Polpriklopnik s premičnim dnom

KNAPEN K100 SCHUBBODEN, NEUFAHRZEUG, 10MM BODEN, LIFTACHSE, FUNK

Stanje: novo, največja dovoljena obremenitev: 28.320 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.750 mm, prostornina tovornega prostora: 92 m³, Oprema: ABS, Chassis: Design with continuous frame, newly manufactured in self-supporting aluminum construction with appropriate reinforcements in the lower flange for particularly high stability and strength, crossmembers with a height of 140 mm in reinforced design (for high ground load), additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure. Axles and Suspension: Disc brakes 22.5, Jost (DCA) axle assemblies, 3x9 ton capacity with DCA air suspension, raise/lower function, Wabco Smartboard Info Center, electronic brake wear indicator (BVA, can be read out in the tractor unit display), first axle with start-assist function (new EC regulation, without tractor unit equipment), (first and third axle liftable on request at extra cost). Hsdpfxjfi Nmwe Adhjfb Tyres and Wheels: 6 wheels with tires size 385/65 R 22.5 of manufacturer’s choice (Br-Go-Co) on silver-painted steel rims, 11.75x22.5 ET 120. Kingpin: 2-inch, bolted into a 10 mm thick mounting plate. Landing Gear: Mechanical landing legs with two speeds, 2x 20-ton support capacity with swivel foot. Brake System: According to E.C. regulations, EBS electronic braking system by Wabco with RSS (Roll Stability Support) and premium modulator, spring-type parking brake on two axles operated from the rear, ALU air reservoir system. Electrical System: In accordance with EC Directive 91/633 and 97/28, with 2 five-chamber lamps (Aspöck Europoint) integrated into the ALU rear end, 24-volt system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 reflective warning plates at the rear, position lights at the front (2x white), rear (2x red), 2 separate halogen reversing lights integrated into underrun protection. Body/Tipper Body: Fully welded interior, reinforced side walls, front wall load 17,250 daN, side and rear walls 13,400/10,400 daN. Aluminum tipper body, side walls made from 30 mm thick aluminum plank profiles (2–3 mm), 600 mm wide, completely welded with lower and upper flange, inside profile joints fully welded; floor as walking floor system laid on 140 mm aluminum crossmembers, floor forklift load approx. 9t/m², crossmembers spaced closely (approx. 350 mm), special angled aluminum corner profiles, flat straight rear wall with 2 aluminum swing doors (50/30 mm thick) with 2 locking rods, fixed into the welded ALU rear frame with Teflon and stainless steel bearings; doors secured when open by a chain at each side; hard wear plates welded to side walls, approx. 2000x1500x4 mm; moving residual discharge wall with Kevlar tarp approx. 1800 mm long plus lateral brushes and Kevlar side-sealing; service door in front wall with interior-folding ladder. Hydraulic System: Walking floor system in the floor with hydraulically operated ALU profiles on ALU square sections with approx. 880 PE-HD gliders plus anti-lifting slide bearings, Type CF 10 mm floor design, hydraulics with approx. 200 mm working stroke, fixed halves at the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and type to be specified, operating pressure 190–max. 240 bar, ALU end caps welded into walking floor, electric controls on left rear with remote control in a lockable waterproof box, hydraulic hoses not included. Accessories: 6 PVC mudguards with 2 antispray mud flaps, 6 PVC splash guards above the wheels, 1 ALU spare wheel holder, side ALU underrun protection

Stanje: rabljeno, največja dovoljena obremenitev: 35.000 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2024, naslednji pregled (TÜV): 04/2026, dolžina tovornega prostora: 12.213 mm, širina tovornega prostora: 2.475 mm, višina nakladalnega prostora: 2.300 mm, prostornina tovornega prostora: 70 m³, skupna širina: 2.550 mm, skupna višina: 3.856 mm, Leto izdelave: 2024, Oprema: ABS, STAS 3-Axle AGRICULTURAL Walking Floor Semi-Trailer, 70 cbm First registration 05/2024, in like-new condition Internal dimensions (LxWxH): 12,213 x 2,475 x 2,300 mm Volume: approx. 70 cbm Unladen weight: only 7,010 kg Fifth wheel height: approx. 1,250 - 1,300 mm Total height: approx. 3,850 mm Short aluminium chassis over the axles SAF axles with large disc brakes, 430 mm, heavy-duty "Off-Road" version Wabco trailer EBS with RSS stability system 1st axle: LIFT AXLE 3rd axle: Steering axle Tyres: 6 x 385/65 R 22.5 ALU drop-leg supports, full load (2x 10 t.) 4x LED work lights Cargofloor moving floor, agricultural version with 15 boards, 6 mm smooth Aluminium end caps, welded Hfedsv Dz Ixspfx Adhjb RADIO remote control Side wall panels fully welded (grain version) Rear portal cross member, top section swivels Hydraulic connections at top and additionally at the bottom of the landing legs Roof crossmembers, reinforced, galvanised Integrated grain discharge hopper at rear, outlet opening facing downwards, operated from the side RENTING is the new BUYING – also available from us with full-service rental.

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.650 mm, prostornina tovornega prostora: 93 m³, Chassis Design with reinforced continuous chassis, newly constructed bodywork in a self-supporting design with corresponding reinforcements in the lower belt for particularly high stability and strength. Cross members: reinforced version, 140 mm high (for heavy ground loads). Additional reinforcement as gusset plates in the front lower belt/vehicle frame area. Chassis made of galvanized steel up to the support structure (trailer design max. 39,000 kg). Axles and Suspension: 'Disc brake 22.5' Jost (DCA) axle units, 3x9 tons with DCA air suspension, lift and lower function, Wabco Smartboard info center, electronic brake wear indicator (BVA readable on the tractor unit display), 1st axle with traction aid (new EU regulation, without tractor unit equipment), (optionally 1st + 3rd axle can be liftable). Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 from selected manufacturers (Br-Go-Co) on silver steel rims, 11.75 x 22.5 ET 120. Landing Legs Mechanical landing legs with two speeds, 2x 20 t support load with swiveling foot. Braking System In accordance with EC standard – EBS electronic system by Wabco with RSS (Roll Stability Support) and premium modulator. Spring-loaded brake system acting on two axles with control at the rear. ALU air-tank system. Electrical System According to EC directives 91/633 and 97/28 with two Aspöck Europoint 3 five-chamber lamps integrated into the ALU rear closure, 24V system with 1x 15-pin and 2x 7-pin sockets, LED side marker lamps, two reflective plates on the rear, position lights front 2x white, rear 2x red, two separate LED reverse lights integrated into underrun protection. Body/Tipping Body – Fully Welded Inner Structure Reinforced side walls: front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn. Aluminium tipping body: side walls 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with lower and upper belts. Plank profiles inside fully welded. Floor with moving floor system laid on 140 mm ALU cross-members. Floor load capacity approx. 9 t/m2, cross-members closely spaced (approx. 350 mm). ALU front wall with 600 mm plank profile, 2-3mm thick, straight design. Special ALU corner profiles in chamfered design. Smooth rear wall in straight version with two ALU swing doors, 50/30 mm thick, with 2 bar locks mounted in welded ALU rear frame, with Teflon and stainless steel bearings. Doors secured when opened with one chain each side. Hard-wearing wear plates on side walls approx. 2,000x1,500x4 mm, fully welded. Residual discharge wall with Kevlar tarpaulin approx. 1,800 mm length plus side Kevlar seal. Service door in front wall with inward-turning ladder. Hydraulic System “Cargo Floor” Moving Floor System Moving floor system in the floor with hydraulically operated ALU profiles on ALU box beams, approx. 880 PE-HD slides plus anti-lifting slide bearings. Type CF, 10 mm floor version, hydraulics with approx. 200 mm stroke. Fixed halves at the front wall, separate option for connecting hydraulic line under the vehicle with fixed halves, pipe size NW 21, fixed halves with size and type to be specified. Operating pressure 190–max. 240 bar, ALU end pieces welded into the moving floor. Electric operation on the rear left with radio control integrated into a lockable, waterproof box, without hydraulic hoses. Hfsdpfx Adsgcw Rmehjb Accessories 6 PVC mudguards with 2 anti-spray mud flaps, 6 PVC splash guards above the wheels, 1 ALU spare wheel holder, side ALU underrun protection.

Stanje: novo, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.750 mm, prostornina tovornega prostora: 92 m³, Oprema: ABS, - Panama sheet 900g - 10 mm floor - V-sheets 2000x1500x4 - Service door in the bulkhead - 12 pairs of lashing rings in the bulkhead Chassis: Reinforced continuous frame design, new body manufactured in self-supporting construction with corresponding reinforcements in the lower flange for exceptionally high stability and strength, crossmembers 140 mm high in reinforced version Axle and Suspension: Disc brakes 22.5"? Jost axle assemblies, 3 x 9 tons with DCA air suspension, lift and lower function, Wabco Smartboard, electronic brake pad wear indicator (BVA), 1st axle with traction aid (without tractor unit configuration) Hjdofi Nmpjpfx Adhsfb Tyres and Wheels: 6 wheels with premium tyres size 385/65 R 22.5 on steel rims, 11.75 x 22.5 ET 120 Landing Gear: Mechanical landing legs, 2 x 20 t support load Brake System: Wabco EBS E-system with RSS (Roll Stability Support) and premium modulator, spring-actuated parking brake on two axles, operated from the rear Electrical System: In accordance with EU directive 91/633 and 97/28, with two five-chamber lights Aspöck Europoint type integrated in ALU rear, 24 Volt system with 1 x 15-pin and 2 x 7-pin sockets, with side marker lights (LED), 2 separate LED reversing lights integrated in underrun protection Body / Tipper Body: Fully welded interior, reinforced side walls. Aluminium tipper body, side walls 30 mm thick aluminium plank profiles (2–3 mm), 600 mm high, fully welded with top and bottom rails, plank profiles fully welded inside, alu bulkhead with 600 mm plank profile, 2–3 mm thick, straight design, with 2 ALU swing doors 50/30 mm thick, movable residual discharge partition with Kevlar sheet, approx. 1,500 mm long plus side Kevlar tarpaulin seal Hydraulics: 'Cargo Floor' moving floor system, hydraulically operated aluminium floor profiles laid on alu square profiles, with approx. 880 PE-HD sliders, type CF, 8 mm floor, fixed ends at bulkhead, separate option to connect hydraulic line under vehicle with fixed ends, operating pressure 190 – max. 240 bar, ALU end caps welded in moving floor, without hydraulic hoses Accessories: 6 PVC mudguards with 2 anti-spray flaps, 1 ALU E-wheel holder, side alu underrun protection, foldable, 1 tool box approx. 860 x 460 x 400 mm in plastic, 3.7m aluminium ladder, roll tarp approx. 660g/m² with roll tarpaulin system incl. roller bar, either with side tension belts or with quick fastener, catwalk on bulkhead with access ladder, 3 steel bows with swing-out and lockable latches, alu protective cover with hinges foldable for lights, etc. +€590 delivery costs Unladen weight: approx. 7,700 kg Offer and pictures subject to confirmation

Stanje: rabljeno, prevoženi kilometri: 5.200 km, moč: 90 kW (122,37 KM), vrsta prenosa: samodejen, vrsta goriva: dizel, barva: zelen, skupna masa: 8.500 kg, lastna masa: 5 kg, največja dovoljena obremenitev: 2.900 kg, dvižna višina: 6.150.000 mm, število sedežev: 1, prva registracija: 01/2016, obratovalne ure: 5.200 h, skupna višina: 46.800 mm, voznikova kabina: drugo, medosna razdalja: 2.850 mm, Boom 6 m, new and as-new tires, various hydraulic connections renewed, lifting capacity 3,500 kg, comes with pallet forks and bucket, engine power 90 kW, 3.621 m³, wheelbase 2,850 mm, load capacity at max. outreach 1.35 t, fully functional, permissible total weight 8,500 kg. Hfsdpfjvikp Nex Adheb Note Despite careful review of all our price listings, errors may still occur. Partially, these are caused by data transmission errors within the systems of various platform providers. Errors on our part also cannot be completely ruled out. Therefore, please note that all information is provided without guarantee and does not constitute a legal claim. Price labels also cannot be considered contractual components. If you particularly value a specific feature of our listing, please inform us at the time of contract conclusion. Thank you for your understanding!

Stanje: rabljeno, Leto izdelave: 2022, obratovalne ure: 291 h, nosilnost: 2.500 kg, dvižna višina: 4.700 mm, vrsta goriva: dizel, tip droga: triplex, gradbena višina: 2.130 mm, stanje pnevmatik: 100 odstotek, barva: drugo, Priključki: bočni pomik; Posebna oprema: 3. ventil, 4. ventil, delovne luči zadaj, delovne luči spredaj, strešna prevleka, Hedpfeu Supvox Adhjfb

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 7.900 kg, največja dovoljena obremenitev: 31.100 kg, skupna masa: 44.000 kg, konfiguracija osi: 3 osi, prostornina tovornega prostora: 92 m³, stanje pnevmatik: 100 odstotek, Leto izdelave: 2025, obratovalna teža: 39.000 kg, Oprema: ABS, Novo polpriklopnik s premičnim podom Legras FMA 92 m3 Podvozje s samonosno nadgradnjo ali celoten okvir od čela do vrat Preme SAF Intradisc+ CD, aluminijasta platišča, premijske pnevmatike 1. os dvignjena, 3. samousmerjevalna Pod Legras FMA Tip 10QUALIMAT, hidravlična enota Cargo Floor, radijsko upravljanje Stene 3/2 mm, zadnja vrata s 4 zapirali Pokritje z ročno ponjavo, hodnik z dvojnimi stopnicami Hfodpouc Sw Nofx Adhsb Popolna LED Shapeline razsvetljava, 4x delovne luči Omarica, rezervoar za vodo, EBS računalnik in standardna oprema Na voljo več modelov

Stanje: rabljeno, lastna masa: 7.840 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2019, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.900 mm, prostornina tovornega prostora: 97 m³, vzmetenje: zrak, velikost pnevmatike: 385/55 R22,5, medosna razdalja: 1.310 mm, barva: srebrn, Oprema: ABS, drum brake EBS (electronic braking system) payload 34,160 kg rolling tarp Hfjdpfxowiw T To Adheb platform BPW axles lifting and lowering device errors excepted

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: XPNK0C200LD065238, lastna masa: 7.410 kg, največja dovoljena obremenitev: 28.590 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2020, naslednji pregled (TÜV): 04/2026, dolžina tovornega prostora: 13.520 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 4.000 mm, prostornina tovornega prostora: 90 m³, vzmetenje: zrak, velikost pnevmatike: 385/65/22,5, barva: siv, Leto izdelave: 2020, Oprema: ABS, Knapen semi-trailer (standard walking floor) with valid inspection certificate for sale. Multiple trailers available upon request. Hedpfx Adjxl Ua Tshsfb

Stanje: rabljeno, Leto izdelave: 2023, obratovalne ure: 2 h, Wacker Neuson WL25 Wheel Loader Basic Edition Operating weight: 2,520 kg Tyres: 10-16.5 Engine: Perkins Power: 18.4 kW / 25 HP Compact axle T94 Lighting according to StVZO Reverse warning system Travel speed: 20 km/h Folding driver’s canopy, EPS Hsdpfx Adou A Nkpehjfb 3rd hydraulic circuit at the front incl. single detent, operated via lever Adjustable steering column Cast rear counterweight Self-recovery device pin Work lights: 2 front, 2 rear Fuel tank capacity: 45 l Weidemann SWP hydraulic interface Accessories: - Pallet fork 1200 mm - Earth bucket 1400 mm RZ, 0.44 m³ - Data confirmation (ABE) - EC Declaration of Conformity