil changes and refilling • All engine components and accessories are housed in a lockable engine compartment Chassis • Self-supporting chassis, fully hot-dip galvanized • Low-loader tandem chassis 3.5t • Track width identical to passenger cars and Sprinters for optimized driving • Lowest possible centre of gravity for the suction tank • 2 axles with 1,750kg load capacity each and independent suspension by a reputable manufacturer • Continuous welded V-drawbar • Sturdy wheel arches with metal lamp housings • Stake holders for quick securing of suction hoses with rubber bands • Storage options for tools and accessories between engine enclosure and suction tank • Overrun brake with automatic reverse (Rückmatic) • Automatically locking ball coupling • Reinforced jockey wheel • 13-pin electrical connector Connections and Hoses • 2x suction hoses (3”) 5m long with Perrot couplings • 1x suction lance 3” (1,500mm long) • 1x Perrot connector (3”) at bottom of tank lid • 1x Perrot connector (3”) side-mounted, facing right in direction of travel If you are looking for something different than this unit, do not hesitate to contact us directly. Our in-house vehicle construction can meet almost any requirement. For further details and/or photos, please contact us directly. You can find a wide selection of other vehicles for SALE or RENT at: Subject to change, prior sale and errors excepted. The buyer is obliged to verify the condition and equipment of the goods independently. Sale exclusively according to our terms and conditions and with exclusion of any warranty.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 1.280 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, prostornina tovornega prostora: 1,5 m³, Leto izdelave: 2026, Standard Basic Equipment Series models always in stock Vacuum Suction Tank STS VR-2.0 Rear Tipper 2,000 l Tank • 2,000-litre tank capacity • Rear tipper with wired remote control • Tank hot-dip galvanized • Tank slightly sloped backwards for easier cleaning • Lateral cleaning port in tank to remove contamination or blockages without opening the tank lid • Tank lid opens fully to passenger side and secured with hook bolts • Two safety stages as standard to prevent compressor damage • Siphon separator • Overflow with 2 balls and sight glass • Manometer on suction assembly with protective bracket • Mechanical fill level indicator with color scale Engine and Compressor • MEC 3000 vacuum compressor with 3,500 l air capacity • Maximum vacuum: -0.8 bar (continuous operation at -0.5 bar) • Maximum overpressure: 0.49 bar • Maintenance-free V-belt drive for vacuum compressor • B&S Vanguard 13 HP industrial engine • Electric starter, oil sensor, control panel with ignition lock, battery, and tank • Internal suction hose to protect the engine unit • Silencer for vacuum compressor with oil catcher • Stainless steel heat shield above exhaust • 1-litre biodegradable compressor oil stored in oil bottle holder • 5-litre petrol can in holder • Standard funnel with long neck for changing and topping up engine oil • All engine components and accessories stored in a lockable engine box Chassis • Fully self-supporting, hot-dip galvanized chassis • 3.5t tandem low-loader chassis • Track width identical to passenger cars and Sprinter vans for optimal driving • Lowest possible centre of gravity for suction tank • Two axles with 1,750 kg load capacity each and independent suspension by reputable manufacturer • Continuous welded V-drawbar • Sturdy metal mudguards with lamp housings • Rung holders for quick securing of suction hoses with rubber bands Bjdpfxoutclyo Al Hjlg • Storage option for tools and accessories between engine compartment and tank Suction Tank • Overrun brake with reverse automatics • Automatically locking ball hitch • Reinforced jockey wheel • 13-pin cable connector Connections and Hoses • 2 x suction hoses (3”) 5 m long with Perrot couplings • 1 x suction lance 3” (1,500 mm long) • 1 x Perrot connection (3”) at bottom of tank lid • 1 x Perrot connection (3”) on right side in driving direction If you are looking for something different from this unit, do not hesitate to contact us directly. Our in-house vehicle manufacturing can accommodate almost any request. For further detailed information and/or pictures, please contact us directly. A large selection of additional vehicles for PURCHASE or RENT is available. Subject to change, prior sale, and errors. Buyers are obliged to independently verify the condition and equipment of the goods. Sale is exclusively subject to our general terms and conditions and excludes any warranty.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 1.180 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, prostornina tovornega prostora: 1,5 m³, Leto izdelave: 2026, Standard Equipment Basic Series models always in stock Vacuum Suction Tank STS VR-1.5 Rear Tipper 1,500 L Tank • 1,500-liter tank capacity • Rear tipper with wired remote control • Tank hot-dip galvanized • Tank slightly inclined to the rear for easier cleaning • Side rinsing opening in the tank for removing dirt or blockages without opening the tank lid • Tank lid opens completely towards the passenger side and is secured with hook bolts • Two integrated safety levels as standard to prevent compressor damage • Siphon separator • Overflow with 2 balls and sight glass • Manometer mounted on the suction assembly with protective guard • Mechanical fill level indicator with color scale Engine and Compressor • MEC 3000 vacuum compressor with 3,500 L air capacity • Maximum vacuum: -0.8 bar (continuous operation at -0.5 bar) • Maximum overpressure: 0.49 bar • Maintenance-free V-belt drive for vacuum compressor • B&S Industrial Engine Vanguard 13 HP • Electric starter, oil sensor, control panel with ignition lock, battery, and fuel tank • Internal suction hose to protect the engine compartment • Silencer for vacuum compressor with oil collector • Stainless steel heat shield above the exhaust • 1 liter biodegradable compressor oil stored in oil bottle holder • 5L petrol canister in bracket • Standard funnel with long neck for easy changing and refilling of engine oil • All engine components and accessories stored in lockable engine box Chassis • Self-supporting chassis, fully hot-dip galvanized • Low-loader tandem chassis 2.7t • Track width identical to car and Sprinter for optimal driving • Lowest possible center of gravity for the suction tank • 2 axles each with 1,350 kg load capacity, independent wheel suspension from a reputable manufacturer • Continuous welded V-drawbar • Robust metal fenders with lamp housings • Stake brackets for quick securing of suction hoses with rubber bands • Storage space for tools and accessories between engine enclosure and tank body Suction Tank • Overrun brake with reverse automatic • Automatically locking ball coupling • Reinforced jockey wheel • 13-pin cable connection Connections and Hoses • 2x suction hoses (3”) 5m long with Perrot couplings • 1x suction lance 3” (1,500 mm long) • 1x Perrot connection (3”) on the lower part of the tank lid • 1x Perrot connection (3”) on the right-hand side in the direction of travel If you are looking for something other than this unit, please do not hesitate to contact us directly. Our in-house vehicle construction division can fulfill nearly every requirement. For further detailed information and/or photos, please contact us directly. You will also find a large selection of other vehicles for SALE or RENT with us. Bjdpfxjutcq As Al Holg Subject to changes, prior sale, and errors. The buyer is obliged to independently verify the condition and equipment of the goods. Sale is exclusively subject to our terms and conditions and excludes any warranty.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 1.100 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, prostornina tovornega prostora: 1,5 m³, Leto izdelave: 2026, Standard Equipment Basic Series models always in stock Vacuum Suction Tank STS V-1.5 Tank • 1,500 liter tank capacity • Hot-dip galvanized tank • Tank slightly inclined to the rear for easier cleaning • Side rinsing port in the tank to remove impurities or blockages without opening the tank lid • Tank lid opens fully to the passenger side and secured with hook bolts • 2 safety stages installed as standard to prevent compressor damage • Siphon separator Bsdpfxeur Tkqo Al Helg • Overflow with 2 balls and sight glass • Vacuum gauge on suction assembly with protective bracket • Mechanical fill level indicator with color scale Engine and Compressor • MEC 3000 vacuum compressor, 3,500 l/min air handling capacity • Maximum vacuum -0.8 bar (continuous operation at -0.5 bar) • Maximum overpressure 0.49 bar • Maintenance-free V-belt drive for the vacuum compressor • B&S Vanguard 13 HP industrial engine • Electric starter, oil sensor, control panel with ignition lock, battery, and tank • Internal suction hose to protect the engine unit • Silencer for the vacuum compressor with oil catch • Stainless steel heat shield above the exhaust • 1-liter biodegradable compressor oil stored in oil bottle holder • 5-liter fuel canister in mounting bracket • Standard with long-neck funnel for oil changes and refilling • All engine components and accessories stored in lockable engine compartment Chassis • Self-supporting, fully hot-dip galvanized chassis • 2.7t tandem low-loader chassis • Track width matches passenger vehicles and Sprinter vans for optimal handling • Lowest possible center of gravity for the suction tank • 2 axles, each with 1,350 kg capacity and independent suspension from a reputable manufacturer • Continuous welded V-drawbar • Sturdy metal wheel arches with lamp housings • Stake pockets for quick securing of suction hoses with rubber straps • Storage space for tools and accessories between engine compartment and tank Vacuum Tank • Overrun brake with reverse automatic • Self-locking ball coupling • Reinforced jockey wheel • 13-pin electrical connector Connections and Hoses • 2 suction hoses (3"), each 5 m long with Perrot couplings • 1 suction lance 3" (1,500 mm long) • 1 Perrot connection (3") at the bottom of the tank lid • 1 Perrot connection (3") on the right side in the direction of travel If you are looking for equipment other than this particular unit, please contact us directly. Our custom vehicle manufacturing can accommodate almost any requirement. For further details and/or pictures, please contact us directly. We offer a wide selection of additional vehicles FOR SALE or RENT. Subject to change, prior sale, and errors. The buyer is obligated to independently inspect the condition and equipment of the goods. Sale exclusively under our terms and conditions and with all warranties excluded.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 1.200 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, prostornina tovornega prostora: 2 m³, Leto izdelave: 2026, Standard Equipment Basic Vacuum Suction Tank STS V-2.0 Tank • Tank with a capacity of 2,000 liters • Tank hot-dip galvanized • Tank slightly inclined to the rear for easier cleaning • Side inspection opening on the tank to remove impurities or blockages without opening the tank lid • Tank lid can be fully opened towards the passenger side and is secured with hook bolts • Equipped as standard with 2 safety stages to prevent compressor damage • Siphon separator • Overflow with 2 balls and sight glass • Pressure gauge on suction assembly with protective bracket Bodpfxjuq A Ucs Al Hslg • Mechanical level indicator with colored scale Engine and Compressor • Vacuum compressor MEC 3000 with an air capacity of 3,500 liters • Vacuum max. -0.8 bar (continuous operation at -0.5 bar) • Overpressure max. 0.49 bar • Maintenance-free V-belt drive for vacuum compressor • B&S industrial engine Vanguard 13 HP • Electric starter, oil sensor, control panel with ignition switch, battery, and tank • Internal suction hose to prevent damage inside the engine compartment • Silencer for vacuum compressor with oil catchment • Stainless steel heat shield over the exhaust • 1 liter biologically degradable compressor oil stored in oil bottle holder • 5l petrol can in holder • Standard funnel with long neck for changing and refilling engine oil • All engine components and accessories housed in a lockable engine box Chassis • Self-supporting chassis, fully hot-dip galvanized • Low-loader tandem chassis 3.5t • Track width identical to passenger cars and Sprinter for optimal driving characteristics • Lowest possible center of gravity for suction tank • 2x axles each with 1,750kg load capacity and independent suspension by a renowned manufacturer • Continuous welded V-drawbar • Sturdy metal mudguards with light housing • Pole holders for rapid securing of suction hoses with rubber bands • Storage option for tools and accessories between the engine housing and the suction tank Suction Tank • Overrun brake with reverse automatic • Automatically locking ball coupling • Reinforced jockey wheel • 13-pin cable connection Connections and Hoses • 2x suction hoses (3") 5m long with Perrot couplings • 1x suction lance 3" (1500mm long) • 1x Perrot connection (3") at the bottom of the tank lid • 1x Perrot connection (3") on the right side in the direction of travel If you are looking for something different from this machine, please do not hesitate to contact us directly. Our in-house vehicle manufacturing can meet almost any requirement. For further detailed information and/or images, please contact us directly. A wide selection of other vehicles for PURCHASE or RENT can be found at: Subject to change, prior sale, and errors. The buyer is obliged to independently verify the condition and equipment of the goods. Sale is made exclusively according to our terms and conditions and under exclusion of any warranty.

Stanje: novo, Leto izdelave: 2026, kapaciteta rezervoarja za gorivo: 2.000 l, ALTRO-Tec GmbH provides you with the right vacuum suction system for every application! M-VAC 2000 l / 2.0 m³ - 2.0 m³ hot-dip galvanized tank - Fully galvanized 3.5 t chassis - Drum lid can be opened - The tank can be emptied by switching the compressor - Compact, highly maneuverable vehicle ideal for city use, parking garages, etc. - Suitable accessories for various applications available - Suction depths up to 6 meters possible - 3600 liters air flow rate - Various drive types: petrol, diesel, electric Typical applications: - Suction of heavily sandy drilling muds in special civil engineering - Suction of liquids, also with solids - Cleaning of channels, shafts, pits - Emptying mobile toilets and shafts - Suction of lyes, emulsions, and wastewater - Wide range of accessories - Custom paintwork available (optional extra) At ALTRO-Tec GmbH, you get everything from a single source: - On-site demonstration and operator training - Repair and maintenance - Rapid spare parts supply - Assistance with troubleshooting - Superstructures of any kind: multi-carriers, hook-lift systems, and much more! Bedpfx Aleu Ianvo Holg - Custom builds / special filters - Rental equipment and trade-in Delivery worldwide Images shown are sample images. For current photos, please contact us at: +49 2723 717 61-0 or by email: anfrage(ât)altro-tec.de

Stanje: rabljeno, Leto izdelave: 2026, · 1.5 m³ hot-dip galvanized container · Fully galvanized 2.7 t chassis · Lid can be opened completely · By switching the compressor from suction to pressure mode, the container can be emptied quickly · Compact and maneuverable trailer, ideal for urban areas, parking garages, etc. · Suction depths of up to 6 meters possible · Standard air output 3,600 l/min; performance boost or continuous operation versions available · Various drive options: petrol, diesel, electric · Suitable accessories available for different applications, including: - Hose reel, high-pressure cleaner, floor suction nozzle, suction lance, side advertising panels on the upper hose brackets, workplace lighting, rotating beacon, custom paintwork Application examples: · Extraction of highly sandy drilling slurries in specialist foundation engineering · Extraction of liquids, even those containing solids · Cleaning of channels, shafts, pits · Emptying of mobile toilets and shafts · Suction of alkalis, emulsions, and waste water At ALTRO-Tec GmbH you get everything from a single source: · On-site demonstration and operator training · Repair and maintenance · Fast spare parts supply · Assistance with issues and repairs · Any type of bodywork: Multi Car, hook lift system, and much more! · Custom builds/special filters as well as rental equipment Bjdpfot N U S Rox Al Hslg · Trade-ins accepted delivery world wide Images are sample images. For up-to-date information, please contact us by email: anfrage(ât)altro-tec.de

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, prva registracija: 11/2025, naslednji pregled (TÜV): 02/2026, prostornina tovornega prostora: 24.300 m³, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2015, Oprema: ABS, Naprodaj je Hendricks / Doerth cisternska prikolica iz 10/2015. Cisterna iz leta 1985. NOV TÜV do 02-2025. Novo opravljena tehnična varnostna kontrola do 08/2025. A3-homologacija za dizelsko kurilno olje. Polnjenje od zgoraj in spodaj. 4 prekatI (7500/5350/4200/7250) skupaj 24.300L. Naslednji pregled cisterne v 10/2028. Prosti iztok zadaj na prikolici. Brez napak in takoj pripravljena za uporabo! Blsdpfox Dk S Njx Al Heg

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 7.500 mm, Leto izdelave: 1986, Leto izdelave: 1986 BPW osi z bobnastimi zavorami Dolžina: 7,50 m Blsdpfey Iwqpex Al Hjg

Stanje: novo, lastna masa: 180 kg, največja dovoljena obremenitev: 750 kg, skupna masa: 750 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 2.500 mm, širina tovornega prostora: 1.510 mm, višina nakladalnega prostora: 100 mm, velikost pnevmatike: 155/70 R13, barva: modra, Enosredni motociklistični priklopnik, proizvajalec WM-Meyer, tip: Mot 7525/151, notranje mere pribl. (DxŠxV): 2500 x 1510 x 100 mm, dovoljena skupna masa: 750 kg Oprema: - Podvozje s vzdrževanjem neodvisno gumijasto torzijsko osjo, pocinkano - Pnevmatske gume 155/70 R13 - Pocinkana V-vlečna greda s krogelno kljuko - Svetlobna oprema 12V z 13-polnim vtičem in vzvratno lučjo - Tla iz večkrat lepljene protidrsne in vodoodporne vezane plošče - Tristranske bočne stene iz aluminija, višine cca 100 mm Bedey Hh D Rjpfx Al Helg - 6 nastavljivih pritrdilnih obročev - 4 pritrdilni obroči na tleh (Slike lahko prikazujejo dodatno opremo za doplačilo! Pridržujemo si pravico do napak, sprememb in nepravilnosti!)

Stanje: novo, največja dovoljena obremenitev: 605 kg, skupna masa: 750 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 2.100 mm, širina tovornega prostora: 1.220 mm, MOTO III MOTORCYCLE TRAILER FOR 3 MOTORCYCLES Technical Data: Trailer Type: Moto III Gross Weight: 750 kg Payload: 605 kg External Dimensions: L: 301 cm, W: 160 cm, H: 95 cm Internal Dimensions: L: 210 cm, W: 122 cm Loading Height: approx. 53 cm Floor: 3 motorcycle rails with brackets + 1 loading ramp Lashing Points: Lashing brackets on the frame Frame: Welded steel, hot-dip galvanized Electrics: 7-pin, 12V Tyres: 155/70R13 Axle Manufacturer: AL-KO or KNOTT Number of Axles: 1 Non-braked axle Bledpfx Aoy Ikubol Hog Jockey wheel The compact trailer for motorcycle transport A 100 km/h approval is only possible if the towing vehicle has a minimum unladen weight of 2500 kg! plus registration certificate / COC document €39.00 All prices include VAT. Opening hours in Reichertshofen: Monday to Friday from 08:00 am to 12:00 pm and 1:00 pm to 5:00 pm Saturday and Sunday closed Visit us also at =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. =.=.=.=.=. You can also obtain your desired trailer and accessories by arrangement at the following locations: B L Y S S Transporttechnik GmbH Burenkamp 18-20 46286 Dorsten-Wulfen Tel.: B L Y S S Transporttechnik GmbH Sonnenbergstr. 5a 38723 Seesen Tel.: =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. =.=.=.=.=. Images may not correspond to the standard specification; technical changes (e.g. tyre sizes) reserved.

Stanje: novo, največja dovoljena obremenitev: 1.606 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.300 mm, širina tovornega prostora: 1.770 mm, višina nakladalnega prostora: 1.860 mm, VT2743HT Small Livestock Transport Trailer Technical Specifications: * Trailer type: VT2743HT Small Livestock Transport Trailer * Gross vehicle weight: 2,700 kg * Payload: 1,606 kg * Internal dimensions (L x W x H): 430 cm x 177 cm x 186 cm * Floor: Multiplex & checker plate * Side walls: Aluminium * Frame: Welded steel, hot-dip galvanized * Electrics: 13-pin, 12V * Tyres: 185R14C * Axle manufacturer: AL-KO or KNOTT * Number of axles: 2 * Braked axle * Jockey wheel included as standard * Suspension chassis + 100 km/h approval Vehicle registration certificate / COC statement subject to an additional charge of €39.00 All prices incl. VAT. Visit us also at Our opening hours in Reichertshofen: Mon. to Fri. from 08:00 - 12:00 and 13:00 - 17:00 Closed Saturday and Sunday Bedpfx Aljvzfh Ds Hslg Alternatively, you can obtain your custom trailer and accessories by arrangement at the following locations: BLYSS Transporttechnik GmbH Burenkamp 18-20 46286 Dorsten-Wulfen Tel.: BLYSS Transporttechnik GmbH Sonnenbergstr. 5a 38723 Seesen Tel.: Images may not correspond to standard equipment, technical modifications (e.g. tyre sizes) reserved.

Stanje: novo, skupna masa: 3.500 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 4.300 mm, širina tovornega prostora: 1.770 mm, višina nakladalnega prostora: 1.860 mm, VT3543HT Small Livestock Transport Trailer Technical Specifications: * Trailer type: VT3543HT Small Livestock Transport Trailer * Gross vehicle weight: 3,500 kg * Internal dimensions: L: 430 cm, W: 177 cm, H: 186 cm * Suspension with shock absorbers, approved for 100 km/h * Floor: multiplex & checker plate * Drop sides: aluminium * Frame: welded steel, hot-dip galvanized * Electrical system: 13-pin, 12V * Tyres: 185R14C * Axle manufacturer: AL-KO or KNOTT * Number of axles: 2 * Braked axle * Support wheel included as standard Plus vehicle registration certificate / COC document €39.00 All prices include VAT. Visit us also at Business hours Reichertshofen: Mon. to Fri. 08:00 - 12:00 and 13:00 - 17:00 Saturday and Sunday closed =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. You can also order your custom trailer and accessories upon request here: BLYSS transporttechnik GmbH Burenkamp 18-20 46286 Dorsten-Wulfen Tel.: .:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.: . BLYSS transporttechnik GmbH Bsdpjvd Aiqsfx Al Holg Sonnenbergstr. 5a 38723 Seesen Tel.: =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. Images may differ from standard equipment, technical changes (e.g. tyre sizes) reserved.

Stanje: novo, največja dovoljena obremenitev: 1.834 kg, skupna masa: 2.700 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 3.000 mm, širina tovornega prostora: 1.600 mm, višina nakladalnega prostora: 1.860 mm, VT2730HT Small Livestock Transport Trailer Technical Specifications: * Trailer Type: VT2730HT Small Livestock Transport Trailer * Gross Vehicle Weight: 2,700 kg * Payload: 1,834 kg * Internal Dimensions: Length: 300 cm, Width: 160 cm, Height: 186 cm * Suspension: Shock absorber chassis, approved for 100 km/h * Floor: Multiplex and checker plate * Side Panels: Aluminium * Frame: Welded steel, hot-dip galvanized via immersion bath * Electrics: 13-pin connector, 12V * Tyres: 185R14C * Axle Manufacturer: AL-KO or KNOTT Bledpfjvy R Aqjx Al Hog * Number of Axles: 2 * Braked Axles * Jockey wheel included as standard Plus vehicle registration document / COC certificate: €39.00 All prices include VAT. Opening Hours Reichertshofen: Monday to Friday from 08:00 to 12:00 and 13:00 to 17:00 Closed on Saturday and Sunday You can also obtain your desired trailer and accessories at the following locations by prior arrangement: BLYSS Transporttechnik GmbH Burenkamp 18-20 46286 Dorsten-Wulfen Tel.: BLYSS Transporttechnik GmbH Sonnenbergstr. 5a 38723 Seesen Tel.: Images may show optional equipment; technical specifications such as tyre sizes subject to change.

Stanje: novo, največja dovoljena obremenitev: 795 kg, skupna masa: 1.300 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 2.580 mm, širina tovornega prostora: 1.400 mm, višina nakladalnega prostora: 1.480 mm, VT1326H Small Livestock Transport Trailer TECHNICAL DATA: * Trailer type: VT1326H * Gross weight: 1,300 kg * Payload: 795 kg * Internal dimensions: L: 258 cm, W: 140 cm, H: 148 cm Bjdethkilspfx Al Hslg * Floor: Multiplex & chequer plate * Standard shock absorber chassis * Side walls: aluminium * Frame: welded steel, hot-dip galvanized * Electrics: 13-pin, 12V * Tyres: 185R14C * Axle manufacturer: AL-KO or KNOTT * Number of axles: 1 * Braked axle * Standard jockey wheel Plus registration certificate / COC document: €39.00 All prices include VAT. Visit us also at Reichertshofen opening hours: Mon.–Fri. from 08:00–12:00 and 13:00–17:00 Saturday and Sunday closed =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. =.=.=.=. You can also arrange to receive your custom trailer and accessories here: BLYSS transporttechnik GmbH Burenkamp 18-20 46286 Dorsten-Wulfen Tel.: .:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.: .:.:.:.:. BLYSS transporttechnik GmbH Sonnenbergstr. 5a 38723 Seesen Tel. =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. =.=.=.=. Images may not reflect standard equipment; technical changes (e.g., tyre sizes) reserved.

Stanje: rabljeno, največja dovoljena obremenitev: 574 kg, skupna masa: 750 kg, konfiguracija osi: 1 os, prva registracija: 08/2022, dolžina tovornega prostora: 2.600 mm, širina tovornega prostora: 1.550 mm, višina nakladalnega prostora: 145 mm, skupna širina: 2.047 mm, skupna višina: 905 mm, Poceni prikolica za motorno kolo, proizvajalec Unsinn, tip UA 2615-7-13, največja dovoljena masa 750 kg, nagibna, 1x airlines letev montirana na sredini, 100 km/h Vozilo ni pripravljeno Možne napake in vmesna prodaja pridržane Bodpfx Asymvalel Hslg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 6.470 kg, največja dovoljena obremenitev: 17.530 kg, skupna masa: 24.000 kg, dolžina tovornega prostora: 7.300 mm, širina tovornega prostora: 2.450 mm, višina nakladalnega prostora: 2.500 mm, vzmetenje: zrak, Leto izdelave: 2023, Biomasni priklopnik HYDROFAST HFP-3 / kiper / 2023 Leto 2023 Tehnični podatki Dovoljena skupna masa 24.000 kg Teža 6.470 kg Nosilnost 17.530 kg Notranje dimenzije Dolžina 730 cm Širina 245 cm Višina 250 cm Zračno vzmetenje. Bledey Iyi Uopfx Al Hsg ABS Tehnično in vizualno stanje je odlično.

Stanje: novo, skupna masa: 3.500 kg, dolžina tovornega prostora: 9.000 mm, širina tovornega prostora: 2.550 mm, Offer: Boat Trailer P3520HT BOAT TRAILER Technical Specifications: Trailer Type: P3520HT Gross Weight: 3,500 kg Payload Capacity: 2,755 kg Internal Dimensions: Length 900 cm, Width 255 cm Frame: Robust, distortion-free frame design, fully hot-dip galvanized Electrics: 13-pin, 12V Tyres: 185/R14C Axle Manufacturer: KNOTT axle – infinitely adjustable Number of Axles: 2 Braked Axle Jockey wheel fitted as standard Bedey E Ndpepfx Al Hjlg Winch: Longitudinally adjustable Bow support: Length- and height-adjustable Suspension with shock absorbers, incl. 100 km/h approval Number of Keel Rollers: 6 high-strength polyurethane keel rollers, height-adjustable Number of Side Rollers: 6 high-strength polyurethane double side rollers Rear light bar: extendable and removable Marker lights Offer valid while stocks last! Offer only valid in Reichertshofen! Additional charge for vehicle registration document / COC certificate: €39.00 Prices incl. VAT. Business hours Reichertshofen: Monday to Friday: 08:00–12:00 and 13:00–17:00 Closed on Saturday and Sunday Visit us at anhaenger.de You can also obtain your desired trailer and accessories upon request at: BLYSS Transporttechnik GmbH Burenkamp 18-20 46286 Dorsten-Wulfen Tel.: 02369-984850 BLYSS Transporttechnik GmbH Sonnenbergstr. 5a 38723 Seesen Tel.: 05381/980700 Images may not reflect standard equipment. Technical modifications (e.g., tyre sizes) reserved.

Stanje: novo, največja dovoljena obremenitev: 402 kg, skupna masa: 750 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.250 mm, širina tovornega prostora: 1.740 mm, višina nakladalnega prostora: 1.500 mm, OFFER! Dog4Go Sport 3 Dog Trailer Technical specifications: * Trailer model: Dog4Go Sport 3 * Gross vehicle weight: 750 kg * Payload: 402 kg * Suspension: shock absorber system * Internal box dimensions: 2x L: 113 cm, W: 60 cm, H: 71 cm; 1x L: 122 cm, W: 63 cm, H: 71 cm * External dimensions: L: 325 cm, W: 174 cm, H: 150 cm * Frame: hot-dip galvanized steel * Electrics: 13-pin, 12V * Tyres: 165/70R14, aluminium wheels * Number of axles: 2 * Unbraked axles * LED lighting, interior and exterior * Walls: insulated sandwich panels * 12V fan with control unit * Profiles: black anodized aluminium * Storage box on drawbar * Sport aluminium roof, black * Drain holes in each box * Wooden floors in each compartment * Water tank 20 l with 12V pump * Door sills made of aluminium checker plate Offer valid while stocks last! Offer only valid in Reichertshofen! Vehicle registration certificate / DEKRA inspection surcharge: €219 All prices incl. VAT. Opening hours Reichertshofen: Bjdpfx Alovy R A Rs Helg Monday to Friday from 08:00 to 12:00 and 13:00 to 17:00. Closed Saturdays and Sundays. =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. =.=.=.=.=.=.= You can also order your desired trailer and accessories by arrangement at: BLYSS Transporttechnik GmbH Burenkamp 18-20 46286 Dorsten-Wulfen Tel.: BLYSS Transporttechnik GmbH Sonnenbergstr. 5a 38723 Seesen Tel.: =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. =.=.=.=.=.=.= Images may not reflect the standard configuration; technical modifications (e.g. tyre sizes) reserved.

Stanje: novo, lastna masa: 600 kg, največja dovoljena obremenitev: 900 kg, skupna masa: 1.500 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 2.440 mm, širina tovornega prostora: 1.440 mm, višina nakladalnega prostora: 1.800 mm, skupna dolžina: 4.100 mm, skupna širina: 2.050 mm, skupna višina: 2.440 mm, vzmetenje: drugo, velikost pnevmatike: R14, barva: bela, zavoro prikolice: prikolica s zavoro, WM Meyer AZKF 1525/145 with WMK4 Cooling Unit - Aluminium floor and impact protection - Insulated floor Technical Data: * Permissible gross weight: 1500 kg * Unladen weight: 600 kg * Payload: 900 kg * Box internal dimensions (LxWxH): 244 x 144 x 180 cm * Overall dimensions (LxWxH): 410 x 205 x 244 cm * Tyres: R14 / Loading height approx. 54 cm * K-value: approx. 0.49 Equipment: * Single-axle, braked * Ball coupling, overrun brake with automatic reverse function * Axle(s), V-drawbar frame galvanized, rubber suspension axle(s) * Reinforced jockey wheel * 4 heavy-duty support stands * Galvanized steel mudguards * Light bar, 12 V lighting according to StVZO * Phenolic resin coated plywood floor (insulated), approx. 60 mm * Superstructure made of sandwich polyester with GRP outer layers on both sides * Walls, door and roof white (similar to RAL 9016) * Full insulation: walls and roof approx. 60 mm, door approx. 54 mm * Double-leaf rear door with cold store lock * Interior lighting 230 V with switch (inside, rear right top) * WMK 4 refrigeration unit, 230V, mounted on front wall * Includes 230V interior lighting The AZKF is a robust refrigerated box trailer for a temperature range from +2°C to +10°C, featuring comprehensive standard equipment. This includes, among others, the WMK4 refrigeration unit, heavy-duty support stands at all four corners of the body, a wooden interior impact guard (height: 25 cm), and a practical cold store lock which, even when the trailer is locked, allows it to be opened from the inside. As with other refrigerated and deep-freeze box trailers from wm meyer, the walls and roof are constructed from 60 mm thick sandwich polyester panels with polyurethane foam core. This construction not only ensures a comparatively low unladen weight, but also optimal insulation and stability. Please note: we do not join panels; each wall and roof is made from a single sheet rather than multiple pieces. This is not only more attractive, but also much more practical, e.g., when applying decals or paint, and it reduces unnecessary exposed surfaces for rain and snow. The polyester outer layers are also particularly practical as they prevent condensation, which is common with metal-panelled refrigerated trailers. And most importantly: the 60 mm thick floor is also insulated, ensuring that cold does not escape downwards. The AZKF is very competitively priced, making it especially appealing to first-time buyers. ----> Many more trailers available at >>> trelex.de! Bsdpfxsy H Iy Eo Al Hjlg * Financing and trade-in available! * Huge selection: Over 300 trailers in stock at all times – visit us! * Professional and fair advice, quick processing. * Any questions? Just call! ATTENTION: No immediate takeaway, advance order required!

Stanje: novo, lastna masa: 290 kg, največja dovoljena obremenitev: 710 kg, skupna masa: 1.000 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 2.510 mm, širina tovornega prostora: 1.510 mm, višina nakladalnega prostora: 100 mm, skupna dolžina: 3.780 mm, skupna širina: 2.040 mm, skupna višina: 900 mm, vzmetenje: drugo, barva: modra, zavoro prikolice: prikolica s zavoro, WM Meyer MOT 1025/151 Motorcycle Transport Trailer – Single-Axle, Braked Low Loader Blodpey H Hhhjfx Al Heg - NEW VEHICLE - Platform with standard equipment: 2 stationary rails, 1 loading rail, front railing. Can be upgraded with drop sides and tarpaulin. Offered Vehicle: - Aluminium tread plate floor - Shock absorbers, 100 km/h approval - Blue decor RAL5002 Technical Data: Permissible total weight: 1,000 kg Unladen weight without superstructure: 260 kg Payload: 740 kg Braked, single-axle Tyre size: 13 inch Internal platform dimensions: 250 x 151 x 10 cm Overall dimensions: 378 x 204 x 90 cm Features: V-drawbar with jockey wheel, galvanized Overrun brake with automatic reversing mechanism, 2 wheel chocks Fully enclosed phenolic resin floor Three-sided 100 mm aluminium side boards, each side with two sliding lashing eyes in profile rail Maintenance-free rubber suspension axle with independent suspension, branded tyres Chassis and axle galvanized Waterproof hubs 12V electrical system, 13-pin connector 2 stationary rails with loop brackets, 1 loading rail, galvanized, bent steel, length: 2,000 mm ! Many more trailers available at >>> trelex.de ! * Financing and trade-in possible! * Huge selection: Over 300 trailers always in stock – come and visit! * Competent and fair advice, fast processing. * Any questions? Just give us a call! ATTENTION: No immediate pickup possible without prior order!

Stanje: novo, skupna masa: 3.500 kg, dolžina tovornega prostora: 4.200 mm, Leto izdelave: 2026, Buy online at trailer-shop.de At ANHÄNGERWIRTZ, many models are available online Convenient online purchasing 24/7 Pick up yourself or have it delivered 😊 The online collection market for your new trailer offers strong brand models! Over 850 new trailers in stock Over 130 used trailers constantly available. Non-binding example: New Variant Machinery Transporter 3543 UX Maxi Load LED Tridem with Parabolic Suspension 3500kg Variant Multi-transporter 3543 UX 420x210x30cm 3500kg braked, Tridem flatbed with low chassis, parabolic suspension, 13" steel wheels in black, tilting platform with manual hydraulics, 30cm foldable aluminium side walls, continuous 90cm high ramp with lifting aid, rubberized DIN lashing rings on chassis edge, heavy-duty jockey wheel, modern LED lighting.... Invoice with VAT shown Guarantee - Trailer dealer for over 35 years Blodpfxsy Ivvws Al Hjg Sales and phone orders during our business hours Monday to Friday or around the clock via our online shop at trailer-shop.de Copyright - Trademark protection 05/26 VDK3543UX30BLACK

Stanje: novo, lastna masa: 260 kg, največja dovoljena obremenitev: 490 kg, skupna masa: 750 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 2.400 mm, širina tovornega prostora: 1.740 mm, skupna dolžina: 3.490 mm, skupna širina: 2.390 mm, vzmetenje: drugo, velikost pnevmatike: R13, zavoro prikolice: priklopnik brez zavor, Leto izdelave: 2025, Lorries MT-2 with Wind Deflector Motorcycle trailer for up to 2 large motorcycles or 1 motorcycle and 2 bicycles - One-off unit - Foldable/tiltable - Mechanically lowerable - Offer comes with steel rims (photo may differ!) – alloy wheels available at extra cost Technical data: · Permissible total weight: 750 kg · Unladen weight: approx. 260 kg · Payload: approx. 490 kg · Overall dimensions: 349 x 239 x 96 cm · Loading area length: 240 cm · Maximum loading area width: 174 cm · Tyres: R13 Features and construction: · Unbraked, single-axle · Maintenance-free rubber suspension axle · Trailer can be lowered via winch · Sturdy steel frame with cross beams, hot-dip galvanized and black powder-coated · Non-slip aluminium floor with drive-on ramp extension at the rear (photo may differ) · Rear floor folds down for easy storage of the trailer · 2 front-wheel chocks as standard · Various lashing rings · Jockey wheel · LED lighting Optional accessories: - Spare wheel with bracket - Alloy wheels (design on request, pictures may differ) - Bicycle rack - 100 km/h TÜV approval - Downrating - 100 km/h sign holder ! Many more trailers at >>> trelex.de ! * Financing and trade-in available! * Huge selection: Over 300 trailers always in stock – come visit! * Competent and fair advice, fast processing. * Questions? Just call! Bljdpfx Ajyhaylol Hog PLEASE NOTE: Immediate pickup is not possible without prior order!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 610 kg, največja dovoljena obremenitev: 1.890 kg, skupna masa: 2.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.000 mm, širina tovornega prostora: 1.450 mm, višina nakladalnega prostora: 180 mm, skupna dolžina: 4.650 mm, skupna širina: 2.050 mm, skupna višina: 2.110 mm, velikost pnevmatike: 195R14C, zavoro prikolice: prikolica s zavoro, Neptun MT 25-300-2 Construction Machine Transporter with Individual Ramps - NEW VEHICLE - Technical Data: Permissible total weight: 2,500 kg Axles: 2 Unladen weight approx. 610 kg Payload up to 1,890 kg Internal dimensions: 300 x 145 x 8-18 cm Overall dimensions: 465 x 205 x 211 cm Tyres: 195R14C Loading height approx. 50 cm Structure and Standard Equipment: Low-loader, twin-axle V-drawbar, frame, and slip-resistant steel mudguards welded and fully hot-dip galvanized 18 mm anti-slip phenolic plywood floor Lashing points with perforated side frame Maintenance-free rubber suspension axles Collision protection bars in front of wheel arches, both sides Automatic heavy-duty jockey wheel Aluminium individual ramps 160 x 35 cm, laterally adjustable Foldable rear supports with the ramps Multi-function rear lights, side markers, and additional front lights ! Many more trailers available at >>> trelex.de ! * Financing and trade-in available! * Huge selection: Over 300 trailers always in stock—visit us! Bljdsxuqf Dspfx Al Hog * Expert, honest advice and fast processing. * Questions? Just call us! ATTENTION: Immediate pickup not possible without prior order!

Stanje: rabljeno, Funkcionalnost: nefunkcionalno, lastna masa: 710 kg, največja dovoljena obremenitev: 790 kg, skupna masa: 1.500 kg, konfiguracija osi: 2 osi, prva registracija: 07/2020, naslednji pregled (TÜV): 08/2026, dolžina tovornega prostora: 3.100 mm, širina tovornega prostora: 1.300 mm, višina nakladalnega prostora: 2.300 mm, skupna dolžina: 4.490 mm, skupna širina: 1.830 mm, skupna višina: 2.730 mm, barva: črn, zavoro prikolice: prikolica s zavoro, The Champion Uno Esprit impresses with its robust aluminum side walls and the original Böckmann full aluminum floor. As an entry-level 1-horse trailer, it offers proven Böckmann added value, combining high quality with an attractive price. Aluminum side walls, full polyester roof, aluminum floor (with glued and sealed rubber mat on top), tack room with a saddle rack, plastic mudguards, automatic jockey wheel, 185/70 R13 tires, box bar system with hooks and chain, tilt windows on both sides. The trailer has some dents in the interior, which can optionally be covered with a side kick protection. Sale on behalf of a customer. VAT is not deductible. Subject to alterations and errors. ----- Bljdpfx Aloyituxs Heg As your Böckmann partner in Baden-Württemberg, we offer leading brands and reliable service – trust in over 25 years of experience. Trailer purchase is a matter of trust – buy from the professionals!