Prikolica za cisterno

Schmies.eu STS VR-1.5 Saugfass, Vakuumsaugfass

Stanje: skoraj kot novo (rabljeno), prevoženi kilometri: 70.000 km, Leto izdelave: 2023, Volvo FMX 510 8x4 letnik 2023, Euro 6, 70.000 km, zadnja prekucna kesonska nadgradnja, hidravlična stranica, ponjava za prekrivanje/odkrivanje. Za podrobnejše informacije smo vam na voljo po telefonu ali pri nas na sedežu. Iiedpfx Aoxvzf Rob Ujk

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 136.000 km, moč: 84 kW (114,21 KM), prva registracija: 06/2017, vrsta goriva: dizel, lastna masa: 2.000 kg, največja dovoljena obremenitev: 1.200 kg, skupna masa: 3.190 kg, velikost pnevmatike: 205/75 R 16, konfiguracija osi: 2 osi, medosna razdalja: 3.665 mm, barva: bela, voznikova kabina: dnevna kabina, vrsta prenosa: mehanski, emisijski razred: Euro 6, vzmetenje: jeklo, število sedežev: 3, dolžina tovornega prostora: 3.500 mm, širina tovornega prostora: 2.050 mm, Leto izdelave: 2017, obratovalna teža: 3.190 kg, število prejšnjih lastnikov: 1, Oprema: ABS, airbag, centralno zaklepanje, hladilna enota, klimatska naprava, računalnik na krovu, servovolan, MERCEDES BENZ 311 FITTED WITH FIXED DROPSIDE BODY, MECHANICALLY AND BODILY IN VERY GOOD CONDITION Iijdjwzmmtspfx Ab Ujk

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 200.000 km, moč: 309 kW (420,12 KM), prva registracija: 04/2005, vrsta goriva: dizel, lastna masa: 11.341 kg, največja dovoljena obremenitev: 14.659 kg, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2005, obratovalna teža: 26.000 kg, Oprema: dvižna zadnja plošča, klimatska naprava, računalnik na krovu, spojka prikolice, spojler, VOLVO FM 12 420 Year of manufacture: 2005 Mileage: 20,000 km Air conditioning Iodpfxowg R Tzs Ab Uoik 6x4 Leaf suspension front and rear

Stanje: novo, Leto izdelave: 2025, kapaciteta rezervoarja za gorivo: 2.000 l, ALTRO-Tec GmbH supplies the right vacuum suction system for any application! M-VAC 2000l / 2.0 m³ - 2.0 m³ hot-dip galvanized tank - Fully galvanized 3.5t chassis - Lid for opening the drum - Tank can be emptied by switching the compressor - Compact, maneuverable vehicle – ideal for urban use, parking garages, etc. - Suitable accessories for various applications available - Suction depths up to 6 meters possible - 3600 liters air capacity - Various drive options: petrol, diesel, electric Application examples: - Suction of heavily sandy drilling muds in specialist foundation engineering - Suction of liquids, including those containing solids - Cleaning of channels, shafts, pits - Emptying of mobile toilets and shafts Iiedpfsu Ianvex Ab Ujk - Suction of alkalis, emulsions, and wastewater - Large selection of accessories - Custom paintwork in customer color available (special equipment) With ALTRO-Tec GmbH, you get everything from a single source: - On-site demonstration and instruction at your construction site - Repair and maintenance - Fast spare parts supply - Assistance with troubleshooting - Bodywork of all kinds: Multi Car, hook lift system, and much more! - Custom constructions / special filters - Rental equipment and trade-ins delivery worldwide Images are sample pictures. For current images, please contact us at: 02723 717 611-0 or by email: info(at)altro-tec.de

Stanje: rabljeno, Leto izdelave: 2025, · 1.5 m³ hot-dip galvanized container Iiodpfet N U S Rox Ab Uek · Fully galvanized 2.7 t chassis · Lid opens completely · Quick emptying of the container by switching the compressor from suction to pressure mode · Compact, maneuverable trailer, ideal for cities, parking garages, etc. · Suction depths up to 6 meters possible · Standard air performance: 3,600 L/min; performance upgrade or continuous duty version available · Various drive types: petrol, diesel, electric · Suitable accessories for various applications available, including: - Hose reel, high-pressure cleaner, floor suction nozzle, suction lance, side advertising panels on the upper hose supports, workstation lighting, rotary beacon, custom paint finish Application examples: · Suction of highly sandy drilling muds in special civil engineering · Suction of liquids with solids · Cleaning of sewers, shafts, pits · Emptying of mobile toilets and shafts · Suction of lye, emulsions, and waste water At ALTRO-Tec GmbH you get everything from a single source: · Demonstration and instruction at your construction site · Repair and maintenance · Fast spare parts supply · Support with troubleshooting and repairs · Any type of superstructure: Multi Car, hook system, and much more! · Custom builds / special filters and rental equipment · Trade-in possible delivery worldwide Images are sample images; for up-to-date information, please contact us: 02723 717 611-0 or by mail: info(ât)altro-tec.de

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 122.085 km, prva registracija: 03/2016, vrsta goriva: dizel, konfiguracija osi: 8x4, medosna razdalja: 4.600 mm, gorivo: dizel, zavore: zaviranje z motorjem, barva: oranžna, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, Leto izdelave: 2016, Oprema: ABS, filter saj, klimatska naprava, navigacijski sistem, spojler, tempomat, = Additional Options and Accessories = - Aluminium fuel tank - Brake booster - Dual fuel tank - Electric windows - Electrically adjustable exterior mirrors - Speed limiter - Refrigerator - Air suspension - Air horn - Fog lights - Particulate filter - Reversing camera - Sun visor - Stability control - Toolbox - Power take-off (PTO) - Central lubrication system - Central locking = Further Information = Technical Details Number of cylinders: 6 Engine displacement: 12,777 cc Unladen weight: 29,420 kg Driveline Fuel tank capacity: 500 litres Transmission Transmission: I-SHIFT, automatic Axle Configuration Front axle: Steered Rear axle 1: Twin tires Rear axle 2: Twin tires Rear axle 3: Lift axle; steered Functional Body manufacturer: MTS DINO 5 4A 14T 36000V Condition Technical condition: very good Visual condition: very good Financial Information Price: On request VOLVO FMX 8X4 TRIDEM MTS DINO 5 SUCTION EXCAVATOR EURO 6 L PACKAGE 510 HP DRIVE 8X4 TRIDEM LAST AXLE LIFT AND STEERABLE WHEELBASE 460 CM AIR SUSPENSION LARGE FMX CAB WITH AIR CONDITIONING, CAMERA, NAVIGATION, REFRIGERATOR DIFFERENTIAL LOCK AUTOMATIC TRANSMISSION MTS DINO 5 SUCTION EXCAVATOR TYPE 4A14 T 36,000 V TWIN TURBINES!!! HYDROSTATIC DRIVE WITH REMOTE CONTROL POWER BOOM WITH ROTATION HEAD CENTRAL LUBRICATION 2X REMOTE CONTROL ADDITIONAL HIGH PRESSURE PUMP UNIT WITH HOSES AND GUN EXTRA AIR VALVES AT THE REAR OF THE TRUCK TO OPERATE PNEUMATIC TOOLS SUCH AS HAMMERS COMPRESSOR 4041 HOURS FAN 4041 HOURS ALL AVAILABLE MANUALS Iijdpouxrvasfx Ab Uek FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 350.000 km, moč: 397,17 kW (540,00 KM), prva registracija: 05/2017, vrsta goriva: dizel, skupna masa: 33.000 kg, konfiguracija osi: 6x4, medosna razdalja: 3.900 mm, gorivo: dizel, zavore: retarder, barva: modra, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, vzmetenje: jeklo, Leto izdelave: 2017, Oprema: ABS, hidravlika, klimatska naprava, navigacijski sistem, retarder, spojka prikolice, tempomat, zapora diferenciala, For sale: our well-maintained roll-off tipper. 6x4, good condition, regularly serviced. Equipped with rear hydraulics for low-loader or crane containers. Hook position hydraulically adjustable. Isdpfx Asv Hm Dqsb Ujik

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 1.250 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, prostornina tovornega prostora: 2 m³, Leto izdelave: 2025, Standard Equipment Basic Vacuum Suction Tank STS V-2.0 with 20m/2" Suction Hose Reel + MEC 5000 Tank • Tank capacity: 2,000 litres • Tank hot-dip galvanized • Tank slightly inclined to the rear for better cleaning • Lateral cleaning port on the tank for cleaning out blockages or impurities without opening the tank lid • Tank lid opens fully to the passenger side and is secured with hook bolts • Two integrated safety levels to prevent compressor damage as standard • Siphon separator • Overflow with two balls and sight glass • Vacuum gauge on the suction unit with protective guard • Mechanical fill level indicator with colour scale Engine and Compressor • MEC 5000 vacuum compressor with 5,200 l/min air capacity • Maximum vacuum: -0.8 bar (continuous operation at -0.5 bar) • Maximum overpressure: 0.49 bar • Maintenance-free V-belt drive for vacuum compressor • B&S Vanguard 18 HP industrial engine • Electric starter, oil sensor, control panel with ignition lock, battery and fuel tank • Internal intake hose to prevent damage within the engine unit • Silencer for vacuum compressor with oil trap • Stainless steel heat deflector above exhaust • 1 litre biodegradable compressor oil stored in oil bottle holder • 5l petrol can in holder • Standard: long-neck funnel for engine oil changes and refilling • All engine components and accessories are housed in a lockable engine compartment Chassis • Self-supporting chassis, fully hot-dip galvanized • Low-loader tandem chassis 3.5t • Track width identical to passenger cars and Sprinters for optimized driving • Lowest possible centre of gravity for the suction tank • 2 axles with 1,750kg load capacity each and independent suspension by a reputable manufacturer • Continuous welded V-drawbar • Sturdy wheel arches with metal lamp housings • Stake holders for quick securing of suction hoses with rubber bands • Storage options for tools and accessories between engine enclosure and suction tank • Overrun brake with automatic reverse (Rückmatic) • Automatically locking ball coupling • Reinforced jockey wheel • 13-pin electrical connector Connections and Hoses • 2x suction hoses (3”) 5m long with Perrot couplings • 1x suction lance 3” (1,500mm long) • 1x Perrot connector (3”) at bottom of tank lid • 1x Perrot connector (3”) side-mounted, facing right in direction of travel If you are looking for something different than this unit, do not hesitate to contact us directly. Our in-house vehicle construction can meet almost any requirement. Iodpfou Rpfcex Ab Ujik For further details and/or photos, please contact us directly. You can find a wide selection of other vehicles for SALE or RENT at: Subject to change, prior sale and errors excepted. The buyer is obliged to verify the condition and equipment of the goods independently. Sale exclusively according to our terms and conditions and with exclusion of any warranty.

Stanje: novo, prostornina tovornega prostora: 1,8 m³, Leto izdelave: 2025, Description M-VAC 1800 l / 1.8 m³ • Year of manufacture: 2025 • 1.8 m³ hot-dip galvanized tank • Fully galvanized 3.5 tonne chassis • Tiltable tank for quick emptying and cleaning • Tank tilting via 12-volt hydraulic system • 12-volt electric start (engine with alternator) • Lid can be opened completely • By switching the compressor from "suction" to "blowing", the tank can be emptied quickly • Compact, manoeuvrable trailer, ideal for urban areas, parking garages, etc. • Suction depths up to 6 meters possible • Standard air output 3,600 L/min, performance upgrade or continuous operation version available • Various drive types: petrol, diesel, electric • Suitable accessories for various applications available, including: Hose reel, high-pressure cleaner, floor suction nozzle, suction lance, side advertising panels on upper hose holders, workplace lighting, rotating beacon, paint finish in your chosen color, height-adjustable tow bar, eccentric fasteners Examples of use: • Extraction of highly sandy drilling slurries in specialist foundation engineering • Extraction of liquids, including those with solids • Cleaning of channels, shafts, pits • Emptying of portable toilets and shafts • Suction of lyes, emulsions, and wastewater With ALTRO-Tec GmbH, you get everything from a single source: • Demonstration and instruction at your construction site • Repair and maintenance • Fast spare parts supply • Assistance in case of problems and repairs • Body assemblies of all kinds: Multi Car, hook-lift systems, and much more! • Custom builds / special filters and rental units • Trade-in possible Delivery worldwide For technical data and further information, please contact us. Iiodpfou Iaqqjx Ab Uok *Custom builds and special equipment* available on request, please contact us. Images are sample images Contact: ALTRO-Tec GmbH +49 2723 717 611-0 or by email: info(ât)altro-tec.de Please note that we can only process your inquiry if you provide your name and contact details such as your telephone number or email address.

Stanje: novo, največja dovoljena obremenitev: 37.820 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment. Complete specification available on request. Gooseneck: - Gooseneck with front corners beveled approx. 45° and rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring approx. 30 mm thick Loading Platform: - 1 pair of fixed wheel recesses in front of the axles, approx. 2,610 x 970 x 400 mm (L x W x D) - Wheel recesses with square climbing stripes approx. 15 x 15 mm, including widenings at the bottom - Between the 1st and 2nd axles, one fixed pair of wheel recesses approx. 1,610 x 700 x 400 mm (L x W x D) - Incl. 3-part removable galvanized covers over the wheel recesses (W approx. 670 mm), max. point load approx. 5 t/piece - Recess in the bevel and extending into the loading platform for accommodating excavator stick (approx. 2,900 x 750 x 210/290 mm (L x W x H)) - 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) - 5 pairs of folding-out lashing rings (LC 5,000 daN) - 3 pairs of folding-out lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) - Cut-outs in the outer frame of the platform for attaching tension belts (LC 2,000 daN) One-Piece Steel Ramps: Iiedpfxsw Tpqws Ab Uok - 1 pair of galvanized one-piece steel ramps, approx. 3,000 x 800 mm, with approx. 48 mm thick hardwood covering - Ramp with hydraulic lifting system, hydraulically adjustable - Maximum load per pair: 40,000 kg - In accordance with Regulation 1230/2012/EU, ramps shorter than 300 mm do not need to be considered in the vehicle length in transport position Landing Gear: - JOST landing gears (mechanical) with 2-speed gearbox for approx. 24 t lift capacity (approx. 50 t test load) Axles: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load per axle: 12,000 kg - Electro-magnetic reverse lockout, activated via reverse gear and manually - Air suspension with raise/lower valve - Axle tool Tyres: - Tyres 235/75 R 17.5 3PMSF, brand of our choice - TPMS tyre monitoring system as per ECE R 141. Data transmission to the tractor unit via the standardized EBS interface according to ISO 11992. To display correctly, the tractor unit must be able to receive and show this data. Brake System: - WABCO brake system in compliance with EU regulations, with EBS-E (2S2M) without connecting lines to the tractor unit Steel Construction: - Steel structure made from high-tensile fine-grained steels - Steel grades: S355J2+N/S355MC (yield strength 355MPa); S690QL/S700MC (yield strength 690MPa) Electrical System: - Electrical system in accordance with EU regulations - 24 Volt lighting ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX at the front terminal bar with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: - Complete steel structure automatically shot blasted with a turbine blasting system after welding - Second blasting process with corundum for optimum coating adhesion - HRM metallization of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) for optimal corrosion protection - Final paint with two layers of 2K topcoat, single color in RAL 3002 Carmine Red, according to the RAL 841GL system - Rims in silver - Rear section metallized and in RAL 9010 (con...