Kolesni nakladalnik

KOMATSU Radlader WA 80 - 6 Radlader

Stanje: rabljeno, Leto izdelave: 2015, obratovalne ure: 2.021 h, Informacije v nemščini Itsdox Dg E Eopfx Ab Uer Dodatne možnosti in oprema * 3. hidravlični krog * Nosilne vilice Opombe Leto izdelave 2015, 2021 h, skupna teža 6125 kg, hidravlični hitri menjalnik, paletne vilice, žlica, 3. krmilni krog, delovni reflektorji, moč motorja 50 kW Neto cena: 26.000 EUR, DDV 19 %, bruto cena: 30.940 EUR Pridržujemo si pravico do napak in vmesne prodaje! Dodatne informacije Vrsta goriva: Dizel Moč: 50 kW (68 KM) Za več informacij se obrnite na Philip Müller , , p-).

Stanje: rabljeno, Leto izdelave: 2010, obratovalne ure: 5.000 h, Oprema: jeklene gosenice,

Stanje: rabljeno, moč: 50 kW (67,98 KM), vrsta prenosa: drugo, vrsta goriva: dizel, barva: rumena, skupna masa: 6.125 kg, obratovalna teža: 6.125 kg, konfiguracija osi: 2 osi, število sedežev: 1, emisijski razred: noben, vzmetenje: drugo, obratovalne ure: 3.004 h, voznikova kabina: drugo, Oprema: pogon na vsa štiri kolesa, Dizel, osnovna barva: rumena, brez klimatske naprave Ijdpfx Abovhtb Se Ujtr Dodatna oprema: Pogon na vsa kolesa, hitra menjava orodij Tip nadgradnje: Komatsu nakladalec na kolesih WA 80 - 6, letnik 2015, delovnih ur 3.004 h, vilice za palete in standardna žlica, radio CD, vzmeten sedež, pnevmatike napolnjene s peno

Stanje: rabljeno, Leto izdelave: 2007, obratovalne ure: 4.500 h, Oprema: pogon na vsa štiri kolesa, * Prodaja samo za izvoz/trgovino * električne težave Iodswwzx Aopfx Ab Uotr Pridržujemo si pravico do napak in predčasne prodaje Ogled možen samo po dogovoru Na povpraševanja prek WhatsApp ne odgovarjamo

Stanje: rabljeno, Leto izdelave: 2006, obratovalne ure: 9.237 h, Oprema: pogon na vsa štiri kolesa, Equipment: * Year of manufacture: 2006 * Operating hours: 9,236 h * Power: 157 kW / 213 hp * Weight: 19.8 t * Tyres: Michelin 23.5-25X Type A, approx. 60% tread remaining * Rear-view camera * Steering wheel control * Air conditioning * Tow pin * Central lubrication system * Suspension seat * Radio pre-installation Other information: * 1 previous owner * German machine * CAT service book maintained * Last service at 9,003 h * Signs of use * Rust present Since 1972, your reliable partner for automotive and commercial vehicles in 28832 Achim, near the Bremer Kreuz. NutzfahrzeugZentrum Behnke constantly stocks approx. 200 vehicles including vans, commercial vehicles, and construction machinery! We continuously offer attractive financing options at special rates. Upon request, we gladly provide a tailored offer! Trade-in of your commercial vehicle/construction machinery welcome. If a new TÜV inspection is required, we are happy to provide an offer from our partner workshops. Our offer is generally WITHOUT new TÜV inspection. Delivery of your "new" commercial vehicle can be arranged through our external partners for an additional charge. Itsdpfx Aou D Uvyob Uor The details given in advertisements, on the internet, price tags, and images are non-binding descriptions and do not constitute guaranteed properties. The seller assumes no liability/warranty for typing or data transmission errors. Listed equipment must be verified separately if necessary. Subject to prior sale and errors.

Stanje: rabljeno, velikost pnevmatike: -, Leto izdelave: 2020, obratovalne ure: 180 h, Oprema: kabina, Ref: 7916 JCB 8035 ZTS Mini Excavator, Year: 2020, 180 operating hours, Itjdpfx Asv I Eizeb Uor 5 buckets including 1 tilting bucket (1.40 m wide) + 1 trenching bucket (35 cm wide) Operating weight: 3,500 kg

Stanje: rabljeno, Leto izdelave: 2002, obratovalne ure: 11.800 h, številka stroja/vozila: NEW-12,

Stanje: rabljeno, Leto izdelave: 2017, obratovalne ure: 11.315 h, Crawler loader with approx. 2.2 m³ 4+1 bucket, bucket with bolt-on mesh extension, front cab guard, 560 mm track plates, operating hours: 11,315, fire suppression system, rear-view camera, air conditioning. Vehicle may have advertising decals and/or lettering applied. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we will be happy to provide an offer together with our partner workshops! Vehicle may have advertising decals and/or lettering applied. Our general terms and conditions of delivery and payment apply. Isdpfx Absu Eabko Uetr We are also happy to provide you with a financing or leasing offer for this unit. Please contact us!

Stanje: novo, lastna masa: 13.250 kg, največja dovoljena obremenitev: 47.550 kg, skupna masa: 60.800 kg, konfiguracija osi: 3 osi, vzmetenje: zrak, velikost pnevmatike: 245/70 r17.5, barva: siv, Oprema: ABS, Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10°. 3 pairs of lashing rings 30 mm thick hardwood flooring Extendable loading platform: Loading platform in extendable design with rear chamfer approx. 1,000 mm x 8° 5 pairs of outward-folding lashing rings 3 pairs of outward-folding lashing rings 1 pair of flat lashing rings at the front of the loading area Cut-outs in the outer frame of the loading area for inserting tension straps Hardwood flooring approx. 48 mm thick, checker plate covering above the axles Two-part steel ramps: One pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering. Iedel Uxdkjpfx Ab Uotr Ramp with hydraulically folding and unfolding parts, hydraulic lifting system, and hydraulically adjustable position. Maximum load per pair: 40,000 kg Landing legs: JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and tires: BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically forced-steered Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tool Tires 245/70 R 17.5 Braking system: Braking system according to EU regulations with EBS-E (4S3M) without connecting lines to tractor unit Steel construction: Steel construction made from high-strength fine-grain steels Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Paintwork: First-class and long-lasting corrosion protection of the standard shot-blasted welded frame, guaranteed by a two-component (2K) zinc dust primer High-quality one-color two-component (2K) top coat in Novagrau Rear section metallized and painted in RAL 9010 (pure white) Metallic paint not possible Electrical system: Electrical system according to EU regulations, lighting 24 volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets Connections conforming to ISO 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories included: 2" kingpin One galvanized steel headboard approx. 400 mm high At the galvanized front connection strip, yellow-red air couplings 4 wheel chocks with holders at the headboard One spare wheel with holder in front of the headboard Electro-hydraulic power unit Rear and front remote steering via cable remote control with push-buttons, with single-track control of the axles Bracket at rear of gooseneck for ALU drive-on ramps European reflector signs (red-yellow) at trailer rear White reflective tape according to EU regulations at the sides, at the extension, and red at the rear At the gooseneck and on the ramps left and right, each with a holder for warning signs including socket One holder for beacon at trailer rear Galvanized folding supports under the loading platform chamfer Ramp operating valves fitted on the right side of the trailer Cover plates to bridge the gap between ramps and loading platform One mudflap at trailer rear Manual and description on USB stick Central lubrication system BEKAMAX (Pico) with general-purpose grease NLGI-2 and removable pump guard On the gooseneck, plug-in ALU side and rear walls approx. 2,440 x 400 mm The rear galvanized stakes are removable, superstructure length approx. 2,560 mm One INOX toolbox 1,350 x 400 x 400 on the gooseneck, box covers oil filler cap 4 pairs of WADER container pockets in the loading area for a

Stanje: novo, lastna masa: 14.800 kg, največja dovoljena obremenitev: 61.700 kg, skupna masa: 76.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 900 mm, velikost pnevmatike: 235/75/r17,5, barva: siv, Oprema: ABS, Gooseneck: • Gooseneck with rear chamfer of approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood flooring Loading Platform: • Extendable loading platform with rear chamfer of approx. 500 mm x 8° • 9 pairs of folding external lashing rings • 1 pair of recessed lashing rings at the front of the loading platform • Cutouts in the outer frame of the loading platform for attaching tension belts • Approx. 48 mm thick hardwood flooring, checker plate above the axles Landing Legs: • JOST mechanically operated landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: • BPW axles and suspension, 1st axle steering, 2nd and 3rd axle fixed, 4th and 5th axle follow-steering • Technical axle load: 12,000 kg • 1st, 4th, and 5th axles with electromagnetic reverse lock, activated via reverse gear or manually • Tyres: 235/75 R 17.5 3PMSF Brake System: • WABCO brake system in accordance with EU regulations including EBS-E (4S3M) Paintwork: • Premium and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a two-component (2K) zinc dust primer • High-quality single-color two-component (2K) topcoat in MB 7350 Novagrau • Rear section metallized and painted in RAL 9010 (Pure White) Steel Construction: • Steel structure made from high-strength fine-grain steels • Steel grades: • S355J2+N/S355MC (yield strength 355MPa) • S690QL/S700MC (yield strength 690MPa) Accessories: • One spare wheel with holder in front of the front wall • 2" king pin • Galvanized steel front wall, approx. 400 mm high • Front galvanized connection strip with yellow-red air couplings • 2 wheel chocks with holders mounted on the front wall • Rear mount on gooseneck for ALU drive-on ramps • Galvanized extendable wideners appx. 230 mm per side • Bracket for a beacon at the rear of the trailer • Galvanized supports under the chamfer of the loading platform • White reflector tape on the sides as per EU regulations, red at the extension and rear Isdpfx Abjma Hf Re Uotr • Mounts for warning panels including socket left and right at the gooseneck and rear panel • Detachable ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm • Rear galvanized plug-in stanchions removable (body length approx. 2,560 mm) • 3 pairs of WADER container pockets in the loading platform for a 20ft (30ft) or a 40ft container • 7 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform • Lifting axle on the front axle with TEBS E control according to the current axle load and loading condition • Movable mounting rails for ALU drive-on ramps at the rear of the vehicle • 20 x 20 mm square climbing strips at 200 mm intervals on the outer frame chamfer of the loading platform • BEKAMAX (Pico) centralized lubrication system with NLGI-2 standard grease and removable pump cover • Four extendable warning panels approx. 423 x 423 mm with a position light, extendable by approx. 400 mm • Holder for beacon mounted on the warning panels • European reflector plates (red-yellow) on the rear of the trailer • 80 km/h speed limit stickers at rear and both sides • Axle load gauge with load diagram included • HRM Metallisation (High Resistance Metallisation) of the outer frame • Complete steel structure is shot-blasted, then defined visible surfaces are metallized with ZINACOR 850 (zinc 85% - aluminum 15%) using hot finishing